ATTO6500N-MIB

File: ATTO6500N-MIB.mib (41454 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF

Imported symbols

DisplayString NOTIFICATION-TYPE OBJECT-TYPE
MODULE-IDENTITY enterprises Integer32
Unsigned32 DateAndTime TimeInterval
TEXTUAL-CONVENTION MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP

Defined Types

DisplayWWN  
A Fibre Channel/SAS World Wide Name.
TEXTUAL-CONVENTION    
  OCTET STRING Size(8)  

QSFPTech  
Defines the various QSFP Technologies.
TEXTUAL-CONVENTION    
  INTEGER unknown(-1), optical(1), activecopper(2), passivecopper(3)  

PHYStatus  
Operational state of a SAS phy
TEXTUAL-CONVENTION    
  INTEGER unknown(-1), online(1), offline(2)  

FCSFPInfoEntry  
SEQUENCE    
  fcSFPIndex Integer32
  fcSFPVendor DisplayString
  fcSFPSerialNum DisplayString
  fcSFPPartNum DisplayString
  fcSFPDataRateCapability INTEGER

SASQSFPInfoEntry  
SEQUENCE    
  sasQSFPIndex Integer32
  sasQSFPVendor DisplayString
  sasQSFPSerialNum DisplayString
  sasQSFPType QSFPTech
  sasQSFPPartNum DisplayString

FCPortInfoEntry  
SEQUENCE    
  fcPortIndex Integer32
  fcPortPortNumber Integer32
  fcPortOperationalState INTEGER
  fcPortAdminState INTEGER
  fcPortDataRateNegotiated INTEGER
  fcPortConnModeNegotiated INTEGER
  fcPortDataRateConfigured INTEGER
  fcPortConnModeConfigured INTEGER
  fcPortDataRateCapability INTEGER
  fcPortNodeName DisplayWWN
  fcPortPortName DisplayWWN
  fcPortPeerName DisplayWWN

FcPortStatisticsEntry  
SEQUENCE    
  fcStatsIndex Integer32
  fcStatsTxWords Unsigned32
  fcStatsRxWords Unsigned32
  fcStatsTimeSinceReset TimeInterval
  fcStatsErrLinkFailure Unsigned32
  fcStatsErrLossOfSync Unsigned32
  fcStatsErrInvalidCRC Unsigned32
  fcStatsErrInvalidTxWords Unsigned32
  fcStatsErrLipCount Unsigned32
  fcStatsErrNOSCount Unsigned32
  fcStatsErrSignalLoss Unsigned32
  fcStatsErrPrimitive Unsigned32

SASPortInfoEntry  
SEQUENCE    
  sasPortIndex Integer32
  sasPortPortNumber Integer32
  sasPortOperationalState INTEGER
  sasPortPhy1State PHYStatus
  sasPortPhy2State PHYStatus
  sasPortPhy3State PHYStatus
  sasPortPhy4State PHYStatus
  sasPortAdminState INTEGER
  sasPortDataRateCapability INTEGER
  sasPortDataRateNegotiated INTEGER
  sasPortAddress DisplayWWN

SasPHYStatisticsEntry  
SEQUENCE    
  sasPhyStatsIndex Integer32
  sasPhyStatsTimeSinceReset TimeInterval
  sasPhyStatsErrLinkChanged Unsigned32
  sasPhyStatsErrInvalidCRC Unsigned32
  sasPhyStatsErrPhyReset Unsigned32
  sasPhyStatsErrLossOfSync Unsigned32
  sasPhyStatsErrDisparityCount Unsigned32
  sasPhyStatsErrInvalidDwords Unsigned32

TrapClientEntry  
SEQUENCE    
  trapClientIndex Integer32
  trapClientIpAddress DisplayString
  trapClientPort Integer32
  trapClientFilter INTEGER

