ASCEND-MIBHDSL2-MIB

File: ASCEND-MIBHDSL2-MIB.mib (18392 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Mibhdsl2DslLineStatusEntry  
SEQUENCE    
  hdsl2DslLineStatus-Shelf-o INTEGER
  hdsl2DslLineStatus-Slot-o INTEGER
  hdsl2DslLineStatus-Item-o INTEGER
  hdsl2DslLineStatus-PhysicalAddress-Shelf INTEGER
  hdsl2DslLineStatus-PhysicalAddress-Slot INTEGER
  hdsl2DslLineStatus-PhysicalAddress-ItemNumber INTEGER
  hdsl2DslLineStatus-LineState INTEGER
  hdsl2DslLineStatus-SparePhysicalAddress-Shelf INTEGER
  hdsl2DslLineStatus-SparePhysicalAddress-Slot INTEGER
  hdsl2DslLineStatus-SparePhysicalAddress-ItemNumber INTEGER
  hdsl2DslLineStatus-SparingState INTEGER
  hdsl2DslLineStatus-SparingChangeReason INTEGER
  hdsl2DslLineStatus-SparingChangeTime INTEGER
  hdsl2DslLineStatus-SparingChangeCounter INTEGER
  hdsl2DslLineStatus-VpiVciRange INTEGER
  hdsl2DslLineStatus-VpSwitchingVpi INTEGER
  hdsl2DslLineStatus-PhysicalStatus-IfGroupIndex INTEGER
  hdsl2DslLineStatus-PhysicalStatus-UnitType INTEGER
  hdsl2DslLineStatus-PhysicalStatus-InterfaceType INTEGER
  hdsl2DslLineStatus-PhysicalStatus-DevLineState INTEGER
  hdsl2DslLineStatus-PhysicalStatus-OperationalRate INTEGER
  hdsl2DslLineStatus-PhysicalStatus-FirmwareVer DisplayString
  hdsl2DslLineStatus-PhysicalStatus-HardwareVer INTEGER
  hdsl2DslLineStatus-PhysicalStatus-NetworkType INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Days INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Hours INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Minutes INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-RxSignalPresent INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-LineQuality INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-UpDwnCntr INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-SelfTest INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-TransmitPower INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-FramerSyncStatus INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-CodeViolations INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-ErroredSecond INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-SeverelyErroredSecond INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-LoswSecond INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-UnavailableSecond INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-LoopAttenuation INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-Snr INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-SturLoopAttenuation INTEGER
  hdsl2DslLineStatus-PhysicalStatistic-SturSnr INTEGER
  hdsl2DslLineStatus-Action-o INTEGER

Defined Values

mibhdsl2DslLineStatus 1.3.6.1.4.1.529.23.159
OBJECT IDENTIFIER    

mibhdsl2DslLineStatusTable 1.3.6.1.4.1.529.23.159.1
A list of mibhdsl2DslLineStatus profile entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Mibhdsl2DslLineStatusEntry

mibhdsl2DslLineStatusEntry 1.3.6.1.4.1.529.23.159.1.1
A mibhdsl2DslLineStatus entry containing objects that maps to the parameters of mibhdsl2DslLineStatus profile.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Mibhdsl2DslLineStatusEntry  

hdsl2DslLineStatus-Shelf-o 1.3.6.1.4.1.529.23.159.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-Slot-o 1.3.6.1.4.1.529.23.159.1.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-Item-o 1.3.6.1.4.1.529.23.159.1.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.159.1.1.4
The number of the shelf that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

hdsl2DslLineStatus-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.159.1.1.5
The number of the slot that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

hdsl2DslLineStatus-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.159.1.1.6
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-LineState 1.3.6.1.4.1.529.23.159.1.1.7
The overall state of the line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER doesNotExist(1), disabled(2), active(3)  

hdsl2DslLineStatus-SparePhysicalAddress-Shelf 1.3.6.1.4.1.529.23.159.1.1.8
The number of the shelf that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

hdsl2DslLineStatus-SparePhysicalAddress-Slot 1.3.6.1.4.1.529.23.159.1.1.9
The number of the slot that the addressed physical device resides on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

hdsl2DslLineStatus-SparePhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.159.1.1.10
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-SparingState 1.3.6.1.4.1.529.23.159.1.1.11
The sparing state of the line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sparingNone(1), primaryActive(2), primaryInactive(3), secondaryActive(4), secondaryInactive(5)  

hdsl2DslLineStatus-SparingChangeReason 1.3.6.1.4.1.529.23.159.1.1.12
The reason for the last sparing state change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), manual(2), automatic(3), test(4)  

hdsl2DslLineStatus-SparingChangeTime 1.3.6.1.4.1.529.23.159.1.1.13
The time of the last sparing state change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-SparingChangeCounter 1.3.6.1.4.1.529.23.159.1.1.14
The number of sparing state changes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-VpiVciRange 1.3.6.1.4.1.529.23.159.1.1.15
The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vpi01Vci321023(6), vpi03Vci32511(1), vpi07Vci32255(2), vpi015Vci32127(3), vpi031Vci3263(4), notApplicable(5)  

hdsl2DslLineStatus-VpSwitchingVpi 1.3.6.1.4.1.529.23.159.1.1.16
VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatus-IfGroupIndex 1.3.6.1.4.1.529.23.159.1.1.17
Interface groups index assigned to this physical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatus-UnitType 1.3.6.1.4.1.529.23.159.1.1.18
Unit types defines if the node is operating Central Office or Customer Premise equipment software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER coe(1), cpe(2)  

hdsl2DslLineStatus-PhysicalStatus-InterfaceType 1.3.6.1.4.1.529.23.159.1.1.19
Interface type defines if the node is operating on HDSL2 or GSHDSL
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER default(1), gShdsl(2), hdsl2(3)  

hdsl2DslLineStatus-PhysicalStatus-DevLineState 1.3.6.1.4.1.529.23.159.1.1.20
Display of current interface state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER portUp(2), test(3), startupHandshake(4), startupTraining(5), startupDownload(6), idle(7), down(8), outOfService(9), unknown(10), analogLoopback(11), digitalLoopback(12)  

hdsl2DslLineStatus-PhysicalStatus-OperationalRate 1.3.6.1.4.1.529.23.159.1.1.21
Operational up and down stream rate. Zero means unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatus-FirmwareVer 1.3.6.1.4.1.529.23.159.1.1.22
Firmware version ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hdsl2DslLineStatus-PhysicalStatus-HardwareVer 1.3.6.1.4.1.529.23.159.1.1.23
Hardware chip version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatus-NetworkType 1.3.6.1.4.1.529.23.159.1.1.43
Current Standard Network type. Either Annex A, Annex B or Annex B ANFP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Days 1.3.6.1.4.1.529.23.159.1.1.24
Number of days that the DSL line has been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Hours 1.3.6.1.4.1.529.23.159.1.1.25
Number of hours that the DSL line has been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Minutes 1.3.6.1.4.1.529.23.159.1.1.26
Number of minutes that the DSL line has been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-RxSignalPresent 1.3.6.1.4.1.529.23.159.1.1.27
State if the receive signal is present or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(3), no(2)  

hdsl2DslLineStatus-PhysicalStatistic-LineQuality 1.3.6.1.4.1.529.23.159.1.1.28
While the port is in the up state, this parameter displays the line quality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-UpDwnCntr 1.3.6.1.4.1.529.23.159.1.1.29
Interface Up Down counter value displays the number of times the interface trasitions from a down to up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-SelfTest 1.3.6.1.4.1.529.23.159.1.1.30
Hardware/firmware self test results.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER passed(1), selfTestFailed(2), localLoopBackFailed(3)  

hdsl2DslLineStatus-PhysicalStatistic-TransmitPower 1.3.6.1.4.1.529.23.159.1.1.31
Transmit power in DB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-FramerSyncStatus 1.3.6.1.4.1.529.23.159.1.1.32
Framer sync status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inSync(2), outOfSync(1)  

hdsl2DslLineStatus-PhysicalStatistic-CodeViolations 1.3.6.1.4.1.529.23.159.1.1.33
Line is defined as a count of HDSL2 CRC anomalies occuring during the accumuation period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-ErroredSecond 1.3.6.1.4.1.529.23.159.1.1.34
Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-SeverelyErroredSecond 1.3.6.1.4.1.529.23.159.1.1.35
Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-LoswSecond 1.3.6.1.4.1.529.23.159.1.1.36
Line is defined as a count of 1 second intervals during which one or more HDSL2 LOSW defects are declared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-UnavailableSecond 1.3.6.1.4.1.529.23.159.1.1.37
Line is a count of 1 second intervals for which the HDSL2 line is unavailable. The HDSL2 line becomes unavailable at the onset of 10 contiguous SES-L's. Once unavailable the HDSL2 line becomes available at the onset of 10 contiguous seconds with no SES-L's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-LoopAttenuation 1.3.6.1.4.1.529.23.159.1.1.38
Current loop attenuation in DB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-Snr 1.3.6.1.4.1.529.23.159.1.1.40
While the port is in the up state, this parameter displays the Signal to Noise Ratio.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-SturLoopAttenuation 1.3.6.1.4.1.529.23.159.1.1.41
Current loop attenuation in DB from the STU-R.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-PhysicalStatistic-SturSnr 1.3.6.1.4.1.529.23.159.1.1.42
While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdsl2DslLineStatus-Action-o 1.3.6.1.4.1.529.23.159.1.1.39
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor