ATMPrivate-Mib
File:
ATMPrivate-Mib.mib (11662 bytes)
Imported modules
Imported symbols
Defined Types
ChrComAtmIfEntry |
|
SEQUENCE |
|
|
|
|
chrComIfAtmMaxPM |
Integer32 |
0..65535 |
|
chrComIfAtmCurrentPM |
Integer32 |
0..65535 |
|
chrComIfAtmIfType |
AtmIfType |
|
|
atmInterfaceMaxVpiForVccs |
Integer32 |
|
|
atmTCloopback |
Integer32 |
|
|
chrComIfAtmAlarmVector |
Integer32 |
|
|
chrComIfAtmAlarmSeverityIndex |
Integer32 |
0..65535 |
ChrComAtmVplEntry |
|
SEQUENCE |
|
|
|
|
chrComAtmVplNimPt |
TruthValue |
|
|
chrComAtmVplPMAdminStatus |
AdminStatus |
|
|
chrComAtmVplVpiApsChannelId |
INTEGER |
0..4095 |
|
chrComAtmVplVciApsChannelId |
INTEGER |
0..65535 |
|
chrComAtmVplIfIndexVpPeerId |
Integer32 |
|
|
chrComAtmVpiPolicingMode |
Integer32 |
|
ChrComAtmVclEntry |
|
SEQUENCE |
|
|
|
|
chrComAtmVclNimPt |
TruthValue |
|
|
chrComAtmVclPMAdminStatus |
AdminStatus |
|
|
chrComAtmVclVpiApsChannelId |
INTEGER |
0..4095 |
|
chrComAtmVclVciApsChannelId |
INTEGER |
0..65535 |
|
chrComAtmVclIfIndexVcPeerId |
Integer32 |
|
|
chrComAtmVciPolicingMode |
Integer32 |
|
Defined Values
chrComIfAtmTable |
1.3.6.1.4.1.3695.1.2.2.1 |
The chromatis private ATM Interface Configuration Table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ChrComAtmIfEntry |
|
chrComIfAtmEntry |
1.3.6.1.4.1.3695.1.2.2.1.1 |
Additional columns for the ATM Interface table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ChrComAtmIfEntry |
|
|
chrComIfAtmMaxPM |
1.3.6.1.4.1.3695.1.2.2.1.1.1 |
describes the network operator that selects VPLs and VCLs for which he wants PM
data collection, by setting PM Admin Status field of the VPL/VCL to UP.
This collection request might be rejected if the AtmIfCurrentPM exceeds AtmIfMaxPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
chrComIfAtmCurrentPM |
1.3.6.1.4.1.3695.1.2.2.1.1.2 |
describes the network operator that selects VPLs and VCLs for which he wants PM
data collection, by setting PM Admin Status field of the VPL/VCL to UP.
This collection request might be rejected if the AtmIfCurrentPM exceeds AtmIfMaxPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
chrComIfAtmIfType |
1.3.6.1.4.1.3695.1.2.2.1.1.3 |
Specifies the type of ATM cell layer interface defined on the physical path
termination point modeled by this entry in the interface table.
For UNI and BICI interfaces segment end point is automatically configured all VPLs
and VCLs that reside on the interface.
Default values For tribs is UNI and For OCM is NNI. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AtmIfType |
|
|
atmInterfaceMaxVpiForVccs |
1.3.6.1.4.1.3695.1.2.2.1.1.4 |
The maximum VPI that a VCC (PVCC or SVCC) within the interface can get.
Greater values of VPI can be used only for VPCs. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
atmTCloopback |
1.3.6.1.4.1.3695.1.2.2.1.1.5 |
Loopback on the Utopia Interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
chrComIfAtmAlarmVector |
1.3.6.1.4.1.3695.1.2.2.1.1.6 |
describes the alarms related to the ATM Interface - represented by a Bit field. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
chrComIfAtmAlarmSeverityIndex |
1.3.6.1.4.1.3695.1.2.2.1.1.7 |
An Index into into the alarm severity profile table, specifying the
severity assignment for Atm Interface reported alarms. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
chrComAtmVplTable |
1.3.6.1.4.1.3695.1.9.1.1 |
The Chromatis Private VPL Termination Point Configuration
table extensions. This table augments the VPL
configuration table in RFC 2515. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ChrComAtmVplEntry |
|
chrComAtmVplEntry |
1.3.6.1.4.1.3695.1.9.1.1.1 |
Additional columns for the VPL configuration table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ChrComAtmVplEntry |
|
|
chrComAtmVplNimPt |
1.3.6.1.4.1.3695.1.9.1.1.1.1 |
Specifies whether the VPL termination point is monitored non-intrusively. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
chrComAtmVplPMAdminStatus |
1.3.6.1.4.1.3695.1.9.1.1.1.2 |
Indication whether collection of Performance Monitoring (PM) data is enabled
at this the VCL TP. The total number of VPLs and VCLs for which PM is
collected is limited, therefore the SET(up) SNMP request might be rejected
when the upper limit exceeds. AtmIfMaxPM and AtmIfCurrentPM fields of the ATM
interface table reflect that limitation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AdminStatus |
|
|
chrComAtmVplVpiApsChannelId |
1.3.6.1.4.1.3695.1.9.1.1.1.3 |
Specifies the Vcl Vpi which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4095 |
|
chrComAtmVplVciApsChannelId |
1.3.6.1.4.1.3695.1.9.1.1.1.4 |
Specifies the Vcl Vci which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
chrComAtmVplIfIndexVpPeerId |
1.3.6.1.4.1.3695.1.9.1.1.1.5 |
Specifies the Vpl IfIndex which is relevant only on sink node,
i.e. on the boundary of the protection domain.
In specified the ID of a Virtual VPL that represents the whole protection
peer. This V.VPL is the one that is cross connected.
NullPeerID signifies unprotected VPL.
Default - NullVPPeerID (that specifies unprotected sink or an intermediate
node)NullPeerID is MAXINT (IfIndex, AtmVplVpi), i.e. all bits are 1. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chrComAtmVpiPolicingMode |
1.3.6.1.4.1.3695.1.9.1.1.1.6 |
The Policing mode to be applied on the ingress VCL.
The policing is applied according to the parameters defined in the
RX traffic descriptor indexed by AtmVcSlReceiveTrafficDescrIndex |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chrComAtmVclTable |
1.3.6.1.4.1.3695.1.9.2.1 |
The Chromatis Private VCL Termination Point Configuration
table extensions. This table augments the VCL
configuration table in RFC 2515. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ChrComAtmVclEntry |
|
chrComAtmVclEntry |
1.3.6.1.4.1.3695.1.9.2.1.1 |
Additional columns for the VCL configuration table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ChrComAtmVclEntry |
|
|
chrComAtmVclNimPt |
1.3.6.1.4.1.3695.1.9.2.1.1.1 |
Specifies whether the VPL termination point is monitored non-intrusively. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
chrComAtmVclPMAdminStatus |
1.3.6.1.4.1.3695.1.9.2.1.1.2 |
Indication whether collection of Performance Monitoring (PM) data is enabled
at this the VCL TP. The total number of VPLs and VCLs for which PM is
collected is limited, therefore the SET(up) SNMP request might be rejected
when the upper limit exceeds. AtmIfMaxPM and AtmIfCurrentPM fields of the ATM
interface table reflect that limitation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AdminStatus |
|
|
chrComAtmVclVpiApsChannelId |
1.3.6.1.4.1.3695.1.9.2.1.1.3 |
Specifies the Vcl Vpi which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4095 |
|
chrComAtmVclVciApsChannelId |
1.3.6.1.4.1.3695.1.9.2.1.1.4 |
Specifies the Vcl Vci which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
chrComAtmVclIfIndexVcPeerId |
1.3.6.1.4.1.3695.1.9.2.1.1.5 |
Specifies the Vcl IfIndex which is the Virtual VCL that represents the whole
protectio peer.
This V.VCL is the one that is cross-connected.
NULL value signifies that the VCL is not protected.
Default - NullVPPeerID (that specifies unprotected sink or an intermediate
node)NullPeerID is MAXINT (IfIndex, AtmVplVpi), i.e. all bits are 1 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chrComAtmVciPolicingMode |
1.3.6.1.4.1.3695.1.9.2.1.1.6 |
The Policing mode to be applied on the ingress VCL.
The policing is applied according to the parameters defined in the
RX traffic descriptor indexed by AtmVcSlReceiveTrafficDescrIndex |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|