ATI-MIB
File:
ATI-MIB.mib (83747 bytes)
Imported modules
Imported symbols
Defined Types
| RptrNmMgrEntry |
|
| SEQUENCE |
|
|
|
| |
rptrNmMgrIndex |
INTEGER |
|
| |
rptrNmMgrIpAddr |
IpAddress |
|
| DeviceEntry |
|
| SEQUENCE |
|
|
|
| |
deviceIndex |
INTEGER |
|
| |
deviceQuadrant |
INTEGER |
|
| |
deviceDescr |
DisplayString |
|
| |
deviceObjectID |
OBJECT IDENTIFIER |
|
| |
deviceIpAddr |
IpAddress |
|
| |
devicePortCapacity |
INTEGER |
|
| GroupInfoEntry |
|
| SEQUENCE |
|
|
|
| |
groupInfoIndex |
INTEGER |
|
| |
groupLEDInfo |
OCTET STRING |
|
| |
groupSegmentation |
INTEGER |
|
| |
groupSecurity |
INTEGER |
|
| |
groupIntruderProtection |
INTEGER |
|
| |
groupSrcAddrLearningMode |
INTEGER |
|
| |
groupIntruderTrap |
INTEGER |
|
| |
groupIntruderDisable |
INTEGER |
|
| |
groupOperStatus |
INTEGER |
|
| |
groupDescr |
DisplayString |
|
| |
groupObjectID |
OBJECT IDENTIFIER |
|
| |
groupIPAddress |
IpAddress |
|
| |
groupPortCapacity |
INTEGER |
|
| |
groupEraseSourceAddressTable |
INTEGER |
|
| |
groupAddSourceAddress |
OCTET STRING |
|
| |
groupDeleteSourceAddress |
OCTET STRING |
|
| |
groupLimitAddressPerPort |
INTEGER |
|
| |
groupCheckPrimaryTimer |
INTEGER |
|
| |
groupReceiveFailureTimer |
INTEGER |
|
| |
groupCheckResampleTimer |
INTEGER |
|
| GroupStatEntry |
|
| SEQUENCE |
|
|
|
| |
groupStatIndex |
INTEGER |
|
| |
groupFCSError |
Counter |
|
| |
groupAlignError |
Counter |
|
| |
groupFrameTooLong |
Counter |
|
| |
groupShortEvent |
Counter |
|
| |
groupRunt |
Counter |
|
| |
groupPortCollision |
Counter |
|
| |
groupLateEvent |
Counter |
|
| |
groupVeryLongEvent |
Counter |
|
| |
groupDataRateMism |
Counter |
|
| |
groupAutoPartition |
Counter |
|
| |
groupFrames-64-127bytes |
Counter |
|
| |
groupFrames-128-255bytes |
Counter |
|
| |
groupFrames-256-511bytes |
Counter |
|
| |
groupFrames-512-1023bytes |
Counter |
|
| |
groupFrames-1024-1518bytes |
Counter |
|
| GroupSATEntry |
|
| SEQUENCE |
|
|
|
| |
groupSATModule |
INTEGER |
|
| |
groupSATIndex |
INTEGER |
|
| |
groupSATMacAddress |
OCTET STRING |
|
| |
groupSATPort |
INTEGER |
|
| AtiPortEntry |
|
| SEQUENCE |
|
|
|
| |
atiPortGroupIndex |
INTEGER |
|
| |
atiPortIndex |
INTEGER |
|
| |
portName |
DisplayString |
|
| |
portState |
INTEGER |
|
| |
linkTest |
INTEGER |
|
| |
altReconnection |
INTEGER |
|
| |
polarityCorrection |
INTEGER |
|
| |
partitionedLED |
INTEGER |
|
| |
linkTestLED |
INTEGER |
|
| |
polarityLED |
INTEGER |
|
| |
portMACAddress |
MacAddress |
|
| |
portFrames-64-127bytes |
Counter |
|
| |
portFrames-128-255bytes |
Counter |
|
| |
portFrames-256-511bytes |
Counter |
|
| |
portFrames-512-1023bytes |
Counter |
|
| |
portFrames-1024-1518bytes |
Counter |
|
| |
portRedundantPort |
INTEGER |
|
| |
portRedundantPosition |
INTEGER |
|
| |
portLearningState |
INTEGER |
|
| FtConfig |
|
| SEQUENCE |
|
|
|
| |
ftMaxAge |
INTEGER |
|
| |
ftMaxRemove |
INTEGER |
|
| |
ftMaxFilter |
INTEGER |
|
| |
ftAgeTime |
INTEGER |
|
| |
ftMaxPerm |
INTEGER |
|
| |
ftForwMBcast |
INTEGER |
|
| |
ftSecureMode |
INTEGER |
|
| FdbConfig |
|
| SEQUENCE |
|
|
|
| |
ftMaxFilter |
INTEGER |
|
| |
ftMaxPerm |
INTEGER |
|
| |
ftForwMBcast |
INTEGER |
|
| |
ftSecureMode |
INTEGER |
|
| FtEntry |
|
| SEQUENCE |
|
|
|
| |
ftAddr |
OCTET STRING |
|
| |
ftAge |
INTEGER |
|
| |
ftDisp |
INTEGER |
|
| StBridge |
|
| SEQUENCE |
|
|
|
| |
stBrName |
DisplayString |
|
| |
stBrIdent |
OCTET STRING |
|
| |
stBrMaxAge |
INTEGER |
|
| |
stBrHelloTime |
INTEGER |
|
| |
stBrForwDelay |
INTEGER |
|
| |
stBrIsRoot |
INTEGER |
|
| |
stBrIsDesig |
INTEGER |
|
| |
stBrSpanAddr |
OCTET STRING |
|
| |
stBrPriority |
INTEGER |
|
| |
stBrSTPDisabled |
INTEGER |
|
| StRoot |
|
| SEQUENCE |
|
|
|
| |
stRtIdent |
OCTET STRING |
|
| |
stRtCost |
INTEGER |
|
| |
stRtPort |
INTEGER |
|
| |
stRtMaxAge |
INTEGER |
|
| |
stRtHelloTime |
INTEGER |
|
| |
stRtForwDelay |
INTEGER |
|
| StPort |
|
| SEQUENCE |
|
|
|
| |
stPrtPort |
INTEGER |
|
| |
stPrtState |
INTEGER |
|
| |
stPrtCost |
INTEGER |
|
| |
stPrtIsDesig |
INTEGER |
|
| |
stPrtIsRoot |
INTEGER |
|
| |
stPrtDesigRoot |
OCTET STRING |
|
| |
stPrtDesigCost |
INTEGER |
|
| |
stPrtDesigBridge |
OCTET STRING |
|
| |
stPrtDesigPort |
INTEGER |
|
| |
stPrtPriority |
INTEGER |
|
| FilterRangeEntry |
|
| SEQUENCE |
|
|
|
| |
frIndex |
INTEGER |
|
| |
frEntry |
OCTET STRING |
|
Defined Values
| products |
1.3.6.1.4.1.207.1 |
| OBJECT IDENTIFIER |
|
|
|
| bridge |
1.3.6.1.4.1.207.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| repeater |
1.3.6.1.4.1.207.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| atiBridge |
1.3.6.1.4.1.207.1.1.1.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| mibObject |
1.3.6.1.4.1.207.8 |
| OBJECT IDENTIFIER |
|
|
|
| hub3600 |
1.3.6.1.4.1.207.1.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| hub3100 |
1.3.6.1.4.1.207.1.2.10 |
| OBJECT IDENTIFIER |
|
|
|
| hubMib |
1.3.6.1.4.1.207.8.1 |
| OBJECT IDENTIFIER |
|
|
|
| rptrInfo |
1.3.6.1.4.1.207.8.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| groupInfo |
1.3.6.1.4.1.207.8.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| portInfo |
1.3.6.1.4.1.207.8.1.3 |
| OBJECT IDENTIFIER |
|
|
|
| rptrStat |
1.3.6.1.4.1.207.8.1.4 |
| OBJECT IDENTIFIER |
|
|
|
| groupStat |
1.3.6.1.4.1.207.8.1.5 |
| OBJECT IDENTIFIER |
|
|
|
| groupSAT |
1.3.6.1.4.1.207.8.1.6 |
| OBJECT IDENTIFIER |
|
|
|
| actualIPAddr |
1.3.6.1.4.1.207.8.1.1.1 |
| The actual IP Address that is currently being used by the
hub. This could be the same value as hubIPAddr, or it may
be different if another IP Address was received via Bootp. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| hubIPAddr |
1.3.6.1.4.1.207.8.1.1.2 |
| The configured IP Address of the hub. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| subnetMask |
1.3.6.1.4.1.207.8.1.1.3 |
| Subnet mask of the hub. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| routerAddr |
1.3.6.1.4.1.207.8.1.1.4 |
| Gateway/router address of the hub. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| snmpManager |
1.3.6.1.4.1.207.8.1.1.5 |
| IP Address of the hub's SNMP manager to which Traps
will be sent. |
| Status: deprecated |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| softwareProduct |
1.3.6.1.4.1.207.8.1.1.6 |
| The ATI software product model number running in the hub. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| softwareLevel |
1.3.6.1.4.1.207.8.1.1.7 |
| The software release level running in the hub. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| configurationChanged |
1.3.6.1.4.1.207.8.1.1.8 |
| A flag, set to the value changed(1) when any of the
hub's status or configuration has been changed.
When this object is read, then the value is reset
to nochange(2). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
changed(1), nochange(2) |
|
| rptrNmMgrTable |
1.3.6.1.4.1.207.8.1.1.9 |
|
A list of SNMP Trap Manager stations Entries.
The number of entries is given by the
rptrNmMgrTotal mib object.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
RptrNmMgrEntry |
|
| rptrNmMgrEntry |
1.3.6.1.4.1.207.8.1.1.9.1 |
|
An Trap receipt Manager Entry containing ipaddress of
the configured NMS's to which Traps are sent.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
RptrNmMgrEntry |
|
|
| rptrNmMgrIndex |
1.3.6.1.4.1.207.8.1.1.9.1.1 |
|
The Index of SNMP Managers IP Address.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..4 |
|
| rptrNmMgrIpAddr |
1.3.6.1.4.1.207.8.1.1.9.1.2 |
|
The IP Address of the NMS host configured.
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| deviceTable |
1.3.6.1.4.1.207.8.1.1.10 |
| The table contains the mapping of all devices
in the chassis. For all hubs and switches, the
object 'deviceQuadrant' returns 'right' (1).
For docking devices, then it will reflect the
position of the device in the docking station.
This object is specific to Turbo Stack.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DeviceEntry |
|
| deviceEntry |
1.3.6.1.4.1.207.8.1.1.10.1 |
| The device entry in the DeviceTable.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DeviceEntry |
|
|
| deviceIndex |
1.3.6.1.4.1.207.8.1.1.10.1.1 |
|
The Slot number in the chassis where the device is
installed.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..8 |
|
| deviceQuadrant |
1.3.6.1.4.1.207.8.1.1.10.1.2 |
| The Quadrant of the device.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
right(1), left(2) |
|
| deviceDescr |
1.3.6.1.4.1.207.8.1.1.10.1.3 |
| TurboStack product family only.
A textual description of the device.
For devices that are repeaters, this value is identical to
the rptrGroupDescr object.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| deviceObjectID |
1.3.6.1.4.1.207.8.1.1.10.1.4 |
| TurboStack product family only.
The sysObject identification of the device.
For devices that are repeaters, this value is identical to
the rptrGroupObjectID object.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OBJECT IDENTIFIER |
|
|
| deviceIpAddr |
1.3.6.1.4.1.207.8.1.1.10.1.5 |
| TurboStack product family only.
The IP address (if present) of the device.
For hubs devices, this object will return the same
value as hubIPAddr.
|
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| devicePortCapacity |
1.3.6.1.4.1.207.8.1.1.10.1.6 |
| TurboStack product family only.
The number of ports contained within the device.
Valid range is 1-1024. Within each device, the
ports are uniquely numbered in the range from
1 to devicePortCapacity.
For devices that are repeaters, this value is identical to
the rptrGroupPortCapacity object. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| localOmegaState |
1.3.6.1.4.1.207.8.1.1.11 |
|
This object enables the Local Omega to be enabled or disabled.
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| remoteOmegaState |
1.3.6.1.4.1.207.8.1.1.12 |
|
This object enables the Remote Omega to be enabled or disabled.
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| hubReadableFrames |
1.3.6.1.4.1.207.8.1.4.1 |
| The sum total of the Readable Frames Counters
of all ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubReadableOctets |
1.3.6.1.4.1.207.8.1.4.2 |
| The sum total of the Readable Octets (bytes) Counters
of all ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubFCSError |
1.3.6.1.4.1.207.8.1.4.3 |
| The sum total of the FCS (CRC) Error Counters of all
ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubAlignError |
1.3.6.1.4.1.207.8.1.4.4 |
| The sum total of the Alignment Error Counters of all
ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubShortEvent |
1.3.6.1.4.1.207.8.1.4.6 |
| The sum total of the Short Event Error Counters of all
ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubRunt |
1.3.6.1.4.1.207.8.1.4.7 |
| The sum total of the Runt Error Counters of all
ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubLateEvent |
1.3.6.1.4.1.207.8.1.4.8 |
| The sum total of the Late Event Error Counters of all
ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubVeryLongEvent |
1.3.6.1.4.1.207.8.1.4.9 |
| The sum total of the Very Long Event Error (Jabber)
Counters of all ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubDataRateMism |
1.3.6.1.4.1.207.8.1.4.10 |
| The sum total of the Data Rate Mismatch Error Counters
of all ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubAutoPartition |
1.3.6.1.4.1.207.8.1.4.11 |
| The sum total of the Auto Port Partition Counters
of all ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubTotalError |
1.3.6.1.4.1.207.8.1.4.12 |
| The sum total of all Error Counters
of all ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubPortCollision |
1.3.6.1.4.1.207.8.1.4.13 |
| The sum total of the Port Collision Counters
of all ports on all modules/groups |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubFrames-64-127bytes |
1.3.6.1.4.1.207.8.1.4.14 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on all modules/groups, where
the frame length was in the range 64 through 127 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubFrames-128-255bytes |
1.3.6.1.4.1.207.8.1.4.15 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on all modules/groups, where
the frame length was in the range 128 through 255 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubFrames-256-511bytes |
1.3.6.1.4.1.207.8.1.4.16 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on all modules/groups, where
the frame length was in the range 256 through 511 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubFrames-512-1023bytes |
1.3.6.1.4.1.207.8.1.4.17 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on all modules/groups, where
the frame length was in the range 512 through 1023 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| hubFrames-1024-1518bytes |
1.3.6.1.4.1.207.8.1.4.18 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on all modules/groups, where
the frame length was in the range 1024 through 1518 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ledInfo |
1.3.6.1.4.1.207.8.1.2.1 |
| See groupLEDInfo |
| Status: deprecated |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| groupInfoTable |
1.3.6.1.4.1.207.8.1.2.2 |
| Table of group specific information. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
GroupInfoEntry |
|
| groupInfoEntry |
1.3.6.1.4.1.207.8.1.2.2.1 |
| An entry in the table, containing information
about a single group of ports. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
GroupInfoEntry |
|
|
| groupInfoIndex |
1.3.6.1.4.1.207.8.1.2.2.1.1 |
| This object identifies the group within the
repeater for which this entry contains information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| groupLEDInfo |
1.3.6.1.4.1.207.8.1.2.2.1.2 |
| This information encodes the current state of the module
per-port LEDs. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| groupSegmentation |
1.3.6.1.4.1.207.8.1.2.2.1.3 |
| AT-3100 product family only.
This object controls the segmentation option for this group.
It may be segmented, connected, or using the module's
external segmentation switch. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
segmented(1), connected(2), external(3) |
|
| groupSecurity |
1.3.6.1.4.1.207.8.1.2.2.1.4 |
| AT-3100 product family only.
This object controls the Security option for this group.
It may be enabled, disabled, or using module's external
security switch. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2), external(3) |
|
| groupIntruderProtection |
1.3.6.1.4.1.207.8.1.2.2.1.5 |
| AT-3100 and TurboStack product families only.
This object controls the Intruder Protection option for this
group/module. For TurboStack products, disabled turns off
Intruder Protection and places the module into source address
Learning Mode. Enabled turns on Intruder Protection and places
the module into Secure Mode. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| groupSrcAddrLearningMode |
1.3.6.1.4.1.207.8.1.2.2.1.6 |
| AT-3100 product family only.
This object indicates the Source Address Learning Mode.
Mode1 : Automatic; passive devices: Automatic MAC address
learning. Re-learn port MAC address after a port is
disabled/re-enabled. Passive devices connected to a
port will see all backbone traffic.
Mode2 : Automatic; passive devices: Automatic MAC address
learning. Re-learn port MAC address after link test
fails (cable removed). Passive devices connected to a
port will see all backbone traffic.
Mode3 : Manual: No automatic MAC address learning (disabled).
Mode4 : Automatic; active devices: Automatic MAC address
learning. Re-learn port MAC address after a port is
disabled/re-enabled. Passive devices connected to a
port will see no backbone traffic. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
mode1(1), mode2(2), mode3(3), mode4(4) |
|
| groupIntruderTrap |
1.3.6.1.4.1.207.8.1.2.2.1.7 |
| AT-3100 and TurboStack product families only.
This object controls the action to be taken by this group/module
when an Intruder Alert event occurs. When this option is
enabled, the detection of an intruder (a received packet with
an unlearned or undefined source address) causes a Trap to be
sent to the configured host manager. When this option is
disabled then no Trap is sent on an Intruder Alert event. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| groupIntruderDisable |
1.3.6.1.4.1.207.8.1.2.2.1.8 |
| AT-3100 and TurboStack product families only.
This object controls the action to be taken by this group/module
when an Intruder Alert event occurs. When this option is
enabled, the detection of an intruder (a received packet with
an unlearned or undefined source address) causes the port where
the intruder was detected to be automatically disabled. When
this option is disabled then the port will not be disabled on
an Intruder Alert event. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| groupOperStatus |
1.3.6.1.4.1.207.8.1.2.2.1.9 |
| TurboStack product family only.
An object that indicates the operational status of the module.
For modules that are repeaters, this value is identical to
the rptrGroupOperStatus object.
A status of operational(2) indicates that the
module is present and functional within the chassis.
A status of malfunctioning(3) indicates that the
module is present within the chassis but is not functional.
A status of notPresent(4) indicates that the module is
temporarily or permanently physically and/or logically
not a part of the chassis. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
operational(2), malfunctioning(3), notPresent(4) |
|
| groupDescr |
1.3.6.1.4.1.207.8.1.2.2.1.10 |
| TurboStack product family only.
A textual description of the module.
For modules that are repeaters, this value is identical to
the rptrGroupDescr object. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| groupObjectID |
1.3.6.1.4.1.207.8.1.2.2.1.11 |
| TurboStack product family only.
The sysObject identification of the module.
For modules that are repeaters, this value is identical to
the rptrGroupObjectID object. |
| Status: deprecated |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OBJECT IDENTIFIER |
|
|
| groupIPAddress |
1.3.6.1.4.1.207.8.1.2.2.1.12 |
| TurboStack product family only.
The IP address (if any) of the module.
For modules that are repeaters, this value is identical to
the actualIPAddr object. For non-repeater modules, this
object identifies the IP address that may be used to
communicate directly with the module. |
| Status: deprecated |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| groupPortCapacity |
1.3.6.1.4.1.207.8.1.2.2.1.13 |
| TurboStack product family only.
The number of ports contained within the module. Valid range
range is 1-1024. Within each module, the ports are uniquely
numbered in the range from 1 to groupPortCapacity.
For modules that are repeaters, this value is identical to
the rptrGroupPortCapacity object. |
| Status: deprecated |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| groupEraseSourceAddressTable |
1.3.6.1.4.1.207.8.1.2.2.1.14 |
| TurboStack product family only.
This object, when Set to the erase value, will clear (empty)
the module Source Address Table, deleting all learned MAC
addresses; this object will then automatically revert back to
the noerase state. When Set to noerase, no action is taken and
the Source Address Table remains unmodified. A Get of this
object will always return the noerase value. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noerase(1), erase(2) |
|
| groupAddSourceAddress |
1.3.6.1.4.1.207.8.1.2.2.1.15 |
| TurboStack product family only.
This object, when Set with a 48-bit MAC address value, will
add the new MAC address to the module Source Address Table.
A Get of this object will return a string of length zero. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| groupDeleteSourceAddress |
1.3.6.1.4.1.207.8.1.2.2.1.16 |
| TurboStack product family only.
This object, when Set with a 48-bit MAC address value, will
delete the MAC address from the module Source Address Table.
A Get of this object will return a string of length zero. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| groupLimitAddressPerPort |
1.3.6.1.4.1.207.8.1.2.2.1.17 |
| TurboStack product family only.
This object configures the module to allow no limitation
on number of source addresses on its ports, or limit to
only 1 source address per port. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noLimit(1), limit1Address(2) |
|
| groupCheckPrimaryTimer |
1.3.6.1.4.1.207.8.1.2.2.1.18 |
|
TurboStack product family only.
The Check Primary Timer is the timer value in seconds
which determines how long to wait before checking if
the primary port could receive again. This timer applies
when the secondary port is enabled, and the primary port's
failure is NOT due to loss of link.
Range: 1 - 65535 in seconds, 0 means don't check receives.
Default is 60 seconds.
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| groupReceiveFailureTimer |
1.3.6.1.4.1.207.8.1.2.2.1.19 |
|
TurboStack product family only.
The Receive Failure Timer is the timer value in seconds
which determines how long to wait before the secondary port
takes over when the primary port is not receiving data.
This timer applies only when the primary port's failure
is NOT due to loss of link.
Range: 0 - 65535 in seconds, 0 means don't check receives.
Default is 60 seconds.
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..65535 |
|
| groupCheckResampleTimer |
1.3.6.1.4.1.207.8.1.2.2.1.20 |
|
TurboStack product family only.
The Resample Timer is the timer value in milliseconds
which determines how long to sample/test if the primary
port could receive data or is no longer partitioned.
This timer begins once groupCheckPrimaryTimer has expired,
and during this sampling time, the secondary port cannot
repeat data.
Range: 100 - 65535 milliseconds. Default is 200 milliseconds.
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
100..65535 |
|
| groupStatTable |
1.3.6.1.4.1.207.8.1.5.1 |
| Table of performance and error statistics for the groups. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
GroupStatEntry |
|
| groupStatEntry |
1.3.6.1.4.1.207.8.1.5.1.1 |
| An entry in the table, containing total
performance and error statistics for a single
group. Regular retrieval of the information in
this table provides a means of tracking the
performance and health of the networked devices
attached to this group's ports.
The counters in this table are redundant in the
sense that they are the summations of information
already available through other objects. However,
these sums provide a considerable optimization of
network management traffic over the otherwise
necessary retrieval of the individual counters
included in each sum. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
GroupStatEntry |
|
|
| groupStatIndex |
1.3.6.1.4.1.207.8.1.5.1.1.1 |
| This object identifies the group within the
repeater for which this entry contains information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| groupFCSError |
1.3.6.1.4.1.207.8.1.5.1.1.2 |
| The sum total of the FCS (CRC) Error Counters of all
ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupAlignError |
1.3.6.1.4.1.207.8.1.5.1.1.3 |
| The sum total of the Alignment Error Counters of all
ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupShortEvent |
1.3.6.1.4.1.207.8.1.5.1.1.5 |
| The sum total of the Short Event Error Counters of all
ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupRunt |
1.3.6.1.4.1.207.8.1.5.1.1.6 |
| The sum total of the Runt Error Counters of all
ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupPortCollision |
1.3.6.1.4.1.207.8.1.5.1.1.7 |
| The sum total of the Port Collision Counters
of all ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupLateEvent |
1.3.6.1.4.1.207.8.1.5.1.1.8 |
| The sum total of the Late Event Error Counters of all
ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupVeryLongEvent |
1.3.6.1.4.1.207.8.1.5.1.1.9 |
| The sum total of the Very Long Event Error (Jabber)
Counters of all ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupDataRateMism |
1.3.6.1.4.1.207.8.1.5.1.1.10 |
| The sum total of the Data Rate Mismatch Error Counters
of all ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupAutoPartition |
1.3.6.1.4.1.207.8.1.5.1.1.11 |
| The sum total of the Auto Port Partition Counters
of all ports on this module/group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupFrames-64-127bytes |
1.3.6.1.4.1.207.8.1.5.1.1.12 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on this module/group, where
the frame length was in the range 64 through 127 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupFrames-128-255bytes |
1.3.6.1.4.1.207.8.1.5.1.1.13 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on this module/group, where
the frame length was in the range 128 through 255 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupFrames-256-511bytes |
1.3.6.1.4.1.207.8.1.5.1.1.14 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on this module/group, where
the frame length was in the range 256 through 511 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupFrames-512-1023bytes |
1.3.6.1.4.1.207.8.1.5.1.1.15 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on this module/group, where
the frame length was in the range 512 through 1023 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupFrames-1024-1518bytes |
1.3.6.1.4.1.207.8.1.5.1.1.16 |
| TurboStack product family only.
The sum total number of readable frames received
on all ports on this module/group, where
the frame length was in the range 1024 through 1518 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| groupSourceAddressTable |
1.3.6.1.4.1.207.8.1.6.1 |
| TurboStack product family only.
Table of learned and/or configured source MAC addresses which
defines the only valid and allowable source addresses for
this module (if Intruder Protection is enabled). |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
GroupSATEntry |
|
| groupSATEntry |
1.3.6.1.4.1.207.8.1.6.1.1 |
| TurboStack product family only.
An entry in the Source Address Table, containing information
about a single source MAC address. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
GroupSATEntry |
|
|
| groupSATModule |
1.3.6.1.4.1.207.8.1.6.1.1.1 |
| TurboStack product family only.
This object identifies the group within the
repeater for which this entry contains information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| groupSATIndex |
1.3.6.1.4.1.207.8.1.6.1.1.2 |
| TurboStack product family only.
This object identifies the index within the Source Address
Table for which this entry contains information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| groupSATMacAddress |
1.3.6.1.4.1.207.8.1.6.1.1.3 |
| TurboStack product family only.
This object is the learned or configured source MAC address.
If no MAC address has been learned for this table entry (if
this is beyond the logical end of the table) then a string
of zero length will be returned. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| groupSATPort |
1.3.6.1.4.1.207.8.1.6.1.1.4 |
| TurboStack product family only.
This object is the port number where the source MAC address
was last detected. If the MAC address has not been detected
since the system was last started, then this object will
be zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1024 |
|
| atiPortTable |
1.3.6.1.4.1.207.8.1.3.1 |
| Table of descriptive and status information about
the ports. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AtiPortEntry |
|
| atiPortEntry |
1.3.6.1.4.1.207.8.1.3.1.1 |
| An entry in the table, containing information
about a single port. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtiPortEntry |
|
|
| atiPortGroupIndex |
1.3.6.1.4.1.207.8.1.3.1.1.1 |
| This object identifies the group containing the
port for which this entry contains information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| atiPortIndex |
1.3.6.1.4.1.207.8.1.3.1.1.2 |
| This object identifies the port within the group
for which this entry contains information.
This value can never be greater than
rptrGroupPortCapacity for the associated group. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..1024 |
|
| portName |
1.3.6.1.4.1.207.8.1.3.1.1.3 |
| Port Name |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| portState |
1.3.6.1.4.1.207.8.1.3.1.1.4 |
| Port State option: enabled allow repeating of packets
through the port; disabled turns off the port and prevents
packets repeating through the port. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2), enabledByRedund(3), disabledByRedund(4) |
|
| linkTest |
1.3.6.1.4.1.207.8.1.3.1.1.5 |
| Link Test option: enabled turns on checking for link test
signals for the port; disabled turns off checking for
link test signals. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| altReconnection |
1.3.6.1.4.1.207.8.1.3.1.1.6 |
| Reconnection Method: 1=IEEE Standard, 2=Alternate. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
standardIEEE(1), alternate(2) |
|
| polarityCorrection |
1.3.6.1.4.1.207.8.1.3.1.1.7 |
| Polarity Correction option: enabled turns on automatic
polarity correction for the port; disabled turns off automatic
polarity correction. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| partitionedLED |
1.3.6.1.4.1.207.8.1.3.1.1.8 |
| This object reflects the current actual partitioning state of
the port. The notpartitioned value means that the port is
operational and repeating through the port is enabled.
The partitioned value means that the port is not operational
and repeating through the port is disabled. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notpartitioned(1), partitioned(2) |
|
| linkTestLED |
1.3.6.1.4.1.207.8.1.3.1.1.9 |
| This object reflects the current actual link test state of
the port. The nolinktesterror value means that valid
link integrity test signals have been detected on the port,
indicating that an operable device is cabled to the port.
The linktesterror value means that no link integrity test
signals have been detected, indicating removal or failure
of the port-to-device cable, or that the device is not
operational. This object applies only to UTP (twisted pair)
and fiber optic ports (not AUI or BNC ports). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
nolinktesterror(1), linktesterror(2) |
|
| polarityLED |
1.3.6.1.4.1.207.8.1.3.1.1.10 |
| This object reflects the current actual polarity state of
the port. The notreversed value means that the port-to-device
cable connection is properly polarized. The reversed value
means that the cable connection has reversed polarity.
This object applies only to UTP (twisted pair) and
fiber optic ports (not AUI or BNC ports). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notreversed(1), reversed(2) |
|
| portMACAddress |
1.3.6.1.4.1.207.8.1.3.1.1.11 |
| AT-3100 product family only.
This object is either the MAC address of the
last readable frame (i.e., counted by
rptrMonitorPortReadableFrames) received by this
port, or a manually input MAC address. If neither
of those exists, then a string of length zero is
returned. If a 'read' operation is performed on
this object, the value it returns is the same as
the value returned by object
'rptrAddrTrackNewLastSrcAddress' in the Standard
Repeater MIB (RFC1516). |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| portFrames-64-127bytes |
1.3.6.1.4.1.207.8.1.3.1.1.12 |
| TurboStack product family only.
The number of readable frames received on this port where
the frame length was in the range 64 through 127 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| portFrames-128-255bytes |
1.3.6.1.4.1.207.8.1.3.1.1.13 |
| TurboStack product family only.
The number of readable frames received on this port where
the frame length was in the range 128 through 255 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| portFrames-256-511bytes |
1.3.6.1.4.1.207.8.1.3.1.1.14 |
| TurboStack product family only.
The number of readable frames received on this port where
the frame length was in the range 256 through 511 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| portFrames-512-1023bytes |
1.3.6.1.4.1.207.8.1.3.1.1.15 |
| TurboStack product family only.
The number of readable frames received on this port where
the frame length was in the range 512 through 1023 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| portFrames-1024-1518bytes |
1.3.6.1.4.1.207.8.1.3.1.1.16 |
| TurboStack product family only.
The number of readable frames received on this port where
the frame length was in the range 1024 through 1518 octets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| portRedundantPort |
1.3.6.1.4.1.207.8.1.3.1.1.17 |
| TurboStack product family only.
This is the redundant port for atiPortIndex.
If the port is a secondary port as indicated in
portRedundantPosition, then it serves as a backup port.
This would indicate paired ports with redundant link. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| portRedundantPosition |
1.3.6.1.4.1.207.8.1.3.1.1.18 |
| TurboStack product family only.
This object will retrieve the redundant position of the
port, primary or secondary port, if the port has a
redundant link to it. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
primary(1), secondary(2), notapplicable(3) |
|
| portLearningState |
1.3.6.1.4.1.207.8.1.3.1.1.19 |
|
TurboStack product family only.
This object enable the learning on a port to be shut ON or OFF.
Once the learning is Shut Off, the learning of MAC Address
will stop.
|
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| atiTrapIntruderMacAddress |
1.3.6.1.4.1.207.9.1 |
| The Mac address of the Intruder which is different from the rfc1516
object rptrAddrTrackLastSourceAddress is seen on port which is the
the next object |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| atiTrapIntruderModuleNumber |
1.3.6.1.4.1.207.9.2 |
| This is the module number on which an intruder was seen. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| atiTrapIntruderPortNumber |
1.3.6.1.4.1.207.9.3 |
| This is the port number on which an intruder was seen. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| atiPortChangeDirection |
1.3.6.1.4.1.207.9.4 |
| This is the direction of redundant port change. These two
values are used in the trap atiRedundantPortChangeTrap.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
primarytosecondary(1), secondarytoprimary(2) |
|
| intruderProtectionTrap |
20 |
| This trap is replaced by atiIntruderProtectionTrap starting from
firmware ver 3.0.
AT-3100 and TurboStack product families only.
This trap is sent when an Intruder Alert occurs on a port due
to a received packet with an unauthorized source MAC address.
Intruder Protection for the module must be enabled.
The varBind list contains the MAC address of the intruder. |
| TRAP-TYPE |
|
|
|
| atiIntruderProtectionTrap |
21 |
| AT-3100 and TurboStack product families only.
This trap is sent when an Intruder Alert occurs on a module/port due
to a received packet with an unauthorized source MAC address.
Intruder Protection for the module must be enabled.
The varBind list contains the module number, port number,
and the MAC address of the intruder. |
| TRAP-TYPE |
|
|
|
| atiRedundantPortChangeTrap |
22 |
| TurboStack product family only.
This trap is sent when ports, which are configured for
redundant links, change from primary to secondary or
secondary to primary. |
| TRAP-TYPE |
|
|
|
| ftConfig |
1.3.6.1.4.1.207.2.1 |
| Bridge FT operational parameters |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FtConfig |
|
| ftMaxAge |
1.3.6.1.4.1.207.2.1.1 |
| Seconds before an unreferenced dynamic FT
entry is removed |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| ftMaxRemove |
1.3.6.1.4.1.207.2.1.2 |
| Max number table entries removed each
time table overflows |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| ftMaxFilter |
1.3.6.1.4.1.207.2.1.3 |
| Max number FT entries |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| ftAgeTime |
1.3.6.1.4.1.207.2.1.4 |
| Seconds between FT table entries |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| ftMaxPerm |
1.3.6.1.4.1.207.2.1.5 |
| Max number of permanent FT entries. May be set
to zero which causes all non-system FT entries
to be deleted |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| ftForwMBcast |
1.3.6.1.4.1.207.2.1.6 |
| Flag indicates if multicast (including broadcast)
packets are to be forwarded (1) or discarded (0) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
forwardmulticast(1), filtermulticast(0) |
|
| ftSecureMode |
1.3.6.1.4.1.207.2.1.7 |
| Flag indicates if bridge will learn addresses |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
staticaddr(1), dynamicaddr(0) |
|
| ftEntry |
1.3.6.1.4.1.207.2.2 |
| Bridge FT entries each selected by destination
address |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FtEntry |
|
| ftAddr |
1.3.6.1.4.1.207.2.2.91 |
| destination address (dummy index) |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| ftAge |
1.3.6.1.4.1.207.2.2.1 |
| FT entry age since last referenced in seconds |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| ftDisp |
1.3.6.1.4.1.207.2.2.2 |
| FT entry disposition. Can be more than one OR'ed together |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
dynamicForwardP1(4), dynamicForwardP2(8), dynamicFlood(16), dynamicDiscard(32), staticForwardP1(5), staticForwardP2(9), staticFlood(17), staticDiscard(33), sysSendup(67), sysDiscard(35), sysFlood(83) |
|
| ifePort |
1.3.6.1.4.1.207.3.91 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
port1(1), port2(2) |
|
| ifeInBusErr |
1.3.6.1.4.1.207.3.1 |
| Number of EtherStar read bus errors that
have occurred |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeInShortPkt |
1.3.6.1.4.1.207.3.2 |
| Number of short packets received |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeInAlgError |
1.3.6.1.4.1.207.3.3 |
| Number of packets received with alignment errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeInBadSize |
1.3.6.1.4.1.207.3.4 |
| Number of packets received greater than 1518 bytes |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeInOverflow |
1.3.6.1.4.1.207.3.5 |
| Number of times receive buffer overflowed |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeInCRCErr |
1.3.6.1.4.1.207.3.6 |
| Number of CRC errors detected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeOutColl16 |
1.3.6.1.4.1.207.3.7 |
| Number of packets discarded due to excessive
collisions |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeOutCol |
1.3.6.1.4.1.207.3.8 |
| Number of collisions detected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeOutShortPkt |
1.3.6.1.4.1.207.3.9 |
| Number of short packets transmitted |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeOutUnderflow |
1.3.6.1.4.1.207.3.10 |
| Number of packets transmitted w/programmed
length > buffered transmitted data |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| ifeOutBusErr |
1.3.6.1.4.1.207.3.11 |
| Number of EtherStar write bus errors |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| fcPort |
1.3.6.1.4.1.207.4.91 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| fcInOctets |
1.3.6.1.4.1.207.4.1 |
| Number bytes received by bridge entity on
specified port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| fcInPkts |
1.3.6.1.4.1.207.4.2 |
| Number packets received by bridge entity on
specified port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| fcInNUcastPkts |
1.3.6.1.4.1.207.4.3 |
| Number multicast/broadcast packets received by
bridge enity on specified port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| fcForwOctets |
1.3.6.1.4.1.207.4.4 |
| Number bytes forwarded by bridge entity onto
specified port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| fcForwPkts |
1.3.6.1.4.1.207.4.5 |
| Number of packets forwarded by bridge enity
onto specified port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| fcFiltOctets |
1.3.6.1.4.1.207.4.6 |
| Number of bytes received on specified port
that were discarded by bridge enity |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| fcFiltPkts |
1.3.6.1.4.1.207.4.7 |
| Number of packets dicarded by filtering by
bridge enity |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| sysMemFree |
1.3.6.1.4.1.207.5.1 |
| Number of buffers of a particular size on
the memory free list |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| sysMemAllocFail |
1.3.6.1.4.1.207.5.2 |
| Number of allocation failures for a particular
buffer size |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| sysMemTotAllocFail |
1.3.6.1.4.1.207.5.3 |
| Total number of memory allocation failures |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| sysMemAllocTooBig |
1.3.6.1.4.1.207.5.4 |
| Number of memory allocation requests that failed |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| sysMemFreeFail |
1.3.6.1.4.1.207.5.5 |
| Number of memory free requests that failed |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| sysTimeToReset |
1.3.6.1.4.1.207.5.6 |
| Number of seconds unit bridge reset |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| sysPanicMesg |
1.3.6.1.4.1.207.5.7 |
| Error message associated with last s/w
generated reset |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| sysResetCount |
1.3.6.1.4.1.207.5.8 |
| Number of times bridge has been reset other
than power on/off |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stBridge |
1.3.6.1.4.1.207.6.1 |
| Bridge specific parameters related to
operation of Spanning Tree Protocol |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
StBridge |
|
| stBrName |
1.3.6.1.4.1.207.6.1.1 |
| Comment string denoting the bridge |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| stBrIdent |
1.3.6.1.4.1.207.6.1.2 |
| 802.1 Bridge ID |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| stBrMaxAge |
1.3.6.1.4.1.207.6.1.3 |
| 802.1 Max BPDU Age (sec) for bridge |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stBrHelloTime |
1.3.6.1.4.1.207.6.1.4 |
| 802.1 Hello Time (sec) for bridge |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stBrForwDelay |
1.3.6.1.4.1.207.6.1.5 |
| 802.1 Forward Delay Time (sec) for bridge |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stBrIsRoot |
1.3.6.1.4.1.207.6.1.6 |
| Bridge is root (1=yes 0=no) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
isroot(1), notroot(0) |
|
| stBrIsDesig |
1.3.6.1.4.1.207.6.1.7 |
| Flag indicating status of bridge as designated
bridge (1=yes 0=no) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
isdesigbridge(1), notdesigbridge(0) |
|
| stBrSpanAddr |
1.3.6.1.4.1.207.6.1.8 |
| MAC address used as Spanning Tree Protocol
multicast address |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| stBrPriority |
1.3.6.1.4.1.207.6.1.9 |
| 802.1 bridge priority |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stBrSTPDisabled |
1.3.6.1.4.1.207.6.1.10 |
| Variable to enable/disable operation of Spanning
Tree (1=STP on 0=STP off) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
stpdisabled(1), stpenable(0) |
|
| stRoot |
1.3.6.1.4.1.207.6.2 |
| Parameters related to operation of Spanning
Tree Protocol for Root bridge |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
StRoot |
|
| stRtIdent |
1.3.6.1.4.1.207.6.2.1 |
| 802.1 Bridge ID of current Root bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| stRtCost |
1.3.6.1.4.1.207.6.2.2 |
| 802.1 Root Path Cost of current Root bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stRtPort |
1.3.6.1.4.1.207.6.2.3 |
| Port number of port that provides path to
current Root bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
rootport1(1), roorport2(2) |
|
| stRtMaxAge |
1.3.6.1.4.1.207.6.2.4 |
| 802.1 Max BPDU Age specified by current known Root bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stRtHelloTime |
1.3.6.1.4.1.207.6.2.5 |
| 802.1 Hello Time specified by current Root bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stRtForwDelay |
1.3.6.1.4.1.207.6.2.6 |
| 802.1 Forward Delay specified by current Root
bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stPort |
1.3.6.1.4.1.207.6.3 |
| Port specific parameters related to operation of
Spanning Tree Protocol |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
StPort |
|
| stPrtPort |
1.3.6.1.4.1.207.6.3.91 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
port1(1), port2(2) |
|
| stPrtState |
1.3.6.1.4.1.207.6.3.1 |
| 802.1 Port State disable and blocked states |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), blocked(1), listen(2), learn(4), forward(8) |
|
| stPrtCost |
1.3.6.1.4.1.207.6.3.2 |
| 802.1 Port Path Cost |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stPrtIsDesig |
1.3.6.1.4.1.207.6.3.3 |
| Status of port as designated port for LAN |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
isDesig(1), notDesig(0) |
|
| stPrtIsRoot |
1.3.6.1.4.1.207.6.3.4 |
| Status of port as Root Port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
isRoot(1), notRoot(0) |
|
| stPrtDesigRoot |
1.3.6.1.4.1.207.6.3.5 |
| Bridge ID of Root brigde |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| stPrtDesigCost |
1.3.6.1.4.1.207.6.3.6 |
| Path Cost to Root bridge as advertised by the designated bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stPrtDesigBridge |
1.3.6.1.4.1.207.6.3.7 |
| Bridge ID of designated bridge |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stPrtDesigPort |
1.3.6.1.4.1.207.6.3.8 |
| Port ID of designated port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stPrtPriority |
1.3.6.1.4.1.207.6.3.9 |
| 802.1 Port Priority |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| spanTreeStats |
1.3.6.1.4.1.207.6.4 |
| Spanning Tree stats on counters |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SpanTreeStats |
|
| stsPort |
1.3.6.1.4.1.207.6.4.91 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| stsTopoChanges |
1.3.6.1.4.1.207.6.4.1 |
| Number of topology changes that have occured
since power-on |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsConfigTimeout |
1.3.6.1.4.1.207.6.4.2 |
| Number of timeouts due to config BPDU not received |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsPortDisable |
1.3.6.1.4.1.207.6.4.3 |
| Number of times port has been disabled since
power-on |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsPortEnable |
1.3.6.1.4.1.207.6.4.4 |
| Number of times port has been enabled since
power-on |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsInBadLen |
1.3.6.1.4.1.207.6.4.5 |
| Number of STP frames received with bad lenth
by this port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsInUnknown |
1.3.6.1.4.1.207.6.4.6 |
| Packets received with bad 802.3 LSAP number by
this port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsIn8021Man |
1.3.6.1.4.1.207.6.4.7 |
| Packets received with 802.1 Management LSAP
(discarded) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsInConfig |
1.3.6.1.4.1.207.6.4.8 |
| Number of config BPDUs received by this port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsOutConfig |
1.3.6.1.4.1.207.6.4.9 |
| Number of config BPDUs transmitted by this port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| stsOutTopoChg |
1.3.6.1.4.1.207.6.4.10 |
| Number of Topology Change Notification BPDU
transmitted by this port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| frNumRange |
1.3.6.1.4.1.207.7.1 |
| The maximum number of filter range table entries when
read (GET). Set to zero to delete all filter range
table entries. A set with any other value is ignored. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| frEntry |
1.3.6.1.4.1.207.7.2 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
OCTET STRING |
|
| frIndex |
1.3.6.1.4.1.207.7.91 |
| Tok_String |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|