ASCEND-MIBCLTM-MIB

File: ASCEND-MIBCLTM-MIB.mib (14972 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
STRING    

MibcltmCmdEntry  
SEQUENCE    
  cltmCmd-Index-o INTEGER
  cltmCmd-CltmSlot INTEGER
  cltmCmd-TestTimeStamp INTEGER
  cltmCmd-TestSequence INTEGER
  cltmCmd-TestOperation INTEGER
  cltmCmd-DmmType INTEGER
  cltmCmd-DmmLead INTEGER
  cltmCmd-BackgroundNoiseFilter INTEGER
  cltmCmd-BackgroundNoiseTermination INTEGER
  cltmCmd-LoopResistanceUnit INTEGER
  cltmCmd-LoopResistanceTemp INTEGER
  cltmCmd-ImpulseNoiseStartThresh INTEGER
  cltmCmd-ImpulseNoiseStartDelta INTEGER
  cltmCmd-ImpulseNoiseStartMaxCount INTEGER
  cltmCmd-ImpulseNoiseStartDeadTime INTEGER
  cltmCmd-ImpulseNoiseStartTimer INTEGER
  cltmCmd-CalibrationType INTEGER
  cltmCmd-ToneSendFreq INTEGER
  cltmCmd-ToneSendLevel INTEGER
  cltmCmd-ToneSendPeriod INTEGER
  cltmCmd-TdrUnit INTEGER
  cltmCmd-TdrGauge INTEGER
  cltmCmd-TdrVp INTEGER
  cltmCmd-TdrAvg INTEGER
  cltmCmd-TdrGetType INTEGER
  cltmCmd-TdrStartDistance INTEGER
  cltmCmd-TdrMeasurementLength INTEGER
  cltmCmd-DmmdcdPeriod INTEGER
  cltmCmd-DmmdcdVoltage INTEGER
  cltmCmd-DmmdcdImpedance INTEGER
  cltmCmd-DmmcapPeriod INTEGER
  cltmCmd-DmmallType INTEGER
  cltmCmd-DmmallPeriod INTEGER
  cltmCmd-DmmallInputImp INTEGER
  cltmCmd-CtoneType INTEGER
  cltmCmd-CtoneTone INTEGER
  cltmCmd-TtoneLead INTEGER
  cltmCmd-TtoneLevel INTEGER
  cltmCmd-TtonePeriod INTEGER
  cltmCmd-BtapStartLength INTEGER
  cltmCmd-BtapMeasureLength INTEGER
  cltmCmd-FcllocUnit INTEGER
  cltmCmd-FcllocGauge INTEGER
  cltmCmd-ShortlocUnit INTEGER
  cltmCmd-ShortlocGauge INTEGER
  cltmCmd-ShortlocType INTEGER
  cltmCmd-Action-o INTEGER

Defined Values

mibcltmCmd 1.3.6.1.4.1.529.23.66
OBJECT IDENTIFIER    

mibcltmCmdTable 1.3.6.1.4.1.529.23.66.1
A list of mibcltmCmd profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MibcltmCmdEntry

mibcltmCmdEntry 1.3.6.1.4.1.529.23.66.1.1
A mibcltmCmd entry containing objects that maps to the parameters of mibcltmCmd profile.
OBJECT-TYPE    
  MibcltmCmdEntry  

cltmCmd-Index-o 1.3.6.1.4.1.529.23.66.1.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

cltmCmd-CltmSlot 1.3.6.1.4.1.529.23.66.1.1.2
Identify the CLTM slot within the system.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17)  

cltmCmd-TestTimeStamp 1.3.6.1.4.1.529.23.66.1.1.3
Value of the sysUpTime when the last test command was issued. This parameter is cleared when any of the test parameters are changed.
OBJECT-TYPE    
  INTEGER  

cltmCmd-TestSequence 1.3.6.1.4.1.529.23.66.1.1.4
Sequence of the last issued test command.
OBJECT-TYPE    
  INTEGER  

cltmCmd-TestOperation 1.3.6.1.4.1.529.23.66.1.1.5
The current operation that is active on the CLT Module. Defaultls to 'none'. Set to 'none' to stop the test procedure.
OBJECT-TYPE    
  INTEGER none(1), dmmTest(2), lineInlsTest(3), lineBgnsTest(4), lineSignsTest(5), lineLpresTest(6), lineCldetTest(7), lineImpstartTest(8), lineImpstopTest(9), lineImpreadTest(10), calibTest(11), toneSend(12), toneRecv(13), tdrSet(14), tdrGet(15), cltmReset(16), cltmVersion(17), cltmDownload(18), dmmDcdelTest(19), dmmCapeTest(20), dmmAllTest(21), txCtrlToneTest(22), txTraceToneTest(23), stopToneTest(24), detRingerTest(25), detAturTest(26), btapTest(27), voiceDetTest(28), lineFcllocTest(29), lineShortlocTest(30), setResponderTest(31), setBypassTest(32), splitterDetectTest(33), dmmAcdelTest(34), dmmLbalTest(35), dmmSoakTest(36), sendVoiceTest(37), measVoiceTest(38), measDtaTest(39), detaptorTest(40)  

cltmCmd-DmmType 1.3.6.1.4.1.529.23.66.1.1.6
DMM Measurement Type.
OBJECT-TYPE    
  INTEGER resistance(1), dcVoltage(2), acVoltage(3), capacitance(4)  

cltmCmd-DmmLead 1.3.6.1.4.1.529.23.66.1.1.7
DMM Measurement Leads.
OBJECT-TYPE    
  INTEGER tipRing(1), tipSleeve(2), ringSleeve(3)  

cltmCmd-BackgroundNoiseFilter 1.3.6.1.4.1.529.23.66.1.1.8
Line Filter Type for Background Noise Test.
OBJECT-TYPE    
  INTEGER psd(1), e(2), f(3), g(4)  

cltmCmd-BackgroundNoiseTermination 1.3.6.1.4.1.529.23.66.1.1.9
Line Termination Type for Background Noise Test.
OBJECT-TYPE    
  INTEGER term100(1), term135(2), bridge100(3), bridge135(4)  

cltmCmd-LoopResistanceUnit 1.3.6.1.4.1.529.23.66.1.1.10
Measurement System for Loop Resistance Test.
OBJECT-TYPE    
  INTEGER metric(1), english(2)  

cltmCmd-LoopResistanceTemp 1.3.6.1.4.1.529.23.66.1.1.11
Line Temperature for Loop Resistance Test. Assigned in degree celsius/fahrenheit.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ImpulseNoiseStartThresh 1.3.6.1.4.1.529.23.66.1.1.12
Threshold for Impulse Noise Test. The Range is 50-100 dBrm.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ImpulseNoiseStartDelta 1.3.6.1.4.1.529.23.66.1.1.13
Delta Value for Impulse Noise Test. The delta range is 2-6 dB
OBJECT-TYPE    
  INTEGER  

cltmCmd-ImpulseNoiseStartMaxCount 1.3.6.1.4.1.529.23.66.1.1.14
Max Count for Impulse Noise Test. The range of the value is 1-1999.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ImpulseNoiseStartDeadTime 1.3.6.1.4.1.529.23.66.1.1.15
Dead Time Value for Impulse Noise Start Test. The value is assigned in 0.1 ms increments.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ImpulseNoiseStartTimer 1.3.6.1.4.1.529.23.66.1.1.16
Timer values for Impulse Noise Start Test. The value is assigned in 1 minute increment.
OBJECT-TYPE    
  INTEGER  

cltmCmd-CalibrationType 1.3.6.1.4.1.529.23.66.1.1.17
Calibration Type
OBJECT-TYPE    
  INTEGER insertionLoss(1), backgroundNoise(2)  

cltmCmd-ToneSendFreq 1.3.6.1.4.1.529.23.66.1.1.18
Tone Send Frequency in KHz.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ToneSendLevel 1.3.6.1.4.1.529.23.66.1.1.19
Tone Send Level in dBm.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ToneSendPeriod 1.3.6.1.4.1.529.23.66.1.1.20
Amount of time a tone is sent (1-20 Minutes).
OBJECT-TYPE    
  INTEGER  

cltmCmd-TdrUnit 1.3.6.1.4.1.529.23.66.1.1.21
Measurement System for TDR Test.
OBJECT-TYPE    
  INTEGER metric(1), english(2)  

cltmCmd-TdrGauge 1.3.6.1.4.1.529.23.66.1.1.22
TDR gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system.
OBJECT-TYPE    
  INTEGER  

cltmCmd-TdrVp 1.3.6.1.4.1.529.23.66.1.1.23
TDR VP as percentage of the speed of light.
OBJECT-TYPE    
  INTEGER  

cltmCmd-TdrAvg 1.3.6.1.4.1.529.23.66.1.1.24
Number of trials to get the avarage.
OBJECT-TYPE    
  INTEGER  

cltmCmd-TdrGetType 1.3.6.1.4.1.529.23.66.1.1.25
TDR Test Range Measurement Type. If set to automatic cltmCmdTdrStartLen and cltmCmdTdrMeasureLen do not need to be set.
OBJECT-TYPE    
  INTEGER automatic(1), manual(2)  

cltmCmd-TdrStartDistance 1.3.6.1.4.1.529.23.66.1.1.26
TDR Start Length for MANUAL mode, the value is given in feet (15..20000) for the English system and cm (460..609750) for the metric system.
OBJECT-TYPE    
  INTEGER  

cltmCmd-TdrMeasurementLength 1.3.6.1.4.1.529.23.66.1.1.27
TDR Measurement Length for MANUAL mode, the value is given in feet (300..20000) for the English system and cm (9150..609750) for the metric system.
OBJECT-TYPE    
  INTEGER  

cltmCmd-DmmdcdPeriod 1.3.6.1.4.1.529.23.66.1.1.28
Amount of time measurement is made (0,1-5 100ms;0=MAX).
OBJECT-TYPE    
  INTEGER  

cltmCmd-DmmdcdVoltage 1.3.6.1.4.1.529.23.66.1.1.29
Test voltage to be used (-230 to 230 Volts).
OBJECT-TYPE    
  INTEGER  

cltmCmd-DmmdcdImpedance 1.3.6.1.4.1.529.23.66.1.1.30
Output Impedance to be used (10 to 1000 Kohms).
OBJECT-TYPE    
  INTEGER  

cltmCmd-DmmcapPeriod 1.3.6.1.4.1.529.23.66.1.1.31
Amount of time measurement is made (0,1-5 100ms;0=MAX).
OBJECT-TYPE    
  INTEGER  

cltmCmd-DmmallType 1.3.6.1.4.1.529.23.66.1.1.32
DMM Measurement Type.
OBJECT-TYPE    
  INTEGER resistance(1), dcVoltage(2), acVoltage(3), capacitance(4)  

cltmCmd-DmmallPeriod 1.3.6.1.4.1.529.23.66.1.1.33
Amount of time measurement is made (0,1-5 100ms;0=MAX).
OBJECT-TYPE    
  INTEGER  

cltmCmd-DmmallInputImp 1.3.6.1.4.1.529.23.66.1.1.34
Input Impedance (100, 1000 Kohm).
OBJECT-TYPE    
  INTEGER  

cltmCmd-CtoneType 1.3.6.1.4.1.529.23.66.1.1.35
Control tone, type of DSL service (ADSL, GLITE).
OBJECT-TYPE    
  INTEGER adsl(1), glite(2)  

cltmCmd-CtoneTone 1.3.6.1.4.1.529.23.66.1.1.36
Control tone, type of Tone (QUIET, RESTORE).
OBJECT-TYPE    
  INTEGER quiet(1), restore(2)  

cltmCmd-TtoneLead 1.3.6.1.4.1.529.23.66.1.1.37
trace tone, Measurement Leads.
OBJECT-TYPE    
  INTEGER tipRing(1), tipSleeve(2), ringSleeve(3)  

cltmCmd-TtoneLevel 1.3.6.1.4.1.529.23.66.1.1.38
trace tone, Tone Send Level in dBm.
OBJECT-TYPE    
  INTEGER  

cltmCmd-TtonePeriod 1.3.6.1.4.1.529.23.66.1.1.39
trace tone, Amount of time a tone is sent (1-20 Minutes).
OBJECT-TYPE    
  INTEGER  

cltmCmd-BtapStartLength 1.3.6.1.4.1.529.23.66.1.1.40
Measurement start length (15 - 20000 ft. or 5 - 6097 meter).
OBJECT-TYPE    
  INTEGER  

cltmCmd-BtapMeasureLength 1.3.6.1.4.1.529.23.66.1.1.41
Measurement length (100 - 20000 ft. or 32 - 6097 meter).
OBJECT-TYPE    
  INTEGER  

cltmCmd-FcllocUnit 1.3.6.1.4.1.529.23.66.1.1.43
Measurement System for FCLLOC Test.
OBJECT-TYPE    
  INTEGER metric(1), english(2)  

cltmCmd-FcllocGauge 1.3.6.1.4.1.529.23.66.1.1.44
FCLLOC gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ShortlocUnit 1.3.6.1.4.1.529.23.66.1.1.45
Measurement System for SHORTLOC Test.
OBJECT-TYPE    
  INTEGER metric(1), english(2)  

cltmCmd-ShortlocGauge 1.3.6.1.4.1.529.23.66.1.1.46
SHORTLOC gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system.
OBJECT-TYPE    
  INTEGER  

cltmCmd-ShortlocType 1.3.6.1.4.1.529.23.66.1.1.47
SHORTLOC test type.
OBJECT-TYPE    
  INTEGER detect(1), noDetect(2)  

cltmCmd-Action-o 1.3.6.1.4.1.529.23.66.1.1.42
Tok_String
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)