ARRIS-C3-IF-MIB
File:
ARRIS-C3-IF-MIB.mib (4945 bytes)
Imported modules
Imported symbols
Defined Types
DcxIfEntry |
|
SEQUENCE |
|
|
|
|
dcxIfLoadInterval |
Unsigned32 |
|
|
dcxIfInputBitRate |
Unsigned32 |
|
|
dcxIfInputPacketRate |
Unsigned32 |
|
|
dcxIfOutputBitRate |
Unsigned32 |
|
|
dcxIfOutputPacketRate |
Unsigned32 |
|
Defined Values
cmtsC3IfMIB |
1.3.6.1.4.1.4115.1.4.3.12 |
This MIB manages the proprietary interface
table on the Arris CMTS C3 |
MODULE-IDENTITY |
|
|
|
dcxIfTable |
1.3.6.1.4.1.4115.1.4.3.12.1.1 |
Proprietary ifTable additions. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DcxIfEntry |
|
dcxIfEntry |
1.3.6.1.4.1.4115.1.4.3.12.1.1.1 |
Additional columns to each ifEntry for monitoring
average bit and packet rates per interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DcxIfEntry |
|
|
dcxIfLoadInterval |
1.3.6.1.4.1.4115.1.4.3.12.1.1.1.1 |
Number of seconds from 30 to 600 over which
the average input/output bit/packet rate is
calculated for the interface. This is not
writeable for upstream channels that have a
corresponding upstream interface entry. Such
channels will mirror the values on the interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
dcxIfOutputBitRate |
1.3.6.1.4.1.4115.1.4.3.12.1.1.1.4 |
Average bit rate per second sent from the
interface over the configured load interval.
If one load interval has not expired, this
represents the average bit rate over the
interval so far. Measurements are only made
if the interface is operational and are reset
if the load interval is changed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
dcxIfOutputPacketRate |
1.3.6.1.4.1.4115.1.4.3.12.1.1.1.5 |
Average packet rate per second sent from the
interface over the configured load interval.
If one load interval has not expired, this
represents the average packet rate over the
interval so far. Measurements are only made
if the interface is operational and are reset
if the load interval is changed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|