ASCEND-MIBX25-MIB

File: ASCEND-MIBX25-MIB.mib (17066 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
STRING    

Mibx25ProfileEntry  
SEQUENCE    
  x25Profile-X25Name DisplayString
  x25Profile-Active INTEGER
  x25Profile-Kludge INTEGER
  x25Profile-NailedUpGroup INTEGER
  x25Profile-NailedMode INTEGER
  x25Profile-CalledNumberType INTEGER
  x25Profile-SwitchedCallType INTEGER
  x25Profile-PhoneNumber DisplayString
  x25Profile-BillingNumber DisplayString
  x25Profile-TransitNumber DisplayString
  x25Profile-CallByCallId INTEGER
  x25Profile-oT1Val INTEGER
  x25Profile-oT2Val INTEGER
  x25Profile-oN2Val INTEGER
  x25Profile-KVal INTEGER
  x25Profile-IdleVal INTEGER
  x25Profile-oPktWindow INTEGER
  x25Profile-Maxwinsize INTEGER
  x25Profile-Defwinsize INTEGER
  x25Profile-oPktSize INTEGER
  x25Profile-oMinPktSize INTEGER
  x25Profile-Defpktsize INTEGER
  x25Profile-oMaxPktSize INTEGER
  x25Profile-LowestPVC INTEGER
  x25Profile-HighestPVC INTEGER
  x25Profile-LowestSVC INTEGER
  x25Profile-HighestSVC INTEGER
  x25Profile-ClearDiag INTEGER
  x25Profile-ResetDiag INTEGER
  x25Profile-RestartDiag INTEGER
  x25Profile-Pktdiag INTEGER
  x25Profile-PktOptions INTEGER
  x25Profile-PktT20 INTEGER
  x25Profile-PktR20 INTEGER
  x25Profile-PktT21 INTEGER
  x25Profile-PktT22 INTEGER
  x25Profile-PktR22 INTEGER
  x25Profile-PktT23 INTEGER
  x25Profile-PktR23 INTEGER
  x25Profile-X25SrcAddress DisplayString
  x25Profile-DteFlag INTEGER
  x25Profile-NetType INTEGER
  x25Profile-oDiscMode INTEGER
  x25Profile-oSeqNumbers INTEGER
  x25Profile-ReverseChargeAcceptance INTEGER
  x25Profile-ClosedUserGroups INTEGER
  x25Profile-oVceTimerVal INTEGER
  x25Profile-oX25DTeiValue INTEGER
  x25Profile-oPriNumberValue DisplayString
  x25Profile-Action-o INTEGER

Defined Values

mibx25Profile 1.3.6.1.4.1.529.23.140
OBJECT IDENTIFIER    

mibx25ProfileTable 1.3.6.1.4.1.529.23.140.1
A list of mibx25Profile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibx25ProfileEntry

mibx25ProfileEntry 1.3.6.1.4.1.529.23.140.1.1
A mibx25Profile entry containing objects that maps to the parameters of mibx25Profile profile.
OBJECT-TYPE    
  Mibx25ProfileEntry  

x25Profile-X25Name 1.3.6.1.4.1.529.23.140.1.1.1
Name of the X.25 profile.
OBJECT-TYPE    
  DisplayString  

x25Profile-Active 1.3.6.1.4.1.529.23.140.1.1.2
Indicates whether this profile is to be included in the X.25 table.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

x25Profile-Kludge 1.3.6.1.4.1.529.23.140.1.1.3
This is a kludge to indicate that the physical line is to be brought down before connecting. It is also used for outsequence on a reset. This byte formally a fill.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

x25Profile-NailedUpGroup 1.3.6.1.4.1.529.23.140.1.1.4
Specifies the nailed group number.
OBJECT-TYPE    
  INTEGER  

x25Profile-NailedMode 1.3.6.1.4.1.529.23.140.1.1.5
Specifies whether it is a nailed or switched.
OBJECT-TYPE    
  INTEGER off(1), ft1(2), ft1Mpp(3), bri(4), ft1Bo(5), dChan(6), aodi(7), megamax(8)  

x25Profile-CalledNumberType 1.3.6.1.4.1.529.23.140.1.1.6
Indication of whether national national number, international number, etc. is specified.
OBJECT-TYPE    
  INTEGER  

x25Profile-SwitchedCallType 1.3.6.1.4.1.529.23.140.1.1.7
Type of bearer channel capability to set up for each switched call in the session.
OBJECT-TYPE    
  INTEGER voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)  

x25Profile-PhoneNumber 1.3.6.1.4.1.529.23.140.1.1.8
The phonenumber of the named host.
OBJECT-TYPE    
  DisplayString  

x25Profile-BillingNumber 1.3.6.1.4.1.529.23.140.1.1.9
A number used for billing purposes.
OBJECT-TYPE    
  DisplayString  

x25Profile-TransitNumber 1.3.6.1.4.1.529.23.140.1.1.10
The string for use in the 'transit network ie' for PRI calling when going through a LEC.
OBJECT-TYPE    
  DisplayString  

x25Profile-CallByCallId 1.3.6.1.4.1.529.23.140.1.1.11
Id for the call-by-call signalling for PRI.
OBJECT-TYPE    
  INTEGER  

x25Profile-oT1Val 1.3.6.1.4.1.529.23.140.1.1.12
The time interval during which the LAPB shall expect to receive an acknowledgment to an outstanding I PDU or an expected response to a sent unnumbered PDU.
OBJECT-TYPE    
  INTEGER  

x25Profile-oT2Val 1.3.6.1.4.1.529.23.140.1.1.13
The maximum delay at LAPB before transmitting a delayed RR. This must be considerably less than T1 the Acknowledgment Timer value.
OBJECT-TYPE    
  INTEGER  

x25Profile-oN2Val 1.3.6.1.4.1.529.23.140.1.1.14
Maximum number of times that a PDU is sent following the expiry of the Acknowledgment Timer.
OBJECT-TYPE    
  INTEGER  

x25Profile-KVal 1.3.6.1.4.1.529.23.140.1.1.15
LAPB Window size specifying the number of unacknowledged I PDUs which may be sent.
OBJECT-TYPE    
  INTEGER  

x25Profile-IdleVal 1.3.6.1.4.1.529.23.140.1.1.45
Timer used to poll the the remote LAPB when there is no activity on the link to ensure the remote station is still alive. A value of zero disables this function.
OBJECT-TYPE    
  INTEGER  

x25Profile-oPktWindow 1.3.6.1.4.1.529.23.140.1.1.16
X.25 Packet Window size.
OBJECT-TYPE    
  INTEGER  

x25Profile-Maxwinsize 1.3.6.1.4.1.529.23.140.1.1.46
Maximum X.25 Window size which will be negotiated on calls.
OBJECT-TYPE    
  INTEGER  

x25Profile-Defwinsize 1.3.6.1.4.1.529.23.140.1.1.47
Default X.25 Window size to use if not specified during call establishment.
OBJECT-TYPE    
  INTEGER  

x25Profile-oPktSize 1.3.6.1.4.1.529.23.140.1.1.17
X.25 default Packet size.
OBJECT-TYPE    
  INTEGER  

x25Profile-oMinPktSize 1.3.6.1.4.1.529.23.140.1.1.18
X.25 log base 2 of min packet size in negotiation.
OBJECT-TYPE    
  INTEGER n-6(7), n-7(8), n-8(9), n-9(10), n-10(11), n-11(12), n-12(13)  

x25Profile-Defpktsize 1.3.6.1.4.1.529.23.140.1.1.48
Default X.25 Packet size to use if not specified during call establishment.
OBJECT-TYPE    
  INTEGER n-6(7), n-7(8), n-8(9), n-9(10), n-10(11), n-11(12), n-12(13)  

x25Profile-oMaxPktSize 1.3.6.1.4.1.529.23.140.1.1.19
Maximum X.25 Packet size which will be negotiated on calls.
OBJECT-TYPE    
  INTEGER n-6(7), n-7(8), n-8(9), n-9(10), n-10(11), n-11(12), n-12(13)  

x25Profile-LowestPVC 1.3.6.1.4.1.529.23.140.1.1.20
X.25 logical channel number assigned to the lowest PVC.
OBJECT-TYPE    
  INTEGER  

x25Profile-HighestPVC 1.3.6.1.4.1.529.23.140.1.1.21
X.25 logical channel number assigned to the highest PVC.
OBJECT-TYPE    
  INTEGER  

x25Profile-LowestSVC 1.3.6.1.4.1.529.23.140.1.1.22
X.25 logical channel number assigned to the lowest SVC.
OBJECT-TYPE    
  INTEGER  

x25Profile-HighestSVC 1.3.6.1.4.1.529.23.140.1.1.23
X.25 logical channel number assigned to the highest SVC.
OBJECT-TYPE    
  INTEGER  

x25Profile-ClearDiag 1.3.6.1.4.1.529.23.140.1.1.24
X.25 Clear request has DIAG.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

x25Profile-ResetDiag 1.3.6.1.4.1.529.23.140.1.1.25
X.25 reset request has DIAG.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

x25Profile-RestartDiag 1.3.6.1.4.1.529.23.140.1.1.26
X.25 restart request has DIAG.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

x25Profile-Pktdiag 1.3.6.1.4.1.529.23.140.1.1.49
Incoming Restart, Clear and Reset Indications will contain the diagnostic byte
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

x25Profile-PktOptions 1.3.6.1.4.1.529.23.140.1.1.27
X.25 packet level options.
OBJECT-TYPE    
  INTEGER none(1), npws(2), afna(3), npwsAfna(4)  

x25Profile-PktT20 1.3.6.1.4.1.529.23.140.1.1.28
X.25 restart request response timer.
OBJECT-TYPE    
  INTEGER  

x25Profile-PktR20 1.3.6.1.4.1.529.23.140.1.1.29
Number of times an X.25 restart request will be retried.
OBJECT-TYPE    
  INTEGER  

x25Profile-PktT21 1.3.6.1.4.1.529.23.140.1.1.30
X.25 call request response timer.
OBJECT-TYPE    
  INTEGER  

x25Profile-PktT22 1.3.6.1.4.1.529.23.140.1.1.31
X.25 reset request response timer.
OBJECT-TYPE    
  INTEGER  

x25Profile-PktR22 1.3.6.1.4.1.529.23.140.1.1.32
Number of times an X.25 reset request will be retried.
OBJECT-TYPE    
  INTEGER  

x25Profile-PktT23 1.3.6.1.4.1.529.23.140.1.1.33
X.25 clear request response timer.
OBJECT-TYPE    
  INTEGER  

x25Profile-PktR23 1.3.6.1.4.1.529.23.140.1.1.34
Number of times an X.25 clear request will be retried.
OBJECT-TYPE    
  INTEGER  

x25Profile-X25SrcAddress 1.3.6.1.4.1.529.23.140.1.1.50
X.25 source address
OBJECT-TYPE    
  DisplayString  

x25Profile-DteFlag 1.3.6.1.4.1.529.23.140.1.1.36
Indicates the DTE/DCE nature of the X.25 protocol.
OBJECT-TYPE    
  INTEGER dce(1), dte(2)  

x25Profile-NetType 1.3.6.1.4.1.529.23.140.1.1.37
Net Type Enum
OBJECT-TYPE    
  INTEGER ccitt(1), ddn(2)  

x25Profile-oDiscMode 1.3.6.1.4.1.529.23.140.1.1.38
Disc Mode: Active or passive
OBJECT-TYPE    
  INTEGER passive(1), active(2)  

x25Profile-oSeqNumbers 1.3.6.1.4.1.529.23.140.1.1.39
Sequence numbers mode: normal or extended
OBJECT-TYPE    
  INTEGER normal(1), extended(2)  

x25Profile-ReverseChargeAcceptance 1.3.6.1.4.1.529.23.140.1.1.40
Reverse Charge Acceptance if set permits the use of reverse charges on Incoming Call packets.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

x25Profile-ClosedUserGroups 1.3.6.1.4.1.529.23.140.1.1.51
Type of Closed User Group facilities subscribed to.
OBJECT-TYPE    
  INTEGER none(1), noiob(2), noioe(3), prefb(4), prefe(5), oab(6), oae(7)  

x25Profile-oVceTimerVal 1.3.6.1.4.1.529.23.140.1.1.41
Virtual Call Establishment Timer Interval: number of seconds to maintain a connection to a character oriented device that has not established a virtual call. A value of 0 disables the timer box-wide
OBJECT-TYPE    
  INTEGER  

x25Profile-oX25DTeiValue 1.3.6.1.4.1.529.23.140.1.1.42
TEI to be used when D-channel X.25
OBJECT-TYPE    
  INTEGER  

x25Profile-oPriNumberValue 1.3.6.1.4.1.529.23.140.1.1.43
Phone number to be used for BAP
OBJECT-TYPE    
  DisplayString  

x25Profile-Action-o 1.3.6.1.4.1.529.23.140.1.1.44
Tok_String
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)