ASCEND-MIBINET-MIB

File: ASCEND-MIBINET-MIB.mib (144252 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

MibinternetProfileEntry  
SEQUENCE    
  internetProfile-Station DisplayString
  internetProfile-Active INTEGER
  internetProfile-EncapsulationProtocol INTEGER
  internetProfile-CalledNumberType INTEGER
  internetProfile-DialNumber DisplayString
  internetProfile-SubAddress DisplayString
  internetProfile-Clid DisplayString
  internetProfile-AutoProfiles INTEGER
  internetProfile-IpOptions-IpRoutingEnabled INTEGER
  internetProfile-IpOptions-VjHeaderPrediction INTEGER
  internetProfile-IpOptions-RemoteAddress IpAddress
  internetProfile-IpOptions-NetmaskRemote IpAddress
  internetProfile-IpOptions-LocalAddress IpAddress
  internetProfile-IpOptions-NetmaskLocal IpAddress
  internetProfile-IpOptions-RoutingMetric INTEGER
  internetProfile-IpOptions-Preference INTEGER
  internetProfile-IpOptions-DownPreference INTEGER
  internetProfile-IpOptions-PrivateRoute INTEGER
  internetProfile-IpOptions-MulticastAllowed INTEGER
  internetProfile-IpOptions-AddressPool INTEGER
  internetProfile-IpOptions-IpDirect IpAddress
  internetProfile-IpOptions-Rip INTEGER
  internetProfile-IpOptions-RouteFilter DisplayString
  internetProfile-IpOptions-SourceIpCheck INTEGER
  internetProfile-IpOptions-OspfOptions-Active INTEGER
  internetProfile-IpOptions-OspfOptions-Area IpAddress
  internetProfile-IpOptions-OspfOptions-AreaType INTEGER
  internetProfile-IpOptions-OspfOptions-HelloInterval INTEGER
  internetProfile-IpOptions-OspfOptions-DeadInterval INTEGER
  internetProfile-IpOptions-OspfOptions-Priority INTEGER
  internetProfile-IpOptions-OspfOptions-AuthenType INTEGER
  internetProfile-IpOptions-OspfOptions-AuthKey DisplayString
  internetProfile-IpOptions-OspfOptions-KeyId INTEGER
  internetProfile-IpOptions-OspfOptions-Cost INTEGER
  internetProfile-IpOptions-OspfOptions-DownCost INTEGER
  internetProfile-IpOptions-OspfOptions-AseType INTEGER
  internetProfile-IpOptions-OspfOptions-AseTag DisplayString
  internetProfile-IpOptions-OspfOptions-TransitDelay INTEGER
  internetProfile-IpOptions-OspfOptions-RetransmitInterval INTEGER
  internetProfile-IpOptions-OspfOptions-NonMulticast INTEGER
  internetProfile-IpOptions-OspfOptions-NetworkType INTEGER
  internetProfile-IpOptions-OspfOptions-PollInterval INTEGER
  internetProfile-IpOptions-OspfOptions-Md5AuthKey DisplayString
  internetProfile-IpOptions-MulticastRateLimit INTEGER
  internetProfile-IpOptions-MulticastGroupLeaveDelay INTEGER
  internetProfile-IpOptions-ClientDnsPrimaryAddr IpAddress
  internetProfile-IpOptions-ClientDnsSecondaryAddr IpAddress
  internetProfile-IpOptions-ClientDnsAddrAssign INTEGER
  internetProfile-IpOptions-ClientDefaultGateway IpAddress
  internetProfile-IpOptions-TosOptions-Active INTEGER
  internetProfile-IpOptions-TosOptions-Precedence INTEGER
  internetProfile-IpOptions-TosOptions-TypeOfService INTEGER
  internetProfile-IpOptions-TosOptions-ApplyTo INTEGER
  internetProfile-IpOptions-TosOptions-MarkingType INTEGER
  internetProfile-IpOptions-TosOptions-Dscp DisplayString
  internetProfile-IpOptions-TosFilter DisplayString
  internetProfile-IpOptions-ClientWinsPrimaryAddr IpAddress
  internetProfile-IpOptions-ClientWinsSecondaryAddr IpAddress
  internetProfile-IpOptions-ClientWinsAddrAssign INTEGER
  internetProfile-IpOptions-PrivateRouteTable DisplayString
  internetProfile-IpOptions-PrivateRouteProfileRequired INTEGER
  internetProfile-IpOptions-NatProfileName DisplayString
  internetProfile-IpOptions-AddressRealm INTEGER
  internetProfile-IpxOptions-IpxRoutingEnabled INTEGER
  internetProfile-IpxOptions-PeerMode INTEGER
  internetProfile-IpxOptions-Rip INTEGER
  internetProfile-IpxOptions-Sap INTEGER
  internetProfile-IpxOptions-DialQuery INTEGER
  internetProfile-IpxOptions-NetNumber DisplayString
  internetProfile-IpxOptions-NetAlias DisplayString
  internetProfile-IpxOptions-SapFilter DisplayString
  internetProfile-IpxOptions-IpxSpoofing INTEGER
  internetProfile-IpxOptions-SpoofingTimeout INTEGER
  internetProfile-IpxOptions-IpxSapHsProxy INTEGER
  internetProfile-IpxOptions-IpxHeaderCompression INTEGER
  internetProfile-BridgingOptions-BridgingGroup INTEGER
  internetProfile-BridgingOptions-DialOnBroadcast INTEGER
  internetProfile-BridgingOptions-IpxSpoofing INTEGER
  internetProfile-BridgingOptions-SpoofingTimeout INTEGER
  internetProfile-BridgingOptions-Fill2 INTEGER
  internetProfile-BridgingOptions-BridgeType INTEGER
  internetProfile-BridgingOptions-Egress INTEGER
  internetProfile-SessionOptions-CallFilter DisplayString
  internetProfile-SessionOptions-DataFilter DisplayString
  internetProfile-SessionOptions-FilterPersistence INTEGER
  internetProfile-SessionOptions-FilterRequired INTEGER
  internetProfile-SessionOptions-IdleTimer INTEGER
  internetProfile-SessionOptions-TsIdleMode INTEGER
  internetProfile-SessionOptions-TsIdleTimer INTEGER
  internetProfile-SessionOptions-Backup DisplayString
  internetProfile-SessionOptions-Secondary DisplayString
  internetProfile-SessionOptions-MaxCallDuration INTEGER
  internetProfile-SessionOptions-VtpGateway INTEGER
  internetProfile-SessionOptions-Blockcountlimit INTEGER
  internetProfile-SessionOptions-Blockduration INTEGER
  internetProfile-SessionOptions-MaxVtpTunnels INTEGER
  internetProfile-SessionOptions-RedialDelayLimit INTEGER
  internetProfile-SessionOptions-SesRateType INTEGER
  internetProfile-SessionOptions-SesRateMode INTEGER
  internetProfile-SessionOptions-SesAdslCapUpRate INTEGER
  internetProfile-SessionOptions-SesAdslCapDownRate INTEGER
  internetProfile-SessionOptions-SesSdslRate INTEGER
  internetProfile-SessionOptions-SesAdslDmtUpRate INTEGER
  internetProfile-SessionOptions-SesAdslDmtDownRate INTEGER
  internetProfile-SessionOptions-RxDataRateLimit INTEGER
  internetProfile-SessionOptions-TxDataRateLimit INTEGER
  internetProfile-SessionOptions-CirTimer INTEGER
  internetProfile-SessionOptions-TrafficShaper INTEGER
  internetProfile-SessionOptions-MaxtapLogServer DisplayString
  internetProfile-SessionOptions-MaxtapDataServer DisplayString
  internetProfile-SessionOptions-Priority INTEGER
  internetProfile-TelcoOptions-AnswerOriginate INTEGER
  internetProfile-TelcoOptions-Callback INTEGER
  internetProfile-TelcoOptions-CallType INTEGER
  internetProfile-TelcoOptions-NailedGroups DisplayString
  internetProfile-TelcoOptions-Ft1Caller INTEGER
  internetProfile-TelcoOptions-Force56kbps INTEGER
  internetProfile-TelcoOptions-DataService INTEGER
  internetProfile-TelcoOptions-CallByCall INTEGER
  internetProfile-TelcoOptions-BillingNumber DisplayString
  internetProfile-TelcoOptions-TransitNumber DisplayString
  internetProfile-TelcoOptions-ExpectCallback INTEGER
  internetProfile-TelcoOptions-DialoutAllowed INTEGER
  internetProfile-TelcoOptions-DelayCallback INTEGER
  internetProfile-TelcoOptions-NasPortType INTEGER
  internetProfile-PppOptions-SendAuthMode INTEGER
  internetProfile-PppOptions-PppCircuit INTEGER
  internetProfile-PppOptions-PppCircuitName DisplayString
  internetProfile-PppOptions-BiDirectionalAuth INTEGER
  internetProfile-PppOptions-SendPassword DisplayString
  internetProfile-PppOptions-SubstituteSendName DisplayString
  internetProfile-PppOptions-RecvPassword DisplayString
  internetProfile-PppOptions-SubstituteRecvName DisplayString
  internetProfile-PppOptions-LinkCompression INTEGER
  internetProfile-PppOptions-Mru INTEGER
  internetProfile-PppOptions-Lqm INTEGER
  internetProfile-PppOptions-LqmMinimumPeriod INTEGER
  internetProfile-PppOptions-LqmMaximumPeriod INTEGER
  internetProfile-PppOptions-CbcpEnabled INTEGER
  internetProfile-PppOptions-ModeCallbackControl INTEGER
  internetProfile-PppOptions-DelayCallbackControl INTEGER
  internetProfile-PppOptions-TrunkGroupCallbackControl INTEGER
  internetProfile-PppOptions-SplitCodeDotUserEnabled INTEGER
  internetProfile-PppOptions-PppInterfaceType INTEGER
  internetProfile-PppOptions-Mtu INTEGER
  internetProfile-MpOptions-BaseChannelCount INTEGER
  internetProfile-MpOptions-MinimumChannels INTEGER
  internetProfile-MpOptions-MaximumChannels INTEGER
  internetProfile-MpOptions-BacpEnable INTEGER
  internetProfile-MpOptions-BodEnable INTEGER
  internetProfile-MpOptions-CallbackrequestEnable INTEGER
  internetProfile-MppOptions-AuxSendPassword DisplayString
  internetProfile-MppOptions-DynamicAlgorithm INTEGER
  internetProfile-MppOptions-BandwidthMonitorDirection INTEGER
  internetProfile-MppOptions-IncrementChannelCount INTEGER
  internetProfile-MppOptions-DecrementChannelCount INTEGER
  internetProfile-MppOptions-SecondsHistory INTEGER
  internetProfile-MppOptions-AddPersistence INTEGER
  internetProfile-MppOptions-SubPersistence INTEGER
  internetProfile-MppOptions-TargetUtilization INTEGER
  internetProfile-MppOptions-X25chanTargetUtilization INTEGER
  internetProfile-FrOptions-FrameRelayProfile DisplayString
  internetProfile-FrOptions-CircuitType INTEGER
  internetProfile-FrOptions-Dlci INTEGER
  internetProfile-FrOptions-CircuitName DisplayString
  internetProfile-FrOptions-FrLinkType INTEGER
  internetProfile-FrOptions-FrDirectEnabled INTEGER
  internetProfile-FrOptions-FrDirectProfile DisplayString
  internetProfile-FrOptions-FrDirectDlci INTEGER
  internetProfile-FrOptions-MfrBundleName DisplayString
  internetProfile-TcpClearOptions-Host DisplayString
  internetProfile-TcpClearOptions-Port INTEGER
  internetProfile-TcpClearOptions-Host2 DisplayString
  internetProfile-TcpClearOptions-Port2 INTEGER
  internetProfile-TcpClearOptions-Host3 DisplayString
  internetProfile-TcpClearOptions-Port3 INTEGER
  internetProfile-TcpClearOptions-Host4 DisplayString
  internetProfile-TcpClearOptions-Port4 INTEGER
  internetProfile-TcpClearOptions-DetectEndOfPacket INTEGER
  internetProfile-TcpClearOptions-EndOfPacketPattern DisplayString
  internetProfile-TcpClearOptions-FlushLength INTEGER
  internetProfile-TcpClearOptions-FlushTime INTEGER
  internetProfile-AraOptions-RecvPassword DisplayString
  internetProfile-AraOptions-MaximumConnectTime INTEGER
  internetProfile-X25Options-X25Profile DisplayString
  internetProfile-X25Options-Lcn INTEGER
  internetProfile-X25Options-X3Profile INTEGER
  internetProfile-X25Options-MaxCalls INTEGER
  internetProfile-X25Options-VcTimerEnable INTEGER
  internetProfile-X25Options-X25EncapsType INTEGER
  internetProfile-X25Options-RemoteX25Address DisplayString
  internetProfile-X25Options-ReverseCharge INTEGER
  internetProfile-X25Options-CallMode INTEGER
  internetProfile-X25Options-AnswerX25Address DisplayString
  internetProfile-X25Options-InactivityTimer INTEGER
  internetProfile-X25Options-Windowsize INTEGER
  internetProfile-X25Options-Packetsize INTEGER
  internetProfile-X25Options-X25Rpoa DisplayString
  internetProfile-X25Options-X25CugIndex DisplayString
  internetProfile-X25Options-X25Nui DisplayString
  internetProfile-X25Options-PadBanner DisplayString
  internetProfile-X25Options-PadPrompt DisplayString
  internetProfile-X25Options-PadNuiPrompt DisplayString
  internetProfile-X25Options-PadNuiPwPrompt DisplayString
  internetProfile-X25Options-PadAlias1 DisplayString
  internetProfile-X25Options-PadAlias2 DisplayString
  internetProfile-X25Options-PadAlias3 DisplayString
  internetProfile-X25Options-PadDiagDisp INTEGER
  internetProfile-X25Options-PadDefaultListen DisplayString
  internetProfile-X25Options-PadDefaultPw DisplayString
  internetProfile-X25Options-X121SourceAddress DisplayString
  internetProfile-X25Options-PosAuth INTEGER
  internetProfile-EuOptions-DceAddr INTEGER
  internetProfile-EuOptions-DteAddr INTEGER
  internetProfile-EuOptions-Mru INTEGER
  internetProfile-X75Options-KFramesOutstanding INTEGER
  internetProfile-X75Options-N2Retransmissions INTEGER
  internetProfile-X75Options-T1RetranTimer INTEGER
  internetProfile-X75Options-FrameLength INTEGER
  internetProfile-AppletalkOptions-AtalkRoutingEnabled INTEGER
  internetProfile-AppletalkOptions-AtalkStaticZoneName DisplayString
  internetProfile-AppletalkOptions-AtalkStaticNetStart INTEGER
  internetProfile-AppletalkOptions-AtalkStaticNetEnd INTEGER
  internetProfile-AppletalkOptions-AtalkPeerMode INTEGER
  internetProfile-UsrRadOptions-AcctType INTEGER
  internetProfile-UsrRadOptions-AcctHost IpAddress
  internetProfile-UsrRadOptions-AcctPort INTEGER
  internetProfile-UsrRadOptions-AcctKey DisplayString
  internetProfile-UsrRadOptions-AcctTimeout INTEGER
  internetProfile-UsrRadOptions-AcctIdBase INTEGER
  internetProfile-CalledNumber DisplayString
  internetProfile-DhcpOptions-ReplyEnabled INTEGER
  internetProfile-DhcpOptions-PoolNumber INTEGER
  internetProfile-DhcpOptions-MaximumLeases INTEGER
  internetProfile-SharedProf INTEGER
  internetProfile-MaxSharedUsers INTEGER
  internetProfile-T3posOptions-X25Profile DisplayString
  internetProfile-T3posOptions-MaxCalls INTEGER
  internetProfile-T3posOptions-AutoCallX121Address DisplayString
  internetProfile-T3posOptions-ReverseCharge INTEGER
  internetProfile-T3posOptions-Answer DisplayString
  internetProfile-T3posOptions-T3PosHostInitMode INTEGER
  internetProfile-T3posOptions-T3PosDteInitMode INTEGER
  internetProfile-T3posOptions-T3PosEnqHandling INTEGER
  internetProfile-T3posOptions-T3PosMaxBlockSize INTEGER
  internetProfile-T3posOptions-T3PosT1 INTEGER
  internetProfile-T3posOptions-T3PosT2 INTEGER
  internetProfile-T3posOptions-T3PosT3 INTEGER
  internetProfile-T3posOptions-T3PosT4 INTEGER
  internetProfile-T3posOptions-T3PosT5 INTEGER
  internetProfile-T3posOptions-T3PosT6 INTEGER
  internetProfile-T3posOptions-T3PosMethodOfHostNotif INTEGER
  internetProfile-T3posOptions-T3PosPidSelection INTEGER
  internetProfile-T3posOptions-T3PosAckSuppression INTEGER
  internetProfile-T3posOptions-X25Rpoa DisplayString
  internetProfile-T3posOptions-X25CugIndex DisplayString
  internetProfile-T3posOptions-X25Nui DisplayString
  internetProfile-T3posOptions-DataFormat INTEGER
  internetProfile-T3posOptions-LinkAccessType INTEGER
  internetProfile-FramedOnly INTEGER
  internetProfile-AltdialNumber1 DisplayString
  internetProfile-AltdialNumber2 DisplayString
  internetProfile-AltdialNumber3 DisplayString
  internetProfile-X32Options-X32Profile DisplayString
  internetProfile-X32Options-CallMode INTEGER
  internetProfile-X32Options-X32ApplMode INTEGER
  internetProfile-TunnelOptions-ProfileType INTEGER
  internetProfile-TunnelOptions-TunnelingProtocol INTEGER
  internetProfile-TunnelOptions-MaxTunnels INTEGER
  internetProfile-TunnelOptions-AtmpHaRip INTEGER
  internetProfile-TunnelOptions-PrimaryTunnelServer DisplayString
  internetProfile-TunnelOptions-SecondaryTunnelServer DisplayString
  internetProfile-TunnelOptions-UdpPort INTEGER
  internetProfile-TunnelOptions-Password DisplayString
  internetProfile-TunnelOptions-HomeNetworkName DisplayString
  internetProfile-TunnelOptions-ClientAuthId DisplayString
  internetProfile-TunnelOptions-ServerAuthId DisplayString
  internetProfile-TunnelOptions-Vrouter DisplayString
  internetProfile-TunnelOptions-AssignmentId DisplayString
  internetProfile-TunnelOptions-TosCopying INTEGER
  internetProfile-IpsecOptions-Enabled INTEGER
  internetProfile-IpsecOptions-SecurityPolicyDatabase DisplayString
  internetProfile-PriNumberingPlanId INTEGER
  internetProfile-Vrouter DisplayString
  internetProfile-CrossConnectIndex INTEGER
  internetProfile-AtmOptions-Atm1483type INTEGER
  internetProfile-AtmOptions-Vpi INTEGER
  internetProfile-AtmOptions-Vci INTEGER
  internetProfile-AtmOptions-NailedGroup INTEGER
  internetProfile-AtmOptions-CastType INTEGER
  internetProfile-AtmOptions-ConnKind INTEGER
  internetProfile-AtmOptions-AtmServiceType INTEGER
  internetProfile-AtmOptions-AtmServiceRate INTEGER
  internetProfile-AtmOptions-VpSwitching INTEGER
  internetProfile-AtmOptions-TargetAtmAddress DisplayString
  internetProfile-AtmOptions-TargetSelect INTEGER
  internetProfile-AtmOptions-TargetVpi INTEGER
  internetProfile-AtmOptions-TargetVci INTEGER
  internetProfile-AtmOptions-SpvcRetryInterval INTEGER
  internetProfile-AtmOptions-SpvcRetryThreshold INTEGER
  internetProfile-AtmOptions-SpvcRetryLimit INTEGER
  internetProfile-AtmOptions-AtmDirectEnabled INTEGER
  internetProfile-AtmOptions-AtmDirectProfile DisplayString
  internetProfile-AtmOptions-VcFaultManagement INTEGER
  internetProfile-AtmOptions-VcMaxLoopbackCellLoss INTEGER
  internetProfile-AtmOptions-SvcOptions-Enabled INTEGER
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-NumberingPlan INTEGER
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress DisplayString
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format INTEGER
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi DisplayString
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi DisplayString
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp DisplayString
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi DisplayString
  internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel DisplayString
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan INTEGER
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress DisplayString
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format INTEGER
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi DisplayString
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi DisplayString
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp DisplayString
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi DisplayString
  internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel DisplayString
  internetProfile-AtmOptions-AtmInverseArp INTEGER
  internetProfile-AtmOptions-Fr08Mode INTEGER
  internetProfile-AtmOptions-AtmCircuitProfile DisplayString
  internetProfile-AtmOptions-OamAisF5 INTEGER
  internetProfile-AtmOptions-OamSupport INTEGER
  internetProfile-AtmOptions-Mtu INTEGER
  internetProfile-HdlcNrmOptions-SnrmResponseTimeout INTEGER
  internetProfile-HdlcNrmOptions-SnrmRetryCounter INTEGER
  internetProfile-HdlcNrmOptions-PollTimeout INTEGER
  internetProfile-HdlcNrmOptions-PollRate INTEGER
  internetProfile-HdlcNrmOptions-PollRetryCount INTEGER
  internetProfile-HdlcNrmOptions-Primary INTEGER
  internetProfile-HdlcNrmOptions-AsyncDrop INTEGER
  internetProfile-HdlcNrmOptions-StationPollAddress INTEGER
  internetProfile-AtmConnectOptions-Atm1483type INTEGER
  internetProfile-AtmConnectOptions-Vpi INTEGER
  internetProfile-AtmConnectOptions-Vci INTEGER
  internetProfile-AtmConnectOptions-NailedGroup INTEGER
  internetProfile-AtmConnectOptions-CastType INTEGER
  internetProfile-AtmConnectOptions-ConnKind INTEGER
  internetProfile-AtmConnectOptions-AtmServiceType INTEGER
  internetProfile-AtmConnectOptions-AtmServiceRate INTEGER
  internetProfile-AtmConnectOptions-VpSwitching INTEGER
  internetProfile-AtmConnectOptions-TargetAtmAddress DisplayString
  internetProfile-AtmConnectOptions-TargetSelect INTEGER
  internetProfile-AtmConnectOptions-TargetVpi INTEGER
  internetProfile-AtmConnectOptions-TargetVci INTEGER
  internetProfile-AtmConnectOptions-SpvcRetryInterval INTEGER
  internetProfile-AtmConnectOptions-SpvcRetryThreshold INTEGER
  internetProfile-AtmConnectOptions-SpvcRetryLimit INTEGER
  internetProfile-AtmConnectOptions-AtmDirectEnabled INTEGER
  internetProfile-AtmConnectOptions-AtmDirectProfile DisplayString
  internetProfile-AtmConnectOptions-VcFaultManagement INTEGER
  internetProfile-AtmConnectOptions-VcMaxLoopbackCellLoss INTEGER
  internetProfile-AtmConnectOptions-SvcOptions-Enabled INTEGER
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-NumberingPlan INTEGER
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format INTEGER
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan INTEGER
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format INTEGER
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi DisplayString
  internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel DisplayString
  internetProfile-AtmConnectOptions-AtmInverseArp INTEGER
  internetProfile-AtmConnectOptions-Fr08Mode INTEGER
  internetProfile-AtmConnectOptions-AtmCircuitProfile DisplayString
  internetProfile-AtmConnectOptions-OamAisF5 INTEGER
  internetProfile-AtmConnectOptions-OamSupport INTEGER
  internetProfile-AtmConnectOptions-Mtu INTEGER
  internetProfile-Visa2Options-IdleCharacterDelay INTEGER
  internetProfile-Visa2Options-FirstDataForwardCharacter DisplayString
  internetProfile-Visa2Options-SecondDataForwardCharacter DisplayString
  internetProfile-Visa2Options-ThirdDataForwardCharacter DisplayString
  internetProfile-Visa2Options-FourthDataForwardCharacter DisplayString
  internetProfile-Visa2Options-o1CharSequence DisplayString
  internetProfile-Visa2Options-o2CharSequence DisplayString
  internetProfile-SdtnPacketsServer INTEGER
  internetProfile-oATString DisplayString
  internetProfile-PortRedirectOptions-Protocol INTEGER
  internetProfile-PortRedirectOptions-PortNumber INTEGER
  internetProfile-PortRedirectOptions-RedirectAddress IpAddress
  internetProfile-PppoeOptions-Pppoe INTEGER
  internetProfile-PppoeOptions-BridgeNonPppoe INTEGER
  internetProfile-AtmQosOptions-UsrUpStreamContract DisplayString
  internetProfile-AtmQosOptions-UsrDnStreamContract DisplayString
  internetProfile-AtmQosOptions-SubtendingHops INTEGER
  internetProfile-BirOptions-Enable INTEGER
  internetProfile-BirOptions-ProxyArp INTEGER
  internetProfile-AtmAalOptions-AalEnabled INTEGER
  internetProfile-AtmAalOptions-AalType INTEGER
  internetProfile-AtmAalOptions-TransmitSduSize INTEGER
  internetProfile-AtmAalOptions-ReceiveSduSize INTEGER
  internetProfile-ConnUser INTEGER
  internetProfile-ModemOnHoldTimeout INTEGER
  internetProfile-PriorityOptions-Enabled INTEGER
  internetProfile-PriorityOptions-PacketClassification INTEGER
  internetProfile-PriorityOptions-MaxRtpPacketDelay INTEGER
  internetProfile-PriorityOptions-MinimumRtpPort INTEGER
  internetProfile-PriorityOptions-MaximumRtpPort INTEGER
  internetProfile-PriorityOptions-NoHighPrioPktDuration INTEGER
  internetProfile-Action-o INTEGER

MibinternetProfile-IpxOptions-IpxSapHsProxyNetEntry  
SEQUENCE    
  internetProfile-IpxOptions-IpxSapHsProxyNet-Station DisplayString
  internetProfile-IpxOptions-IpxSapHsProxyNet-Index-o INTEGER
  internetProfile-IpxOptions-IpxSapHsProxyNet INTEGER

Defined Values

mibinternetProfile 10.1.529.23.1
OBJECT IDENTIFIER    

mibinternetProfileTable 10.1.529.23.1.1
A list of mibinternetProfile profile entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MibinternetProfileEntry

mibinternetProfileEntry 10.1.529.23.1.1.1
A mibinternetProfile entry containing objects that maps to the parameters of mibinternetProfile profile.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MibinternetProfileEntry  

internetProfile-Station 10.1.529.23.1.1.1.1
The name of the host we will be communicating with. This name is used as part of the authentication process when authentication is being used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-Active 10.1.529.23.1.1.1.2
A profile can be disabled by setting this field to no. There is no difference between an inactive profile and no profile at all to the remainder of the code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-EncapsulationProtocol 10.1.529.23.1.1.1.3
The encapsulation protocol to be used when communicating with the named station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mpp(1), mp(2), ppp(3), combinet(9), slip(4), cslip(5), frameRelay(6), frameRelayCircuit(10), x25pad(11), euraw(12), euui(13), tcpRaw(7), rfc1356X25(14), ara(15), t3pos(17), dtpt(8), x32(18), atm(21), atmFrameRelayCircuit(22), hdlcNrm(23), atmCircuit(24), visa2(26), atmSvcSig(27), atmIma(28)  

internetProfile-CalledNumberType 10.1.529.23.1.1.1.4
Indication of whether national number, international number, etc. is specified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), international(2), national(3), networkSpecific(4), local(5), abbrev(7)  

internetProfile-DialNumber 10.1.529.23.1.1.1.5
The phone number of the named station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SubAddress 10.1.529.23.1.1.1.292
The sub-address extension to the dialed number of the station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-Clid 10.1.529.23.1.1.1.6
The calling line number for authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AutoProfiles 10.1.529.23.1.1.1.420
This parameter enables or disables automatic profile creation. Currently only the Stinger IDSL provides this capability for PPP Circuits and Frame Relay Circuits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-IpRoutingEnabled 10.1.529.23.1.1.1.7
Enable/disable IP routing for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-VjHeaderPrediction 10.1.529.23.1.1.1.8
Enable/disable Van Jacabson TCP Header prediction processing on this connection if supported by the selected encapsulation protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-RemoteAddress 10.1.529.23.1.1.1.9
The remote address with netmask of the named host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-NetmaskRemote 10.1.529.23.1.1.1.10
The netmask of the remote address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-LocalAddress 10.1.529.23.1.1.1.11
The interface address with netmask, if required, of the local end. If left zero the interface is assumed to be an unnumbered interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-NetmaskLocal 10.1.529.23.1.1.1.12
The netmask of the local interface address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-RoutingMetric 10.1.529.23.1.1.1.13
The routing metric, typically measured in number of hops, to be used in the routing table entry created for this connection when the connection is active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-Preference 10.1.529.23.1.1.1.14
The preference used for comparing this route to other routes. Preference has a higher priority than metric. As with the metric field, the lower the number, the higher the preference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-DownPreference 10.1.529.23.1.1.1.15
The preference used for comparing the down-metric route to other routes. Preference has a higher priority than metric. As with the metric field, the lower the number, the higher the preference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-PrivateRoute 10.1.529.23.1.1.1.16
Enable/disable distribution of the route created for this connection via routing protocols. Private routes are used internally, but never advertized to the outside world.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-MulticastAllowed 10.1.529.23.1.1.1.17
Enable this connection as a multicast traffic client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-AddressPool 10.1.529.23.1.1.1.18
The number of the address pool from which an address for this host should be obtained when using assigned addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-IpDirect 10.1.529.23.1.1.1.19
The address of the next-hop when IP direct routing is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-Rip 10.1.529.23.1.1.1.20
Specify if RIP or RIP-2 should be used over this connection and if used in both directions or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER routingOff(1), routingSendOnly(2), routingRecvOnly(3), routingSendAndRecv(4), routingSendOnlyV2(5), routingRecvOnlyV2(6), routingSendAndRecvV2(7)  

internetProfile-IpOptions-RouteFilter 10.1.529.23.1.1.1.21
The name of this filter. All filters are referenced by name so a name must be assigned to active filters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-SourceIpCheck 10.1.529.23.1.1.1.22
Enable/disable source ip checking. Packets with source ip address which doesn't match with negotiated remote ip address will be dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-OspfOptions-Active 10.1.529.23.1.1.1.23
Is OSPF active on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-OspfOptions-Area 10.1.529.23.1.1.1.24
The area that this interface belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-OspfOptions-AreaType 10.1.529.23.1.1.1.25
The type of Area. Normal, Stub, NSSA
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), stub(2), nSSA(3)  

internetProfile-IpOptions-OspfOptions-HelloInterval 10.1.529.23.1.1.1.26
The hello interval (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-DeadInterval 10.1.529.23.1.1.1.27
The dead interval (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-Priority 10.1.529.23.1.1.1.28
The priority of this router in DR elections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-AuthenType 10.1.529.23.1.1.1.29
The type of OSPF authentication in effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), simple(2), md5(3)  

internetProfile-IpOptions-OspfOptions-AuthKey 10.1.529.23.1.1.1.30
The authentication key.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-OspfOptions-KeyId 10.1.529.23.1.1.1.31
The key identifier for MD5 authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-Cost 10.1.529.23.1.1.1.32
The output cost.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-DownCost 10.1.529.23.1.1.1.33
The output cost when the link is physically down but virtually up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-AseType 10.1.529.23.1.1.1.34
The OSPF ASE type of this LSA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

internetProfile-IpOptions-OspfOptions-AseTag 10.1.529.23.1.1.1.35
The OSPF ASE tag of this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-OspfOptions-TransitDelay 10.1.529.23.1.1.1.36
The estimated transit delay (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-RetransmitInterval 10.1.529.23.1.1.1.37
The retransmit time (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-NonMulticast 10.1.529.23.1.1.1.38
Use direct addresses instead of multicast addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-OspfOptions-NetworkType 10.1.529.23.1.1.1.250
The type of network attachment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER broadcast(2), nonBroadcast(3), pointToPoint(4)  

internetProfile-IpOptions-OspfOptions-PollInterval 10.1.529.23.1.1.1.251
The poll interval for non-broadcast multi-access network (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-OspfOptions-Md5AuthKey 10.1.529.23.1.1.1.252
The MD5 authentication key.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-MulticastRateLimit 10.1.529.23.1.1.1.39
The multicast rate limit in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-MulticastGroupLeaveDelay 10.1.529.23.1.1.1.40
The multicast group leave in seconds. This is only for IGMP Version 2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpOptions-ClientDnsPrimaryAddr 10.1.529.23.1.1.1.41
User specific DNS Primary Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-ClientDnsSecondaryAddr 10.1.529.23.1.1.1.42
User specific DNS Secondary Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-ClientDnsAddrAssign 10.1.529.23.1.1.1.43
A flag to control assigning user specific DNS Addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-ClientDefaultGateway 10.1.529.23.1.1.1.44
The default gateway to be used for traffic from this connection, if no specific route is found in the routing table. If left zero, the system's default route will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-TosOptions-Active 10.1.529.23.1.1.1.45
Activate type of service for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-TosOptions-Precedence 10.1.529.23.1.1.1.46
Tag the precedence bits (priority bits) in the TOS octet of IP datagram header with this value when match occurs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n-000(1), n-001(33), n-010(65), n-011(97), n-100(129), n-101(161), n-110(193), n-111(225)  

internetProfile-IpOptions-TosOptions-TypeOfService 10.1.529.23.1.1.1.47
Tag the type of service field in the TOS octet of IP datagram header with this value when match occurs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), cost(3), reliability(5), throughput(9), latency(17)  

internetProfile-IpOptions-TosOptions-ApplyTo 10.1.529.23.1.1.1.48
Define how the type-of-service applies to data flow for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER incoming(1025), outgoing(2049), both(3073)  

internetProfile-IpOptions-TosOptions-MarkingType 10.1.529.23.1.1.1.459
Select type of packet marking.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER precedenceTos(1), dscp(2)  

internetProfile-IpOptions-TosOptions-Dscp 10.1.529.23.1.1.1.460
DSCP tag to be used in marking of the packets (if marking-type = dscp).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-TosFilter 10.1.529.23.1.1.1.49
The name of type-of-service filter. All filters are referenced by name so a name must be assigned to active filters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-ClientWinsPrimaryAddr 10.1.529.23.1.1.1.293
User specific WINS Primary Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-ClientWinsSecondaryAddr 10.1.529.23.1.1.1.294
User specific WINS Secondary Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-IpOptions-ClientWinsAddrAssign 10.1.529.23.1.1.1.295
A flag to control assigning user specific WINS Addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-PrivateRouteTable 10.1.529.23.1.1.1.296
Private route table ID for this connection
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-PrivateRouteProfileRequired 10.1.529.23.1.1.1.297
Parameter to decide default action,if private route table not found. If set to yes, the call will be cleared if the private route profile cannot be found. If set to no, the call will be allowed to complete, even if the private route profile cannot be found.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpOptions-NatProfileName 10.1.529.23.1.1.1.419
The profile to use for NAT translations on this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpOptions-AddressRealm 10.1.529.23.1.1.1.421
Used to determine which interfaces and WANs are connected to the same address space--they will have the identical values in this field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpxOptions-IpxRoutingEnabled 10.1.529.23.1.1.1.50
Enable/disable IPX routing for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpxOptions-PeerMode 10.1.529.23.1.1.1.51
Enable/disable full routing between peer or use the pool to assign a network number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER routerPeer(1), dialinPeer(2)  

internetProfile-IpxOptions-Rip 10.1.529.23.1.1.1.52
This field specifies RIP traffic when peer is a Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER both(1), send(2), recv(3), off(4)  

internetProfile-IpxOptions-Sap 10.1.529.23.1.1.1.53
This field specifies SAP traffic when peer is a Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER both(1), send(2), recv(3), off(4)  

internetProfile-IpxOptions-DialQuery 10.1.529.23.1.1.1.54
Indicate if we should dial to this connection if our SAP table contains no NetWare file servers, and a workstation makes a get-nearest-server query.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpxOptions-NetNumber 10.1.529.23.1.1.1.55
The network number of the other router. May be zero, if we don't know what it is.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpxOptions-NetAlias 10.1.529.23.1.1.1.56
The network number of the point to point link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpxOptions-SapFilter 10.1.529.23.1.1.1.57
The name of the IPX SAP filter, if any, to use with this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-IpxOptions-IpxSpoofing 10.1.529.23.1.1.1.58
Selects the IPX spoofing mode when bridging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), clientSpoofing(2), serverSpoofing(3)  

internetProfile-IpxOptions-SpoofingTimeout 10.1.529.23.1.1.1.59
IPX NetWare connection timeout value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-IpxOptions-IpxSapHsProxy 10.1.529.23.1.1.1.60
Use IPX SAP Home Server Proxy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpxOptions-IpxHeaderCompression 10.1.529.23.1.1.1.61
Use IPX header compression if encapsulation supports it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-BridgingOptions-BridgingGroup 10.1.529.23.1.1.1.62
Select the bridging group for this connection. Group 0 disables bridging. All packets not routed will be bridged to interfaces belonging to the same group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-BridgingOptions-DialOnBroadcast 10.1.529.23.1.1.1.63
Enable/disable outdial when broadcast frames are received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-BridgingOptions-IpxSpoofing 10.1.529.23.1.1.1.64
Selects the IPX spoofing mode when bridging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), clientSpoofing(2), serverSpoofing(3)  

internetProfile-BridgingOptions-SpoofingTimeout 10.1.529.23.1.1.1.65
IPX NetWare connection timeout value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-BridgingOptions-Fill2 10.1.529.23.1.1.1.253
filler to get to 32 bit boundary
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-BridgingOptions-BridgeType 10.1.529.23.1.1.1.66
For the P25 user interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparentBridging(1), ipxClientBridging(2), noBridging(3)  

internetProfile-BridgingOptions-Egress 10.1.529.23.1.1.1.285
Enable/disable Egress on this interface. This interface will become the exit path for all packets destined to the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-SessionOptions-CallFilter 10.1.529.23.1.1.1.67
The name of the filter used to determine if a packet should cause the idle timer to be reset or, when the answer profile is used for connection profile defaults, if a call should be placed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SessionOptions-DataFilter 10.1.529.23.1.1.1.68
The name of the filter used to determine if packets should be forwarded or dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SessionOptions-FilterPersistence 10.1.529.23.1.1.1.69
Determines if filters should persist between calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-SessionOptions-FilterRequired 10.1.529.23.1.1.1.298
If No, the call will be allowed to come up even if the specified filter was not found either locally, in the cache or in RADIUS. If Yes, then the call will be cleared if the specified filter was not found either locally, in the cache or in RADIUS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-SessionOptions-IdleTimer 10.1.529.23.1.1.1.70
The number of seconds of no activity before a call will be dropped. The value 0 disables the idle timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-TsIdleMode 10.1.529.23.1.1.1.71
The method used to determine when the terminal server idle session timer is reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noIdle(1), inputOnlyIdle(2), inputOutputIdle(3)  

internetProfile-SessionOptions-TsIdleTimer 10.1.529.23.1.1.1.72
The number of seconds of no activity as defined by the idle mode before a session will be terminated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-Backup 10.1.529.23.1.1.1.73
Name of the backup connection profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SessionOptions-Secondary 10.1.529.23.1.1.1.74
A secondary internet profile used for dial back-up support.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SessionOptions-MaxCallDuration 10.1.529.23.1.1.1.76
The number of minutes of connect time before a call will be dropped. The value 0 disables the connection timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-VtpGateway 10.1.529.23.1.1.1.77
This profile is an VTP gateway connection to an mobile client's home network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-SessionOptions-Blockcountlimit 10.1.529.23.1.1.1.78
Maximum number of failed attempts allowed for connection before blocking the call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-Blockduration 10.1.529.23.1.1.1.79
Number of seconds that connection attempts to non responding network will be blocked before allowing retries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-MaxVtpTunnels 10.1.529.23.1.1.1.81
If this profile is a VTP gateway, then this parameter specifies the maximum number of VTP tunnels allowed to the VTP home network specified by the name of this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-RedialDelayLimit 10.1.529.23.1.1.1.82
Number of seconds delay before allowing a redial
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-SesRateType 10.1.529.23.1.1.1.83
The per ses rate type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sdsl(2), adslCap(3), adslCell(4), adslDmt(5)  

internetProfile-SessionOptions-SesRateMode 10.1.529.23.1.1.1.84
The per ses rate mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER autobaud(2), singlebaud(3)  

internetProfile-SessionOptions-SesAdslCapUpRate 10.1.529.23.1.1.1.85
The per session adsl-cap up stream data rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n-1088000(51), n-952000(52), n-816000(53), n-680000(54), n-544000(55), n-408000(56), n-272000(57)  

internetProfile-SessionOptions-SesAdslCapDownRate 10.1.529.23.1.1.1.86
The per session adsl-cap down stream data rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n-7168000(1), n-6272000(2), n-5120000(3), n-4480000(4), n-3200000(5), n-2688000(6), n-2560000(7), n-2240000(8), n-1920000(9), n-1600000(10), n-1280000(11), n-960000(12), n-640000(13)  

internetProfile-SessionOptions-SesSdslRate 10.1.529.23.1.1.1.87
The per session symetrical data rate. This parameter does not pertain to the old 16 port sdsl card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n-144000(1), n-272000(2), n-400000(3), n-528000(4), n-784000(5), n-1168000(6), n-1552000(7), n-2320000(8), n-160000(9), n-192000(10), n-208000(11), n-384000(12), n-416000(13), n-768000(14), n-1040000(15), n-1152000(16), n-1536000(17), n-1568000(18), n-1680000(19), n-1920000(20), n-2160000(21)  

internetProfile-SessionOptions-SesAdslDmtUpRate 10.1.529.23.1.1.1.88
The per session adsl-dmt up stream data rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER upstrmMegMax(151), n-1088000(152), n-928000(153), n-896000(154), n-800000(155), n-768000(156), n-640000(157), n-512000(158), n-384000(159), n-256000(160), n-128000(161)  

internetProfile-SessionOptions-SesAdslDmtDownRate 10.1.529.23.1.1.1.89
The per session adsl-dmt down stream data rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dwnstrmMegMax(101), n-9504000(102), n-8960000(103), n-8000000(104), n-7168000(105), n-6272000(106), n-5120000(107), n-4480000(108), n-3200000(109), n-2688000(110), n-2560000(111), n-2240000(112), n-1920000(113), n-1600000(114), n-1280000(115), n-960000(116), n-768000(117), n-640000(118), n-512000(119), n-384000(120), n-256000(121), n-128000(122)  

internetProfile-SessionOptions-RxDataRateLimit 10.1.529.23.1.1.1.90
The maximum information rate to be received from the named station (kbps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-TxDataRateLimit 10.1.529.23.1.1.1.91
The maximum information rate to be transmitted to the named station (kbps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-CirTimer 10.1.529.23.1.1.1.414
The CIR timer in (milli-sec).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-TrafficShaper 10.1.529.23.1.1.1.286
The traffic shaper assigned to this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SessionOptions-MaxtapLogServer 10.1.529.23.1.1.1.299
The name or the IP Address of the host to which the MaxTap start/stop notifications has to be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SessionOptions-MaxtapDataServer 10.1.529.23.1.1.1.300
The name or the IP Address of the host to which the tapped data has to be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SessionOptions-Priority 10.1.529.23.1.1.1.415
Priority of the link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), high(2)  

internetProfile-TelcoOptions-AnswerOriginate 10.1.529.23.1.1.1.92
Specifies if this profile can be used for incoming calls, outgoing calls, or both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ansAndOrig(1), answerOnly(2), originateOnly(3)  

internetProfile-TelcoOptions-Callback 10.1.529.23.1.1.1.93
When true a call received from the named host requires callback security. The number dialed is the phoneNumber from this connection profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-TelcoOptions-CallType 10.1.529.23.1.1.1.94
Nailed channel usage for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), ft1(2), ft1Mpp(3), bri(4), ft1Bo(5), dChan(6), aodi(7), megamax(8)  

internetProfile-TelcoOptions-NailedGroups 10.1.529.23.1.1.1.95
All the nailed groups belonging to a session. MPP supports multiple groups.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TelcoOptions-Ft1Caller 10.1.529.23.1.1.1.96
Specifies if this side should initiate calls when a mix of nailed and switched calls are being used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-TelcoOptions-Force56kbps 10.1.529.23.1.1.1.97
If yes then inbound 64 kbps calls are connected at 56 kbps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-TelcoOptions-DataService 10.1.529.23.1.1.1.98
The type of bearer channel capability to set up for each switched call in the session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)  

internetProfile-TelcoOptions-CallByCall 10.1.529.23.1.1.1.99
The call-by-call signaling value for PRI lines.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TelcoOptions-BillingNumber 10.1.529.23.1.1.1.100
A number used for billing purposes. This number, if present, is used as either a 'billing suffix' or the 'calling party number'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TelcoOptions-TransitNumber 10.1.529.23.1.1.1.101
The string for use in the 'transit network IE' for PRI calling when going through a LEC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TelcoOptions-ExpectCallback 10.1.529.23.1.1.1.102
When true we expect calls to the named host will result in a callback from that host. This would occur if the remote host were authenticating us based on Caller ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-TelcoOptions-DialoutAllowed 10.1.529.23.1.1.1.103
When true, this connection is allowed to use the LAN modems to place outgoing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-TelcoOptions-DelayCallback 10.1.529.23.1.1.1.104
Number of seconds to delay before dialing back. Values of 0-3 seconds are treated as 3 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TelcoOptions-NasPortType 10.1.529.23.1.1.1.254
Indicates the type of physical port being used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER async(4), sync(5), isdnSync(6), v120IsdnAsync(7), v110IsdnAsync(8), virtual(9), v32IsdnAsync(10), vdspAsyncIsdn(11), arqPdcIsdn(12), any(1), digital(2), analog(3)  

internetProfile-PppOptions-SendAuthMode 10.1.529.23.1.1.1.105
The type of PPP authentication to use for this call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noPppAuth(1), papPppAuth(2), chapPppAuth(3), anyPppAuth(4), desPapPppAuth(5), tokenPapPppAuth(6), tokenChapPppAuth(7), cacheTokenPppAuth(8), msChapPppAuth(9), papPreferred(10)  

internetProfile-PppOptions-PppCircuit 10.1.529.23.1.1.1.422
PPP Circuit. Set to type to enable the PPP Circuit Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), transparent(2)  

internetProfile-PppOptions-PppCircuitName 10.1.529.23.1.1.1.423
The peer datalink identifier for a PPP circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-PppOptions-BiDirectionalAuth 10.1.529.23.1.1.1.354
This parameter enables the authentication to be done in both directions. It can be used only with CHAP or MS-CHAP authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), allowed(2), required(3)  

internetProfile-PppOptions-SendPassword 10.1.529.23.1.1.1.106
This is the password sent to the far end; used for MPP and PPP PAP and CHAP security.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-PppOptions-SubstituteSendName 10.1.529.23.1.1.1.107
Name send to the far end, if different from the global system name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-PppOptions-RecvPassword 10.1.529.23.1.1.1.108
This is the password received from the far end; used for MPP and PPP PAP and CHAP security.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-PppOptions-SubstituteRecvName 10.1.529.23.1.1.1.355
Name expected from the far end used during a bi-directional authentication. If it is null the profile name will be used in place. This parameter is used only for outgoing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-PppOptions-LinkCompression 10.1.529.23.1.1.1.109
The type of link compression to use for PPP, MP, and MPP calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), stac(2), stac9(3), msStac(4), mppc(5)  

internetProfile-PppOptions-Mru 10.1.529.23.1.1.1.110
The Maximum Receive Unit, i.e. the largest frame we will accept.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PppOptions-Lqm 10.1.529.23.1.1.1.111
Link Quality Monitoring. Set to Yes to enable the PPP LQM protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-PppOptions-LqmMinimumPeriod 10.1.529.23.1.1.1.112
The minimum period, in 1/100 of a second, that we will accept/send link quality monitoring packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PppOptions-LqmMaximumPeriod 10.1.529.23.1.1.1.113
The maximum period, in 1/100 of a second, that we will accept/send link quality monitoring packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PppOptions-CbcpEnabled 10.1.529.23.1.1.1.114
Enable Microsoft Callback Control Protocol Negotiation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-PppOptions-ModeCallbackControl 10.1.529.23.1.1.1.115
CBCP operation allowed on to use for this call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cbcpNoCallback(2), cbcpUserNumber(3), cbcpProfileNum(4), cbcpAll(8)  

internetProfile-PppOptions-DelayCallbackControl 10.1.529.23.1.1.1.116
Delay to request before callback to us is initiated
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PppOptions-TrunkGroupCallbackControl 10.1.529.23.1.1.1.117
Trunk group to use for the callback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PppOptions-SplitCodeDotUserEnabled 10.1.529.23.1.1.1.118
TRUE if local splitting of passwords is desired in CACHE-TOKEN. This feature permits the use of usernames longer than five chars, when using a typical 4 digit pin and 6 digit ACE token code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-PppOptions-PppInterfaceType 10.1.529.23.1.1.1.119
PPP network interface for this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hdlcLike(1), frameRelay(2), aal5(3), x25(4)  

internetProfile-PppOptions-Mtu 10.1.529.23.1.1.1.301
The Maximum Transmit Unit, i.e. the largest frame we will transmit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MpOptions-BaseChannelCount 10.1.529.23.1.1.1.120
When the session is initially set up, and if it is a fixed session, the number of channels to be used for the call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MpOptions-MinimumChannels 10.1.529.23.1.1.1.121
The default value for the minimum number of channels in a multi-channel call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MpOptions-MaximumChannels 10.1.529.23.1.1.1.122
The default value for the maximum number of channels in a multi-channel call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MpOptions-BacpEnable 10.1.529.23.1.1.1.123
Enable Bandwidth Allocation Control Protocol (BACP).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-MpOptions-BodEnable 10.1.529.23.1.1.1.255
Enable Bandwidth On Demand.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-MpOptions-CallbackrequestEnable 10.1.529.23.1.1.1.284
Allow BAP CallBackRequest.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-MppOptions-AuxSendPassword 10.1.529.23.1.1.1.124
This is the password sent to the far end; used for MPP PAP-TOKEN-CHAP security.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-MppOptions-DynamicAlgorithm 10.1.529.23.1.1.1.125
The algorithm to use to calculate the average link utilization. Bandwidth changes are performed on the average utilization, not current utilization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER constant(1), linear(2), quadratic(3)  

internetProfile-MppOptions-BandwidthMonitorDirection 10.1.529.23.1.1.1.126
The direction to monitor link utilization. A unit can monitor transmit, transmit and receive, or turn off monitoring entirely.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transmit(1), transmitRecv(2), none(3)  

internetProfile-MppOptions-IncrementChannelCount 10.1.529.23.1.1.1.127
Number of channels to increment as a block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MppOptions-DecrementChannelCount 10.1.529.23.1.1.1.128
Number of channels to decrement as a block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MppOptions-SecondsHistory 10.1.529.23.1.1.1.129
The number of seconds of history that link utilization is averaged over to make bandwidth changes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MppOptions-AddPersistence 10.1.529.23.1.1.1.130
The number of seconds of that the average line utilization must exceed the target utilization before bandwidth will be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MppOptions-SubPersistence 10.1.529.23.1.1.1.131
The number of seconds of that the average line utilization must fall below the target utilization before bandwidth will be reduced. Bandwidth will not be reduced if the reduced bandwidth would exceed the target utilization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MppOptions-TargetUtilization 10.1.529.23.1.1.1.132
The default value for the target utilization. Bandwidth changes occur when the average utilization exceeds or falls below this value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-MppOptions-X25chanTargetUtilization 10.1.529.23.1.1.1.380
The default value for the X25 channel target utilization. Bandwidth changes occur when the average utilization exceeds or falls below this value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-FrOptions-FrameRelayProfile 10.1.529.23.1.1.1.133
Frame Relay profile name, specifies link over which this circuit is established.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-FrOptions-CircuitType 10.1.529.23.1.1.1.302
The type of circuit, permanent (PVC) or switched (SVC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

internetProfile-FrOptions-Dlci 10.1.529.23.1.1.1.134
The assigned DLCI value for this connection, for PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-FrOptions-CircuitName 10.1.529.23.1.1.1.135
The peer frame relay datalink for a FR circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-FrOptions-FrLinkType 10.1.529.23.1.1.1.303
The frame relay link type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparentLink(1), hostLink(2), trunkLink(3)  

internetProfile-FrOptions-FrDirectEnabled 10.1.529.23.1.1.1.136
Enable the frame relay direct option for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-FrOptions-FrDirectProfile 10.1.529.23.1.1.1.137
Name of the frame relay profile that will be used for frame-relay-direct routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-FrOptions-FrDirectDlci 10.1.529.23.1.1.1.138
The DLCI of the frame relay direct connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-FrOptions-MfrBundleName 10.1.529.23.1.1.1.287
Name of the multi-link frame-relay profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TcpClearOptions-Host 10.1.529.23.1.1.1.139
The first TCP CLEAR login host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TcpClearOptions-Port 10.1.529.23.1.1.1.140
The TCP port of the first login-host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TcpClearOptions-Host2 10.1.529.23.1.1.1.141
The second TCP CLEAR login host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TcpClearOptions-Port2 10.1.529.23.1.1.1.142
The TCP port of the second login-host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TcpClearOptions-Host3 10.1.529.23.1.1.1.143
The third TCP CLEAR login host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TcpClearOptions-Port3 10.1.529.23.1.1.1.144
The TCP port of the third login-host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TcpClearOptions-Host4 10.1.529.23.1.1.1.145
The fourth TCP CLEAR login host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TcpClearOptions-Port4 10.1.529.23.1.1.1.146
The TCP port of the fourth login-host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TcpClearOptions-DetectEndOfPacket 10.1.529.23.1.1.1.147
Set to yes to attempt packet detection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-TcpClearOptions-EndOfPacketPattern 10.1.529.23.1.1.1.148
End of packet pattern to match
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TcpClearOptions-FlushLength 10.1.529.23.1.1.1.149
Set the maximum packet length before flush
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TcpClearOptions-FlushTime 10.1.529.23.1.1.1.150
Set the maximum packet hold time before flush
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AraOptions-RecvPassword 10.1.529.23.1.1.1.151
The password received from the far end.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AraOptions-MaximumConnectTime 10.1.529.23.1.1.1.152
Maximum time in minutes that an ARA session can stay connected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X25Options-X25Profile 10.1.529.23.1.1.1.157
Name of the x25 profile that this profile is associated with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-Lcn 10.1.529.23.1.1.1.158
The LCN (if any) for this profile (for PVCs).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X25Options-X3Profile 10.1.529.23.1.1.1.159
X.3 profile parameter index
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER crtProfile(1), infonetProfile(2), defaultProfile(3), scenProfile(4), ccSspProfile(5), ccTspProfile(6), hardcopyProfile(7), hdxProfile(8), sharkProfile(9), posProfile(12), nullProfile(10), customProfile(11)  

internetProfile-X25Options-MaxCalls 10.1.529.23.1.1.1.160
Max number of unsuccessful calls
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X25Options-VcTimerEnable 10.1.529.23.1.1.1.161
PAD VCE enable flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-X25Options-X25EncapsType 10.1.529.23.1.1.1.162
RFC1356 encaps Type: RFC877/SNAP/NULL
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rfc877(1), snap(2), null(3), ppp(4), aodi(5)  

internetProfile-X25Options-RemoteX25Address 10.1.529.23.1.1.1.461
X.25 address of remote station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-ReverseCharge 10.1.529.23.1.1.1.164
Reverse charge request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-X25Options-CallMode 10.1.529.23.1.1.1.165
Call mode for this interface: Both/Outgoing/Incoming
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER both(1), outgoing(2), incoming(3)  

internetProfile-X25Options-AnswerX25Address 10.1.529.23.1.1.1.462
Answer number: mandatory if call mode is incoming or both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-InactivityTimer 10.1.529.23.1.1.1.167
X.25 Inactivity Timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-X25Options-Windowsize 10.1.529.23.1.1.1.463
Window size requested on outgoing X.25 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X25Options-Packetsize 10.1.529.23.1.1.1.464
Packet size requested on outgoing X.25 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n-6(7), n-7(8), n-8(9), n-9(10), n-10(11), n-11(12), n-12(13)  

internetProfile-X25Options-X25Rpoa 10.1.529.23.1.1.1.169
X.25 RPOA facility.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-X25CugIndex 10.1.529.23.1.1.1.170
X.25 CUG index. Supplied as a right-justified field e.g. 1 should be 0001
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-X25Nui 10.1.529.23.1.1.1.171
X.25 NUI facility.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadBanner 10.1.529.23.1.1.1.172
PAD banner message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadPrompt 10.1.529.23.1.1.1.173
PAD prompt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadNuiPrompt 10.1.529.23.1.1.1.174
NUI prompt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadNuiPwPrompt 10.1.529.23.1.1.1.175
NUI password prompt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadAlias1 10.1.529.23.1.1.1.176
PAD Alias number 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadAlias2 10.1.529.23.1.1.1.177
PAD Alias number 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadAlias3 10.1.529.23.1.1.1.178
PAD Alias number 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadDiagDisp 10.1.529.23.1.1.1.179
PAD D/B channel Diagnostic display.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-X25Options-PadDefaultListen 10.1.529.23.1.1.1.180
PAD diag listen address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PadDefaultPw 10.1.529.23.1.1.1.181
PAD diag password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-X121SourceAddress 10.1.529.23.1.1.1.471
X.121 address to use to identify this call
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X25Options-PosAuth 10.1.529.23.1.1.1.472
Use POS Authentication
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

internetProfile-EuOptions-DceAddr 10.1.529.23.1.1.1.182
The address of the DCE side of the link when the EUNET UI protocol is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-EuOptions-DteAddr 10.1.529.23.1.1.1.183
The address of the DTE side of the link when the EUNET UI protocol is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-EuOptions-Mru 10.1.529.23.1.1.1.184
The MRU used for EUNET protocol connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X75Options-KFramesOutstanding 10.1.529.23.1.1.1.185
Number of frames outstanding before we require an ack. Defaults to 7.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X75Options-N2Retransmissions 10.1.529.23.1.1.1.186
Number of retransmissions allowed. Defaults to 10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X75Options-T1RetranTimer 10.1.529.23.1.1.1.187
Number of milliseconds between retransmissions. Defaults to 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-X75Options-FrameLength 10.1.529.23.1.1.1.188
Frame length to use for incoming X.75 connections. Defaults to 1024.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AppletalkOptions-AtalkRoutingEnabled 10.1.529.23.1.1.1.189
Enable/disable AppleTalk routine for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AppletalkOptions-AtalkStaticZoneName 10.1.529.23.1.1.1.190
The static Zone Name to show for this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AppletalkOptions-AtalkStaticNetStart 10.1.529.23.1.1.1.191
The Net Number start value for this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AppletalkOptions-AtalkStaticNetEnd 10.1.529.23.1.1.1.192
The Net Number end value for this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AppletalkOptions-AtalkPeerMode 10.1.529.23.1.1.1.193
Enable/disable full routing between peer or using proxy AARP to assign a network address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER routerPeer(1), dialinPeer(2)  

internetProfile-UsrRadOptions-AcctType 10.1.529.23.1.1.1.194
Specify where accounting information for this connection will be sent, either the global server list, a per-user override, or both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER global(1), local(2), both(3)  

internetProfile-UsrRadOptions-AcctHost 10.1.529.23.1.1.1.195
The IP address of the RADIUS accounting host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-UsrRadOptions-AcctPort 10.1.529.23.1.1.1.196
The UDP port of the RADIUS Accounting server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-UsrRadOptions-AcctKey 10.1.529.23.1.1.1.197
The RADIUS accounting key.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-UsrRadOptions-AcctTimeout 10.1.529.23.1.1.1.198
Number of seconds to wait for a response to accounting request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-UsrRadOptions-AcctIdBase 10.1.529.23.1.1.1.199
The Base to use in reporting the Account ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER acctBase10(1), acctBase16(2)  

internetProfile-CalledNumber 10.1.529.23.1.1.1.200
The called line number for authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-DhcpOptions-ReplyEnabled 10.1.529.23.1.1.1.201
Set to yes to enable replies to DHCP clients.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-DhcpOptions-PoolNumber 10.1.529.23.1.1.1.202
Allocate addresses from this pool.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-DhcpOptions-MaximumLeases 10.1.529.23.1.1.1.203
Maximum number of leases allowed on this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-SharedProf 10.1.529.23.1.1.1.283
When TRUE multiple users may share a connection profile, as long as IP addresses are not duplicated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-MaxSharedUsers 10.1.529.23.1.1.1.465
Limits the maximum number of end users allowed to connect using a shared connection profile. The default value is 0 which means there is no limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-X25Profile 10.1.529.23.1.1.1.205
Name of the x25 profile that this profile is associated with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-T3posOptions-MaxCalls 10.1.529.23.1.1.1.206
Max number of unsuccessful calls
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-AutoCallX121Address 10.1.529.23.1.1.1.207
X.121 address to auto-call upon session startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-T3posOptions-ReverseCharge 10.1.529.23.1.1.1.208
Reverse charge request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-T3posOptions-Answer 10.1.529.23.1.1.1.209
Answer number: mandatory if call mode is incoming or both.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-T3posOptions-T3PosHostInitMode 10.1.529.23.1.1.1.210
T3POS Host Initialization mode: LOCAL/BIN-LOCAL/TRANSPARENT/BLIND
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), binLocal(2), transparent(3), blind(4), unknown(5)  

internetProfile-T3posOptions-T3PosDteInitMode 10.1.529.23.1.1.1.211
T3POS DTE Initialization mode: LOCAL/BIN-LOCAL/TRANSPARENT/BLIND
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), binLocal(2), transparent(3), blind(4), unknown(5)  

internetProfile-T3posOptions-T3PosEnqHandling 10.1.529.23.1.1.1.212
T3POS ENQ handling param
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

internetProfile-T3posOptions-T3PosMaxBlockSize 10.1.529.23.1.1.1.213
T3POS Max block size: 512/1024
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n-512(1), n-1024(2)  

internetProfile-T3posOptions-T3PosT1 10.1.529.23.1.1.1.214
T3POS T1 timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-T3PosT2 10.1.529.23.1.1.1.215
T3POS T2 timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-T3PosT3 10.1.529.23.1.1.1.216
T3POS T3 timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-T3PosT4 10.1.529.23.1.1.1.217
T3POS T4 timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-T3PosT5 10.1.529.23.1.1.1.218
T3POS T5 timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-T3PosT6 10.1.529.23.1.1.1.219
T3POS T6 timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-T3posOptions-T3PosMethodOfHostNotif 10.1.529.23.1.1.1.220
T3POS Method of Host Notification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), callRequestPacket(2), modeSwitchFrame(3)  

internetProfile-T3posOptions-T3PosPidSelection 10.1.529.23.1.1.1.221
T3POS PID selection: X.29, T3POS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x29(1), t3pos(2)  

internetProfile-T3posOptions-T3PosAckSuppression 10.1.529.23.1.1.1.222
T3POS ACK suppression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

internetProfile-T3posOptions-X25Rpoa 10.1.529.23.1.1.1.223
X.25 RPOA facility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-T3posOptions-X25CugIndex 10.1.529.23.1.1.1.224
X.25 CUG index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-T3posOptions-X25Nui 10.1.529.23.1.1.1.225
X.25 NUI facility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-T3posOptions-DataFormat 10.1.529.23.1.1.1.226
T3POS Open/Local Data Format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dataFormat7e1(1), dataFormat7o1(2), dataFormat7m1(3), dataFormat7s1(4), dataFormat8n1(5)  

internetProfile-T3posOptions-LinkAccessType 10.1.529.23.1.1.1.227
T3POS Link access type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER axtypeDedicated(1), axtypeDialIn(2)  

internetProfile-FramedOnly 10.1.529.23.1.1.1.228
A profile can be restricted to only doing the framed commands (ppp, mpp, slip, and quit) by setting this to YES
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AltdialNumber1 10.1.529.23.1.1.1.229
The first alternate phone number of the named station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AltdialNumber2 10.1.529.23.1.1.1.230
The second alternate phone number of the named station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AltdialNumber3 10.1.529.23.1.1.1.231
The third alternate phone number of the named station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X32Options-X32Profile 10.1.529.23.1.1.1.232
Name of the x25 profile that this profile is associated with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-X32Options-CallMode 10.1.529.23.1.1.1.233
Call mode for this interface: Incoming
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER both(1), outgoing(2), incoming(3)  

internetProfile-X32Options-X32ApplMode 10.1.529.23.1.1.1.424
Appl mode for this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER netToNet(1), isdnCircuitMode(2), isdnPacketMode(3), last(4)  

internetProfile-TunnelOptions-ProfileType 10.1.529.23.1.1.1.234
The type of connection this profile describes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), mobileClient(2), gatewayProfile(3), dialoutProfile(4)  

internetProfile-TunnelOptions-TunnelingProtocol 10.1.529.23.1.1.1.235
The protocol used for tunneling, if enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), pptpProtocol(2), l2fProtocol(3), l2tpProtocol(4), atmpProtocol(5), vtpProtocol(6), ipinipProtocol(8)  

internetProfile-TunnelOptions-MaxTunnels 10.1.529.23.1.1.1.236
If this profile is a tunnel gateway, then this parameter specifies the maximum number of tunnels allowed to the home network specified by the name of this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TunnelOptions-AtmpHaRip 10.1.529.23.1.1.1.237
Allows an ATMP home agent to send routing updates to the home network consisting of the mobile nodes' addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ripOff(1), ripSendV2(2)  

internetProfile-TunnelOptions-PrimaryTunnelServer 10.1.529.23.1.1.1.238
The IP address or hostname of the primary tunnel server if this is a mobile client's profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-SecondaryTunnelServer 10.1.529.23.1.1.1.239
The IP address or hostname of the secondary tunnel server if this is a mobile client's profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-UdpPort 10.1.529.23.1.1.1.240
The default UDP port to use when communicating with the ATMP home agent, if this is a mobile client's profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-TunnelOptions-Password 10.1.529.23.1.1.1.241
The password required by the tunnel server, if this is a mobile client profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-HomeNetworkName 10.1.529.23.1.1.1.242
The name of the home network if the ATMP home agent is operating in gateway mode. It should be empty if the ATMP home agent is operating in router mode. For L2TP, it indicates the Private Group ID value for a client. Used for ATMP and L2TP mobile client's profiles.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-ClientAuthId 10.1.529.23.1.1.1.413
The system name used by the Tunnel Initiator during Tunnel establishment for the purposes of tunnel authentication. This is different and independent from user authentication. Used on L2TP and L2F.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-ServerAuthId 10.1.529.23.1.1.1.417
The system name used by the Tunnel Terminator during Tunnel establishment for the purposes of tunnel authentication. This is different and independent from user authentication. Used on L2TP and L2F.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-Vrouter 10.1.529.23.1.1.1.356
The name of the virtual router used for the tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-AssignmentId 10.1.529.23.1.1.1.418
The identification assigned to tunnels so that sessions could be grouped into different tunnels based on this Id. This Id only has local significance and is not transmited to the remote tunnel-endpoint.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-TunnelOptions-TosCopying 10.1.529.23.1.1.1.473
Control the TOS byte of the outer IP header
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpsecOptions-Enabled 10.1.529.23.1.1.1.474
IPSec can be disabled on a profile by setting this field to no.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-IpsecOptions-SecurityPolicyDatabase 10.1.529.23.1.1.1.475
The name of the IPSec SPD profile to be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-PriNumberingPlanId 10.1.529.23.1.1.1.244
PRI Called Party element's Numbering-Plan-ID value for outgoing PRI calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), iSDN(2), private(10)  

internetProfile-Vrouter 10.1.529.23.1.1.1.245
Specifies the VRouter in which this profile belongs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-CrossConnectIndex 10.1.529.23.1.1.1.425
AToM Mib cross connect index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-Atm1483type 10.1.529.23.1.1.1.246
The type of AAL5 multiplexing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER aal5Llc(1), aal5Vc(2)  

internetProfile-AtmOptions-Vpi 10.1.529.23.1.1.1.247
The VPI of this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-Vci 10.1.529.23.1.1.1.248
The VCI of this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-NailedGroup 10.1.529.23.1.1.1.256
A number that identifies the set of lines that makes up a nailed-group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-CastType 10.1.529.23.1.1.1.426
The connection topology type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER p2p(2), p2mproot(3), p2mpleaf(4)  

internetProfile-AtmOptions-ConnKind 10.1.529.23.1.1.1.427
The use of call control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pvc(2), svcIncoming(3), svcOutgoing(4), spvcInitiator(5), spvcTarget(6)  

internetProfile-AtmOptions-AtmServiceType 10.1.529.23.1.1.1.257
ATM service type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmUbrService(1), atmCbrService(2), atmAbrService(3), atmVbrService(4)  

internetProfile-AtmOptions-AtmServiceRate 10.1.529.23.1.1.1.258
ATM service rate is the minimum bits per second that is required.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-VpSwitching 10.1.529.23.1.1.1.304
Is this VP switching? VP = 0 is used for VC switching and VP > 0 is used for VP switching.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmOptions-TargetAtmAddress 10.1.529.23.1.1.1.428
The target ATM Address of this Soft PVcc or PVpc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-TargetSelect 10.1.529.23.1.1.1.429
Indicates whether the target VPI/VCI values are to be used at the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER required(2), any(3)  

internetProfile-AtmOptions-TargetVpi 10.1.529.23.1.1.1.430
Target VPI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-TargetVci 10.1.529.23.1.1.1.431
Target VCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-SpvcRetryInterval 10.1.529.23.1.1.1.448
Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-SpvcRetryThreshold 10.1.529.23.1.1.1.449
The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite number of call attempts that means failure is not declared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-SpvcRetryLimit 10.1.529.23.1.1.1.450
Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-AtmDirectEnabled 10.1.529.23.1.1.1.306
Enable ATM Direct.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmOptions-AtmDirectProfile 10.1.529.23.1.1.1.307
The atm connection profile name to be used for the ATM Direct connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-VcFaultManagement 10.1.529.23.1.1.1.357
The VC fault management function to be used for this VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), segmentLoopback(2), endToEndLoopback(3)  

internetProfile-AtmOptions-VcMaxLoopbackCellLoss 10.1.529.23.1.1.1.358
The maximum number of consecutive cell loopback failures before the call is disconnected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmOptions-SvcOptions-Enabled 10.1.529.23.1.1.1.308
Enable ATM SVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-NumberingPlan 10.1.529.23.1.1.1.381
Numbering plan for an SVC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), isdn(2), aesa(3), unknown(5), x121(9)  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress 10.1.529.23.1.1.1.382
An SVC address in a native E.164 format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format 10.1.529.23.1.1.1.383
An AESA address format used to define this SVC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), dccAesa(2), icdAesa(6), e164Aesa(4), customAesa(5)  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi 10.1.529.23.1.1.1.384
An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi 10.1.529.23.1.1.1.385
An Initial Domain Identifier (IDI) portion of the AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp 10.1.529.23.1.1.1.386
A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi 10.1.529.23.1.1.1.387
An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel 10.1.529.23.1.1.1.388
A selector (SEL) field that may be used by the end system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan 10.1.529.23.1.1.1.389
Numbering plan for an SVC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), isdn(2), aesa(3), unknown(5), x121(9)  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress 10.1.529.23.1.1.1.390
An SVC address in a native E.164 format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format 10.1.529.23.1.1.1.391
An AESA address format used to define this SVC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), dccAesa(2), icdAesa(6), e164Aesa(4), customAesa(5)  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi 10.1.529.23.1.1.1.392
An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi 10.1.529.23.1.1.1.393
An Initial Domain Identifier (IDI) portion of the AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp 10.1.529.23.1.1.1.394
A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi 10.1.529.23.1.1.1.395
An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel 10.1.529.23.1.1.1.396
A selector (SEL) field that may be used by the end system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-AtmInverseArp 10.1.529.23.1.1.1.327
Send Atm Inverse Arp request for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmOptions-Fr08Mode 10.1.529.23.1.1.1.367
The FR-08 transparent mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER translation(1), transparent(2)  

internetProfile-AtmOptions-AtmCircuitProfile 10.1.529.23.1.1.1.432
The atm circuit profile name to be used for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmOptions-OamAisF5 10.1.529.23.1.1.1.451
Disable/Enable sending OAM AIS F5 cells when pvc is down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), segment(2), endToEnd(3)  

internetProfile-AtmOptions-OamSupport 10.1.529.23.1.1.1.452
Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments in total.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmOptions-Mtu 10.1.529.23.1.1.1.468
The maximum packet size (excluding LLC encapsulation if used) that can be transmitted to a remote peer without performing fragmentation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-HdlcNrmOptions-SnrmResponseTimeout 10.1.529.23.1.1.1.259
SNRM Response Timeout in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-HdlcNrmOptions-SnrmRetryCounter 10.1.529.23.1.1.1.260
SNRM Retry Counter in units.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-HdlcNrmOptions-PollTimeout 10.1.529.23.1.1.1.261
HDLC-NRM Poll Reponse Timeout in milliseconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-HdlcNrmOptions-PollRate 10.1.529.23.1.1.1.262
HDLC-NRM Poll Rate in milliseconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-HdlcNrmOptions-PollRetryCount 10.1.529.23.1.1.1.263
Poll Response Retry Counter in units
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-HdlcNrmOptions-Primary 10.1.529.23.1.1.1.264
Primary station (Yes) or Secondary station (No).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-HdlcNrmOptions-AsyncDrop 10.1.529.23.1.1.1.368
Drop Async I-frames (Yes) or process (No).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-HdlcNrmOptions-StationPollAddress 10.1.529.23.1.1.1.416
Secondary station address to use for SNRM polling
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-Atm1483type 10.1.529.23.1.1.1.265
The type of AAL5 multiplexing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER aal5Llc(1), aal5Vc(2)  

internetProfile-AtmConnectOptions-Vpi 10.1.529.23.1.1.1.266
The VPI of this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-Vci 10.1.529.23.1.1.1.267
The VCI of this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-NailedGroup 10.1.529.23.1.1.1.268
A number that identifies the set of lines that makes up a nailed-group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-CastType 10.1.529.23.1.1.1.433
The connection topology type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER p2p(2), p2mproot(3), p2mpleaf(4)  

internetProfile-AtmConnectOptions-ConnKind 10.1.529.23.1.1.1.434
The use of call control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pvc(2), svcIncoming(3), svcOutgoing(4), spvcInitiator(5), spvcTarget(6)  

internetProfile-AtmConnectOptions-AtmServiceType 10.1.529.23.1.1.1.269
ATM service type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmUbrService(1), atmCbrService(2), atmAbrService(3), atmVbrService(4)  

internetProfile-AtmConnectOptions-AtmServiceRate 10.1.529.23.1.1.1.270
ATM service rate is the minimum bits per second that is required.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-VpSwitching 10.1.529.23.1.1.1.328
Is this VP switching? VP = 0 is used for VC switching and VP > 0 is used for VP switching.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmConnectOptions-TargetAtmAddress 10.1.529.23.1.1.1.435
The target ATM Address of this Soft PVcc or PVpc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-TargetSelect 10.1.529.23.1.1.1.436
Indicates whether the target VPI/VCI values are to be used at the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER required(2), any(3)  

internetProfile-AtmConnectOptions-TargetVpi 10.1.529.23.1.1.1.437
Target VPI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-TargetVci 10.1.529.23.1.1.1.438
Target VCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-SpvcRetryInterval 10.1.529.23.1.1.1.453
Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-SpvcRetryThreshold 10.1.529.23.1.1.1.454
The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite number of call attempts that means failure is not declared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-SpvcRetryLimit 10.1.529.23.1.1.1.455
Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-AtmDirectEnabled 10.1.529.23.1.1.1.330
Enable ATM Direct.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmConnectOptions-AtmDirectProfile 10.1.529.23.1.1.1.331
The atm connection profile name to be used for the ATM Direct connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-VcFaultManagement 10.1.529.23.1.1.1.369
The VC fault management function to be used for this VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), segmentLoopback(2), endToEndLoopback(3)  

internetProfile-AtmConnectOptions-VcMaxLoopbackCellLoss 10.1.529.23.1.1.1.370
The maximum number of consecutive cell loopback failures before the call is disconnected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmConnectOptions-SvcOptions-Enabled 10.1.529.23.1.1.1.332
Enable ATM SVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-NumberingPlan 10.1.529.23.1.1.1.397
Numbering plan for an SVC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), isdn(2), aesa(3), unknown(5), x121(9)  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress 10.1.529.23.1.1.1.398
An SVC address in a native E.164 format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format 10.1.529.23.1.1.1.399
An AESA address format used to define this SVC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), dccAesa(2), icdAesa(6), e164Aesa(4), customAesa(5)  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi 10.1.529.23.1.1.1.400
An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi 10.1.529.23.1.1.1.401
An Initial Domain Identifier (IDI) portion of the AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp 10.1.529.23.1.1.1.402
A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi 10.1.529.23.1.1.1.403
An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel 10.1.529.23.1.1.1.404
A selector (SEL) field that may be used by the end system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan 10.1.529.23.1.1.1.405
Numbering plan for an SVC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), isdn(2), aesa(3), unknown(5), x121(9)  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress 10.1.529.23.1.1.1.406
An SVC address in a native E.164 format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format 10.1.529.23.1.1.1.407
An AESA address format used to define this SVC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undefined(1), dccAesa(2), icdAesa(6), e164Aesa(4), customAesa(5)  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi 10.1.529.23.1.1.1.408
An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi 10.1.529.23.1.1.1.409
An Initial Domain Identifier (IDI) portion of the AESA address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp 10.1.529.23.1.1.1.410
A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi 10.1.529.23.1.1.1.411
An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel 10.1.529.23.1.1.1.412
A selector (SEL) field that may be used by the end system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-AtmInverseArp 10.1.529.23.1.1.1.351
Send Atm Inverse Arp request for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmConnectOptions-Fr08Mode 10.1.529.23.1.1.1.379
The FR-08 transparent mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER translation(1), transparent(2)  

internetProfile-AtmConnectOptions-AtmCircuitProfile 10.1.529.23.1.1.1.439
The atm circuit profile name to be used for this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmConnectOptions-OamAisF5 10.1.529.23.1.1.1.456
Disable/Enable sending OAM AIS F5 cells when pvc is down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), segment(2), endToEnd(3)  

internetProfile-AtmConnectOptions-OamSupport 10.1.529.23.1.1.1.457
Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments in total.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmConnectOptions-Mtu 10.1.529.23.1.1.1.469
The maximum packet size (excluding LLC encapsulation if used) that can be transmitted to a remote peer without performing fragmentation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-Visa2Options-IdleCharacterDelay 10.1.529.23.1.1.1.271
Idle Character Delay in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-Visa2Options-FirstDataForwardCharacter 10.1.529.23.1.1.1.272
First Data Forwarding Character. Default is 0x04
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-Visa2Options-SecondDataForwardCharacter 10.1.529.23.1.1.1.273
Second Data Forwarding Character. Default is 0x06
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-Visa2Options-ThirdDataForwardCharacter 10.1.529.23.1.1.1.274
Third Data Forwarding Character. Default is 0x15
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-Visa2Options-FourthDataForwardCharacter 10.1.529.23.1.1.1.275
Fourth Data Forwarding Character. Default is 0x05
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-Visa2Options-o1CharSequence 10.1.529.23.1.1.1.276
1 character data forwarding sequence. Default is 0x03
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-Visa2Options-o2CharSequence 10.1.529.23.1.1.1.277
2 character data forwarding sequence. Default is 0x00:0x03
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-SdtnPacketsServer 10.1.529.23.1.1.1.278
Decides if this profile Handles sdtn-packets. Note, the Sdtn data packets may still be encapsulated
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-oATString 10.1.529.23.1.1.1.279
Allows the user to enter customized AT commands in the modem dial or answer string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-PortRedirectOptions-Protocol 10.1.529.23.1.1.1.280
The protocol to be redirected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), tcp(7), udp(18)  

internetProfile-PortRedirectOptions-PortNumber 10.1.529.23.1.1.1.281
Port number to be redirected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PortRedirectOptions-RedirectAddress 10.1.529.23.1.1.1.282
IP Address of server to which packet is to be redirected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

internetProfile-PppoeOptions-Pppoe 10.1.529.23.1.1.1.288
Enable or disable the ability to establish PPP over Ethernet session over this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-PppoeOptions-BridgeNonPppoe 10.1.529.23.1.1.1.289
States wheather to bridge all other protocols except PPPoE on this interface or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmQosOptions-UsrUpStreamContract 10.1.529.23.1.1.1.352
Quality of Service (QOS) contract for user up stream traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmQosOptions-UsrDnStreamContract 10.1.529.23.1.1.1.353
Quality of Service (QOS) contract for user down stream traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

internetProfile-AtmQosOptions-SubtendingHops 10.1.529.23.1.1.1.470
Number of hops from which the end-point of this connection originates
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n-0Level(1), n-1Level(2), n-2Level(3), n-3Level(4)  

internetProfile-BirOptions-Enable 10.1.529.23.1.1.1.290
Enable or disable the BIR on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-BirOptions-ProxyArp 10.1.529.23.1.1.1.291
Specify how proxy arp is to be used on an interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmAalOptions-AalEnabled 10.1.529.23.1.1.1.440
Enable the AAl options
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-AtmAalOptions-AalType 10.1.529.23.1.1.1.441
ATM Adaptation Layer type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER aal0(1), aal5(2), unspecified(3)  

internetProfile-AtmAalOptions-TransmitSduSize 10.1.529.23.1.1.1.442
Size of the trasmitt Service Data Unit in octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-AtmAalOptions-ReceiveSduSize 10.1.529.23.1.1.1.443
Size of the receive Service Data Unit in octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-ConnUser 10.1.529.23.1.1.1.444
Connetion User type .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER default(1), cpcs(2)  

internetProfile-ModemOnHoldTimeout 10.1.529.23.1.1.1.458
The allowable Modem-on-Hold timeout values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mohDisabled(1), n-10SecMohTimeout(2), n-20SecMohTimeout(3), n-30SecMohTimeout(4), n-40SecMohTimeout(5), n-1MinMohTimeout(6), n-2MinMohTimeout(7), n-3MinMohTimeout(8), n-4MinMohTimeout(9), n-6MinMohTimeout(10), n-8MinMohTimeout(11), n-12MinMohTimeout(12), n-16MinMohTimeout(13), noLimitMohTimeout(14), connProfileUseGlobal(15)  

internetProfile-PriorityOptions-Enabled 10.1.529.23.1.1.1.482
Enable priority classification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

internetProfile-PriorityOptions-PacketClassification 10.1.529.23.1.1.1.477
Method used to classify PPP packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER qosTag(2), udpPortRange(3)  

internetProfile-PriorityOptions-MaxRtpPacketDelay 10.1.529.23.1.1.1.478
Maximum delay for RTP packets in milli-seconds. Used for calculating the fragment size for the non-rtp traffic using the same link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PriorityOptions-MinimumRtpPort 10.1.529.23.1.1.1.479
Minimum UDP port for prioritization
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PriorityOptions-MaximumRtpPort 10.1.529.23.1.1.1.480
Maximum UDP port for prioritization
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-PriorityOptions-NoHighPrioPktDuration 10.1.529.23.1.1.1.481
The number of seconds of no high priority packets before disabling IP fragmentation of low priority packets. The value 0 disables checking duration of no high priority packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

internetProfile-Action-o 10.1.529.23.1.1.1.249
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

mibinternetProfile-IpxOptions-IpxSapHsProxyNetTable 10.1.529.23.1.2
A list of mibinternetProfile__ipx_options__ipx_sap_hs_proxy_net profile entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MibinternetProfile-IpxOptions-IpxSapHsProxyNetEntry

mibinternetProfile-IpxOptions-IpxSapHsProxyNetEntry 10.1.529.23.1.2.1
A mibinternetProfile__ipx_options__ipx_sap_hs_proxy_net entry containing objects that maps to the parameters of mibinternetProfile__ipx_options__ipx_sap_hs_proxy_net profile.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MibinternetProfile-IpxOptions-IpxSapHsProxyNetEntry  

internetProfile-IpxOptions-IpxSapHsProxyNet-Station 10.1.529.23.1.2.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

internetProfile-IpxOptions-IpxSapHsProxyNet-Index-o 10.1.529.23.1.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

internetProfile-IpxOptions-IpxSapHsProxyNet 10.1.529.23.1.2.1.3
The Network# for IPX SAP Proxy Home Server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER