ASCEND-MIBDBA-MIB

File: ASCEND-MIBDBA-MIB.mib (21298 bytes)

Imported modules

ASCEND-MIB

RFC1155-SMI

RFC-1212

Imported symbols

configuration

IpAddress

OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

MibdBAProfileEntry
SEQUENCE
	dBAProfile-Shelf-o	INTEGER
	dBAProfile-Slot-o	INTEGER
	dBAProfile-Item-o	INTEGER
	dBAProfile-LogicalItem-o	INTEGER
	dBAProfile-LogicalAddress-PhysicalAddress-Shelf	INTEGER
	dBAProfile-LogicalAddress-PhysicalAddress-Slot	INTEGER
	dBAProfile-LogicalAddress-PhysicalAddress-ItemNumber	INTEGER
	dBAProfile-LogicalAddress-LogicalItem	INTEGER
	dBAProfile-Name	DisplayString
	dBAProfile-PhoneNumber	DisplayString
	dBAProfile-BillingNumber	DisplayString
	dBAProfile-oCallType	INTEGER
	dBAProfile-oCallMgm	INTEGER
	dBAProfile-oDataSvc	INTEGER
	dBAProfile-Force56	INTEGER
	dBAProfile-BaseChannelCount	INTEGER
	dBAProfile-IncrementChannelCount	INTEGER
	dBAProfile-DecrementChannelCount	INTEGER
	dBAProfile-oFailAction	INTEGER
	dBAProfile-BitInversionRequired	INTEGER
	dBAProfile-Ft1Caller	INTEGER
	dBAProfile-Ft1Timeout	INTEGER
	dBAProfile-CallByCallID	INTEGER
	dBAProfile-CalledNumberType	INTEGER
	dBAProfile-UnknownPlanUnknown	INTEGER
	dBAProfile-LocalPlanIsdn	INTEGER
	dBAProfile-TransitNumber	DisplayString
	dBAProfile-oAutoBERT	INTEGER
	dBAProfile-TimedCall	INTEGER
	dBAProfile-FlagIdle	INTEGER
	dBAProfile-oDynAlg	INTEGER
	dBAProfile-SecondsOfHistory	INTEGER
	dBAProfile-AddSecondsOfPersistence	INTEGER
	dBAProfile-RemoveSecondsOfPersistence	INTEGER
	dBAProfile-NailedUpGroup	INTEGER
	dBAProfile-CallPassword	DisplayString
	dBAProfile-DbaPriNumberingPlanId	INTEGER
	dBAProfile-Action-o	INTEGER

MibdBAProfile-TimerPeriodParametersEntry
SEQUENCE
	dBAProfile-TimerPeriodParameters-Shelf-o	INTEGER
	dBAProfile-TimerPeriodParameters-Slot-o	INTEGER
	dBAProfile-TimerPeriodParameters-Item-o	INTEGER
	dBAProfile-TimerPeriodParameters-LogicalItem-o	INTEGER
	dBAProfile-TimerPeriodParameters-Index-o	INTEGER
	dBAProfile-TimerPeriodParameters-oActiv	INTEGER
	dBAProfile-TimerPeriodParameters-StartingTime	INTEGER
	dBAProfile-TimerPeriodParameters-MinimumChannelCount	INTEGER
	dBAProfile-TimerPeriodParameters-MaximumChannelCount	INTEGER
	dBAProfile-TimerPeriodParameters-TargetUtilization	INTEGER
	dBAProfile-TimerPeriodParameters-X25chanTargetUtilization	INTEGER

Defined Values

mibdBAProfile		1.3.6.1.4.1.529.23.71
OBJECT IDENTIFIER

mibdBAProfileTable		1.3.6.1.4.1.529.23.71.1
A list of mibdBAProfile profile entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MibdBAProfileEntry

mibdBAProfileEntry		1.3.6.1.4.1.529.23.71.1.1
A mibdBAProfile entry containing objects that maps to the parameters of mibdBAProfile profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MibdBAProfileEntry

dBAProfile-Shelf-o		1.3.6.1.4.1.529.23.71.1.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-Slot-o		1.3.6.1.4.1.529.23.71.1.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-Item-o		1.3.6.1.4.1.529.23.71.1.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-LogicalItem-o		1.3.6.1.4.1.529.23.71.1.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-LogicalAddress-PhysicalAddress-Shelf		1.3.6.1.4.1.529.23.71.1.1.5
The number of the shelf that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)

dBAProfile-LogicalAddress-PhysicalAddress-Slot		1.3.6.1.4.1.529.23.71.1.1.6
The number of the slot that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)

dBAProfile-LogicalAddress-PhysicalAddress-ItemNumber		1.3.6.1.4.1.529.23.71.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-LogicalAddress-LogicalItem		1.3.6.1.4.1.529.23.71.1.1.8
A number that specifies an addressable logical entity within the context of a physical address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-Name		1.3.6.1.4.1.529.23.71.1.1.9
DBA Profiles are recognized by their names given them by the user. The name is a standard null terminated ASCII string.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

dBAProfile-PhoneNumber		1.3.6.1.4.1.529.23.71.1.1.10
The number to dial for this call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

dBAProfile-BillingNumber		1.3.6.1.4.1.529.23.71.1.1.11
The billing number to use which is either a 'calling party number' or a 'billing suffix' that is appended to the end of the phone number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

dBAProfile-oCallType		1.3.6.1.4.1.529.23.71.1.1.12
session channel type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	callChNBy(1), callChNByBonding(2), callCh1Ch(3), callCh2Ch(4), callChFt1(5), callChFt1Aim(6), callChFt1Bo(7), callChFt1StaticBo(8), numberOfCallChTypes(9)

dBAProfile-oCallMgm		1.3.6.1.4.1.529.23.71.1.1.13
One of the management type listed above.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	callMgmtStaticRate(1), callMgmtManualRate(2), callMgmtDynamicRate(3), callMgmtDeltaRate(4), callMgmtTimeOfDay(5), callMgmtOneOfEight(6), callMgmtOneOfFourty(7), callMgmtBonding0(8), callMgmtBonding1(9), callMgmtBonding2(10), callMgmtBonding3(11), numberOfCallMgmtProtocols(12)

dBAProfile-oDataSvc		1.3.6.1.4.1.529.23.71.1.1.14
The type of bearer channel capability to set up for each switched call in the session.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	voice(1), n-56kRestricted(2), n-64kClear(3), n-64kRestricted(4), n-56kClear(5), n-384kRestricted(6), n-384kClear(7), n-1536kClear(8), n-1536kRestricted(9), n-128kClear(10), n-192kClear(11), n-256kClear(12), n-320kClear(13), dws384Clear(14), n-448Clear(15), n-512Clear(16), n-576Clear(17), n-640Clear(18), n-704Clear(19), n-768Clear(20), n-832Clear(21), n-896Clear(22), n-960Clear(23), n-1024Clear(24), n-1088Clear(25), n-1152Clear(26), n-1216Clear(27), n-1280Clear(28), n-1344Clear(29), n-1408Clear(30), n-1472Clear(31), n-1600Clear(32), n-1664Clear(33), n-1728Clear(34), n-1792Clear(35), n-1856Clear(36), n-1920Clear(37), x30RestrictedBearer(39), v110ClearBearer(40), n-64kX30Restricted(41), n-56kV110Clear(42), modem(43), atmodem(44), n-2456kV110(46), n-4856kV110(47), n-9656kV110(48), n-19256kV110(49), n-38456kV110(50), n-2456krV110(51), n-4856krV110(52), n-9656krV110(53), n-19256krV110(54), n-38456krV110(55), n-2464kV110(56), n-4864kV110(57), n-9664kV110(58), n-19264kV110(59), n-38464kV110(60), n-2464krV110(61), n-4864krV110(62), n-9664krV110(63), n-19264krV110(64), n-38464krV110(65), v32(66), phs64k(67), voiceOverIp(68), atmSvc(70), frameRelaySvc(71), vpnTunnel(72), wormarq(73), n-14456kV110(74), n-28856kV110(75), n-14456krV110(76), n-28856krV110(77), n-14464kV110(78), n-28864kV110(79), n-14464krV110(80), n-28864krV110(81), modem31khzAudio(82), x25Svc(83), n-144kClear(255), iptoip(263)

dBAProfile-Force56		1.3.6.1.4.1.529.23.71.1.1.15
TRUE if the data should be treated as 7-bit data even if the switchedCallType would normally imply 8 bit data.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

dBAProfile-BaseChannelCount		1.3.6.1.4.1.529.23.71.1.1.16
When the session is initially set up, and if it is a fixed session, the number of channels to be used for the call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-IncrementChannelCount		1.3.6.1.4.1.529.23.71.1.1.17
Number of channels to increment as a block.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-DecrementChannelCount		1.3.6.1.4.1.529.23.71.1.1.18
Number of channels to decrement as a block.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-oFailAction		1.3.6.1.4.1.529.23.71.1.1.19
If unable to establish a dba session based on the parameters specified, then the action to be taken is specified in the failureAction.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disc(1), reduce(2), retry(3), numberOfFailureActions(4)

dBAProfile-BitInversionRequired		1.3.6.1.4.1.529.23.71.1.1.20
TRUE if the data being transferred from the host should be inverted before being sent to the network, and FALSE otherwise. I think this needs to be supported by the device, but I will check before committing. Also, this affects the network interface too, I think.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

dBAProfile-Ft1Caller		1.3.6.1.4.1.529.23.71.1.1.21
BOOLEAN which is true for Fractional T1 calls when this side is the caller, and FALSE otherwise.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

dBAProfile-Ft1Timeout		1.3.6.1.4.1.529.23.71.1.1.22
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-CallByCallID		1.3.6.1.4.1.529.23.71.1.1.23
The ID for the call-by-call signalling for PRI.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-CalledNumberType		1.3.6.1.4.1.529.23.71.1.1.24
Indication of whether national number, international number, etc. is specified.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-UnknownPlanUnknown		1.3.6.1.4.1.529.23.71.1.1.25
If TRUE indicates that UNKNOWN number plan is used in conjunction with unknown number instead of default, ISDN.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

dBAProfile-LocalPlanIsdn		1.3.6.1.4.1.529.23.71.1.1.26
If TRUE indicates that ISDN number plan is used in conjunction with local number instead of default, PRIVATE.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

dBAProfile-TransitNumber		1.3.6.1.4.1.529.23.71.1.1.27
The string for use in the 'transit network ie' for PRI calling when going through a LEC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

dBAProfile-oAutoBERT		1.3.6.1.4.1.529.23.71.1.1.28
Should we BERT at session startup and for how long.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), n-15Sec(2), n-30Sec(3), n-60Sec(4), n-90Sec(5), n-120Sec(6), numberOfBertTestOptions(7)

dBAProfile-TimedCall		1.3.6.1.4.1.529.23.71.1.1.29
TRUE if we should pay attention to the following time period parameters. Not used when the call type is dynamic N-by.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

dBAProfile-FlagIdle		1.3.6.1.4.1.529.23.71.1.1.30
TRUE if looking for flag idle, FALSE when looking for mark idle.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

dBAProfile-oDynAlg		1.3.6.1.4.1.529.23.71.1.1.31
The algorithm to use for determining weighted line utilization.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	constant(1), linear(2), quadratic(3)

dBAProfile-SecondsOfHistory		1.3.6.1.4.1.529.23.71.1.1.32
Number of seconds to keep history data around for. This number is in the range of 1 through MAX_HISTORY_SECONDS.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-AddSecondsOfPersistence		1.3.6.1.4.1.529.23.71.1.1.33
Once the upper threshold of utilization is passed, the number of seconds it should stay there is defined here.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-RemoveSecondsOfPersistence		1.3.6.1.4.1.529.23.71.1.1.34
Once the lower threshold of utilization is passed, the number of seconds it should stay there is defined here.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-NailedUpGroup		1.3.6.1.4.1.529.23.71.1.1.35
Nailed-up group letter. This is a group or number field as defined in lcdparam.h.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-CallPassword		1.3.6.1.4.1.529.23.71.1.1.36
DBA call password authenticated against port's password on receiver side. Ignored if port's password is not defined.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

dBAProfile-DbaPriNumberingPlanId		1.3.6.1.4.1.529.23.71.1.1.37
PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-Action-o		1.3.6.1.4.1.529.23.71.1.1.38
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noAction(1), createProfile(2), deleteProfile(3)

mibdBAProfile-TimerPeriodParametersTable		1.3.6.1.4.1.529.23.71.2
A list of mibdBAProfile__timer_period_parameters profile entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MibdBAProfile-TimerPeriodParametersEntry

mibdBAProfile-TimerPeriodParametersEntry		1.3.6.1.4.1.529.23.71.2.1
A mibdBAProfile__timer_period_parameters entry containing objects that maps to the parameters of mibdBAProfile__timer_period_parameters profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MibdBAProfile-TimerPeriodParametersEntry

dBAProfile-TimerPeriodParameters-Shelf-o		1.3.6.1.4.1.529.23.71.2.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-Slot-o		1.3.6.1.4.1.529.23.71.2.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-Item-o		1.3.6.1.4.1.529.23.71.2.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-LogicalItem-o		1.3.6.1.4.1.529.23.71.2.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-Index-o		1.3.6.1.4.1.529.23.71.2.1.5
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-oActiv		1.3.6.1.4.1.529.23.71.2.1.6
Like the other sub-structures above, the number of time-periods actually used is variable. Therefore, this is an indication within each structure of usage.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2), shutdown(3)

dBAProfile-TimerPeriodParameters-StartingTime		1.3.6.1.4.1.529.23.71.2.1.7
Each time period has a starting time, and an ending time (which is implicit by the next starting time specified in another structure). The starting time is specified internally as the number of seconds after midnight, where midnight itself has a value of zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-MinimumChannelCount		1.3.6.1.4.1.529.23.71.2.1.8
The smallest number of channels to use during this time period.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-MaximumChannelCount		1.3.6.1.4.1.529.23.71.2.1.9
The maximum number of channels to use during this time period.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-TargetUtilization		1.3.6.1.4.1.529.23.71.2.1.10
The percentage utilization to aim for. This is used as a parameter to the bandwidth heuristics.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dBAProfile-TimerPeriodParameters-X25chanTargetUtilization		1.3.6.1.4.1.529.23.71.2.1.11
The percentage utilization to aim for. This is used as a parameter to the bandwidth heuristics.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER