ASCEND-MIBT1NET-MIB

File: ASCEND-MIBT1NET-MIB.mib (97312 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
STRING    

Mibt1NetworkProfileEntry  
SEQUENCE    
  t1NetworkProfile-Shelf-o INTEGER
  t1NetworkProfile-Slot-o INTEGER
  t1NetworkProfile-Item-o INTEGER
  t1NetworkProfile-Name DisplayString
  t1NetworkProfile-PhysicalAddress-Shelf INTEGER
  t1NetworkProfile-PhysicalAddress-Slot INTEGER
  t1NetworkProfile-PhysicalAddress-ItemNumber INTEGER
  t1NetworkProfile-LineInterface-Enabled INTEGER
  t1NetworkProfile-LineInterface-TOnlineType INTEGER
  t1NetworkProfile-LineInterface-FrameType INTEGER
  t1NetworkProfile-LineInterface-Encoding INTEGER
  t1NetworkProfile-LineInterface-ClockSource INTEGER
  t1NetworkProfile-LineInterface-ClockPriority INTEGER
  t1NetworkProfile-LineInterface-SignalingMode INTEGER
  t1NetworkProfile-LineInterface-IsdnEmulationSide INTEGER
  t1NetworkProfile-LineInterface-RobbedBitMode INTEGER
  t1NetworkProfile-LineInterface-DefaultCallType INTEGER
  t1NetworkProfile-LineInterface-SwitchType INTEGER
  t1NetworkProfile-LineInterface-NfasGroupId INTEGER
  t1NetworkProfile-LineInterface-NfasId INTEGER
  t1NetworkProfile-LineInterface-IncomingCallHandling INTEGER
  t1NetworkProfile-LineInterface-DeleteDigits INTEGER
  t1NetworkProfile-LineInterface-AddDigitString DisplayString
  t1NetworkProfile-LineInterface-CallByCall INTEGER
  t1NetworkProfile-LineInterface-NetworkSpecificFacilities INTEGER
  t1NetworkProfile-LineInterface-PbxAnswerNumber DisplayString
  t1NetworkProfile-LineInterface-AnswerService INTEGER
  t1NetworkProfile-LineInterface-oPBXType INTEGER
  t1NetworkProfile-LineInterface-DataSense INTEGER
  t1NetworkProfile-LineInterface-IdleMode INTEGER
  t1NetworkProfile-LineInterface-oFDL INTEGER
  t1NetworkProfile-LineInterface-FrontEndType INTEGER
  t1NetworkProfile-LineInterface-oDSXLineLength INTEGER
  t1NetworkProfile-LineInterface-oCSUBuildOut INTEGER
  t1NetworkProfile-LineInterface-OverlapReceiving INTEGER
  t1NetworkProfile-LineInterface-PriPrefixNumber DisplayString
  t1NetworkProfile-LineInterface-TrailingDigits INTEGER
  t1NetworkProfile-LineInterface-T302Timer INTEGER
  t1NetworkProfile-LineInterface-Layer3End INTEGER
  t1NetworkProfile-LineInterface-Layer2End INTEGER
  t1NetworkProfile-LineInterface-NlValue INTEGER
  t1NetworkProfile-LineInterface-LoopAvoidance INTEGER
  t1NetworkProfile-LineInterface-MaintenanceState INTEGER
  t1NetworkProfile-LineInterface-NumberComplete INTEGER
  t1NetworkProfile-LineInterface-GroupBAnswerSignal INTEGER
  t1NetworkProfile-LineInterface-GroupBBusySignal INTEGER
  t1NetworkProfile-LineInterface-GroupBNoMatchSignal INTEGER
  t1NetworkProfile-LineInterface-GroupBCollectSignal INTEGER
  t1NetworkProfile-LineInterface-GroupBNoChargeSignal INTEGER
  t1NetworkProfile-LineInterface-GroupIiSignal INTEGER
  t1NetworkProfile-LineInterface-InputSampleCount INTEGER
  t1NetworkProfile-LineInterface-AnswerDelay INTEGER
  t1NetworkProfile-LineInterface-CallerId INTEGER
  t1NetworkProfile-LineInterface-LineSignaling INTEGER
  t1NetworkProfile-LineInterface-Timer1CollectCall INTEGER
  t1NetworkProfile-LineInterface-Timer2CollectCall INTEGER
  t1NetworkProfile-LineInterface-SendDiscVal INTEGER
  t1NetworkProfile-LineInterface-HuntGrpPhoneNumber1 DisplayString
  t1NetworkProfile-LineInterface-HuntGrpPhoneNumber2 DisplayString
  t1NetworkProfile-LineInterface-HuntGrpPhoneNumber3 DisplayString
  t1NetworkProfile-LineInterface-PriTypeOfNumber INTEGER
  t1NetworkProfile-LineInterface-PriNumberingPlanId INTEGER
  t1NetworkProfile-LineInterface-SuperFrameSrcLineNumber INTEGER
  t1NetworkProfile-LineInterface-CollectIncomingDigits INTEGER
  t1NetworkProfile-LineInterface-T1InterDigitTimeout INTEGER
  t1NetworkProfile-LineInterface-R1UseAnir INTEGER
  t1NetworkProfile-LineInterface-R1FirstDigitTimer INTEGER
  t1NetworkProfile-LineInterface-R1AnirDelay INTEGER
  t1NetworkProfile-LineInterface-R1AnirTimer INTEGER
  t1NetworkProfile-LineInterface-R1Modified INTEGER
  t1NetworkProfile-LineInterface-FirstDs0 INTEGER
  t1NetworkProfile-LineInterface-LastDs0 INTEGER
  t1NetworkProfile-LineInterface-NailedGroup INTEGER
  t1NetworkProfile-LineInterface-Ss7Continuity-IncomingProcedure INTEGER
  t1NetworkProfile-LineInterface-Ss7Continuity-OutgoingProcedure INTEGER
  t1NetworkProfile-LineInterface-LineProvision INTEGER
  t1NetworkProfile-LineInterface-Gr303Mode INTEGER
  t1NetworkProfile-LineInterface-Gr303GroupId INTEGER
  t1NetworkProfile-LineInterface-Gr303Ds1Id INTEGER
  t1NetworkProfile-LineInterface-SwitchVersion INTEGER
  t1NetworkProfile-LineInterface-DownTransDelay INTEGER
  t1NetworkProfile-LineInterface-UpTransDelay INTEGER
  t1NetworkProfile-LineInterface-StatusChangeTrapEnable INTEGER
  t1NetworkProfile-LineInterface-CauseCodeVerificationEnable INTEGER
  t1NetworkProfile-BackToBack INTEGER
  t1NetworkProfile-ChannelUsage INTEGER
  t1NetworkProfile-Action-o INTEGER

Mibt1NetworkProfile-LineInterface-ChannelConfigEntry  
SEQUENCE    
  t1NetworkProfile-LineInterface-ChannelConfig-Shelf-o INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-Slot-o INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-Item-o INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-Index-o INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-ChannelUsage INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-TrunkGroup INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-PhoneNumber DisplayString
  t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-NailedGroup INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-ChanGroup INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-DestChanGroup INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-DialPlanNumber INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits INTEGER
  t1NetworkProfile-LineInterface-ChannelConfig-IdlePattern INTEGER

Mibt1NetworkProfileV1Entry  
SEQUENCE    
  t1NetworkProfileV1-ProfileNumber INTEGER
  t1NetworkProfileV1-Name DisplayString
  t1NetworkProfileV1-PhysicalAddress-Shelf INTEGER
  t1NetworkProfileV1-PhysicalAddress-Slot INTEGER
  t1NetworkProfileV1-PhysicalAddress-ItemNumber INTEGER
  t1NetworkProfileV1-BackToBack INTEGER
  t1NetworkProfileV1-PrimaryChannelUsage INTEGER
  t1NetworkProfileV1-SecondaryChannelUsage INTEGER
  t1NetworkProfileV1-TertiaryChannelUsage INTEGER
  t1NetworkProfileV1-Action-o INTEGER

Mibt1NetworkProfileV1-LineInterfaceEntry  
SEQUENCE    
  t1NetworkProfileV1-LineInterface-Name DisplayString
  t1NetworkProfileV1-LineInterface-Index-o INTEGER
  t1NetworkProfileV1-LineInterface-Enabled INTEGER
  t1NetworkProfileV1-LineInterface-TOnlineType INTEGER
  t1NetworkProfileV1-LineInterface-FrameType INTEGER
  t1NetworkProfileV1-LineInterface-Encoding INTEGER
  t1NetworkProfileV1-LineInterface-ClockSource INTEGER
  t1NetworkProfileV1-LineInterface-ClockPriority INTEGER
  t1NetworkProfileV1-LineInterface-SignalingMode INTEGER
  t1NetworkProfileV1-LineInterface-IsdnEmulationSide INTEGER
  t1NetworkProfileV1-LineInterface-RobbedBitMode INTEGER
  t1NetworkProfileV1-LineInterface-DefaultCallType INTEGER
  t1NetworkProfileV1-LineInterface-SwitchType INTEGER
  t1NetworkProfileV1-LineInterface-NfasGroupId INTEGER
  t1NetworkProfileV1-LineInterface-NfasId INTEGER
  t1NetworkProfileV1-LineInterface-IncomingCallHandling INTEGER
  t1NetworkProfileV1-LineInterface-DeleteDigits INTEGER
  t1NetworkProfileV1-LineInterface-AddDigitString DisplayString
  t1NetworkProfileV1-LineInterface-CallByCall INTEGER
  t1NetworkProfileV1-LineInterface-NetworkSpecificFacilities INTEGER
  t1NetworkProfileV1-LineInterface-PbxAnswerNumber DisplayString
  t1NetworkProfileV1-LineInterface-AnswerService INTEGER
  t1NetworkProfileV1-LineInterface-oPBXType INTEGER
  t1NetworkProfileV1-LineInterface-DataSense INTEGER
  t1NetworkProfileV1-LineInterface-IdleMode INTEGER
  t1NetworkProfileV1-LineInterface-oFDL INTEGER
  t1NetworkProfileV1-LineInterface-FrontEndType INTEGER
  t1NetworkProfileV1-LineInterface-oDSXLineLength INTEGER
  t1NetworkProfileV1-LineInterface-oCSUBuildOut INTEGER
  t1NetworkProfileV1-LineInterface-OverlapReceiving INTEGER
  t1NetworkProfileV1-LineInterface-PriPrefixNumber DisplayString
  t1NetworkProfileV1-LineInterface-TrailingDigits INTEGER
  t1NetworkProfileV1-LineInterface-T302Timer INTEGER
  t1NetworkProfileV1-LineInterface-Layer3End INTEGER
  t1NetworkProfileV1-LineInterface-Layer2End INTEGER
  t1NetworkProfileV1-LineInterface-NlValue INTEGER
  t1NetworkProfileV1-LineInterface-LoopAvoidance INTEGER
  t1NetworkProfileV1-LineInterface-MaintenanceState INTEGER
  t1NetworkProfileV1-LineInterface-NumberComplete INTEGER
  t1NetworkProfileV1-LineInterface-GroupBAnswerSignal INTEGER
  t1NetworkProfileV1-LineInterface-GroupBBusySignal INTEGER
  t1NetworkProfileV1-LineInterface-GroupBNoMatchSignal INTEGER
  t1NetworkProfileV1-LineInterface-GroupBCollectSignal INTEGER
  t1NetworkProfileV1-LineInterface-GroupBNoChargeSignal INTEGER
  t1NetworkProfileV1-LineInterface-GroupIiSignal INTEGER
  t1NetworkProfileV1-LineInterface-InputSampleCount INTEGER
  t1NetworkProfileV1-LineInterface-AnswerDelay INTEGER
  t1NetworkProfileV1-LineInterface-CallerId INTEGER
  t1NetworkProfileV1-LineInterface-LineSignaling INTEGER
  t1NetworkProfileV1-LineInterface-Timer1CollectCall INTEGER
  t1NetworkProfileV1-LineInterface-Timer2CollectCall INTEGER
  t1NetworkProfileV1-LineInterface-SendDiscVal INTEGER
  t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber1 DisplayString
  t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber2 DisplayString
  t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber3 DisplayString
  t1NetworkProfileV1-LineInterface-PriTypeOfNumber INTEGER
  t1NetworkProfileV1-LineInterface-PriNumberingPlanId INTEGER
  t1NetworkProfileV1-LineInterface-SuperFrameSrcLineNumber INTEGER
  t1NetworkProfileV1-LineInterface-CollectIncomingDigits INTEGER
  t1NetworkProfileV1-LineInterface-T1InterDigitTimeout INTEGER
  t1NetworkProfileV1-LineInterface-R1UseAnir INTEGER
  t1NetworkProfileV1-LineInterface-R1FirstDigitTimer INTEGER
  t1NetworkProfileV1-LineInterface-R1AnirDelay INTEGER
  t1NetworkProfileV1-LineInterface-R1AnirTimer INTEGER
  t1NetworkProfileV1-LineInterface-R1Modified INTEGER
  t1NetworkProfileV1-LineInterface-FirstDs0 INTEGER
  t1NetworkProfileV1-LineInterface-LastDs0 INTEGER
  t1NetworkProfileV1-LineInterface-NailedGroup INTEGER
  t1NetworkProfileV1-LineInterface-Ss7Continuity-IncomingProcedure INTEGER
  t1NetworkProfileV1-LineInterface-Ss7Continuity-OutgoingProcedure INTEGER
  t1NetworkProfileV1-LineInterface-LineProvision INTEGER
  t1NetworkProfileV1-LineInterface-Gr303Mode INTEGER
  t1NetworkProfileV1-LineInterface-Gr303GroupId INTEGER
  t1NetworkProfileV1-LineInterface-Gr303Ds1Id INTEGER
  t1NetworkProfileV1-LineInterface-SwitchVersion INTEGER
  t1NetworkProfileV1-LineInterface-DownTransDelay INTEGER
  t1NetworkProfileV1-LineInterface-UpTransDelay INTEGER
  t1NetworkProfileV1-LineInterface-StatusChangeTrapEnable INTEGER
  t1NetworkProfileV1-LineInterface-CauseCodeVerificationEnable INTEGER

Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry  
SEQUENCE    
  t1NetworkProfileV1-LineInterface-ChannelConfig-Name DisplayString
  t1NetworkProfileV1-LineInterface-ChannelConfig-Index-o INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-Index1-o INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-ChannelUsage INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-TrunkGroup INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-PhoneNumber DisplayString
  t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-NailedGroup INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-ChanGroup INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-DestChanGroup INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-DialPlanNumber INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits INTEGER
  t1NetworkProfileV1-LineInterface-ChannelConfig-IdlePattern INTEGER

Defined Values

mibt1NetworkProfile 1.3.6.1.4.1.529.23.127
OBJECT IDENTIFIER    

mibt1NetworkProfileV1 1.3.6.1.4.1.529.23.126
OBJECT IDENTIFIER    

mibt1NetworkProfileTable 1.3.6.1.4.1.529.23.127.1
A list of mibt1NetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileEntry

mibt1NetworkProfileEntry 1.3.6.1.4.1.529.23.127.1.1
A mibt1NetworkProfile entry containing objects that maps to the parameters of mibt1NetworkProfile profile.
OBJECT-TYPE    
  Mibt1NetworkProfileEntry  

t1NetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.127.1.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-Slot-o 1.3.6.1.4.1.529.23.127.1.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-Item-o 1.3.6.1.4.1.529.23.127.1.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-Name 1.3.6.1.4.1.529.23.127.1.1.4
Name of DS1 line.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.127.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

t1NetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.127.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

t1NetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.127.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Enabled 1.3.6.1.4.1.529.23.127.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-TOnlineType 1.3.6.1.4.1.529.23.127.1.1.9
The tonline type of an e1 line.
OBJECT-TYPE    
  INTEGER none(1), nt(2), te(3), numberOfTonline(4)  

t1NetworkProfile-LineInterface-FrameType 1.3.6.1.4.1.529.23.127.1.1.10
The super-framing mode that is used on the physical link(s).
OBJECT-TYPE    
  INTEGER d4(1), esf(2), g703(3), n-2ds(4)  

t1NetworkProfile-LineInterface-Encoding 1.3.6.1.4.1.529.23.127.1.1.11
The layer 1 line encoding used for the physical link(s).
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3), none(4)  

t1NetworkProfile-LineInterface-ClockSource 1.3.6.1.4.1.529.23.127.1.1.12
Tok_String
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

t1NetworkProfile-LineInterface-ClockPriority 1.3.6.1.4.1.529.23.127.1.1.13
Clock priority assigned to the T1 line. Used to select particular lines as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

t1NetworkProfile-LineInterface-SignalingMode 1.3.6.1.4.1.529.23.127.1.1.14
Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling.
OBJECT-TYPE    
  INTEGER inband(1), isdn(2), isdnNfas(3), e1R2Signaling(5), e1KoreanSignaling(6), e1P7Signaling(7), e1ChineseSignaling(8), e1MeteredSignaling(9), e1NoSignaling(10), e1DpnssSignaling(11), e1ArgentinaSignaling(13), e1BrazilSignaling(14), e1PhilippineSignaling(15), e1IndianSignaling(16), e1CzechSignaling(17), e1MalaysiaSignaling(19), e1NewZealandSignaling(20), e1IsraelSignaling(21), e1ThailandSignaling(22), e1KuwaitSignaling(23), e1MexicoSignaling(24), dtmfR2Signaling(25), tunneledPriSignaling(27), inbandFgdInFgdOut(28), inbandFgdInFgcOut(29), inbandFgcInFgcOut(30), inbandFgcInFgdOut(31), e1VietnamSignaling(32), ss7SigTrunk(33), h248DataTrunk(34)  

t1NetworkProfile-LineInterface-IsdnEmulationSide 1.3.6.1.4.1.529.23.127.1.1.15
Side the line will emulate: TE (user), or NT (network).
OBJECT-TYPE    
  INTEGER te(1), nt(2)  

t1NetworkProfile-LineInterface-RobbedBitMode 1.3.6.1.4.1.529.23.127.1.1.16
Wink start, idle start, incoming wink.
OBJECT-TYPE    
  INTEGER winkStart(1), idleStart(2), incW200(3), incW400(4), loopStart(5), groundStart(6)  

t1NetworkProfile-LineInterface-DefaultCallType 1.3.6.1.4.1.529.23.127.1.1.17
Specify the default call-type for incoming calls, for purposes of call routing and signalling.
OBJECT-TYPE    
  INTEGER digital(1), voice(2), dnisOrVoice(3), dnisOrDigital(4), voip(5), dnisOrVoip(6)  

t1NetworkProfile-LineInterface-SwitchType 1.3.6.1.4.1.529.23.127.1.1.18
The network switch type, needed for ISDN/NFAS signaling.
OBJECT-TYPE    
  INTEGER attPri(1), ntiPri(2), globandPri(3), japanPri(4), vn3Pri(5), onetr6Pri(6), net5Pri(7), danishPri(8), australPri(9), natIsdn2Pri(10), taiwanPri(31), isdxDpnss(11), islxDpnss(12), mercuryDpnss(13), dass2(14), btSs7(32), unknownBri(15), att5essBri(16), dms100Nt1Bri(17), nisdn1Bri(18), vn2Bri(19), btnr191Bri(20), net3Bri(21), ptpNet3Bri(22), kddBri(23), belgianBri(24), australBri(25), swissBri(26), german1tr6Bri(27), dutch1tr6Bri(28), switchCas(29), idslPtpBri(30)  

t1NetworkProfile-LineInterface-NfasGroupId 1.3.6.1.4.1.529.23.127.1.1.19
For NFAS lines: the nfas group id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-NfasId 1.3.6.1.4.1.529.23.127.1.1.20
For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-IncomingCallHandling 1.3.6.1.4.1.529.23.127.1.1.21
This parameter is used to determine the type of processing required for incoming calls from this line.
OBJECT-TYPE    
  INTEGER rejectAll(1), internalProcessing(2), ss7GatewayProcessing(3)  

t1NetworkProfile-LineInterface-DeleteDigits 1.3.6.1.4.1.529.23.127.1.1.22
Number of digits to delete from numbers received from a PBX.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-AddDigitString 1.3.6.1.4.1.529.23.127.1.1.23
String of digits to prepend to phone number received from PBX.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-CallByCall 1.3.6.1.4.1.529.23.127.1.1.24
Call-by-call value to set when routing calls from PBX to network.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-NetworkSpecificFacilities 1.3.6.1.4.1.529.23.127.1.1.87
Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-PbxAnswerNumber 1.3.6.1.4.1.529.23.127.1.1.25
The answer number that is the equivalent of a port answer-number used for the network to pbx routing.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-AnswerService 1.3.6.1.4.1.529.23.127.1.1.26
The switched service type (or none) that is used for routing network calls to the pbx.
OBJECT-TYPE    
  INTEGER voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)  

t1NetworkProfile-LineInterface-oPBXType 1.3.6.1.4.1.529.23.127.1.1.27
The PBX Class as defined in the enumeration above.
OBJECT-TYPE    
  INTEGER hostPbxVoice(1), hostPbxData(2), hostPbxLeasedData(3), hostPbxLeased11(4)  

t1NetworkProfile-LineInterface-DataSense 1.3.6.1.4.1.529.23.127.1.1.28
D-channel normal or inverted data. Currently unused (normal data is always selected.
OBJECT-TYPE    
  INTEGER normal(1), inv(2)  

t1NetworkProfile-LineInterface-IdleMode 1.3.6.1.4.1.529.23.127.1.1.29
D-channel mark or flag idle. Currently unused (flag idle is always selected.
OBJECT-TYPE    
  INTEGER markIdle(1), flagIdle(2)  

t1NetworkProfile-LineInterface-oFDL 1.3.6.1.4.1.529.23.127.1.1.30
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.
OBJECT-TYPE    
  INTEGER none(1), atNT(2), ansi(3), sprint(4)  

t1NetworkProfile-LineInterface-FrontEndType 1.3.6.1.4.1.529.23.127.1.1.31
The front end type (CSU/DSX) of the T1 transceiver.
OBJECT-TYPE    
  INTEGER csu(1), dsx(2)  

t1NetworkProfile-LineInterface-oDSXLineLength 1.3.6.1.4.1.529.23.127.1.1.32
The length of the physical T1 line (for DSX lines).
OBJECT-TYPE    
  INTEGER n-1133(1), n-134266(2), n-267399(3), n-400533(4), n-534655(5)  

t1NetworkProfile-LineInterface-oCSUBuildOut 1.3.6.1.4.1.529.23.127.1.1.33
Line buildout value for CSU lines.
OBJECT-TYPE    
  INTEGER n-0Db(1), n-75Db(2), n-15Db(3), n-2255Db(4)  

t1NetworkProfile-LineInterface-OverlapReceiving 1.3.6.1.4.1.529.23.127.1.1.34
TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-PriPrefixNumber 1.3.6.1.4.1.529.23.127.1.1.35
The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-TrailingDigits 1.3.6.1.4.1.529.23.127.1.1.36
Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-T302Timer 1.3.6.1.4.1.529.23.127.1.1.37
Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Layer3End 1.3.6.1.4.1.529.23.127.1.1.38
If x-side, layer 3 favors outgoing call when a call collision occurs.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfile-LineInterface-Layer2End 1.3.6.1.4.1.529.23.127.1.1.39
This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfile-LineInterface-NlValue 1.3.6.1.4.1.529.23.127.1.1.40
Number of re-transmissions; default to 64.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-LoopAvoidance 1.3.6.1.4.1.529.23.127.1.1.41
Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-MaintenanceState 1.3.6.1.4.1.529.23.127.1.1.42
TRUE if the line is in user-requested maintenance mode, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-NumberComplete 1.3.6.1.4.1.529.23.127.1.1.43
The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out.
OBJECT-TYPE    
  INTEGER n-1Digits(1), n-2Digits(2), n-3Digits(3), n-4Digits(4), n-5Digits(5), n-6Digits(6), n-7Digits(7), n-8Digits(8), n-9Digits(9), n-10Digits(10), endOfPulsing(11), n-0Digits(12), n-11Digits(13), n-12Digits(14), n-13Digits(15), n-14Digits(16), n-15Digits(17), timeOut(18)  

t1NetworkProfile-LineInterface-GroupBAnswerSignal 1.3.6.1.4.1.529.23.127.1.1.44
The group B signal to send prior to answering a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupBBusySignal 1.3.6.1.4.1.529.23.127.1.1.45
The group B signal to send to reject a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupBNoMatchSignal 1.3.6.1.4.1.529.23.127.1.1.46
The group B signal to send to reject a call with invalid call number.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupBCollectSignal 1.3.6.1.4.1.529.23.127.1.1.47
The group B signal to send to answer/reject a collect call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupBNoChargeSignal 1.3.6.1.4.1.529.23.127.1.1.82
The group B signal to send if subscriber line is idle / no charge
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfile-LineInterface-GroupIiSignal 1.3.6.1.4.1.529.23.127.1.1.48
The group II signal to send after sending all address digits.
OBJECT-TYPE    
  INTEGER signalIi1(1), signalIi2(2), signalIi3(3), signalIi4(4), signalIi5(5), signalIi6(6), signalIi7(7), signalIi8(8), signalIi9(9), signalIi10(10), signalIi11(11), signalIi12(12), signalIi13(13), signalIi14(14), signalIi15(15)  

t1NetworkProfile-LineInterface-InputSampleCount 1.3.6.1.4.1.529.23.127.1.1.49
The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection result
OBJECT-TYPE    
  INTEGER oneSample(1), twoSamples(2)  

t1NetworkProfile-LineInterface-AnswerDelay 1.3.6.1.4.1.529.23.127.1.1.50
Number of milliseconds to wait before answering an incoming R2 call.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-CallerId 1.3.6.1.4.1.529.23.127.1.1.51
TRUE if the caller Id is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER noCallerId(1), getCallerId(2)  

t1NetworkProfile-LineInterface-LineSignaling 1.3.6.1.4.1.529.23.127.1.1.52
The line signaling of E1 line.
OBJECT-TYPE    
  INTEGER abBitsLineSignaling(1), aBitOnly0EqualBBit(2), aBitOnly1EqualBBit(3)  

t1NetworkProfile-LineInterface-Timer1CollectCall 1.3.6.1.4.1.529.23.127.1.1.53
Adjustable between 0 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Timer2CollectCall 1.3.6.1.4.1.529.23.127.1.1.54
Adjustable between 10 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-SendDiscVal 1.3.6.1.4.1.529.23.127.1.1.55
Number of seconds before sending ISDN disconnect to switch. 0 means disable.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-HuntGrpPhoneNumber1 1.3.6.1.4.1.529.23.127.1.1.56
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-HuntGrpPhoneNumber2 1.3.6.1.4.1.529.23.127.1.1.57
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-HuntGrpPhoneNumber3 1.3.6.1.4.1.529.23.127.1.1.58
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-PriTypeOfNumber 1.3.6.1.4.1.529.23.127.1.1.59
PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-PriNumberingPlanId 1.3.6.1.4.1.529.23.127.1.1.60
PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-SuperFrameSrcLineNumber 1.3.6.1.4.1.529.23.127.1.1.61
The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-CollectIncomingDigits 1.3.6.1.4.1.529.23.127.1.1.62
TRUE collect incoming called/calling digits, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-T1InterDigitTimeout 1.3.6.1.4.1.529.23.127.1.1.63
Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1UseAnir 1.3.6.1.4.1.529.23.127.1.1.64
TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-R1FirstDigitTimer 1.3.6.1.4.1.529.23.127.1.1.65
The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1AnirDelay 1.3.6.1.4.1.529.23.127.1.1.66
Delay in milliseconds between receiving ST and sending ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1AnirTimer 1.3.6.1.4.1.529.23.127.1.1.67
Time in milliseconds of ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-R1Modified 1.3.6.1.4.1.529.23.127.1.1.68
Use R1 modified signaling. Default is FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-FirstDs0 1.3.6.1.4.1.529.23.127.1.1.69
When using fractional T1/E1 the first DS0 used. Default is 1
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-LastDs0 1.3.6.1.4.1.529.23.127.1.1.70
When using fractional T1/E1 the last DS0 used. Default is 24
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-NailedGroup 1.3.6.1.4.1.529.23.127.1.1.71
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Ss7Continuity-IncomingProcedure 1.3.6.1.4.1.529.23.127.1.1.72
Procedure used for incoming continuity check on this line.
OBJECT-TYPE    
  INTEGER loopback(2), transponder(3)  

t1NetworkProfile-LineInterface-Ss7Continuity-OutgoingProcedure 1.3.6.1.4.1.529.23.127.1.1.73
Procedure used for outgoing continuity check on this line.
OBJECT-TYPE    
  INTEGER singleTone2010(2), send2010Expect1780(3), send1780Expect2010(4), singleTone2000(5), send2000Expect1780(6), send1780Expect2000(7)  

t1NetworkProfile-LineInterface-LineProvision 1.3.6.1.4.1.529.23.127.1.1.74
Line Provision.
OBJECT-TYPE    
  INTEGER lineProvisionNone(1), lineProvisionH0(2), lineProvisionH11(3), lineProvisionH0H11(4), lineProvisionH12(5), lineProvisionH0H12(6), lineProvisionH11H12(7), lineProvisionH0H11H12(8)  

t1NetworkProfile-LineInterface-Gr303Mode 1.3.6.1.4.1.529.23.127.1.1.75
GR-303 Mode.
OBJECT-TYPE    
  INTEGER gr303Disabled(1), gr3035essPri(2), gr303DmsPri(3), gr303Secondary(4), gr303Normal(5)  

t1NetworkProfile-LineInterface-Gr303GroupId 1.3.6.1.4.1.529.23.127.1.1.76
For GR303 lines: the interface group id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-Gr303Ds1Id 1.3.6.1.4.1.529.23.127.1.1.77
For GR303 lines: The logical DS1 id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-SwitchVersion 1.3.6.1.4.1.529.23.127.1.1.78
Switch Version.
OBJECT-TYPE    
  INTEGER switchVersionGeneric(1), switchVersionDefinityG3v4(2)  

t1NetworkProfile-LineInterface-DownTransDelay 1.3.6.1.4.1.529.23.127.1.1.84
To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-UpTransDelay 1.3.6.1.4.1.529.23.127.1.1.85
To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.127.1.1.83
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-LineInterface-CauseCodeVerificationEnable 1.3.6.1.4.1.529.23.127.1.1.88
When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfile-BackToBack 1.3.6.1.4.1.529.23.127.1.1.79
Indicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfile-ChannelUsage 1.3.6.1.4.1.529.23.127.1.1.80
This is the use of the first T1 interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfile-Action-o 1.3.6.1.4.1.529.23.127.1.1.81
Tok_String
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

mibt1NetworkProfile-LineInterface-ChannelConfigTable 1.3.6.1.4.1.529.23.127.2
A list of mibt1NetworkProfile__line_interface__channel_config profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfile-LineInterface-ChannelConfigEntry

mibt1NetworkProfile-LineInterface-ChannelConfigEntry 1.3.6.1.4.1.529.23.127.2.1
A mibt1NetworkProfile__line_interface__channel_config entry containing objects that maps to the parameters of mibt1NetworkProfile__line_interface__channel_config profile.
OBJECT-TYPE    
  Mibt1NetworkProfile-LineInterface-ChannelConfigEntry  

t1NetworkProfile-LineInterface-ChannelConfig-Shelf-o 1.3.6.1.4.1.529.23.127.2.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-Slot-o 1.3.6.1.4.1.529.23.127.2.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-Item-o 1.3.6.1.4.1.529.23.127.2.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-Index-o 1.3.6.1.4.1.529.23.127.2.1.4
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-ChannelUsage 1.3.6.1.4.1.529.23.127.2.1.5
The usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls.
OBJECT-TYPE    
  INTEGER unusedChannel(1), switchedChannel(2), nailed64Channel(3), dChannel(4), nfasPrimaryDChannel(5), nfasSecondaryDChannel(6), semiPermChannel(7), ss7SignalingChannel(8)  

t1NetworkProfile-LineInterface-ChannelConfig-TrunkGroup 1.3.6.1.4.1.529.23.127.2.1.6
The trunk group assigned to this channel.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-PhoneNumber 1.3.6.1.4.1.529.23.127.2.1.7
The phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber 1.3.6.1.4.1.529.23.127.2.1.8
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber 1.3.6.1.4.1.529.23.127.2.1.9
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber 1.3.6.1.4.1.529.23.127.2.1.10
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-NailedGroup 1.3.6.1.4.1.529.23.127.2.1.14
A number that identifies the set of channels that makes up a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-ChanGroup 1.3.6.1.4.1.529.23.127.2.1.15
A number that identifies the channel-group to which this channel belongs.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-DestChanGroup 1.3.6.1.4.1.529.23.127.2.1.16
A number that identifies the channel-group to which any incoming calls on this channel will be directed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-DialPlanNumber 1.3.6.1.4.1.529.23.127.2.1.17
A number that identifies the dial plan from the dial plan menu.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits 1.3.6.1.4.1.529.23.127.2.1.18
The number of leading digits in the incoming phone number to use for selecting the Dial Plan.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfile-LineInterface-ChannelConfig-IdlePattern 1.3.6.1.4.1.529.23.127.2.1.19
The idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)
OBJECT-TYPE    
  INTEGER  

mibt1NetworkProfileV1Table 1.3.6.1.4.1.529.23.126.1
A list of mibt1NetworkProfile_v1 profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileV1Entry

mibt1NetworkProfileV1Entry 1.3.6.1.4.1.529.23.126.1.1
A mibt1NetworkProfile_v1 entry containing objects that maps to the parameters of mibt1NetworkProfile_v1 profile.
OBJECT-TYPE    
  Mibt1NetworkProfileV1Entry  

t1NetworkProfileV1-ProfileNumber 1.3.6.1.4.1.529.23.126.1.1.1
For potential backwards compatibility. The current design consists of one line profile numbered 0.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-Name 1.3.6.1.4.1.529.23.126.1.1.2
Name of DS1 line.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.126.1.1.3
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

t1NetworkProfileV1-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.126.1.1.4
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

t1NetworkProfileV1-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.126.1.1.5
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-BackToBack 1.3.6.1.4.1.529.23.126.1.1.6
Indicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfileV1-PrimaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.7
This is the use of the first T1 interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfileV1-SecondaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.8
The Multiband uses the first T1 interface as the primary interface and treats the secondary interface special. This is the use of the second interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfileV1-TertiaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.9
This is the use of the 3rd T1 interface.
OBJECT-TYPE    
  INTEGER lineUnavailable(1), lineDisable(2), t1LineQuiesce(3), dropAndInsert(4), dualNetworkInterface(5), tOnlineUsrInterface(6), tOnlineZgrInterface(7)  

t1NetworkProfileV1-Action-o 1.3.6.1.4.1.529.23.126.1.1.10
Tok_String
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

mibt1NetworkProfileV1-LineInterfaceTable 1.3.6.1.4.1.529.23.126.2
A list of mibt1NetworkProfile_v1__line_interface profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileV1-LineInterfaceEntry

mibt1NetworkProfileV1-LineInterfaceEntry 1.3.6.1.4.1.529.23.126.2.1
A mibt1NetworkProfile_v1__line_interface entry containing objects that maps to the parameters of mibt1NetworkProfile_v1__line_interface profile.
OBJECT-TYPE    
  Mibt1NetworkProfileV1-LineInterfaceEntry  

t1NetworkProfileV1-LineInterface-Name 1.3.6.1.4.1.529.23.126.2.1.1
Tok_String
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-Index-o 1.3.6.1.4.1.529.23.126.2.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Enabled 1.3.6.1.4.1.529.23.126.2.1.3
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-TOnlineType 1.3.6.1.4.1.529.23.126.2.1.4
The tonline type of an e1 line.
OBJECT-TYPE    
  INTEGER none(1), nt(2), te(3), numberOfTonline(4)  

t1NetworkProfileV1-LineInterface-FrameType 1.3.6.1.4.1.529.23.126.2.1.5
The super-framing mode that is used on the physical link(s).
OBJECT-TYPE    
  INTEGER d4(1), esf(2), g703(3), n-2ds(4)  

t1NetworkProfileV1-LineInterface-Encoding 1.3.6.1.4.1.529.23.126.2.1.6
The layer 1 line encoding used for the physical link(s).
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3), none(4)  

t1NetworkProfileV1-LineInterface-ClockSource 1.3.6.1.4.1.529.23.126.2.1.7
Tok_String
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

t1NetworkProfileV1-LineInterface-ClockPriority 1.3.6.1.4.1.529.23.126.2.1.8
Clock priority assigned to the T1 line. Used to select particular lines as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

t1NetworkProfileV1-LineInterface-SignalingMode 1.3.6.1.4.1.529.23.126.2.1.9
Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling.
OBJECT-TYPE    
  INTEGER inband(1), isdn(2), isdnNfas(3), e1R2Signaling(5), e1KoreanSignaling(6), e1P7Signaling(7), e1ChineseSignaling(8), e1MeteredSignaling(9), e1NoSignaling(10), e1DpnssSignaling(11), e1ArgentinaSignaling(13), e1BrazilSignaling(14), e1PhilippineSignaling(15), e1IndianSignaling(16), e1CzechSignaling(17), e1MalaysiaSignaling(19), e1NewZealandSignaling(20), e1IsraelSignaling(21), e1ThailandSignaling(22), e1KuwaitSignaling(23), e1MexicoSignaling(24), dtmfR2Signaling(25), tunneledPriSignaling(27), inbandFgdInFgdOut(28), inbandFgdInFgcOut(29), inbandFgcInFgcOut(30), inbandFgcInFgdOut(31), e1VietnamSignaling(32), ss7SigTrunk(33), h248DataTrunk(34)  

t1NetworkProfileV1-LineInterface-IsdnEmulationSide 1.3.6.1.4.1.529.23.126.2.1.10
Side the line will emulate: TE (user), or NT (network).
OBJECT-TYPE    
  INTEGER te(1), nt(2)  

t1NetworkProfileV1-LineInterface-RobbedBitMode 1.3.6.1.4.1.529.23.126.2.1.11
Wink start, idle start, incoming wink.
OBJECT-TYPE    
  INTEGER winkStart(1), idleStart(2), incW200(3), incW400(4), loopStart(5), groundStart(6)  

t1NetworkProfileV1-LineInterface-DefaultCallType 1.3.6.1.4.1.529.23.126.2.1.12
Specify the default call-type for incoming calls, for purposes of call routing and signalling.
OBJECT-TYPE    
  INTEGER digital(1), voice(2), dnisOrVoice(3), dnisOrDigital(4), voip(5), dnisOrVoip(6)  

t1NetworkProfileV1-LineInterface-SwitchType 1.3.6.1.4.1.529.23.126.2.1.13
The network switch type, needed for ISDN/NFAS signaling.
OBJECT-TYPE    
  INTEGER attPri(1), ntiPri(2), globandPri(3), japanPri(4), vn3Pri(5), onetr6Pri(6), net5Pri(7), danishPri(8), australPri(9), natIsdn2Pri(10), taiwanPri(31), isdxDpnss(11), islxDpnss(12), mercuryDpnss(13), dass2(14), btSs7(32), unknownBri(15), att5essBri(16), dms100Nt1Bri(17), nisdn1Bri(18), vn2Bri(19), btnr191Bri(20), net3Bri(21), ptpNet3Bri(22), kddBri(23), belgianBri(24), australBri(25), swissBri(26), german1tr6Bri(27), dutch1tr6Bri(28), switchCas(29), idslPtpBri(30)  

t1NetworkProfileV1-LineInterface-NfasGroupId 1.3.6.1.4.1.529.23.126.2.1.14
For NFAS lines: the nfas group id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-NfasId 1.3.6.1.4.1.529.23.126.2.1.15
For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-IncomingCallHandling 1.3.6.1.4.1.529.23.126.2.1.16
This parameter is used to determine the type of processing required for incoming calls from this line.
OBJECT-TYPE    
  INTEGER rejectAll(1), internalProcessing(2), ss7GatewayProcessing(3)  

t1NetworkProfileV1-LineInterface-DeleteDigits 1.3.6.1.4.1.529.23.126.2.1.17
Number of digits to delete from numbers received from a PBX.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-AddDigitString 1.3.6.1.4.1.529.23.126.2.1.18
String of digits to prepend to phone number received from PBX.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-CallByCall 1.3.6.1.4.1.529.23.126.2.1.19
Call-by-call value to set when routing calls from PBX to network.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-NetworkSpecificFacilities 1.3.6.1.4.1.529.23.126.2.1.79
Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-PbxAnswerNumber 1.3.6.1.4.1.529.23.126.2.1.20
The answer number that is the equivalent of a port answer-number used for the network to pbx routing.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-AnswerService 1.3.6.1.4.1.529.23.126.2.1.21
The switched service type (or none) that is used for routing network calls to the pbx.
OBJECT-TYPE    
  INTEGER voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)  

t1NetworkProfileV1-LineInterface-oPBXType 1.3.6.1.4.1.529.23.126.2.1.22
The PBX Class as defined in the enumeration above.
OBJECT-TYPE    
  INTEGER hostPbxVoice(1), hostPbxData(2), hostPbxLeasedData(3), hostPbxLeased11(4)  

t1NetworkProfileV1-LineInterface-DataSense 1.3.6.1.4.1.529.23.126.2.1.23
D-channel normal or inverted data. Currently unused (normal data is always selected.
OBJECT-TYPE    
  INTEGER normal(1), inv(2)  

t1NetworkProfileV1-LineInterface-IdleMode 1.3.6.1.4.1.529.23.126.2.1.24
D-channel mark or flag idle. Currently unused (flag idle is always selected.
OBJECT-TYPE    
  INTEGER markIdle(1), flagIdle(2)  

t1NetworkProfileV1-LineInterface-oFDL 1.3.6.1.4.1.529.23.126.2.1.25
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.
OBJECT-TYPE    
  INTEGER none(1), atNT(2), ansi(3), sprint(4)  

t1NetworkProfileV1-LineInterface-FrontEndType 1.3.6.1.4.1.529.23.126.2.1.26
The front end type (CSU/DSX) of the T1 transceiver.
OBJECT-TYPE    
  INTEGER csu(1), dsx(2)  

t1NetworkProfileV1-LineInterface-oDSXLineLength 1.3.6.1.4.1.529.23.126.2.1.27
The length of the physical T1 line (for DSX lines).
OBJECT-TYPE    
  INTEGER n-1133(1), n-134266(2), n-267399(3), n-400533(4), n-534655(5)  

t1NetworkProfileV1-LineInterface-oCSUBuildOut 1.3.6.1.4.1.529.23.126.2.1.28
Line buildout value for CSU lines.
OBJECT-TYPE    
  INTEGER n-0Db(1), n-75Db(2), n-15Db(3), n-2255Db(4)  

t1NetworkProfileV1-LineInterface-OverlapReceiving 1.3.6.1.4.1.529.23.126.2.1.29
TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-PriPrefixNumber 1.3.6.1.4.1.529.23.126.2.1.30
The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-TrailingDigits 1.3.6.1.4.1.529.23.126.2.1.31
Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-T302Timer 1.3.6.1.4.1.529.23.126.2.1.32
Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Layer3End 1.3.6.1.4.1.529.23.126.2.1.33
If x-side, layer 3 favors outgoing call when a call collision occurs.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfileV1-LineInterface-Layer2End 1.3.6.1.4.1.529.23.126.2.1.34
This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

t1NetworkProfileV1-LineInterface-NlValue 1.3.6.1.4.1.529.23.126.2.1.35
Number of re-transmissions; default to 64.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-LoopAvoidance 1.3.6.1.4.1.529.23.126.2.1.36
Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-MaintenanceState 1.3.6.1.4.1.529.23.126.2.1.37
TRUE if the line is in user-requested maintenance mode, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-NumberComplete 1.3.6.1.4.1.529.23.126.2.1.38
The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out.
OBJECT-TYPE    
  INTEGER n-1Digits(1), n-2Digits(2), n-3Digits(3), n-4Digits(4), n-5Digits(5), n-6Digits(6), n-7Digits(7), n-8Digits(8), n-9Digits(9), n-10Digits(10), endOfPulsing(11), n-0Digits(12), n-11Digits(13), n-12Digits(14), n-13Digits(15), n-14Digits(16), n-15Digits(17), timeOut(18)  

t1NetworkProfileV1-LineInterface-GroupBAnswerSignal 1.3.6.1.4.1.529.23.126.2.1.39
The group B signal to send prior to answering a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupBBusySignal 1.3.6.1.4.1.529.23.126.2.1.40
The group B signal to send to reject a call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupBNoMatchSignal 1.3.6.1.4.1.529.23.126.2.1.41
The group B signal to send to reject a call with invalid call number.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupBCollectSignal 1.3.6.1.4.1.529.23.126.2.1.42
The group B signal to send to answer/reject a collect call.
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupBNoChargeSignal 1.3.6.1.4.1.529.23.126.2.1.74
The group B signal to send if subscriber line is idle / no charge
OBJECT-TYPE    
  INTEGER signalB1(1), signalB2(2), signalB3(3), signalB4(4), signalB5(5), signalB6(6), signalB7(7), signalB8(8), signalB9(9), signalB10(10), signalB11(11), signalB12(12), signalB13(13), signalB14(14), signalB15(15)  

t1NetworkProfileV1-LineInterface-GroupIiSignal 1.3.6.1.4.1.529.23.126.2.1.43
The group II signal to send after sending all address digits.
OBJECT-TYPE    
  INTEGER signalIi1(1), signalIi2(2), signalIi3(3), signalIi4(4), signalIi5(5), signalIi6(6), signalIi7(7), signalIi8(8), signalIi9(9), signalIi10(10), signalIi11(11), signalIi12(12), signalIi13(13), signalIi14(14), signalIi15(15)  

t1NetworkProfileV1-LineInterface-InputSampleCount 1.3.6.1.4.1.529.23.126.2.1.44
The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection result
OBJECT-TYPE    
  INTEGER oneSample(1), twoSamples(2)  

t1NetworkProfileV1-LineInterface-AnswerDelay 1.3.6.1.4.1.529.23.126.2.1.45
Number of milliseconds to wait before answering an incoming R2 call.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-CallerId 1.3.6.1.4.1.529.23.126.2.1.46
TRUE if the caller Id is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER noCallerId(1), getCallerId(2)  

t1NetworkProfileV1-LineInterface-LineSignaling 1.3.6.1.4.1.529.23.126.2.1.47
The line signaling of E1 line.
OBJECT-TYPE    
  INTEGER abBitsLineSignaling(1), aBitOnly0EqualBBit(2), aBitOnly1EqualBBit(3)  

t1NetworkProfileV1-LineInterface-Timer1CollectCall 1.3.6.1.4.1.529.23.126.2.1.48
Adjustable between 0 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Timer2CollectCall 1.3.6.1.4.1.529.23.126.2.1.49
Adjustable between 10 ~ 2000ms
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-SendDiscVal 1.3.6.1.4.1.529.23.126.2.1.50
Number of seconds before sending ISDN disconnect to switch. 0 means disable.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber1 1.3.6.1.4.1.529.23.126.2.1.51
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber2 1.3.6.1.4.1.529.23.126.2.1.52
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber3 1.3.6.1.4.1.529.23.126.2.1.53
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-PriTypeOfNumber 1.3.6.1.4.1.529.23.126.2.1.54
PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-PriNumberingPlanId 1.3.6.1.4.1.529.23.126.2.1.55
PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-SuperFrameSrcLineNumber 1.3.6.1.4.1.529.23.126.2.1.56
The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-CollectIncomingDigits 1.3.6.1.4.1.529.23.126.2.1.57
TRUE collect incoming called/calling digits, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-T1InterDigitTimeout 1.3.6.1.4.1.529.23.126.2.1.58
Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1UseAnir 1.3.6.1.4.1.529.23.126.2.1.59
TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-R1FirstDigitTimer 1.3.6.1.4.1.529.23.126.2.1.60
The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1AnirDelay 1.3.6.1.4.1.529.23.126.2.1.61
Delay in milliseconds between receiving ST and sending ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1AnirTimer 1.3.6.1.4.1.529.23.126.2.1.62
Time in milliseconds of ANIR signal.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-R1Modified 1.3.6.1.4.1.529.23.126.2.1.63
Use R1 modified signaling. Default is FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-FirstDs0 1.3.6.1.4.1.529.23.126.2.1.64
When using fractional T1/E1 the first DS0 used. Default is 1
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-LastDs0 1.3.6.1.4.1.529.23.126.2.1.65
When using fractional T1/E1 the last DS0 used. Default is 24
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-NailedGroup 1.3.6.1.4.1.529.23.126.2.1.66
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Ss7Continuity-IncomingProcedure 1.3.6.1.4.1.529.23.126.2.1.67
Procedure used for incoming continuity check on this line.
OBJECT-TYPE    
  INTEGER loopback(2), transponder(3)  

t1NetworkProfileV1-LineInterface-Ss7Continuity-OutgoingProcedure 1.3.6.1.4.1.529.23.126.2.1.68
Procedure used for outgoing continuity check on this line.
OBJECT-TYPE    
  INTEGER singleTone2010(2), send2010Expect1780(3), send1780Expect2010(4), singleTone2000(5), send2000Expect1780(6), send1780Expect2000(7)  

t1NetworkProfileV1-LineInterface-LineProvision 1.3.6.1.4.1.529.23.126.2.1.69
Line Provision.
OBJECT-TYPE    
  INTEGER lineProvisionNone(1), lineProvisionH0(2), lineProvisionH11(3), lineProvisionH0H11(4), lineProvisionH12(5), lineProvisionH0H12(6), lineProvisionH11H12(7), lineProvisionH0H11H12(8)  

t1NetworkProfileV1-LineInterface-Gr303Mode 1.3.6.1.4.1.529.23.126.2.1.70
GR-303 Mode.
OBJECT-TYPE    
  INTEGER gr303Disabled(1), gr3035essPri(2), gr303DmsPri(3), gr303Secondary(4), gr303Normal(5)  

t1NetworkProfileV1-LineInterface-Gr303GroupId 1.3.6.1.4.1.529.23.126.2.1.71
For GR303 lines: the interface group id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-Gr303Ds1Id 1.3.6.1.4.1.529.23.126.2.1.72
For GR303 lines: The logical DS1 id.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-SwitchVersion 1.3.6.1.4.1.529.23.126.2.1.73
Switch Version.
OBJECT-TYPE    
  INTEGER switchVersionGeneric(1), switchVersionDefinityG3v4(2)  

t1NetworkProfileV1-LineInterface-DownTransDelay 1.3.6.1.4.1.529.23.126.2.1.76
To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-UpTransDelay 1.3.6.1.4.1.529.23.126.2.1.77
To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.126.2.1.75
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

t1NetworkProfileV1-LineInterface-CauseCodeVerificationEnable 1.3.6.1.4.1.529.23.126.2.1.80
When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

mibt1NetworkProfileV1-LineInterface-ChannelConfigTable 1.3.6.1.4.1.529.23.126.3
A list of mibt1NetworkProfile_v1__line_interface__channel_config profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry

mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry 1.3.6.1.4.1.529.23.126.3.1
A mibt1NetworkProfile_v1__line_interface__channel_config entry containing objects that maps to the parameters of mibt1NetworkProfile_v1__line_interface__channel_config profile.
OBJECT-TYPE    
  Mibt1NetworkProfileV1-LineInterface-ChannelConfigEntry  

t1NetworkProfileV1-LineInterface-ChannelConfig-Name 1.3.6.1.4.1.529.23.126.3.1.1
Tok_String
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-ChannelConfig-Index-o 1.3.6.1.4.1.529.23.126.3.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-Index1-o 1.3.6.1.4.1.529.23.126.3.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-ChannelUsage 1.3.6.1.4.1.529.23.126.3.1.4
The usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls.
OBJECT-TYPE    
  INTEGER unusedChannel(1), switchedChannel(2), nailed64Channel(3), dChannel(4), nfasPrimaryDChannel(5), nfasSecondaryDChannel(6), semiPermChannel(7), ss7SignalingChannel(8)  

t1NetworkProfileV1-LineInterface-ChannelConfig-TrunkGroup 1.3.6.1.4.1.529.23.126.3.1.5
The trunk group assigned to this channel.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-PhoneNumber 1.3.6.1.4.1.529.23.126.3.1.6
The phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.
OBJECT-TYPE    
  DisplayString  

t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-SlotNumber 1.3.6.1.4.1.529.23.126.3.1.7
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-SlotNumber-ShelfNumber 1.3.6.1.4.1.529.23.126.3.1.8
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-RoutePort-RelativePortNumber-RelativePortNumber 1.3.6.1.4.1.529.23.126.3.1.9
Tok_String
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-NailedGroup 1.3.6.1.4.1.529.23.126.3.1.13
A number that identifies the set of channels that makes up a nailed group.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-ChanGroup 1.3.6.1.4.1.529.23.126.3.1.14
A number that identifies the channel-group to which this channel belongs.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-DestChanGroup 1.3.6.1.4.1.529.23.126.3.1.15
A number that identifies the channel-group to which any incoming calls on this channel will be directed.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-DialPlanNumber 1.3.6.1.4.1.529.23.126.3.1.16
A number that identifies the dial plan from the dial plan menu.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-NumberOfDialPlanSelectDigits 1.3.6.1.4.1.529.23.126.3.1.17
The number of leading digits in the incoming phone number to use for selecting the Dial Plan.
OBJECT-TYPE    
  INTEGER  

t1NetworkProfileV1-LineInterface-ChannelConfig-IdlePattern 1.3.6.1.4.1.529.23.126.3.1.18
The idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)
OBJECT-TYPE    
  INTEGER