Defined Values

bridge 1.3.6.1.4.1.4547.2.3
ATTO 6500N Custom MIB
MODULE-IDENTITY    

attotech 1.3.6.1.4.1.4547
OBJECT IDENTIFIER    

attoProducts 1.3.6.1.4.1.4547.1
OBJECT IDENTIFIER    

attoMgmt 1.3.6.1.4.1.4547.2
OBJECT IDENTIFIER    

attoModules 1.3.6.1.4.1.4547.3
OBJECT IDENTIFIER    

attoAgentCapability 1.3.6.1.4.1.4547.4
OBJECT IDENTIFIER    

bridgeTraps 1.3.6.1.4.1.4547.2.3.0
OBJECT IDENTIFIER    

bridgeIdentity 1.3.6.1.4.1.4547.2.3.1
OBJECT IDENTIFIER    

bridgeChassis 1.3.6.1.4.1.4547.2.3.2
OBJECT IDENTIFIER    

bridgePorts 1.3.6.1.4.1.4547.2.3.3
OBJECT IDENTIFIER    

bridgeConfig 1.3.6.1.4.1.4547.2.3.4
OBJECT IDENTIFIER    

bridgeTrapInfo 1.3.6.1.4.1.4547.2.3.5
OBJECT IDENTIFIER    

bridgeMIBConformance 1.3.6.1.4.1.4547.2.3.6
OBJECT IDENTIFIER    

bridgeMIBCompliances 1.3.6.1.4.1.4547.2.3.6.1
OBJECT IDENTIFIER    

bridgeMIBGroups 1.3.6.1.4.1.4547.2.3.6.2
OBJECT IDENTIFIER    

bridgeBasicCompliance 1.3.6.1.4.1.4547.2.3.6.1.1
The requirements for a bridge implementation.
MODULE-COMPLIANCE    

bridgeIdentityBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.1
The bridge identity information group.
OBJECT-GROUP    

bridgeChassisBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.2
The bridge chassis information group.
OBJECT-GROUP    

bridgFcPortInfoBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.3
The bridge ports information group.
OBJECT-GROUP    

bridgeFcPortStatisicsBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.4
The bridge ports information group.
OBJECT-GROUP    

bridgeSasPortInfoBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.5
The bridge ports information group.
OBJECT-GROUP    

bridgeSasPortStatisicsBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.6
The bridge ports information group.
OBJECT-GROUP    

bridgeConfigBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.7
The bridge configuration information group.
OBJECT-GROUP    

bridgeTrapInfoBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.8
The bridge trap information group.
OBJECT-GROUP    

bridgeTrapsBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.9
The bridge traps group.
NOTIFICATION-GROUP    

bridgeUniqueId 1.3.6.1.4.1.4547.2.3.1.1
8-octets uniquely identifying this HW element.
OBJECT-TYPE    
  DisplayWWN  

vendorID 1.3.6.1.4.1.4547.2.3.1.2
Vendor ID for this HW element.
OBJECT-TYPE    
  DisplayString Size(0..32)  

modelName 1.3.6.1.4.1.4547.2.3.1.3
Product/Model name of this HW element.
OBJECT-TYPE    
  DisplayString Size(0..32)  

primaryFirmwareRevision 1.3.6.1.4.1.4547.2.3.1.4
Build Number, Version Number and Base Version for the firmware on the primary partition (active firmware image).
OBJECT-TYPE    
  DisplayString Size(0..20)  

primaryFirmwareBuildDate 1.3.6.1.4.1.4547.2.3.1.5
Active firmware image build date and time (no time zone offset).
OBJECT-TYPE    
  DateAndTime Size(8)  

hardwareVersion 1.3.6.1.4.1.4547.2.3.1.6
Current version of 6500N hardware.
OBJECT-TYPE    
  Integer32  

secondaryFirmwareRevision 1.3.6.1.4.1.4547.2.3.1.7
Version Number and Build Number for the firmware on the secondary partition (backup firmware image).
OBJECT-TYPE    
  DisplayString Size(0..12)  

secondaryFirmwareBuildDate 1.3.6.1.4.1.4547.2.3.1.8
Backup Firmware image build date and time (no time zone offset).
OBJECT-TYPE    
  DateAndTime Size(8)  

serialNumber 1.3.6.1.4.1.4547.2.3.1.9
Serial Number of this HW element.
OBJECT-TYPE    
  DisplayString Size(0..32)  

bridgeName 1.3.6.1.4.1.4547.2.3.1.10
User defined symbolic name assigned to this HW element.
OBJECT-TYPE    
  DisplayString Size(0..32)  

lastReboot 1.3.6.1.4.1.4547.2.3.2.1
Date and time of last reboot.
OBJECT-TYPE    
  DateAndTime Size(8)  

uptime 1.3.6.1.4.1.4547.2.3.2.2
Time since last reboot, in units of 0.01 seconds
OBJECT-TYPE    
  TimeInterval  

lastRebootReason 1.3.6.1.4.1.4547.2.3.2.3
Plain text reason for last reboot.
OBJECT-TYPE    
  DisplayString Size(0..100)  

minimumOperatingTemp 1.3.6.1.4.1.4547.2.3.2.4
Minimum Safe Operating Temperature, in degrees C
OBJECT-TYPE    
  Integer32  

maximumOperatingTemp 1.3.6.1.4.1.4547.2.3.2.5
Maximum Safe Operating Temperature, in degrees C
OBJECT-TYPE    
  Integer32  

temperatureHighAlertSetting 1.3.6.1.4.1.4547.2.3.2.6
High temperature warning threshold, in degrees C
OBJECT-TYPE    
  Integer32  

temperatureLowAlertSetting 1.3.6.1.4.1.4547.2.3.2.7
Low temperature warning threshold, in degrees C
OBJECT-TYPE    
  Integer32  

chassisTemperature 1.3.6.1.4.1.4547.2.3.2.8
Current Chassis Temperature, in degrees C
OBJECT-TYPE    
  Integer32  

chassisTemperatureStatus 1.3.6.1.4.1.4547.2.3.2.9
The current sensor status (normal, warning or critical). Normal indicates the temperature for this HW element is within the safe range. Warning indicates that the temperature for this HW element has passed the warning threshold but is still within the safe range. Critical indicates that the temperature for this HW element is not within the safe operating temperature range.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), critical(3)  

dramSingleBitErrorCount 1.3.6.1.4.1.4547.2.3.2.10
Number of Single-bit ECC errors since last reboot
OBJECT-TYPE    
  Integer32  

chassisThroughputStatus 1.3.6.1.4.1.4547.2.3.2.11
Overall bridge throughput status (normal, warning). Normal indicates that there is no data bottleneck. Warning indicates that the aggregate fibre channel throughput has exceeded 50,000 IOPS.
OBJECT-TYPE    
  INTEGER normal(1), warning(2)  

fcSFPInfoTable 1.3.6.1.4.1.4547.2.3.2.12
Stores configuration information relating to installed FibreChannel SFPs.
OBJECT-TYPE    
  SEQUENCE OF  
    FCSFPInfoEntry

sasQSFPInfoTable 1.3.6.1.4.1.4547.2.3.2.13
Stores configuration information relating to installed SAS QSFPs.
OBJECT-TYPE    
  SEQUENCE OF  
    SASQSFPInfoEntry

fcSFPInfoEntry 1.3.6.1.4.1.4547.2.3.2.12.1
Stores information about installed fibre channel SFPs.
OBJECT-TYPE    
  FCSFPInfoEntry  

fcSFPIndex 1.3.6.1.4.1.4547.2.3.2.12.1.1
Used to index the SFP in the SFP Info table.
OBJECT-TYPE    
  Integer32 1..2  

fcSFPVendor 1.3.6.1.4.1.4547.2.3.2.12.1.2
SFP vendor name
OBJECT-TYPE    
  DisplayString Size(0..16)  

fcSFPSerialNum 1.3.6.1.4.1.4547.2.3.2.12.1.3
SFP serial number
OBJECT-TYPE    
  DisplayString Size(0..16)  

fcSFPPartNum 1.3.6.1.4.1.4547.2.3.2.12.1.4
SFP vendor-supplied part number
OBJECT-TYPE    
  DisplayString Size(0..16)  

fcSFPDataRateCapability 1.3.6.1.4.1.4547.2.3.2.12.1.5
Maximum data rate capability of the fibre channel SFP.
OBJECT-TYPE    
  INTEGER gb2(2), gb4(4), gb8(8), gb16(16)  

sasQSFPInfoEntry 1.3.6.1.4.1.4547.2.3.2.13.1
Stores information about installed SAS QSFPs.
OBJECT-TYPE    
  SASQSFPInfoEntry  

sasQSFPIndex 1.3.6.1.4.1.4547.2.3.2.13.1.1
Used to index the QSFP in the QSFP Info table.
OBJECT-TYPE    
  Integer32 1..2  

sasQSFPVendor 1.3.6.1.4.1.4547.2.3.2.13.1.2
QSFP vendor name
OBJECT-TYPE    
  DisplayString Size(0..16)  

sasQSFPSerialNum 1.3.6.1.4.1.4547.2.3.2.13.1.3
QSFP serial number
OBJECT-TYPE    
  DisplayString Size(0..16)  

sasQSFPType 1.3.6.1.4.1.4547.2.3.2.13.1.4
QSFP type
OBJECT-TYPE    
  QSFPTech  

sasQSFPPartNum 1.3.6.1.4.1.4547.2.3.2.13.1.5
QSFP vendor-supplied part number
OBJECT-TYPE    
  DisplayString Size(0..16)  

fcPortInfoTable 1.3.6.1.4.1.4547.2.3.3.1
Stores fibre channel specific information for each fibre channel port.
OBJECT-TYPE    
  SEQUENCE OF  
    FCPortInfoEntry

fcPortStatisticsTable 1.3.6.1.4.1.4547.2.3.3.2
Stores fibre channel specific I/O and error statistics for each fibre channel port.
OBJECT-TYPE    
  SEQUENCE OF  
    FcPortStatisticsEntry

sasPortInfoTable 1.3.6.1.4.1.4547.2.3.3.3
Stores SAS specific information for each SAS port.
OBJECT-TYPE    
  SEQUENCE OF  
    SASPortInfoEntry

sasPhyStatisticsTable 1.3.6.1.4.1.4547.2.3.3.4
Stores SAS specific I/O and error statistics for each SAS PHY.
OBJECT-TYPE    
  SEQUENCE OF  
    SasPHYStatisticsEntry

fcPortInfoEntry 1.3.6.1.4.1.4547.2.3.3.1.1
Stores state and capability information about the fibre channel ports.
OBJECT-TYPE    
  FCPortInfoEntry  

fcPortIndex 1.3.6.1.4.1.4547.2.3.3.1.1.1
Used to index the fibre channel port in the FC Port Entry table.
OBJECT-TYPE    
  Integer32 1..2  

fcPortPortNumber 1.3.6.1.4.1.4547.2.3.3.1.1.2
The fibre channel port number.
OBJECT-TYPE    
  Integer32 1..2  

fcPortOperationalState 1.3.6.1.4.1.4547.2.3.3.1.1.3
Operational state of the fibre channel port.
OBJECT-TYPE    
  INTEGER unknown(-1), online(1), offline(2)  

fcPortAdminState 1.3.6.1.4.1.4547.2.3.3.1.1.4
Administrative state of the fibre channel port. Indicates whether the port is enabled or disabled.
OBJECT-TYPE    
  INTEGER unknown(-1), disabled(1), enabled(2)  

fcPortDataRateNegotiated 1.3.6.1.4.1.4547.2.3.3.1.1.5
Current negotiated data rate of fibre channel port.
OBJECT-TYPE    
  INTEGER unknown(-1), gb2(2), gb4(4), gb8(8)  

fcPortConnModeNegotiated 1.3.6.1.4.1.4547.2.3.3.1.1.6
Current negotiated mode of the fibre channel port.
OBJECT-TYPE    
  INTEGER unknown(-1), loop(1), ptp(2)  

fcPortDataRateConfigured 1.3.6.1.4.1.4547.2.3.3.1.1.7
Configured data rate of fibre channel port.
OBJECT-TYPE    
  INTEGER auto(-1), gb2(2), gb4(4), gb8(8)  

fcPortConnModeConfigured 1.3.6.1.4.1.4547.2.3.3.1.1.8
Configured mode of the fibre channel port.
OBJECT-TYPE    
  INTEGER loop(1), ptp(2), looppreferred(3), ptppreferred(4)  

fcPortDataRateCapability 1.3.6.1.4.1.4547.2.3.3.1.1.9
Maximum data rate capability of the fibre channel port.
OBJECT-TYPE    
  INTEGER gb2(2), gb4(4), gb8(8)  

fcPortNodeName 1.3.6.1.4.1.4547.2.3.3.1.1.10
Fibre channel node name.
OBJECT-TYPE    
  DisplayWWN  

fcPortPortName 1.3.6.1.4.1.4547.2.3.3.1.1.11
Fibre channel port name.
OBJECT-TYPE    
  DisplayWWN  

fcPortPeerName 1.3.6.1.4.1.4547.2.3.3.1.1.12
The port name of the fabric-attached fibre channel peer. Only valid for a switched fabric. Direct-connected fibre channel ports will respond with all zeros.
OBJECT-TYPE    
  DisplayWWN  

fcPortStatisticsEntry 1.3.6.1.4.1.4547.2.3.3.2.1
Stores statistics about fibre channel ports.
OBJECT-TYPE    
  FcPortStatisticsEntry  

fcStatsIndex 1.3.6.1.4.1.4547.2.3.3.2.1.1
Used to index the fibre channel port in the Fibre Channel Port Statistics table.
OBJECT-TYPE    
  Integer32 1..2  

fcStatsTxWords 1.3.6.1.4.1.4547.2.3.3.2.1.2
Number of words transmitted on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsRxWords 1.3.6.1.4.1.4547.2.3.3.2.1.3
Number of words received on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsTimeSinceReset 1.3.6.1.4.1.4547.2.3.3.2.1.4
Amount of time since the fibre channel port statistics were reset.
OBJECT-TYPE    
  TimeInterval  

fcStatsErrLinkFailure 1.3.6.1.4.1.4547.2.3.3.2.1.5
Number of link failure events on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsErrLossOfSync 1.3.6.1.4.1.4547.2.3.3.2.1.6
Number of loss of sync events on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsErrInvalidCRC 1.3.6.1.4.1.4547.2.3.3.2.1.7
Number of frames with invalid CRCs on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsErrInvalidTxWords 1.3.6.1.4.1.4547.2.3.3.2.1.8
Number of invalid TX word events on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsErrLipCount 1.3.6.1.4.1.4547.2.3.3.2.1.9
Number of LIP events on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsErrNOSCount 1.3.6.1.4.1.4547.2.3.3.2.1.10
Number of NOS events on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsErrSignalLoss 1.3.6.1.4.1.4547.2.3.3.2.1.11
Number of loss of signal events on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

fcStatsErrPrimitive 1.3.6.1.4.1.4547.2.3.3.2.1.12
Number of primitive sequential protocol errors on this fibre channel port.
OBJECT-TYPE    
  Unsigned32  

sasPortInfoEntry 1.3.6.1.4.1.4547.2.3.3.3.1
Stores information about the SAS ports.
OBJECT-TYPE    
  SASPortInfoEntry  

sasPortIndex 1.3.6.1.4.1.4547.2.3.3.3.1.1
Used to index the SAS port in the SAS Port Entry table.
OBJECT-TYPE    
  Integer32 1..2  

sasPortPortNumber 1.3.6.1.4.1.4547.2.3.3.3.1.2
The SAS port number.
OBJECT-TYPE    
  Integer32 1..2  

sasPortOperationalState 1.3.6.1.4.1.4547.2.3.3.3.1.3
Operational state of this entire SAS port. Degraded state is entered when fewer than all four PHYs are online. Offline state is entered when all four PHYs are offline.
OBJECT-TYPE    
  INTEGER unknown(-1), online(1), offline(2), degraded(3)  

sasPortPhy1State 1.3.6.1.4.1.4547.2.3.3.3.1.4
Operational state of SAS PHY 1 of this SAS port.
OBJECT-TYPE    
  PHYStatus  

sasPortPhy2State 1.3.6.1.4.1.4547.2.3.3.3.1.5
Operational state of SAS PHY 2 of this SAS port.
OBJECT-TYPE    
  PHYStatus  

sasPortPhy3State 1.3.6.1.4.1.4547.2.3.3.3.1.6
Operational state of SAS PHY 3 of this SAS port.
OBJECT-TYPE    
  PHYStatus  

sasPortPhy4State 1.3.6.1.4.1.4547.2.3.3.3.1.7
Operational state of SAS PHY 4 of this SAS port.
OBJECT-TYPE    
  PHYStatus  

sasPortAdminState 1.3.6.1.4.1.4547.2.3.3.3.1.8
Administrative state of this SAS port. Indicates whether the port is enabled or disabled.
OBJECT-TYPE    
  INTEGER unknown(-1), disabled(1), enabled(2)  

sasPortDataRateCapability 1.3.6.1.4.1.4547.2.3.3.3.1.9
Maximum data rate capability of the SAS port.
OBJECT-TYPE    
  INTEGER gb1point5(1), gb3(3), gb6(6)  

sasPortDataRateNegotiated 1.3.6.1.4.1.4547.2.3.3.3.1.10
Current negotiated data rate of this SAS port.
OBJECT-TYPE    
  INTEGER gb1point5(1), gb3(3), gb6(6)  

sasPortAddress 1.3.6.1.4.1.4547.2.3.3.3.1.11
SAS Port Address.
OBJECT-TYPE    
  DisplayWWN  

sasPhyStatisticsEntry 1.3.6.1.4.1.4547.2.3.3.4.1
Stores statistics about SAS Phys.
OBJECT-TYPE    
  SasPHYStatisticsEntry  

sasPhyStatsIndex 1.3.6.1.4.1.4547.2.3.3.4.1.1
Used to index the SAS PHY in the SAS PHY Statistics table.
OBJECT-TYPE    
  Integer32 1..8  

sasPhyStatsTimeSinceReset 1.3.6.1.4.1.4547.2.3.3.4.1.2
Amount of time since the SAS PHY statistics were reset on this SAS PHY.
OBJECT-TYPE    
  TimeInterval  

sasPhyStatsErrLinkChanged 1.3.6.1.4.1.4547.2.3.3.4.1.3
Number of link changed events on this SAS PHY.
OBJECT-TYPE    
  Unsigned32  

sasPhyStatsErrInvalidCRC 1.3.6.1.4.1.4547.2.3.3.4.1.4
Number of Invalid CRC events on this SAS PHY.
OBJECT-TYPE    
  Unsigned32  

sasPhyStatsErrPhyReset 1.3.6.1.4.1.4547.2.3.3.4.1.5
Number of Phy Reset events on this SAS PHY.
OBJECT-TYPE    
  Unsigned32  

sasPhyStatsErrLossOfSync 1.3.6.1.4.1.4547.2.3.3.4.1.6
Number of loss of sync events on this SAS PHY.
OBJECT-TYPE    
  Unsigned32  

sasPhyStatsErrDisparityCount 1.3.6.1.4.1.4547.2.3.3.4.1.7
Number of disparity error events on this SAS PHY.
OBJECT-TYPE    
  Unsigned32  

sasPhyStatsErrInvalidDwords 1.3.6.1.4.1.4547.2.3.3.4.1.8
Number of invalid DWORD events on this SAS PHY.
OBJECT-TYPE    
  Unsigned32  

trapsEnabled 1.3.6.1.4.1.4547.2.3.4.1
Indicates whether traps are enabled or disabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

snmpUpdatesEnabled 1.3.6.1.4.1.4547.2.3.4.2
Indicates whether SNMP updates are enabled or disabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

trapMaxClients 1.3.6.1.4.1.4547.2.3.5.1
The maximum number of SNMP trap recipients supported by this HW element.
OBJECT-TYPE    
  Integer32  

trapClientTable 1.3.6.1.4.1.4547.2.3.5.2
Stores a row for each IP address/port number configured to receive traps.
OBJECT-TYPE    
  SEQUENCE OF  
    TrapClientEntry

trapClientEntry 1.3.6.1.4.1.4547.2.3.5.2.1
Ip/Port pair for a specific client.
OBJECT-TYPE    
  TrapClientEntry  

trapClientIndex 1.3.6.1.4.1.4547.2.3.5.2.1.1
Used to index a trap client in the trapClientTable.
OBJECT-TYPE    
  Integer32 0..8  

trapClientIpAddress 1.3.6.1.4.1.4547.2.3.5.2.1.2
The IP address of a client registered for traps in dotted notation.
OBJECT-TYPE    
  DisplayString Size(0..48)  

trapClientPort 1.3.6.1.4.1.4547.2.3.5.2.1.3
The UDP port to send traps for this trap client. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.
OBJECT-TYPE    
  Integer32 1..2147483647  

trapClientFilter 1.3.6.1.4.1.4547.2.3.5.2.1.4
This value defines the trap severity filter for this trap host. The unit will send traps to this trap client that have a severity level less than or equal to this value. The default value of this object is 'warning'.
OBJECT-TYPE    
  INTEGER none(1), critical(2), warning(3), informational(4), all(5)  

bridgeTemperatureWarning 1.3.6.1.4.1.4547.2.3.0.1
Supports notification of over/under temperature warnings. The following information is returned: tempStatus - the current temperature status (normal, warning, critical) Where normal indicates the temperature is within the safe range. Warning indicates the warning threshold has been reached. Critical indicates that the temperature is outside the safe range. temperature - current temperature of the sensor Recommended severity level (for filtering): warning
NOTIFICATION-TYPE    

fcPortTransition 1.3.6.1.4.1.4547.2.3.0.2
Supports notification of fibre channel port connectivity changes. The following information is returned: fcPortPortNumber - the description of the port fcPortOperationalState - the current port state Recommended severity level (for filtering): informational
NOTIFICATION-TYPE    

sasPortTransition 1.3.6.1.4.1.4547.2.3.0.3
Supports notification of SAS port connectivity changes. The following information is returned: sasPortPortNumber - the description of the port sasPortOperationalState - the current port state Recommended severity level (for filtering): informational
NOTIFICATION-TYPE    

bridgeThroughputWarning 1.3.6.1.4.1.4547.2.3.0.4
Supports notification of max-throughput warning indicating a potential data bottleneck. Data throughput is measured as aggregate completed I/O's per second on the Fibre Channel interfaces. The following information is returned: ChassisthroughputStatus - the current throughput status normal : no data bottleneck. warning: aggregate fibre channel throughput has exceeded 50,000 IOPS. Recommended severity level (for filtering): informational
NOTIFICATION-TYPE