ASCEND-MIBOC3ATMNET-MIB

File: ASCEND-MIBOC3ATMNET-MIB.mib (26893 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Miboc3AtmNetworkProfileEntry  
SEQUENCE    
  oc3AtmNetworkProfile-Shelf-o INTEGER
  oc3AtmNetworkProfile-Slot-o INTEGER
  oc3AtmNetworkProfile-Item-o INTEGER
  oc3AtmNetworkProfile-Name DisplayString
  oc3AtmNetworkProfile-PhysicalAddress-Shelf INTEGER
  oc3AtmNetworkProfile-PhysicalAddress-Slot INTEGER
  oc3AtmNetworkProfile-PhysicalAddress-ItemNumber INTEGER
  oc3AtmNetworkProfile-Enabled INTEGER
  oc3AtmNetworkProfile-SparePhysicalAddress-Shelf INTEGER
  oc3AtmNetworkProfile-SparePhysicalAddress-Slot INTEGER
  oc3AtmNetworkProfile-SparePhysicalAddress-ItemNumber INTEGER
  oc3AtmNetworkProfile-SparingMode INTEGER
  oc3AtmNetworkProfile-ProfileNumber INTEGER
  oc3AtmNetworkProfile-IgnoreLineup INTEGER
  oc3AtmNetworkProfile-ApsConfigName DisplayString
  oc3AtmNetworkProfile-LineConfig-TrunkGroup INTEGER
  oc3AtmNetworkProfile-LineConfig-NailedGroup INTEGER
  oc3AtmNetworkProfile-LineConfig-Loopback INTEGER
  oc3AtmNetworkProfile-LineConfig-FramerMode INTEGER
  oc3AtmNetworkProfile-LineConfig-FramerRate INTEGER
  oc3AtmNetworkProfile-LineConfig-RxDescrambleDisabled INTEGER
  oc3AtmNetworkProfile-LineConfig-TxScrambleDisabled INTEGER
  oc3AtmNetworkProfile-LineConfig-RxCellPayloadDescrambleDisabled INTEGER
  oc3AtmNetworkProfile-LineConfig-TxCellPayloadScrambleDisabled INTEGER
  oc3AtmNetworkProfile-LineConfig-LoopTiming INTEGER
  oc3AtmNetworkProfile-LineConfig-VpiVciRange INTEGER
  oc3AtmNetworkProfile-LineConfig-ClockSource INTEGER
  oc3AtmNetworkProfile-LineConfig-ClockPriority INTEGER
  oc3AtmNetworkProfile-Action-o INTEGER

Miboc3AtmNetworkProfile-LineConfig-IncomingVCCsEntry  
SEQUENCE    
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-o INTEGER
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-o INTEGER
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-o INTEGER
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-o INTEGER
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Enabled INTEGER
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Vpi INTEGER
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVci INTEGER
  oc3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVci INTEGER

Miboc3AtmNetworkProfile-LineConfig-TrafficShapersEntry  
SEQUENCE    
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-o INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-o INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-Item-o INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-Index-o INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-Enabled INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-BitRate INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRate INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSize INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-Aggregate INTEGER
  oc3AtmNetworkProfile-LineConfig-TrafficShapers-Priority INTEGER

Miboc3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry  
SEQUENCE    
  oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-o INTEGER
  oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-o INTEGER
  oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-o INTEGER
  oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-o INTEGER
  oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi INTEGER

Defined Values

miboc3AtmNetworkProfile 1.3.6.1.4.1.529.23.11
OBJECT IDENTIFIER    

miboc3AtmNetworkProfileTable 1.3.6.1.4.1.529.23.11.1
A list of miboc3AtmNetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Miboc3AtmNetworkProfileEntry

miboc3AtmNetworkProfileEntry 1.3.6.1.4.1.529.23.11.1.1
A miboc3AtmNetworkProfile entry containing objects that maps to the parameters of miboc3AtmNetworkProfile profile.
OBJECT-TYPE    
  Miboc3AtmNetworkProfileEntry  

oc3AtmNetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.11.1.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-Slot-o 1.3.6.1.4.1.529.23.11.1.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-Item-o 1.3.6.1.4.1.529.23.11.1.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-Name 1.3.6.1.4.1.529.23.11.1.1.4
For future use. The current design does not use the name field but instead references Oc3Atm lines by the physical address; we may in the future support referencing Oc3Atm lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Oc3Atm line physical address.
OBJECT-TYPE    
  DisplayString  

oc3AtmNetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.11.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

oc3AtmNetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.11.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

oc3AtmNetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.11.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-Enabled 1.3.6.1.4.1.529.23.11.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-SparePhysicalAddress-Shelf 1.3.6.1.4.1.529.23.11.1.1.9
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

oc3AtmNetworkProfile-SparePhysicalAddress-Slot 1.3.6.1.4.1.529.23.11.1.1.10
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

oc3AtmNetworkProfile-SparePhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.11.1.1.11
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-SparingMode 1.3.6.1.4.1.529.23.11.1.1.12
Trunk port sparing operational mode for this port.
OBJECT-TYPE    
  INTEGER inactive(1), manual(2), automatic(3)  

oc3AtmNetworkProfile-ProfileNumber 1.3.6.1.4.1.529.23.11.1.1.13
For potential backwards compatibility. The current design consists of one line profile numbered 0.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-IgnoreLineup 1.3.6.1.4.1.529.23.11.1.1.31
Ignore line up value for this port.
OBJECT-TYPE    
  INTEGER systemDefined(1), no(2), yes(3)  

oc3AtmNetworkProfile-ApsConfigName 1.3.6.1.4.1.529.23.11.1.1.32
APS Config Profile name, specifies APS configuration profile that defines a protection group for this channel.
OBJECT-TYPE    
  DisplayString  

oc3AtmNetworkProfile-LineConfig-TrunkGroup 1.3.6.1.4.1.529.23.11.1.1.14
The trunk group to which this line is assigned. 0 means this line is not part of a trunk group.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-NailedGroup 1.3.6.1.4.1.529.23.11.1.1.15
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-Loopback 1.3.6.1.4.1.529.23.11.1.1.19
Loopback mode.
OBJECT-TYPE    
  INTEGER noLoopback(1), facilityLoopback(2), localLoopback(3), atmLayerLoopback(4)  

oc3AtmNetworkProfile-LineConfig-FramerMode 1.3.6.1.4.1.529.23.11.1.1.30
The Sonet Framer mode.
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

oc3AtmNetworkProfile-LineConfig-FramerRate 1.3.6.1.4.1.529.23.11.1.1.20
The OC3 ATM framer rate.
OBJECT-TYPE    
  INTEGER sTS3c(1), sTS1(2)  

oc3AtmNetworkProfile-LineConfig-RxDescrambleDisabled 1.3.6.1.4.1.529.23.11.1.1.21
TRUE if the RX side descrambling is disabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-TxScrambleDisabled 1.3.6.1.4.1.529.23.11.1.1.22
TRUE if the TX side scrambling is disabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-RxCellPayloadDescrambleDisabled 1.3.6.1.4.1.529.23.11.1.1.23
TRUE if the RX side cell payload descrambling is disabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-TxCellPayloadScrambleDisabled 1.3.6.1.4.1.529.23.11.1.1.24
TRUE if the TX side cell payload scrambling is disabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-LoopTiming 1.3.6.1.4.1.529.23.11.1.1.25
TRUE if the TX timing is derived from the receiver inputs. FALSE if the TX timing is derived from reference clock.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-VpiVciRange 1.3.6.1.4.1.529.23.11.1.1.26
The OC3 ATM valid VPI/VCI value range.
OBJECT-TYPE    
  INTEGER n-01-3232767(1), n-03-3216383(2), n-07-328191(3), n-015-324095(4), n-031-322047(5), n-063-321023(6), n-0127-32511(7), n-0255-32255(8), vpi0255Vci32255(9), vpi0255Vci32511(10), vpi0255Vci321023(11), vpi0255Vci322047(12), vpi0255Vci324095(13), vpi0255Vci328191(14), vpi0255Vci3216383(15)  

oc3AtmNetworkProfile-LineConfig-ClockSource 1.3.6.1.4.1.529.23.11.1.1.27
Determine whether the 8KHz clock from the OC3-ATM board is eligible to be used as the system-wide TDM clock source.
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

oc3AtmNetworkProfile-LineConfig-ClockPriority 1.3.6.1.4.1.529.23.11.1.1.28
Clock priority assigned to the OC3-ATM line. Used to select a particular OC3 line as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

oc3AtmNetworkProfile-Action-o 1.3.6.1.4.1.529.23.11.1.1.29
Tok_String
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

miboc3AtmNetworkProfile-LineConfig-IncomingVCCsTable 1.3.6.1.4.1.529.23.11.2
A list of miboc3AtmNetworkProfile__line_config__incomingVCCs profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Miboc3AtmNetworkProfile-LineConfig-IncomingVCCsEntry

miboc3AtmNetworkProfile-LineConfig-IncomingVCCsEntry 1.3.6.1.4.1.529.23.11.2.1
A miboc3AtmNetworkProfile__line_config__incomingVCCs entry containing objects that maps to the parameters of miboc3AtmNetworkProfile__line_config__incomingVCCs profile.
OBJECT-TYPE    
  Miboc3AtmNetworkProfile-LineConfig-IncomingVCCsEntry  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-o 1.3.6.1.4.1.529.23.11.2.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-o 1.3.6.1.4.1.529.23.11.2.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-o 1.3.6.1.4.1.529.23.11.2.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-o 1.3.6.1.4.1.529.23.11.2.1.4
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Enabled 1.3.6.1.4.1.529.23.11.2.1.5
TRUE if the item is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-Vpi 1.3.6.1.4.1.529.23.11.2.1.6
A number that identifies the Virtual Path Identifier of this item.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVci 1.3.6.1.4.1.529.23.11.2.1.7
A number that identifies the starting Virtual Channel Identifier of this item.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVci 1.3.6.1.4.1.529.23.11.2.1.8
A number that identifies the ending Virtual Channel Identifier of this item.
OBJECT-TYPE    
  INTEGER  

miboc3AtmNetworkProfile-LineConfig-TrafficShapersTable 1.3.6.1.4.1.529.23.11.3
A list of miboc3AtmNetworkProfile__line_config__traffic_shapers profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Miboc3AtmNetworkProfile-LineConfig-TrafficShapersEntry

miboc3AtmNetworkProfile-LineConfig-TrafficShapersEntry 1.3.6.1.4.1.529.23.11.3.1
A miboc3AtmNetworkProfile__line_config__traffic_shapers entry containing objects that maps to the parameters of miboc3AtmNetworkProfile__line_config__traffic_shapers profile.
OBJECT-TYPE    
  Miboc3AtmNetworkProfile-LineConfig-TrafficShapersEntry  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-o 1.3.6.1.4.1.529.23.11.3.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-o 1.3.6.1.4.1.529.23.11.3.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-Item-o 1.3.6.1.4.1.529.23.11.3.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-Index-o 1.3.6.1.4.1.529.23.11.3.1.4
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-Enabled 1.3.6.1.4.1.529.23.11.3.1.5
TRUE if the shaper is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-BitRate 1.3.6.1.4.1.529.23.11.3.1.6
What is the sustained rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRate 1.3.6.1.4.1.529.23.11.3.1.7
What is the peak rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSize 1.3.6.1.4.1.529.23.11.3.1.8
What is the maximum burst size in cell that can be transmitted during the peak rate by the VC(s) when using this shaper.
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-Aggregate 1.3.6.1.4.1.529.23.11.3.1.9
If FALSE each individual VC gets the bit rate that is assigned to this shaper. If TRUE the VCs share the bit rate that is assigned to this shaper equally.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oc3AtmNetworkProfile-LineConfig-TrafficShapers-Priority 1.3.6.1.4.1.529.23.11.3.1.10
A number that represent the prioriy of the shaper in respect to other shapers. 0 is the highest priority and 15 is the lowest.
OBJECT-TYPE    
  INTEGER  

miboc3AtmNetworkProfile-LineConfig-VcSwitchingVpiTable 1.3.6.1.4.1.529.23.11.4
A list of miboc3AtmNetworkProfile__line_config__vc_switching_vpi profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Miboc3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry

miboc3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry 1.3.6.1.4.1.529.23.11.4.1
A miboc3AtmNetworkProfile__line_config__vc_switching_vpi entry containing objects that maps to the parameters of miboc3AtmNetworkProfile__line_config__vc_switching_vpi profile.
OBJECT-TYPE    
  Miboc3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry  

oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-o 1.3.6.1.4.1.529.23.11.4.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-o 1.3.6.1.4.1.529.23.11.4.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-o 1.3.6.1.4.1.529.23.11.4.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-o 1.3.6.1.4.1.529.23.11.4.1.4
Tok_String
OBJECT-TYPE    
  INTEGER  

oc3AtmNetworkProfile-LineConfig-VcSwitchingVpi 1.3.6.1.4.1.529.23.11.4.1.5
VPI(s) to be used for the VC switching (VCC). It should always contain VPI 0 for VC switching. All VC switching VPI have similar valid VCI range which is determined by 'vpi-vci-range' attribute. Rest of the VPIs will be used for the VP switching. The user needs to understand that adding a VPI in a list of VC switching VPI will allocate more VCCs for this port. The user needs to make sure that VCCs for the other ports have been reduced to accommodate increase in VCC for this port because system can support only 32k VCCs on all trunk ports combined. If vci-range is 4k and VPI 0 is the only VPI doing VC switching for this port than this port occupies 4k VCCs. If user adds VPI 1 to the list of VPIs to do VCC then total 8k VCCs are occupied for this port. System will reject the configuration if user tries to use more than 32k VCCs for all trunk ports combined. ANY CHANGES IN A LIST OF VPIs WILL BE EFFECTIVE IMMEDIATLY. IN ORDER TO DO THAT ALL CONNECTIONS WITHIN THIS SYSTEM WILL BE DROPPED AND REESTABLISHED.
OBJECT-TYPE    
  INTEGER