ASCEND-MIBSHDSLSTAT-MIB

File: ASCEND-MIBSHDSLSTAT-MIB.mib (18399 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

MibshdslDslLineStatusEntry  
SEQUENCE    
  shdslDslLineStatus-Shelf-o INTEGER
  shdslDslLineStatus-Slot-o INTEGER
  shdslDslLineStatus-Item-o INTEGER
  shdslDslLineStatus-PhysicalAddress-Shelf INTEGER
  shdslDslLineStatus-PhysicalAddress-Slot INTEGER
  shdslDslLineStatus-PhysicalAddress-ItemNumber INTEGER
  shdslDslLineStatus-LineState INTEGER
  shdslDslLineStatus-SparePhysicalAddress-Shelf INTEGER
  shdslDslLineStatus-SparePhysicalAddress-Slot INTEGER
  shdslDslLineStatus-SparePhysicalAddress-ItemNumber INTEGER
  shdslDslLineStatus-SparingState INTEGER
  shdslDslLineStatus-SparingChangeReason INTEGER
  shdslDslLineStatus-SparingChangeTime INTEGER
  shdslDslLineStatus-SparingChangeCounter INTEGER
  shdslDslLineStatus-VpiVciRange INTEGER
  shdslDslLineStatus-VpSwitchingVpi INTEGER
  shdslDslLineStatus-PhysicalStatus-IfGroupIndex INTEGER
  shdslDslLineStatus-PhysicalStatus-UnitType INTEGER
  shdslDslLineStatus-PhysicalStatus-InterfaceType INTEGER
  shdslDslLineStatus-PhysicalStatus-DevLineState INTEGER
  shdslDslLineStatus-PhysicalStatus-OperationalRate INTEGER
  shdslDslLineStatus-PhysicalStatus-FirmwareVer DisplayString
  shdslDslLineStatus-PhysicalStatus-HardwareVer INTEGER
  shdslDslLineStatus-PhysicalStatus-NetworkType INTEGER
  shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Days INTEGER
  shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Hours INTEGER
  shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Minutes INTEGER
  shdslDslLineStatus-PhysicalStatistic-RxSignalPresent INTEGER
  shdslDslLineStatus-PhysicalStatistic-LineQuality INTEGER
  shdslDslLineStatus-PhysicalStatistic-UpDwnCntr INTEGER
  shdslDslLineStatus-PhysicalStatistic-SelfTest INTEGER
  shdslDslLineStatus-PhysicalStatistic-TransmitPower INTEGER
  shdslDslLineStatus-PhysicalStatistic-FramerSyncStatus INTEGER
  shdslDslLineStatus-PhysicalStatistic-CodeViolations INTEGER
  shdslDslLineStatus-PhysicalStatistic-ErroredSecond INTEGER
  shdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecond INTEGER
  shdslDslLineStatus-PhysicalStatistic-LoswSecond INTEGER
  shdslDslLineStatus-PhysicalStatistic-UnavailableSecond INTEGER
  shdslDslLineStatus-PhysicalStatistic-LoopAttenuation INTEGER
  shdslDslLineStatus-PhysicalStatistic-Snr INTEGER
  shdslDslLineStatus-PhysicalStatistic-SturLoopAttenuation INTEGER
  shdslDslLineStatus-PhysicalStatistic-SturSnr INTEGER
  shdslDslLineStatus-Action-o INTEGER

Defined Values

mibshdslDslLineStatus 1.3.6.1.4.1.529.23.157
OBJECT IDENTIFIER    

mibshdslDslLineStatusTable 1.3.6.1.4.1.529.23.157.1
A list of mibshdslDslLineStatus profile entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MibshdslDslLineStatusEntry

mibshdslDslLineStatusEntry 1.3.6.1.4.1.529.23.157.1.1
A mibshdslDslLineStatus entry containing objects that maps to the parameters of mibshdslDslLineStatus profile.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MibshdslDslLineStatusEntry  

shdslDslLineStatus-Shelf-o 1.3.6.1.4.1.529.23.157.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-Slot-o 1.3.6.1.4.1.529.23.157.1.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-Item-o 1.3.6.1.4.1.529.23.157.1.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.157.1.1.4
The number of the shelf that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

shdslDslLineStatus-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.157.1.1.5
The number of the slot that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

shdslDslLineStatus-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.157.1.1.6
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-LineState 1.3.6.1.4.1.529.23.157.1.1.7
The overall state of the line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER doesNotExist(1), disabled(2), active(3)  

shdslDslLineStatus-SparePhysicalAddress-Shelf 1.3.6.1.4.1.529.23.157.1.1.8
The number of the shelf that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

shdslDslLineStatus-SparePhysicalAddress-Slot 1.3.6.1.4.1.529.23.157.1.1.9
The number of the slot that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

shdslDslLineStatus-SparePhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.157.1.1.10
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-SparingState 1.3.6.1.4.1.529.23.157.1.1.11
The sparing state of the line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sparingNone(1), primaryActive(2), primaryInactive(3), secondaryActive(4), secondaryInactive(5)  

shdslDslLineStatus-SparingChangeReason 1.3.6.1.4.1.529.23.157.1.1.12
The reson for the last sparing state change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), manual(2), automatic(3), test(4)  

shdslDslLineStatus-SparingChangeTime 1.3.6.1.4.1.529.23.157.1.1.13
The time of the last sparing state change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-SparingChangeCounter 1.3.6.1.4.1.529.23.157.1.1.14
The number of sparing state changes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-VpiVciRange 1.3.6.1.4.1.529.23.157.1.1.15
The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vpi01Vci321023(6), vpi03Vci32511(1), vpi07Vci32255(2), vpi015Vci32127(3), vpi031Vci3263(4), notApplicable(5)  

shdslDslLineStatus-VpSwitchingVpi 1.3.6.1.4.1.529.23.157.1.1.16
VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-IfGroupIndex 1.3.6.1.4.1.529.23.157.1.1.17
Interface groups index assigned to this physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-UnitType 1.3.6.1.4.1.529.23.157.1.1.18
Unit types defines if the node is operating Central Office or Customer Premise equipment software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER coe(1), cpe(2)  

shdslDslLineStatus-PhysicalStatus-InterfaceType 1.3.6.1.4.1.529.23.157.1.1.19
Interface type defines if the node is operating on SHDSL or GSHDSL
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER default(1), gShdsl(2), hdsl2(3)  

shdslDslLineStatus-PhysicalStatus-DevLineState 1.3.6.1.4.1.529.23.157.1.1.20
Display of current interface state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER portUp(2), test(3), startupHandshake(4), startupTraining(5), startupDownload(6), idle(7), down(8), outOfService(9), unknown(10), analogLoopback(11), digitalLoopback(12)  

shdslDslLineStatus-PhysicalStatus-OperationalRate 1.3.6.1.4.1.529.23.157.1.1.21
Operational up and down stream rate. Zero means unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-FirmwareVer 1.3.6.1.4.1.529.23.157.1.1.22
Firmware version ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

shdslDslLineStatus-PhysicalStatus-HardwareVer 1.3.6.1.4.1.529.23.157.1.1.23
Hardware chip version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatus-NetworkType 1.3.6.1.4.1.529.23.157.1.1.43
Current Standard Network type. Either Annex A, Annex B or Annex B ANFP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Days 1.3.6.1.4.1.529.23.157.1.1.24
Number of days that the DSL line has been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Hours 1.3.6.1.4.1.529.23.157.1.1.25
Number of hours that the DSL line has been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Minutes 1.3.6.1.4.1.529.23.157.1.1.26
Number of minutes that the DSL line has been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-RxSignalPresent 1.3.6.1.4.1.529.23.157.1.1.27
State if the receive signal is present or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(3), no(2)  

shdslDslLineStatus-PhysicalStatistic-LineQuality 1.3.6.1.4.1.529.23.157.1.1.28
While the port is in the up state, this parameter displays the line quality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-UpDwnCntr 1.3.6.1.4.1.529.23.157.1.1.29
Interface Up Down counter value displays the number of times the interface trasitions from a down to up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SelfTest 1.3.6.1.4.1.529.23.157.1.1.30
Hardware/firmware self test results.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER passed(1), selfTestFailed(2), localLoopBackFailed(3)  

shdslDslLineStatus-PhysicalStatistic-TransmitPower 1.3.6.1.4.1.529.23.157.1.1.31
Transmit power in DB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-FramerSyncStatus 1.3.6.1.4.1.529.23.157.1.1.32
Framer sync status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inSync(2), outOfSync(1)  

shdslDslLineStatus-PhysicalStatistic-CodeViolations 1.3.6.1.4.1.529.23.157.1.1.33
Line is defined as a count of SHDSL CRC anomalies occuring during the accumuation period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-ErroredSecond 1.3.6.1.4.1.529.23.157.1.1.34
Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecond 1.3.6.1.4.1.529.23.157.1.1.35
Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LoswSecond 1.3.6.1.4.1.529.23.157.1.1.36
Line is defined as a count of 1 second intervals during which one or more SHDSL LOSW defects are declared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-UnavailableSecond 1.3.6.1.4.1.529.23.157.1.1.37
Line is a count of 1 second intervals for which the SHDSL line is unavailable. The SHDSL line becomes unavailable at the onset of 10 contiguous SES-L's. Once unavailable the SHDSL line becomes available at the onset of 10 contiguous seconds with no SES-L's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-LoopAttenuation 1.3.6.1.4.1.529.23.157.1.1.38
Current loop attenuation in DB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-Snr 1.3.6.1.4.1.529.23.157.1.1.40
While the port is in the up state, this parameter displays the Signal to Noise Ratio.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SturLoopAttenuation 1.3.6.1.4.1.529.23.157.1.1.41
Current loop attenuation in DB from the STU-R.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-PhysicalStatistic-SturSnr 1.3.6.1.4.1.529.23.157.1.1.42
While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

shdslDslLineStatus-Action-o 1.3.6.1.4.1.529.23.157.1.1.39
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor