ASCEND-MIBLOADSELECT-MIB

File: ASCEND-MIBLOADSELECT-MIB.mib (25079 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

MibloadSelectProfileEntry  
SEQUENCE    
  loadSelectProfile-Index-o INTEGER
  loadSelectProfile-UnknownCards INTEGER
  loadSelectProfile-Sr INTEGER
  loadSelectProfile-Sr2 INTEGER
  loadSelectProfile-Apxsr INTEGER
  loadSelectProfile-o8t1 INTEGER
  loadSelectProfile-o8e1 INTEGER
  loadSelectProfile-T3 INTEGER
  loadSelectProfile-Stm0 INTEGER
  loadSelectProfile-Pctfit INTEGER
  loadSelectProfile-Pctfie INTEGER
  loadSelectProfile-Clpmt INTEGER
  loadSelectProfile-Clpme INTEGER
  loadSelectProfile-o24t1 INTEGER
  loadSelectProfile-o24e1 INTEGER
  loadSelectProfile-Cln INTEGER
  loadSelectProfile-Alpmt INTEGER
  loadSelectProfile-Alpme INTEGER
  loadSelectProfile-Ut1 INTEGER
  loadSelectProfile-Ue1 INTEGER
  loadSelectProfile-Uds3 INTEGER
  loadSelectProfile-Ds3Atm INTEGER
  loadSelectProfile-AtmHse INTEGER
  loadSelectProfile-Enet2 INTEGER
  loadSelectProfile-Enet3 INTEGER
  loadSelectProfile-Enet3nd INTEGER
  loadSelectProfile-EtherDual INTEGER
  loadSelectProfile-SrsEther INTEGER
  loadSelectProfile-EnetHse INTEGER
  loadSelectProfile-Apxenet INTEGER
  loadSelectProfile-MdmV34 INTEGER
  loadSelectProfile-Mdm56k INTEGER
  loadSelectProfile-Amdm INTEGER
  loadSelectProfile-Anmdm INTEGER
  loadSelectProfile-Csmx INTEGER
  loadSelectProfile-Madd INTEGER
  loadSelectProfile-Csm3v INTEGER
  loadSelectProfile-Madd3 INTEGER
  loadSelectProfile-Hdlc2 INTEGER
  loadSelectProfile-Hdlc2ec INTEGER
  loadSelectProfile-Swan INTEGER
  loadSelectProfile-Hssi INTEGER
  loadSelectProfile-Idsl INTEGER
  loadSelectProfile-Capadsl INTEGER
  loadSelectProfile-Dmtadsl INTEGER
  loadSelectProfile-Sdsl INTEGER
  loadSelectProfile-Sdsl70d INTEGER
  loadSelectProfile-Sdsl70v INTEGER
  loadSelectProfile-Oc3Atm INTEGER
  loadSelectProfile-SdslAtm INTEGER
  loadSelectProfile-AlDmtadslAtm INTEGER
  loadSelectProfile-SdslAtmV2 INTEGER
  loadSelectProfile-DadslAtm24 INTEGER
  loadSelectProfile-GliteAtm48 INTEGER
  loadSelectProfile-Hdsl2 INTEGER
  loadSelectProfile-AnnexbDmtadsl INTEGER
  loadSelectProfile-T1000 INTEGER
  loadSelectProfile-Ima INTEGER
  loadSelectProfile-Stngr32Idsl INTEGER
  loadSelectProfile-o40DmtAdsl INTEGER
  loadSelectProfile-o48DmtAdsl INTEGER
  loadSelectProfile-o72Shdsl INTEGER
  loadSelectProfile-o72CtDmtAdsl INTEGER
  loadSelectProfile-o32DmtAslam INTEGER
  loadSelectProfile-Vdsl INTEGER
  loadSelectProfile-Ds3Atm2 INTEGER
  loadSelectProfile-E3Atm INTEGER
  loadSelectProfile-Oc3Atm2 INTEGER
  loadSelectProfile-Vpn INTEGER
  loadSelectProfile-Swan2 INTEGER
  loadSelectProfile-Action-o INTEGER

Defined Values

mibloadSelectProfile 1.3.6.1.4.1.529.23.92
OBJECT IDENTIFIER    

mibloadSelectProfileTable 1.3.6.1.4.1.529.23.92.1
A list of mibloadSelectProfile profile entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MibloadSelectProfileEntry

mibloadSelectProfileEntry 1.3.6.1.4.1.529.23.92.1.1
A mibloadSelectProfile entry containing objects that maps to the parameters of mibloadSelectProfile profile.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MibloadSelectProfileEntry  

loadSelectProfile-Index-o 1.3.6.1.4.1.529.23.92.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

loadSelectProfile-UnknownCards 1.3.6.1.4.1.529.23.92.1.1.2
Controls whether code images for card models which the current software load doesn't know of should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Sr 1.3.6.1.4.1.529.23.92.1.1.3
Controls whether code images for the SHELF-CONTROLER card should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Sr2 1.3.6.1.4.1.529.23.92.1.1.4
Controls whether code images for the SHELF-CONTROLER-2 card should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Apxsr 1.3.6.1.4.1.529.23.92.1.1.5
Controls whether code images for the APX-SHELF-CONTROLER card should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o8t1 1.3.6.1.4.1.529.23.92.1.1.6
Controls whether code images for T1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o8e1 1.3.6.1.4.1.529.23.92.1.1.7
Controls whether code images for E1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-T3 1.3.6.1.4.1.529.23.92.1.1.8
Controls whether code images for T3 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Stm0 1.3.6.1.4.1.529.23.92.1.1.9
Controls whether code images for STM-0 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Pctfit 1.3.6.1.4.1.529.23.92.1.1.10
Controls whether code images for PCTFI T1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Pctfie 1.3.6.1.4.1.529.23.92.1.1.11
Controls whether code images for PCTFI E1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Clpmt 1.3.6.1.4.1.529.23.92.1.1.12
Controls whether code images for APX CLPM for T1 should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Clpme 1.3.6.1.4.1.529.23.92.1.1.13
Controls whether code images for the APX CLPM for E1 should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o24t1 1.3.6.1.4.1.529.23.92.1.1.64
Controls whether code images for 24 port T1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o24e1 1.3.6.1.4.1.529.23.92.1.1.65
Controls whether code images for 24 port E1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Cln 1.3.6.1.4.1.529.23.92.1.1.72
Controls whether code images for APX 1K Channelized line type cards should be stored in Flash. cln include 2ds3 and 3ds3 cards.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Alpmt 1.3.6.1.4.1.529.23.92.1.1.75
Controls whether code images for the APX ALPM for T1 should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Alpme 1.3.6.1.4.1.529.23.92.1.1.76
Controls whether code images for the APX ALPM for E1 should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Ut1 1.3.6.1.4.1.529.23.92.1.1.14
Controls whether code images for UT1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Ue1 1.3.6.1.4.1.529.23.92.1.1.15
Controls whether code images for UE1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Uds3 1.3.6.1.4.1.529.23.92.1.1.16
Controls whether code images for UDS3 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Ds3Atm 1.3.6.1.4.1.529.23.92.1.1.17
Controls whether code images for DS3-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-AtmHse 1.3.6.1.4.1.529.23.92.1.1.68
Controls whether code images for ATM HSE cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Enet2 1.3.6.1.4.1.529.23.92.1.1.19
Controls whether code images for ETHERNET2 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Enet3 1.3.6.1.4.1.529.23.92.1.1.20
Controls whether code images for ETHERNET3 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Enet3nd 1.3.6.1.4.1.529.23.92.1.1.21
Controls whether code images for ETHERNET3ND cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-EtherDual 1.3.6.1.4.1.529.23.92.1.1.22
Controls whether code images for DUAL 10/100 ETHERNET cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-SrsEther 1.3.6.1.4.1.529.23.92.1.1.23
Controls whether code images for SRS ETHERNET cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-EnetHse 1.3.6.1.4.1.529.23.92.1.1.69
Controls whether code images for HS ETHERNET card should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Apxenet 1.3.6.1.4.1.529.23.92.1.1.82
Controls whether code images for APXENET card should be stored in flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-MdmV34 1.3.6.1.4.1.529.23.92.1.1.24
Controls whether code images for MODEM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Mdm56k 1.3.6.1.4.1.529.23.92.1.1.25
Controls whether code images for OBSOLETE MODEM-56K cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Amdm 1.3.6.1.4.1.529.23.92.1.1.26
Controls whether code images for OBSOLETE ANALOG MODEM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Anmdm 1.3.6.1.4.1.529.23.92.1.1.27
Controls whether code images for OBSOLETE analog modem cards should be stored in Flash. Replaced by amdm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Csmx 1.3.6.1.4.1.529.23.92.1.1.28
Controls whether code images for CSMX cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Madd 1.3.6.1.4.1.529.23.92.1.1.29
Controls whether code images for MADD cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Csm3v 1.3.6.1.4.1.529.23.92.1.1.30
Controls whether code images for CSM3V cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Madd3 1.3.6.1.4.1.529.23.92.1.1.31
Controls whether code images for MADD3 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Hdlc2 1.3.6.1.4.1.529.23.92.1.1.33
Controls whether code images for HDLC2 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Hdlc2ec 1.3.6.1.4.1.529.23.92.1.1.34
Controls whether code images for HDLC2EC cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Swan 1.3.6.1.4.1.529.23.92.1.1.35
Controls whether code images for SWAN cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Hssi 1.3.6.1.4.1.529.23.92.1.1.36
Controls whether code images for HSSI cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Idsl 1.3.6.1.4.1.529.23.92.1.1.37
Controls whether code images for IDSL cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Capadsl 1.3.6.1.4.1.529.23.92.1.1.38
Controls whether code images for CAP-ADSL cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Dmtadsl 1.3.6.1.4.1.529.23.92.1.1.39
Controls whether code images for DMT-ADSL cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Sdsl 1.3.6.1.4.1.529.23.92.1.1.40
Controls whether code images for SDSL cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Sdsl70d 1.3.6.1.4.1.529.23.92.1.1.41
Controls whether code images for SDSL70D cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Sdsl70v 1.3.6.1.4.1.529.23.92.1.1.42
Controls whether code images for SDSL70V cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Oc3Atm 1.3.6.1.4.1.529.23.92.1.1.43
Controls whether code images for OC3-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-SdslAtm 1.3.6.1.4.1.529.23.92.1.1.44
Controls whether code images for SDSL-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-AlDmtadslAtm 1.3.6.1.4.1.529.23.92.1.1.45
Controls whether code images for DMT-ADSL-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-SdslAtmV2 1.3.6.1.4.1.529.23.92.1.1.46
Controls whether code images for SDSL-ATM-V2 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-DadslAtm24 1.3.6.1.4.1.529.23.92.1.1.47
Controls whether code images for 24 port DMT-ADSL-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-GliteAtm48 1.3.6.1.4.1.529.23.92.1.1.48
Controls whether code images for 48 port GLITE-DMT-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Hdsl2 1.3.6.1.4.1.529.23.92.1.1.49
Controls whether code images for 32 port HDSL2 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-AnnexbDmtadsl 1.3.6.1.4.1.529.23.92.1.1.50
Controls whether code images for 12 port ANNEX B DMT-ADSL-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-T1000 1.3.6.1.4.1.529.23.92.1.1.51
Controls whether code images for STNGR_T1000 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Ima 1.3.6.1.4.1.529.23.92.1.1.52
Controls whether code images for 24-port/8-port IMA_T1/IMA_E1 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Stngr32Idsl 1.3.6.1.4.1.529.23.92.1.1.53
Controls whether code images for STINGER 32 port IDSL cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o40DmtAdsl 1.3.6.1.4.1.529.23.92.1.1.54
Controls whether code images for 40 port Annex A/C DMT-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o48DmtAdsl 1.3.6.1.4.1.529.23.92.1.1.55
Controls whether code images for 48 port Annex A/B/C DMT-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o72Shdsl 1.3.6.1.4.1.529.23.92.1.1.62
Controls whether code images for 72 port SHDSL cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o72CtDmtAdsl 1.3.6.1.4.1.529.23.92.1.1.77
Controls whether code images for 72 port CT DMT-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-o32DmtAslam 1.3.6.1.4.1.529.23.92.1.1.70
Controls whether code images for 32 port ASLAM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Vdsl 1.3.6.1.4.1.529.23.92.1.1.71
Controls whether code images for 24 port VDSL cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Ds3Atm2 1.3.6.1.4.1.529.23.92.1.1.56
Controls whether code images for DS3-ATM2 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-E3Atm 1.3.6.1.4.1.529.23.92.1.1.57
Controls whether code images for E3-ATM cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Oc3Atm2 1.3.6.1.4.1.529.23.92.1.1.58
Controls whether code images for OC3-ATM2 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Vpn 1.3.6.1.4.1.529.23.92.1.1.59
Controls whether code images for VPN cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Swan2 1.3.6.1.4.1.529.23.92.1.1.60
Controls whether code images for SWAN version 2 cards should be stored in Flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), load(2), skip(3)  

loadSelectProfile-Action-o 1.3.6.1.4.1.529.23.92.1.1.61
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)