ARRIS-C3-FPD-MIB
File:
ARRIS-C3-FPD-MIB.mib (15065 bytes)
Imported modules
Imported symbols
Defined Types
DcxFPDMsgEntry |
|
SEQUENCE |
|
|
|
|
dcxFPDMsgIndex |
Unsigned32 |
|
|
dcxFPDMsgString |
OCTET STRING |
|
Defined Values
cmtsC3FPDMIB |
1.3.6.1.4.1.4115.1.4.3.3 |
This MIB manages the Front Panel Display (FPD)
software on the Arris CMTS C3 |
MODULE-IDENTITY |
|
|
|
dcxFPDMsgTable |
1.3.6.1.4.1.4115.1.4.3.3.1.1 |
Table of Front Panel LCD Messages. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DcxFPDMsgEntry |
|
dcxFPDMsgEntry |
1.3.6.1.4.1.4115.1.4.3.3.1.1.1 |
. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DcxFPDMsgEntry |
|
|
dcxFPDMsgIndex |
1.3.6.1.4.1.4115.1.4.3.3.1.1.1.1 |
Index used to order the FPD Messages. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
dcxFPDMsgString |
1.3.6.1.4.1.4115.1.4.3.3.1.1.1.2 |
Specifies a string that can be displayed
on the front panel. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..12) |
|
dcxFPDAttachedStatus |
1.3.6.1.4.1.4115.1.4.3.3.1.2.1 |
Displays if the front panel display is
attached to the Cmts or not. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
attached(1), detached(2) |
|
dcxFPDPowerStatus1 |
1.3.6.1.4.1.4115.1.4.3.3.1.2.2 |
Specifies if the primary power supply is
working. This is the rightmost power supply.
The following values are possible:
on(1) and off(2) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
dcxFPDPowerStatus2 |
1.3.6.1.4.1.4115.1.4.3.3.1.2.3 |
Specifies if the secondary power supply is
working. This is the leftmost power supply(nearest the fan tray).
The following values are possible:
on(1) and off(2) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
dcxFPDTemp1Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.4 |
Specifies the temperature reading for the
sensor on the CPU card closest to the CPU. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dcxFPDTemp2Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.5 |
Specifies the temperature reading for the
sensor on the CPU card, on the right hand side. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dcxFPDTemp3Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.6 |
Specifies the temperature reading for the
sensor on the Kanga card under the Roo cards
between RX4 and RX5. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dcxFPDTemp4Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.7 |
Specifies the temperature reading for the
sensor on the Kanga card under the Roo cards
between RX2 and RX3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dcxFPDFan1Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.8 |
Specifies the fan status for the fan nearest the front of the box.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rotating(1), badRotating(2) |
|
dcxFPDFan2Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.9 |
Specifies the fan status for the fan 2nd from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rotating(1), badRotating(2) |
|
dcxFPDFan3Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.10 |
Specifies the fan status for the fan 3rd from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rotating(1), badRotating(2) |
|
dcxFPDFan4Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.11 |
Specifies the fan status for the fan 4th from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rotating(1), badRotating(2) |
|
dcxFPDFan5Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.12 |
Specifies the fan status for the fan 5th from the front.
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rotating(1), badRotating(2) |
|
dcxFPDFan6Status |
1.3.6.1.4.1.4115.1.4.3.3.1.2.13 |
Specifies the fan status for the fan nearest the back of the box
The following values are possible:
Rotating(1) and BadRotating(2).
BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rotating(1), badRotating(2) |
|
dcxFPDFanUpperLimit |
1.3.6.1.4.1.4115.1.4.3.3.1.2.14 |
Specifies the upper fan limit(Upper threshold of expected current draw) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
dcxFPDFanLowerLimit |
1.3.6.1.4.1.4115.1.4.3.3.1.2.15 |
Specifies the lower fan limit(Lower threshold of expected current draw) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
dcxFPDLCDContrast |
1.3.6.1.4.1.4115.1.4.3.3.1.2.16 |
Specifies the contrast level for the LCD |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
dcxFPDLedSetStatus |
1.3.6.1.4.1.4115.1.4.3.3.1.2.17 |
Used to turn on or off a Led on the front panel |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
dcxFPDHwRevision |
1.3.6.1.4.1.4115.1.4.3.3.1.2.18 |
Specifies the front panel h/w revision |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dcxFPDSwRevision |
1.3.6.1.4.1.4115.1.4.3.3.1.2.19 |
Specifies the front panel s/w revision |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dcxFPDAttached |
1.3.6.1.4.1.4115.1.4.3.3.1.3.1 |
Front Panel Display has been attached. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDDetached |
1.3.6.1.4.1.4115.1.4.3.3.1.3.2 |
Front Panel Display has been detached. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan1Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.3 |
Fan nearest the front of the box failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan1FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.4 |
Fan nearest the front of the box is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan2Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.5 |
Fan 2nd from the front failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan2FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.6 |
Fan 2nd from the front is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan3Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.7 |
Fan 3rd from the front failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan3FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.8 |
Fan 3rd from the front is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan4Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.9 |
Fan 4th from the front failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan4FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.10 |
Fan 4th from the front is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan5Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.11 |
Fan 5th from the front failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan5FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.12 |
Fan 5th from the front is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan6Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.13 |
Fan nearest the back of the box failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDFan6FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.14 |
Fan nearest the back of the box is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDPwr1Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.15 |
Rightmost power supply failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDPwr1FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.16 |
Rightmost power supply is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDPwr2Fail |
1.3.6.1.4.1.4115.1.4.3.3.1.3.17 |
Leftmost power supply failed |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDPwr2FailClr |
1.3.6.1.4.1.4115.1.4.3.3.1.3.18 |
Leftmost power supply is working |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDTempOkay |
1.3.6.1.4.1.4115.1.4.3.3.1.3.19 |
System temperature is OK |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDTempBad |
1.3.6.1.4.1.4115.1.4.3.3.1.3.20 |
System temperature is too hot! |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDTempCritical |
1.3.6.1.4.1.4115.1.4.3.3.1.3.21 |
System temperature is critical!!!, CMTS will shut itself down!!!! |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dcxFPDGroups |
1.3.6.1.4.1.4115.1.4.3.3.1.4.2 |
OBJECT IDENTIFIER |
|
|
|
dcxFPDCompliance |
1.3.6.1.4.1.4115.1.4.3.3.1.4.1.1 |
The compliance statement for devices that implement Arris C3
compliant FPD features |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
dcxFPDMsgGroup |
1.3.6.1.4.1.4115.1.4.3.3.1.4.2.1 |
Arris C3 FPD message group |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
dcxFPDControlConfGroup |
1.3.6.1.4.1.4115.1.4.3.3.1.4.2.2 |
Arris C3 FPD Control group |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|