AVAYA-SURV-MIB

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
INET-ADDRESS-MIB	RFC1155-SMI	AVAYAGEN-MIB

Imported symbols

OBJECT-GROUP	NOTIFICATION-GROUP	MODULE-COMPLIANCE
Integer32	Unsigned32	enterprises
Gauge32	Counter32	OBJECT-TYPE
MODULE-IDENTITY	NOTIFICATION-TYPE	RowStatus
TEXTUAL-CONVENTION	TruthValue	DateAndTime
TimeInterval	DisplayString	InetAddressType
InetAddress	InetPortNumber	InetAddressIPv6
IpAddress	avGatewayMibs

Defined Types

AvSurvStationEntry
SEQUENCE
	avSurvStationIndex	Integer32
	avSurvStationExt	DisplayString
	avSurvStationType	INTEGER
	avSurvStationInterfaceIndex	Integer32
	avSurvStationCOR	INTEGER
	avSurvStationTrunkDest	TruthValue
	avSurvStationRowStatus	RowStatus
	avSurvStationExpansionModule	TruthValue
	avSurvStationSlotPort	DisplayString
	avSurvStationSwitchHookFlash	TruthValue
	avSurvStationIpAddressRegistered	OCTET STRING
	avSurvStationName	DisplayString

AvSurvTrunkGroupEntry
SEQUENCE
	avSurvTrunkGroupNum	INTEGER
	avSurvTrunkGroupType	INTEGER
	avSurvTrunkGroupTAC	DisplayString
	avSurvTrunkGroupDial	INTEGER
	avSurvTrunkGroupRowStatus	RowStatus
	avSurvTrunkGroupDidDigitTreatment	INTEGER
	avSurvTrunkGroupDidDigitsInsert	DisplayString
	avSurvTrunkGroupDidSupervision	INTEGER
	avSurvTrunkGroupName	DisplayString
	avSurvTrunkGroupCodesetDisplay	INTEGER
	avSurvTrunkGroupCodesetNational	INTEGER
	avSurvTrunkGroupChannelPreference	INTEGER
	avSurvTrunkGroupDigitHandling	INTEGER
	avSurvTrunkGroupJapanDisconnect	INTEGER
	avSurvTrunkGroupSendName	INTEGER
	avSurvTrunkGroupSendCallingNumber	INTEGER
	avSurvTrunkGroupNumberingFormat	INTEGER
	avSurvTrunkGroupIncomingDestination	DisplayString
	avSurvTrunkGroupIncomingDialTone	INTEGER
	avSurvTrunkGroupR2MFCSignaling	INTEGER
	avSurvTrunkGroupTrunkHunt	INTEGER
	avSurvTrunkGroupDs1Supervision	INTEGER
	avSurvTrunkGroupCbc	INTEGER
	avSurvTrunkGroupCbcServiceFeature	INTEGER
	avSurvTrunkGroupCbcParameter	INTEGER
	avSurvTrunkGroupBusyDisconnect	INTEGER

AvSurvTrunkEntry
SEQUENCE
	avSurvTrunkGroupRefNumber	INTEGER
	avSurvTrunkIndex	Integer32
	avSurvTrunkInterfaceIndex	Integer32
	avSurvTrunkRowStatus	RowStatus
	avSurvTrunkSlotPort	DisplayString
	avSurvTrunkSigGroupRefNumber	INTEGER

AvSurvArsEntry
SEQUENCE
	avSurvDialIndex	Integer32
	avSurvDialString	DisplayString
	avSurvDialType	INTEGER
	avSurvDialMaximumLength	INTEGER
	avSurvDialGroupRefNumber	INTEGER
	avSurvDialAction	INTEGER
	avSurvDialRowStatus	RowStatus
	avSurvDialDeleteDigits	INTEGER
	avSurvDialInsertDigits	DisplayString
	avSurvDialMinimumLength	INTEGER

AvSurvFacEntry
SEQUENCE
	avSurvFacIndex	Integer32
	avSurvFacId	DisplayString
	avSurvFacRowStatus	RowStatus
	avSurvFacType	INTEGER

AvSurvIpVoiceCodecSetEntry
SEQUENCE
	avSurvIpVoiceCodecSetNum	Integer32
	avSurvIpVoiceCodecSetIndex	Integer32
	avSurvIpVoiceCodecSetPriority	INTEGER
	avSurvIpVoiceCodecSetType	INTEGER
	avSurvIpVoiceCodecSetSilence	TruthValue
	avSurvIpVoiceCodecSetFrames	INTEGER
	avSurvIpVoiceCodecSetRowStatus	RowStatus

AvSurvSlotConfigEntry
SEQUENCE
	avSurvSlotConfigIndex	Integer32
	avSurvSlotConfigNumberId	DisplayString
	avSurvSlotConfigBoardType	INTEGER
	avSurvSlotConfigRowStatus	RowStatus

AvSurvDs1Entry
SEQUENCE
	avSurvDs1Index	Integer32
	avSurvDs1Name	DisplayString
	avSurvDs1BitRate	INTEGER
	avSurvDs1SignalingMode	INTEGER
	avSurvDs1ChannelNumbering	INTEGER
	avSurvDs1Connect	INTEGER
	avSurvDs1Interface	INTEGER
	avSurvDs1Side	INTEGER
	avSurvDs1CountryProtocol	INTEGER
	avSurvDs1ProtocolVersion	INTEGER
	avSurvDs1BearerCapability	INTEGER
	avSurvDs1InterfaceCompanding	INTEGER
	avSurvDs1LongTimer	INTEGER
	avSurvDs1RowStatus	RowStatus
	avSurvDs1SlotNumberId	DisplayString

AvSurvSigGroupEntry
SEQUENCE
	avSurvSigGroupIndex	Integer32
	avSurvSigGroupChannelSelection	INTEGER
	avSurvSigGroupAssociatedSignaling	INTEGER
	avSurvSigGroupPrimaryDChannel	DisplayString
	avSurvSigGroupRowStatus	RowStatus

AvSurvBriEntry
SEQUENCE
	avSurvBriIndex	Integer32
	avSurvBriName	DisplayString
	avSurvBriInterface	INTEGER
	avSurvBriSide	INTEGER
	avSurvBriCountryProtocol	INTEGER
	avSurvBriBearerCapability	INTEGER
	avSurvBriInterfaceCompanding	INTEGER
	avSurvBriTeiAssignment	INTEGER
	avSurvBriDirectoryNumberA	DisplayString
	avSurvBriDirectoryNumberB	DisplayString
	avSurvBriSpidA	DisplayString
	avSurvBriSpidB	DisplayString
	avSurvBriEndpointInit	INTEGER
	avSurvBriLayer1Stable	INTEGER
	avSurvBriRowStatus	RowStatus
	avSurvBriSlotPortNumberId	DisplayString

AvSurvIncomingRoutingEntry
SEQUENCE
	avSurvIncomingRoutingGroupRefNumber	INTEGER
	avSurvIncomingRoutingIndex	Integer32
	avSurvIncomingRoutingMatchPattern	DisplayString
	avSurvIncomingRoutingLength	INTEGER
	avSurvIncomingRoutingDeleteDigits	INTEGER
	avSurvIncomingRoutingInsertDigits	DisplayString
	avSurvIncomingRoutingMode	INTEGER
	avSurvIncomingRoutingRowStatus	RowStatus

AvSurvNfasEntry
SEQUENCE
	avSurvNfasSigGroupRefNumber	INTEGER
	avSurvNfasIndex	Integer32
	avSurvNfasInterface	DisplayString
	avSurvNfasInterfaceId	INTEGER
	avSurvNfasRowStatus	RowStatus

Defined Values

avSurvMib		3.1.6889.2.6.4
R4.1 Standard Local Survivability (SLS) MIB This module defines an interface to Survivability mode of operation.This allows a gateway to have a basic set of call features if it loses communication with a main call controller (CC). When the gateway is in survivabilty mode of operation, it will continue to register to H.248 controller IP addresses in the MGC list. If a re-registration to the H.248 controller can be made, the survivability mode will be disabled and any new calls will be managed by the MGC. Active calls between two local IP phones will be maintained because they are established as shuffled calls. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification)embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisions. It is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties non-exclusive license to use this Specification in connection with the management of AVAYA products. This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. avSurvMib \| + .0 avSurvNotification \| + .1 avSurvConfig \| + .2 avSurvStationTable \| (index: avSurvStationIndex) \| + .3 avSurvTrunkGroupTable \| (index: avSurvTrunkGroupNum) \| + .4 avSurvTrunkTable \| (indexes: avSurvTrunkRefNumber, \| avSurvTrunkIndex) \| + .5 avSurvArsTable \| (index: avSurvDialIndex) \| + .6 avSurvFacTable \| (index: avSurvFacIndex) \| + .7 avSurvIpVoiceCodecSetTable \| (indexes: avSurvIpVoiceCodecSetNum,) \| avSurvIpVoiceCodecSetIndex) \| + .8 avSurvIpCodecSetConfig \| \| + .9 avSurvSlotConfigTable \| (index: avSurvSlotConfigIndex) \| + .10 avSurvDs1Table \| (index: avSurvDs1Index) \| + .11 avSurvSigGroupTable \| (index: avSurvSigGroupIndex) \| + .12 avSurvBriTable \| (index: avSurvBriIndex) \| + .13 avSurvIncomingRoutingTable \| (indexes: avSurvIncomingRoutingGroupRefNumber, \| avSurvIncomingRoutingIndex) \| + .14 avSurvNfasTable \| (indexes: avSurvNfasSigGroupRefNumber, \| avSurvNfasIndex) \| + .15 Add G430 values for avSurvMaxIPReg and avSurvBriIndex. \| Change avSurvBriIndex to be 1..64 instead of 1..24.
MODULE-IDENTITY

avSurvNotification		3.1.6889.2.6.4.0
OBJECT IDENTIFIER

avSurvEnabled		3.1.6889.2.6.4.0.1
This trap indicates that survivability.o has been administratively enabled.
Status: current	Access: read-only
NOTIFICATION-TYPE

avSurvDisabled		3.1.6889.2.6.4.0.2
This trap indicates that survivability.o has been administratively disabled.
Status: current	Access: read-only
NOTIFICATION-TYPE

avSurvActive		3.1.6889.2.6.4.0.3
This trap indicates that survivability.o is now the call controller of record and is processing calls.
Status: current	Access: read-only
NOTIFICATION-TYPE

avSurvInactive		3.1.6889.2.6.4.0.4
This trap indicates that survivability.o has stopped processing calls. A more powerful controller may have taken over, either an LSP or a primary call controller.
Status: current	Access: read-only
NOTIFICATION-TYPE

avSurvConfig		3.1.6889.2.6.4.1
OBJECT IDENTIFIER

avSurvAdminState		3.1.6889.2.6.4.1.1
Allows craft or PIM to enable the SLS call engine or read its current state
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

avSurvStatus		3.1.6889.2.6.4.1.2
Current operational status of SLS call engine
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

avSurvMaxIPReg		3.1.6889.2.6.4.1.3
Maximum IP phone registrations allowed. Gateway SLS firmware will restrict per model. G250 R3.0 = 10; G250 R3.1 and R4.0 = 12; G350 R4.0 = 72; IG550 [Juniper gateways(4350, 6350) R4.0 = 100; IG550 [Juniper gateways(2320, 2350) R4.1 = 100; G450 R4.1 =240 G430 = 150
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..240

avSurvDateFormat		3.1.6889.2.6.4.1.4
Date Format. This is used for calendar/clock display on DCP & IP phones
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mmDdYy(1), ddMmYy(2), yyMmDd(3)

avSurvEndDLTimeStamp		3.1.6889.2.6.4.1.5
Date/Timestamp of last download from PIM. This is written by PIM after it completes initialization of all configuration parameters
Status: current	Access: read-write
OBJECT-TYPE
	DateAndTime

avSurvNotificationSeverity		3.1.6889.2.6.4.1.6
Severity of last sent trap
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	cleared(1), indeterminate(2), critical(3), major(4), minor(5), warning(6)

avSurvConfigCommand		3.1.6889.2.6.4.1.7
Clear Running Configuration Command, write only
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

avSurvGatewayNumber		3.1.6889.2.6.4.1.8
Gateway Identification Number (see CM Media Gateway form)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..250

avSurvPimLockout		3.1.6889.2.6.4.1.9
Allows Craft to prevent PIM updates from being downloaded during local diagnostic session
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

avSurvAttendantAccessCode		3.1.6889.2.6.4.1.10
Allows a station in the branch office to be able to directly dial an attendant position
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..3)

avSurvAttendantExtension		3.1.6889.2.6.4.1.11
Specifies the station which shall serve as the branch office attendant position. Used as destination to direct un-routable incoming trunk calls.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..13)

avSurvStationTable		3.1.6889.2.6.4.2
Station Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvStationEntry

avSurvStationEntry		3.1.6889.2.6.4.2.1
Each entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvStationEntry

avSurvStationIndex		3.1.6889.2.6.4.2.1.1
Station Table Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..340

avSurvStationExt		3.1.6889.2.6.4.2.1.2
Station Extension number
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..13)

avSurvStationType		3.1.6889.2.6.4.2.1.3
Station model type
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ip4601(1), ip4602(2), ip4602Sw(3), ip4606(4), ip4610Sw(5), ip4612(6), ip4620(7), ip4620Sw(8), ip4624(9), analog2500(10), ip4621(11), ip4622(12), ip4625(13), dcp2402(20), dcp2410(21), dcp2420(22), dcp6402(30), dcp6402D(31), dcp6408(32), dcp6408plus(33), dcp6408D(34), dcp6408Dplus(35), dcp6416Dplus(36), dcp6424Dplus(37), dcp8403B(40), dcp8405B(41), dcp8405Bplus(42), dcp8405D(43), dcp8405Dplus(44), dcp8410B(45), dcp8410D(46), dcp8411B(47), dcp8411D(48), dcp8434D(49)

avSurvStationInterfaceIndex		3.1.6889.2.6.4.2.1.4
Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type. Note: This element has been deprecated in SLS R4.1. For legacy stations, use avSurvStationSlotPort to communicate slot-port info.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..2147483647

avSurvStationCOR		3.1.6889.2.6.4.2.1.5
Station Class of Outgoing Restriction (COR) level
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	emergency(1), internal(2), local(3), toll(4), unrestricted(5)

avSurvStationTrunkDest		3.1.6889.2.6.4.2.1.6
Station trunk destination. Can be used to answer incomming trunk calls
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

avSurvStationRowStatus		3.1.6889.2.6.4.2.1.7
Create/Delete a row entry
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvStationExpansionModule		3.1.6889.2.6.4.2.1.8
Station set has an expansion module in place. This is only allowed for the digital phones (IP and DCP. IP phone models 4620, 4621, 4625 may use EU24 and EU24BL. DCP phone models 2420 may use EU24 and EU24BL. DCP phone models 6416 and 6424 may use modesl 801A and XM24.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

avSurvStationSlotPort		3.1.6889.2.6.4.2.1.9
CM slot/port in the Vyxx format
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(4..4)

avSurvStationSwitchHookFlash		3.1.6889.2.6.4.2.1.10
Switchhook flash is allowed only for analog phones
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

avSurvStationIpAddressRegistered		3.1.6889.2.6.4.2.1.11
IP address of registered IP station. Note only for IP stations
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..4)

avSurvStationName		3.1.6889.2.6.4.2.1.12
Station or user's Name
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..27)

avSurvTrunkGroupTable		3.1.6889.2.6.4.3
Trunk Group Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvTrunkGroupEntry

avSurvTrunkGroupEntry		3.1.6889.2.6.4.3.1
Each entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvTrunkGroupEntry

avSurvTrunkGroupNum		3.1.6889.2.6.4.3.1.1
Trunk Group Number
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..2000

avSurvTrunkGroupType		3.1.6889.2.6.4.3.1.2
Trunk Group Type
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	analogLoopStart(1), analogDid(2), analogGroundStart(3), bri(4), t1InBandSignaling(5), t1IsdnSignaling(6), e1InBandSignaling(7), e1IsdnSignaling(8)

avSurvTrunkGroupTAC		3.1.6889.2.6.4.3.1.3
Trunk Group Trunk Access Code (TAC)
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..4)

avSurvTrunkGroupDial		3.1.6889.2.6.4.3.1.4
Trunk Group Outward Dial. Note MF not supported in SLS
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	rotary(1), dtmf(2), mf(3)

avSurvTrunkGroupRowStatus		3.1.6889.2.6.4.3.1.5
Create/Delete a row entry
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvTrunkGroupDidDigitTreatment		3.1.6889.2.6.4.3.1.6
Trunk Group DID digit treatment option. This applies for analog DID trunks and non-ISDN digital tie trunks. Note: blank means take no action.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	absorb1(1), absorb2(2), absorb3(3), absorb4(4), absorb5(5), insert1(11), insert2(12), insert3(13), insert4(14), blank(99)

avSurvTrunkGroupDidDigitsInsert		3.1.6889.2.6.4.3.1.7
Digit string to be inserted for DID treatment This applies for analog DID trunks and non-ISDN digital tie trunks.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..4)

avSurvTrunkGroupDidSupervision		3.1.6889.2.6.4.3.1.8
Type of incoming supervision used on DID trunk. This applies only for analog DID trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	immediate(1), wink(2)

avSurvTrunkGroupName		3.1.6889.2.6.4.3.1.9
Customer's name for trunk group
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..27)

avSurvTrunkGroupCodesetDisplay		3.1.6889.2.6.4.3.1.10
Which Q.931 codesets are allowed to send Display IE's to the user phones This applies only to ISDN BRI/PRI trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	codeset0(0), codeset6(6), codeset7(7)

avSurvTrunkGroupCodesetNational		3.1.6889.2.6.4.3.1.11
Which codesets are allowed to send National supported IE's. This applies only to ISDN BRI/PRI trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	codeset6(6), codeset7(7)

avSurvTrunkGroupChannelPreference		3.1.6889.2.6.4.3.1.12
Used for encoding Channel-ID IE. This applies only to ISDN BRI/PRI trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	exclusive(1), preferred(2)

avSurvTrunkGroupDigitHandling		3.1.6889.2.6.4.3.1.13
Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enblocEnbloc(0), enblocOverlap(1), overlapEnbloc(2), overlapOverlap(3)

avSurvTrunkGroupJapanDisconnect		3.1.6889.2.6.4.3.1.14
Send a Q.931 CONNECT msg right before sending DISCONNECT msg. This applies only to ISDN BRI/PRI trunks in Japan.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

avSurvTrunkGroupSendName		3.1.6889.2.6.4.3.1.15
Specifies whether Calling, Connected, Called party's name is to be shared with network. This applies only to ISDN BRI/PRI trunks. Default is no.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2), restricted(3)

avSurvTrunkGroupSendCallingNumber		3.1.6889.2.6.4.3.1.16
Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. Default is no.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2), restricted(3)

avSurvTrunkGroupNumberingFormat		3.1.6889.2.6.4.3.1.17
Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. SLS only supports unknown(1) and public(2). Default is unknown.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(1), public(2), private(3), unknownPrivate(4)

avSurvTrunkGroupIncomingDestination		3.1.6889.2.6.4.3.1.18
Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..13)

avSurvTrunkGroupIncomingDialTone		3.1.6889.2.6.4.3.1.19
Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

avSurvTrunkGroupR2MFCSignaling		3.1.6889.2.6.4.3.1.20
Determines MFC signaling set to be used. This only applies to R2MFC trunks. This feature not supported in SLS for R4.0
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	set1(1), set2(2), set3(3), set4(4), set5(5), set6(6), set7(7), set8(8)

avSurvTrunkGroupTrunkHunt		3.1.6889.2.6.4.3.1.21
Determines the method in which the SLS call engine selects from the trunk group pool of available trunks. This only applies to digital trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ascend(1), cyclical(2), descend(3)

avSurvTrunkGroupDs1Supervision		3.1.6889.2.6.4.3.1.22
Applies to non-ISDN DS1 trunks: Specifies the type of incomming/outgoing supervision that is used on these trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	loopStart(3), groundStart(4), winkWink(5), winkImmediate(6), winkAuto(7), immediateImmediate(8), autoAuto(9), autoWink(10)

avSurvTrunkGroupCbc		3.1.6889.2.6.4.3.1.23
Applies to ISDN DS1 trunks: Specifies whether the trunk is to operate in call-by-call basis. If yes, then send the NSF IE.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

avSurvTrunkGroupCbcServiceFeature		3.1.6889.2.6.4.3.1.24
Applies to ISDN DS1 trunks: Specifies the type of service or feature specifed in the NSF IE for outbound trunk calls. Only valid if CBC=yes.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	sdn(225), megacom(227), operator(197), suboperator(198), lds(231), scocs(246)

avSurvTrunkGroupCbcParameter		3.1.6889.2.6.4.3.1.25
Applies to ISDN DS1 trunks: Specifies the class of service being offered as part of Selective Class of Call Selection (scocs)service mode. Only valid if service mode is scocs.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..99999

avSurvTrunkGroupBusyDisconnect		3.1.6889.2.6.4.3.1.26
Applies to Analog Loop Start Trunks: Specifies whether the presence of busy tone signal will cause the trunk call to be disconnected. Default = no.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

avSurvTrunkTable		3.1.6889.2.6.4.4
Trunk table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvTrunkEntry

avSurvTrunkEntry		3.1.6889.2.6.4.4.1
Each entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvTrunkEntry

avSurvTrunkGroupRefNumber		3.1.6889.2.6.4.4.1.1
Trunk Pool Group Reference Number - Association of trunk pool with trunk group
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..2000

avSurvTrunkIndex		3.1.6889.2.6.4.4.1.2
trunk table index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

avSurvTrunkInterfaceIndex		3.1.6889.2.6.4.4.1.3
Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type Note: This element has been deprecated in SLS R4.1. For legacy trunks, use avSurvTrunkSlotPort to communicate slot-port info.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..2147483647

avSurvTrunkRowStatus		3.1.6889.2.6.4.4.1.4
Create/Delete a row entry
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvTrunkSlotPort		3.1.6889.2.6.4.4.1.5
ACM slot/port in the Vyxx format
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(4..4)

avSurvTrunkSigGroupRefNumber		3.1.6889.2.6.4.4.1.6
Signaling Group Number that is the manager of this ISDN trunk member
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..650

avSurvArsTable		3.1.6889.2.6.4.5
Automatic Route Selection (ARS) Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvArsEntry

avSurvArsEntry		3.1.6889.2.6.4.5.1
Each entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvArsEntry

avSurvDialIndex		3.1.6889.2.6.4.5.1.1
Call Pattern index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..100

avSurvDialString		3.1.6889.2.6.4.5.1.2
Dialed string entry that is used to match a pattern within the user-dialed number
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..18)

avSurvDialType		3.1.6889.2.6.4.5.1.3
Call Type
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	emergency(1), foreignNumberingPlanArea(2), homeNumberingPlanArea(3), international(4), internationalOperator(5), local(6), national(7), operator(8), service(9)

avSurvDialMaximumLength		3.1.6889.2.6.4.5.1.4
Maximum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the dialed string
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..28

avSurvDialGroupRefNumber		3.1.6889.2.6.4.5.1.5
Call group reference number
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..2000

avSurvDialAction		3.1.6889.2.6.4.5.1.6
Call dial action
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	denyCall(1), allowCall(2)

avSurvDialRowStatus		3.1.6889.2.6.4.5.1.7
Create/Delete a row entry
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvDialDeleteDigits		3.1.6889.2.6.4.5.1.8
Specifies the number of dialed digits to be deleted from the beginning of the string
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..28

avSurvDialInsertDigits		3.1.6889.2.6.4.5.1.9
Specifies the digit string to be inserted. Includes ',' for pause.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..36)

avSurvDialMinimumLength		3.1.6889.2.6.4.5.1.10
Minimum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the avSurvDialString element
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..28

avSurvFacTable		3.1.6889.2.6.4.6
Automatic Route Selection Facility Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvFacEntry

avSurvFacEntry		3.1.6889.2.6.4.6.1
Each entry contains index, an ARS Facility dialing code and the Type of FAC feature
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvFacEntry

avSurvFacIndex		3.1.6889.2.6.4.6.1.1
Fac Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..20

avSurvFacId		3.1.6889.2.6.4.6.1.2
ARS Facility dialing code
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..4)

avSurvFacRowStatus		3.1.6889.2.6.4.6.1.3
Create/Delete a row entry
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvFacType		3.1.6889.2.6.4.6.1.4
Feature Access Code(FAC) dial codes Supported
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ars1(1), ars2(2), hold(3), contactOpen(4), contactClose(5), contactPulse(6)

avSurvIpVoiceCodecSetTable		3.1.6889.2.6.4.7
Ip Voice Codec Set Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvIpVoiceCodecSetEntry

avSurvIpVoiceCodecSetEntry		3.1.6889.2.6.4.7.1
Each entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvIpVoiceCodecSetEntry

avSurvIpVoiceCodecSetNum		3.1.6889.2.6.4.7.1.1
Ip Codec Set Identification
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..7

avSurvIpVoiceCodecSetIndex		3.1.6889.2.6.4.7.1.2
Ip Codec Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..7

avSurvIpVoiceCodecSetPriority		3.1.6889.2.6.4.7.1.3
Priority of codec set type (determines preferential use)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..7

avSurvIpVoiceCodecSetType		3.1.6889.2.6.4.7.1.4
Ip Codec Type
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	g711u(1), g711a(2), g723(3), g729(4), g729a(5), g729b(6), g729ab(7)

avSurvIpVoiceCodecSetSilence		3.1.6889.2.6.4.7.1.5
IP Codec Silence Suppression
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

avSurvIpVoiceCodecSetFrames		3.1.6889.2.6.4.7.1.6
IP Codec number of frames
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..6

avSurvIpVoiceCodecSetRowStatus		3.1.6889.2.6.4.7.1.7
Create/Delete a row entry
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvIpCodecSetConfig		3.1.6889.2.6.4.8
OBJECT IDENTIFIER

avSurvIpCodecSetFaxMode		3.1.6889.2.6.4.8.1
Fax operational protocol mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	off(1), relay(2), passthru(3), t38(4)

avSurvIpCodecSetFaxRedundancy		3.1.6889.2.6.4.8.2
Redundant packets encoded during fax mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..3

avSurvIpCodecSetModemMode		3.1.6889.2.6.4.8.3
Data modem protocol mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	off(1), relay(2), passthru(3)

avSurvIpCodecSetModemRedundancy		3.1.6889.2.6.4.8.4
Redundant packets encoded for Modem mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..3

avSurvIpCodecSetTtyMode		3.1.6889.2.6.4.8.5
TTY protocol mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	off(1), us(2), uk(3), passthru(4)

avSurvIpCodecSetTtyRedundancy		3.1.6889.2.6.4.8.6
Redundant packets encoded for TTY mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..3

avSurvIpCodecSetClearChanMode		3.1.6889.2.6.4.8.7
Clear channel protocol mode. Preference for G711 wrapping
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

avSurvIpCodecSetClearChanRedundancy		3.1.6889.2.6.4.8.8
Redundant packets encoded for clear channel mode
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..1

avSurvIpCodecSetEncryptPriority1		3.1.6889.2.6.4.8.9
Media Encryption type - 1st priority
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	aes(1), aea(2), none(3)

avSurvIpCodecSetEncryptPriority2		3.1.6889.2.6.4.8.10
Media Encryption type - 2nd priority
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	aes(1), aea(2), none(3), unused(4)

avSurvIpCodecSetEncryptPriority3		3.1.6889.2.6.4.8.11
Media Encryption type - 3rd priority
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	aes(1), aea(2), none(3), unused(4)

avSurvSlotConfigTable		3.1.6889.2.6.4.9
Slot Configuration Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvSlotConfigEntry

avSurvSlotConfigEntry		3.1.6889.2.6.4.9.1
Each entry contains an index, number id, board type, and row status
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvSlotConfigEntry

avSurvSlotConfigIndex		3.1.6889.2.6.4.9.1.1
Slot Config Table Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..10

avSurvSlotConfigNumberId		3.1.6889.2.6.4.9.1.2
This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(2)

avSurvSlotConfigBoardType		3.1.6889.2.6.4.9.1.3
Type of media module in the associated slot mm312 has 24 low-density DCP station ports mm710 has one DS1 interface mm711 has 8 port universal analog mm712 has 8 DCP station ports mm714 has 4 analog trunk ports and 4 analog station ports mm716 has 24 high-density analog station ports mm717 has 24 high-density DCP station ports mm720 has 8 bri trunk ports (16 channels) mm722 has 2 bri trunk ports (4 channels) anaImm1t2l is G250 Internal media module 1 Analog Trunk + 2 Analog Lines anaImm4t2l is G250 Internal media module 4 Analog Trunks + 2 Analog Lines briImm is G250 Internal media module 2 port BRI dcpImm is G250 Internal media module 12 port DCP ds1Imm is G250 Internal media module DS1 tgm550 is IG550 telephony gateway module with 2 Analog Trunks + 2 Analog Lines tim508 is IG550 telephony interface module 8 analog station ports tim510 is IG550 telephony interface module DS1 tim514 is IG550 telephony interface module 4 Analog Trunks + 2 Analog stations tim516 is IG550 telephony interface module 16 analog station ports tim518 is IG550 telephony interface module 8 analog stations and 8 analog trunks tim521 is IG550 telephony interface module 4 port BRI
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	mm312(32), mm710(5), mm711(4), mm712(3), mm714(7), mm716(22), mm717(14), mm720(2), mm722(8), anaImm1t2l(9), anaImm4t2l(16), briImm(17), dcpImm(18), ds1Imm(19), tgm550(23), tim508(29), tim510(25), tim514(24), tim516(30), tim518(31), tim521(26)

avSurvSlotConfigRowStatus		3.1.6889.2.6.4.9.1.4
Create/Delete a row entry in this table
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvDs1Table		3.1.6889.2.6.4.10
DS1 trunk instantiation Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvDs1Entry

avSurvDs1Entry		3.1.6889.2.6.4.10.1
Each entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id.
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvDs1Entry

avSurvDs1Index		3.1.6889.2.6.4.10.1.1
DS1 Table Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..4

avSurvDs1Name		3.1.6889.2.6.4.10.1.2
Name of the service provider and/or site destination of DS1 facility
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..15)

avSurvDs1BitRate		3.1.6889.2.6.4.10.1.3
Maximum transmission rate for DS1 interface
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	rate1544(1), rate2048(2)

avSurvDs1SignalingMode		3.1.6889.2.6.4.10.1.4
Selects the signaling method deployed on the given DS1 facility
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	cas(1), robbedBit(2), isdnPri(3), isdnExt(4)

avSurvDs1ChannelNumbering		3.1.6889.2.6.4.10.1.5
Channel numbering scheme; E1 interface for ETSI and QSIG requires sequential encoding from 1 to 30
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	sequential(1), timeSlot(2)

avSurvDs1Connect		3.1.6889.2.6.4.10.1.6
Specifies what type of equipment is at the far end of the DS1 link
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	host(1), network(2), pbx(3), lineSide(4)

avSurvDs1Interface		3.1.6889.2.6.4.10.1.7
Determines glare handling
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	user(0), network(1), peerMaster(3), peerSlave(4)

avSurvDs1Side		3.1.6889.2.6.4.10.1.8
QSIG glare handling when interface field is peerSlave
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	a(0), b(1)

avSurvDs1CountryProtocol		3.1.6889.2.6.4.10.1.9
Specifies the Layer 3 signaling protocol used by the country-specific service provider. This applies to ISDN trunk.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	country1(1), country2(2), country3(3), country4(4), country5(5), country6(6), country7(7), country8(8), country9(9), country10(10), country11(11), country12(12), country13(13), country14(14), country15(15), country16(16), country17(17), country18(18), country19(19), country20(20), country21(21), country22(22), country23(23), country24(24), country25(25), etsi(62), qsig(63)

avSurvDs1ProtocolVersion		3.1.6889.2.6.4.10.1.10
Used in countries whose public networks allow multiple Layer-3 signaling protocols for ISDN PRI service.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	a(0), b(1), c(2), d(3)

avSurvDs1BearerCapability		3.1.6889.2.6.4.10.1.11
Sets the information transfer capability in the Bearer Capability IE of SETUP message for ISDN PRI service.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	threeKhz(0), speech(1)

avSurvDs1InterfaceCompanding		3.1.6889.2.6.4.10.1.12
Specifies the companding method used by the far-end switch
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	alaw(1), ulaw(2)

avSurvDs1LongTimer		3.1.6889.2.6.4.10.1.13
Specifies whether the duration of the T302 and T303 Q.931 timers should be extended to a longer duration. Used for Russia country code
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	no(1), yes(2)

avSurvDs1RowStatus		3.1.6889.2.6.4.10.1.14
Create/Delete a row entry in this table
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvDs1SlotNumberId		3.1.6889.2.6.4.10.1.15
This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(2)

avSurvSigGroupTable		3.1.6889.2.6.4.11
Signaling Group, associated with an ISDN trunk group, Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvSigGroupEntry

avSurvSigGroupEntry		3.1.6889.2.6.4.11.1
Each entry contains an index, channel selection, associated signaling, primary D channel, and row status
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvSigGroupEntry

avSurvSigGroupIndex		3.1.6889.2.6.4.11.1.1
SigGroup Table Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..650

avSurvSigGroupChannelSelection		3.1.6889.2.6.4.11.1.2
If there is more than one trunk group assigned to this signaling group, the channel selection number is the trunk group that can accept incoming calls
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..2000

avSurvSigGroupAssociatedSignaling		3.1.6889.2.6.4.11.1.3
Specifies whether the D-channel is physically associated in the DS1 facility, yes = D-channel present
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

avSurvSigGroupPrimaryDChannel		3.1.6889.2.6.4.11.1.4
The identity for the D-channel 3 digit gw number + 2 character slot number + 2 digit port circuit number
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(7)

avSurvSigGroupRowStatus		3.1.6889.2.6.4.11.1.5
Create/Delete a row entry in this table
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvBriTable		3.1.6889.2.6.4.12
BRI trunk instantiation Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvBriEntry

avSurvBriEntry		3.1.6889.2.6.4.12.1
Each entry contains an index, name, interface, side, country-protocol, bearer-capability, interface-companding, tei-assignment, directory-numberA, directory-numberB, spidA, spidB, endpoint-initialization, layer1-stable, and slot-number-id. This table instantiation completely specifies a BRI circuit, consisting of channel B1 and channel B2
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvBriEntry

avSurvBriIndex		3.1.6889.2.6.4.12.1.1
BRI Table Index Note: G250-BRI supports 2 ports (4-channels) G350/IG550 is allocated a max of 24 ports (48-channels) G430/G450 is allocated a max of 64 ports (128 channels).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..64

avSurvBriName		3.1.6889.2.6.4.12.1.2
Name of the service provider and/or site destination of BRI facility
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..15)

avSurvBriInterface		3.1.6889.2.6.4.12.1.3
Determines glare handling. Non-QSIG calls: a-network, b-user; QSIG calls: a-peerMaster, b-peerSlave
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	user(0), network(1), peerMaster(3), peerSlave(4)

avSurvBriSide		3.1.6889.2.6.4.12.1.4
QSIG glare handling when interface field is peerSlave
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	a(0), b(1)

avSurvBriCountryProtocol		3.1.6889.2.6.4.12.1.5
Specifies the Layer 3 signaling protocol used by the country-specific service provider
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	country1(1), country2(2), country3(3), country4(4), country5(5), country6(6), country7(7), country8(8), country9(9), country10(10), country11(11), country12(12), country13(13), country14(14), country15(15), country16(16), country17(17), country18(18), country19(19), country20(20), country21(21), country22(22), country23(23), country24(24), country25(25), etsi(62), qsig(63)

avSurvBriBearerCapability		3.1.6889.2.6.4.12.1.6
Sets the information transfer capability in the Bearer Capability IE of SETUP message
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	threeKhz(0), speech(1)

avSurvBriInterfaceCompanding		3.1.6889.2.6.4.12.1.7
Specifies the companding method used )for all circuits on this media module) by the far-end switch
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	alaw(1), ulaw(2)

avSurvBriTeiAssignment		3.1.6889.2.6.4.12.1.8
LAPD address assignment for TEI field, auto is assigned by network provider
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), zero(2)

avSurvBriDirectoryNumberA		3.1.6889.2.6.4.12.1.9
Channel B1's directory number
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

avSurvBriDirectoryNumberB		3.1.6889.2.6.4.12.1.10
Channel B2's directory number
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..10)

avSurvBriSpidA		3.1.6889.2.6.4.12.1.11
Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B1
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..14)

avSurvBriSpidB		3.1.6889.2.6.4.12.1.12
Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B2
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..14)

avSurvBriEndpointInit		3.1.6889.2.6.4.12.1.13
Determines whether the far end supports endpoint initialization
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

avSurvBriLayer1Stable		3.1.6889.2.6.4.12.1.14
Determines whether to expect the network to drop BRI layer 1 when no calls are active. yes = keep layer 1 stable
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

avSurvBriRowStatus		3.1.6889.2.6.4.12.1.15
Create/Delete a row entry in this table
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvBriSlotPortNumberId		3.1.6889.2.6.4.12.1.16
This is the string identifier formed by the combination of the slot identifier that CM uses to identify the slot of the media gateway(first character is a v followed by one numeric character). The port consists of two numeric characters that identify the first B-channel of the physical BRI port circuit(for example the 1st port is always 01).
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(4..4)

avSurvIncomingRoutingTable		3.1.6889.2.6.4.13
Incoming Routing Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvIncomingRoutingEntry

avSurvIncomingRoutingEntry		3.1.6889.2.6.4.13.1
Each entry contains a dual index(trunk-group-reference-number and table index), match-pattern, delete-digits, insert-digits specification and routing-mode. This table instantiation completely specifies an the digit handling for an incoming dial-string pattern. Note 1: If the trunk-group employs Overlap Receiving, there will only be one entry (this may only have a delete or an insert operand). Note 2: If the trunk-group employs Enbloc Receiving, there may be a maximum of 50 entries. Each entry will have a Match-pattern, Length, Delete, and Insert element.
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvIncomingRoutingEntry

avSurvIncomingRoutingGroupRefNumber		3.1.6889.2.6.4.13.1.1
Incoming trunk-group reference number
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..2000

avSurvIncomingRoutingIndex		3.1.6889.2.6.4.13.1.2
Incoming Routing Table Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..50

avSurvIncomingRoutingMatchPattern		3.1.6889.2.6.4.13.1.3
Dial-string entry that is used to match a pattern on inbound trunk calls. Note that '0' is used to designate the blank or empty string value as a wild card match.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..16)

avSurvIncomingRoutingLength		3.1.6889.2.6.4.13.1.4
Maximum length of the user-dialed number that the SLS call-engine collects before beginning the pattern matching. Note that CM uses the blank as a wild card, subject to rule of the MatchPattern field being set to a wild card value as well.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	len0(0), len1(1), len2(2), len3(3), len4(4), len5(5), len6(6), len7(7), len8(8), len9(9), len10(10), len11(11), len12(12), len13(13), len14(14), len15(15), len16(16), len17(17), len18(18), len19(19), len20(20), len21(21), blank(99)

avSurvIncomingRoutingDeleteDigits		3.1.6889.2.6.4.13.1.5
Specifies the number of dialed digits to be deleted from the beginning of the incoming trunk's received digit string
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..21

avSurvIncomingRoutingInsertDigits		3.1.6889.2.6.4.13.1.6
Specifies the digit string to be inserted (after the deletion process has been completed) to the incoming trunk digit string
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..16)

avSurvIncomingRoutingMode		3.1.6889.2.6.4.13.1.7
Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enbloc(0), overlap(1)

avSurvIncomingRoutingRowStatus		3.1.6889.2.6.4.13.1.8
Create/Delete a row entry in this table
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

avSurvNfasTable		3.1.6889.2.6.4.14
Signaling Group Nfas , associated with an ISDN trunk group, Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvSurvNfasEntry

avSurvNfasEntry		3.1.6889.2.6.4.14.1
Each entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status
Status: current	Access: not-accessible
OBJECT-TYPE
	AvSurvNfasEntry

avSurvNfasSigGroupRefNumber		3.1.6889.2.6.4.14.1.1
Entry pointing to the associated signaling group number in the signaling group table
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..650

avSurvNfasIndex		3.1.6889.2.6.4.14.1.2
Nfas Table Index
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..10

avSurvNfasInterface		3.1.6889.2.6.4.14.1.3
The identity for the NFAS DS1 facility group: 3 digit gateway number + 2 character slot number
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(5)

avSurvNfasInterfaceId		3.1.6889.2.6.4.14.1.4
For an NFAS circuit, this specifies the identification number of the DS1 circuit that is associated with this NFAS group. Note that this ID number must be coordinated with the PSTN provider so that the signaling protocol will operate correctly with respect to physical facility circuit selection.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..31

avSurvNfasRowStatus		3.1.6889.2.6.4.14.1.5
Create/Delete a row entry in this table
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus