APTIS-CONFIG-MIB

File: APTIS-CONFIG-MIB.mib (626166 bytes)

Imported modules

APTIS-MIB APTIS-REG-MIB SNMPv2-SMI
SNMPv2-TC

Imported symbols

aptis-config Boolean aptis-modules
MODULE-IDENTITY OBJECT-TYPE IpAddress
DisplayString RowStatus

Defined Types

CallInfoEntry  
SEQUENCE    
  callInfoPathString DisplayString
  callInfoRowStatus RowStatus
  callInfoKeyValue INTEGER
  callInfoShelf INTEGER
  callInfoSlot INTEGER
  callInfoPort INTEGER
  callInfoDs0 INTEGER
  callInfoVpopId INTEGER
  callInfoCallType INTEGER
  callInfoFeature INTEGER
  callInfoCallingNumberType INTEGER
  callInfoCallingNumberPlan INTEGER
  callInfoCallingOptions INTEGER
  callInfoCallingNumber DisplayString
  callInfoCallingSubaddressType INTEGER
  callInfoCallingSubaddress DisplayString
  callInfoCalledNumberType INTEGER
  callInfoCalledNumberPlan INTEGER
  callInfoCalledOptions INTEGER
  callInfoCalledNumber DisplayString
  callInfoCalledSubaddressType INTEGER
  callInfoCalledSubaddress DisplayString
  callInfoCallBearerType INTEGER
  callInfoCallBearerRate INTEGER

CasConfigEntry  
SEQUENCE    
  casConfigPathString DisplayString
  casConfigRowStatus RowStatus
  casConfigKeyValue INTEGER
  casConfigSigBitType INTEGER
  casConfigR2Type INTEGER
  casConfigMaxCalledDigits INTEGER
  casConfigMaxCallingDigits INTEGER
  casConfigReqCallingNumber Boolean
  casConfigCallingNumberMandatory Boolean
  casConfigRingBack Boolean
  casConfigCdBits INTEGER
  casConfigAssumeAcceptCall Boolean
  casConfigOOS Boolean
  casConfigBusyOutOOS Boolean
  casConfigWinkAfterAnswer Boolean
  casConfigSkipCategoryRequest Boolean

CasTimersEntry  
SEQUENCE    
  casTimersPathString DisplayString
  casTimersRowStatus RowStatus
  casTimersKeyValue INTEGER
  casTimersHitThresh INTEGER
  casTimersInSeizeHold INTEGER
  casTimersOutSeizeHold INTEGER
  casTimersOutWaitSeizeAck INTEGER
  casTimersOutWaitConnect INTEGER
  casTimersOutConnectHold INTEGER
  casTimersLocalRelease INTEGER
  casTimersLineRelease INTEGER
  casTimersLineReleaseHold INTEGER
  casTimersRecover INTEGER
  casTimersWaitR2Digit INTEGER
  casTimersInWaitAccept INTEGER
  casTimersInWaitAnswer INTEGER
  casTimersOutWaitAnswer INTEGER
  casTimersInCongestionPulseDuration INTEGER
  casTimersInSetupCompleteHold INTEGER
  casTimersInAnswerToWinkDelay INTEGER
  casTimersInAfterAnswerWinkPulse INTEGER
  casTimersOutLineAbnormalReleaseHold INTEGER
  casTimersOutLocalReleaseDelay INTEGER

ClockRecoveryEntry  
SEQUENCE    
  clockRecoveryPathString DisplayString
  clockRecoveryRowStatus RowStatus
  clockRecoveryKeyValue INTEGER
  clockRecoveryPrimarySlot INTEGER
  clockRecoveryPrimaryPort INTEGER
  clockRecoverySecondarySlot INTEGER
  clockRecoverySecondaryPort INTEGER
  clockRecoveryPrimaryT3 INTEGER
  clockRecoverySecondaryT3 INTEGER

Ds0ConfigEntry  
SEQUENCE    
  ds0ConfigPathString DisplayString
  ds0ConfigRowStatus RowStatus
  ds0ConfigKeyValue INTEGER
  ds0ConfigAdminState INTEGER

E1ConfigEntry  
SEQUENCE    
  e1ConfigPathString DisplayString
  e1ConfigRowStatus RowStatus
  e1ConfigKeyValue INTEGER
  e1ConfigAdminState INTEGER
  e1ConfigLineFraming INTEGER
  e1ConfigLineCode INTEGER
  e1ConfigLineBuildout INTEGER
  e1ConfigSignaling INTEGER
  e1ConfigClockingPriority INTEGER
  e1ConfigLoopBack INTEGER
  e1ConfigDefaultNumber DisplayString
  e1ConfigOverrideNumber DisplayString
  e1ConfigCircuitID DisplayString
  e1ConfigAlarmCriteria INTEGER

E1TrunkconfigEntry  
SEQUENCE    
  e1TrunkconfigPathString DisplayString
  e1TrunkconfigRowStatus RowStatus
  e1TrunkconfigKeyValue INTEGER
  e1TrunkconfigAdminState INTEGER
  e1TrunkconfigClockSource INTEGER
  e1TrunkconfigLineFraming INTEGER
  e1TrunkconfigLineCode INTEGER
  e1TrunkconfigLineBuildout INTEGER

E1liuConfigEntry  
SEQUENCE    
  e1liuConfigPathString DisplayString
  e1liuConfigRowStatus RowStatus
  e1liuConfigKeyValue INTEGER
  e1liuConfigAdminState INTEGER
  e1liuConfigCircuitID DisplayString

HdlcConfigEntry  
SEQUENCE    
  hdlcConfigPathString DisplayString
  hdlcConfigRowStatus RowStatus
  hdlcConfigKeyValue INTEGER
  hdlcConfigStrategy INTEGER
  hdlcConfigConnectTimeout INTEGER

HSSIConfigEntry  
SEQUENCE    
  hSSIConfigPathString DisplayString
  hSSIConfigRowStatus RowStatus
  hSSIConfigKeyValue INTEGER
  hSSIConfigHSSIPhyPort INTEGER
  hSSIConfigHSSIEnable INTEGER
  hSSIConfigHSSIName DisplayString
  hSSIConfigHSSIDelineation Boolean
  hSSIConfigHSSICRCType INTEGER
  hSSIConfigHSSIIdle INTEGER
  hSSIConfigHSSILoopback INTEGER
  hSSIConfigHSSIClock INTEGER
  hSSIConfigHSSIQueueDepth INTEGER

CHdlcEntry  
SEQUENCE    
  cHdlcPathString DisplayString
  cHdlcRowStatus RowStatus
  cHdlcKeyValue INTEGER
  cHdlcIpAddr IpAddress
  cHdlcIpMask IpAddress
  cHdlcMaxMissedKeepalives INTEGER
  cHdlcMaxLoopCount INTEGER

IpCleartcpEntry  
SEQUENCE    
  ipCleartcpPathString DisplayString
  ipCleartcpRowStatus RowStatus
  ipCleartcpKeyValue INTEGER
  ipCleartcpLocalIp IpAddress
  ipCleartcpLocalPort INTEGER
  ipCleartcpLocalPortAllocated Boolean
  ipCleartcpRemoteHostname DisplayString
  ipCleartcpRemotePort INTEGER
  ipCleartcpConnectType INTEGER
  ipCleartcpTcpConnectTimeout INTEGER
  ipCleartcpHostIpCount INTEGER
  ipCleartcpHostIpList DisplayString

IpRtrConfigEntry  
SEQUENCE    
  ipRtrConfigPathString DisplayString
  ipRtrConfigRowStatus RowStatus
  ipRtrConfigKeyValue INTEGER
  ipRtrConfigRoutingEnabled Boolean
  ipRtrConfigMulticastEnabled Boolean
  ipRtrConfigDefaultTtl INTEGER
  ipRtrConfigArpTtl INTEGER
  ipRtrConfigSpoofCheckEnabled Boolean
  ipRtrConfigChecksumEnabled Boolean
  ipRtrConfigSourceRouteEnabled Boolean
  ipRtrConfigRouterDiscovery INTEGER
  ipRtrConfigSnmpSysDesc DisplayString
  ipRtrConfigSnmpContactName DisplayString
  ipRtrConfigSnmpSysName DisplayString
  ipRtrConfigSnmpSysLocation DisplayString
  ipRtrConfigSessionUnwindsMax INTEGER
  ipRtrConfigTrunkUnwindsMax INTEGER
  ipRtrConfigRouteCacheEnabled Boolean

IpMulticastConfigEntry  
SEQUENCE    
  ipMulticastConfigPathString DisplayString
  ipMulticastConfigRowStatus RowStatus
  ipMulticastConfigKeyValue INTEGER
  ipMulticastConfigTrunkRoutingEnabled Boolean
  ipMulticastConfigHeartbeatEnabled Boolean
  ipMulticastConfigHeartbeatGroup IpAddress
  ipMulticastConfigHeartbeatPort INTEGER
  ipMulticastConfigHeartbeatTimeout INTEGER
  ipMulticastConfigHeartbeatSource IpAddress
  ipMulticastConfigHeartbeatSourceMask IpAddress
  ipMulticastConfigHeartbeatThreshold INTEGER
  ipMulticastConfigHeartbeatPeriod INTEGER

IpVrouterConfigEntry  
SEQUENCE    
  ipVrouterConfigPathString DisplayString
  ipVrouterConfigRowStatus RowStatus
  ipVrouterConfigKeyValue INTEGER
  ipVrouterConfigRouterType INTEGER
  ipVrouterConfigTrunkingType INTEGER

IpPolicyEntryEntry  
SEQUENCE    
  ipPolicyEntryPathString DisplayString
  ipPolicyEntryRowStatus RowStatus
  ipPolicyEntryKeyValue INTEGER
  ipPolicyEntryAccessList INTEGER
  ipPolicyEntryForceVrouterId INTEGER
  ipPolicyEntryForceDestinationIp IpAddress

IpRipTrustedEntry  
SEQUENCE    
  ipRipTrustedPathString DisplayString
  ipRipTrustedRowStatus RowStatus
  ipRipTrustedKeyValue INTEGER
  ipRipTrustedTrustedHost IpAddress

IpRipEntry  
SEQUENCE    
  ipRipPathString DisplayString
  ipRipRowStatus RowStatus
  ipRipKeyValue INTEGER
  ipRipProtoV1Enabled Boolean
  ipRipProtoV2Enabled Boolean
  ipRipTriggeredUpdatesEnabled Boolean
  ipRipAuthType INTEGER
  ipRipAuthKey DisplayString

IpOspfAreaEntry  
SEQUENCE    
  ipOspfAreaPathString DisplayString
  ipOspfAreaRowStatus RowStatus
  ipOspfAreaKeyValue INTEGER
  ipOspfAreaAreaId IpAddress
  ipOspfAreaStubAreaEnabled Boolean
  ipOspfAreaNotSoStubbyAreaEnabled Boolean
  ipOspfAreaStubAreaDefaultCost INTEGER
  ipOspfAreaStubAreaNoSummaryEnabled Boolean

IpOspfVirtualLinkEntry  
SEQUENCE    
  ipOspfVirtualLinkPathString DisplayString
  ipOspfVirtualLinkRowStatus RowStatus
  ipOspfVirtualLinkKeyValue INTEGER
  ipOspfVirtualLinkAreaId IpAddress
  ipOspfVirtualLinkRouterId IpAddress
  ipOspfVirtualLinkIpAddress IpAddress
  ipOspfVirtualLinkNextRouteripAddress IpAddress
  ipOspfVirtualLinkTransitAreaId IpAddress
  ipOspfVirtualLinkHelloInterval INTEGER
  ipOspfVirtualLinkDeadInterval INTEGER
  ipOspfVirtualLinkRetransmitInterval INTEGER
  ipOspfVirtualLinkTransmitDelay INTEGER
  ipOspfVirtualLinkAuthType INTEGER
  ipOspfVirtualLinkAuthKey DisplayString

IpOspfRangeEntry  
SEQUENCE    
  ipOspfRangePathString DisplayString
  ipOspfRangeRowStatus RowStatus
  ipOspfRangeKeyValue INTEGER
  ipOspfRangeAddress IpAddress
  ipOspfRangeMask IpAddress
  ipOspfRangeAreaId IpAddress
  ipOspfRangeAdvertise Boolean
  ipOspfRangeType INTEGER

IpOspfEntry  
SEQUENCE    
  ipOspfPathString DisplayString
  ipOspfRowStatus RowStatus
  ipOspfKeyValue INTEGER
  ipOspfRouterId IpAddress
  ipOspfAutoVirtualLinkEnabled Boolean
  ipOspfTosEnabled Boolean
  ipOspfAsBorderEnabled Boolean
  ipOspfMaxPaths INTEGER
  ipOspfSpfDelayBeforeRecalc INTEGER
  ipOspfSpfHoldtimeMinBetweenRecalc INTEGER
  ipOspfGenerateDefaultEnabled Boolean
  ipOspfGenerateDefaultMetric Boolean
  ipOspfGenerateDefaultMetricType Boolean
  ipOspfStrategy INTEGER

IpVpnGroupDestEntry  
SEQUENCE    
  ipVpnGroupDestPathString DisplayString
  ipVpnGroupDestRowStatus RowStatus
  ipVpnGroupDestKeyValue INTEGER
  ipVpnGroupDestVpnId INTEGER
  ipVpnGroupDestDlci INTEGER
  ipVpnGroupDestIpPrefix IpAddress
  ipVpnGroupDestIpMask IpAddress

IpVpnGroupEntry  
SEQUENCE    
  ipVpnGroupPathString DisplayString
  ipVpnGroupRowStatus RowStatus
  ipVpnGroupKeyValue INTEGER
  ipVpnGroupType INTEGER
  ipVpnGroupVpnId INTEGER
  ipVpnGroupFrDlciMapCount INTEGER
  ipVpnGroupFrDlciMap1 IpAddress
  ipVpnGroupFrDlciMap2 IpAddress
  ipVpnGroupFrDlciMap3 IpAddress
  ipVpnGroupFrDlciMap4 IpAddress
  ipVpnGroupFrDlciMap5 IpAddress

IpAccessListEntry  
SEQUENCE    
  ipAccessListPathString DisplayString
  ipAccessListRowStatus RowStatus
  ipAccessListKeyValue INTEGER
  ipAccessListId INTEGER
  ipAccessListMode INTEGER
  ipAccessListProtocol INTEGER
  ipAccessListSourceIp IpAddress
  ipAccessListSourceMask IpAddress
  ipAccessListDestinationIp IpAddress
  ipAccessListDestinationMask IpAddress
  ipAccessListCompare INTEGER
  ipAccessListDestinationPort INTEGER
  ipAccessListIcmpType INTEGER
  ipAccessListIcmpCode INTEGER
  ipAccessListIgmpType INTEGER
  ipAccessListTcpFlag INTEGER

IpFilterListEntry  
SEQUENCE    
  ipFilterListPathString DisplayString
  ipFilterListRowStatus RowStatus
  ipFilterListKeyValue INTEGER
  ipFilterListName OCTET STRING
  ipFilterListInputAccessListId INTEGER
  ipFilterListOutputAccessListId INTEGER

IpIfnumberEntry  
SEQUENCE    
  ipIfnumberPathString DisplayString
  ipIfnumberRowStatus RowStatus
  ipIfnumberKeyValue INTEGER
  ipIfnumberIfIndex INTEGER
  ipIfnumberClass INTEGER
  ipIfnumberSubclass INTEGER
  ipIfnumberInstance INTEGER

IpCircuitEntry  
SEQUENCE    
  ipCircuitPathString DisplayString
  ipCircuitRowStatus RowStatus
  ipCircuitKeyValue INTEGER
  ipCircuitType INTEGER
  ipCircuitIfIndex INTEGER
  ipCircuitDescription OCTET STRING
  ipCircuitMtu INTEGER
  ipCircuitSpeed INTEGER
  ipCircuitNumbered Boolean
  ipCircuitIpLocal IpAddress
  ipCircuitIpRemote IpAddress
  ipCircuitIpMask IpAddress
  ipCircuitArpResponseEnabled Boolean
  ipCircuitArpProxyEnabled Boolean
  ipCircuitAdvertiseRoute Boolean
  ipCircuitOutputQueueMaxDepth INTEGER
  ipCircuitOutputEnqueueStyle INTEGER
  ipCircuitOutputDequeueStyle INTEGER
  ipCircuitRipV1Enabled Boolean
  ipCircuitRipV2Enabled Boolean
  ipCircuitRipSendEnabled Boolean
  ipCircuitRipRecvEnabled Boolean
  ipCircuitRipPoisonReverseEnabled Boolean
  ipCircuitRipInflateMetric INTEGER
  ipCircuitRipSendAccessListId INTEGER
  ipCircuitOspfEnabled Boolean
  ipCircuitOspfAreaId IpAddress
  ipCircuitOspfCost INTEGER
  ipCircuitOspfPriority INTEGER
  ipCircuitOspfHelloInterval INTEGER
  ipCircuitOspfDeadInterval INTEGER
  ipCircuitOspfRetransmitInterval INTEGER
  ipCircuitOspfTransmitDelay INTEGER
  ipCircuitOspfPollInterval INTEGER
  ipCircuitOspfAuthType INTEGER
  ipCircuitOspfAuthKey DisplayString
  ipCircuitMulticastEnabled Boolean
  ipCircuitMulticastProtocol INTEGER
  ipCircuitInverseArpEnabled Boolean
  ipCircuitGratuitousArpEnabled Boolean

IpRouteEntry  
SEQUENCE    
  ipRoutePathString DisplayString
  ipRouteRowStatus RowStatus
  ipRouteKeyValue INTEGER
  ipRoutePrefix IpAddress
  ipRouteMask IpAddress
  ipRouteLocalGateway IpAddress
  ipRouteLocalIfIndex INTEGER
  ipRouteDefaultFlag Boolean
  ipRoutePrivateFlag Boolean
  ipRouteRipCost INTEGER
  ipRoutePreference INTEGER
  ipRouteStrategy INTEGER

IpArpEntry  
SEQUENCE    
  ipArpPathString DisplayString
  ipArpRowStatus RowStatus
  ipArpKeyValue INTEGER
  ipArpIfIndex INTEGER
  ipArpIpDestination IpAddress
  ipArpPhysDest DisplayString
  ipArpPublishFlag Boolean

IpAccessGroupEntry  
SEQUENCE    
  ipAccessGroupPathString DisplayString
  ipAccessGroupRowStatus RowStatus
  ipAccessGroupKeyValue INTEGER
  ipAccessGroupIfIndex INTEGER
  ipAccessGroupAccessListId INTEGER
  ipAccessGroupDirection INTEGER

IpOspfNbNeighborEntry  
SEQUENCE    
  ipOspfNbNeighborPathString DisplayString
  ipOspfNbNeighborRowStatus RowStatus
  ipOspfNbNeighborKeyValue INTEGER
  ipOspfNbNeighborIfIndex INTEGER
  ipOspfNbNeighborIpAddress IpAddress
  ipOspfNbNeighborDrEligibleEnabled Boolean

IpOspfMd5KeyEntry  
SEQUENCE    
  ipOspfMd5KeyPathString DisplayString
  ipOspfMd5KeyRowStatus RowStatus
  ipOspfMd5KeyKeyValue INTEGER
  ipOspfMd5KeyIfIndex INTEGER
  ipOspfMd5KeyAreaId IpAddress
  ipOspfMd5KeyMd5KeyId INTEGER
  ipOspfMd5KeyMd5Key DisplayString

IpFrMapEntry  
SEQUENCE    
  ipFrMapPathString DisplayString
  ipFrMapRowStatus RowStatus
  ipFrMapKeyValue INTEGER
  ipFrMapIfIndex INTEGER
  ipFrMapIpDestination IpAddress
  ipFrMapDlci INTEGER
  ipFrMapInterfaceFlag Boolean
  ipFrMapBroadcastFlag Boolean
  ipFrMapMulticastFlag Boolean

IpServicesConfigEntry  
SEQUENCE    
  ipServicesConfigPathString DisplayString
  ipServicesConfigRowStatus RowStatus
  ipServicesConfigKeyValue INTEGER
  ipServicesConfigMgmtAddr IpAddress
  ipServicesConfigAccessListId INTEGER
  ipServicesConfigAuthMethod INTEGER
  ipServicesConfigDefaultLevel INTEGER
  ipServicesConfigDefaultModifyUserEntries Boolean
  ipServicesConfigDefaultModifyConfig Boolean
  ipServicesConfigDefaultAllowFTP Boolean
  ipServicesConfigDefaultAllowTelnet Boolean
  ipServicesConfigDefaultLevel0DisconnectUsers Boolean
  ipServicesConfigUseIPSvcDefaults Boolean
  ipServicesConfigModifyPasswords Boolean
  ipServicesConfigDefaultAllowRLogin Boolean
  ipServicesConfigDefaultAllowRSh Boolean

IpSvcEntryEntry  
SEQUENCE    
  ipSvcEntryPathString DisplayString
  ipSvcEntryRowStatus RowStatus
  ipSvcEntryKeyValue INTEGER
  ipSvcEntryService INTEGER
  ipSvcEntryAdminStatus INTEGER
  ipSvcEntryRestricted Boolean

IpSvcAuthEntryEntry  
SEQUENCE    
  ipSvcAuthEntryPathString DisplayString
  ipSvcAuthEntryRowStatus RowStatus
  ipSvcAuthEntryKeyValue INTEGER
  ipSvcAuthEntryUsername DisplayString
  ipSvcAuthEntryPassword DisplayString
  ipSvcAuthEntryLevel INTEGER
  ipSvcAuthEntryModifyUserEntries Boolean
  ipSvcAuthEntryModifyConfig Boolean
  ipSvcAuthEntryAllowFTP Boolean
  ipSvcAuthEntryAllowTelnet Boolean
  ipSvcAuthEntryLevel0DisconnectUsers Boolean
  ipSvcAuthEntryModifyPasswords Boolean
  ipSvcAuthEntryAllowRLogin Boolean
  ipSvcAuthEntryAllowRSh Boolean

IpAaaGroupConfigEntry  
SEQUENCE    
  ipAaaGroupConfigPathString DisplayString
  ipAaaGroupConfigRowStatus RowStatus
  ipAaaGroupConfigKeyValue INTEGER
  ipAaaGroupConfigName DisplayString
  ipAaaGroupConfigParallelServers Boolean

IpAaaSetConfigEntry  
SEQUENCE    
  ipAaaSetConfigPathString DisplayString
  ipAaaSetConfigRowStatus RowStatus
  ipAaaSetConfigKeyValue INTEGER
  ipAaaSetConfigName DisplayString
  ipAaaSetConfigMode INTEGER
  ipAaaSetConfigFakeResponse Boolean

IpAaaServerEntry  
SEQUENCE    
  ipAaaServerPathString DisplayString
  ipAaaServerRowStatus RowStatus
  ipAaaServerKeyValue INTEGER
  ipAaaServerIndex INTEGER
  ipAaaServerType INTEGER
  ipAaaServerIpAddr IpAddress
  ipAaaServerIpPort INTEGER
  ipAaaServerTimeout INTEGER
  ipAaaServerRetries INTEGER
  ipAaaServerKey DisplayString
  ipAaaServerTrace Boolean
  ipAaaServerMonitorTimeout INTEGER
  ipAaaServerMonitorType INTEGER
  ipAaaServerMonitorUsername DisplayString
  ipAaaServerMonitorPassword DisplayString

IpAaaClientPortEntry  
SEQUENCE    
  ipAaaClientPortPathString DisplayString
  ipAaaClientPortRowStatus RowStatus
  ipAaaClientPortKeyValue INTEGER
  ipAaaClientPortStartingPort INTEGER
  ipAaaClientPortPortCount INTEGER

IpAaaRadiusConfigEntry  
SEQUENCE    
  ipAaaRadiusConfigPathString DisplayString
  ipAaaRadiusConfigRowStatus RowStatus
  ipAaaRadiusConfigKeyValue INTEGER
  ipAaaRadiusConfigNasId DisplayString
  ipAaaRadiusConfigNasPortStyle INTEGER
  ipAaaRadiusConfigSessionIdStyle INTEGER
  ipAaaRadiusConfigSessionIdSize INTEGER
  ipAaaRadiusConfigVendorSpecId INTEGER
  ipAaaRadiusConfigVendorSpecMultilink Boolean
  ipAaaRadiusConfigAdditionalAuthEnabled Boolean
  ipAaaRadiusConfigModemAcctEnabled Boolean
  ipAaaRadiusConfigTerminateComponentEnabled Boolean
  ipAaaRadiusConfigTier1Enable INTEGER

IpDnsEntry  
SEQUENCE    
  ipDnsPathString DisplayString
  ipDnsRowStatus RowStatus
  ipDnsKeyValue INTEGER
  ipDnsDefDomain DisplayString
  ipDnsTimeout INTEGER
  ipDnsRetry INTEGER

IpDnsNsEntry  
SEQUENCE    
  ipDnsNsPathString DisplayString
  ipDnsNsRowStatus RowStatus
  ipDnsNsKeyValue INTEGER
  ipDnsNsIpAddr IpAddress

IpSyslogEntry  
SEQUENCE    
  ipSyslogPathString DisplayString
  ipSyslogRowStatus RowStatus
  ipSyslogKeyValue INTEGER
  ipSyslogDebugFlag INTEGER
  ipSyslogIpAddr IpAddress
  ipSyslogIpPort INTEGER
  ipSyslogPriority INTEGER
  ipSyslogFacility INTEGER
  ipSyslogFilterLevel INTEGER

IpSntpEntry  
SEQUENCE    
  ipSntpPathString DisplayString
  ipSntpRowStatus RowStatus
  ipSntpKeyValue INTEGER
  ipSntpUpdateFrequency INTEGER
  ipSntpMasterClockAddr IpAddress
  ipSntpAdjustment INTEGER
  ipSntpAdjSign INTEGER

IpShellEntry  
SEQUENCE    
  ipShellPathString DisplayString
  ipShellRowStatus RowStatus
  ipShellKeyValue INTEGER
  ipShellBannerMsg DisplayString
  ipShellBasePrompt DisplayString
  ipShellLoginPrompt DisplayString
  ipShellPasswdPrompt DisplayString
  ipShellBadPasswdMsg DisplayString

IpSnmpEntry  
SEQUENCE    
  ipSnmpPathString DisplayString
  ipSnmpRowStatus RowStatus
  ipSnmpKeyValue INTEGER
  ipSnmpDebugFlag INTEGER
  ipSnmpLogFlag INTEGER
  ipSnmpReadCommunity DisplayString
  ipSnmpWriteEnabled Boolean
  ipSnmpWriteCommunity DisplayString
  ipSnmpMaxSnmpLoad INTEGER

IpTrapCfgEntry  
SEQUENCE    
  ipTrapCfgPathString DisplayString
  ipTrapCfgRowStatus RowStatus
  ipTrapCfgKeyValue INTEGER
  ipTrapCfgPriority INTEGER
  ipTrapCfgIpPort INTEGER
  ipTrapCfgIpAddr IpAddress
  ipTrapCfgCommunityStr OCTET STRING
  ipTrapCfgVerTrapType INTEGER
  ipTrapCfgAuthTrapStatus INTEGER
  ipTrapCfgMacModemsThresholdTrapStatus INTEGER
  ipTrapCfgTotalModemsThresholdTrapStatus INTEGER
  ipTrapCfgLocalPswdChangeTrapStatus INTEGER
  ipTrapCfgAcctServerTrapStatus INTEGER
  ipTrapCfgSs7GatewayTrapStatus INTEGER
  ipTrapCfgTunnelTrapStatus INTEGER
  ipTrapCfgDs3FailoverTrapStatus INTEGER
  ipTrapCfgSccFailoverTrapStatus INTEGER
  ipTrapCfgEthernetPortTrapStatus INTEGER
  ipTrapCfgHssiPortTrapStatus INTEGER
  ipTrapCfgRemoteAuthTrapStatus INTEGER
  ipTrapCfgLocalAuthFailThresholdTrapStatus INTEGER
  ipTrapCfgRemoteAuthPacketDiscardTrapStatus INTEGER
  ipTrapCfgIsdnTrapStatus INTEGER
  ipTrapCfgFilterErrorTrapStatus INTEGER
  ipTrapCfgDhcpTrapStatus INTEGER
  ipTrapCfgSccTrapStatus INTEGER
  ipTrapCfgGenericLinkTrapStatus INTEGER
  ipTrapCfgRadiusdTrapStatus INTEGER

IpDsmccEntry  
SEQUENCE    
  ipDsmccPathString DisplayString
  ipDsmccRowStatus RowStatus
  ipDsmccKeyValue INTEGER
  ipDsmccDebugFlag INTEGER
  ipDsmccLogFlag INTEGER

IpSgcpEntry  
SEQUENCE    
  ipSgcpPathString DisplayString
  ipSgcpRowStatus RowStatus
  ipSgcpKeyValue INTEGER
  ipSgcpDebugFlag INTEGER
  ipSgcpLogFlag INTEGER

IpIpdcEntry  
SEQUENCE    
  ipIpdcPathString DisplayString
  ipIpdcRowStatus RowStatus
  ipIpdcKeyValue INTEGER
  ipIpdcDebugFlag INTEGER
  ipIpdcLogFlag INTEGER

IpSsEntry  
SEQUENCE    
  ipSsPathString DisplayString
  ipSsRowStatus RowStatus
  ipSsKeyValue INTEGER
  ipSsDebugFlag INTEGER
  ipSsLogFlag INTEGER

IpRshellConfigEntry  
SEQUENCE    
  ipRshellConfigPathString DisplayString
  ipRshellConfigRowStatus RowStatus
  ipRshellConfigKeyValue INTEGER
  ipRshellConfigForceAddressValidation Boolean

IpRhostEntryEntry  
SEQUENCE    
  ipRhostEntryPathString DisplayString
  ipRhostEntryRowStatus RowStatus
  ipRhostEntryKeyValue INTEGER
  ipRhostEntryLocalUser DisplayString
  ipRhostEntryRemoteUser DisplayString
  ipRhostEntryRemoteHost OCTET STRING
  ipRhostEntryAllowRsh Boolean
  ipRhostEntryAllowRlogin Boolean

IpRloginEntry  
SEQUENCE    
  ipRloginPathString DisplayString
  ipRloginRowStatus RowStatus
  ipRloginKeyValue INTEGER
  ipRloginTcpPort INTEGER

IpRshEntry  
SEQUENCE    
  ipRshPathString DisplayString
  ipRshRowStatus RowStatus
  ipRshKeyValue INTEGER
  ipRshTcpPort INTEGER

IpAaaRadiusdConfigEntry  
SEQUENCE    
  ipAaaRadiusdConfigPathString DisplayString
  ipAaaRadiusdConfigRowStatus RowStatus
  ipAaaRadiusdConfigKeyValue INTEGER
  ipAaaRadiusdConfigStatus INTEGER
  ipAaaRadiusdConfigPort INTEGER

IpAaaRadiusClientEntry  
SEQUENCE    
  ipAaaRadiusClientPathString DisplayString
  ipAaaRadiusClientRowStatus RowStatus
  ipAaaRadiusClientKeyValue INTEGER
  ipAaaRadiusClientIndex INTEGER
  ipAaaRadiusClientIpAddr IpAddress
  ipAaaRadiusClientVpopId INTEGER
  ipAaaRadiusClientSecret DisplayString
  ipAaaRadiusClientStatus INTEGER
  ipAaaRadiusClientTrace Boolean
  ipAaaRadiusClientRequiredAttribute INTEGER

InboundPolicyEntry  
SEQUENCE    
  inboundPolicyPathString DisplayString
  inboundPolicyRowStatus RowStatus
  inboundPolicyKeyValue INTEGER
  inboundPolicyCommit INTEGER
  inboundPolicyPolicy INTEGER

OutboundPolicyEntry  
SEQUENCE    
  outboundPolicyPathString DisplayString
  outboundPolicyRowStatus RowStatus
  outboundPolicyKeyValue INTEGER
  outboundPolicyCommit INTEGER
  outboundPolicyPolicy INTEGER

InboundSpdbEntry  
SEQUENCE    
  inboundSpdbPathString DisplayString
  inboundSpdbRowStatus RowStatus
  inboundSpdbKeyValue INTEGER
  inboundSpdbCommit INTEGER
  inboundSpdbSelector IpAddress
  inboundSpdbPolicy INTEGER
  inboundSpdbIpsecGwAddr IpAddress
  inboundSpdbSpi INTEGER
  inboundSpdbIpsecProtocol INTEGER

OutboundSpdbEntry  
SEQUENCE    
  outboundSpdbPathString DisplayString
  outboundSpdbRowStatus RowStatus
  outboundSpdbKeyValue INTEGER
  outboundSpdbCommit INTEGER
  outboundSpdbSelector IpAddress
  outboundSpdbPolicy INTEGER
  outboundSpdbIpsecGwAddr IpAddress
  outboundSpdbSpi INTEGER
  outboundSpdbIpsecProtocol INTEGER

InboundSadbEntry  
SEQUENCE    
  inboundSadbPathString DisplayString
  inboundSadbRowStatus RowStatus
  inboundSadbKeyValue INTEGER
  inboundSadbCommit INTEGER
  inboundSadbIpAddr IpAddress
  inboundSadbSpi INTEGER
  inboundSadbIpsecProtocol INTEGER
  inboundSadbAhMacAlg INTEGER
  inboundSadbAhMacLength INTEGER
  inboundSadbAhMacKeyLength INTEGER
  inboundSadbAhMacKey OCTET STRING
  inboundSadbEspMacAlg INTEGER
  inboundSadbEspMacLength INTEGER
  inboundSadbEspMacKeyLength INTEGER
  inboundSadbEspMacKey OCTET STRING
  inboundSadbEspEncAlg INTEGER
  inboundSadbEspEncKeyLength INTEGER
  inboundSadbEspEncKey OCTET STRING
  inboundSadbIpsecMode INTEGER
  inboundSadbNextEncapIpAddr IpAddress
  inboundSadbNextEncapSpi INTEGER
  inboundSadbNextEncapIpsecProtocol INTEGER

OutboundSadbEntry  
SEQUENCE    
  outboundSadbPathString DisplayString
  outboundSadbRowStatus RowStatus
  outboundSadbKeyValue INTEGER
  outboundSadbCommit INTEGER
  outboundSadbIpAddr IpAddress
  outboundSadbSpi INTEGER
  outboundSadbIpsecProtocol INTEGER
  outboundSadbAhMacAlg INTEGER
  outboundSadbAhMacLength INTEGER
  outboundSadbAhMacKeyLength INTEGER
  outboundSadbAhMacKey OCTET STRING
  outboundSadbEspMacAlg INTEGER
  outboundSadbEspMacLength INTEGER
  outboundSadbEspMacKeyLength INTEGER
  outboundSadbEspMacKey OCTET STRING
  outboundSadbEspEncAlg INTEGER
  outboundSadbEspEncKeyLength INTEGER
  outboundSadbEspEncKey OCTET STRING
  outboundSadbIpsecMode INTEGER
  outboundSadbNextEncapIpAddr IpAddress
  outboundSadbNextEncapSpi INTEGER
  outboundSadbNextEncapIpsecProtocol INTEGER

StatsDummyEntry  
SEQUENCE    
  statsDummyPathString DisplayString
  statsDummyRowStatus RowStatus
  statsDummyKeyValue INTEGER
  statsDummyCommit INTEGER

VmsConfigEntry  
SEQUENCE    
  vmsConfigPathString DisplayString
  vmsConfigRowStatus RowStatus
  vmsConfigKeyValue INTEGER
  vmsConfigCommit INTEGER
  vmsConfigChipStateMask INTEGER

IpDsbyteEntry  
SEQUENCE    
  ipDsbytePathString DisplayString
  ipDsbyteRowStatus RowStatus
  ipDsbyteKeyValue INTEGER
  ipDsbyteDSByteEnabled Boolean
  ipDsbyteDSByteValue INTEGER

IpPoolConfigEntry  
SEQUENCE    
  ipPoolConfigPathString DisplayString
  ipPoolConfigRowStatus RowStatus
  ipPoolConfigKeyValue INTEGER
  ipPoolConfigPrivate Boolean

IpAddressBlockEntry  
SEQUENCE    
  ipAddressBlockPathString DisplayString
  ipAddressBlockRowStatus RowStatus
  ipAddressBlockKeyValue INTEGER
  ipAddressBlockStart IpAddress
  ipAddressBlockCount INTEGER
  ipAddressBlockMask IpAddress
  ipAddressBlockRangeInUse Boolean
  ipAddressBlockAdminStatus INTEGER

ISDNConfigEntry  
SEQUENCE    
  iSDNConfigPathString DisplayString
  iSDNConfigRowStatus RowStatus
  iSDNConfigKeyValue INTEGER
  iSDNConfigDirection INTEGER
  iSDNConfigSwitchType INTEGER
  iSDNConfigNFAS INTEGER
  iSDNConfigNFASInterface INTEGER
  iSDNConfigNFASID INTEGER
  iSDNConfigSendService INTEGER
  iSDNConfigForceService INTEGER
  iSDNConfigIIDEncoding INTEGER

ISDNLayer2TimersEntry  
SEQUENCE    
  iSDNLayer2TimersPathString DisplayString
  iSDNLayer2TimersRowStatus RowStatus
  iSDNLayer2TimersKeyValue INTEGER
  iSDNLayer2TimersT200 INTEGER
  iSDNLayer2TimersT203 INTEGER
  iSDNLayer2TimersT204 INTEGER
  iSDNLayer2TimersN201 INTEGER
  iSDNLayer2TimersN204 INTEGER
  iSDNLayer2TimersK INTEGER

ISDNLayer2TimersAtt5essEntry  
SEQUENCE    
  iSDNLayer2TimersAtt5essPathString DisplayString
  iSDNLayer2TimersAtt5essRowStatus RowStatus
  iSDNLayer2TimersAtt5essKeyValue INTEGER
  iSDNLayer2TimersAtt5essT200 INTEGER
  iSDNLayer2TimersAtt5essT203 INTEGER
  iSDNLayer2TimersAtt5essT204 INTEGER
  iSDNLayer2TimersAtt5essN201 INTEGER
  iSDNLayer2TimersAtt5essN204 INTEGER
  iSDNLayer2TimersAtt5essK INTEGER

ISDNLayer3TimersEntry  
SEQUENCE    
  iSDNLayer3TimersPathString DisplayString
  iSDNLayer3TimersRowStatus RowStatus
  iSDNLayer3TimersKeyValue INTEGER
  iSDNLayer3TimersT302 INTEGER
  iSDNLayer3TimersT303 INTEGER
  iSDNLayer3TimersT304 INTEGER
  iSDNLayer3TimersT305 INTEGER
  iSDNLayer3TimersT306 INTEGER
  iSDNLayer3TimersT308 INTEGER
  iSDNLayer3TimersT309 INTEGER
  iSDNLayer3TimersT310 INTEGER
  iSDNLayer3TimersT312 INTEGER
  iSDNLayer3TimersT313 INTEGER
  iSDNLayer3TimersT316 INTEGER
  iSDNLayer3TimersT318 INTEGER
  iSDNLayer3TimersT319 INTEGER
  iSDNLayer3TimersT321 INTEGER
  iSDNLayer3TimersT322 INTEGER
  iSDNLayer3TimersT3m1 INTEGER

ISDNLayer3TimersAtt4essEntry  
SEQUENCE    
  iSDNLayer3TimersAtt4essPathString DisplayString
  iSDNLayer3TimersAtt4essRowStatus RowStatus
  iSDNLayer3TimersAtt4essKeyValue INTEGER
  iSDNLayer3TimersAtt4essT302 INTEGER
  iSDNLayer3TimersAtt4essT303 INTEGER
  iSDNLayer3TimersAtt4essT304 INTEGER
  iSDNLayer3TimersAtt4essT305 INTEGER
  iSDNLayer3TimersAtt4essT306 INTEGER
  iSDNLayer3TimersAtt4essT308 INTEGER
  iSDNLayer3TimersAtt4essT309 INTEGER
  iSDNLayer3TimersAtt4essT310 INTEGER
  iSDNLayer3TimersAtt4essT312 INTEGER
  iSDNLayer3TimersAtt4essT313 INTEGER
  iSDNLayer3TimersAtt4essT316 INTEGER
  iSDNLayer3TimersAtt4essT318 INTEGER
  iSDNLayer3TimersAtt4essT319 INTEGER
  iSDNLayer3TimersAtt4essT321 INTEGER
  iSDNLayer3TimersAtt4essT322 INTEGER
  iSDNLayer3TimersAtt4essT3m1 INTEGER

ISDNLayer3TimersAtt5essEntry  
SEQUENCE    
  iSDNLayer3TimersAtt5essPathString DisplayString
  iSDNLayer3TimersAtt5essRowStatus RowStatus
  iSDNLayer3TimersAtt5essKeyValue INTEGER
  iSDNLayer3TimersAtt5essT302 INTEGER
  iSDNLayer3TimersAtt5essT303 INTEGER
  iSDNLayer3TimersAtt5essT304 INTEGER
  iSDNLayer3TimersAtt5essT305 INTEGER
  iSDNLayer3TimersAtt5essT306 INTEGER
  iSDNLayer3TimersAtt5essT308 INTEGER
  iSDNLayer3TimersAtt5essT309 INTEGER
  iSDNLayer3TimersAtt5essT310 INTEGER
  iSDNLayer3TimersAtt5essT312 INTEGER
  iSDNLayer3TimersAtt5essT313 INTEGER
  iSDNLayer3TimersAtt5essT316 INTEGER
  iSDNLayer3TimersAtt5essT318 INTEGER
  iSDNLayer3TimersAtt5essT319 INTEGER
  iSDNLayer3TimersAtt5essT321 INTEGER
  iSDNLayer3TimersAtt5essT322 INTEGER
  iSDNLayer3TimersAtt5essT3m1 INTEGER

ISDNLayer3TimersNtiDmsEntry  
SEQUENCE    
  iSDNLayer3TimersNtiDmsPathString DisplayString
  iSDNLayer3TimersNtiDmsRowStatus RowStatus
  iSDNLayer3TimersNtiDmsKeyValue INTEGER
  iSDNLayer3TimersNtiDmsT302 INTEGER
  iSDNLayer3TimersNtiDmsT303 INTEGER
  iSDNLayer3TimersNtiDmsT304 INTEGER
  iSDNLayer3TimersNtiDmsT305 INTEGER
  iSDNLayer3TimersNtiDmsT306 INTEGER
  iSDNLayer3TimersNtiDmsT308 INTEGER
  iSDNLayer3TimersNtiDmsT309 INTEGER
  iSDNLayer3TimersNtiDmsT310 INTEGER
  iSDNLayer3TimersNtiDmsT312 INTEGER
  iSDNLayer3TimersNtiDmsT313 INTEGER
  iSDNLayer3TimersNtiDmsT316 INTEGER
  iSDNLayer3TimersNtiDmsT318 INTEGER
  iSDNLayer3TimersNtiDmsT319 INTEGER
  iSDNLayer3TimersNtiDmsT321 INTEGER
  iSDNLayer3TimersNtiDmsT322 INTEGER
  iSDNLayer3TimersNtiDmsT3m1 INTEGER

ISDNLayer3TimersNet5Entry  
SEQUENCE    
  iSDNLayer3TimersNet5PathString DisplayString
  iSDNLayer3TimersNet5RowStatus RowStatus
  iSDNLayer3TimersNet5KeyValue INTEGER
  iSDNLayer3TimersNet5T302 INTEGER
  iSDNLayer3TimersNet5T303 INTEGER
  iSDNLayer3TimersNet5T304 INTEGER
  iSDNLayer3TimersNet5T305 INTEGER
  iSDNLayer3TimersNet5T306 INTEGER
  iSDNLayer3TimersNet5T308 INTEGER
  iSDNLayer3TimersNet5T309 INTEGER
  iSDNLayer3TimersNet5T310 INTEGER
  iSDNLayer3TimersNet5T312 INTEGER
  iSDNLayer3TimersNet5T313 INTEGER
  iSDNLayer3TimersNet5T316 INTEGER
  iSDNLayer3TimersNet5T318 INTEGER
  iSDNLayer3TimersNet5T319 INTEGER
  iSDNLayer3TimersNet5T321 INTEGER
  iSDNLayer3TimersNet5T322 INTEGER
  iSDNLayer3TimersNet5T3m1 INTEGER

ISDNLayer3TimersNttEntry  
SEQUENCE    
  iSDNLayer3TimersNttPathString DisplayString
  iSDNLayer3TimersNttRowStatus RowStatus
  iSDNLayer3TimersNttKeyValue INTEGER
  iSDNLayer3TimersNttT302 INTEGER
  iSDNLayer3TimersNttT303 INTEGER
  iSDNLayer3TimersNttT304 INTEGER
  iSDNLayer3TimersNttT305 INTEGER
  iSDNLayer3TimersNttT306 INTEGER
  iSDNLayer3TimersNttT308 INTEGER
  iSDNLayer3TimersNttT309 INTEGER
  iSDNLayer3TimersNttT310 INTEGER
  iSDNLayer3TimersNttT312 INTEGER
  iSDNLayer3TimersNttT313 INTEGER
  iSDNLayer3TimersNttT316 INTEGER
  iSDNLayer3TimersNttT318 INTEGER
  iSDNLayer3TimersNttT319 INTEGER
  iSDNLayer3TimersNttT321 INTEGER
  iSDNLayer3TimersNttT322 INTEGER
  iSDNLayer3TimersNttT3m1 INTEGER

L2FHomeGatewayEntry  
SEQUENCE    
  l2FHomeGatewayPathString DisplayString
  l2FHomeGatewayRowStatus RowStatus
  l2FHomeGatewayKeyValue INTEGER
  l2FHomeGatewayIPAddress IpAddress
  l2FHomeGatewayHostName DisplayString
  l2FHomeGatewaySendName DisplayString
  l2FHomeGatewaySendPassword DisplayString
  l2FHomeGatewayReceiveName DisplayString
  l2FHomeGatewayReceivePassword DisplayString
  l2FHomeGatewaySendChecksum Boolean
  l2FHomeGatewayCheckChecksum Boolean
  l2FHomeGatewaySendUDPChecksum Boolean
  l2FHomeGatewayEchoInterval INTEGER
  l2FHomeGatewayEchoRetries INTEGER

L2TPLNSEntry  
SEQUENCE    
  l2TPLNSPathString DisplayString
  l2TPLNSRowStatus RowStatus
  l2TPLNSKeyValue INTEGER
  l2TPLNSIPAddress IpAddress
  l2TPLNSSourceIPAddress IpAddress
  l2TPLNSSendName DisplayString
  l2TPLNSSharedSecret DisplayString
  l2TPLNSEnableUDPChecksum Boolean
  l2TPLNSHelloInterval INTEGER
  l2TPLNSInitialAckTimeout INTEGER
  l2TPLNSMaxAckTimeout INTEGER
  l2TPLNSCtrlMsgRetries INTEGER
  l2TPLNSCtrlMsgRxWindow INTEGER

LeasedLineConfigEntry  
SEQUENCE    
  leasedLineConfigPathString DisplayString
  leasedLineConfigRowStatus RowStatus
  leasedLineConfigKeyValue INTEGER
  leasedLineConfigAdminState INTEGER

VirtualLinkConfigEntry  
SEQUENCE    
  virtualLinkConfigPathString DisplayString
  virtualLinkConfigRowStatus RowStatus
  virtualLinkConfigKeyValue INTEGER
  virtualLinkConfigChannelPhyLink INTEGER
  virtualLinkConfigChannelEnable INTEGER
  virtualLinkConfigChannelName DisplayString
  virtualLinkConfigChannelMap INTEGER
  virtualLinkConfigChannelDelineation Boolean
  virtualLinkConfigChannelCRCType INTEGER
  virtualLinkConfigChannelIdle INTEGER
  virtualLinkConfigChannelFCSInvert Boolean
  virtualLinkConfigChannelDataInvert Boolean
  virtualLinkConfigChannelChannelisedLink Boolean
  virtualLinkConfigChannelByteSyncLink Boolean
  virtualLinkConfigChannelRate INTEGER
  virtualLinkConfigChannelQueueDepth INTEGER

MacConfigEntry  
SEQUENCE    
  macConfigPathString DisplayString
  macConfigRowStatus RowStatus
  macConfigKeyValue INTEGER
  macConfigAdminState INTEGER

IopConfigEntry  
SEQUENCE    
  iopConfigPathString DisplayString
  iopConfigRowStatus RowStatus
  iopConfigKeyValue INTEGER
  iopConfigAdminState INTEGER
  iopConfigIOPImageName DisplayString
  iopConfigModemImageName DisplayString

DmmAdminConfigEntry  
SEQUENCE    
  dmmAdminConfigPathString DisplayString
  dmmAdminConfigRowStatus RowStatus
  dmmAdminConfigKeyValue INTEGER
  dmmAdminConfigAdminState INTEGER

PackAdminConfigEntry  
SEQUENCE    
  packAdminConfigPathString DisplayString
  packAdminConfigRowStatus RowStatus
  packAdminConfigKeyValue INTEGER
  packAdminConfigAdminState INTEGER

ModemAdminConfigEntry  
SEQUENCE    
  modemAdminConfigPathString DisplayString
  modemAdminConfigRowStatus RowStatus
  modemAdminConfigKeyValue INTEGER
  modemAdminConfigAdminState INTEGER

ModemConfigEntry  
SEQUENCE    
  modemConfigPathString DisplayString
  modemConfigRowStatus RowStatus
  modemConfigKeyValue INTEGER
  modemConfigAnswerString DisplayString
  modemConfigCallString DisplayString
  modemConfigPhoneNumber DisplayString
  modemConfigMinConnectSpeed INTEGER
  modemConfigMaxConnectSpeed INTEGER
  modemConfigFlowControl INTEGER
  modemConfigConnectTimeout INTEGER
  modemConfigDetectProtocol Boolean
  modemConfigDetectDefault INTEGER
  modemConfigDetectTimeout INTEGER
  modemConfigVoicePcmCoding INTEGER
  modemConfigVoiceSilenceHandling INTEGER
  modemConfigVoiceFrameGeneration INTEGER
  modemConfigVoiceG723Rate INTEGER
  modemConfigVoiceAdaptivePostfilter INTEGER
  modemConfigVoiceActivityDetect INTEGER
  modemConfigVoicePacketInterval INTEGER
  modemConfigVoiceDtmfVoice INTEGER
  modemConfigVoiceDtmfPayloads INTEGER
  modemConfigVoiceDtmfPayloadType INTEGER
  modemConfigVoiceDtmfRedundantType INTEGER
  modemConfigVoiceDgainPackettoPCM INTEGER
  modemConfigVoiceDgainPCMtoPacket INTEGER
  modemConfigVoiceEchoTail INTEGER
  modemConfigVoiceEchoRxMute INTEGER
  modemConfigVoiceEchoTxMute INTEGER
  modemConfigVoiceEchoTxFixedGain INTEGER
  modemConfigVoiceEchoCoeffFreeze INTEGER
  modemConfigVoiceEchoReset INTEGER
  modemConfigVoiceEchoDisable INTEGER
  modemConfigVoiceEchoMasterEnable INTEGER
  modemConfigVoiceLatePacketMax INTEGER
  modemConfigVoiceLatePacketMin INTEGER
  modemConfigVoiceLatePacketWin INTEGER
  modemConfigVoiceLatePacketRatio INTEGER
  modemConfigVoiceFaxModemAutoswitch INTEGER
  modemConfigVoicePayloadTypeAutoswitch INTEGER
  modemConfigVoiceAutoswitchPacketSize INTEGER
  modemConfigVoiceNoPathTeardown INTEGER
  modemConfigVoiceRtcpPeriod INTEGER
  modemConfigVoiceStatsPeriod INTEGER
  modemConfigVoiceDspPatch INTEGER
  modemConfigVoiceDspPatchString OCTET STRING

UdlConfigEntry  
SEQUENCE    
  udlConfigPathString DisplayString
  udlConfigRowStatus RowStatus
  udlConfigKeyValue INTEGER
  udlConfigEnabled Boolean
  udlConfigIpaddress IpAddress
  udlConfigIpmask IpAddress
  udlConfigDumpserver IpAddress
  udlConfigDumpfile DisplayString

PppConfigEntry  
SEQUENCE    
  pppConfigPathString DisplayString
  pppConfigRowStatus RowStatus
  pppConfigKeyValue INTEGER
  pppConfigEstablishTimeLimit INTEGER
  pppConfigConnectLimit INTEGER
  pppConfigInactivityLimit INTEGER
  pppConfigMonitorTxActivity Boolean
  pppConfigMonitorRxActivity Boolean
  pppConfigCountRIP Boolean
  pppConfigCountPings Boolean
  pppConfigCountIGMP Boolean
  pppConfigUseEchoes Boolean
  pppConfigSendID Boolean
  pppConfigSendTimeRemaining Boolean
  pppConfigSendMRU Boolean
  pppConfigSendACCM Boolean
  pppConfigSendMagic Boolean
  pppConfigSendPFC Boolean
  pppConfigSendACFC Boolean
  pppConfigSendShortSeq Boolean
  pppConfigSendEndpointDisc Boolean
  pppConfigAllowMRU Boolean
  pppConfigAllowACCM Boolean
  pppConfigAllowMagic Boolean
  pppConfigAllowPFC Boolean
  pppConfigAllowACFC Boolean
  pppConfigAllowShortSeq Boolean
  pppConfigAllowEndpointDisc Boolean
  pppConfigLCPMaxConfigure INTEGER
  pppConfigLCPRestartTimer INTEGER
  pppConfigPassiveLCP Boolean
  pppConfigPassiveLCPTimeout INTEGER
  pppConfigMinRemoteMRU INTEGER
  pppConfigMinLocalMRU INTEGER
  pppConfigDesiredLocalMRU INTEGER
  pppConfigTransmitACCM INTEGER
  pppConfigReceiveACCM INTEGER
  pppConfigMinRemoteMRRU INTEGER
  pppConfigDesiredRemoteMRRU INTEGER
  pppConfigMinLocalMRRU INTEGER
  pppConfigDesiredLocalMRRU INTEGER
  pppConfigLCPEchoRetries INTEGER
  pppConfigLCPEchoTimeout INTEGER
  pppConfigLCPEchoErrorTimeout INTEGER
  pppConfigTimeRemainingInterval INTEGER
  pppConfigIDText DisplayString
  pppConfigAuthRequire Boolean
  pppConfigAuthAllow Boolean
  pppConfigAuthServerProtocol1 INTEGER
  pppConfigAuthServerProtocol2 INTEGER
  pppConfigAuthServerProtocol3 INTEGER
  pppConfigAuthServerProtocol4 INTEGER
  pppConfigAuthClientProtocol1 INTEGER
  pppConfigAuthClientProtocol2 INTEGER
  pppConfigAuthClientProtocol3 INTEGER
  pppConfigAuthClientProtocol4 INTEGER
  pppConfigPAPClientRetries INTEGER
  pppConfigPAPClientTimeout INTEGER
  pppConfigPAPServerRetries INTEGER
  pppConfigPAPServerTimeout INTEGER
  pppConfigCHAPClientRetries INTEGER
  pppConfigCHAPClientTimeout INTEGER
  pppConfigCHAPServerRetries INTEGER
  pppConfigCHAPServerChallenges INTEGER
  pppConfigCHAPServerTimeout INTEGER
  pppConfigCHAPValueLength INTEGER
  pppConfigAuthFailureRenegotiatesLCP Boolean
  pppConfigUserName DisplayString
  pppConfigPassword DisplayString
  pppConfigIPCPEnabled Boolean
  pppConfigLocalIPAddress IpAddress
  pppConfigRemoteIPAddress IpAddress
  pppConfigAllowPeerIPAddress Boolean
  pppConfigVJEnabled Boolean
  pppConfigVJSlots INTEGER
  pppConfigSendDNS Boolean
  pppConfigSendNBNS Boolean
  pppConfigIPCPMaxConfigure INTEGER
  pppConfigIPCPRestartTimer INTEGER
  pppConfigPassiveIPCP Boolean
  pppConfigPassiveIPCPTimeout INTEGER
  pppConfigDNS1 IpAddress
  pppConfigDNS2 IpAddress
  pppConfigNBNS1 IpAddress
  pppConfigNBNS2 IpAddress
  pppConfigSendLocalIPAddress INTEGER
  pppConfigPeerNSStrategy INTEGER
  pppConfigMLPEnabled Boolean
  pppConfigMLPMaxLinks INTEGER
  pppConfigMLPFragmentSize INTEGER
  pppConfigMLPMaxFragments INTEGER
  pppConfigMLPScaleFragments Boolean
  pppConfigMLPSendNullFragments Boolean
  pppConfigMLPNullFragmentTimeout INTEGER
  pppConfigMLPEndpointDisc INTEGER
  pppConfigMLPGroupNumber INTEGER
  pppConfigLogEnabled Boolean
  pppConfigLogDump Boolean
  pppConfigLogSize INTEGER
  pppConfigLogControlFrames Boolean
  pppConfigLogProtocolFrames Boolean
  pppConfigLogOptions Boolean
  pppConfigLogStates Boolean
  pppConfigLogCompression Boolean
  pppConfigLogMLP Boolean
  pppConfigLogVJ Boolean
  pppConfigCCPEnabled Boolean
  pppConfigCompressFrames Boolean
  pppConfigStac3Enabled Boolean
  pppConfigStac4Enabled Boolean
  pppConfigMPPCEnabled Boolean
  pppConfigStacPerformance INTEGER
  pppConfigStacMode INTEGER
  pppConfigIPXCPEnabled Boolean
  pppConfigIPXNetworkNumber INTEGER
  pppConfigIPXNodeNumber DisplayString

PppModemConfigEntry  
SEQUENCE    
  pppModemConfigPathString DisplayString
  pppModemConfigRowStatus RowStatus
  pppModemConfigKeyValue INTEGER
  pppModemConfigEstablishTimeLimit INTEGER
  pppModemConfigConnectLimit INTEGER
  pppModemConfigInactivityLimit INTEGER
  pppModemConfigMonitorTxActivity Boolean
  pppModemConfigMonitorRxActivity Boolean
  pppModemConfigCountRIP Boolean
  pppModemConfigCountPings Boolean
  pppModemConfigCountIGMP Boolean
  pppModemConfigUseEchoes Boolean
  pppModemConfigSendID Boolean
  pppModemConfigSendTimeRemaining Boolean
  pppModemConfigSendMRU Boolean
  pppModemConfigSendACCM Boolean
  pppModemConfigSendMagic Boolean
  pppModemConfigSendPFC Boolean
  pppModemConfigSendACFC Boolean
  pppModemConfigSendShortSeq Boolean
  pppModemConfigSendEndpointDisc Boolean
  pppModemConfigAllowMRU Boolean
  pppModemConfigAllowACCM Boolean
  pppModemConfigAllowMagic Boolean
  pppModemConfigAllowPFC Boolean
  pppModemConfigAllowACFC Boolean
  pppModemConfigAllowShortSeq Boolean
  pppModemConfigAllowEndpointDisc Boolean
  pppModemConfigLCPMaxConfigure INTEGER
  pppModemConfigLCPRestartTimer INTEGER
  pppModemConfigPassiveLCP Boolean
  pppModemConfigPassiveLCPTimeout INTEGER
  pppModemConfigMinRemoteMRU INTEGER
  pppModemConfigMinLocalMRU INTEGER
  pppModemConfigDesiredLocalMRU INTEGER
  pppModemConfigTransmitACCM INTEGER
  pppModemConfigReceiveACCM INTEGER
  pppModemConfigMinRemoteMRRU INTEGER
  pppModemConfigDesiredRemoteMRRU INTEGER
  pppModemConfigMinLocalMRRU INTEGER
  pppModemConfigDesiredLocalMRRU INTEGER
  pppModemConfigLCPEchoRetries INTEGER
  pppModemConfigLCPEchoTimeout INTEGER
  pppModemConfigLCPEchoErrorTimeout INTEGER
  pppModemConfigTimeRemainingInterval INTEGER
  pppModemConfigIDText DisplayString
  pppModemConfigAuthRequire Boolean
  pppModemConfigAuthAllow Boolean
  pppModemConfigAuthServerProtocol1 INTEGER
  pppModemConfigAuthServerProtocol2 INTEGER
  pppModemConfigAuthServerProtocol3 INTEGER
  pppModemConfigAuthServerProtocol4 INTEGER
  pppModemConfigAuthClientProtocol1 INTEGER
  pppModemConfigAuthClientProtocol2 INTEGER
  pppModemConfigAuthClientProtocol3 INTEGER
  pppModemConfigAuthClientProtocol4 INTEGER
  pppModemConfigPAPClientRetries INTEGER
  pppModemConfigPAPClientTimeout INTEGER
  pppModemConfigPAPServerRetries INTEGER
  pppModemConfigPAPServerTimeout INTEGER
  pppModemConfigCHAPClientRetries INTEGER
  pppModemConfigCHAPClientTimeout INTEGER
  pppModemConfigCHAPServerRetries INTEGER
  pppModemConfigCHAPServerChallenges INTEGER
  pppModemConfigCHAPServerTimeout INTEGER
  pppModemConfigCHAPValueLength INTEGER
  pppModemConfigAuthFailureRenegotiatesLCP Boolean
  pppModemConfigUserName DisplayString
  pppModemConfigPassword DisplayString
  pppModemConfigIPCPEnabled Boolean
  pppModemConfigLocalIPAddress IpAddress
  pppModemConfigRemoteIPAddress IpAddress
  pppModemConfigAllowPeerIPAddress Boolean
  pppModemConfigVJEnabled Boolean
  pppModemConfigVJSlots INTEGER
  pppModemConfigSendDNS Boolean
  pppModemConfigSendNBNS Boolean
  pppModemConfigIPCPMaxConfigure INTEGER
  pppModemConfigIPCPRestartTimer INTEGER
  pppModemConfigPassiveIPCP Boolean
  pppModemConfigPassiveIPCPTimeout INTEGER
  pppModemConfigDNS1 IpAddress
  pppModemConfigDNS2 IpAddress
  pppModemConfigNBNS1 IpAddress
  pppModemConfigNBNS2 IpAddress
  pppModemConfigSendLocalIPAddress INTEGER
  pppModemConfigPeerNSStrategy INTEGER
  pppModemConfigMLPEnabled Boolean
  pppModemConfigMLPMaxLinks INTEGER
  pppModemConfigMLPFragmentSize INTEGER
  pppModemConfigMLPMaxFragments INTEGER
  pppModemConfigMLPScaleFragments Boolean
  pppModemConfigMLPSendNullFragments Boolean
  pppModemConfigMLPNullFragmentTimeout INTEGER
  pppModemConfigMLPEndpointDisc INTEGER
  pppModemConfigMLPGroupNumber INTEGER
  pppModemConfigLogEnabled Boolean
  pppModemConfigLogDump Boolean
  pppModemConfigLogSize INTEGER
  pppModemConfigLogControlFrames Boolean
  pppModemConfigLogProtocolFrames Boolean
  pppModemConfigLogOptions Boolean
  pppModemConfigLogStates Boolean
  pppModemConfigLogCompression Boolean
  pppModemConfigLogMLP Boolean
  pppModemConfigLogVJ Boolean
  pppModemConfigCCPEnabled Boolean
  pppModemConfigCompressFrames Boolean
  pppModemConfigStac3Enabled Boolean
  pppModemConfigStac4Enabled Boolean
  pppModemConfigMPPCEnabled Boolean
  pppModemConfigStacPerformance INTEGER
  pppModemConfigStacMode INTEGER
  pppModemConfigIPXCPEnabled Boolean
  pppModemConfigIPXNetworkNumber INTEGER
  pppModemConfigIPXNodeNumber DisplayString

PppIsdnConfigEntry  
SEQUENCE    
  pppIsdnConfigPathString DisplayString
  pppIsdnConfigRowStatus RowStatus
  pppIsdnConfigKeyValue INTEGER
  pppIsdnConfigEstablishTimeLimit INTEGER
  pppIsdnConfigConnectLimit INTEGER
  pppIsdnConfigInactivityLimit INTEGER
  pppIsdnConfigMonitorTxActivity Boolean
  pppIsdnConfigMonitorRxActivity Boolean
  pppIsdnConfigCountRIP Boolean
  pppIsdnConfigCountPings Boolean
  pppIsdnConfigCountIGMP Boolean
  pppIsdnConfigUseEchoes Boolean
  pppIsdnConfigSendID Boolean
  pppIsdnConfigSendTimeRemaining Boolean
  pppIsdnConfigSendMRU Boolean
  pppIsdnConfigSendACCM Boolean
  pppIsdnConfigSendMagic Boolean
  pppIsdnConfigSendPFC Boolean
  pppIsdnConfigSendACFC Boolean
  pppIsdnConfigSendShortSeq Boolean
  pppIsdnConfigSendEndpointDisc Boolean
  pppIsdnConfigAllowMRU Boolean
  pppIsdnConfigAllowACCM Boolean
  pppIsdnConfigAllowMagic Boolean
  pppIsdnConfigAllowPFC Boolean
  pppIsdnConfigAllowACFC Boolean
  pppIsdnConfigAllowShortSeq Boolean
  pppIsdnConfigAllowEndpointDisc Boolean
  pppIsdnConfigLCPMaxConfigure INTEGER
  pppIsdnConfigLCPRestartTimer INTEGER
  pppIsdnConfigPassiveLCP Boolean
  pppIsdnConfigPassiveLCPTimeout INTEGER
  pppIsdnConfigMinRemoteMRU INTEGER
  pppIsdnConfigMinLocalMRU INTEGER
  pppIsdnConfigDesiredLocalMRU INTEGER
  pppIsdnConfigTransmitACCM INTEGER
  pppIsdnConfigReceiveACCM INTEGER
  pppIsdnConfigMinRemoteMRRU INTEGER
  pppIsdnConfigDesiredRemoteMRRU INTEGER
  pppIsdnConfigMinLocalMRRU INTEGER
  pppIsdnConfigDesiredLocalMRRU INTEGER
  pppIsdnConfigLCPEchoRetries INTEGER
  pppIsdnConfigLCPEchoTimeout INTEGER
  pppIsdnConfigLCPEchoErrorTimeout INTEGER
  pppIsdnConfigTimeRemainingInterval INTEGER
  pppIsdnConfigIDText DisplayString
  pppIsdnConfigAuthRequire Boolean
  pppIsdnConfigAuthAllow Boolean
  pppIsdnConfigAuthServerProtocol1 INTEGER
  pppIsdnConfigAuthServerProtocol2 INTEGER
  pppIsdnConfigAuthServerProtocol3 INTEGER
  pppIsdnConfigAuthServerProtocol4 INTEGER
  pppIsdnConfigAuthClientProtocol1 INTEGER
  pppIsdnConfigAuthClientProtocol2 INTEGER
  pppIsdnConfigAuthClientProtocol3 INTEGER
  pppIsdnConfigAuthClientProtocol4 INTEGER
  pppIsdnConfigPAPClientRetries INTEGER
  pppIsdnConfigPAPClientTimeout INTEGER
  pppIsdnConfigPAPServerRetries INTEGER
  pppIsdnConfigPAPServerTimeout INTEGER
  pppIsdnConfigCHAPClientRetries INTEGER
  pppIsdnConfigCHAPClientTimeout INTEGER
  pppIsdnConfigCHAPServerRetries INTEGER
  pppIsdnConfigCHAPServerChallenges INTEGER
  pppIsdnConfigCHAPServerTimeout INTEGER
  pppIsdnConfigCHAPValueLength INTEGER
  pppIsdnConfigAuthFailureRenegotiatesLCP Boolean
  pppIsdnConfigUserName DisplayString
  pppIsdnConfigPassword DisplayString
  pppIsdnConfigIPCPEnabled Boolean
  pppIsdnConfigLocalIPAddress IpAddress
  pppIsdnConfigRemoteIPAddress IpAddress
  pppIsdnConfigAllowPeerIPAddress Boolean
  pppIsdnConfigVJEnabled Boolean
  pppIsdnConfigVJSlots INTEGER
  pppIsdnConfigSendDNS Boolean
  pppIsdnConfigSendNBNS Boolean
  pppIsdnConfigIPCPMaxConfigure INTEGER
  pppIsdnConfigIPCPRestartTimer INTEGER
  pppIsdnConfigPassiveIPCP Boolean
  pppIsdnConfigPassiveIPCPTimeout INTEGER
  pppIsdnConfigDNS1 IpAddress
  pppIsdnConfigDNS2 IpAddress
  pppIsdnConfigNBNS1 IpAddress
  pppIsdnConfigNBNS2 IpAddress
  pppIsdnConfigSendLocalIPAddress INTEGER
  pppIsdnConfigPeerNSStrategy INTEGER
  pppIsdnConfigMLPEnabled Boolean
  pppIsdnConfigMLPMaxLinks INTEGER
  pppIsdnConfigMLPFragmentSize INTEGER
  pppIsdnConfigMLPMaxFragments INTEGER
  pppIsdnConfigMLPScaleFragments Boolean
  pppIsdnConfigMLPSendNullFragments Boolean
  pppIsdnConfigMLPNullFragmentTimeout INTEGER
  pppIsdnConfigMLPEndpointDisc INTEGER
  pppIsdnConfigMLPGroupNumber INTEGER
  pppIsdnConfigLogEnabled Boolean
  pppIsdnConfigLogDump Boolean
  pppIsdnConfigLogSize INTEGER
  pppIsdnConfigLogControlFrames Boolean
  pppIsdnConfigLogProtocolFrames Boolean
  pppIsdnConfigLogOptions Boolean
  pppIsdnConfigLogStates Boolean
  pppIsdnConfigLogCompression Boolean
  pppIsdnConfigLogMLP Boolean
  pppIsdnConfigLogVJ Boolean
  pppIsdnConfigCCPEnabled Boolean
  pppIsdnConfigCompressFrames Boolean
  pppIsdnConfigStac3Enabled Boolean
  pppIsdnConfigStac4Enabled Boolean
  pppIsdnConfigMPPCEnabled Boolean
  pppIsdnConfigStacPerformance INTEGER
  pppIsdnConfigStacMode INTEGER
  pppIsdnConfigIPXCPEnabled Boolean
  pppIsdnConfigIPXNetworkNumber INTEGER
  pppIsdnConfigIPXNodeNumber DisplayString

CLIEntry  
SEQUENCE    
  cLIPathString DisplayString
  cLIRowStatus RowStatus
  cLIKeyValue INTEGER
  cLIPrompt DisplayString
  cLIFEPLog Boolean
  cLISyncLog Boolean
  cLIWarningTemp INTEGER
  cLIHoldTempShutdownCardsInReset Boolean
  cLIShutdownTemperature INTEGER

OosEntry  
SEQUENCE    
  oosPathString DisplayString
  oosRowStatus RowStatus
  oosKeyValue INTEGER
  oosOosValue INTEGER

MetaContainerEntry  
SEQUENCE    
  metaContainerPathString DisplayString
  metaContainerRowStatus RowStatus
  metaContainerKeyValue INTEGER
  metaContainerCmlid INTEGER
  metaContainerCmlname DisplayString

CoredumpConfigEntry  
SEQUENCE    
  coredumpConfigPathString DisplayString
  coredumpConfigRowStatus RowStatus
  coredumpConfigKeyValue INTEGER
  coredumpConfigDumpSCC Boolean
  coredumpConfigDumpMAC Boolean
  coredumpConfigDumpDAC Boolean
  coredumpConfigOutputMode INTEGER
  coredumpConfigOutputDrive INTEGER

EventConfigEntry  
SEQUENCE    
  eventConfigPathString DisplayString
  eventConfigRowStatus RowStatus
  eventConfigKeyValue INTEGER
  eventConfigDefaultLogLevel INTEGER

ShellConfigEntry  
SEQUENCE    
  shellConfigPathString DisplayString
  shellConfigRowStatus RowStatus
  shellConfigKeyValue INTEGER
  shellConfigConnectTimeout INTEGER
  shellConfigRetryCount INTEGER
  shellConfigEchoName Boolean
  shellConfigEchoPassword Boolean
  shellConfigEchoCommands Boolean
  shellConfigCtrlDAborts Boolean
  shellConfigShellCommand Boolean
  shellConfigPPPCommand Boolean
  shellConfigTelnetCommand Boolean
  shellConfigRloginCommand Boolean
  shellConfigBannerText OCTET STRING
  shellConfigExtraLoginText DisplayString
  shellConfigNamePrompt DisplayString
  shellConfigPasswordPrompt DisplayString
  shellConfigWaitText DisplayString
  shellConfigAuthenticatedText DisplayString
  shellConfigFailureText DisplayString
  shellConfigCommandPrompt DisplayString
  shellConfigHangupText DisplayString
  shellConfigTimeoutText DisplayString

SessionConfigEntry  
SEQUENCE    
  sessionConfigPathString DisplayString
  sessionConfigRowStatus RowStatus
  sessionConfigKeyValue INTEGER
  sessionConfigDefaultVpopEnable INTEGER
  sessionConfigPreAuth INTEGER
  sessionConfigPreAuthPassword DisplayString
  sessionConfigPreAuthTimeout INTEGER
  sessionConfigPreAuthTimeoutAction INTEGER
  sessionConfigCheckpointTime INTEGER
  sessionConfigTerminateEnable INTEGER
  sessionConfigTerminateSecret DisplayString
  sessionConfigLogEnable INTEGER
  sessionConfigPreAuthAAAGroup INTEGER
  sessionConfigDS0DiscTimeOut INTEGER
  sessionConfigAcctReportFailedSessions INTEGER

SignalingConfigEntry  
SEQUENCE    
  signalingConfigPathString DisplayString
  signalingConfigRowStatus RowStatus
  signalingConfigKeyValue INTEGER
  signalingConfigSs7Mode INTEGER
  signalingConfigDsmccTimeout INTEGER
  signalingConfigDsmccHoldTime INTEGER
  signalingConfigDsmccRetries INTEGER
  signalingConfigConfigPPP INTEGER
  signalingConfigDebugMode INTEGER
  signalingConfigSs7Gateway INTEGER

IpdcConfigEntry  
SEQUENCE    
  ipdcConfigPathString DisplayString
  ipdcConfigRowStatus RowStatus
  ipdcConfigKeyValue INTEGER
  ipdcConfigPrimarySwitchIpAddr IpAddress
  ipdcConfigPrimarySwitchPort INTEGER
  ipdcConfigSecondarySwitchIpAddr IpAddress
  ipdcConfigSecondarySwitchPort INTEGER
  ipdcConfigBayNumber DisplayString
  ipdcConfigSystemType DisplayString
  ipdcConfigSystemID DisplayString
  ipdcConfigTxTone INTEGER
  ipdcConfigRxTone INTEGER

SoftswitchConfigEntry  
SEQUENCE    
  softswitchConfigPathString DisplayString
  softswitchConfigRowStatus RowStatus
  softswitchConfigKeyValue INTEGER
  softswitchConfigSoftswitchEnable INTEGER
  softswitchConfigIpAddr IpAddress
  softswitchConfigPort INTEGER

SessionTableFormatEntry  
SEQUENCE    
  sessionTableFormatPathString DisplayString
  sessionTableFormatRowStatus RowStatus
  sessionTableFormatKeyValue INTEGER
  sessionTableFormatUseDefault INTEGER
  sessionTableFormatHeading1 DisplayString
  sessionTableFormatWidth1 INTEGER
  sessionTableFormatParam1 INTEGER
  sessionTableFormatHeading2 DisplayString
  sessionTableFormatWidth2 INTEGER
  sessionTableFormatParam2 INTEGER
  sessionTableFormatHeading3 DisplayString
  sessionTableFormatWidth3 INTEGER
  sessionTableFormatParam3 INTEGER
  sessionTableFormatHeading4 DisplayString
  sessionTableFormatWidth4 INTEGER
  sessionTableFormatParam4 INTEGER
  sessionTableFormatHeading5 DisplayString
  sessionTableFormatWidth5 INTEGER
  sessionTableFormatParam5 INTEGER
  sessionTableFormatHeading6 DisplayString
  sessionTableFormatWidth6 INTEGER
  sessionTableFormatParam6 INTEGER
  sessionTableFormatHeading7 DisplayString
  sessionTableFormatWidth7 INTEGER
  sessionTableFormatParam7 INTEGER
  sessionTableFormatHeading8 DisplayString
  sessionTableFormatWidth8 INTEGER
  sessionTableFormatParam8 INTEGER
  sessionTableFormatHeading9 DisplayString
  sessionTableFormatWidth9 INTEGER
  sessionTableFormatParam9 INTEGER
  sessionTableFormatHeading10 DisplayString
  sessionTableFormatWidth10 INTEGER
  sessionTableFormatParam10 INTEGER

PolicyConfigEntry  
SEQUENCE    
  policyConfigPathString DisplayString
  policyConfigRowStatus RowStatus
  policyConfigKeyValue INTEGER
  policyConfigModemAllocationPolicy INTEGER
  policyConfigModemReviveTimeout INTEGER
  policyConfigModemFailCount INTEGER
  policyConfigModemFailSample INTEGER
  policyConfigReuseBadModems Boolean
  policyConfigDoSS7Resourcing Boolean
  policyConfigDefaultModemRPI INTEGER
  policyConfigModemSleepTimeout INTEGER
  policyConfigDNISMatchPolicy INTEGER
  policyConfigDS1AllocationPolicy INTEGER
  policyConfigDS0AllocationPolicy INTEGER
  policyConfigChassisModemThresholdWarning INTEGER
  policyConfigSlotModemThresholdWarning INTEGER
  policyConfigActionBacklog INTEGER

SlotConfigEntry  
SEQUENCE    
  slotConfigPathString DisplayString
  slotConfigRowStatus RowStatus
  slotConfigKeyValue INTEGER
  slotConfigAdminServiceModule INTEGER
  slotConfigAdminLineTerminationModule INTEGER

T1ConfigEntry  
SEQUENCE    
  t1ConfigPathString DisplayString
  t1ConfigRowStatus RowStatus
  t1ConfigKeyValue INTEGER
  t1ConfigAdminState INTEGER
  t1ConfigLineFraming INTEGER
  t1ConfigLineCode INTEGER
  t1ConfigLineBuildout INTEGER
  t1ConfigSignaling INTEGER
  t1ConfigClockingPriority INTEGER
  t1ConfigYellowAlarm INTEGER
  t1ConfigLoopBack INTEGER
  t1ConfigDefaultNumber DisplayString
  t1ConfigOverrideNumber DisplayString
  t1ConfigCircuitID DisplayString
  t1ConfigAlarmCriteria INTEGER

T1NumberEntry  
SEQUENCE    
  t1NumberPathString DisplayString
  t1NumberRowStatus RowStatus
  t1NumberKeyValue INTEGER
  t1NumberNumber DisplayString

T1TrunkconfigEntry  
SEQUENCE    
  t1TrunkconfigPathString DisplayString
  t1TrunkconfigRowStatus RowStatus
  t1TrunkconfigKeyValue INTEGER
  t1TrunkconfigAdminState INTEGER
  t1TrunkconfigClockSource INTEGER
  t1TrunkconfigLineFraming INTEGER
  t1TrunkconfigLineCode INTEGER
  t1TrunkconfigLineBuildout INTEGER

DS3TrunkconfigEntry  
SEQUENCE    
  dS3TrunkconfigPathString DisplayString
  dS3TrunkconfigRowStatus RowStatus
  dS3TrunkconfigKeyValue INTEGER
  dS3TrunkconfigAdminState INTEGER
  dS3TrunkconfigLineFraming INTEGER
  dS3TrunkconfigLineBuildout INTEGER
  dS3TrunkconfigTiming INTEGER

T1liuConfigEntry  
SEQUENCE    
  t1liuConfigPathString DisplayString
  t1liuConfigRowStatus RowStatus
  t1liuConfigKeyValue INTEGER
  t1liuConfigAdminState INTEGER
  t1liuConfigCircuitID DisplayString

T3ConfigEntry  
SEQUENCE    
  t3ConfigPathString DisplayString
  t3ConfigRowStatus RowStatus
  t3ConfigKeyValue INTEGER
  t3ConfigAdminState INTEGER
  t3ConfigLineFraming INTEGER
  t3ConfigLineCode INTEGER
  t3ConfigLineBuildout INTEGER
  t3ConfigTiming INTEGER
  t3ConfigLoopBack INTEGER
  t3ConfigCircuitID DisplayString

SignalingGatewayEntry  
SEQUENCE    
  signalingGatewayPathString DisplayString
  signalingGatewayRowStatus RowStatus
  signalingGatewayKeyValue INTEGER
  signalingGatewayIpAddr IpAddress

DacConfigEntry  
SEQUENCE    
  dacConfigPathString DisplayString
  dacConfigRowStatus RowStatus
  dacConfigKeyValue INTEGER
  dacConfigAdminState INTEGER

TunnelGroupConfigEntry  
SEQUENCE    
  tunnelGroupConfigPathString DisplayString
  tunnelGroupConfigRowStatus RowStatus
  tunnelGroupConfigKeyValue INTEGER
  tunnelGroupConfigTunnelProtocol INTEGER
  tunnelGroupConfigTunnelStrategy INTEGER

FrInterfaceConfigEntry  
SEQUENCE    
  frInterfaceConfigPathString DisplayString
  frInterfaceConfigRowStatus RowStatus
  frInterfaceConfigKeyValue INTEGER
  frInterfaceConfigFrDlcmiIfIndex INTEGER
  frInterfaceConfigFrDlcmiLMIType INTEGER
  frInterfaceConfigFrDlcmiAddress INTEGER
  frInterfaceConfigFrDlcmiAddressLen INTEGER
  frInterfaceConfigFrDlcmiPollingInterval INTEGER
  frInterfaceConfigFrDlcmiFullEnquiryInterval INTEGER
  frInterfaceConfigFrDlcmiErrorThreshold INTEGER
  frInterfaceConfigFrDlcmiMonitoredEvents INTEGER
  frInterfaceConfigFrDlcmiMaxSupportedVCs INTEGER
  frInterfaceConfigFrDlcmiMulticast INTEGER
  frInterfaceConfigFrDlcmiLinkType INTEGER
  frInterfaceConfigFrDlcmiMaxLogIntf INTEGER
  frInterfaceConfigFrDlcmiLinkEnable INTEGER
  frInterfaceConfigFrDlcmiLMIFlowControl INTEGER
  frInterfaceConfigFrDlcmiBECNFlowControl INTEGER
  frInterfaceConfigFrDlcmiLMIBandwidthControl INTEGER
  frInterfaceConfigFrDlcmiInjectionManagement INTEGER
  frInterfaceConfigFrDlcmiMaxFrameSize INTEGER
  frInterfaceConfigFrDlcmiName DisplayString
  frInterfaceConfigFrDlcmiLmiDlci INTEGER
  frInterfaceConfigFrDlcmiDceErrorThreshold INTEGER
  frInterfaceConfigFrDlcmiDceMonitoredEvents INTEGER

FrLogicalIFConfigEntry  
SEQUENCE    
  frLogicalIFConfigPathString DisplayString
  frLogicalIFConfigRowStatus RowStatus
  frLogicalIFConfigKeyValue INTEGER
  frLogicalIFConfigFrLIFIfIndex INTEGER
  frLogicalIFConfigFrLIFIndex INTEGER
  frLogicalIFConfigFrLIFEnable INTEGER
  frLogicalIFConfigFrLIFName DisplayString

FrCircuitConfigEntry  
SEQUENCE    
  frCircuitConfigPathString DisplayString
  frCircuitConfigRowStatus RowStatus
  frCircuitConfigKeyValue INTEGER
  frCircuitConfigFrCircuitIfIndex INTEGER
  frCircuitConfigFrCircuitLIFIndex INTEGER
  frCircuitConfigFrCircuitDlci INTEGER
  frCircuitConfigFrCircuitCommittedBurst INTEGER
  frCircuitConfigFrCircuitExcessBurst INTEGER
  frCircuitConfigFrCircuitThroughput INTEGER
  frCircuitConfigFrCircuitMulticast INTEGER
  frCircuitConfigFrCircuitVCCEnable INTEGER
  frCircuitConfigFrCircuitCommittedBurstMin INTEGER
  frCircuitConfigFrCircuitCongestionMonitorPeriod INTEGER
  frCircuitConfigFrCircuitName DisplayString

EthernetConfigEntry  
SEQUENCE    
  ethernetConfigPathString DisplayString
  ethernetConfigRowStatus RowStatus
  ethernetConfigKeyValue INTEGER
  ethernetConfigEthernetPhyPort INTEGER
  ethernetConfigEthernetEnable INTEGER
  ethernetConfigEthernetTlen INTEGER
  ethernetConfigEthernetRlen INTEGER
  ethernetConfigEthernetAutoneg INTEGER
  ethernetConfigEthernetPortspeed INTEGER
  ethernetConfigEthernetFullduplex INTEGER
  ethernetConfigEthernetPromEnable INTEGER
  ethernetConfigEthernetBcastControl INTEGER
  ethernetConfigEthernetFCSControl INTEGER
  ethernetConfigEthernetLoopback INTEGER
  ethernetConfigEthernetLinkTest INTEGER

IpWin32Entry  
SEQUENCE    
  ipWin32PathString DisplayString
  ipWin32RowStatus RowStatus
  ipWin32KeyValue INTEGER
  ipWin32Instance INTEGER
  ipWin32Devname DisplayString

LoopbackConfigEntry  
SEQUENCE    
  loopbackConfigPathString DisplayString
  loopbackConfigRowStatus RowStatus
  loopbackConfigKeyValue INTEGER
  loopbackConfigMode INTEGER
  loopbackConfigAdminState INTEGER

RbsConfigEntry  
SEQUENCE    
  rbsConfigPathString DisplayString
  rbsConfigRowStatus RowStatus
  rbsConfigKeyValue INTEGER
  rbsConfigMethod INTEGER
  rbsConfigDid Boolean
  rbsConfigAllowNoDigits Boolean
  rbsConfigDod Boolean
  rbsConfigGlareResolve Boolean
  rbsConfigOOS Boolean
  rbsConfigBusyOutOOS Boolean
  rbsConfigDigitType INTEGER
  rbsConfigMaxCalledDigits INTEGER
  rbsConfigReqR1CallingNumber Boolean

RbsTimersEntry  
SEQUENCE    
  rbsTimersPathString DisplayString
  rbsTimersRowStatus RowStatus
  rbsTimersKeyValue INTEGER
  rbsTimersHitThresh INTEGER
  rbsTimersInSeizeHold INTEGER
  rbsTimersInPreWinkExtend INTEGER
  rbsTimersInMinWinkHold INTEGER
  rbsTimersInMaxWinkHold INTEGER
  rbsTimersInPostWink INTEGER
  rbsTimersInDigit INTEGER
  rbsTimersAlerting INTEGER
  rbsTimersOutSeizeHold INTEGER
  rbsTimersOutWinkWait INTEGER
  rbsTimersOutMaxWinkHold INTEGER
  rbsTimersOutMaxWinkGlare INTEGER
  rbsTimersOutWaitSeizeAck INTEGER
  rbsTimersOutPostWink INTEGER
  rbsTimersOutFirstDigit INTEGER
  rbsTimersOutDigit INTEGER
  rbsTimersOutPostDigit INTEGER
  rbsTimersOutWaitConnect INTEGER
  rbsTimersOutConnectHold INTEGER
  rbsTimersLocalRelease INTEGER
  rbsTimersLineRelease INTEGER
  rbsTimersLineReleaseHold INTEGER
  rbsTimersRecover INTEGER
  rbsTimersInWaitKP INTEGER
  rbsTimersInPostDigitDelay INTEGER
  rbsTimersInToneDigitWait INTEGER
  rbsTimersInKpAckDelay INTEGER
  rbsTimersInKpDetectWait INTEGER
  rbsTimersInAniWaitKp INTEGER
  rbsTimersInPreKpExtend INTEGER
  rbsTimersOutPreDialQuietHold INTEGER

IpLocalSessionEntry  
SEQUENCE    
  ipLocalSessionPathString DisplayString
  ipLocalSessionRowStatus RowStatus
  ipLocalSessionKeyValue INTEGER
  ipLocalSessionRemoteIp IpAddress
  ipLocalSessionRemoteMask IpAddress
  ipLocalSessionLocalIp IpAddress
  ipLocalSessionAcceptRip Boolean
  ipLocalSessionFilterId INTEGER
  ipLocalSessionMtu INTEGER
  ipLocalSessionPoolNumber INTEGER
  ipLocalSessionRouteMulticast Boolean
  ipLocalSessionRateLimitMulticast INTEGER
  ipLocalSessionFramedRouting Boolean

ClearTcpLocalSessionEntry  
SEQUENCE    
  clearTcpLocalSessionPathString DisplayString
  clearTcpLocalSessionRowStatus RowStatus
  clearTcpLocalSessionKeyValue INTEGER
  clearTcpLocalSessionHostIpCount INTEGER
  clearTcpLocalSessionHostIp1 IpAddress
  clearTcpLocalSessionHostIp2 IpAddress
  clearTcpLocalSessionHostIp3 IpAddress
  clearTcpLocalSessionHostIp4 IpAddress
  clearTcpLocalSessionHostIp5 IpAddress
  clearTcpLocalSessionConnectType INTEGER
  clearTcpLocalSessionRemotePort INTEGER
  clearTcpLocalSessionHostName DisplayString

PppLocalSessionEntry  
SEQUENCE    
  pppLocalSessionPathString DisplayString
  pppLocalSessionRowStatus RowStatus
  pppLocalSessionKeyValue INTEGER
  pppLocalSessionVJEnabled Boolean
  pppLocalSessionConnectLimit INTEGER
  pppLocalSessionInactivityLimit INTEGER
  pppLocalSessionMLPMaxLinks INTEGER

LocalUsersEntry  
SEQUENCE    
  localUsersPathString DisplayString
  localUsersRowStatus RowStatus
  localUsersKeyValue INTEGER
  localUsersUsername DisplayString
  localUsersPassword DisplayString
  localUsersUserInformation DisplayString

IpSessionAccessListEntry  
SEQUENCE    
  ipSessionAccessListPathString DisplayString
  ipSessionAccessListRowStatus RowStatus
  ipSessionAccessListKeyValue INTEGER
  ipSessionAccessListFilterStatus INTEGER
  ipSessionAccessListFilterType INTEGER
  ipSessionAccessListMode INTEGER
  ipSessionAccessListProtocol INTEGER
  ipSessionAccessListSourceIp IpAddress
  ipSessionAccessListSourceMask IpAddress
  ipSessionAccessListDestinationIp IpAddress
  ipSessionAccessListDestinationMask IpAddress
  ipSessionAccessListCompare INTEGER
  ipSessionAccessListDestinationPort INTEGER
  ipSessionAccessListIcmpType INTEGER
  ipSessionAccessListIcmpCode INTEGER
  ipSessionAccessListIgmpType INTEGER
  ipSessionAccessListTcpFlag INTEGER

VpopConfigEntry  
SEQUENCE    
  vpopConfigPathString DisplayString
  vpopConfigRowStatus RowStatus
  vpopConfigKeyValue INTEGER
  vpopConfigName DisplayString
  vpopConfigAuthenticationServerGroup INTEGER
  vpopConfigAuthorizationServerGroup INTEGER
  vpopConfigAccountingServerGroup INTEGER
  vpopConfigPrivateFlag Boolean
  vpopConfigRouteAdvertise INTEGER
  vpopConfigMaxSessions INTEGER
  vpopConfigAddressMode INTEGER
  vpopConfigLocalAddress IpAddress
  vpopConfigAOLAuthLocal Boolean
  vpopConfigTunnelGroup INTEGER
  vpopConfigAuthMethod INTEGER
  vpopConfigVrouterId INTEGER
  vpopConfigMulticastClient INTEGER
  vpopConfigAdvertiseRadiusRoutes Boolean
  vpopConfigVoiceMode Boolean
  vpopConfigGatewayType INTEGER
  vpopConfigSourceIpAddress IpAddress
  vpopConfigMultilinkTunnelGroup INTEGER
  vpopConfigUseIPPoolFromOtherVPOP Boolean
  vpopConfigIPPoolVPOP INTEGER
  vpopConfigPreserveTunnelInfo Boolean
  vpopConfigGratuitousArpEnabled Boolean
  vpopConfigMLPSubsequentLinkAuth Boolean
  vpopConfigSendIPHint Boolean
  vpopConfigFilterErrorEnable Boolean
  vpopConfigL2TPDefaultSendName DisplayString
  vpopConfigL2TPDefaultSharedSecret DisplayString

DialedNumberEntry  
SEQUENCE    
  dialedNumberPathString DisplayString
  dialedNumberRowStatus RowStatus
  dialedNumberKeyValue INTEGER
  dialedNumberNumber DisplayString
  dialedNumberVpop INTEGER

OrganizationNameEntry  
SEQUENCE    
  organizationNamePathString DisplayString
  organizationNameRowStatus RowStatus
  organizationNameKeyValue INTEGER
  organizationNameOrganizationName DisplayString
  organizationNameVPOP INTEGER
  organizationNameTunnelGroup INTEGER
  organizationNameInputStyle INTEGER
  organizationNameInputTemplateString DisplayString
  organizationNameOutputStyle INTEGER
  organizationNameOutputTemplateString DisplayString

CallTypeOverrideEntry  
SEQUENCE    
  callTypeOverridePathString DisplayString
  callTypeOverrideRowStatus RowStatus
  callTypeOverrideKeyValue INTEGER
  callTypeOverridePresentedCallType INTEGER
  callTypeOverrideOverrideCallType INTEGER

DVSGatewayEntry  
SEQUENCE    
  dVSGatewayPathString DisplayString
  dVSGatewayRowStatus RowStatus
  dVSGatewayKeyValue INTEGER
  dVSGatewayGatewayAddress IpAddress
  dVSGatewayAuthenticationProtocol INTEGER
  dVSGatewayAccountingProtocol INTEGER
  dVSGatewayAuthenticationType INTEGER
  dVSGatewayAuthenticationMode INTEGER
  dVSGatewayAuthenticationLocation INTEGER
  dVSGatewayAuthenticationString DisplayString
  dVSGatewayRetransmitTimeout INTEGER
  dVSGatewayMaxRetransmits INTEGER
  dVSGatewayRenewalTime INTEGER
  dVSGatewayTgHardwareType INTEGER
  dVSGatewayTgHardwareAddressLength INTEGER
  dVSGatewayTgHardwareAddress DisplayString
  dVSGatewayPrimaryAuthenticationServerAddress IpAddress
  dVSGatewayPrimaryAccountingServerAddress IpAddress
  dVSGatewaySecondaryAuthenticationServerAddress IpAddress
  dVSGatewaySecondaryAccountingServerAddress IpAddress
  dVSGatewayUserName DisplayString
  dVSGatewaySecurityParameterIndex INTEGER
  dVSGatewayIPTimeToLive INTEGER
  dVSGatewayRipSourceAddress IpAddress
  dVSGatewayRipLimit INTEGER
  dVSGatewayRipTimeout INTEGER
  dVSGatewayDhcpEnable Boolean
  dVSGatewayDhcpPrefServerAddr IpAddress
  dVSGatewayDhcpPrefServerAddr2 IpAddress

Defined Values

aptisConfigModule 1.3.6.1.4.1.2637.1.1.3
The following tables describe the configurable elements of an Aptis box.
MODULE-IDENTITY    

callInfoTable 1.3.6.1.4.1.2637.2.1.4002
Call Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CallInfoEntry

callInfoEntry 1.3.6.1.4.1.2637.2.1.4002.1
This is the structure of entries in the callInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CallInfoEntry  

callInfoPathString 1.3.6.1.4.1.2637.2.1.4002.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

callInfoRowStatus 1.3.6.1.4.1.2637.2.1.4002.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

callInfoKeyValue 1.3.6.1.4.1.2637.2.1.4002.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoShelf 1.3.6.1.4.1.2637.2.1.4002.1.11
CVX shelf number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoSlot 1.3.6.1.4.1.2637.2.1.4002.1.12
CVX slot number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoPort 1.3.6.1.4.1.2637.2.1.4002.1.13
CVX DSL port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoDs0 1.3.6.1.4.1.2637.2.1.4002.1.14
CVX DS0.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoVpopId 1.3.6.1.4.1.2637.2.1.4002.1.15
CVX VPOP id.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCallType 1.3.6.1.4.1.2637.2.1.4002.1.20
bit field indicating call type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoFeature 1.3.6.1.4.1.2637.2.1.4002.1.21
CVX feature.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCallingNumberType 1.3.6.1.4.1.2637.2.1.4002.1.30
Calling number type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCallingNumberPlan 1.3.6.1.4.1.2637.2.1.4002.1.31
Calling number plan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCallingOptions 1.3.6.1.4.1.2637.2.1.4002.1.32
Calling number options.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCallingNumber 1.3.6.1.4.1.2637.2.1.4002.1.33
Calling number.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

callInfoCallingSubaddressType 1.3.6.1.4.1.2637.2.1.4002.1.34
Calling number subaddress type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCallingSubaddress 1.3.6.1.4.1.2637.2.1.4002.1.35
Calling number subaddress.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

callInfoCalledNumberType 1.3.6.1.4.1.2637.2.1.4002.1.40
Called number type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCalledNumberPlan 1.3.6.1.4.1.2637.2.1.4002.1.41
Called number plan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCalledOptions 1.3.6.1.4.1.2637.2.1.4002.1.42
Called number options.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCalledNumber 1.3.6.1.4.1.2637.2.1.4002.1.43
Called number.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

callInfoCalledSubaddressType 1.3.6.1.4.1.2637.2.1.4002.1.44
Called number subaddress type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCalledSubaddress 1.3.6.1.4.1.2637.2.1.4002.1.45
Called number subaddress.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

callInfoCallBearerType 1.3.6.1.4.1.2637.2.1.4002.1.46
Call bearer type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callInfoCallBearerRate 1.3.6.1.4.1.2637.2.1.4002.1.47
Call bearer rate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casConfigTable 1.3.6.1.4.1.2637.2.1.2507
Channel Associated Signalling.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CasConfigEntry

casConfigEntry 1.3.6.1.4.1.2637.2.1.2507.1
This is the structure of entries in the casConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CasConfigEntry  

casConfigPathString 1.3.6.1.4.1.2637.2.1.2507.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

casConfigRowStatus 1.3.6.1.4.1.2637.2.1.2507.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

casConfigKeyValue 1.3.6.1.4.1.2637.2.1.2507.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casConfigSigBitType 1.3.6.1.4.1.2637.2.1.2507.1.11
Country specific signaling bit type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ccitt(1)  

casConfigR2Type 1.3.6.1.4.1.2637.2.1.2507.1.12
Country specific R2 switch type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ccitt(1), brazil(2), stmartin(3), nzealand(4), china(5), mexico(6), argentina(7), korea(8), philippines(9), thailand(10), malaysia(11), indonesia(12), israel(13), macau(14), india(15), venezuela(16)  

casConfigMaxCalledDigits 1.3.6.1.4.1.2637.2.1.2507.1.13
Maximum number of expected DNIS digits (called number) in an incoming call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32  

casConfigMaxCallingDigits 1.3.6.1.4.1.2637.2.1.2507.1.14
Maximum number of expected ANI digits (calling number) in an incoming call. Used in India.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32  

casConfigReqCallingNumber 1.3.6.1.4.1.2637.2.1.2507.1.15
Request calling number from remote end.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casConfigCallingNumberMandatory 1.3.6.1.4.1.2637.2.1.2507.1.16
Calling Number is mandatory on incoming calls. When not available, incoming call will be rejected.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casConfigRingBack 1.3.6.1.4.1.2637.2.1.2507.1.17
Enable audible ring back to remote end.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casConfigCdBits 1.3.6.1.4.1.2637.2.1.2507.1.18
Country specific pattern for signaling bits C and D.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER cd01(1), cd11(2)  

casConfigAssumeAcceptCall 1.3.6.1.4.1.2637.2.1.2507.1.19
Assume all R2 calls will be accepted regardless of calling/called numbers. This parameter is used after inWaitAccept timer expires with no response from security server.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casConfigOOS 1.3.6.1.4.1.2637.2.1.2507.1.20
Indicates the state of the channel. If true, the channel is in out-of-service state. If false, the channel is in-service
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casConfigBusyOutOOS 1.3.6.1.4.1.2637.2.1.2507.1.21
Determines a channel's appearance when in out-of-service state. If true, the channel appears busy (off-hook). If false, the channel remains on-hook, but will not answer calls
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casConfigWinkAfterAnswer 1.3.6.1.4.1.2637.2.1.2507.1.22
Wink After Answer, when active, will drop an incoming call for 100 msec. Used in some countries (Brazil) to reject collect calls.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casConfigSkipCategoryRequest 1.3.6.1.4.1.2637.2.1.2507.1.23
Do not request the caller's category on an incoming call, set speech condition. Used in Korea.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

casTimersTable 1.3.6.1.4.1.2637.2.1.2508
Channel Associated Signalling Timers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CasTimersEntry

casTimersEntry 1.3.6.1.4.1.2637.2.1.2508.1
This is the structure of entries in the casTimersTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CasTimersEntry  

casTimersPathString 1.3.6.1.4.1.2637.2.1.2508.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

casTimersRowStatus 1.3.6.1.4.1.2637.2.1.2508.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

casTimersKeyValue 1.3.6.1.4.1.2637.2.1.2508.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersHitThresh 1.3.6.1.4.1.2637.2.1.2508.1.11
The amount of time a signaling bit pattern must be stable before it is considered to have changed value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersInSeizeHold 1.3.6.1.4.1.2637.2.1.2508.1.12
The minimum duration of an incoming off-hook pattern to be considered a valid line seizure.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersOutSeizeHold 1.3.6.1.4.1.2637.2.1.2508.1.13
The minimum duration of off-hook signal to seize line for an outgoing call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersOutWaitSeizeAck 1.3.6.1.4.1.2637.2.1.2508.1.14
The maximum allowed seizure-acknowledge delay.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersOutWaitConnect 1.3.6.1.4.1.2637.2.1.2508.1.15
The maximum delay before receiving a connect indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersOutConnectHold 1.3.6.1.4.1.2637.2.1.2508.1.16
The minimum duration of an off-hook pattern to be considered a valid connect indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersLocalRelease 1.3.6.1.4.1.2637.2.1.2508.1.17
The maximum delay to release local system resources
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersLineRelease 1.3.6.1.4.1.2637.2.1.2508.1.18
When locally releasing a call, the maximum delay before receiving a line-release indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersLineReleaseHold 1.3.6.1.4.1.2637.2.1.2508.1.19
The minimum duration of an on-hook pattern to be considered a valid line-release indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersRecover 1.3.6.1.4.1.2637.2.1.2508.1.20
The minimum duration of 'blind' period after each incoming or outgoing call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersWaitR2Digit 1.3.6.1.4.1.2637.2.1.2508.1.21
The maximum waiting period for an incoming R2 digit, before dropping the call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersInWaitAccept 1.3.6.1.4.1.2637.2.1.2508.1.22
The maximum waiting period for the CVX to process calling/called numbers before proceeding with the R2 call sequence accepting or rejecting an incoming call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersInWaitAnswer 1.3.6.1.4.1.2637.2.1.2508.1.23
The maximum waiting period before the CVX answers an incoming call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersOutWaitAnswer 1.3.6.1.4.1.2637.2.1.2508.1.24
The maximum waiting period before the remote end answers the CVX's outbound call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersInCongestionPulseDuration 1.3.6.1.4.1.2637.2.1.2508.1.25
Duration of the congestion A-4 pulse. This backward pulse is sent on incoming calls, when no response is received for an excessive period of time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersInSetupCompleteHold 1.3.6.1.4.1.2637.2.1.2508.1.26
Delay between reception of last inbound digit and begin ringing (Q.471/Q.475). For New Zealand, this parameter should be set to 1900 msec.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersInAnswerToWinkDelay 1.3.6.1.4.1.2637.2.1.2508.1.27
After an incoming call is answered, an optional wink may be sent to the switch, to reject collect a call. This parameter specifies how long to wait, after the call is answered, before transmitting a wink.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersInAfterAnswerWinkPulse 1.3.6.1.4.1.2637.2.1.2508.1.28
Duration of the wink sent after an incoming call is answered. This optional wink pulse is used in Brazil to filter incoming collect calls.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersOutLineAbnormalReleaseHold 1.3.6.1.4.1.2637.2.1.2508.1.29
Hold period for an abnormal line release condition on an outbound call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

casTimersOutLocalReleaseDelay 1.3.6.1.4.1.2637.2.1.2508.1.30
Delay between the local disconnect on outbound calls, and the transmission of the local line release bits.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

clockRecoveryTable 1.3.6.1.4.1.2637.2.1.2900
Clock Recovery Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClockRecoveryEntry

clockRecoveryEntry 1.3.6.1.4.1.2637.2.1.2900.1
This is the structure of entries in the clockRecoveryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ClockRecoveryEntry  

clockRecoveryPathString 1.3.6.1.4.1.2637.2.1.2900.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

clockRecoveryRowStatus 1.3.6.1.4.1.2637.2.1.2900.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

clockRecoveryKeyValue 1.3.6.1.4.1.2637.2.1.2900.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

clockRecoveryPrimarySlot 1.3.6.1.4.1.2637.2.1.2900.1.11
Clocking Primary Clock Source Slot
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), slot1(1), slot2(2), slot3(3), slot4(4), slot5(5), slot6(6), slot7(7), slot8(8), slot11(11), slot12(12), slot13(13), slot14(14), slot15(15), slot16(16), slot17(17), slot18(18)  

clockRecoveryPrimaryPort 1.3.6.1.4.1.2637.2.1.2900.1.12
Clocking Primary Source Slot Port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ds11(0), ds12(1), ds13(2), ds14(3), ds15(4), ds16(5), ds17(6), ds18(7), ds19(8), ds110(9), ds111(10), ds112(11), ds113(12), ds114(13), ds115(14), ds116(15), ds117(16), ds118(17), ds119(18), ds120(19), ds121(20), ds122(21), ds123(22), ds124(23), ds125(24), ds126(25), ds127(26), ds128(27), ds129(28), ds130(29), ds131(30), ds132(31), ds133(32), ds134(33), ds135(34), ds136(35), ds137(36), ds138(37), ds139(38), ds140(39), ds141(40), ds142(41), ds143(42), ds144(43), ds145(44), ds146(45), ds147(46), ds148(47), ds149(48), ds150(49), ds151(50), ds152(51), ds153(52), ds154(53), ds155(54), ds156(55), external(97), revertive(98), nonRevertive(99), disabled(255)  

clockRecoverySecondarySlot 1.3.6.1.4.1.2637.2.1.2900.1.13
Clocking Secondary Clock Source Slot.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), slot1(1), slot2(2), slot3(3), slot4(4), slot5(5), slot6(6), slot7(7), slot8(8), slot11(11), slot12(12), slot13(13), slot14(14), slot15(15), slot16(16), slot17(17), slot18(18)  

clockRecoverySecondaryPort 1.3.6.1.4.1.2637.2.1.2900.1.14
Clocking Secondary Clock Source Slot Port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ds11(0), ds12(1), ds13(2), ds14(3), ds15(4), ds16(5), ds17(6), ds18(7), ds19(8), ds110(9), ds111(10), ds112(11), ds113(12), ds114(13), ds115(14), ds116(15), ds117(16), ds118(17), ds119(18), ds120(19), ds121(20), ds122(21), ds123(22), ds124(23), ds125(24), ds126(25), ds127(26), ds128(27), ds129(28), ds130(29), ds131(30), ds132(31), ds133(32), ds134(33), ds135(34), ds136(35), ds137(36), ds138(37), ds139(38), ds140(39), ds141(40), ds142(41), ds143(42), ds144(43), ds145(44), ds146(45), ds147(46), ds148(47), ds149(48), ds150(49), ds151(50), ds152(51), ds153(52), ds154(53), ds155(54), ds156(55), external(97), revertive(98), nonRevertive(99), disabled(255)  

clockRecoveryPrimaryT3 1.3.6.1.4.1.2637.2.1.2900.1.15
Clocking Source Primary T3.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER t31(0), t32(1)  

clockRecoverySecondaryT3 1.3.6.1.4.1.2637.2.1.2900.1.16
Clocking Source Secondary T3.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER t31(0), t32(1)  

ds0ConfigTable 1.3.6.1.4.1.2637.2.1.2111
DS0 Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds0ConfigEntry

ds0ConfigEntry 1.3.6.1.4.1.2637.2.1.2111.1
This is the structure of entries in the ds0ConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ds0ConfigEntry  

ds0ConfigPathString 1.3.6.1.4.1.2637.2.1.2111.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ds0ConfigRowStatus 1.3.6.1.4.1.2637.2.1.2111.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ds0ConfigKeyValue 1.3.6.1.4.1.2637.2.1.2111.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ds0ConfigAdminState 1.3.6.1.4.1.2637.2.1.2111.1.11
DS0 configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

e1ConfigTable 1.3.6.1.4.1.2637.2.1.2501
E1 Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E1ConfigEntry

e1ConfigEntry 1.3.6.1.4.1.2637.2.1.2501.1
This is the structure of entries in the e1ConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  E1ConfigEntry  

e1ConfigPathString 1.3.6.1.4.1.2637.2.1.2501.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

e1ConfigRowStatus 1.3.6.1.4.1.2637.2.1.2501.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

e1ConfigKeyValue 1.3.6.1.4.1.2637.2.1.2501.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

e1ConfigAdminState 1.3.6.1.4.1.2637.2.1.2501.1.11
E1 configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3), transmitAis(4)  

e1ConfigLineFraming 1.3.6.1.4.1.2637.2.1.2501.1.13
E1 line framing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER e1(1), e1Crc(2), e1CrcNoE(3)  

e1ConfigLineCode 1.3.6.1.4.1.2637.2.1.2501.1.14
E1 line encoding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hdb3(1), ami(2)  

e1ConfigLineBuildout 1.3.6.1.4.1.2637.2.1.2501.1.15
E1 line build out attenuation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER shortHaul(1), longHaul(2)  

e1ConfigSignaling 1.3.6.1.4.1.2637.2.1.2501.1.16
E1 line signaling method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER isdn(2), cas(3), ss7(4)  

e1ConfigClockingPriority 1.3.6.1.4.1.2637.2.1.2501.1.17
rank this interface for clocking selection (1-9).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..9  

e1ConfigLoopBack 1.3.6.1.4.1.2637.2.1.2501.1.19
E1 loop back method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), line(2)  

e1ConfigDefaultNumber 1.3.6.1.4.1.2637.2.1.2501.1.20
Phone Number specified in incoming calls if none is provided by the network. Also used in outgoing calls if no number is specified.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

e1ConfigOverrideNumber 1.3.6.1.4.1.2637.2.1.2501.1.21
Phone Number forced on incoming calls if none is provided by the network. Also used in outgoing calls, and outgoing calls.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

e1ConfigCircuitID 1.3.6.1.4.1.2637.2.1.2501.1.22
Descriptive name of this interface
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..80)  

e1ConfigAlarmCriteria 1.3.6.1.4.1.2637.2.1.2501.1.23
E1 Layer 1 alarm criteria
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER iTUT(2), iTUTNet(3)  

e1TrunkconfigTable 1.3.6.1.4.1.2637.2.1.2505
E1 Trunk Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E1TrunkconfigEntry

e1TrunkconfigEntry 1.3.6.1.4.1.2637.2.1.2505.1
This is the structure of entries in the e1TrunkconfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  E1TrunkconfigEntry  

e1TrunkconfigPathString 1.3.6.1.4.1.2637.2.1.2505.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

e1TrunkconfigRowStatus 1.3.6.1.4.1.2637.2.1.2505.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

e1TrunkconfigKeyValue 1.3.6.1.4.1.2637.2.1.2505.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

e1TrunkconfigAdminState 1.3.6.1.4.1.2637.2.1.2505.1.11
E1 trunk configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

e1TrunkconfigClockSource 1.3.6.1.4.1.2637.2.1.2505.1.12
E1 trunk clock source.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER port1(1), port2(2), port3(3), port4(4), port5(5), port6(6), port7(7), port8(8), local(100), recover(101)  

e1TrunkconfigLineFraming 1.3.6.1.4.1.2637.2.1.2505.1.13
E1 trunk line framing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER e1(1), e1Crc(2), e1CrcNoE(3)  

e1TrunkconfigLineCode 1.3.6.1.4.1.2637.2.1.2505.1.14
E1 trunk line encoding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hdb3(1), ami(2)  

e1TrunkconfigLineBuildout 1.3.6.1.4.1.2637.2.1.2505.1.15
E1 trunk line build out attenuation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER shortHaul(1), longHaul(2)  

e1liuConfigTable 1.3.6.1.4.1.2637.2.1.2510
E1 Channel Line Interface Unit Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E1liuConfigEntry

e1liuConfigEntry 1.3.6.1.4.1.2637.2.1.2510.1
This is the structure of entries in the e1liuConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  E1liuConfigEntry  

e1liuConfigPathString 1.3.6.1.4.1.2637.2.1.2510.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

e1liuConfigRowStatus 1.3.6.1.4.1.2637.2.1.2510.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

e1liuConfigKeyValue 1.3.6.1.4.1.2637.2.1.2510.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

e1liuConfigAdminState 1.3.6.1.4.1.2637.2.1.2510.1.11
E1 Channel LIU adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

e1liuConfigCircuitID 1.3.6.1.4.1.2637.2.1.2510.1.12
Identifier for this Line Termination Module.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

hdlcConfigTable 1.3.6.1.4.1.2637.2.1.1452
High Level Data Link Control Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HdlcConfigEntry

hdlcConfigEntry 1.3.6.1.4.1.2637.2.1.1452.1
This is the structure of entries in the hdlcConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HdlcConfigEntry  

hdlcConfigPathString 1.3.6.1.4.1.2637.2.1.1452.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

hdlcConfigRowStatus 1.3.6.1.4.1.2637.2.1.1452.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hdlcConfigKeyValue 1.3.6.1.4.1.2637.2.1.1452.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hdlcConfigStrategy 1.3.6.1.4.1.2637.2.1.1452.1.11
HDLC Configuration.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER x64K(1), x56K(2), x64K56K(3), x56K64K(4)  

hdlcConfigConnectTimeout 1.3.6.1.4.1.2637.2.1.1452.1.12
The time (in milliseconds) allowed for the HDLC controller to synchronize with the remote HDLC.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 250..10000  

hSSIConfigTable 1.3.6.1.4.1.2637.2.1.3151
High Speed Serial Interface (HSSI) Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HSSIConfigEntry

hSSIConfigEntry 1.3.6.1.4.1.2637.2.1.3151.1
This is the structure of entries in the hSSIConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HSSIConfigEntry  

hSSIConfigPathString 1.3.6.1.4.1.2637.2.1.3151.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

hSSIConfigRowStatus 1.3.6.1.4.1.2637.2.1.3151.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hSSIConfigKeyValue 1.3.6.1.4.1.2637.2.1.3151.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hSSIConfigHSSIPhyPort 1.3.6.1.4.1.2637.2.1.3151.1.11
This value indicates the physical port identifier for this slot.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1  

hSSIConfigHSSIEnable 1.3.6.1.4.1.2637.2.1.3151.1.12
Specifies whether the HSSI interface is to be activated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hSSIConfigHSSIName 1.3.6.1.4.1.2637.2.1.3151.1.13
HSSI Name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

hSSIConfigHSSIDelineation 1.3.6.1.4.1.2637.2.1.3151.1.14
For the given HSSI, flag sequence insertion and bit stuffing is performed on the data stream. If TRUE, then flag sequence insertion and bit stuffing is performed.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

hSSIConfigHSSICRCType 1.3.6.1.4.1.2637.2.1.3151.1.15
HSSI CRC generation for outgoing data stream. CRCTYPE is ignored when HSSI Delineation is FALSE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER crcNone(0), crc16(1), crc32(2)  

hSSIConfigHSSIIdle 1.3.6.1.4.1.2637.2.1.3151.1.16
Indicates that the HSSI should use flag bytes or HDLC idle as the interframe time fill between HSSI packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER flagBytes(0), hdlcIdle(1)  

hSSIConfigHSSILoopback 1.3.6.1.4.1.2637.2.1.3151.1.17
Indicates that the HSSI should be put into internal loopback mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hSSIConfigHSSIClock 1.3.6.1.4.1.2637.2.1.3151.1.18
Indicates that the HSSI should be put into internal or external clocking.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

hSSIConfigHSSIQueueDepth 1.3.6.1.4.1.2637.2.1.3151.1.19
Internal queue depth for data to be transmitted by HSSI. Once queue depth is reached, data will be dropped until queue depth empties beyond this value. Data dropped is clipped from end of queue.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1000  

cHdlcTable 1.3.6.1.4.1.2637.2.1.1210
Cisco High Level Data Link Control Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CHdlcEntry

cHdlcEntry 1.3.6.1.4.1.2637.2.1.1210.1
This is the structure of entries in the cHdlcTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CHdlcEntry  

cHdlcPathString 1.3.6.1.4.1.2637.2.1.1210.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cHdlcRowStatus 1.3.6.1.4.1.2637.2.1.1210.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cHdlcKeyValue 1.3.6.1.4.1.2637.2.1.1210.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

cHdlcIpAddr 1.3.6.1.4.1.2637.2.1.1210.1.11
IP Address for local side of connection.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

cHdlcIpMask 1.3.6.1.4.1.2637.2.1.1210.1.12
IP Address mask for local side of connection.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

cHdlcMaxMissedKeepalives 1.3.6.1.4.1.2637.2.1.1210.1.13
Maximum number of missed keep-alive messages.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

cHdlcMaxLoopCount 1.3.6.1.4.1.2637.2.1.1210.1.14
Maximum number of loopback packets before connection is dropped.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCleartcpTable 1.3.6.1.4.1.2637.2.1.1230
Clear TCP Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCleartcpEntry

ipCleartcpEntry 1.3.6.1.4.1.2637.2.1.1230.1
This is the structure of entries in the ipCleartcpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCleartcpEntry  

ipCleartcpPathString 1.3.6.1.4.1.2637.2.1.1230.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipCleartcpRowStatus 1.3.6.1.4.1.2637.2.1.1230.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipCleartcpKeyValue 1.3.6.1.4.1.2637.2.1.1230.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCleartcpLocalIp 1.3.6.1.4.1.2637.2.1.1230.1.11
IP Address for local side of connection.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipCleartcpLocalPort 1.3.6.1.4.1.2637.2.1.1230.1.12
IP port for local side of connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCleartcpLocalPortAllocated 1.3.6.1.4.1.2637.2.1.1230.1.13
If TRUE, pool allocated for session.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCleartcpRemoteHostname 1.3.6.1.4.1.2637.2.1.1230.1.14
DNS name of remote TCP server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipCleartcpRemotePort 1.3.6.1.4.1.2637.2.1.1230.1.15
IP port of remote TCP server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCleartcpConnectType 1.3.6.1.4.1.2637.2.1.1230.1.16
Connection methodology.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER telnet(1), rlogin(2), cleartcp(3), shell(4)  

ipCleartcpTcpConnectTimeout 1.3.6.1.4.1.2637.2.1.1230.1.17
Connect (syn-ack) timeout.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCleartcpHostIpCount 1.3.6.1.4.1.2637.2.1.1230.1.20
Number of IP Addresses to try.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32  

ipCleartcpHostIpList 1.3.6.1.4.1.2637.2.1.1230.1.21
List of IP Addresses to try (up to 32).
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

ipRtrConfigTable 1.3.6.1.4.1.2637.2.1.1006
System-wide IP router options
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRtrConfigEntry

ipRtrConfigEntry 1.3.6.1.4.1.2637.2.1.1006.1
This is the structure of entries in the ipRtrConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRtrConfigEntry  

ipRtrConfigPathString 1.3.6.1.4.1.2637.2.1.1006.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRtrConfigRowStatus 1.3.6.1.4.1.2637.2.1.1006.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRtrConfigKeyValue 1.3.6.1.4.1.2637.2.1.1006.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRtrConfigRoutingEnabled 1.3.6.1.4.1.2637.2.1.1006.1.11
ip routing enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRtrConfigMulticastEnabled 1.3.6.1.4.1.2637.2.1.1006.1.12
ip multicast enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRtrConfigDefaultTtl 1.3.6.1.4.1.2637.2.1.1006.1.13
default ip time-to-live (count)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRtrConfigArpTtl 1.3.6.1.4.1.2637.2.1.1006.1.14
default arp time-to-live (seconds)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRtrConfigSpoofCheckEnabled 1.3.6.1.4.1.2637.2.1.1006.1.15
enable check for spoofed IP addresses
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRtrConfigChecksumEnabled 1.3.6.1.4.1.2637.2.1.1006.1.17
enable checksum check of routed packets
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRtrConfigSourceRouteEnabled 1.3.6.1.4.1.2637.2.1.1006.1.18
enable routing of source routed packets
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRtrConfigRouterDiscovery 1.3.6.1.4.1.2637.2.1.1006.1.19
control for router discovery advertisements
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), onRequest(1), enabled(2)  

ipRtrConfigSnmpSysDesc 1.3.6.1.4.1.2637.2.1.1006.1.110
snmp system description variable
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..200)  

ipRtrConfigSnmpContactName 1.3.6.1.4.1.2637.2.1.1006.1.111
snmp contact name variable
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..200)  

ipRtrConfigSnmpSysName 1.3.6.1.4.1.2637.2.1.1006.1.112
snmp system name variable
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..200)  

ipRtrConfigSnmpSysLocation 1.3.6.1.4.1.2637.2.1.1006.1.113
snmp system location variable
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..200)  

ipRtrConfigSessionUnwindsMax 1.3.6.1.4.1.2637.2.1.1006.1.116
Maximum number of consecutive IP packets to forward from sessions
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..100  

ipRtrConfigTrunkUnwindsMax 1.3.6.1.4.1.2637.2.1.1006.1.117
Maximum number of consective IP packets to forward from trunks
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..100  

ipRtrConfigRouteCacheEnabled 1.3.6.1.4.1.2637.2.1.1006.1.118
use IP route cache to forward datagrams
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipMulticastConfigTable 1.3.6.1.4.1.2637.2.1.1007
system-wide IP multicast router options
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpMulticastConfigEntry

ipMulticastConfigEntry 1.3.6.1.4.1.2637.2.1.1007.1
This is the structure of entries in the ipMulticastConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpMulticastConfigEntry  

ipMulticastConfigPathString 1.3.6.1.4.1.2637.2.1.1007.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipMulticastConfigRowStatus 1.3.6.1.4.1.2637.2.1.1007.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipMulticastConfigKeyValue 1.3.6.1.4.1.2637.2.1.1007.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipMulticastConfigTrunkRoutingEnabled 1.3.6.1.4.1.2637.2.1.1007.1.11
route ip multicast between trunk interfaces
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipMulticastConfigHeartbeatEnabled 1.3.6.1.4.1.2637.2.1.1007.1.20
ip multicast heartbeat detection enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipMulticastConfigHeartbeatGroup 1.3.6.1.4.1.2637.2.1.1007.1.21
multicast group heartbeat is sent to
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipMulticastConfigHeartbeatPort 1.3.6.1.4.1.2637.2.1.1007.1.22
UDP port heartbeat is sent to
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipMulticastConfigHeartbeatTimeout 1.3.6.1.4.1.2637.2.1.1007.1.23
seconds before heartbeat timeout occurs
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipMulticastConfigHeartbeatSource 1.3.6.1.4.1.2637.2.1.1007.1.24
source address/net of heartbeat packets (0.0.0.0 = any)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipMulticastConfigHeartbeatSourceMask 1.3.6.1.4.1.2637.2.1.1007.1.25
mask used to match source address/net
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipMulticastConfigHeartbeatThreshold 1.3.6.1.4.1.2637.2.1.1007.1.26
Minimum number of heartbeats expected during the heartbeat period
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10000  

ipMulticastConfigHeartbeatPeriod 1.3.6.1.4.1.2637.2.1.1007.1.27
Alotted time (seconds) for receiving the heartbeat threshold
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10000  

ipVrouterConfigTable 1.3.6.1.4.1.2637.2.1.1016
virtual router configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpVrouterConfigEntry

ipVrouterConfigEntry 1.3.6.1.4.1.2637.2.1.1016.1
This is the structure of entries in the ipVrouterConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpVrouterConfigEntry  

ipVrouterConfigPathString 1.3.6.1.4.1.2637.2.1.1016.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipVrouterConfigRowStatus 1.3.6.1.4.1.2637.2.1.1016.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipVrouterConfigKeyValue 1.3.6.1.4.1.2637.2.1.1016.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipVrouterConfigRouterType 1.3.6.1.4.1.2637.2.1.1016.1.11
Virtual router type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER local(0)  

ipVrouterConfigTrunkingType 1.3.6.1.4.1.2637.2.1.1016.1.12
Virtual router trunking type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER shared(0), dedicated(1)  

ipPolicyEntryTable 1.3.6.1.4.1.2637.2.1.1017
IP Routing Policy Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpPolicyEntryEntry

ipPolicyEntryEntry 1.3.6.1.4.1.2637.2.1.1017.1
This is the structure of entries in the ipPolicyEntryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpPolicyEntryEntry  

ipPolicyEntryPathString 1.3.6.1.4.1.2637.2.1.1017.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipPolicyEntryRowStatus 1.3.6.1.4.1.2637.2.1.1017.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipPolicyEntryKeyValue 1.3.6.1.4.1.2637.2.1.1017.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipPolicyEntryAccessList 1.3.6.1.4.1.2637.2.1.1017.1.11
id of access-list to match when applying policy
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipPolicyEntryForceVrouterId 1.3.6.1.4.1.2637.2.1.1017.1.12
if access-list matches, use this vrouter to route packet
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipPolicyEntryForceDestinationIp 1.3.6.1.4.1.2637.2.1.1017.1.13
if access-list matches, use this IP addresss as packet destination
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipRipTrustedTable 1.3.6.1.4.1.2637.2.1.1031
RIP trusted-host entry; one per trusted-host
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRipTrustedEntry

ipRipTrustedEntry 1.3.6.1.4.1.2637.2.1.1031.1
This is the structure of entries in the ipRipTrustedTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRipTrustedEntry  

ipRipTrustedPathString 1.3.6.1.4.1.2637.2.1.1031.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRipTrustedRowStatus 1.3.6.1.4.1.2637.2.1.1031.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRipTrustedKeyValue 1.3.6.1.4.1.2637.2.1.1031.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRipTrustedTrustedHost 1.3.6.1.4.1.2637.2.1.1031.1.11
IP address of valid rip source
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipRipTable 1.3.6.1.4.1.2637.2.1.1030
system-wide RIP configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRipEntry

ipRipEntry 1.3.6.1.4.1.2637.2.1.1030.1
This is the structure of entries in the ipRipTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRipEntry  

ipRipPathString 1.3.6.1.4.1.2637.2.1.1030.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRipRowStatus 1.3.6.1.4.1.2637.2.1.1030.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRipKeyValue 1.3.6.1.4.1.2637.2.1.1030.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRipProtoV1Enabled 1.3.6.1.4.1.2637.2.1.1030.1.11
accept RIP v1 packets?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRipProtoV2Enabled 1.3.6.1.4.1.2637.2.1.1030.1.12
accept RIP v2 packets? (v1compat = v1 + v2)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRipTriggeredUpdatesEnabled 1.3.6.1.4.1.2637.2.1.1030.1.13
send out updates immediately when changes occur
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRipAuthType 1.3.6.1.4.1.2637.2.1.1030.1.14
for RIP V2, the authentication type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), text(1), md5(2)  

ipRipAuthKey 1.3.6.1.4.1.2637.2.1.1030.1.15
for RIP V2, the authentication string
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipOspfAreaTable 1.3.6.1.4.1.2637.2.1.1041
OSPF area entry configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfAreaEntry

ipOspfAreaEntry 1.3.6.1.4.1.2637.2.1.1041.1
This is the structure of entries in the ipOspfAreaTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfAreaEntry  

ipOspfAreaPathString 1.3.6.1.4.1.2637.2.1.1041.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipOspfAreaRowStatus 1.3.6.1.4.1.2637.2.1.1041.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipOspfAreaKeyValue 1.3.6.1.4.1.2637.2.1.1041.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfAreaAreaId 1.3.6.1.4.1.2637.2.1.1041.1.11
OSPF area ID IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfAreaStubAreaEnabled 1.3.6.1.4.1.2637.2.1.1041.1.12
defines area as a stub area
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfAreaNotSoStubbyAreaEnabled 1.3.6.1.4.1.2637.2.1.1041.1.13
defines area as a not-so-stubby-area
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfAreaStubAreaDefaultCost 1.3.6.1.4.1.2637.2.1.1041.1.14
OSPF stub area default cost.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfAreaStubAreaNoSummaryEnabled 1.3.6.1.4.1.2637.2.1.1041.1.15
OSPF stub area summary enabled?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfVirtualLinkTable 1.3.6.1.4.1.2637.2.1.1042
OSPF virtual link entry configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfVirtualLinkEntry

ipOspfVirtualLinkEntry 1.3.6.1.4.1.2637.2.1.1042.1
This is the structure of entries in the ipOspfVirtualLinkTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfVirtualLinkEntry  

ipOspfVirtualLinkPathString 1.3.6.1.4.1.2637.2.1.1042.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipOspfVirtualLinkRowStatus 1.3.6.1.4.1.2637.2.1.1042.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipOspfVirtualLinkKeyValue 1.3.6.1.4.1.2637.2.1.1042.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfVirtualLinkAreaId 1.3.6.1.4.1.2637.2.1.1042.1.11
OSPF VL area IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfVirtualLinkRouterId 1.3.6.1.4.1.2637.2.1.1042.1.12
OSPF VL router IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfVirtualLinkIpAddress 1.3.6.1.4.1.2637.2.1.1042.1.13
OSPF VL IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfVirtualLinkNextRouteripAddress 1.3.6.1.4.1.2637.2.1.1042.1.14
OSPF VL next router IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfVirtualLinkTransitAreaId 1.3.6.1.4.1.2637.2.1.1042.1.15
OSPF VL transit area IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfVirtualLinkHelloInterval 1.3.6.1.4.1.2637.2.1.1042.1.16
OSPF VL hello message interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfVirtualLinkDeadInterval 1.3.6.1.4.1.2637.2.1.1042.1.17
OSPF VL dead interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfVirtualLinkRetransmitInterval 1.3.6.1.4.1.2637.2.1.1042.1.18
OSPF VL retransmit interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfVirtualLinkTransmitDelay 1.3.6.1.4.1.2637.2.1.1042.1.19
OSPF VL transmit delay.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfVirtualLinkAuthType 1.3.6.1.4.1.2637.2.1.1042.1.20
OSPF VL authorization type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), simple(2), md5(3)  

ipOspfVirtualLinkAuthKey 1.3.6.1.4.1.2637.2.1.1042.1.21
OSPF VL authorization key.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..8)  

ipOspfRangeTable 1.3.6.1.4.1.2637.2.1.1045
Adds an address range to an OSPF area
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfRangeEntry

ipOspfRangeEntry 1.3.6.1.4.1.2637.2.1.1045.1
This is the structure of entries in the ipOspfRangeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfRangeEntry  

ipOspfRangePathString 1.3.6.1.4.1.2637.2.1.1045.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipOspfRangeRowStatus 1.3.6.1.4.1.2637.2.1.1045.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipOspfRangeKeyValue 1.3.6.1.4.1.2637.2.1.1045.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfRangeAddress 1.3.6.1.4.1.2637.2.1.1045.1.11
ip address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfRangeMask 1.3.6.1.4.1.2637.2.1.1045.1.12
ip mask
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfRangeAreaId 1.3.6.1.4.1.2637.2.1.1045.1.13
area id
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfRangeAdvertise 1.3.6.1.4.1.2637.2.1.1045.1.14
advertise
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfRangeType 1.3.6.1.4.1.2637.2.1.1045.1.15
type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER type3(3), type7(7)  

ipOspfTable 1.3.6.1.4.1.2637.2.1.1040
OSPF global configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfEntry

ipOspfEntry 1.3.6.1.4.1.2637.2.1.1040.1
This is the structure of entries in the ipOspfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfEntry  

ipOspfPathString 1.3.6.1.4.1.2637.2.1.1040.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipOspfRowStatus 1.3.6.1.4.1.2637.2.1.1040.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipOspfKeyValue 1.3.6.1.4.1.2637.2.1.1040.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfRouterId 1.3.6.1.4.1.2637.2.1.1040.1.11
ID of router; often the IP address of the primary ethernet
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfAutoVirtualLinkEnabled 1.3.6.1.4.1.2637.2.1.1040.1.12
enable automatic creation virtual links?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfTosEnabled 1.3.6.1.4.1.2637.2.1.1040.1.13
enable multiple paths based on Type-of-service
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfAsBorderEnabled 1.3.6.1.4.1.2637.2.1.1040.1.14
enable router to be an ASBR router?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfMaxPaths 1.3.6.1.4.1.2637.2.1.1040.1.15
max # of multiple paths saved for each route
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..5  

ipOspfSpfDelayBeforeRecalc 1.3.6.1.4.1.2637.2.1.1040.1.16
delay time before SPF recalculation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfSpfHoldtimeMinBetweenRecalc 1.3.6.1.4.1.2637.2.1.1040.1.17
minimum hold time between SPF recalcuation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfGenerateDefaultEnabled 1.3.6.1.4.1.2637.2.1.1040.1.18
enable generation of default routes
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfGenerateDefaultMetric 1.3.6.1.4.1.2637.2.1.1040.1.19
enable generation of default metrics
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfGenerateDefaultMetricType 1.3.6.1.4.1.2637.2.1.1040.1.20
enable generation of default metric type
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfStrategy 1.3.6.1.4.1.2637.2.1.1040.1.21
strategy when multiple next-hops exists
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), loadSharing(1), loadSpreading(2)  

ipVpnGroupDestTable 1.3.6.1.4.1.2637.2.1.1060
VPN group entry configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpVpnGroupDestEntry

ipVpnGroupDestEntry 1.3.6.1.4.1.2637.2.1.1060.1
This is the structure of entries in the ipVpnGroupDestTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpVpnGroupDestEntry  

ipVpnGroupDestPathString 1.3.6.1.4.1.2637.2.1.1060.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipVpnGroupDestRowStatus 1.3.6.1.4.1.2637.2.1.1060.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipVpnGroupDestKeyValue 1.3.6.1.4.1.2637.2.1.1060.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipVpnGroupDestVpnId 1.3.6.1.4.1.2637.2.1.1060.1.11
VPN group number
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipVpnGroupDestDlci 1.3.6.1.4.1.2637.2.1.1060.1.12
destination FR DLCI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipVpnGroupDestIpPrefix 1.3.6.1.4.1.2637.2.1.1060.1.13
destination IP net prefix
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipVpnGroupDestIpMask 1.3.6.1.4.1.2637.2.1.1060.1.14
destination IP net mask
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipVpnGroupTable 1.3.6.1.4.1.2637.2.1.1061
VPN to FR/IP mapping entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpVpnGroupEntry

ipVpnGroupEntry 1.3.6.1.4.1.2637.2.1.1061.1
This is the structure of entries in the ipVpnGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpVpnGroupEntry  

ipVpnGroupPathString 1.3.6.1.4.1.2637.2.1.1061.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipVpnGroupRowStatus 1.3.6.1.4.1.2637.2.1.1061.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipVpnGroupKeyValue 1.3.6.1.4.1.2637.2.1.1061.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipVpnGroupType 1.3.6.1.4.1.2637.2.1.1061.1.11
VPN group type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER fr(1), ppp(2)  

ipVpnGroupVpnId 1.3.6.1.4.1.2637.2.1.1061.1.12
VPN number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipVpnGroupFrDlciMapCount 1.3.6.1.4.1.2637.2.1.1061.1.13
VPN FR Data Link Connection Id map count.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipVpnGroupFrDlciMap1 1.3.6.1.4.1.2637.2.1.1061.1.14
VPN FR DLCI map IP Address #1.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipVpnGroupFrDlciMap2 1.3.6.1.4.1.2637.2.1.1061.1.15
VPN FR DLCI map IP Address #2.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipVpnGroupFrDlciMap3 1.3.6.1.4.1.2637.2.1.1061.1.16
VPN FR DLCI map IP Address #3.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipVpnGroupFrDlciMap4 1.3.6.1.4.1.2637.2.1.1061.1.17
VPN FR DLCI map IP Address #4.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipVpnGroupFrDlciMap5 1.3.6.1.4.1.2637.2.1.1061.1.18
VPN FR DLCI map IP Address #5.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAccessListTable 1.3.6.1.4.1.2637.2.1.1065
ip access list filter entry; defines part of IP filter
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAccessListEntry

ipAccessListEntry 1.3.6.1.4.1.2637.2.1.1065.1
This is the structure of entries in the ipAccessListTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAccessListEntry  

ipAccessListPathString 1.3.6.1.4.1.2637.2.1.1065.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAccessListRowStatus 1.3.6.1.4.1.2637.2.1.1065.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAccessListKeyValue 1.3.6.1.4.1.2637.2.1.1065.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAccessListId 1.3.6.1.4.1.2637.2.1.1065.1.11
id number to which this filter entry applies
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAccessListMode 1.3.6.1.4.1.2637.2.1.1065.1.12
set to drop or pass packet if entry matches
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipAccessListProtocol 1.3.6.1.4.1.2637.2.1.1065.1.13
IP protocol field to match
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(0), icmp(1), igmp(2), tcp(6), udp(17), ospf(89)  

ipAccessListSourceIp 1.3.6.1.4.1.2637.2.1.1065.1.20
source IP address prefix to match
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAccessListSourceMask 1.3.6.1.4.1.2637.2.1.1065.1.21
mask applied to source IP address before matching
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAccessListDestinationIp 1.3.6.1.4.1.2637.2.1.1065.1.22
destination IP address prefix to match
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAccessListDestinationMask 1.3.6.1.4.1.2637.2.1.1065.1.23
mask applied to destination IP address before matching
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAccessListCompare 1.3.6.1.4.1.2637.2.1.1065.1.30
method of comparison for destination UDP/TCP port
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), eq(1), gt(2), lt(3)  

ipAccessListDestinationPort 1.3.6.1.4.1.2637.2.1.1065.1.31
if protocol is UDP or TCP, the port number to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipAccessListIcmpType 1.3.6.1.4.1.2637.2.1.1065.1.32
if protocol is ICMP, the ICMP type to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ipAccessListIcmpCode 1.3.6.1.4.1.2637.2.1.1065.1.33
if protocol is ICMP, the ICMP code to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ipAccessListIgmpType 1.3.6.1.4.1.2637.2.1.1065.1.34
if protocol is IGMP, the IGMP type to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ipAccessListTcpFlag 1.3.6.1.4.1.2637.2.1.1065.1.35
if protocol is TCP, the TCP flags to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), any(1), established(2)  

ipFilterListTable 1.3.6.1.4.1.2637.2.1.1066
ip filter list configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFilterListEntry

ipFilterListEntry 1.3.6.1.4.1.2637.2.1.1066.1
This is the structure of entries in the ipFilterListTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpFilterListEntry  

ipFilterListPathString 1.3.6.1.4.1.2637.2.1.1066.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipFilterListRowStatus 1.3.6.1.4.1.2637.2.1.1066.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipFilterListKeyValue 1.3.6.1.4.1.2637.2.1.1066.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipFilterListName 1.3.6.1.4.1.2637.2.1.1066.1.11
Corresponds to the Filter-Id string optionally supplied by a RADIUS server in an Access-Accept packet at user authentication time.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

ipFilterListInputAccessListId 1.3.6.1.4.1.2637.2.1.1066.1.12
id of an IP access list for use in the inbound direction
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipFilterListOutputAccessListId 1.3.6.1.4.1.2637.2.1.1066.1.13
id of an IP access list for use in the outbound direction
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipIfnumberTable 1.3.6.1.4.1.2637.2.1.1072
per-interface configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpIfnumberEntry

ipIfnumberEntry 1.3.6.1.4.1.2637.2.1.1072.1
This is the structure of entries in the ipIfnumberTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpIfnumberEntry  

ipIfnumberPathString 1.3.6.1.4.1.2637.2.1.1072.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipIfnumberRowStatus 1.3.6.1.4.1.2637.2.1.1072.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipIfnumberKeyValue 1.3.6.1.4.1.2637.2.1.1072.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipIfnumberIfIndex 1.3.6.1.4.1.2637.2.1.1072.1.12
ifIndex
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipIfnumberClass 1.3.6.1.4.1.2637.2.1.1072.1.13
driver class to bind to
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER driver(1), protocol(2), filter(3)  

ipIfnumberSubclass 1.3.6.1.4.1.2637.2.1.1072.1.14
driver subclass to bind to
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ethernet(100), hssi(101), hdlc(103), loopback(104), ppp(200), fr(201), ip(203)  

ipIfnumberInstance 1.3.6.1.4.1.2637.2.1.1072.1.15
driver instance to bind to
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitTable 1.3.6.1.4.1.2637.2.1.1073
ip router circuit configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCircuitEntry

ipCircuitEntry 1.3.6.1.4.1.2637.2.1.1073.1
This is the structure of entries in the ipCircuitTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCircuitEntry  

ipCircuitPathString 1.3.6.1.4.1.2637.2.1.1073.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipCircuitRowStatus 1.3.6.1.4.1.2637.2.1.1073.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipCircuitKeyValue 1.3.6.1.4.1.2637.2.1.1073.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitType 1.3.6.1.4.1.2637.2.1.1073.1.11
circuit type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER static(1), session(2)  

ipCircuitIfIndex 1.3.6.1.4.1.2637.2.1.1073.1.12
ifIndex
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipCircuitDescription 1.3.6.1.4.1.2637.2.1.1073.1.16
interface description string
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

ipCircuitMtu 1.3.6.1.4.1.2637.2.1.1073.1.17
max transmission size
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitSpeed 1.3.6.1.4.1.2637.2.1.1073.1.18
bits per second
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitNumbered 1.3.6.1.4.1.2637.2.1.1073.1.19
is interface numbered?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitIpLocal 1.3.6.1.4.1.2637.2.1.1073.1.20
assigned address of interface (local side)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipCircuitIpRemote 1.3.6.1.4.1.2637.2.1.1073.1.21
assigned address of remote side (if p-to-p link)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipCircuitIpMask 1.3.6.1.4.1.2637.2.1.1073.1.22
address mask of interface
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipCircuitArpResponseEnabled 1.3.6.1.4.1.2637.2.1.1073.1.23
arp enabled ?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitArpProxyEnabled 1.3.6.1.4.1.2637.2.1.1073.1.24
respond with proxy arp for subnets on other interfaces?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitAdvertiseRoute 1.3.6.1.4.1.2637.2.1.1073.1.25
advertise route to circuit's network
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitOutputQueueMaxDepth 1.3.6.1.4.1.2637.2.1.1073.1.26
max # of packets on output queue
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOutputEnqueueStyle 1.3.6.1.4.1.2637.2.1.1073.1.27
style of output queue enqueing
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tailDrop(1), rED(2)  

ipCircuitOutputDequeueStyle 1.3.6.1.4.1.2637.2.1.1073.1.28
style of output queue dequeueing
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER single(1), strict(2), fSQ(3)  

ipCircuitRipV1Enabled 1.3.6.1.4.1.2637.2.1.1073.1.30
enable rip v1 on interface?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitRipV2Enabled 1.3.6.1.4.1.2637.2.1.1073.1.31
enable rip v2 on interface? (v1compat = v1 + v2)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitRipSendEnabled 1.3.6.1.4.1.2637.2.1.1073.1.32
send rip out interface?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitRipRecvEnabled 1.3.6.1.4.1.2637.2.1.1073.1.33
accept rip on interface?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitRipPoisonReverseEnabled 1.3.6.1.4.1.2637.2.1.1073.1.34
poison reverse enabled?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitRipInflateMetric 1.3.6.1.4.1.2637.2.1.1073.1.35
inflate RIP metric by this amount
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitRipSendAccessListId 1.3.6.1.4.1.2637.2.1.1073.1.36
access list applied to RIP packets sent
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfEnabled 1.3.6.1.4.1.2637.2.1.1073.1.40
ospf enabled in interface?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitOspfAreaId 1.3.6.1.4.1.2637.2.1.1073.1.41
OSPF area id.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipCircuitOspfCost 1.3.6.1.4.1.2637.2.1.1073.1.42
OSPF cost.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfPriority 1.3.6.1.4.1.2637.2.1.1073.1.43
OSPF priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfHelloInterval 1.3.6.1.4.1.2637.2.1.1073.1.44
OSPF hello interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfDeadInterval 1.3.6.1.4.1.2637.2.1.1073.1.45
OSPF dead interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfRetransmitInterval 1.3.6.1.4.1.2637.2.1.1073.1.46
OSPF retransmit interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfTransmitDelay 1.3.6.1.4.1.2637.2.1.1073.1.47
OSPF transmit delay.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfPollInterval 1.3.6.1.4.1.2637.2.1.1073.1.48
OSPF polling interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipCircuitOspfAuthType 1.3.6.1.4.1.2637.2.1.1073.1.49
OSPF authorization type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), simple(2), md5(3)  

ipCircuitOspfAuthKey 1.3.6.1.4.1.2637.2.1.1073.1.50
simple clear text password
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

ipCircuitMulticastEnabled 1.3.6.1.4.1.2637.2.1.1073.1.60
multicast enabled on interface?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitMulticastProtocol 1.3.6.1.4.1.2637.2.1.1073.1.61
multicast protocol used on this interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), host(1), dvmrp(2)  

ipCircuitInverseArpEnabled 1.3.6.1.4.1.2637.2.1.1073.1.62
Use Inverse ARP if the interface subclass is Frame Relay.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipCircuitGratuitousArpEnabled 1.3.6.1.4.1.2637.2.1.1073.1.63
Send gratuitous arp on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRouteTable 1.3.6.1.4.1.2637.2.1.1074
ip route configuration; one per route entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRouteEntry

ipRouteEntry 1.3.6.1.4.1.2637.2.1.1074.1
This is the structure of entries in the ipRouteTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRouteEntry  

ipRoutePathString 1.3.6.1.4.1.2637.2.1.1074.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRouteRowStatus 1.3.6.1.4.1.2637.2.1.1074.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRouteKeyValue 1.3.6.1.4.1.2637.2.1.1074.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRoutePrefix 1.3.6.1.4.1.2637.2.1.1074.1.11
ip route destination prefix
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipRouteMask 1.3.6.1.4.1.2637.2.1.1074.1.12
ip route destination mask
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipRouteLocalGateway 1.3.6.1.4.1.2637.2.1.1074.1.13
if != 0, ip of local gateway
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipRouteLocalIfIndex 1.3.6.1.4.1.2637.2.1.1074.1.14
or ifIndex if ip_local_gateway == 0
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipRouteDefaultFlag 1.3.6.1.4.1.2637.2.1.1074.1.15
use as default route (ip=0/mask=0) ?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRoutePrivateFlag 1.3.6.1.4.1.2637.2.1.1074.1.16
don't advertise via rip/ospf if true
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRouteRipCost 1.3.6.1.4.1.2637.2.1.1074.1.17
advertised rip metric
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..16  

ipRoutePreference 1.3.6.1.4.1.2637.2.1.1074.1.18
route preference; high means prefer over learned routes
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER low(1), high(2)  

ipRouteStrategy 1.3.6.1.4.1.2637.2.1.1074.1.19
strategy when multiple next-hops exists
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), loadSharing(1), loadSpreading(2)  

ipArpTable 1.3.6.1.4.1.2637.2.1.1075
ip arp configuration; one per arp entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpArpEntry

ipArpEntry 1.3.6.1.4.1.2637.2.1.1075.1
This is the structure of entries in the ipArpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpArpEntry  

ipArpPathString 1.3.6.1.4.1.2637.2.1.1075.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipArpRowStatus 1.3.6.1.4.1.2637.2.1.1075.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipArpKeyValue 1.3.6.1.4.1.2637.2.1.1075.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipArpIfIndex 1.3.6.1.4.1.2637.2.1.1075.1.11
interface to advertise on
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipArpIpDestination 1.3.6.1.4.1.2637.2.1.1075.1.12
ip address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipArpPhysDest 1.3.6.1.4.1.2637.2.1.1075.1.13
mac (hardware) address
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipArpPublishFlag 1.3.6.1.4.1.2637.2.1.1075.1.14
answer arp queries for this entry?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAccessGroupTable 1.3.6.1.4.1.2637.2.1.1078
ip access group configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAccessGroupEntry

ipAccessGroupEntry 1.3.6.1.4.1.2637.2.1.1078.1
This is the structure of entries in the ipAccessGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAccessGroupEntry  

ipAccessGroupPathString 1.3.6.1.4.1.2637.2.1.1078.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAccessGroupRowStatus 1.3.6.1.4.1.2637.2.1.1078.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAccessGroupKeyValue 1.3.6.1.4.1.2637.2.1.1078.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAccessGroupIfIndex 1.3.6.1.4.1.2637.2.1.1078.1.11
interface this access group applies to
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipAccessGroupAccessListId 1.3.6.1.4.1.2637.2.1.1078.1.12
id of access list to apply to interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAccessGroupDirection 1.3.6.1.4.1.2637.2.1.1078.1.13
direction of packets to match against access list
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER in(1), out(2)  

ipOspfNbNeighborTable 1.3.6.1.4.1.2637.2.1.1076
OSPF non-broadcast neighbor entry configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfNbNeighborEntry

ipOspfNbNeighborEntry 1.3.6.1.4.1.2637.2.1.1076.1
This is the structure of entries in the ipOspfNbNeighborTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfNbNeighborEntry  

ipOspfNbNeighborPathString 1.3.6.1.4.1.2637.2.1.1076.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipOspfNbNeighborRowStatus 1.3.6.1.4.1.2637.2.1.1076.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipOspfNbNeighborKeyValue 1.3.6.1.4.1.2637.2.1.1076.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfNbNeighborIfIndex 1.3.6.1.4.1.2637.2.1.1076.1.11
interface neighbor can be reached via
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipOspfNbNeighborIpAddress 1.3.6.1.4.1.2637.2.1.1076.1.12
neighbor's IP address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfNbNeighborDrEligibleEnabled 1.3.6.1.4.1.2637.2.1.1076.1.13
neighbor is eligible to be DR
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipOspfMd5KeyTable 1.3.6.1.4.1.2637.2.1.1044
OSPF MD-5 key configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfMd5KeyEntry

ipOspfMd5KeyEntry 1.3.6.1.4.1.2637.2.1.1044.1
This is the structure of entries in the ipOspfMd5KeyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfMd5KeyEntry  

ipOspfMd5KeyPathString 1.3.6.1.4.1.2637.2.1.1044.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipOspfMd5KeyRowStatus 1.3.6.1.4.1.2637.2.1.1044.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipOspfMd5KeyKeyValue 1.3.6.1.4.1.2637.2.1.1044.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfMd5KeyIfIndex 1.3.6.1.4.1.2637.2.1.1044.1.11
ifIndex of interface key is applied to
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipOspfMd5KeyAreaId 1.3.6.1.4.1.2637.2.1.1044.1.12
area id (unused)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipOspfMd5KeyMd5KeyId 1.3.6.1.4.1.2637.2.1.1044.1.13
MD5 key id [1..n]
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipOspfMd5KeyMd5Key 1.3.6.1.4.1.2637.2.1.1044.1.14
MD5 key in ASCII
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..34)  

ipFrMapTable 1.3.6.1.4.1.2637.2.1.1077
Frame Relay static ip/dlci mapping configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFrMapEntry

ipFrMapEntry 1.3.6.1.4.1.2637.2.1.1077.1
This is the structure of entries in the ipFrMapTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpFrMapEntry  

ipFrMapPathString 1.3.6.1.4.1.2637.2.1.1077.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipFrMapRowStatus 1.3.6.1.4.1.2637.2.1.1077.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipFrMapKeyValue 1.3.6.1.4.1.2637.2.1.1077.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipFrMapIfIndex 1.3.6.1.4.1.2637.2.1.1077.1.11
ifIndex
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipFrMapIpDestination 1.3.6.1.4.1.2637.2.1.1077.1.12
ip address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipFrMapDlci 1.3.6.1.4.1.2637.2.1.1077.1.13
data link connection id
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipFrMapInterfaceFlag 1.3.6.1.4.1.2637.2.1.1077.1.14
use this dlci for interface?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipFrMapBroadcastFlag 1.3.6.1.4.1.2637.2.1.1077.1.15
use this dlci for broadcast?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipFrMapMulticastFlag 1.3.6.1.4.1.2637.2.1.1077.1.16
use this dlci for multicast?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigTable 1.3.6.1.4.1.2637.2.1.1002
ip service global configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpServicesConfigEntry

ipServicesConfigEntry 1.3.6.1.4.1.2637.2.1.1002.1
This is the structure of entries in the ipServicesConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpServicesConfigEntry  

ipServicesConfigPathString 1.3.6.1.4.1.2637.2.1.1002.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipServicesConfigRowStatus 1.3.6.1.4.1.2637.2.1.1002.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipServicesConfigKeyValue 1.3.6.1.4.1.2637.2.1.1002.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipServicesConfigMgmtAddr 1.3.6.1.4.1.2637.2.1.1002.1.11
home ip address of management functions
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipServicesConfigAccessListId 1.3.6.1.4.1.2637.2.1.1002.1.12
id of access list to apply to service input
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipServicesConfigAuthMethod 1.3.6.1.4.1.2637.2.1.1002.1.13
Authentication method for users of IP services
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER remoteOnly(1), localOnly(2), remoteFirst(3), localFirst(4), none(5)  

ipServicesConfigDefaultLevel 1.3.6.1.4.1.2637.2.1.1002.1.14
CLI level for this user (0 for monitor, 1 for admin)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..3  

ipServicesConfigDefaultModifyUserEntries 1.3.6.1.4.1.2637.2.1.1002.1.15
User is able to modify CVX's user entries
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigDefaultModifyConfig 1.3.6.1.4.1.2637.2.1.1002.1.16
User is able to modify CVX's configuration
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigDefaultAllowFTP 1.3.6.1.4.1.2637.2.1.1002.1.17
User will be granted FTP access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigDefaultAllowTelnet 1.3.6.1.4.1.2637.2.1.1002.1.18
User will be granted telnet access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigDefaultLevel0DisconnectUsers 1.3.6.1.4.1.2637.2.1.1002.1.19
Level 0 User is able to disconnect remote user sessions
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigUseIPSvcDefaults 1.3.6.1.4.1.2637.2.1.1002.1.20
Use the defaults configured in this section?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigModifyPasswords 1.3.6.1.4.1.2637.2.1.1002.1.21
User is able to view and modify the CVX's password members
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigDefaultAllowRLogin 1.3.6.1.4.1.2637.2.1.1002.1.22
User will be granted RLogin access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipServicesConfigDefaultAllowRSh 1.3.6.1.4.1.2637.2.1.1002.1.23
User will be granted RSh access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcEntryTable 1.3.6.1.4.1.2637.2.1.1101
configuration for a single ip background service
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSvcEntryEntry

ipSvcEntryEntry 1.3.6.1.4.1.2637.2.1.1101.1
This is the structure of entries in the ipSvcEntryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSvcEntryEntry  

ipSvcEntryPathString 1.3.6.1.4.1.2637.2.1.1101.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSvcEntryRowStatus 1.3.6.1.4.1.2637.2.1.1101.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSvcEntryKeyValue 1.3.6.1.4.1.2637.2.1.1101.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSvcEntryService 1.3.6.1.4.1.2637.2.1.1101.1.11
which server to configure
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dnsClient(1), aaaClient(2), syslogClient(3), bootpClient(4), tftpServer(10), ftpServer(11), telnetServer(12), httpServer(13), snmpServer(14), shellServer(15), trapServer(16), dsmccServer(17), sntpClient(18), sgcpServer(19), rloginServer(20), rshServer(21), ipdcServer(22), ssServer(23)  

ipSvcEntryAdminStatus 1.3.6.1.4.1.2637.2.1.1101.1.12
state of service
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSvcEntryRestricted 1.3.6.1.4.1.2637.2.1.1101.1.13
configure service to respond to requests from admin ethernet only
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryTable 1.3.6.1.4.1.2637.2.1.1111
Local user authentication information. Used to authenticate local services such as TELNET, FTP, etc...
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSvcAuthEntryEntry

ipSvcAuthEntryEntry 1.3.6.1.4.1.2637.2.1.1111.1
This is the structure of entries in the ipSvcAuthEntryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSvcAuthEntryEntry  

ipSvcAuthEntryPathString 1.3.6.1.4.1.2637.2.1.1111.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSvcAuthEntryRowStatus 1.3.6.1.4.1.2637.2.1.1111.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSvcAuthEntryKeyValue 1.3.6.1.4.1.2637.2.1.1111.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSvcAuthEntryUsername 1.3.6.1.4.1.2637.2.1.1111.1.11
the user name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipSvcAuthEntryPassword 1.3.6.1.4.1.2637.2.1.1111.1.12
the password associated with the user name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipSvcAuthEntryLevel 1.3.6.1.4.1.2637.2.1.1111.1.13
CLI level for this user (0 for monitor, 1 for admin)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..3  

ipSvcAuthEntryModifyUserEntries 1.3.6.1.4.1.2637.2.1.1111.1.15
User is able to modify CVX's user entries
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryModifyConfig 1.3.6.1.4.1.2637.2.1.1111.1.16
User is able to modify CVX's configuration
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryAllowFTP 1.3.6.1.4.1.2637.2.1.1111.1.17
User will be granted FTP access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryAllowTelnet 1.3.6.1.4.1.2637.2.1.1111.1.18
User will be granted telnet access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryLevel0DisconnectUsers 1.3.6.1.4.1.2637.2.1.1111.1.19
Level 0 User is able to disconnect remote user sessions
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryModifyPasswords 1.3.6.1.4.1.2637.2.1.1111.1.20
User is able to view and modify the CVX's password members
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryAllowRLogin 1.3.6.1.4.1.2637.2.1.1111.1.21
User will be granted rlogin access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSvcAuthEntryAllowRSh 1.3.6.1.4.1.2637.2.1.1111.1.22
User will be granted rsh access to the CVX
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaGroupConfigTable 1.3.6.1.4.1.2637.2.1.1125
configuration for entire AAA server group
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAaaGroupConfigEntry

ipAaaGroupConfigEntry 1.3.6.1.4.1.2637.2.1.1125.1
This is the structure of entries in the ipAaaGroupConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAaaGroupConfigEntry  

ipAaaGroupConfigPathString 1.3.6.1.4.1.2637.2.1.1125.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaGroupConfigRowStatus 1.3.6.1.4.1.2637.2.1.1125.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAaaGroupConfigKeyValue 1.3.6.1.4.1.2637.2.1.1125.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaGroupConfigName 1.3.6.1.4.1.2637.2.1.1125.1.11
name of server group
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaGroupConfigParallelServers 1.3.6.1.4.1.2637.2.1.1125.1.12
Set the servers in this group to be parallel
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaSetConfigTable 1.3.6.1.4.1.2637.2.1.1126
configuration for entire AAA server group
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAaaSetConfigEntry

ipAaaSetConfigEntry 1.3.6.1.4.1.2637.2.1.1126.1
This is the structure of entries in the ipAaaSetConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAaaSetConfigEntry  

ipAaaSetConfigPathString 1.3.6.1.4.1.2637.2.1.1126.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaSetConfigRowStatus 1.3.6.1.4.1.2637.2.1.1126.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAaaSetConfigKeyValue 1.3.6.1.4.1.2637.2.1.1126.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaSetConfigName 1.3.6.1.4.1.2637.2.1.1126.1.11
name of server set
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaSetConfigMode 1.3.6.1.4.1.2637.2.1.1126.1.12
mode in which server group operates
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER failover(1), monitor(2), roundRobin(3)  

ipAaaSetConfigFakeResponse 1.3.6.1.4.1.2637.2.1.1126.1.13
create a fake response from server
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaServerTable 1.3.6.1.4.1.2637.2.1.1115
configuration for a single AAA server
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAaaServerEntry

ipAaaServerEntry 1.3.6.1.4.1.2637.2.1.1115.1
This is the structure of entries in the ipAaaServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAaaServerEntry  

ipAaaServerPathString 1.3.6.1.4.1.2637.2.1.1115.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaServerRowStatus 1.3.6.1.4.1.2637.2.1.1115.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAaaServerKeyValue 1.3.6.1.4.1.2637.2.1.1115.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaServerIndex 1.3.6.1.4.1.2637.2.1.1115.1.11
index of server within server group
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaServerType 1.3.6.1.4.1.2637.2.1.1115.1.12
AAA server type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER radius(1)  

ipAaaServerIpAddr 1.3.6.1.4.1.2637.2.1.1115.1.13
ip address of server
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAaaServerIpPort 1.3.6.1.4.1.2637.2.1.1115.1.14
ip port of server
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaServerTimeout 1.3.6.1.4.1.2637.2.1.1115.1.15
time to wait before retransmission
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..60  

ipAaaServerRetries 1.3.6.1.4.1.2637.2.1.1115.1.16
maximum retransmissions before failure
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1000  

ipAaaServerKey 1.3.6.1.4.1.2637.2.1.1115.1.17
shared secret key
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

ipAaaServerTrace 1.3.6.1.4.1.2637.2.1.1115.1.18
trace requests to/from server
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaServerMonitorTimeout 1.3.6.1.4.1.2637.2.1.1115.1.21
In monitor mode, the timeout interval for sending test requests to an unreachable host.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..3600  

ipAaaServerMonitorType 1.3.6.1.4.1.2637.2.1.1115.1.22
In monitor mode, the type of RADIUS message to send to an unreachable host.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER accessRequest(1), statusServer(2), acctStop(3)  

ipAaaServerMonitorUsername 1.3.6.1.4.1.2637.2.1.1115.1.23
In monitor mode, username to send in test requests to an unreachable host.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipAaaServerMonitorPassword 1.3.6.1.4.1.2637.2.1.1115.1.24
In monitor mode, password to send in test requests to an unreachable host.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaClientPortTable 1.3.6.1.4.1.2637.2.1.1116
group of UDP ports from which to send AAA requests
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAaaClientPortEntry

ipAaaClientPortEntry 1.3.6.1.4.1.2637.2.1.1116.1
This is the structure of entries in the ipAaaClientPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAaaClientPortEntry  

ipAaaClientPortPathString 1.3.6.1.4.1.2637.2.1.1116.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaClientPortRowStatus 1.3.6.1.4.1.2637.2.1.1116.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAaaClientPortKeyValue 1.3.6.1.4.1.2637.2.1.1116.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaClientPortStartingPort 1.3.6.1.4.1.2637.2.1.1116.1.11
UDP port number
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ipAaaClientPortPortCount 1.3.6.1.4.1.2637.2.1.1116.1.12
count of UDP ports
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

ipAaaRadiusConfigTable 1.3.6.1.4.1.2637.2.1.1119
AAA Radius Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAaaRadiusConfigEntry

ipAaaRadiusConfigEntry 1.3.6.1.4.1.2637.2.1.1119.1
This is the structure of entries in the ipAaaRadiusConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAaaRadiusConfigEntry  

ipAaaRadiusConfigPathString 1.3.6.1.4.1.2637.2.1.1119.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaRadiusConfigRowStatus 1.3.6.1.4.1.2637.2.1.1119.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAaaRadiusConfigKeyValue 1.3.6.1.4.1.2637.2.1.1119.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaRadiusConfigNasId 1.3.6.1.4.1.2637.2.1.1119.1.11
optional string sent as NAS-ID
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaRadiusConfigNasPortStyle 1.3.6.1.4.1.2637.2.1.1119.1.12
type of NAS-PORT info sent to server
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER x16Bit(1), x32Bit(2)  

ipAaaRadiusConfigSessionIdStyle 1.3.6.1.4.1.2637.2.1.1119.1.13
Format of the Acct-Session-Id to be sent to the RADIUS server. Binary is an unprintable binary encoding, while hex and dec are base-16 and base-10 printable strings. If the value of session_id_size is 64_bit, then the printable forms will be sent as two 32-bit values separated by a colon, for example: 04532FF0:0000300F.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER binary(0), hex(1), dec(2)  

ipAaaRadiusConfigSessionIdSize 1.3.6.1.4.1.2637.2.1.1119.1.14
Size of the Acct-Session-Id to be sent to the RADIUS server. The 32-bit version contains a session serial number that is incremented by one for each session number, and is reset to zero upon system reboot. The 64-bit version contains the same session serial number, but is prefixed with a 32-bit BootEra that is different each time this system is rebooted. The combined 64-bit value will be unique for all time for this system.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER x32Bit(1), x64Bit(2)  

ipAaaRadiusConfigVendorSpecId 1.3.6.1.4.1.2637.2.1.1119.1.15
This item allows the enabling or disabling of the vendor specific attribute that identifies the sending RAS as a CVX in accounting and authentication radius records.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  


ipAaaRadiusConfigAdditionalAuthEnabled 1.3.6.1.4.1.2637.2.1.1119.1.17
Specifies whether the attributes for Ascend-Presession-Time, Ascend-Data-Rate and Ascend-Xmit-Rate should be included in RADIUS Access-Request frames.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaRadiusConfigModemAcctEnabled 1.3.6.1.4.1.2637.2.1.1119.1.18
Specifies whether CVX modem quality attributes should be included in the RADIUS Acct-Start and Acct-Stop requests.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaRadiusConfigTerminateComponentEnabled 1.3.6.1.4.1.2637.2.1.1119.1.19
Specifies whether the attributes for CVX-Terminate-Component should be included in the following RADIUS Accounting-Requests: Stop, Tunnel-Stop, Tunnel-Reject, Tunnel-Link-Stop and Tunnel-Link-Reject.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaRadiusConfigTier1Enable 1.3.6.1.4.1.2637.2.1.1119.1.20
This item allows the enabling or disabling of tier 1 authentication, which entails setting the service type to
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipDnsTable 1.3.6.1.4.1.2637.2.1.1120
DNS client configuration information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpDnsEntry

ipDnsEntry 1.3.6.1.4.1.2637.2.1.1120.1
This is the structure of entries in the ipDnsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpDnsEntry  

ipDnsPathString 1.3.6.1.4.1.2637.2.1.1120.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipDnsRowStatus 1.3.6.1.4.1.2637.2.1.1120.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipDnsKeyValue 1.3.6.1.4.1.2637.2.1.1120.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipDnsDefDomain 1.3.6.1.4.1.2637.2.1.1120.1.11
default domain name (i.e. 'abc.com')
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipDnsTimeout 1.3.6.1.4.1.2637.2.1.1120.1.12
timeout value
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..60  

ipDnsRetry 1.3.6.1.4.1.2637.2.1.1120.1.13
retry count
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipDnsNsTable 1.3.6.1.4.1.2637.2.1.1121
DNS client name server configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpDnsNsEntry

ipDnsNsEntry 1.3.6.1.4.1.2637.2.1.1121.1
This is the structure of entries in the ipDnsNsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpDnsNsEntry  

ipDnsNsPathString 1.3.6.1.4.1.2637.2.1.1121.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipDnsNsRowStatus 1.3.6.1.4.1.2637.2.1.1121.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipDnsNsKeyValue 1.3.6.1.4.1.2637.2.1.1121.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipDnsNsIpAddr 1.3.6.1.4.1.2637.2.1.1121.1.11
ip address of DNS server
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipSyslogTable 1.3.6.1.4.1.2637.2.1.1130
syslog client configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSyslogEntry

ipSyslogEntry 1.3.6.1.4.1.2637.2.1.1130.1
This is the structure of entries in the ipSyslogTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSyslogEntry  

ipSyslogPathString 1.3.6.1.4.1.2637.2.1.1130.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSyslogRowStatus 1.3.6.1.4.1.2637.2.1.1130.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSyslogKeyValue 1.3.6.1.4.1.2637.2.1.1130.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSyslogDebugFlag 1.3.6.1.4.1.2637.2.1.1130.1.11
debug flag
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSyslogIpAddr 1.3.6.1.4.1.2637.2.1.1130.1.12
ip address of syslog server
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipSyslogIpPort 1.3.6.1.4.1.2637.2.1.1130.1.13
udp port of syslog server
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSyslogPriority 1.3.6.1.4.1.2637.2.1.1130.1.14
fixed syslog priority (zero to map)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER map(0), emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8), disabled(9)  

ipSyslogFacility 1.3.6.1.4.1.2637.2.1.1130.1.15
fixed syslog facility code
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)  

ipSyslogFilterLevel 1.3.6.1.4.1.2637.2.1.1130.1.16
only transmit syslog messages of specified level or lower
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8)  

ipSntpTable 1.3.6.1.4.1.2637.2.1.1193
SNTP client configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSntpEntry

ipSntpEntry 1.3.6.1.4.1.2637.2.1.1193.1
This is the structure of entries in the ipSntpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSntpEntry  

ipSntpPathString 1.3.6.1.4.1.2637.2.1.1193.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSntpRowStatus 1.3.6.1.4.1.2637.2.1.1193.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSntpKeyValue 1.3.6.1.4.1.2637.2.1.1193.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSntpUpdateFrequency 1.3.6.1.4.1.2637.2.1.1193.1.11
Frequency to sync with the master clock
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 16..16384  

ipSntpMasterClockAddr 1.3.6.1.4.1.2637.2.1.1193.1.12
Ip address of the master NTP clock server which to sync with. Address 224.0.1.1 is the NTP ip multicast address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipSntpAdjustment 1.3.6.1.4.1.2637.2.1.1193.1.13
Amount of time in minutes to add or subtract from the received NTP server time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..720  

ipSntpAdjSign 1.3.6.1.4.1.2637.2.1.1193.1.14
Determines if adjustment is added or subtracted from the NTP server time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER add(0), subtract(1)  

ipShellTable 1.3.6.1.4.1.2637.2.1.1162
shell configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpShellEntry

ipShellEntry 1.3.6.1.4.1.2637.2.1.1162.1
This is the structure of entries in the ipShellTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpShellEntry  

ipShellPathString 1.3.6.1.4.1.2637.2.1.1162.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipShellRowStatus 1.3.6.1.4.1.2637.2.1.1162.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipShellKeyValue 1.3.6.1.4.1.2637.2.1.1162.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipShellBannerMsg 1.3.6.1.4.1.2637.2.1.1162.1.13
shell banner message.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..80)  

ipShellBasePrompt 1.3.6.1.4.1.2637.2.1.1162.1.14
shell session prompt string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

ipShellLoginPrompt 1.3.6.1.4.1.2637.2.1.1162.1.15
shell login prompt string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

ipShellPasswdPrompt 1.3.6.1.4.1.2637.2.1.1162.1.16
shell password prompt string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

ipShellBadPasswdMsg 1.3.6.1.4.1.2637.2.1.1162.1.17
shell invalid password response string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..80)  

ipSnmpTable 1.3.6.1.4.1.2637.2.1.1180
SNMP server configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSnmpEntry

ipSnmpEntry 1.3.6.1.4.1.2637.2.1.1180.1
This is the structure of entries in the ipSnmpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSnmpEntry  

ipSnmpPathString 1.3.6.1.4.1.2637.2.1.1180.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSnmpRowStatus 1.3.6.1.4.1.2637.2.1.1180.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSnmpKeyValue 1.3.6.1.4.1.2637.2.1.1180.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSnmpDebugFlag 1.3.6.1.4.1.2637.2.1.1180.1.11
turn on debug logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSnmpLogFlag 1.3.6.1.4.1.2637.2.1.1180.1.12
turn on session logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSnmpReadCommunity 1.3.6.1.4.1.2637.2.1.1180.1.13
The authentication string required for SNMP read access via SNMP. Currently only one read community string is supported.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipSnmpWriteEnabled 1.3.6.1.4.1.2637.2.1.1180.1.14
If true, SNMP SET operations are permitted.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipSnmpWriteCommunity 1.3.6.1.4.1.2637.2.1.1180.1.15
The authentication string required for SNMP write access via SNMP. Currently only one write community string is supported.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipSnmpMaxSnmpLoad 1.3.6.1.4.1.2637.2.1.1180.1.16
Maximum number of simultaneous SNMP requests permitted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipTrapCfgTable 1.3.6.1.4.1.2637.2.1.1191
SNMP Trap server configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpTrapCfgEntry

ipTrapCfgEntry 1.3.6.1.4.1.2637.2.1.1191.1
This is the structure of entries in the ipTrapCfgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpTrapCfgEntry  

ipTrapCfgPathString 1.3.6.1.4.1.2637.2.1.1191.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipTrapCfgRowStatus 1.3.6.1.4.1.2637.2.1.1191.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipTrapCfgKeyValue 1.3.6.1.4.1.2637.2.1.1191.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipTrapCfgPriority 1.3.6.1.4.1.2637.2.1.1191.1.11
minimum write event priority to generate traps from
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER fatal(7), emerg(6), alert(5), crit(4), err(3), warning(2), notice(1), info(0)  

ipTrapCfgIpPort 1.3.6.1.4.1.2637.2.1.1191.1.12
udp trap port
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipTrapCfgIpAddr 1.3.6.1.4.1.2637.2.1.1191.1.13
ip address of trap consumer
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipTrapCfgCommunityStr 1.3.6.1.4.1.2637.2.1.1191.1.14
SNMP trap community string
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

ipTrapCfgVerTrapType 1.3.6.1.4.1.2637.2.1.1191.1.15
Send the trap in V1 or V2 format.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER v1(1), v2(2)  

ipTrapCfgAuthTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.16
Enable or disable all authentication failure traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgMacModemsThresholdTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.20
Enable or disable cvx-mac-modems-below-threshold and cvx-mac-modems-above-threshold traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgTotalModemsThresholdTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.21
Enable or disable cvx-total-modems-below-threshold and cvx-total-modems-above-threshold traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgLocalPswdChangeTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.22
Enable or disable cvx-local-pswd-change trap.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgAcctServerTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.23
Enable or disable cvx-acct-server-failure and cvx-acct-server-failover traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgSs7GatewayTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.24
Enable or disable cvx-ss7-gateway-up, cvx-ss7-gateway-down and cvx-ss7-gateway-failover traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgTunnelTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.25
Enable or disable cvx-tunnel-start, cvx-tunnel-stop and cvx-tunnel-reject traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgDs3FailoverTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.26
Enable or disable cvx-ds3-failover trap.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgSccFailoverTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.27
Enable or disable cvx-scc-failover trap.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgEthernetPortTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.28
Enable or disable cvx-ethernet-port-up and ethernet-port-down traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgHssiPortTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.29
Enable or disable cvx-hssi-port-up and cvx-hssi-port-down traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgRemoteAuthTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.30
Enable or disable cvx-preAuth-fail, cvx-auth-fail, cvx-auth-server-failover and cvxAuthServerRevived traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgLocalAuthFailThresholdTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.31
Enable or disable cvx-local-auth-failure-threshold-exceeded trap.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgRemoteAuthPacketDiscardTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.32
Enable or disable cvx-remote-auth-packet-discard trap.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgIsdnTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.33
Enable or disable aptis-isdn-link-up, aptis-isdn-link-down and aptis-isdn-link-reset traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgFilterErrorTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.34
Enable or disable cvx-filter-error traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgDhcpTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.35
Enable or disable DHCP traps cvxPrimaryDhcpServerContactFailed, cvxPrimaryDhcpServerContactRevived and cvxSecondaryDhcpServerContactFailed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgSccTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.36
Enable or disable scc traps cvx-slave-flash-missing, cvxSlaveSccFlashDetected, cvxSlaveSccRemoved, cvxSlaveSccInserted, and cvxFailedSlaveSccRemoved.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgGenericLinkTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.37
Enable or disable generic traps linkDown and linkUp.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipTrapCfgRadiusdTrapStatus 1.3.6.1.4.1.2637.2.1.1191.1.38
Enable or disable cvx-radiusd-session-disc, cvx-radiusd-unknown-client and cvx-radiusd-client-auth-failed traps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipDsmccTable 1.3.6.1.4.1.2637.2.1.1192
Digital Storage Media Command and Control.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpDsmccEntry

ipDsmccEntry 1.3.6.1.4.1.2637.2.1.1192.1
This is the structure of entries in the ipDsmccTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpDsmccEntry  

ipDsmccPathString 1.3.6.1.4.1.2637.2.1.1192.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipDsmccRowStatus 1.3.6.1.4.1.2637.2.1.1192.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipDsmccKeyValue 1.3.6.1.4.1.2637.2.1.1192.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipDsmccDebugFlag 1.3.6.1.4.1.2637.2.1.1192.1.11
turn on debug logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipDsmccLogFlag 1.3.6.1.4.1.2637.2.1.1192.1.12
turn on session logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSgcpTable 1.3.6.1.4.1.2637.2.1.1194
Simple Gateway Control Protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSgcpEntry

ipSgcpEntry 1.3.6.1.4.1.2637.2.1.1194.1
This is the structure of entries in the ipSgcpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSgcpEntry  

ipSgcpPathString 1.3.6.1.4.1.2637.2.1.1194.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSgcpRowStatus 1.3.6.1.4.1.2637.2.1.1194.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSgcpKeyValue 1.3.6.1.4.1.2637.2.1.1194.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSgcpDebugFlag 1.3.6.1.4.1.2637.2.1.1194.1.11
turn on debug logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSgcpLogFlag 1.3.6.1.4.1.2637.2.1.1194.1.12
turn on session logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipIpdcTable 1.3.6.1.4.1.2637.2.1.1197
IPDC table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpIpdcEntry

ipIpdcEntry 1.3.6.1.4.1.2637.2.1.1197.1
This is the structure of entries in the ipIpdcTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpIpdcEntry  

ipIpdcPathString 1.3.6.1.4.1.2637.2.1.1197.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipIpdcRowStatus 1.3.6.1.4.1.2637.2.1.1197.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipIpdcKeyValue 1.3.6.1.4.1.2637.2.1.1197.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipIpdcDebugFlag 1.3.6.1.4.1.2637.2.1.1197.1.11
turn on debug logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipIpdcLogFlag 1.3.6.1.4.1.2637.2.1.1197.1.12
turn on session logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSsTable 1.3.6.1.4.1.2637.2.1.1198
IPSS table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSsEntry

ipSsEntry 1.3.6.1.4.1.2637.2.1.1198.1
This is the structure of entries in the ipSsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSsEntry  

ipSsPathString 1.3.6.1.4.1.2637.2.1.1198.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSsRowStatus 1.3.6.1.4.1.2637.2.1.1198.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSsKeyValue 1.3.6.1.4.1.2637.2.1.1198.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSsDebugFlag 1.3.6.1.4.1.2637.2.1.1198.1.11
turn on debug logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSsLogFlag 1.3.6.1.4.1.2637.2.1.1198.1.12
turn on session logging if non-zero
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRshellConfigTable 1.3.6.1.4.1.2637.2.1.1176
rshell configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRshellConfigEntry

ipRshellConfigEntry 1.3.6.1.4.1.2637.2.1.1176.1
This is the structure of entries in the ipRshellConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRshellConfigEntry  

ipRshellConfigPathString 1.3.6.1.4.1.2637.2.1.1176.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRshellConfigRowStatus 1.3.6.1.4.1.2637.2.1.1176.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRshellConfigKeyValue 1.3.6.1.4.1.2637.2.1.1176.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRshellConfigForceAddressValidation 1.3.6.1.4.1.2637.2.1.1176.1.11
force RSH Address validation
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRhostEntryTable 1.3.6.1.4.1.2637.2.1.1177
rhost entries used to authenticate rshell users
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRhostEntryEntry

ipRhostEntryEntry 1.3.6.1.4.1.2637.2.1.1177.1
This is the structure of entries in the ipRhostEntryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRhostEntryEntry  

ipRhostEntryPathString 1.3.6.1.4.1.2637.2.1.1177.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRhostEntryRowStatus 1.3.6.1.4.1.2637.2.1.1177.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRhostEntryKeyValue 1.3.6.1.4.1.2637.2.1.1177.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRhostEntryLocalUser 1.3.6.1.4.1.2637.2.1.1177.1.11
local username
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

ipRhostEntryRemoteUser 1.3.6.1.4.1.2637.2.1.1177.1.12
remote username
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

ipRhostEntryRemoteHost 1.3.6.1.4.1.2637.2.1.1177.1.13
remote host name
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

ipRhostEntryAllowRsh 1.3.6.1.4.1.2637.2.1.1177.1.14
allow rsh access for this entry
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRhostEntryAllowRlogin 1.3.6.1.4.1.2637.2.1.1177.1.15
allow rlogin access for this entry
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipRloginTable 1.3.6.1.4.1.2637.2.1.1178
rlogin server configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRloginEntry

ipRloginEntry 1.3.6.1.4.1.2637.2.1.1178.1
This is the structure of entries in the ipRloginTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRloginEntry  

ipRloginPathString 1.3.6.1.4.1.2637.2.1.1178.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRloginRowStatus 1.3.6.1.4.1.2637.2.1.1178.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRloginKeyValue 1.3.6.1.4.1.2637.2.1.1178.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRloginTcpPort 1.3.6.1.4.1.2637.2.1.1178.1.11
TCP port number for the rlogin server
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 512..1023  

ipRshTable 1.3.6.1.4.1.2637.2.1.1179
rsh server configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRshEntry

ipRshEntry 1.3.6.1.4.1.2637.2.1.1179.1
This is the structure of entries in the ipRshTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRshEntry  

ipRshPathString 1.3.6.1.4.1.2637.2.1.1179.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipRshRowStatus 1.3.6.1.4.1.2637.2.1.1179.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipRshKeyValue 1.3.6.1.4.1.2637.2.1.1179.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipRshTcpPort 1.3.6.1.4.1.2637.2.1.1179.1.11
TCP port number for the rsh server
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 512..1023  

ipAaaRadiusdConfigTable 1.3.6.1.4.1.2637.2.1.1128
configuration for the radius daemon
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAaaRadiusdConfigEntry

ipAaaRadiusdConfigEntry 1.3.6.1.4.1.2637.2.1.1128.1
This is the structure of entries in the ipAaaRadiusdConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAaaRadiusdConfigEntry  

ipAaaRadiusdConfigPathString 1.3.6.1.4.1.2637.2.1.1128.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaRadiusdConfigRowStatus 1.3.6.1.4.1.2637.2.1.1128.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAaaRadiusdConfigKeyValue 1.3.6.1.4.1.2637.2.1.1128.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaRadiusdConfigStatus 1.3.6.1.4.1.2637.2.1.1128.1.11
This item allows enabling or disabling of the radius daemon. When enabled, the radius daemon will support Ascend-Disconnect-Request RADIUS messages are sent by remote hosts to terminate dialup sessions on the switch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipAaaRadiusdConfigPort 1.3.6.1.4.1.2637.2.1.1128.1.12
Set UDP port the radius daemon receives requests on
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ipAaaRadiusClientTable 1.3.6.1.4.1.2637.2.1.1129
configuration for a radius client
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAaaRadiusClientEntry

ipAaaRadiusClientEntry 1.3.6.1.4.1.2637.2.1.1129.1
This is the structure of entries in the ipAaaRadiusClientTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAaaRadiusClientEntry  

ipAaaRadiusClientPathString 1.3.6.1.4.1.2637.2.1.1129.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAaaRadiusClientRowStatus 1.3.6.1.4.1.2637.2.1.1129.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAaaRadiusClientKeyValue 1.3.6.1.4.1.2637.2.1.1129.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAaaRadiusClientIndex 1.3.6.1.4.1.2637.2.1.1129.1.11
client index
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1024  

ipAaaRadiusClientIpAddr 1.3.6.1.4.1.2637.2.1.1129.1.12
client ip address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAaaRadiusClientVpopId 1.3.6.1.4.1.2637.2.1.1129.1.13
vpop id accessible to this client
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10240  

ipAaaRadiusClientSecret 1.3.6.1.4.1.2637.2.1.1129.1.14
shared secret key
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

ipAaaRadiusClientStatus 1.3.6.1.4.1.2637.2.1.1129.1.15
This item allows enabling or disabling of the radius client. When enabled, the radius client will be allowed to send Ascend-Disconnect-Request RADIUS messages in order to terminate dialup sessions on the switch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipAaaRadiusClientTrace 1.3.6.1.4.1.2637.2.1.1129.1.16
trace requests to/from this client
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAaaRadiusClientRequiredAttribute 1.3.6.1.4.1.2637.2.1.1129.1.17
all: neeed to match all of username, framed_ip, session_id.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sessionId(1), all(2)  

inboundPolicyTable 1.3.6.1.4.1.2637.2.1.1603
IPSec System Security Policy Configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InboundPolicyEntry

inboundPolicyEntry 1.3.6.1.4.1.2637.2.1.1603.1
This is the structure of entries in the inboundPolicyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  InboundPolicyEntry  

inboundPolicyPathString 1.3.6.1.4.1.2637.2.1.1603.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

inboundPolicyRowStatus 1.3.6.1.4.1.2637.2.1.1603.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

inboundPolicyKeyValue 1.3.6.1.4.1.2637.2.1.1603.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundPolicyCommit 1.3.6.1.4.1.2637.2.1.1603.1.11
Must set to 1
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundPolicyPolicy 1.3.6.1.4.1.2637.2.1.1603.1.12
Which System Security Policy to Configure
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER protected(1), notProtected(2), ipsecDisabled(3)  

outboundPolicyTable 1.3.6.1.4.1.2637.2.1.1604
IPSec System Security Policy Configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutboundPolicyEntry

outboundPolicyEntry 1.3.6.1.4.1.2637.2.1.1604.1
This is the structure of entries in the outboundPolicyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  OutboundPolicyEntry  

outboundPolicyPathString 1.3.6.1.4.1.2637.2.1.1604.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

outboundPolicyRowStatus 1.3.6.1.4.1.2637.2.1.1604.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

outboundPolicyKeyValue 1.3.6.1.4.1.2637.2.1.1604.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundPolicyCommit 1.3.6.1.4.1.2637.2.1.1604.1.11
Must set to 1
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundPolicyPolicy 1.3.6.1.4.1.2637.2.1.1604.1.12
Which System Security Policy to Configure
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER protected(1), notProtected(2), ipsecDisabled(3)  

inboundSpdbTable 1.3.6.1.4.1.2637.2.1.1606
IPSec Inbound SPDB
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InboundSpdbEntry

inboundSpdbEntry 1.3.6.1.4.1.2637.2.1.1606.1
This is the structure of entries in the inboundSpdbTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  InboundSpdbEntry  

inboundSpdbPathString 1.3.6.1.4.1.2637.2.1.1606.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

inboundSpdbRowStatus 1.3.6.1.4.1.2637.2.1.1606.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

inboundSpdbKeyValue 1.3.6.1.4.1.2637.2.1.1606.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSpdbCommit 1.3.6.1.4.1.2637.2.1.1606.1.11
Must set to 1 to add to the spdb
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSpdbSelector 1.3.6.1.4.1.2637.2.1.1606.1.12
Peer IP address as Selector
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

inboundSpdbPolicy 1.3.6.1.4.1.2637.2.1.1606.1.13
Peer Selector Security Policy
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER applyIPSec(1), bypassIPSec(2), discard(3)  

inboundSpdbIpsecGwAddr 1.3.6.1.4.1.2637.2.1.1606.1.14
Peer IP Address for security association
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

inboundSpdbSpi 1.3.6.1.4.1.2637.2.1.1606.1.15
Peer SPI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSpdbIpsecProtocol 1.3.6.1.4.1.2637.2.1.1606.1.16
IP Security Protocol (ESP)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ah(1), esp(2)  

outboundSpdbTable 1.3.6.1.4.1.2637.2.1.1607
IPSec Outbound SPDB
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutboundSpdbEntry

outboundSpdbEntry 1.3.6.1.4.1.2637.2.1.1607.1
This is the structure of entries in the outboundSpdbTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  OutboundSpdbEntry  

outboundSpdbPathString 1.3.6.1.4.1.2637.2.1.1607.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

outboundSpdbRowStatus 1.3.6.1.4.1.2637.2.1.1607.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

outboundSpdbKeyValue 1.3.6.1.4.1.2637.2.1.1607.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSpdbCommit 1.3.6.1.4.1.2637.2.1.1607.1.11
Must set to 1 to add to the sadb
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSpdbSelector 1.3.6.1.4.1.2637.2.1.1607.1.12
Destination IP address as Selector
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

outboundSpdbPolicy 1.3.6.1.4.1.2637.2.1.1607.1.13
Per Selector Security Policy
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER applyIPSec(1), bypassIPSec(2), discard(3)  

outboundSpdbIpsecGwAddr 1.3.6.1.4.1.2637.2.1.1607.1.14
Peer IP Address for security association
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

outboundSpdbSpi 1.3.6.1.4.1.2637.2.1.1607.1.15
Destination SPI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSpdbIpsecProtocol 1.3.6.1.4.1.2637.2.1.1607.1.16
IP Security Protocol (ESP)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ah(1), esp(2)  

inboundSadbTable 1.3.6.1.4.1.2637.2.1.1609
IPSec INBOUND Security Association DB Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InboundSadbEntry

inboundSadbEntry 1.3.6.1.4.1.2637.2.1.1609.1
This is the structure of entries in the inboundSadbTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  InboundSadbEntry  

inboundSadbPathString 1.3.6.1.4.1.2637.2.1.1609.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

inboundSadbRowStatus 1.3.6.1.4.1.2637.2.1.1609.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

inboundSadbKeyValue 1.3.6.1.4.1.2637.2.1.1609.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbCommit 1.3.6.1.4.1.2637.2.1.1609.1.11
Must set to 1 to add to the sadb
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbIpAddr 1.3.6.1.4.1.2637.2.1.1609.1.12
Peer IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

inboundSadbSpi 1.3.6.1.4.1.2637.2.1.1609.1.13
Peer SPI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbIpsecProtocol 1.3.6.1.4.1.2637.2.1.1609.1.14
IP Security Protocol (ESP)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ah(1), esp(2)  

inboundSadbAhMacAlg 1.3.6.1.4.1.2637.2.1.1609.1.15
AH Authentication Algorithm (HMAC MD5/HMAC SHA-1)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hmacmd5(1), hmacsha1(2)  

inboundSadbAhMacLength 1.3.6.1.4.1.2637.2.1.1609.1.16
AH Message Authentication Code (MAC) Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbAhMacKeyLength 1.3.6.1.4.1.2637.2.1.1609.1.17
AH MAC Key Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbAhMacKey 1.3.6.1.4.1.2637.2.1.1609.1.18
Peer AH Data Authentication Key (Hex)
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

inboundSadbEspMacAlg 1.3.6.1.4.1.2637.2.1.1609.1.19
ESP Authentication Algorithm (HMAC MD5/HMAC SHA-1/No Authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hmacmd5(1), hmacsha1(2), espNoAuth(3)  

inboundSadbEspMacLength 1.3.6.1.4.1.2637.2.1.1609.1.20
ESP Message Authentication Code (MAC) Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbEspMacKeyLength 1.3.6.1.4.1.2637.2.1.1609.1.21
ESP MAC Key Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbEspMacKey 1.3.6.1.4.1.2637.2.1.1609.1.22
Peer ESP Data Authentication Key (Hex)
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

inboundSadbEspEncAlg 1.3.6.1.4.1.2637.2.1.1609.1.23
ESP Encryption Algorithm (DES CBC/Triple DES CBC/Null Cipher)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER espDesCbc(1), esp3desCbc(2), nullCipher(3)  

inboundSadbEspEncKeyLength 1.3.6.1.4.1.2637.2.1.1609.1.24
ESP Encryption Key Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbEspEncKey 1.3.6.1.4.1.2637.2.1.1609.1.25
Peer ESP Data Encryption Key (Hex)
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

inboundSadbIpsecMode 1.3.6.1.4.1.2637.2.1.1609.1.26
IP Security Mode (Tunnel/Transport)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tunnel(1), transport(2)  

inboundSadbNextEncapIpAddr 1.3.6.1.4.1.2637.2.1.1609.1.27
Next IP Security Encapsulation Peer IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

inboundSadbNextEncapSpi 1.3.6.1.4.1.2637.2.1.1609.1.28
Next IP Security Encapsulation Peer SPI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

inboundSadbNextEncapIpsecProtocol 1.3.6.1.4.1.2637.2.1.1609.1.29
Next IP Security Encapsulation Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ah(1), esp(2)  

outboundSadbTable 1.3.6.1.4.1.2637.2.1.1610
IPSec OUTBOUND Security Association DB Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OutboundSadbEntry

outboundSadbEntry 1.3.6.1.4.1.2637.2.1.1610.1
This is the structure of entries in the outboundSadbTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  OutboundSadbEntry  

outboundSadbPathString 1.3.6.1.4.1.2637.2.1.1610.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

outboundSadbRowStatus 1.3.6.1.4.1.2637.2.1.1610.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

outboundSadbKeyValue 1.3.6.1.4.1.2637.2.1.1610.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbCommit 1.3.6.1.4.1.2637.2.1.1610.1.11
Must set to 1 to add to the sadb
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbIpAddr 1.3.6.1.4.1.2637.2.1.1610.1.12
Destination IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

outboundSadbSpi 1.3.6.1.4.1.2637.2.1.1610.1.13
Destination SPI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbIpsecProtocol 1.3.6.1.4.1.2637.2.1.1610.1.14
IP Security Protocol (ESP)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ah(1), esp(2)  

outboundSadbAhMacAlg 1.3.6.1.4.1.2637.2.1.1610.1.15
AH Authentication Algorithm (HAMC MD5/HMAC SHA-1)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hmacmd5(1), hmacsha1(2)  

outboundSadbAhMacLength 1.3.6.1.4.1.2637.2.1.1610.1.16
AH Message Authentication Code (MAC) Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbAhMacKeyLength 1.3.6.1.4.1.2637.2.1.1610.1.17
AH MAC Key Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbAhMacKey 1.3.6.1.4.1.2637.2.1.1610.1.18
Destination AH Data Authentication Key (Hex)
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

outboundSadbEspMacAlg 1.3.6.1.4.1.2637.2.1.1610.1.19
ESP Authentication Algorithm (HMAC MD5/HMAC SHA-1/No Authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hmacmd5(1), hmacsha1(2), espNoAuth(3)  

outboundSadbEspMacLength 1.3.6.1.4.1.2637.2.1.1610.1.20
ESP Message Authentication Code (MAC) Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbEspMacKeyLength 1.3.6.1.4.1.2637.2.1.1610.1.21
ESP MAC Key Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbEspMacKey 1.3.6.1.4.1.2637.2.1.1610.1.22
Destination ESP Data Authentication Key (Hex)
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

outboundSadbEspEncAlg 1.3.6.1.4.1.2637.2.1.1610.1.23
ESP Encryption Algorithm (DES CBC/Triple DES CBC/Null Cipher)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER espDesCbc(1), esp3desCbc(2), nullCipher(3)  

outboundSadbEspEncKeyLength 1.3.6.1.4.1.2637.2.1.1610.1.24
ESP Encryption Key Length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbEspEncKey 1.3.6.1.4.1.2637.2.1.1610.1.25
Destination ESP Data Encryption Key (Hex)
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

outboundSadbIpsecMode 1.3.6.1.4.1.2637.2.1.1610.1.26
IP Security Mode (Tunnel/Transport)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tunnel(1), transport(2)  

outboundSadbNextEncapIpAddr 1.3.6.1.4.1.2637.2.1.1610.1.27
Next IP Security Encapsulation Peer IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

outboundSadbNextEncapSpi 1.3.6.1.4.1.2637.2.1.1610.1.28
Next IP Security Encapsulation Peer SPI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

outboundSadbNextEncapIpsecProtocol 1.3.6.1.4.1.2637.2.1.1610.1.29
Next IP Security Encapsulation Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ah(1), esp(2)  

statsDummyTable 1.3.6.1.4.1.2637.2.1.1613
All containers must have at least one non-monitoring class. This is why stats_dummy object is present.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StatsDummyEntry

statsDummyEntry 1.3.6.1.4.1.2637.2.1.1613.1
This is the structure of entries in the statsDummyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  StatsDummyEntry  

statsDummyPathString 1.3.6.1.4.1.2637.2.1.1613.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

statsDummyRowStatus 1.3.6.1.4.1.2637.2.1.1613.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

statsDummyKeyValue 1.3.6.1.4.1.2637.2.1.1613.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

statsDummyCommit 1.3.6.1.4.1.2637.2.1.1613.1.11
Dummy Element
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

vmsConfigTable 1.3.6.1.4.1.2637.2.1.1614
IPSec VMS120 Chip Configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VmsConfigEntry

vmsConfigEntry 1.3.6.1.4.1.2637.2.1.1614.1
This is the structure of entries in the vmsConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VmsConfigEntry  

vmsConfigPathString 1.3.6.1.4.1.2637.2.1.1614.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

vmsConfigRowStatus 1.3.6.1.4.1.2637.2.1.1614.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vmsConfigKeyValue 1.3.6.1.4.1.2637.2.1.1614.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

vmsConfigCommit 1.3.6.1.4.1.2637.2.1.1614.1.11
Must set to 1
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

vmsConfigChipStateMask 1.3.6.1.4.1.2637.2.1.1614.1.12
Mask for VMS120's Capabilites
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(2), noEnc(3), no3des(4), fullCapabilities(5)  

ipDsbyteTable 1.3.6.1.4.1.2637.2.1.1224
IP DS Byte Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpDsbyteEntry

ipDsbyteEntry 1.3.6.1.4.1.2637.2.1.1224.1
This is the structure of entries in the ipDsbyteTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpDsbyteEntry  

ipDsbytePathString 1.3.6.1.4.1.2637.2.1.1224.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipDsbyteRowStatus 1.3.6.1.4.1.2637.2.1.1224.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipDsbyteKeyValue 1.3.6.1.4.1.2637.2.1.1224.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipDsbyteDSByteEnabled 1.3.6.1.4.1.2637.2.1.1224.1.11
the flag to indicate whether ds byte setting is enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipDsbyteDSByteValue 1.3.6.1.4.1.2637.2.1.1224.1.12
the ds byte value
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ipPoolConfigTable 1.3.6.1.4.1.2637.2.1.1242
Address Block Instances that each define an IP Address range.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpPoolConfigEntry

ipPoolConfigEntry 1.3.6.1.4.1.2637.2.1.1242.1
This is the structure of entries in the ipPoolConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpPoolConfigEntry  

ipPoolConfigPathString 1.3.6.1.4.1.2637.2.1.1242.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipPoolConfigRowStatus 1.3.6.1.4.1.2637.2.1.1242.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipPoolConfigKeyValue 1.3.6.1.4.1.2637.2.1.1242.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipPoolConfigPrivate 1.3.6.1.4.1.2637.2.1.1242.1.11
If TRUE, pool is not eligible for pool 0 global search.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAddressBlockTable 1.3.6.1.4.1.2637.2.1.1241
This class defines a block of addresses that are contributed to an IP Address pool for dynamic allocation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAddressBlockEntry

ipAddressBlockEntry 1.3.6.1.4.1.2637.2.1.1241.1
This is the structure of entries in the ipAddressBlockTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddressBlockEntry  

ipAddressBlockPathString 1.3.6.1.4.1.2637.2.1.1241.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipAddressBlockRowStatus 1.3.6.1.4.1.2637.2.1.1241.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAddressBlockKeyValue 1.3.6.1.4.1.2637.2.1.1241.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAddressBlockStart 1.3.6.1.4.1.2637.2.1.1241.1.11
The first IP Address of this IP pool.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAddressBlockCount 1.3.6.1.4.1.2637.2.1.1241.1.12
The number of addresses in this address block.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipAddressBlockMask 1.3.6.1.4.1.2637.2.1.1241.1.13
The IP Address mask that describes this address block if and only if this address block is CIDR-compliant.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAddressBlockRangeInUse 1.3.6.1.4.1.2637.2.1.1241.1.14
This is set internally by the software when an IP Address from this range is in use. This attribute should not be set.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipAddressBlockAdminStatus 1.3.6.1.4.1.2637.2.1.1241.1.15
Set to enabled (1) to allow IP Addresses to be allocated from this range, set to disabled(2) to dry it out.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

iSDNConfigTable 1.3.6.1.4.1.2637.2.1.2201
ISDN Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNConfigEntry

iSDNConfigEntry 1.3.6.1.4.1.2637.2.1.2201.1
This is the structure of entries in the iSDNConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNConfigEntry  

iSDNConfigPathString 1.3.6.1.4.1.2637.2.1.2201.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNConfigRowStatus 1.3.6.1.4.1.2637.2.1.2201.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNConfigKeyValue 1.3.6.1.4.1.2637.2.1.2201.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNConfigDirection 1.3.6.1.4.1.2637.2.1.2201.1.11
network or user
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER userSide(1), networkSide(2)  

iSDNConfigSwitchType 1.3.6.1.4.1.2637.2.1.2201.1.12
AT&T, DMS, NET5, ...
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER att4ess(1), att5ess(2), ntiDms(3), ni2(4), etsi(5), ntt(6), cr33(7), me0200(8), external(9)  

iSDNConfigNFAS 1.3.6.1.4.1.2637.2.1.2201.1.13
Non-Facility Associated Signaling
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), master(1), slave(2), backup(3)  

iSDNConfigNFASInterface 1.3.6.1.4.1.2637.2.1.2201.1.14
the interface that will signal for this iface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..56  

iSDNConfigNFASID 1.3.6.1.4.1.2637.2.1.2201.1.15
ID to use for this interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..55  

iSDNConfigSendService 1.3.6.1.4.1.2637.2.1.2201.1.16
choose SERVICE message criteria for b-channel maintenance
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER default(0), enable(1), disable(2)  

iSDNConfigForceService 1.3.6.1.4.1.2637.2.1.2201.1.17
Select SERVICE message override
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(0), zealous(1)  

iSDNConfigIIDEncoding 1.3.6.1.4.1.2637.2.1.2201.1.18
how to encode the interface ID for this interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER default(1), explicit(2)  

iSDNLayer2TimersTable 1.3.6.1.4.1.2637.2.1.2202
ISDN Layer-2 Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer2TimersEntry

iSDNLayer2TimersEntry 1.3.6.1.4.1.2637.2.1.2202.1
This is the structure of entries in the iSDNLayer2TimersTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer2TimersEntry  

iSDNLayer2TimersPathString 1.3.6.1.4.1.2637.2.1.2202.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer2TimersRowStatus 1.3.6.1.4.1.2637.2.1.2202.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer2TimersKeyValue 1.3.6.1.4.1.2637.2.1.2202.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersT200 1.3.6.1.4.1.2637.2.1.2202.1.11
retry timer. 1 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersT203 1.3.6.1.4.1.2637.2.1.2202.1.12
keep-alive timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersT204 1.3.6.1.4.1.2637.2.1.2202.1.13
XID retrans timer. 2 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersN201 1.3.6.1.4.1.2637.2.1.2202.1.14
max I-frame. 260 octets
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersN204 1.3.6.1.4.1.2637.2.1.2202.1.15
max XID retrans count. 3 tries
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersK 1.3.6.1.4.1.2637.2.1.2202.1.16
max window size. 7 frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersAtt5essTable 1.3.6.1.4.1.2637.2.1.2211
ISDN Layer-2 ATT/5ESS Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer2TimersAtt5essEntry

iSDNLayer2TimersAtt5essEntry 1.3.6.1.4.1.2637.2.1.2211.1
This is the structure of entries in the iSDNLayer2TimersAtt5essTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer2TimersAtt5essEntry  

iSDNLayer2TimersAtt5essPathString 1.3.6.1.4.1.2637.2.1.2211.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer2TimersAtt5essRowStatus 1.3.6.1.4.1.2637.2.1.2211.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer2TimersAtt5essKeyValue 1.3.6.1.4.1.2637.2.1.2211.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersAtt5essT200 1.3.6.1.4.1.2637.2.1.2211.1.11
retry timer. 1 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersAtt5essT203 1.3.6.1.4.1.2637.2.1.2211.1.12
keep-alive timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersAtt5essT204 1.3.6.1.4.1.2637.2.1.2211.1.13
XID retrans timer. 2 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersAtt5essN201 1.3.6.1.4.1.2637.2.1.2211.1.14
max I-frame. 260 octets
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersAtt5essN204 1.3.6.1.4.1.2637.2.1.2211.1.15
max XID retrans count. 3 tries
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer2TimersAtt5essK 1.3.6.1.4.1.2637.2.1.2211.1.16
max window size. 7 frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersTable 1.3.6.1.4.1.2637.2.1.2203
ISDN Layer-3 Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer3TimersEntry

iSDNLayer3TimersEntry 1.3.6.1.4.1.2637.2.1.2203.1
This is the structure of entries in the iSDNLayer3TimersTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer3TimersEntry  

iSDNLayer3TimersPathString 1.3.6.1.4.1.2637.2.1.2203.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer3TimersRowStatus 1.3.6.1.4.1.2637.2.1.2203.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer3TimersKeyValue 1.3.6.1.4.1.2637.2.1.2203.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT302 1.3.6.1.4.1.2637.2.1.2203.1.11
overlap receiving timer. 15 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT303 1.3.6.1.4.1.2637.2.1.2203.1.12
call initiated timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT304 1.3.6.1.4.1.2637.2.1.2203.1.13
overlap sending timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT305 1.3.6.1.4.1.2637.2.1.2203.1.14
disconnect req timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT306 1.3.6.1.4.1.2637.2.1.2203.1.15
suspend req. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT308 1.3.6.1.4.1.2637.2.1.2203.1.16
release req. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT309 1.3.6.1.4.1.2637.2.1.2203.1.17
clear active calls timer. 90 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT310 1.3.6.1.4.1.2637.2.1.2203.1.18
connect timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT312 1.3.6.1.4.1.2637.2.1.2203.1.19
setup timer. 6 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT313 1.3.6.1.4.1.2637.2.1.2203.1.20
message frag timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT316 1.3.6.1.4.1.2637.2.1.2203.1.21
restart timer. 120 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT318 1.3.6.1.4.1.2637.2.1.2203.1.22
resume timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT319 1.3.6.1.4.1.2637.2.1.2203.1.23
suspend timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT321 1.3.6.1.4.1.2637.2.1.2203.1.24
service ack timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT322 1.3.6.1.4.1.2637.2.1.2203.1.25
status enq timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersT3m1 1.3.6.1.4.1.2637.2.1.2203.1.26
d-channel backup timer. 40 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essTable 1.3.6.1.4.1.2637.2.1.2220
ISDN Layer-3 ATT/4ESS Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer3TimersAtt4essEntry

iSDNLayer3TimersAtt4essEntry 1.3.6.1.4.1.2637.2.1.2220.1
This is the structure of entries in the iSDNLayer3TimersAtt4essTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer3TimersAtt4essEntry  

iSDNLayer3TimersAtt4essPathString 1.3.6.1.4.1.2637.2.1.2220.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer3TimersAtt4essRowStatus 1.3.6.1.4.1.2637.2.1.2220.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer3TimersAtt4essKeyValue 1.3.6.1.4.1.2637.2.1.2220.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT302 1.3.6.1.4.1.2637.2.1.2220.1.11
overlap receiving timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT303 1.3.6.1.4.1.2637.2.1.2220.1.12
call initiated timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT304 1.3.6.1.4.1.2637.2.1.2220.1.13
overlap sending timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT305 1.3.6.1.4.1.2637.2.1.2220.1.14
disconnect req timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT306 1.3.6.1.4.1.2637.2.1.2220.1.15
suspend req. 15 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT308 1.3.6.1.4.1.2637.2.1.2220.1.16
release req. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT309 1.3.6.1.4.1.2637.2.1.2220.1.17
clear active calls timer. 90 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT310 1.3.6.1.4.1.2637.2.1.2220.1.18
connect timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT312 1.3.6.1.4.1.2637.2.1.2220.1.19
setup timer. 4.5 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT313 1.3.6.1.4.1.2637.2.1.2220.1.20
message frag timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT316 1.3.6.1.4.1.2637.2.1.2220.1.21
restart timer. 120 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT318 1.3.6.1.4.1.2637.2.1.2220.1.22
resume timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT319 1.3.6.1.4.1.2637.2.1.2220.1.23
suspend timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT321 1.3.6.1.4.1.2637.2.1.2220.1.24
service ack timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT322 1.3.6.1.4.1.2637.2.1.2220.1.25
status enq timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt4essT3m1 1.3.6.1.4.1.2637.2.1.2220.1.26
d-channel backup timer. 40 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essTable 1.3.6.1.4.1.2637.2.1.2221
ISDN Layer-3 ATT/5ESS Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer3TimersAtt5essEntry

iSDNLayer3TimersAtt5essEntry 1.3.6.1.4.1.2637.2.1.2221.1
This is the structure of entries in the iSDNLayer3TimersAtt5essTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer3TimersAtt5essEntry  

iSDNLayer3TimersAtt5essPathString 1.3.6.1.4.1.2637.2.1.2221.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer3TimersAtt5essRowStatus 1.3.6.1.4.1.2637.2.1.2221.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer3TimersAtt5essKeyValue 1.3.6.1.4.1.2637.2.1.2221.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT302 1.3.6.1.4.1.2637.2.1.2221.1.11
overlap receiving timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT303 1.3.6.1.4.1.2637.2.1.2221.1.12
call initiated timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT304 1.3.6.1.4.1.2637.2.1.2221.1.13
overlap sending timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT305 1.3.6.1.4.1.2637.2.1.2221.1.14
disconnect req timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT306 1.3.6.1.4.1.2637.2.1.2221.1.15
suspend req. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT308 1.3.6.1.4.1.2637.2.1.2221.1.16
release req. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT309 1.3.6.1.4.1.2637.2.1.2221.1.17
clear active calls timer. 90 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT310 1.3.6.1.4.1.2637.2.1.2221.1.18
connect timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT312 1.3.6.1.4.1.2637.2.1.2221.1.19
setup timer. 6 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT313 1.3.6.1.4.1.2637.2.1.2221.1.20
message frag timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT316 1.3.6.1.4.1.2637.2.1.2221.1.21
restart timer. 120 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT318 1.3.6.1.4.1.2637.2.1.2221.1.22
resume timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT319 1.3.6.1.4.1.2637.2.1.2221.1.23
suspend timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT321 1.3.6.1.4.1.2637.2.1.2221.1.24
service ack timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT322 1.3.6.1.4.1.2637.2.1.2221.1.25
status enq timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersAtt5essT3m1 1.3.6.1.4.1.2637.2.1.2221.1.26
d-channel backup timer. 40 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsTable 1.3.6.1.4.1.2637.2.1.2222
ISDN Layer-3 NTI/DMS Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer3TimersNtiDmsEntry

iSDNLayer3TimersNtiDmsEntry 1.3.6.1.4.1.2637.2.1.2222.1
This is the structure of entries in the iSDNLayer3TimersNtiDmsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer3TimersNtiDmsEntry  

iSDNLayer3TimersNtiDmsPathString 1.3.6.1.4.1.2637.2.1.2222.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer3TimersNtiDmsRowStatus 1.3.6.1.4.1.2637.2.1.2222.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer3TimersNtiDmsKeyValue 1.3.6.1.4.1.2637.2.1.2222.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT302 1.3.6.1.4.1.2637.2.1.2222.1.11
overlap receiving timer. 15 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT303 1.3.6.1.4.1.2637.2.1.2222.1.12
call initiated timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT304 1.3.6.1.4.1.2637.2.1.2222.1.13
overlap sending timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT305 1.3.6.1.4.1.2637.2.1.2222.1.14
disconnect req timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT306 1.3.6.1.4.1.2637.2.1.2222.1.15
suspend req. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT308 1.3.6.1.4.1.2637.2.1.2222.1.16
release req. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT309 1.3.6.1.4.1.2637.2.1.2222.1.17
clear active calls timer. 90 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT310 1.3.6.1.4.1.2637.2.1.2222.1.18
connect timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT312 1.3.6.1.4.1.2637.2.1.2222.1.19
setup timer. 6 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT313 1.3.6.1.4.1.2637.2.1.2222.1.20
message frag timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT316 1.3.6.1.4.1.2637.2.1.2222.1.21
restart timer. 120 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT318 1.3.6.1.4.1.2637.2.1.2222.1.22
resume timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT319 1.3.6.1.4.1.2637.2.1.2222.1.23
suspend timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT321 1.3.6.1.4.1.2637.2.1.2222.1.24
service ack timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT322 1.3.6.1.4.1.2637.2.1.2222.1.25
status enq timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNtiDmsT3m1 1.3.6.1.4.1.2637.2.1.2222.1.26
d-channel backup timer. 40 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5Table 1.3.6.1.4.1.2637.2.1.2223
ISDN Layer-3 NET5 Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer3TimersNet5Entry

iSDNLayer3TimersNet5Entry 1.3.6.1.4.1.2637.2.1.2223.1
This is the structure of entries in the iSDNLayer3TimersNet5Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer3TimersNet5Entry  

iSDNLayer3TimersNet5PathString 1.3.6.1.4.1.2637.2.1.2223.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer3TimersNet5RowStatus 1.3.6.1.4.1.2637.2.1.2223.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer3TimersNet5KeyValue 1.3.6.1.4.1.2637.2.1.2223.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T302 1.3.6.1.4.1.2637.2.1.2223.1.11
overlap receiving timer. 15 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T303 1.3.6.1.4.1.2637.2.1.2223.1.12
call initiated timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T304 1.3.6.1.4.1.2637.2.1.2223.1.13
overlap sending timer. 15 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T305 1.3.6.1.4.1.2637.2.1.2223.1.14
disconnect req timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T306 1.3.6.1.4.1.2637.2.1.2223.1.15
suspend req. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T308 1.3.6.1.4.1.2637.2.1.2223.1.16
release req. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T309 1.3.6.1.4.1.2637.2.1.2223.1.17
clear active calls timer. 90 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T310 1.3.6.1.4.1.2637.2.1.2223.1.18
connect timer. 10 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T312 1.3.6.1.4.1.2637.2.1.2223.1.19
setup timer. 6 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T313 1.3.6.1.4.1.2637.2.1.2223.1.20
message frag timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T316 1.3.6.1.4.1.2637.2.1.2223.1.21
restart timer. 120 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T318 1.3.6.1.4.1.2637.2.1.2223.1.22
resume timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T319 1.3.6.1.4.1.2637.2.1.2223.1.23
suspend timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T321 1.3.6.1.4.1.2637.2.1.2223.1.24
service ack timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T322 1.3.6.1.4.1.2637.2.1.2223.1.25
status enq timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNet5T3m1 1.3.6.1.4.1.2637.2.1.2223.1.26
d-channel backup timer. 40 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttTable 1.3.6.1.4.1.2637.2.1.2224
ISDN Layer-3 NTT Timers Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ISDNLayer3TimersNttEntry

iSDNLayer3TimersNttEntry 1.3.6.1.4.1.2637.2.1.2224.1
This is the structure of entries in the iSDNLayer3TimersNttTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ISDNLayer3TimersNttEntry  

iSDNLayer3TimersNttPathString 1.3.6.1.4.1.2637.2.1.2224.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iSDNLayer3TimersNttRowStatus 1.3.6.1.4.1.2637.2.1.2224.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iSDNLayer3TimersNttKeyValue 1.3.6.1.4.1.2637.2.1.2224.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT302 1.3.6.1.4.1.2637.2.1.2224.1.11
overlap receiving timer. 15 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT303 1.3.6.1.4.1.2637.2.1.2224.1.12
call initiated timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT304 1.3.6.1.4.1.2637.2.1.2224.1.13
overlap sending timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT305 1.3.6.1.4.1.2637.2.1.2224.1.14
disconnect req timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT306 1.3.6.1.4.1.2637.2.1.2224.1.15
suspend req. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT308 1.3.6.1.4.1.2637.2.1.2224.1.16
release req. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT309 1.3.6.1.4.1.2637.2.1.2224.1.17
clear active calls timer. 90 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT310 1.3.6.1.4.1.2637.2.1.2224.1.18
connect timer. 40 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT312 1.3.6.1.4.1.2637.2.1.2224.1.19
setup timer. 6 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT313 1.3.6.1.4.1.2637.2.1.2224.1.20
message frag timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT316 1.3.6.1.4.1.2637.2.1.2224.1.21
restart timer. 120 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT318 1.3.6.1.4.1.2637.2.1.2224.1.22
resume timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT319 1.3.6.1.4.1.2637.2.1.2224.1.23
suspend timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT321 1.3.6.1.4.1.2637.2.1.2224.1.24
service ack timer. 30 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT322 1.3.6.1.4.1.2637.2.1.2224.1.25
status enq timer. 4 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iSDNLayer3TimersNttT3m1 1.3.6.1.4.1.2637.2.1.2224.1.26
d-channel backup timer. 40 sec
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

l2FHomeGatewayTable 1.3.6.1.4.1.2637.2.1.1350
Layer-2 Forwarding Home Gateway Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    L2FHomeGatewayEntry

l2FHomeGatewayEntry 1.3.6.1.4.1.2637.2.1.1350.1
This is the structure of entries in the l2FHomeGatewayTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  L2FHomeGatewayEntry  

l2FHomeGatewayPathString 1.3.6.1.4.1.2637.2.1.1350.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

l2FHomeGatewayRowStatus 1.3.6.1.4.1.2637.2.1.1350.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

l2FHomeGatewayKeyValue 1.3.6.1.4.1.2637.2.1.1350.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

l2FHomeGatewayIPAddress 1.3.6.1.4.1.2637.2.1.1350.1.11
IP address of L2F Home Gateway
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

l2FHomeGatewayHostName 1.3.6.1.4.1.2637.2.1.1350.1.12
Fully Qualified Domain Name (DNS name) of L2F Home Gateway
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

l2FHomeGatewaySendName 1.3.6.1.4.1.2637.2.1.1350.1.211
Name to send as the NAS name in the L2F CONF packet to open a tunnel
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

l2FHomeGatewaySendPassword 1.3.6.1.4.1.2637.2.1.1350.1.212
Password to send to the Home Gateway when sending the L2F OPEN packet to open a tunnel
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

l2FHomeGatewayReceiveName 1.3.6.1.4.1.2637.2.1.1350.1.213
Name to expect from the Home Gateway in the received L2F CONF packet when opening a tunnel. If left blank, then the Home Gateway's password will not be checked.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

l2FHomeGatewayReceivePassword 1.3.6.1.4.1.2637.2.1.1350.1.214
Password to expect from the Home Gateway when opening a tunnel. If left blank, then the Home Gateway's password will not be checked.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

l2FHomeGatewaySendChecksum 1.3.6.1.4.1.2637.2.1.1350.1.313
Include Checksum field in transmitted L2F frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

l2FHomeGatewayCheckChecksum 1.3.6.1.4.1.2637.2.1.1350.1.314
Check Checksum field in received L2F frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

l2FHomeGatewaySendUDPChecksum 1.3.6.1.4.1.2637.2.1.1350.1.315
Calculate and include UDP checksum in transmitted L2F frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

l2FHomeGatewayEchoInterval 1.3.6.1.4.1.2637.2.1.1350.1.411
Time (in seconds) between L2F Echo Request frames sent to the Home Gateway to determine if it is still responding. These frames will only be sent when no packets are received from the Home Gateway. 0 indicates that Echo frames will not be used to determine if the Home Gateway is responding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..60  

l2FHomeGatewayEchoRetries 1.3.6.1.4.1.2637.2.1.1350.1.412
The number of unanswered L2F Echo Request frames that will be sent to the Home Gateway before declaring the tunnel dead.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..10  

l2TPLNSTable 1.3.6.1.4.1.2637.2.1.1503
Layer-2 Tunneling Protocol Network Server Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    L2TPLNSEntry

l2TPLNSEntry 1.3.6.1.4.1.2637.2.1.1503.1
This is the structure of entries in the l2TPLNSTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  L2TPLNSEntry  

l2TPLNSPathString 1.3.6.1.4.1.2637.2.1.1503.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

l2TPLNSRowStatus 1.3.6.1.4.1.2637.2.1.1503.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

l2TPLNSKeyValue 1.3.6.1.4.1.2637.2.1.1503.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

l2TPLNSIPAddress 1.3.6.1.4.1.2637.2.1.1503.1.11
IP address of L2TP LNS
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

l2TPLNSSourceIPAddress 1.3.6.1.4.1.2637.2.1.1503.1.12
Source IP address for L2TP control messages and data packets that we send to this LNS. If this is not configured, then we will use the sourceIpAddress from the VPOP configuration. If that is not configured, then we will use the mgmt_addr from the ip_services configuration.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

l2TPLNSSendName 1.3.6.1.4.1.2637.2.1.1503.1.212
Name to send as the Host name in the L2TP Start Control Channel Reqest packet to open a tunnel
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

l2TPLNSSharedSecret 1.3.6.1.4.1.2637.2.1.1503.1.214
Shared Secret to use when opening a tunnel to the LNS. Used to authenticate the LNS and to authenticate ourselves to the LNS. Also used to encrypt certain AVPs such as the user name and PAP password. If left blank, tunnel authentication and AVP encryption will be disabled.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

l2TPLNSEnableUDPChecksum 1.3.6.1.4.1.2637.2.1.1503.1.311
Calculate and include UDP checksum in transmitted L2TP data packets.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

l2TPLNSHelloInterval 1.3.6.1.4.1.2637.2.1.1503.1.411
Time (in seconds)that must pass without any user data or control messages exchanged between the LAC and the LNS in oder for us to begin sending L2TP Hello messages to the LNS in order to determine if it is still responding. This time also specifies the duration between the transmitted L2TP Hello messages. Setting this to 0 will disable transmission of Hello messages to the LNS.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..3600  

l2TPLNSInitialAckTimeout 1.3.6.1.4.1.2637.2.1.1503.1.412
Time (in seconds) to wait for an acknowledgment of a control message sent to the LNS. If this times out, the timeout value will be doubled for subsequent timeouts (up to the value of MaxAckTimeout) until the limit on the number of retries is reached. This value must be less than the value for MaxAckTimeout.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..15  

l2TPLNSMaxAckTimeout 1.3.6.1.4.1.2637.2.1.1503.1.413
Maximum Time (in seconds) to wait for an acknowledgment of a control message sent to the LNS. As acknowledgements timeout, the timeout value is doubled each time until this limit is reached. This value must be more than the value for InitialAckTimeout.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..60  

l2TPLNSCtrlMsgRetries 1.3.6.1.4.1.2637.2.1.1503.1.414
When L2TP control messages are not acknowledged by the LNS, this specifies the number of times to retry before declaring the tunnel dead.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..10  

l2TPLNSCtrlMsgRxWindow 1.3.6.1.4.1.2637.2.1.1503.1.415
This is the Receive Window Size that we sent to the LNS during tunnel establishment. It specifies the number of L2TP Ctrl Messages the LNS is allowed to send to us without receiving an acknowledgement from us.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..100  

leasedLineConfigTable 1.3.6.1.4.1.2637.2.1.2301
Leased-line Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LeasedLineConfigEntry

leasedLineConfigEntry 1.3.6.1.4.1.2637.2.1.2301.1
This is the structure of entries in the leasedLineConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  LeasedLineConfigEntry  

leasedLineConfigPathString 1.3.6.1.4.1.2637.2.1.2301.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

leasedLineConfigRowStatus 1.3.6.1.4.1.2637.2.1.2301.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

leasedLineConfigKeyValue 1.3.6.1.4.1.2637.2.1.2301.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

leasedLineConfigAdminState 1.3.6.1.4.1.2637.2.1.2301.1.11
Leased Line Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

virtualLinkConfigTable 1.3.6.1.4.1.2637.2.1.2303
Virtual Line Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualLinkConfigEntry

virtualLinkConfigEntry 1.3.6.1.4.1.2637.2.1.2303.1
This is the structure of entries in the virtualLinkConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VirtualLinkConfigEntry  

virtualLinkConfigPathString 1.3.6.1.4.1.2637.2.1.2303.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

virtualLinkConfigRowStatus 1.3.6.1.4.1.2637.2.1.2303.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

virtualLinkConfigKeyValue 1.3.6.1.4.1.2637.2.1.2303.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  


virtualLinkConfigChannelEnable 1.3.6.1.4.1.2637.2.1.2303.1.12
Specifies whether this interface is to be activated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

virtualLinkConfigChannelName 1.3.6.1.4.1.2637.2.1.2303.1.13
HDLC Channel Name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

virtualLinkConfigChannelMap 1.3.6.1.4.1.2637.2.1.2303.1.14
This is a bit mask that represents which channels are configured on the T1. The value should be entered in as a decimal value. The default is all channels
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

virtualLinkConfigChannelDelineation 1.3.6.1.4.1.2637.2.1.2303.1.15
For the given HDLC channel, flag sequence insertion and bit stuffing is performed on the data stream. If set to TRUE, then flag sequence insertion and bit stuffing is performed
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

virtualLinkConfigChannelCRCType 1.3.6.1.4.1.2637.2.1.2303.1.16
HDLC channel CRC generation for outgoing data stream. CRC type is ignored when ChannelDelineation is FALSE
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER crcNone(0), crc16(1), crc32(2)  

virtualLinkConfigChannelIdle 1.3.6.1.4.1.2637.2.1.2303.1.17
Indicates that the HDLC channel should use flag bytes or HDLC idle as the interframe time fill between HDLC packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER flagBytes(0), hdlcIdle(1)  

virtualLinkConfigChannelFCSInvert 1.3.6.1.4.1.2637.2.1.2303.1.18
Controls the inversion of the FCS field inserted into the transmit packet. If set to TRUE, the FCS field in the outgoing HDLC stream is logically inverted. (NA for SCC)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

virtualLinkConfigChannelDataInvert 1.3.6.1.4.1.2637.2.1.2303.1.19
Controls the HDLC processor to logically invert the outgoing HDLC data stream. If set to TRUE, the outgoing HDLC stream is logically inverted. (NA for SCC)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  



virtualLinkConfigChannelRate 1.3.6.1.4.1.2637.2.1.2303.1.23
Indicates the rate of each individual DS0. (NA for SCC).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER chan56k(0), chan64k(1)  

virtualLinkConfigChannelQueueDepth 1.3.6.1.4.1.2637.2.1.2303.1.24
Internal queue depth for data to be transmitted by this Channel. Once queue depth is reached, data will be dropped until queue depth empties beyond this value. Data dropped is clipped from end of queue.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1000  

macConfigTable 1.3.6.1.4.1.2637.2.1.1401
MAC Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacConfigEntry

macConfigEntry 1.3.6.1.4.1.2637.2.1.1401.1
This is the structure of entries in the macConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacConfigEntry  

macConfigPathString 1.3.6.1.4.1.2637.2.1.1401.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

macConfigRowStatus 1.3.6.1.4.1.2637.2.1.1401.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

macConfigKeyValue 1.3.6.1.4.1.2637.2.1.1401.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

macConfigAdminState 1.3.6.1.4.1.2637.2.1.1401.1.11
MAC Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

iopConfigTable 1.3.6.1.4.1.2637.2.1.1431
IOP (Input/Output Processor) Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IopConfigEntry

iopConfigEntry 1.3.6.1.4.1.2637.2.1.1431.1
This is the structure of entries in the iopConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IopConfigEntry  

iopConfigPathString 1.3.6.1.4.1.2637.2.1.1431.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

iopConfigRowStatus 1.3.6.1.4.1.2637.2.1.1431.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

iopConfigKeyValue 1.3.6.1.4.1.2637.2.1.1431.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

iopConfigAdminState 1.3.6.1.4.1.2637.2.1.1431.1.11
IOP Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

iopConfigIOPImageName 1.3.6.1.4.1.2637.2.1.1431.1.112
Name of the code image file that should be loaded into the IOP's memory
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

iopConfigModemImageName 1.3.6.1.4.1.2637.2.1.1431.1.113
Name of the code image file that should be loaded into the modems' memory
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

dmmAdminConfigTable 1.3.6.1.4.1.2637.2.1.1441
DMM (Digital Modem Module) Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DmmAdminConfigEntry

dmmAdminConfigEntry 1.3.6.1.4.1.2637.2.1.1441.1
This is the structure of entries in the dmmAdminConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DmmAdminConfigEntry  

dmmAdminConfigPathString 1.3.6.1.4.1.2637.2.1.1441.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

dmmAdminConfigRowStatus 1.3.6.1.4.1.2637.2.1.1441.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dmmAdminConfigKeyValue 1.3.6.1.4.1.2637.2.1.1441.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

dmmAdminConfigAdminState 1.3.6.1.4.1.2637.2.1.1441.1.11
DMM Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

packAdminConfigTable 1.3.6.1.4.1.2637.2.1.1461
Pack Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PackAdminConfigEntry

packAdminConfigEntry 1.3.6.1.4.1.2637.2.1.1461.1
This is the structure of entries in the packAdminConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PackAdminConfigEntry  

packAdminConfigPathString 1.3.6.1.4.1.2637.2.1.1461.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

packAdminConfigRowStatus 1.3.6.1.4.1.2637.2.1.1461.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

packAdminConfigKeyValue 1.3.6.1.4.1.2637.2.1.1461.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

packAdminConfigAdminState 1.3.6.1.4.1.2637.2.1.1461.1.11
Pack Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

modemAdminConfigTable 1.3.6.1.4.1.2637.2.1.1471
Modem Administration Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModemAdminConfigEntry

modemAdminConfigEntry 1.3.6.1.4.1.2637.2.1.1471.1
This is the structure of entries in the modemAdminConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ModemAdminConfigEntry  

modemAdminConfigPathString 1.3.6.1.4.1.2637.2.1.1471.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

modemAdminConfigRowStatus 1.3.6.1.4.1.2637.2.1.1471.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

modemAdminConfigKeyValue 1.3.6.1.4.1.2637.2.1.1471.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

modemAdminConfigAdminState 1.3.6.1.4.1.2637.2.1.1471.1.11
Modem Administration adminSTate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

modemConfigTable 1.3.6.1.4.1.2637.2.1.1421
Modem Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModemConfigEntry

modemConfigEntry 1.3.6.1.4.1.2637.2.1.1421.1
This is the structure of entries in the modemConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ModemConfigEntry  

modemConfigPathString 1.3.6.1.4.1.2637.2.1.1421.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

modemConfigRowStatus 1.3.6.1.4.1.2637.2.1.1421.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

modemConfigKeyValue 1.3.6.1.4.1.2637.2.1.1421.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

modemConfigAnswerString 1.3.6.1.4.1.2637.2.1.1421.1.111
The AT command string sent to the modem to configure it and instruct it to answer an incoming call
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

modemConfigCallString 1.3.6.1.4.1.2637.2.1.1421.1.112
The AT command string sent to the modem to configure it and instruct it to place an outgoing call
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

modemConfigPhoneNumber 1.3.6.1.4.1.2637.2.1.1421.1.113
The phone number to dial when placing an outgoing call
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

modemConfigMinConnectSpeed 1.3.6.1.4.1.2637.2.1.1421.1.211
The minimum speed (in bits/second) at which the modem will connect
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 300..56000  

modemConfigMaxConnectSpeed 1.3.6.1.4.1.2637.2.1.1421.1.212
The maximum speed (in bits/second) at which the modem will connect
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 300..56000  

modemConfigFlowControl 1.3.6.1.4.1.2637.2.1.1421.1.311
Type of flow control to use when communicating with modem
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), hardware(1), software(2)  

modemConfigConnectTimeout 1.3.6.1.4.1.2637.2.1.1421.1.411
The time allowed for the modem to negotiate a connection with the remote modem
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..120000  

modemConfigDetectProtocol 1.3.6.1.4.1.2637.2.1.1421.1.511
True if the modem attempt to detect the protocol (PPP, command shell, etc.) used by the remote caller; false if the modem should assume the default protocol.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

modemConfigDetectDefault 1.3.6.1.4.1.2637.2.1.1421.1.512
The default protocol the modem should assume if either 1) it fails to detect the remote caller's protocol, or 2) detection is turned off in the configuration.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ppp(1), shell(2)  

modemConfigDetectTimeout 1.3.6.1.4.1.2637.2.1.1421.1.513
The time (in milliseconds) that the modem should wait while detecting the protocol used by the remote caller before giving up and using the configured default.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 500..30000  

modemConfigVoicePcmCoding 1.3.6.1.4.1.2637.2.1.1421.1.711
PCM coding standard
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER alaw(0), ulaw(1)  

modemConfigVoiceSilenceHandling 1.3.6.1.4.1.2637.2.1.1421.1.712
Silence handling during voice call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER comfort(0), silence(1)  

modemConfigVoiceFrameGeneration 1.3.6.1.4.1.2637.2.1.1421.1.713
Frame generation during calls
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(0)  

modemConfigVoiceG723Rate 1.3.6.1.4.1.2637.2.1.1421.1.714
G.723 bit sampling rate
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER high(0), low(1)  

modemConfigVoiceAdaptivePostfilter 1.3.6.1.4.1.2637.2.1.1421.1.715
Voice adaptive postfilter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoiceActivityDetect 1.3.6.1.4.1.2637.2.1.1421.1.716
Voice activity detector
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), pt13(2), nosilence(3)  

modemConfigVoicePacketInterval 1.3.6.1.4.1.2637.2.1.1421.1.717
RTP packet sample size
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 5..200  

modemConfigVoiceDtmfVoice 1.3.6.1.4.1.2637.2.1.1421.1.718
DTMF tones in voice channel
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoiceDtmfPayloads 1.3.6.1.4.1.2637.2.1.1421.1.719
DTMF tones in payloads
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoiceDtmfPayloadType 1.3.6.1.4.1.2637.2.1.1421.1.720
DTMF Payload type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

modemConfigVoiceDtmfRedundantType 1.3.6.1.4.1.2637.2.1.1421.1.721
DTMF redundant audio scheme type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

modemConfigVoiceDgainPackettoPCM 1.3.6.1.4.1.2637.2.1.1421.1.722
Digital gain for IP packet to PCM
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

modemConfigVoiceDgainPCMtoPacket 1.3.6.1.4.1.2637.2.1.1421.1.723
Digital gain for PCM to IP packet
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

modemConfigVoiceEchoTail 1.3.6.1.4.1.2637.2.1.1421.1.724
Echo canceller tail length
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..128  

modemConfigVoiceEchoRxMute 1.3.6.1.4.1.2637.2.1.1421.1.725
Echo canceller receive mute
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(0), mute(1)  

modemConfigVoiceEchoTxMute 1.3.6.1.4.1.2637.2.1.1421.1.726
Echo canceller transmit mute
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(0), mute(1)  

modemConfigVoiceEchoTxFixedGain 1.3.6.1.4.1.2637.2.1.1421.1.727
Echo canceller fixed transmit gain
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER nlp(0), fixed(1)  

modemConfigVoiceEchoCoeffFreeze 1.3.6.1.4.1.2637.2.1.1421.1.728
Echo canceller Coefficient freeze
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER update(0), freeze(1)  

modemConfigVoiceEchoReset 1.3.6.1.4.1.2637.2.1.1421.1.729
Hardware echo canceller reset
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoiceEchoDisable 1.3.6.1.4.1.2637.2.1.1421.1.730
Hardware echo canceller disable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(0)  

modemConfigVoiceEchoMasterEnable 1.3.6.1.4.1.2637.2.1.1421.1.731
Master echo canceller enable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoiceLatePacketMax 1.3.6.1.4.1.2637.2.1.1421.1.732
Late packet maximum delay
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..200  

modemConfigVoiceLatePacketMin 1.3.6.1.4.1.2637.2.1.1421.1.733
Late Packet minimum delay
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..200  

modemConfigVoiceLatePacketWin 1.3.6.1.4.1.2637.2.1.1421.1.734
Initial late packet window
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..200  

modemConfigVoiceLatePacketRatio 1.3.6.1.4.1.2637.2.1.1421.1.735
Late packet quality ratio
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..100  

modemConfigVoiceFaxModemAutoswitch 1.3.6.1.4.1.2637.2.1.1421.1.736
Fax/Modem autoswitch
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoicePayloadTypeAutoswitch 1.3.6.1.4.1.2637.2.1.1421.1.737
Payload type autoswitch
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoiceAutoswitchPacketSize 1.3.6.1.4.1.2637.2.1.1421.1.738
Payload Autoswitch size
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..200  

modemConfigVoiceNoPathTeardown 1.3.6.1.4.1.2637.2.1.1421.1.739
No voice path teardown
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..100000  

modemConfigVoiceRtcpPeriod 1.3.6.1.4.1.2637.2.1.1421.1.740
RTCP packet interval
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..100000  

modemConfigVoiceStatsPeriod 1.3.6.1.4.1.2637.2.1.1421.1.741
Statistic update period
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..100000  

modemConfigVoiceDspPatch 1.3.6.1.4.1.2637.2.1.1421.1.750
Enables dsp patch for conexant voice codecs
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

modemConfigVoiceDspPatchString 1.3.6.1.4.1.2637.2.1.1421.1.751
Patch string parsed and sent to Conexant dsp
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

udlConfigTable 1.3.6.1.4.1.2637.2.1.4053
NCP/UDL Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UdlConfigEntry

udlConfigEntry 1.3.6.1.4.1.2637.2.1.4053.1
This is the structure of entries in the udlConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  UdlConfigEntry  

udlConfigPathString 1.3.6.1.4.1.2637.2.1.4053.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

udlConfigRowStatus 1.3.6.1.4.1.2637.2.1.4053.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

udlConfigKeyValue 1.3.6.1.4.1.2637.2.1.4053.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

udlConfigEnabled 1.3.6.1.4.1.2637.2.1.4053.1.11
UDL enabled?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

udlConfigIpaddress 1.3.6.1.4.1.2637.2.1.4053.1.12
UDL IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

udlConfigIpmask 1.3.6.1.4.1.2637.2.1.4053.1.13
UDL IP Mask.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

udlConfigDumpserver 1.3.6.1.4.1.2637.2.1.4053.1.14
UDL Dumpserver.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

udlConfigDumpfile 1.3.6.1.4.1.2637.2.1.4053.1.15
UDL Dumpfile.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

pppConfigTable 1.3.6.1.4.1.2637.2.1.1313
PPP Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppConfigEntry

pppConfigEntry 1.3.6.1.4.1.2637.2.1.1313.1
This is the structure of entries in the pppConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PppConfigEntry  

pppConfigPathString 1.3.6.1.4.1.2637.2.1.1313.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

pppConfigRowStatus 1.3.6.1.4.1.2637.2.1.1313.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pppConfigKeyValue 1.3.6.1.4.1.2637.2.1.1313.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppConfigEstablishTimeLimit 1.3.6.1.4.1.2637.2.1.1313.1.111
The amount of time allowed for initial LCP negotiation and authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..300000  

pppConfigConnectLimit 1.3.6.1.4.1.2637.2.1.1313.1.112
Overall connection time limit (in minutes, 0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppConfigInactivityLimit 1.3.6.1.4.1.2637.2.1.1313.1.113
Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..120  

pppConfigMonitorTxActivity 1.3.6.1.4.1.2637.2.1.1313.1.114
If an inactivity limit is set, specifies whether transmitted packets (sent to the remote caller) should be monitored for activity. If set to false, then transmitted data is ignored, and cannot keep the call up.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigMonitorRxActivity 1.3.6.1.4.1.2637.2.1.1313.1.115
If an inactivity limit is set, specifies whether received packets (sent by the remote caller) should be monitored for activity. If set to false, then received data is ignored, and cannot keep the call up.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigCountRIP 1.3.6.1.4.1.2637.2.1.1313.1.116
Specifies whether RIP frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigCountPings 1.3.6.1.4.1.2637.2.1.1313.1.117
Specifies whether ICMP Echo Request and Echo Reply (ping) frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigCountIGMP 1.3.6.1.4.1.2637.2.1.1313.1.118
Specifies whether IGMP frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigUseEchoes 1.3.6.1.4.1.2637.2.1.1313.1.211
Send periodic LCP Echo-Request frames to detect dead links
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendID 1.3.6.1.4.1.2637.2.1.1313.1.212
Send LCP Identification frame when LCP negotiation begins
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendTimeRemaining 1.3.6.1.4.1.2637.2.1.1313.1.213
Send periodic LCP Time-Remaining frames to inform remote peer of connection time limit
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendMRU 1.3.6.1.4.1.2637.2.1.1313.1.311
Include the Maximum-Receive-Unit option in transmitted LCP Configure-Request frames, informing remote peer of local MRU value
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendACCM 1.3.6.1.4.1.2637.2.1.1313.1.312
Include the Asynchronous-Control-Character-Map option in transmitted LCP Configure-Request frames, informing remote peer of control characters it must escape when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendMagic 1.3.6.1.4.1.2637.2.1.1313.1.313
Include the Magic-Number option in transmitted LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendPFC 1.3.6.1.4.1.2637.2.1.1313.1.314
Include the Protocol-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendACFC 1.3.6.1.4.1.2637.2.1.1313.1.315
Include the Address-and-Control-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting, allowing the remote peer to omit the Address and Control fields when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendShortSeq 1.3.6.1.4.1.2637.2.1.1313.1.316
Include the Multilink Short Sequence Number option in transmitted LCP Configure-Request frames, allowing peer to transmit MLP frames with short (12-bit) sequence numbers
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendEndpointDisc 1.3.6.1.4.1.2637.2.1.1313.1.317
Include the Multilink Endpoint Discriminator option in transmitted LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAllowMRU 1.3.6.1.4.1.2637.2.1.1313.1.321
Allow the remote peer to specify its Maximum-Receive-Unit value in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAllowACCM 1.3.6.1.4.1.2637.2.1.1313.1.322
Allow the remote peer to include its Asynchronous-Control-Character-Map value in LCP Configure-Request frames its transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAllowMagic 1.3.6.1.4.1.2637.2.1.1313.1.323
Allow the remote peer to include its Magic-Number value in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAllowPFC 1.3.6.1.4.1.2637.2.1.1313.1.324
Allow the remote peer to include the Protocol-Field-Compression option in LCP Configure-Request frames it transmits, allowing the local interface to compress the protocol field when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAllowACFC 1.3.6.1.4.1.2637.2.1.1313.1.325
Allow the remote peer to include the Address-and-Control-Field-Compression option in LCP Configure-Request frames it transmits, allowing the remote peer to compress the protocol field when transmitting, allowing the local interface to omit the Address and Control fields when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAllowShortSeq 1.3.6.1.4.1.2637.2.1.1313.1.326
Allow the peer to include the Multilink Short Sequence Number option in LCP Configure-Request frames it transmits, instructing the local interface to transmit MLP frames with short (12-bit) sequence numbers
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAllowEndpointDisc 1.3.6.1.4.1.2637.2.1.1313.1.327
Allow the remote peer to include the Multilink Endpoint Discriminator option in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLCPMaxConfigure 1.3.6.1.4.1.2637.2.1.1313.1.411
Max-Configure value for LCP negotiation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..20  

pppConfigLCPRestartTimer 1.3.6.1.4.1.2637.2.1.1313.1.412
Time (in milliseconds) between unanswered LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppConfigPassiveLCP 1.3.6.1.4.1.2637.2.1.1313.1.413
Don't send an LCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigPassiveLCPTimeout 1.3.6.1.4.1.2637.2.1.1313.1.414
The amount of time (in milliseconds) that LCP will wait for the peer to send a Configure-Request before sending one
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 50..3000  

pppConfigMinRemoteMRU 1.3.6.1.4.1.2637.2.1.1313.1.511
Minimum acceptable value for Max-Receive-Unit specified by remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppConfigMinLocalMRU 1.3.6.1.4.1.2637.2.1.1313.1.512
Minimum acceptable value for Max-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1500  

pppConfigDesiredLocalMRU 1.3.6.1.4.1.2637.2.1.1313.1.513
Desired value for Max-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1536  

pppConfigTransmitACCM 1.3.6.1.4.1.2637.2.1.1313.1.514
Required bits in transmit Async-Character-Control-Mask (specified in remote peer's Configure-Request)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppConfigReceiveACCM 1.3.6.1.4.1.2637.2.1.1313.1.515
Required bits in receive Async-Character-Control-Mask (specified in local interface's Configure-Request)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppConfigMinRemoteMRRU 1.3.6.1.4.1.2637.2.1.1313.1.516
Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer. If peer will not negotiate an MRRU this size or greater, then multilink will not be allowed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppConfigDesiredRemoteMRRU 1.3.6.1.4.1.2637.2.1.1313.1.517
Desired value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppConfigMinLocalMRRU 1.3.6.1.4.1.2637.2.1.1313.1.518
Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppConfigDesiredLocalMRRU 1.3.6.1.4.1.2637.2.1.1313.1.519
Desired value for Multilink Max-Reconstructed-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppConfigLCPEchoRetries 1.3.6.1.4.1.2637.2.1.1313.1.520
The number of unanswered LCP Echo-Requests transmitted before the link is declared dead
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppConfigLCPEchoTimeout 1.3.6.1.4.1.2637.2.1.1313.1.521
Time (in milliseconds) between answered LCP Echo-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 30000..600000  

pppConfigLCPEchoErrorTimeout 1.3.6.1.4.1.2637.2.1.1313.1.522
Time (in milliseconds) between unanswered LCP Echo-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..60000  

pppConfigTimeRemainingInterval 1.3.6.1.4.1.2637.2.1.1313.1.523
Time (in milliseconds) between transmitted Time-Remaining frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 300000..1200000  

pppConfigIDText 1.3.6.1.4.1.2637.2.1.1313.1.524
Text sent in LCP Identification frame transmitted when LCP negotiation begins
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppConfigAuthRequire 1.3.6.1.4.1.2637.2.1.1313.1.611
Require authentication of remote peer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAuthAllow 1.3.6.1.4.1.2637.2.1.1313.1.612
Allow remote peer to require authentication of local interface
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigAuthServerProtocol1 1.3.6.1.4.1.2637.2.1.1313.1.620
1st preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigAuthServerProtocol2 1.3.6.1.4.1.2637.2.1.1313.1.621
2nd preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigAuthServerProtocol3 1.3.6.1.4.1.2637.2.1.1313.1.622
3rd preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigAuthServerProtocol4 1.3.6.1.4.1.2637.2.1.1313.1.623
4th preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigAuthClientProtocol1 1.3.6.1.4.1.2637.2.1.1313.1.631
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigAuthClientProtocol2 1.3.6.1.4.1.2637.2.1.1313.1.632
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigAuthClientProtocol3 1.3.6.1.4.1.2637.2.1.1313.1.633
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigAuthClientProtocol4 1.3.6.1.4.1.2637.2.1.1313.1.634
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppConfigPAPClientRetries 1.3.6.1.4.1.2637.2.1.1313.1.641
Number of retries Password Authentication Protocol client will make when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppConfigPAPClientTimeout 1.3.6.1.4.1.2637.2.1.1313.1.642
Time between transmitted Password Authentication Protocol Authenticate-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppConfigPAPServerRetries 1.3.6.1.4.1.2637.2.1.1313.1.643
Number of authentication attempts granted to the remote peer when using the Password Authentication Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppConfigPAPServerTimeout 1.3.6.1.4.1.2637.2.1.1313.1.644
Not sure this applies...
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppConfigCHAPClientRetries 1.3.6.1.4.1.2637.2.1.1313.1.651
Number of retries the CHAP client will make when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppConfigCHAPClientTimeout 1.3.6.1.4.1.2637.2.1.1313.1.652
Time between transmitted CHAP Response frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppConfigCHAPServerRetries 1.3.6.1.4.1.2637.2.1.1313.1.653
Number of authentication attempts granted to the remote peer when using CHAP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppConfigCHAPServerChallenges 1.3.6.1.4.1.2637.2.1.1313.1.654
Number of unanswered Challenge frames sent to the remote peer when using CHAP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppConfigCHAPServerTimeout 1.3.6.1.4.1.2637.2.1.1313.1.655
Time between transmitted CHAP Challenge frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppConfigCHAPValueLength 1.3.6.1.4.1.2637.2.1.1313.1.656
The length (in octets) of the CHAP Value sent to the remote user in CHAP Challenge frames. This number must be a factor of 4. Note that some RADIUS servers support only Challenge Values of 16 bytes, so this length should not be changed unless it is supported by the RADIUS server in use.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 16..64  

pppConfigAuthFailureRenegotiatesLCP 1.3.6.1.4.1.2637.2.1.1313.1.657
Determines what occurs after an authentication failure. If true, and if more than one authentication protocol is enabled (in AuthServerProtocol1, 2, etc.), then LCP is renegotiated with the second authentication protocol.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigUserName 1.3.6.1.4.1.2637.2.1.1313.1.661
User name used when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppConfigPassword 1.3.6.1.4.1.2637.2.1.1313.1.662
Password used when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppConfigIPCPEnabled 1.3.6.1.4.1.2637.2.1.1313.1.711
IP Control Protocol Enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLocalIPAddress 1.3.6.1.4.1.2637.2.1.1313.1.712
IP address assigned to the local side of the PPP link
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppConfigRemoteIPAddress 1.3.6.1.4.1.2637.2.1.1313.1.713
IP address assigned to the remote peer of the PPP link
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppConfigAllowPeerIPAddress 1.3.6.1.4.1.2637.2.1.1313.1.714
Allow remote peer to specify its IP address. Note that if this option is enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigVJEnabled 1.3.6.1.4.1.2637.2.1.1313.1.715
Specifies whether Van Jacobson TCP/IP header compression (as specified in RFC 1144) should be negotiated. Due to bugs in some widely-available implementations, this option specifies whether VJ is enabled or disabled in both directions (compression and decompression).
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigVJSlots 1.3.6.1.4.1.2637.2.1.1313.1.716
Specifies the number of Van Jacobson TCP/IP compression slots to use in each direction (compression and decompression). The default of 16 is strongly recommended, as many widely-available implementations do not interoperate when a different number is negotiated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..32  

pppConfigSendDNS 1.3.6.1.4.1.2637.2.1.1313.1.717
Send configured Domain Name Server addresses to the remote peer, according to RFC 1877
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigSendNBNS 1.3.6.1.4.1.2637.2.1.1313.1.718
Send configured NetBIOS Name Server addresses to the remote peer, according to RFC 1877
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigIPCPMaxConfigure 1.3.6.1.4.1.2637.2.1.1313.1.719
Max-Configure value for IPCP negotiation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..20  

pppConfigIPCPRestartTimer 1.3.6.1.4.1.2637.2.1.1313.1.720
Time (in milliseconds) between unanswered IPCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppConfigPassiveIPCP 1.3.6.1.4.1.2637.2.1.1313.1.721
Don't send an IPCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigPassiveIPCPTimeout 1.3.6.1.4.1.2637.2.1.1313.1.722
The amount of time (in milliseconds) that IPCP will wait for the peer to send a Configure-Request before sending one
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 50..3000  

pppConfigDNS1 1.3.6.1.4.1.2637.2.1.1313.1.723
Primary Doman Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppConfigDNS2 1.3.6.1.4.1.2637.2.1.1313.1.724
Secondary Doman Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppConfigNBNS1 1.3.6.1.4.1.2637.2.1.1313.1.725
Primary NetBIOS Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppConfigNBNS2 1.3.6.1.4.1.2637.2.1.1313.1.726
Secondary NetBIOS Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppConfigSendLocalIPAddress 1.3.6.1.4.1.2637.2.1.1313.1.727
Specifies when the local IP address should be send to the remote peer in an IPCP Configure-Request frame. If set to Requested, then the option is sent only if the remote peer requests it via a Configure-Nak option.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER never(0), requested(1), always(2)  

pppConfigPeerNSStrategy 1.3.6.1.4.1.2637.2.1.1313.1.729
Specifies how DNS/NBNS values suggested by peer will be handled. They will either be Config-Rejected (Reject), Config-Acked (Ack), or ignored and negotiated with Config-Nak with the configured values (Ignore).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ignore(0), ack(1), reject(2)  

pppConfigMLPEnabled 1.3.6.1.4.1.2637.2.1.1313.1.811
Multilink protocol (MLP) enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  


pppConfigMLPFragmentSize 1.3.6.1.4.1.2637.2.1.1313.1.813
Minimum size of a protocol frame that will be fragmented when transmitted with the Multilink protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1500  

pppConfigMLPMaxFragments 1.3.6.1.4.1.2637.2.1.1313.1.814
Maximum number of MLP fragments that a transmit frame will be divided into
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4  

pppConfigMLPScaleFragments 1.3.6.1.4.1.2637.2.1.1313.1.815
Should Multilink fragment sizes depend on the relative speed of the links?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigMLPSendNullFragments 1.3.6.1.4.1.2637.2.1.1313.1.816
Should Multilink periodically send null fragments to help the remote peer in discarding dead fragments?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigMLPNullFragmentTimeout 1.3.6.1.4.1.2637.2.1.1313.1.817
The amount of time (in seconds) between null Multilink fragments sent to the remote peer. This value is valid only if this feature is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..3600  

pppConfigMLPEndpointDisc 1.3.6.1.4.1.2637.2.1.1313.1.818
Specifies the type of Endpoint Discriminator the CVX should send when negotiating Multilink. Specifying anything but the default (MAC address) can cause complete failures for remote users. Do not change this setting unless instructed to do so by a Nortel Networks employee.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER mACAddress(0), groupNumber(1)  

pppConfigMLPGroupNumber 1.3.6.1.4.1.2637.2.1.1313.1.819
Multilink group number. This is valid only when the MLP endpoint discriminator type is set to GroupNumber. This should only be configured when you have been instructed to do so by a Nortel Networks employee.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..999999  

pppConfigLogEnabled 1.3.6.1.4.1.2637.2.1.1313.1.911
Specifies whether PPP events should be logged
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogDump 1.3.6.1.4.1.2637.2.1.1313.1.912
[Not implemented yet];
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogSize 1.3.6.1.4.1.2637.2.1.1313.1.920
Number of events in the PPP log buffer. Each log event requires 24 bytes of memory; the default of 128 requires 3K of memory per call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 64..1024  

pppConfigLogControlFrames 1.3.6.1.4.1.2637.2.1.1313.1.921
If PPP logging is enabled, specifies whether transmitted and received control frames should be logged. Control frames include LCP and IPCP frames. This should always be on.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogProtocolFrames 1.3.6.1.4.1.2637.2.1.1313.1.922
If PPP logging is enabled, specifies whether transmitted and received protocol frames should be logged. Protocol frames include all IP frames (UDP, TCP, DNS, etc.). This should always be on.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogOptions 1.3.6.1.4.1.2637.2.1.1313.1.923
If PPP logging is enabled, specifies whether PPP negotiation options should be logged. This is particularly useful for diagnosing PPP connection problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogStates 1.3.6.1.4.1.2637.2.1.1313.1.924
If PPP logging is enabled, specifies whether PPP events and state transitions should be logged. This is sometimes useful in diagnosing PPP connection problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogCompression 1.3.6.1.4.1.2637.2.1.1313.1.925
If PPP logging is enabled, specifies whether PPP data compression events should be logged. This is useful in diagnosing compression performance problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogMLP 1.3.6.1.4.1.2637.2.1.1313.1.926
If PPP logging is enabled, specifies whether PPP Multilink events should be logged. This is useful in diagnosing multilink performance problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigLogVJ 1.3.6.1.4.1.2637.2.1.1313.1.927
If PPP logging is enabled, specifies whether PPP VJ header compression events should be logged. This is useful in diagnosing TCP/IP performance problems when VJ header compression is enabled and negotiated.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigCCPEnabled 1.3.6.1.4.1.2637.2.1.1313.1.1011
Specifies whether the Compression Control Protocol (RFC 1962) is enabled. Note that enabling CCP does not automatically cause the CVX to compress frames it transmits; that is controlled by the CompressFrames entry. This configuration was split into two options because many common client implementations of CCP can take over 30 seconds to connect when CCP is disabled. To get these clients to connect quickly, set CCPEnabled to 'true'. To prevent the CVX from actually compressing the data, set CompressFrames to 'false.'
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigCompressFrames 1.3.6.1.4.1.2637.2.1.1313.1.1012
Compress transmitted frames when CCP has been negotiated. Set this to 'false' to prevent the CVX from compressing frames, even when CCP is enabled and negotiated successfully.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigStac3Enabled 1.3.6.1.4.1.2637.2.1.1313.1.1013
Stac check mode 3 (Sequence Number) enabled (RFC 1962)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigStac4Enabled 1.3.6.1.4.1.2637.2.1.1313.1.1014
Stac check mode 4 (Extended Mode) enabled (RFC 1962)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigMPPCEnabled 1.3.6.1.4.1.2637.2.1.1313.1.1015
Microsoft Point-to-Point Compression enabled (RFC 2118)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigStacPerformance 1.3.6.1.4.1.2637.2.1.1313.1.1016
Stac compression performance parameter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

pppConfigStacMode 1.3.6.1.4.1.2637.2.1.1313.1.1017
Stac compression performance mode parameter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2  

pppConfigIPXCPEnabled 1.3.6.1.4.1.2637.2.1.1313.1.1111
IPX Control Protocol enabled. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppConfigIPXNetworkNumber 1.3.6.1.4.1.2637.2.1.1313.1.1112
IPX network number to assign to remote user. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppConfigIPXNodeNumber 1.3.6.1.4.1.2637.2.1.1313.1.1113
IPX node number to assign to remote user. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

pppModemConfigTable 1.3.6.1.4.1.2637.2.1.1314
PPP Modem Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppModemConfigEntry

pppModemConfigEntry 1.3.6.1.4.1.2637.2.1.1314.1
This is the structure of entries in the pppModemConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PppModemConfigEntry  

pppModemConfigPathString 1.3.6.1.4.1.2637.2.1.1314.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

pppModemConfigRowStatus 1.3.6.1.4.1.2637.2.1.1314.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pppModemConfigKeyValue 1.3.6.1.4.1.2637.2.1.1314.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppModemConfigEstablishTimeLimit 1.3.6.1.4.1.2637.2.1.1314.1.111
The amount of time allowed for initial LCP negotiation and authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..300000  

pppModemConfigConnectLimit 1.3.6.1.4.1.2637.2.1.1314.1.112
Overall connection time limit (in minutes, 0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppModemConfigInactivityLimit 1.3.6.1.4.1.2637.2.1.1314.1.113
Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..120  

pppModemConfigMonitorTxActivity 1.3.6.1.4.1.2637.2.1.1314.1.114
If an inactivity limit is set, specifies whether transmitted packets (sent to the remote caller) should be monitored for activity. If set to false, then transmitted data is ignored, and cannot keep the call up.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigMonitorRxActivity 1.3.6.1.4.1.2637.2.1.1314.1.115
If an inactivity limit is set, specifies whether received packets (sent by the remote caller) should be monitored for activity. If set to false, then received data is ignored, and cannot keep the call up.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigCountRIP 1.3.6.1.4.1.2637.2.1.1314.1.116
Specifies whether RIP frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigCountPings 1.3.6.1.4.1.2637.2.1.1314.1.117
Specifies whether ICMP Echo Request and Echo Reply (ping) frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigCountIGMP 1.3.6.1.4.1.2637.2.1.1314.1.118
Specifies whether IGMP frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigUseEchoes 1.3.6.1.4.1.2637.2.1.1314.1.211
Send periodic LCP Echo-Request frames to detect dead links
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendID 1.3.6.1.4.1.2637.2.1.1314.1.212
Send LCP Identification frame when LCP negotiation begins
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendTimeRemaining 1.3.6.1.4.1.2637.2.1.1314.1.213
Send periodic LCP Time-Remaining frames to inform remote peer of connection time limit
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendMRU 1.3.6.1.4.1.2637.2.1.1314.1.311
Include the Maximum-Receive-Unit option in transmitted LCP Configure-Request frames, informing remote peer of local MRU value
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendACCM 1.3.6.1.4.1.2637.2.1.1314.1.312
Include the Asynchronous-Control-Character-Map option in transmitted LCP Configure-Request frames, informing remote peer of control characters it must escape when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendMagic 1.3.6.1.4.1.2637.2.1.1314.1.313
Include the Magic-Number option in transmitted LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendPFC 1.3.6.1.4.1.2637.2.1.1314.1.314
Include the Protocol-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendACFC 1.3.6.1.4.1.2637.2.1.1314.1.315
Include the Address-and-Control-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting, allowing the remote peer to omit the Address and Control fields when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendShortSeq 1.3.6.1.4.1.2637.2.1.1314.1.316
Include the Multilink Short Sequence Number option in transmitted LCP Configure-Request frames, allowing peer to transmit MLP frames with short (12-bit) sequence numbers
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendEndpointDisc 1.3.6.1.4.1.2637.2.1.1314.1.317
Include the Multilink Endpoint Discriminator option in transmitted LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAllowMRU 1.3.6.1.4.1.2637.2.1.1314.1.321
Allow the remote peer to specify its Maximum-Receive-Unit value in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAllowACCM 1.3.6.1.4.1.2637.2.1.1314.1.322
Allow the remote peer to include its Asynchronous-Control-Character-Map value in LCP Configure-Request frames its transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAllowMagic 1.3.6.1.4.1.2637.2.1.1314.1.323
Allow the remote peer to include its Magic-Number value in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAllowPFC 1.3.6.1.4.1.2637.2.1.1314.1.324
Allow the remote peer to include the Protocol-Field-Compression option in LCP Configure-Request frames it transmits, allowing the local interface to compress the protocol field when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAllowACFC 1.3.6.1.4.1.2637.2.1.1314.1.325
Allow the remote peer to include the Address-and-Control-Field-Compression option in LCP Configure-Request frames it transmits, allowing the remote peer to compress the protocol field when transmitting, allowing the local interface to omit the Address and Control fields when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAllowShortSeq 1.3.6.1.4.1.2637.2.1.1314.1.326
Allow the peer to include the Multilink Short Sequence Number option in LCP Configure-Request frames it transmits, instructing the local interface to transmit MLP frames with short (12-bit) sequence numbers
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAllowEndpointDisc 1.3.6.1.4.1.2637.2.1.1314.1.327
Allow the remote peer to include the Multilink Endpoint Discriminator option in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLCPMaxConfigure 1.3.6.1.4.1.2637.2.1.1314.1.411
Max-Configure value for LCP negotiation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..20  

pppModemConfigLCPRestartTimer 1.3.6.1.4.1.2637.2.1.1314.1.412
Time (in milliseconds) between unanswered LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppModemConfigPassiveLCP 1.3.6.1.4.1.2637.2.1.1314.1.413
Don't send an LCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigPassiveLCPTimeout 1.3.6.1.4.1.2637.2.1.1314.1.414
The amount of time (in milliseconds) that LCP will wait for the peer to send a Configure-Request before sending one
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 50..3000  

pppModemConfigMinRemoteMRU 1.3.6.1.4.1.2637.2.1.1314.1.511
Minimum acceptable value for Max-Receive-Unit specified by remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppModemConfigMinLocalMRU 1.3.6.1.4.1.2637.2.1.1314.1.512
Minimum acceptable value for Max-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1500  

pppModemConfigDesiredLocalMRU 1.3.6.1.4.1.2637.2.1.1314.1.513
Desired value for Max-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1536  

pppModemConfigTransmitACCM 1.3.6.1.4.1.2637.2.1.1314.1.514
Required bits in transmit Async-Character-Control-Mask (specified in remote peer's Configure-Request)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppModemConfigReceiveACCM 1.3.6.1.4.1.2637.2.1.1314.1.515
Required bits in receive Async-Character-Control-Mask (specified in local interface's Configure-Request)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppModemConfigMinRemoteMRRU 1.3.6.1.4.1.2637.2.1.1314.1.516
Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer. If peer will not negotiate an MRRU this size or greater, then multilink will not be allowed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppModemConfigDesiredRemoteMRRU 1.3.6.1.4.1.2637.2.1.1314.1.517
Desired value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppModemConfigMinLocalMRRU 1.3.6.1.4.1.2637.2.1.1314.1.518
Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppModemConfigDesiredLocalMRRU 1.3.6.1.4.1.2637.2.1.1314.1.519
Desired value for Multilink Max-Reconstructed-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppModemConfigLCPEchoRetries 1.3.6.1.4.1.2637.2.1.1314.1.520
The number of unanswered LCP Echo-Requests transmitted before the link is declared dead
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppModemConfigLCPEchoTimeout 1.3.6.1.4.1.2637.2.1.1314.1.521
Time (in milliseconds) between answered LCP Echo-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 30000..600000  

pppModemConfigLCPEchoErrorTimeout 1.3.6.1.4.1.2637.2.1.1314.1.522
Time (in milliseconds) between unanswered LCP Echo-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..60000  

pppModemConfigTimeRemainingInterval 1.3.6.1.4.1.2637.2.1.1314.1.523
Time (in milliseconds) between transmitted Time-Remaining frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 300000..1200000  

pppModemConfigIDText 1.3.6.1.4.1.2637.2.1.1314.1.524
Text sent in LCP Identification frame transmitted when LCP negotiation begins
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppModemConfigAuthRequire 1.3.6.1.4.1.2637.2.1.1314.1.611
Require authentication of remote peer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAuthAllow 1.3.6.1.4.1.2637.2.1.1314.1.612
Allow remote peer to require authentication of local interface
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigAuthServerProtocol1 1.3.6.1.4.1.2637.2.1.1314.1.620
1st preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigAuthServerProtocol2 1.3.6.1.4.1.2637.2.1.1314.1.621
2nd preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigAuthServerProtocol3 1.3.6.1.4.1.2637.2.1.1314.1.622
3rd preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigAuthServerProtocol4 1.3.6.1.4.1.2637.2.1.1314.1.623
4th preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigAuthClientProtocol1 1.3.6.1.4.1.2637.2.1.1314.1.631
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigAuthClientProtocol2 1.3.6.1.4.1.2637.2.1.1314.1.632
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigAuthClientProtocol3 1.3.6.1.4.1.2637.2.1.1314.1.633
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigAuthClientProtocol4 1.3.6.1.4.1.2637.2.1.1314.1.634
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppModemConfigPAPClientRetries 1.3.6.1.4.1.2637.2.1.1314.1.641
Number of retries Password Authentication Protocol client will make when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppModemConfigPAPClientTimeout 1.3.6.1.4.1.2637.2.1.1314.1.642
Time between transmitted Password Authentication Protocol Authenticate-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppModemConfigPAPServerRetries 1.3.6.1.4.1.2637.2.1.1314.1.643
Number of authentication attempts granted to the remote peer when using the Password Authentication Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppModemConfigPAPServerTimeout 1.3.6.1.4.1.2637.2.1.1314.1.644
Not sure this applies...
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppModemConfigCHAPClientRetries 1.3.6.1.4.1.2637.2.1.1314.1.651
Number of retries the CHAP client will make when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppModemConfigCHAPClientTimeout 1.3.6.1.4.1.2637.2.1.1314.1.652
Time between transmitted CHAP Response frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppModemConfigCHAPServerRetries 1.3.6.1.4.1.2637.2.1.1314.1.653
Number of authentication attempts granted to the remote peer when using CHAP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppModemConfigCHAPServerChallenges 1.3.6.1.4.1.2637.2.1.1314.1.654
Number of unanswered Challenge frames sent to the remote peer when using CHAP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppModemConfigCHAPServerTimeout 1.3.6.1.4.1.2637.2.1.1314.1.655
Time between transmitted CHAP Challenge frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppModemConfigCHAPValueLength 1.3.6.1.4.1.2637.2.1.1314.1.656
The length (in octets) of the CHAP Value sent to the remote user in CHAP Challenge frames. This number must be a factor of 4. Note that some RADIUS servers support only Challenge Values of 16 bytes, so this length should not be changed unless it is supported by the RADIUS server in use.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 16..64  

pppModemConfigAuthFailureRenegotiatesLCP 1.3.6.1.4.1.2637.2.1.1314.1.657
Determines what occurs after an authentication failure. If true, and if more than one authentication protocol is enabled (in AuthServerProtocol1, 2, etc.), then LCP is renegotiated with the second authentication protocol.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigUserName 1.3.6.1.4.1.2637.2.1.1314.1.661
User name used when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppModemConfigPassword 1.3.6.1.4.1.2637.2.1.1314.1.662
Password used when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppModemConfigIPCPEnabled 1.3.6.1.4.1.2637.2.1.1314.1.711
IP Control Protocol Enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLocalIPAddress 1.3.6.1.4.1.2637.2.1.1314.1.712
IP address assigned to the local side of the PPP link
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppModemConfigRemoteIPAddress 1.3.6.1.4.1.2637.2.1.1314.1.713
IP address assigned to the remote peer of the PPP link
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppModemConfigAllowPeerIPAddress 1.3.6.1.4.1.2637.2.1.1314.1.714
Allow remote peer to specify its IP address. Note that if this option is enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigVJEnabled 1.3.6.1.4.1.2637.2.1.1314.1.715
Specifies whether Van Jacobson TCP/IP header compression (as specified in RFC 1144) should be negotiated. Due to bugs in some widely-available implementations, this option specifies whether VJ is enabled or disabled in both directions (compression and decompression).
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigVJSlots 1.3.6.1.4.1.2637.2.1.1314.1.716
Specifies the number of Van Jacobson TCP/IP compression slots to use in each direction (compression and decompression). The default of 16 is strongly recommended, as many widely-available implementations do not interoperate when a different number is negotiated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..32  

pppModemConfigSendDNS 1.3.6.1.4.1.2637.2.1.1314.1.717
Send configured Domain Name Server addresses to the remote peer, according to RFC 1877
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigSendNBNS 1.3.6.1.4.1.2637.2.1.1314.1.718
Send configured NetBIOS Name Server addresses to the remote peer, according to RFC 1877
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigIPCPMaxConfigure 1.3.6.1.4.1.2637.2.1.1314.1.719
Max-Configure value for IPCP negotiation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..20  

pppModemConfigIPCPRestartTimer 1.3.6.1.4.1.2637.2.1.1314.1.720
Time (in milliseconds) between unanswered IPCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppModemConfigPassiveIPCP 1.3.6.1.4.1.2637.2.1.1314.1.721
Don't send an IPCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigPassiveIPCPTimeout 1.3.6.1.4.1.2637.2.1.1314.1.722
The amount of time (in milliseconds) that IPCP will wait for the peer to send a Configure-Request before sending one
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 50..3000  

pppModemConfigDNS1 1.3.6.1.4.1.2637.2.1.1314.1.723
Primary Doman Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppModemConfigDNS2 1.3.6.1.4.1.2637.2.1.1314.1.724
Secondary Doman Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppModemConfigNBNS1 1.3.6.1.4.1.2637.2.1.1314.1.725
Primary NetBIOS Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppModemConfigNBNS2 1.3.6.1.4.1.2637.2.1.1314.1.726
Secondary NetBIOS Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppModemConfigSendLocalIPAddress 1.3.6.1.4.1.2637.2.1.1314.1.727
Specifies when the local IP address should be send to the remote peer in an IPCP Configure-Request frame. If set to Requested, then the option is sent only if the remote peer requests it via a Configure-Nak option.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER never(0), requested(1), always(2)  

pppModemConfigPeerNSStrategy 1.3.6.1.4.1.2637.2.1.1314.1.729
Specifies how DNS/NBNS values suggested by peer will be handled. They will either be Config-Rejected (Reject), Config-Acked (Ack), or ignored and negotiated with Config-Nak with the configured values (Ignore).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ignore(0), ack(1), reject(2)  

pppModemConfigMLPEnabled 1.3.6.1.4.1.2637.2.1.1314.1.811
Multilink protocol (MLP) enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  


pppModemConfigMLPFragmentSize 1.3.6.1.4.1.2637.2.1.1314.1.813
Minimum size of a protocol frame that will be fragmented when transmitted with the Multilink protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1500  

pppModemConfigMLPMaxFragments 1.3.6.1.4.1.2637.2.1.1314.1.814
Maximum number of MLP fragments that a transmit frame will be divided into
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4  

pppModemConfigMLPScaleFragments 1.3.6.1.4.1.2637.2.1.1314.1.815
Should Multilink fragment sizes depend on the relative speed of the links?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigMLPSendNullFragments 1.3.6.1.4.1.2637.2.1.1314.1.816
Should Multilink periodically send null fragments to help the remote peer in discarding dead fragments?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigMLPNullFragmentTimeout 1.3.6.1.4.1.2637.2.1.1314.1.817
The amount of time (in seconds) between null Multilink fragments sent to the remote peer. This value is valid only if this feature is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..3600  

pppModemConfigMLPEndpointDisc 1.3.6.1.4.1.2637.2.1.1314.1.818
Specifies the type of Endpoint Discriminator the CVX should send when negotiating Multilink. Specifying anything but the default (MAC address) can cause complete failures for remote users. Do not change this setting unless instructed to do so by a Nortel Networks employee.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER mACAddress(0), groupNumber(1)  

pppModemConfigMLPGroupNumber 1.3.6.1.4.1.2637.2.1.1314.1.819
Multilink group number. This is valid only when the MLP endpoint discriminator type is set to GroupNumber. This should only be configured when you have been instructed to do so by a Nortel Networks employee.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..999999  

pppModemConfigLogEnabled 1.3.6.1.4.1.2637.2.1.1314.1.911
Specifies whether PPP events should be logged
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogDump 1.3.6.1.4.1.2637.2.1.1314.1.912
[Not implemented yet];
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogSize 1.3.6.1.4.1.2637.2.1.1314.1.920
Number of events in the PPP log buffer. Each log event requires 24 bytes of memory; the default of 128 requires 3K of memory per call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 64..1024  

pppModemConfigLogControlFrames 1.3.6.1.4.1.2637.2.1.1314.1.921
If PPP logging is enabled, specifies whether transmitted and received control frames should be logged. Control frames include LCP and IPCP frames. This should always be on.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogProtocolFrames 1.3.6.1.4.1.2637.2.1.1314.1.922
If PPP logging is enabled, specifies whether transmitted and received protocol frames should be logged. Protocol frames include all IP frames (UDP, TCP, DNS, etc.). This should always be on.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogOptions 1.3.6.1.4.1.2637.2.1.1314.1.923
If PPP logging is enabled, specifies whether PPP negotiation options should be logged. This is particularly useful for diagnosing PPP connection problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogStates 1.3.6.1.4.1.2637.2.1.1314.1.924
If PPP logging is enabled, specifies whether PPP events and state transitions should be logged. This is sometimes useful in diagnosing PPP connection problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogCompression 1.3.6.1.4.1.2637.2.1.1314.1.925
If PPP logging is enabled, specifies whether PPP data compression events should be logged. This is useful in diagnosing compression performance problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogMLP 1.3.6.1.4.1.2637.2.1.1314.1.926
If PPP logging is enabled, specifies whether PPP Multilink events should be logged. This is useful in diagnosing multilink performance problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigLogVJ 1.3.6.1.4.1.2637.2.1.1314.1.927
If PPP logging is enabled, specifies whether PPP VJ header compression events should be logged. This is useful in diagnosing TCP/IP performance problems when VJ header compression is enabled and negotiated.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigCCPEnabled 1.3.6.1.4.1.2637.2.1.1314.1.1011
Specifies whether the Compression Control Protocol (RFC 1962) is enabled. Note that enabling CCP does not automatically cause the CVX to compress frames it transmits; that is controlled by the CompressFrames entry. This configuration was split into two options because many common client implementations of CCP can take over 30 seconds to connect when CCP is disabled. To get these clients to connect quickly, set CCPEnabled to 'true'. To prevent the CVX from actually compressing the data, set CompressFrames to 'false.'
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigCompressFrames 1.3.6.1.4.1.2637.2.1.1314.1.1012
Compress transmitted frames when CCP has been negotiated. Set this to 'false' to prevent the CVX from compressing frames, even when CCP is enabled and negotiated successfully.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigStac3Enabled 1.3.6.1.4.1.2637.2.1.1314.1.1013
Stac check mode 3 (Sequence Number) enabled (RFC 1962)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigStac4Enabled 1.3.6.1.4.1.2637.2.1.1314.1.1014
Stac check mode 4 (Extended Mode) enabled (RFC 1962)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigMPPCEnabled 1.3.6.1.4.1.2637.2.1.1314.1.1015
Microsoft Point-to-Point Compression enabled (RFC 2118)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigStacPerformance 1.3.6.1.4.1.2637.2.1.1314.1.1016
Stac compression performance parameter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

pppModemConfigStacMode 1.3.6.1.4.1.2637.2.1.1314.1.1017
Stac compression performance mode parameter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2  

pppModemConfigIPXCPEnabled 1.3.6.1.4.1.2637.2.1.1314.1.1111
IPX Control Protocol enabled. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppModemConfigIPXNetworkNumber 1.3.6.1.4.1.2637.2.1.1314.1.1112
IPX network number to assign to remote user. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppModemConfigIPXNodeNumber 1.3.6.1.4.1.2637.2.1.1314.1.1113
IPX node number to assign to remote user. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

pppIsdnConfigTable 1.3.6.1.4.1.2637.2.1.1315
PPP ISDN Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppIsdnConfigEntry

pppIsdnConfigEntry 1.3.6.1.4.1.2637.2.1.1315.1
This is the structure of entries in the pppIsdnConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PppIsdnConfigEntry  

pppIsdnConfigPathString 1.3.6.1.4.1.2637.2.1.1315.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

pppIsdnConfigRowStatus 1.3.6.1.4.1.2637.2.1.1315.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pppIsdnConfigKeyValue 1.3.6.1.4.1.2637.2.1.1315.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppIsdnConfigEstablishTimeLimit 1.3.6.1.4.1.2637.2.1.1315.1.111
The amount of time allowed for initial LCP negotiation and authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..300000  

pppIsdnConfigConnectLimit 1.3.6.1.4.1.2637.2.1.1315.1.112
Overall connection time limit (in minutes, 0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppIsdnConfigInactivityLimit 1.3.6.1.4.1.2637.2.1.1315.1.113
Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..120  

pppIsdnConfigMonitorTxActivity 1.3.6.1.4.1.2637.2.1.1315.1.114
If an inactivity limit is set, specifies whether transmitted packets (sent to the remote caller) should be monitored for activity. If set to false, then transmitted data is ignored, and cannot keep the call up.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigMonitorRxActivity 1.3.6.1.4.1.2637.2.1.1315.1.115
If an inactivity limit is set, specifies whether received packets (sent by the remote caller) should be monitored for activity. If set to false, then received data is ignored, and cannot keep the call up.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigCountRIP 1.3.6.1.4.1.2637.2.1.1315.1.116
Specifies whether RIP frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigCountPings 1.3.6.1.4.1.2637.2.1.1315.1.117
Specifies whether ICMP Echo Request and Echo Reply (ping) frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigCountIGMP 1.3.6.1.4.1.2637.2.1.1315.1.118
Specifies whether IGMP frames should count as activity, and thus should reset the inactivity timer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigUseEchoes 1.3.6.1.4.1.2637.2.1.1315.1.211
Send periodic LCP Echo-Request frames to detect dead links
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendID 1.3.6.1.4.1.2637.2.1.1315.1.212
Send LCP Identification frame when LCP negotiation begins
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendTimeRemaining 1.3.6.1.4.1.2637.2.1.1315.1.213
Send periodic LCP Time-Remaining frames to inform remote peer of connection time limit
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendMRU 1.3.6.1.4.1.2637.2.1.1315.1.311
Include the Maximum-Receive-Unit option in transmitted LCP Configure-Request frames, informing remote peer of local MRU value
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendACCM 1.3.6.1.4.1.2637.2.1.1315.1.312
Include the Asynchronous-Control-Character-Map option in transmitted LCP Configure-Request frames, informing remote peer of control characters it must escape when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendMagic 1.3.6.1.4.1.2637.2.1.1315.1.313
Include the Magic-Number option in transmitted LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendPFC 1.3.6.1.4.1.2637.2.1.1315.1.314
Include the Protocol-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendACFC 1.3.6.1.4.1.2637.2.1.1315.1.315
Include the Address-and-Control-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting, allowing the remote peer to omit the Address and Control fields when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendShortSeq 1.3.6.1.4.1.2637.2.1.1315.1.316
Include the Multilink Short Sequence Number option in transmitted LCP Configure-Request frames, allowing peer to transmit MLP frames with short (12-bit) sequence numbers
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendEndpointDisc 1.3.6.1.4.1.2637.2.1.1315.1.317
Include the Multilink Endpoint Discriminator option in transmitted LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAllowMRU 1.3.6.1.4.1.2637.2.1.1315.1.321
Allow the remote peer to specify its Maximum-Receive-Unit value in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAllowACCM 1.3.6.1.4.1.2637.2.1.1315.1.322
Allow the remote peer to include its Asynchronous-Control-Character-Map value in LCP Configure-Request frames its transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAllowMagic 1.3.6.1.4.1.2637.2.1.1315.1.323
Allow the remote peer to include its Magic-Number value in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAllowPFC 1.3.6.1.4.1.2637.2.1.1315.1.324
Allow the remote peer to include the Protocol-Field-Compression option in LCP Configure-Request frames it transmits, allowing the local interface to compress the protocol field when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAllowACFC 1.3.6.1.4.1.2637.2.1.1315.1.325
Allow the remote peer to include the Address-and-Control-Field-Compression option in LCP Configure-Request frames it transmits, allowing the remote peer to compress the protocol field when transmitting, allowing the local interface to omit the Address and Control fields when transmitting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAllowShortSeq 1.3.6.1.4.1.2637.2.1.1315.1.326
Allow the peer to include the Multilink Short Sequence Number option in LCP Configure-Request frames it transmits, instructing the local interface to transmit MLP frames with short (12-bit) sequence numbers
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAllowEndpointDisc 1.3.6.1.4.1.2637.2.1.1315.1.327
Allow the remote peer to include the Multilink Endpoint Discriminator option in LCP Configure-Request frames it transmits
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLCPMaxConfigure 1.3.6.1.4.1.2637.2.1.1315.1.411
Max-Configure value for LCP negotiation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..20  

pppIsdnConfigLCPRestartTimer 1.3.6.1.4.1.2637.2.1.1315.1.412
Time (in milliseconds) between unanswered LCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppIsdnConfigPassiveLCP 1.3.6.1.4.1.2637.2.1.1315.1.413
Don't send an LCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigPassiveLCPTimeout 1.3.6.1.4.1.2637.2.1.1315.1.414
The amount of time (in milliseconds) that LCP will wait for the peer to send a Configure-Request before sending one
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 50..3000  

pppIsdnConfigMinRemoteMRU 1.3.6.1.4.1.2637.2.1.1315.1.511
Minimum acceptable value for Max-Receive-Unit specified by remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppIsdnConfigMinLocalMRU 1.3.6.1.4.1.2637.2.1.1315.1.512
Minimum acceptable value for Max-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1500  

pppIsdnConfigDesiredLocalMRU 1.3.6.1.4.1.2637.2.1.1315.1.513
Desired value for Max-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1536  

pppIsdnConfigTransmitACCM 1.3.6.1.4.1.2637.2.1.1315.1.514
Required bits in transmit Async-Character-Control-Mask (specified in remote peer's Configure-Request)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppIsdnConfigReceiveACCM 1.3.6.1.4.1.2637.2.1.1315.1.515
Required bits in receive Async-Character-Control-Mask (specified in local interface's Configure-Request)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppIsdnConfigMinRemoteMRRU 1.3.6.1.4.1.2637.2.1.1315.1.516
Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer. If peer will not negotiate an MRRU this size or greater, then multilink will not be allowed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppIsdnConfigDesiredRemoteMRRU 1.3.6.1.4.1.2637.2.1.1315.1.517
Desired value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppIsdnConfigMinLocalMRRU 1.3.6.1.4.1.2637.2.1.1315.1.518
Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppIsdnConfigDesiredLocalMRRU 1.3.6.1.4.1.2637.2.1.1315.1.519
Desired value for Multilink Max-Reconstructed-Receive-Unit for local interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 576..1518  

pppIsdnConfigLCPEchoRetries 1.3.6.1.4.1.2637.2.1.1315.1.520
The number of unanswered LCP Echo-Requests transmitted before the link is declared dead
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppIsdnConfigLCPEchoTimeout 1.3.6.1.4.1.2637.2.1.1315.1.521
Time (in milliseconds) between answered LCP Echo-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 30000..600000  

pppIsdnConfigLCPEchoErrorTimeout 1.3.6.1.4.1.2637.2.1.1315.1.522
Time (in milliseconds) between unanswered LCP Echo-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..60000  

pppIsdnConfigTimeRemainingInterval 1.3.6.1.4.1.2637.2.1.1315.1.523
Time (in milliseconds) between transmitted Time-Remaining frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 300000..1200000  

pppIsdnConfigIDText 1.3.6.1.4.1.2637.2.1.1315.1.524
Text sent in LCP Identification frame transmitted when LCP negotiation begins
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppIsdnConfigAuthRequire 1.3.6.1.4.1.2637.2.1.1315.1.611
Require authentication of remote peer
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAuthAllow 1.3.6.1.4.1.2637.2.1.1315.1.612
Allow remote peer to require authentication of local interface
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigAuthServerProtocol1 1.3.6.1.4.1.2637.2.1.1315.1.620
1st preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigAuthServerProtocol2 1.3.6.1.4.1.2637.2.1.1315.1.621
2nd preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigAuthServerProtocol3 1.3.6.1.4.1.2637.2.1.1315.1.622
3rd preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigAuthServerProtocol4 1.3.6.1.4.1.2637.2.1.1315.1.623
4th preference for authentication protocol to use when authenticating the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigAuthClientProtocol1 1.3.6.1.4.1.2637.2.1.1315.1.631
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigAuthClientProtocol2 1.3.6.1.4.1.2637.2.1.1315.1.632
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigAuthClientProtocol3 1.3.6.1.4.1.2637.2.1.1315.1.633
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigAuthClientProtocol4 1.3.6.1.4.1.2637.2.1.1315.1.634
A protocol that is acceptable for use when authenticating with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), chap(49699), pap(49187)  

pppIsdnConfigPAPClientRetries 1.3.6.1.4.1.2637.2.1.1315.1.641
Number of retries Password Authentication Protocol client will make when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppIsdnConfigPAPClientTimeout 1.3.6.1.4.1.2637.2.1.1315.1.642
Time between transmitted Password Authentication Protocol Authenticate-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppIsdnConfigPAPServerRetries 1.3.6.1.4.1.2637.2.1.1315.1.643
Number of authentication attempts granted to the remote peer when using the Password Authentication Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppIsdnConfigPAPServerTimeout 1.3.6.1.4.1.2637.2.1.1315.1.644
Not sure this applies...
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppIsdnConfigCHAPClientRetries 1.3.6.1.4.1.2637.2.1.1315.1.651
Number of retries the CHAP client will make when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppIsdnConfigCHAPClientTimeout 1.3.6.1.4.1.2637.2.1.1315.1.652
Time between transmitted CHAP Response frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppIsdnConfigCHAPServerRetries 1.3.6.1.4.1.2637.2.1.1315.1.653
Number of authentication attempts granted to the remote peer when using CHAP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppIsdnConfigCHAPServerChallenges 1.3.6.1.4.1.2637.2.1.1315.1.654
Number of unanswered Challenge frames sent to the remote peer when using CHAP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

pppIsdnConfigCHAPServerTimeout 1.3.6.1.4.1.2637.2.1.1315.1.655
Time between transmitted CHAP Challenge frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppIsdnConfigCHAPValueLength 1.3.6.1.4.1.2637.2.1.1315.1.656
The length (in octets) of the CHAP Value sent to the remote user in CHAP Challenge frames. This number must be a factor of 4. Note that some RADIUS servers support only Challenge Values of 16 bytes, so this length should not be changed unless it is supported by the RADIUS server in use.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 16..64  

pppIsdnConfigAuthFailureRenegotiatesLCP 1.3.6.1.4.1.2637.2.1.1315.1.657
Determines what occurs after an authentication failure. If true, and if more than one authentication protocol is enabled (in AuthServerProtocol1, 2, etc.), then LCP is renegotiated with the second authentication protocol.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigUserName 1.3.6.1.4.1.2637.2.1.1315.1.661
User name used when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppIsdnConfigPassword 1.3.6.1.4.1.2637.2.1.1315.1.662
Password used when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

pppIsdnConfigIPCPEnabled 1.3.6.1.4.1.2637.2.1.1315.1.711
IP Control Protocol Enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLocalIPAddress 1.3.6.1.4.1.2637.2.1.1315.1.712
IP address assigned to the local side of the PPP link
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppIsdnConfigRemoteIPAddress 1.3.6.1.4.1.2637.2.1.1315.1.713
IP address assigned to the remote peer of the PPP link
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppIsdnConfigAllowPeerIPAddress 1.3.6.1.4.1.2637.2.1.1315.1.714
Allow remote peer to specify its IP address. Note that if this option is enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigVJEnabled 1.3.6.1.4.1.2637.2.1.1315.1.715
Specifies whether Van Jacobson TCP/IP header compression (as specified in RFC 1144) should be negotiated. Due to bugs in some widely-available implementations, this option specifies whether VJ is enabled or disabled in both directions (compression and decompression).
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigVJSlots 1.3.6.1.4.1.2637.2.1.1315.1.716
Specifies the number of Van Jacobson TCP/IP compression slots to use in each direction (compression and decompression). The default of 16 is strongly recommended, as many widely-available implementations do not interoperate when a different number is negotiated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..32  

pppIsdnConfigSendDNS 1.3.6.1.4.1.2637.2.1.1315.1.717
Send configured Domain Name Server addresses to the remote peer, according to RFC 1877
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigSendNBNS 1.3.6.1.4.1.2637.2.1.1315.1.718
Send configured NetBIOS Name Server addresses to the remote peer, according to RFC 1877
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigIPCPMaxConfigure 1.3.6.1.4.1.2637.2.1.1315.1.719
Max-Configure value for IPCP negotiation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..20  

pppIsdnConfigIPCPRestartTimer 1.3.6.1.4.1.2637.2.1.1315.1.720
Time (in milliseconds) between unanswered IPCP Configure-Request frames
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..10000  

pppIsdnConfigPassiveIPCP 1.3.6.1.4.1.2637.2.1.1315.1.721
Don't send an IPCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigPassiveIPCPTimeout 1.3.6.1.4.1.2637.2.1.1315.1.722
The amount of time (in milliseconds) that IPCP will wait for the peer to send a Configure-Request before sending one
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 50..3000  

pppIsdnConfigDNS1 1.3.6.1.4.1.2637.2.1.1315.1.723
Primary Doman Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppIsdnConfigDNS2 1.3.6.1.4.1.2637.2.1.1315.1.724
Secondary Doman Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppIsdnConfigNBNS1 1.3.6.1.4.1.2637.2.1.1315.1.725
Primary NetBIOS Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppIsdnConfigNBNS2 1.3.6.1.4.1.2637.2.1.1315.1.726
Secondary NetBIOS Name Server address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pppIsdnConfigSendLocalIPAddress 1.3.6.1.4.1.2637.2.1.1315.1.727
Specifies when the local IP address should be send to the remote peer in an IPCP Configure-Request frame. If set to Requested, then the option is sent only if the remote peer requests it via a Configure-Nak option.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER never(0), requested(1), always(2)  

pppIsdnConfigPeerNSStrategy 1.3.6.1.4.1.2637.2.1.1315.1.729
Specifies how DNS/NBNS values suggested by peer will be handled. They will either be Config-Rejected (Reject), Config-Acked (Ack), or ignored and negotiated with Config-Nak with the configured values (Ignore).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ignore(0), ack(1), reject(2)  

pppIsdnConfigMLPEnabled 1.3.6.1.4.1.2637.2.1.1315.1.811
Multilink protocol (MLP) enabled
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  


pppIsdnConfigMLPFragmentSize 1.3.6.1.4.1.2637.2.1.1315.1.813
Minimum size of a protocol frame that will be fragmented when transmitted with the Multilink protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1500  

pppIsdnConfigMLPMaxFragments 1.3.6.1.4.1.2637.2.1.1315.1.814
Maximum number of MLP fragments that a transmit frame will be divided into
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4  

pppIsdnConfigMLPScaleFragments 1.3.6.1.4.1.2637.2.1.1315.1.815
Should Multilink fragment sizes depend on the relative speed of the links?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigMLPSendNullFragments 1.3.6.1.4.1.2637.2.1.1315.1.816
Should Multilink periodically send null fragments to help the remote peer in discarding dead fragments?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigMLPNullFragmentTimeout 1.3.6.1.4.1.2637.2.1.1315.1.817
The amount of time (in seconds) between null Multilink fragments sent to the remote peer. This value is valid only if this feature is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..3600  

pppIsdnConfigMLPEndpointDisc 1.3.6.1.4.1.2637.2.1.1315.1.818
Specifies the type of Endpoint Discriminator the CVX should send when negotiating Multilink. Specifying anything but the default (MAC address) can cause complete failures for remote users. Do not change this setting unless instructed to do so by a Nortel Networks employee.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER mACAddress(0), groupNumber(1)  

pppIsdnConfigMLPGroupNumber 1.3.6.1.4.1.2637.2.1.1315.1.819
Multilink group number. This is valid only when the MLP endpoint discriminator type is set to GroupNumber. This should only be configured when you have been instructed to do so by a Nortel Networks employee.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..999999  

pppIsdnConfigLogEnabled 1.3.6.1.4.1.2637.2.1.1315.1.911
Specifies whether PPP events should be logged
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogDump 1.3.6.1.4.1.2637.2.1.1315.1.912
[Not implemented yet];
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogSize 1.3.6.1.4.1.2637.2.1.1315.1.920
Number of events in the PPP log buffer. Each log event requires 24 bytes of memory; the default of 128 requires 3K of memory per call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 64..1024  

pppIsdnConfigLogControlFrames 1.3.6.1.4.1.2637.2.1.1315.1.921
If PPP logging is enabled, specifies whether transmitted and received control frames should be logged. Control frames include LCP and IPCP frames. This should always be on.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogProtocolFrames 1.3.6.1.4.1.2637.2.1.1315.1.922
If PPP logging is enabled, specifies whether transmitted and received protocol frames should be logged. Protocol frames include all IP frames (UDP, TCP, DNS, etc.). This should always be on.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogOptions 1.3.6.1.4.1.2637.2.1.1315.1.923
If PPP logging is enabled, specifies whether PPP negotiation options should be logged. This is particularly useful for diagnosing PPP connection problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogStates 1.3.6.1.4.1.2637.2.1.1315.1.924
If PPP logging is enabled, specifies whether PPP events and state transitions should be logged. This is sometimes useful in diagnosing PPP connection problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogCompression 1.3.6.1.4.1.2637.2.1.1315.1.925
If PPP logging is enabled, specifies whether PPP data compression events should be logged. This is useful in diagnosing compression performance problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogMLP 1.3.6.1.4.1.2637.2.1.1315.1.926
If PPP logging is enabled, specifies whether PPP Multilink events should be logged. This is useful in diagnosing multilink performance problems.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigLogVJ 1.3.6.1.4.1.2637.2.1.1315.1.927
If PPP logging is enabled, specifies whether PPP VJ header compression events should be logged. This is useful in diagnosing TCP/IP performance problems when VJ header compression is enabled and negotiated.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigCCPEnabled 1.3.6.1.4.1.2637.2.1.1315.1.1011
Specifies whether the Compression Control Protocol (RFC 1962) is enabled. Note that enabling CCP does not automatically cause the CVX to compress frames it transmits; that is controlled by the CompressFrames entry. This configuration was split into two options because many common client implementations of CCP can take over 30 seconds to connect when CCP is disabled. To get these clients to connect quickly, set CCPEnabled to 'true'. To prevent the CVX from actually compressing the data, set CompressFrames to 'false.'
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigCompressFrames 1.3.6.1.4.1.2637.2.1.1315.1.1012
Compress transmitted frames when CCP has been negotiated. Set this to 'false' to prevent the CVX from compressing frames, even when CCP is enabled and negotiated successfully.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigStac3Enabled 1.3.6.1.4.1.2637.2.1.1315.1.1013
Stac check mode 3 (Sequence Number) enabled (RFC 1962)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigStac4Enabled 1.3.6.1.4.1.2637.2.1.1315.1.1014
Stac check mode 4 (Extended Mode) enabled (RFC 1962)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigMPPCEnabled 1.3.6.1.4.1.2637.2.1.1315.1.1015
Microsoft Point-to-Point Compression enabled (RFC 2118)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigStacPerformance 1.3.6.1.4.1.2637.2.1.1315.1.1016
Stac compression performance parameter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

pppIsdnConfigStacMode 1.3.6.1.4.1.2637.2.1.1315.1.1017
Stac compression performance mode parameter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2  

pppIsdnConfigIPXCPEnabled 1.3.6.1.4.1.2637.2.1.1315.1.1111
IPX Control Protocol enabled. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppIsdnConfigIPXNetworkNumber 1.3.6.1.4.1.2637.2.1.1315.1.1112
IPX network number to assign to remote user. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppIsdnConfigIPXNodeNumber 1.3.6.1.4.1.2637.2.1.1315.1.1113
IPX node number to assign to remote user. For use with DVS tunnels only.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

cLITable 1.3.6.1.4.1.2637.2.1.2800
CLI Configuration Parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLIEntry

cLIEntry 1.3.6.1.4.1.2637.2.1.2800.1
This is the structure of entries in the cLITable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLIEntry  

cLIPathString 1.3.6.1.4.1.2637.2.1.2800.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cLIRowStatus 1.3.6.1.4.1.2637.2.1.2800.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLIKeyValue 1.3.6.1.4.1.2637.2.1.2800.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

cLIPrompt 1.3.6.1.4.1.2637.2.1.2800.1.11
CLI prompt string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

cLIFEPLog 1.3.6.1.4.1.2637.2.1.2800.1.12
If TRUE, the FEP will send its log events to the Event LOG.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

cLISyncLog 1.3.6.1.4.1.2637.2.1.2800.1.13
If TRUE, messages regarding master-slave SCC file syncing will be shown.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

cLIWarningTemp 1.3.6.1.4.1.2637.2.1.2800.1.14
If the temperature (in degrees C) of any card crosses this value, a warning alarm will be sent.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 20..200  

cLIHoldTempShutdownCardsInReset 1.3.6.1.4.1.2637.2.1.2800.1.15
Cards shut down due to temperature are held down until card up is typed
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

cLIShutdownTemperature 1.3.6.1.4.1.2637.2.1.2800.1.16
If the temperature (in degrees C) of any card crosses this value, it will be shut down
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 20..200  

oosTable 1.3.6.1.4.1.2637.2.1.198
Out-Of-Service Class.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OosEntry

oosEntry 1.3.6.1.4.1.2637.2.1.198.1
This is the structure of entries in the oosTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  OosEntry  

oosPathString 1.3.6.1.4.1.2637.2.1.198.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

oosRowStatus 1.3.6.1.4.1.2637.2.1.198.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

oosKeyValue 1.3.6.1.4.1.2637.2.1.198.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

oosOosValue 1.3.6.1.4.1.2637.2.1.198.1.11
Current oos value for this node
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

metaContainerTable 1.3.6.1.4.1.2637.2.1.1
Meta Language Class.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaContainerEntry

metaContainerEntry 1.3.6.1.4.1.2637.2.1.1.1
This is the structure of entries in the metaContainerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaContainerEntry  

metaContainerPathString 1.3.6.1.4.1.2637.2.1.1.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

metaContainerRowStatus 1.3.6.1.4.1.2637.2.1.1.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

metaContainerKeyValue 1.3.6.1.4.1.2637.2.1.1.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

metaContainerCmlid 1.3.6.1.4.1.2637.2.1.1.1.4
The CML type identifier of the container.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

metaContainerCmlname 1.3.6.1.4.1.2637.2.1.1.1.5
The CML type name of the container. This is the text version that means the same thing as cmlid.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

coredumpConfigTable 1.3.6.1.4.1.2637.2.1.13
Configuration for the CVX's coredump facility
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoredumpConfigEntry

coredumpConfigEntry 1.3.6.1.4.1.2637.2.1.13.1
This is the structure of entries in the coredumpConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoredumpConfigEntry  

coredumpConfigPathString 1.3.6.1.4.1.2637.2.1.13.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

coredumpConfigRowStatus 1.3.6.1.4.1.2637.2.1.13.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

coredumpConfigKeyValue 1.3.6.1.4.1.2637.2.1.13.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

coredumpConfigDumpSCC 1.3.6.1.4.1.2637.2.1.13.1.11
Perform coredumps on SCC crashes (FEP only)
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

coredumpConfigDumpMAC 1.3.6.1.4.1.2637.2.1.13.1.12
Perform coredumps on MAC crashes, including IOP crashes
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

coredumpConfigDumpDAC 1.3.6.1.4.1.2637.2.1.13.1.13
Perform coredumps on DAC crashes, including SP crashes
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

coredumpConfigOutputMode 1.3.6.1.4.1.2637.2.1.13.1.14
Method for storing dumps - overwrite previous or store subsequent
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER overwrite(0), cumulative(1)  

coredumpConfigOutputDrive 1.3.6.1.4.1.2637.2.1.13.1.15
Drive used to store coredumps
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER c(0), d(1)  

eventConfigTable 1.3.6.1.4.1.2637.2.1.14
Configuration for the CVX's Event Log facility
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EventConfigEntry

eventConfigEntry 1.3.6.1.4.1.2637.2.1.14.1
This is the structure of entries in the eventConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EventConfigEntry  

eventConfigPathString 1.3.6.1.4.1.2637.2.1.14.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

eventConfigRowStatus 1.3.6.1.4.1.2637.2.1.14.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eventConfigKeyValue 1.3.6.1.4.1.2637.2.1.14.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

eventConfigDefaultLogLevel 1.3.6.1.4.1.2637.2.1.14.1.11
Minimum CVX Event Log severity level to store in Run-Time Event Log)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

shellConfigTable 1.3.6.1.4.1.2637.2.1.1481
MAM Card Shell Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ShellConfigEntry

shellConfigEntry 1.3.6.1.4.1.2637.2.1.1481.1
This is the structure of entries in the shellConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ShellConfigEntry  

shellConfigPathString 1.3.6.1.4.1.2637.2.1.1481.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

shellConfigRowStatus 1.3.6.1.4.1.2637.2.1.1481.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

shellConfigKeyValue 1.3.6.1.4.1.2637.2.1.1481.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

shellConfigConnectTimeout 1.3.6.1.4.1.2637.2.1.1481.1.111
The time allowed for the remote user to authenticate via the shell
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10000..300000  

shellConfigRetryCount 1.3.6.1.4.1.2637.2.1.1481.1.112
The number of authentication attempts allowed in the shell
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

shellConfigEchoName 1.3.6.1.4.1.2637.2.1.1481.1.211
Echo the characters in the user name as the remote user types them
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigEchoPassword 1.3.6.1.4.1.2637.2.1.1481.1.212
Echo the characters in the password as the remote user types them
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigEchoCommands 1.3.6.1.4.1.2637.2.1.1481.1.213
Echo the characters in the shell commands as the remote user types them
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigCtrlDAborts 1.3.6.1.4.1.2637.2.1.1481.1.215
Reception of a Control-D character from the remote user causes the shell to be aborted and the line to be hung up
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigShellCommand 1.3.6.1.4.1.2637.2.1.1481.1.311
Once the user has authenticated in the shell, allow them to enter the 'shell' command to initiate a system shell/command session
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigPPPCommand 1.3.6.1.4.1.2637.2.1.1481.1.312
Once the user has authenticated in the shell, allow them to enter the 'PPP' command to initiate a PPP session
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigTelnetCommand 1.3.6.1.4.1.2637.2.1.1481.1.313
Once the user has authenticated in the shell, allow them to enter the 'telnet' command to initiate a telnet session with a remote host
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigRloginCommand 1.3.6.1.4.1.2637.2.1.1481.1.314
Once the user has authenticated in the shell, allow them to enter the 'rlogin' command to initiate an rlogin session with a remote host
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

shellConfigBannerText 1.3.6.1.4.1.2637.2.1.1481.1.411
Text sent to the remote user at the start of a shell session
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

shellConfigExtraLoginText 1.3.6.1.4.1.2637.2.1.1481.1.412
Extra text to send to the remote user immediately after the banner.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

shellConfigNamePrompt 1.3.6.1.4.1.2637.2.1.1481.1.413
The prompt sent to the remote user when asking for a user name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

shellConfigPasswordPrompt 1.3.6.1.4.1.2637.2.1.1481.1.414
The prompt sent to the remote user when asking for a password
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

shellConfigWaitText 1.3.6.1.4.1.2637.2.1.1481.1.415
Text sent to the remote user to indicate that authentication is underway
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

shellConfigAuthenticatedText 1.3.6.1.4.1.2637.2.1.1481.1.416
Text sent to the remote user when authentication succeeds
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

shellConfigFailureText 1.3.6.1.4.1.2637.2.1.1481.1.417
Text sent to the remote user when an authentication attempt fails. The user may or may not have another authentication attempt.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

shellConfigCommandPrompt 1.3.6.1.4.1.2637.2.1.1481.1.418
The text sent to prompt the remote user to enter a shell command
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

shellConfigHangupText 1.3.6.1.4.1.2637.2.1.1481.1.419
The text sent to indicate that authentication has failed, and that the line will be hung up
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

shellConfigTimeoutText 1.3.6.1.4.1.2637.2.1.1481.1.420
The text sent to indicate that authentication has taken too long, and that the line will be hung up
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

sessionConfigTable 1.3.6.1.4.1.2637.2.1.250
Session Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SessionConfigEntry

sessionConfigEntry 1.3.6.1.4.1.2637.2.1.250.1
This is the structure of entries in the sessionConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SessionConfigEntry  

sessionConfigPathString 1.3.6.1.4.1.2637.2.1.250.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

sessionConfigRowStatus 1.3.6.1.4.1.2637.2.1.250.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sessionConfigKeyValue 1.3.6.1.4.1.2637.2.1.250.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

sessionConfigDefaultVpopEnable 1.3.6.1.4.1.2637.2.1.250.1.11
If DefaultVpopEnable is false, and no VPOP has been selected at the completion of call setup, the session will be terminated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER true(1), false(2)  

sessionConfigPreAuth 1.3.6.1.4.1.2637.2.1.250.1.12
This variable defines whether called number authentication will be required, and if so, which method of authentication should be used.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), radius(2), inc(3)  

sessionConfigPreAuthPassword 1.3.6.1.4.1.2637.2.1.250.1.13
The value to be used for the called number authentication request. This value will be ignored unless radius PreAuth is specified.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..68)  

sessionConfigPreAuthTimeout 1.3.6.1.4.1.2637.2.1.250.1.14
The maximum number of seconds allowed for called number authentication to complete.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..30  

sessionConfigPreAuthTimeoutAction 1.3.6.1.4.1.2637.2.1.250.1.15
The action to take when the pre-auth times out without authentication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER accept(1), reject(2)  

sessionConfigCheckpointTime 1.3.6.1.4.1.2637.2.1.250.1.16
The number of minutes between accounting checkpoint records. 0 disables checkpoint records.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..15  

sessionConfigTerminateEnable 1.3.6.1.4.1.2637.2.1.250.1.17
Controls whether or not the session can be terminated by a remote NMS.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sessionConfigTerminateSecret 1.3.6.1.4.1.2637.2.1.250.1.18
Contains the secret string that is used to authenticate the session termination request.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionConfigLogEnable 1.3.6.1.4.1.2637.2.1.250.1.19
enables logging of session events on a per session basis.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER true(1), false(2)  

sessionConfigPreAuthAAAGroup 1.3.6.1.4.1.2637.2.1.250.1.20
The key of the AAA server group to use for authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

sessionConfigDS0DiscTimeOut 1.3.6.1.4.1.2637.2.1.250.1.21
The number of seconds to wait for the DS0 component on the DAC to respond with a disconnected message before timing out.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..900  

sessionConfigAcctReportFailedSessions 1.3.6.1.4.1.2637.2.1.250.1.22
If true, enables accounting stop records for sessions where accounting start was not reported.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER true(1), false(2)  

signalingConfigTable 1.3.6.1.4.1.2637.2.1.253
Session Signalling Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SignalingConfigEntry

signalingConfigEntry 1.3.6.1.4.1.2637.2.1.253.1
This is the structure of entries in the signalingConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SignalingConfigEntry  

signalingConfigPathString 1.3.6.1.4.1.2637.2.1.253.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

signalingConfigRowStatus 1.3.6.1.4.1.2637.2.1.253.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

signalingConfigKeyValue 1.3.6.1.4.1.2637.2.1.253.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

signalingConfigSs7Mode 1.3.6.1.4.1.2637.2.1.253.1.11
This field activates internet thruway support
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

signalingConfigDsmccTimeout 1.3.6.1.4.1.2637.2.1.253.1.12
The timeout value for User-Network Session Signalling messages
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1000..100000  

signalingConfigDsmccHoldTime 1.3.6.1.4.1.2637.2.1.253.1.13
The length of time a local copy of Response messages will be retained for retransmission.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

signalingConfigDsmccRetries 1.3.6.1.4.1.2637.2.1.253.1.14
The number of resends for any User-to-Network Session Signalling message.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..50  

signalingConfigConfigPPP 1.3.6.1.4.1.2637.2.1.253.1.15
Determines if ppp configuration is allowed to be changed by the CVX SS7 network controller as part of the call setup process.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allowed(1), notAllowed(2)  

signalingConfigDebugMode 1.3.6.1.4.1.2637.2.1.253.1.16
Enables a mode where every other DS1 is unavailable, and a phantom call is generated for every incoming call on the unavailable DS1. This allows testing to take place by looping each DS1 to the adjacent DS1, and generating call setups using the SNEM or a similar tool.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

signalingConfigSs7Gateway 1.3.6.1.4.1.2637.2.1.253.1.17
Specifies the type of signaling gateway is used to interface to the ss7 network.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ssg(1), softSwitch(2), ipdc(3)  

ipdcConfigTable 1.3.6.1.4.1.2637.2.1.254
IPDC configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpdcConfigEntry

ipdcConfigEntry 1.3.6.1.4.1.2637.2.1.254.1
This is the structure of entries in the ipdcConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpdcConfigEntry  

ipdcConfigPathString 1.3.6.1.4.1.2637.2.1.254.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipdcConfigRowStatus 1.3.6.1.4.1.2637.2.1.254.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipdcConfigKeyValue 1.3.6.1.4.1.2637.2.1.254.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipdcConfigPrimarySwitchIpAddr 1.3.6.1.4.1.2637.2.1.254.1.11
IP address of the primary soft switch.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipdcConfigPrimarySwitchPort 1.3.6.1.4.1.2637.2.1.254.1.12
TCP port on the primary soft switch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipdcConfigSecondarySwitchIpAddr 1.3.6.1.4.1.2637.2.1.254.1.13
IP address of the secondary soft switch.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipdcConfigSecondarySwitchPort 1.3.6.1.4.1.2637.2.1.254.1.14
TCP port on the secondary soft switch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipdcConfigBayNumber 1.3.6.1.4.1.2637.2.1.254.1.15
Bay number (8 bytes, alphanumeric).
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..8)  

ipdcConfigSystemType 1.3.6.1.4.1.2637.2.1.254.1.16
System type.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..24)  

ipdcConfigSystemID 1.3.6.1.4.1.2637.2.1.254.1.17
Media gateway identifier.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipdcConfigTxTone 1.3.6.1.4.1.2637.2.1.254.1.18
Specifies the tone frequency generated during continuity test.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER high(0), low(1)  

ipdcConfigRxTone 1.3.6.1.4.1.2637.2.1.254.1.19
Specifies the tone frequency detected during continuity test.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER high(0), low(1)  

softswitchConfigTable 1.3.6.1.4.1.2637.2.1.255
Softswitch configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SoftswitchConfigEntry

softswitchConfigEntry 1.3.6.1.4.1.2637.2.1.255.1
This is the structure of entries in the softswitchConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SoftswitchConfigEntry  

softswitchConfigPathString 1.3.6.1.4.1.2637.2.1.255.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

softswitchConfigRowStatus 1.3.6.1.4.1.2637.2.1.255.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

softswitchConfigKeyValue 1.3.6.1.4.1.2637.2.1.255.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

softswitchConfigSoftswitchEnable 1.3.6.1.4.1.2637.2.1.255.1.11
When the simulator is enabled, the CVX will simulate a Soft Switch, and the IPDC client will not operate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER true(1), false(2)  

softswitchConfigIpAddr 1.3.6.1.4.1.2637.2.1.255.1.12
IP address of the simulated soft switch.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

softswitchConfigPort 1.3.6.1.4.1.2637.2.1.255.1.13
TCP port on the simulated soft switch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

sessionTableFormatTable 1.3.6.1.4.1.2637.2.1.251
Session Table Format Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SessionTableFormatEntry

sessionTableFormatEntry 1.3.6.1.4.1.2637.2.1.251.1
This is the structure of entries in the sessionTableFormatTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SessionTableFormatEntry  

sessionTableFormatPathString 1.3.6.1.4.1.2637.2.1.251.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

sessionTableFormatRowStatus 1.3.6.1.4.1.2637.2.1.251.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sessionTableFormatKeyValue 1.3.6.1.4.1.2637.2.1.251.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

sessionTableFormatUseDefault 1.3.6.1.4.1.2637.2.1.251.1.11
When this variable is set to yes, the default session table will be used, and the table format parameters will be ignored.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER custom(1), default(2), counters(3), hardware(4), ip(5), postMortem(6), hub(7)  

sessionTableFormatHeading1 1.3.6.1.4.1.2637.2.1.251.1.12
The text used as the heading for column 1 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth1 1.3.6.1.4.1.2637.2.1.251.1.13
The number of characters in column 1 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam1 1.3.6.1.4.1.2637.2.1.251.1.14
The member of the session_status structure to be displayed in column 1 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading2 1.3.6.1.4.1.2637.2.1.251.1.15
The text used as the heading for column 2 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth2 1.3.6.1.4.1.2637.2.1.251.1.16
The number of characters in column 2 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam2 1.3.6.1.4.1.2637.2.1.251.1.17
The member of the session_status structure to be displayed in column 2 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading3 1.3.6.1.4.1.2637.2.1.251.1.18
The text used as the heading for column 3 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth3 1.3.6.1.4.1.2637.2.1.251.1.19
The number of characters in column 3 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam3 1.3.6.1.4.1.2637.2.1.251.1.20
The member of the session_status structure to be displayed in column 3 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading4 1.3.6.1.4.1.2637.2.1.251.1.21
The text used as the heading for column 4 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth4 1.3.6.1.4.1.2637.2.1.251.1.22
The number of characters in column 4 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam4 1.3.6.1.4.1.2637.2.1.251.1.23
The member of the session_status structure to be displayed in column 4 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading5 1.3.6.1.4.1.2637.2.1.251.1.24
The text used as the heading for column 5 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth5 1.3.6.1.4.1.2637.2.1.251.1.25
The number of characters in column 5 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam5 1.3.6.1.4.1.2637.2.1.251.1.26
The member of the session_status structure to be displayed in column 5 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading6 1.3.6.1.4.1.2637.2.1.251.1.27
The text used as the heading for column 6 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth6 1.3.6.1.4.1.2637.2.1.251.1.28
The number of characters in column 6 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam6 1.3.6.1.4.1.2637.2.1.251.1.29
The member of the session_status structure to be displayed in column 6 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading7 1.3.6.1.4.1.2637.2.1.251.1.30
The text used as the heading for column 7 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth7 1.3.6.1.4.1.2637.2.1.251.1.31
The number of characters in column 7 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam7 1.3.6.1.4.1.2637.2.1.251.1.32
The member of the session_status structure to be displayed in column 7 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading8 1.3.6.1.4.1.2637.2.1.251.1.33
The text used as the heading for column 8 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth8 1.3.6.1.4.1.2637.2.1.251.1.34
The number of characters in column 8 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam8 1.3.6.1.4.1.2637.2.1.251.1.35
The member of the session_status structure to be displayed in column 8 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading9 1.3.6.1.4.1.2637.2.1.251.1.36
The text used as the heading for column 9 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth9 1.3.6.1.4.1.2637.2.1.251.1.37
The number of characters in column 9 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam9 1.3.6.1.4.1.2637.2.1.251.1.38
The member of the session_status structure to be displayed in column 9 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

sessionTableFormatHeading10 1.3.6.1.4.1.2637.2.1.251.1.39
The text used as the heading for column 10 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sessionTableFormatWidth10 1.3.6.1.4.1.2637.2.1.251.1.40
The number of characters in column 10 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..31  

sessionTableFormatParam10 1.3.6.1.4.1.2637.2.1.251.1.41
The member of the session_status structure to be displayed in column 10 of the session table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), index(1), sessionID(2), state(3), permanentFlag(10), vpop(11), name(12), remoteIP(13), remoteIPMask(14), localIP(15), localIPMask(16), linkService(17), serviceMode(18), startTime(19), stopTime(20), timeOfModemSync(21), timeOfService(22), terminatingComponent(23), terminationCause(24), lastComponent(25), layer1Slot(26), layer2Slot(27), calledNumber(28), callingNumber(29), originateMode(30), octetsIn(31), octetsOut(32), packetsIn(33), packetsOut(34), multiLinkId(35), port(36), timeslot(37), linkCount(38), txStartDataRate(39), rxStartDataRate(40), txEndDataRate(41), rxEndDataRate(42), txMinDataRate(43), rxMinDataRate(44), txMaxDataRate(45), rxMaxDataRate(46), iop(47), dmm(48), pack(49), device(50), tdmStream(51), tdmTimeSlot(52), terminationReason(53), duration(54), durationHMS(55), ss7SessionId(56), modemNumber(57), tunnelType(58), tunnelMediumType(59), tunnelServerAddress(60), callClass(61), tandemPort(62), tandemTimeslot(63), callClassArray(64), callClassLen(65), actualAuthMethod(66), modemModulation(67), modemErrorCorrection(68), modemDataCompression(69), modemTxBlocks(70), modemRetransmits(71), modemSNR(72), modemLocalRetrains(73), modemRemoteRetrains(74), modemLocalRenegotiations(75), modemRemoteRenegotiations(76), modemReceiveLineLevel(77), remoteIPXNetwork(78), remoteIPXNode(79), cleartcpRemoteIP(80), cleartcpRemotePort(81), tunnelId(82), linkId(83)  

policyConfigTable 1.3.6.1.4.1.2637.2.1.252
Session Policy Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PolicyConfigEntry

policyConfigEntry 1.3.6.1.4.1.2637.2.1.252.1
This is the structure of entries in the policyConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PolicyConfigEntry  

policyConfigPathString 1.3.6.1.4.1.2637.2.1.252.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

policyConfigRowStatus 1.3.6.1.4.1.2637.2.1.252.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

policyConfigKeyValue 1.3.6.1.4.1.2637.2.1.252.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

policyConfigModemAllocationPolicy 1.3.6.1.4.1.2637.2.1.252.1.11
Policy for allocating next modem; Combined Policy is the best choice.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER loadBalance(1), bestModem(2), testMode(3), combined(4)  

policyConfigModemReviveTimeout 1.3.6.1.4.1.2637.2.1.252.1.12
The time (in minutes) between periodic attempts to download a code image to non-responsive or non-functional modem packages, and to attempt to re-initialize non-responsive modems (0 = never).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..240  

policyConfigModemFailCount 1.3.6.1.4.1.2637.2.1.252.1.13
The number of failed connections a modem can have in a sampling period (specified elsewhere) before it will be taken out of service. For example, if this number is set to 8, and the sample count is set to 16, then a modem that fai ls more than 8 out of its last 16 connection attempts will be taken out of service. 0 indicates that the modem will never be taken out of service for this reason.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..31  

policyConfigModemFailSample 1.3.6.1.4.1.2637.2.1.252.1.14
The number of connections sampled to determine whether a modem should be taken out of service. If a modem fails more times in this sampling period than allowed, then it is taken out of service. For example, if this number is set to 16, and the fail count is set to 8, then a modem that fails more than 8 out of its last 16 connection attempts will be taken out of service. 0 indicates that the modem will never be taken out of service for this reason.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..31  

policyConfigReuseBadModems 1.3.6.1.4.1.2637.2.1.252.1.15
Specifies whether modems taken out of service be re-used in worst case scenarios
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

policyConfigDoSS7Resourcing 1.3.6.1.4.1.2637.2.1.252.1.16
Specifies whether the system should perform SS7 resource accounting
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

policyConfigDefaultModemRPI 1.3.6.1.4.1.2637.2.1.252.1.17
Specifies the default RPI that should be assigned to modems when they become operational, and before they take any calls.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..100  

policyConfigModemSleepTimeout 1.3.6.1.4.1.2637.2.1.252.1.18
Specifies the amount of time (in minutes) that a modem can be idle before it is placed in sleep (low-power) mode. 0 specifies that modems should never be placed in sleep mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..600  

policyConfigDNISMatchPolicy 1.3.6.1.4.1.2637.2.1.252.1.19
DS0 allocation policy: use DNIS number to match configured numbers
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER best(1), first(2), any(3)  

policyConfigDS1AllocationPolicy 1.3.6.1.4.1.2637.2.1.252.1.20
DS1 allocation policy: Within or without the DNIS number allocation policy
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER balance(1), first(2)  

policyConfigDS0AllocationPolicy 1.3.6.1.4.1.2637.2.1.252.1.21
DS0 allocation policy: Within or without the DNIS number allocation policy
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER random(1), first(2)  

policyConfigChassisModemThresholdWarning 1.3.6.1.4.1.2637.2.1.252.1.23
0 to disable; level below total # of modems in CVX that alarm is sent
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..3468  

policyConfigSlotModemThresholdWarning 1.3.6.1.4.1.2637.2.1.252.1.24
0 to disable; level below total # of modems on a MAC that alarm is sent
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..204  

policyConfigActionBacklog 1.3.6.1.4.1.2637.2.1.252.1.25
Number of old actions to maintain
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 5..100  

slotConfigTable 1.3.6.1.4.1.2637.2.1.202
Configuration of the physical slot cards in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlotConfigEntry

slotConfigEntry 1.3.6.1.4.1.2637.2.1.202.1
This is the structure of entries in the slotConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlotConfigEntry  

slotConfigPathString 1.3.6.1.4.1.2637.2.1.202.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slotConfigRowStatus 1.3.6.1.4.1.2637.2.1.202.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

slotConfigKeyValue 1.3.6.1.4.1.2637.2.1.202.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slotConfigAdminServiceModule 1.3.6.1.4.1.2637.2.1.202.1.11
The configured part number of the Service Module in this slot.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER smEmpty(0), smScc(1), smMac(2), smDac(3)  

slotConfigAdminLineTerminationModule 1.3.6.1.4.1.2637.2.1.202.1.12
The configured part number of the Line Termination Module in this slot.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ltmEmpty(0), dS3(820121), dS3R(820131), t1(820322), e1(820323), t1x24(820324), e1x24(820325), dS3x2(820326), dS3x2R(820327), dS3x2P(820328), dS3x2PR(820329)  

t1ConfigTable 1.3.6.1.4.1.2637.2.1.2101
T1 Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T1ConfigEntry

t1ConfigEntry 1.3.6.1.4.1.2637.2.1.2101.1
This is the structure of entries in the t1ConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  T1ConfigEntry  

t1ConfigPathString 1.3.6.1.4.1.2637.2.1.2101.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

t1ConfigRowStatus 1.3.6.1.4.1.2637.2.1.2101.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

t1ConfigKeyValue 1.3.6.1.4.1.2637.2.1.2101.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

t1ConfigAdminState 1.3.6.1.4.1.2637.2.1.2101.1.11
T1 Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3), transmitAis(4)  

t1ConfigLineFraming 1.3.6.1.4.1.2637.2.1.2101.1.13
T1 Line Framing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER esf(1), sf(2)  

t1ConfigLineCode 1.3.6.1.4.1.2637.2.1.2101.1.14
T1 Line Encoding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2)  

t1ConfigLineBuildout 1.3.6.1.4.1.2637.2.1.2101.1.15
T1 Line Build Out Attenuation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER x225(1), x150(2), x75(3), x00(4), x06(5), x12(6), x18(7), x24(8), x30(9), e1(10)  

t1ConfigSignaling 1.3.6.1.4.1.2637.2.1.2101.1.16
T1 Line Signaling Method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER isdn(2), rbs(3), ss7(4)  

t1ConfigClockingPriority 1.3.6.1.4.1.2637.2.1.2101.1.17
rank this interface for clocking selection (1-9).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..9  

t1ConfigYellowAlarm 1.3.6.1.4.1.2637.2.1.2101.1.18
yellow alarm method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER northAmerica(1), japan(2)  

t1ConfigLoopBack 1.3.6.1.4.1.2637.2.1.2101.1.19
loop back method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), line(2), payload(3), farEndUp(4), farEndDown(5)  

t1ConfigDefaultNumber 1.3.6.1.4.1.2637.2.1.2101.1.20
Phone Number specified in incoming calls if none is provided by the network. Also used in outgoing calls if no number is specified.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

t1ConfigOverrideNumber 1.3.6.1.4.1.2637.2.1.2101.1.21
Phone Number forced on incoming calls if none is provided by the network. Also used in outgoing calls, and outgoing calls.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

t1ConfigCircuitID 1.3.6.1.4.1.2637.2.1.2101.1.22
Descriptive name of this interface
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..80)  

t1ConfigAlarmCriteria 1.3.6.1.4.1.2637.2.1.2101.1.23
T1 Layer 1 alarm criteria
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER aNSI(1), iTUT(2), iTUTNet(3)  

t1NumberTable 1.3.6.1.4.1.2637.2.1.2107
T1 Numnber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T1NumberEntry

t1NumberEntry 1.3.6.1.4.1.2637.2.1.2107.1
This is the structure of entries in the t1NumberTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  T1NumberEntry  

t1NumberPathString 1.3.6.1.4.1.2637.2.1.2107.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

t1NumberRowStatus 1.3.6.1.4.1.2637.2.1.2107.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

t1NumberKeyValue 1.3.6.1.4.1.2637.2.1.2107.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

t1NumberNumber 1.3.6.1.4.1.2637.2.1.2107.1.11
Number accessible to this T1; '*' will match rest of string; '?' is a single char wild card
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

t1TrunkconfigTable 1.3.6.1.4.1.2637.2.1.2105
T1 Trunk Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T1TrunkconfigEntry

t1TrunkconfigEntry 1.3.6.1.4.1.2637.2.1.2105.1
This is the structure of entries in the t1TrunkconfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  T1TrunkconfigEntry  

t1TrunkconfigPathString 1.3.6.1.4.1.2637.2.1.2105.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

t1TrunkconfigRowStatus 1.3.6.1.4.1.2637.2.1.2105.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

t1TrunkconfigKeyValue 1.3.6.1.4.1.2637.2.1.2105.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

t1TrunkconfigAdminState 1.3.6.1.4.1.2637.2.1.2105.1.11
T1 Trunk adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

t1TrunkconfigClockSource 1.3.6.1.4.1.2637.2.1.2105.1.12
T1 Trunk Clock Source.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER port1(1), port2(2), port3(3), port4(4), port5(5), port6(6), port7(7), port8(8), local(100), recover(101)  

t1TrunkconfigLineFraming 1.3.6.1.4.1.2637.2.1.2105.1.13
T1 Trunk line framing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER esf(1), sf(2)  

t1TrunkconfigLineCode 1.3.6.1.4.1.2637.2.1.2105.1.14
T1 Trunk line encoding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2)  

t1TrunkconfigLineBuildout 1.3.6.1.4.1.2637.2.1.2105.1.15
T1 Trunk line build out attenuation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER x225(1), x150(2), x75(3), x00(4), x06(5), x12(6), x18(7), x24(8), x30(9), e1(10)  

dS3TrunkconfigTable 1.3.6.1.4.1.2637.2.1.2011
DS3 Trunk Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DS3TrunkconfigEntry

dS3TrunkconfigEntry 1.3.6.1.4.1.2637.2.1.2011.1
This is the structure of entries in the dS3TrunkconfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DS3TrunkconfigEntry  

dS3TrunkconfigPathString 1.3.6.1.4.1.2637.2.1.2011.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

dS3TrunkconfigRowStatus 1.3.6.1.4.1.2637.2.1.2011.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dS3TrunkconfigKeyValue 1.3.6.1.4.1.2637.2.1.2011.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

dS3TrunkconfigAdminState 1.3.6.1.4.1.2637.2.1.2011.1.11
DS3 trunk adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dS3TrunkconfigLineFraming 1.3.6.1.4.1.2637.2.1.2011.1.12
DS3 trunk line framing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER m13(1), cBitParity(2)  

dS3TrunkconfigLineBuildout 1.3.6.1.4.1.2637.2.1.2011.1.13
DS3 trunk line buildout: long or short.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER short(1), long(2)  

dS3TrunkconfigTiming 1.3.6.1.4.1.2637.2.1.2011.1.14
DS3 trunk T3 clock source.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER loop(1), local(2)  

t1liuConfigTable 1.3.6.1.4.1.2637.2.1.2007
T1 Line Interface Unit Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T1liuConfigEntry

t1liuConfigEntry 1.3.6.1.4.1.2637.2.1.2007.1
This is the structure of entries in the t1liuConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  T1liuConfigEntry  

t1liuConfigPathString 1.3.6.1.4.1.2637.2.1.2007.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

t1liuConfigRowStatus 1.3.6.1.4.1.2637.2.1.2007.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

t1liuConfigKeyValue 1.3.6.1.4.1.2637.2.1.2007.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

t1liuConfigAdminState 1.3.6.1.4.1.2637.2.1.2007.1.11
T1 LIU adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

t1liuConfigCircuitID 1.3.6.1.4.1.2637.2.1.2007.1.12
T1 Circuit Identifier for this T1 LTM.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

t3ConfigTable 1.3.6.1.4.1.2637.2.1.2005
T3 Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T3ConfigEntry

t3ConfigEntry 1.3.6.1.4.1.2637.2.1.2005.1
This is the structure of entries in the t3ConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  T3ConfigEntry  

t3ConfigPathString 1.3.6.1.4.1.2637.2.1.2005.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

t3ConfigRowStatus 1.3.6.1.4.1.2637.2.1.2005.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

t3ConfigKeyValue 1.3.6.1.4.1.2637.2.1.2005.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

t3ConfigAdminState 1.3.6.1.4.1.2637.2.1.2005.1.11
T3 Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3), transmitAis(4)  

t3ConfigLineFraming 1.3.6.1.4.1.2637.2.1.2005.1.12
T3 line framing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER m13(1), cBitParity(2)  

t3ConfigLineCode 1.3.6.1.4.1.2637.2.1.2005.1.13
T3 line coding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER b3zs(1), notB3zs(2)  

t3ConfigLineBuildout 1.3.6.1.4.1.2637.2.1.2005.1.14
T3 line buildout: long or short.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER short(1), long(2)  

t3ConfigTiming 1.3.6.1.4.1.2637.2.1.2005.1.15
T3 clock source.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER loop(1), local(2)  

t3ConfigLoopBack 1.3.6.1.4.1.2637.2.1.2005.1.16
T3 loop back method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), local(1), remote(2)  

t3ConfigCircuitID 1.3.6.1.4.1.2637.2.1.2005.1.17
T3 Circuit Identifier.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

signalingGatewayTable 1.3.6.1.4.1.2637.2.1.511
Configuration of a CVX SS7 Gateway
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SignalingGatewayEntry

signalingGatewayEntry 1.3.6.1.4.1.2637.2.1.511.1
This is the structure of entries in the signalingGatewayTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SignalingGatewayEntry  

signalingGatewayPathString 1.3.6.1.4.1.2637.2.1.511.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

signalingGatewayRowStatus 1.3.6.1.4.1.2637.2.1.511.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

signalingGatewayKeyValue 1.3.6.1.4.1.2637.2.1.511.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

signalingGatewayIpAddr 1.3.6.1.4.1.2637.2.1.511.1.13
IP Address of CVX SS7 Gateway
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dacConfigTable 1.3.6.1.4.1.2637.2.1.2001
DAC Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DacConfigEntry

dacConfigEntry 1.3.6.1.4.1.2637.2.1.2001.1
This is the structure of entries in the dacConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DacConfigEntry  

dacConfigPathString 1.3.6.1.4.1.2637.2.1.2001.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

dacConfigRowStatus 1.3.6.1.4.1.2637.2.1.2001.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dacConfigKeyValue 1.3.6.1.4.1.2637.2.1.2001.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

dacConfigAdminState 1.3.6.1.4.1.2637.2.1.2001.1.11
DAC Configuration adminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), pendingDisable(3)  

tunnelGroupConfigTable 1.3.6.1.4.1.2637.2.1.1502
Tunnel Group Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TunnelGroupConfigEntry

tunnelGroupConfigEntry 1.3.6.1.4.1.2637.2.1.1502.1
This is the structure of entries in the tunnelGroupConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TunnelGroupConfigEntry  

tunnelGroupConfigPathString 1.3.6.1.4.1.2637.2.1.1502.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

tunnelGroupConfigRowStatus 1.3.6.1.4.1.2637.2.1.1502.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tunnelGroupConfigKeyValue 1.3.6.1.4.1.2637.2.1.1502.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

tunnelGroupConfigTunnelProtocol 1.3.6.1.4.1.2637.2.1.1502.1.11
Tunnel protocol used by this tunnel group
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), l2F(1), l2TP(2), dVS(3), aTMP(4)  

tunnelGroupConfigTunnelStrategy 1.3.6.1.4.1.2637.2.1.1502.1.12
Strategy for assigning calls to L2F or L2TP gateways
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), loadBalance(1)  

frInterfaceConfigTable 1.3.6.1.4.1.2637.2.1.3001
Frame Relay Interface Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrInterfaceConfigEntry

frInterfaceConfigEntry 1.3.6.1.4.1.2637.2.1.3001.1
This is the structure of entries in the frInterfaceConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  FrInterfaceConfigEntry  

frInterfaceConfigPathString 1.3.6.1.4.1.2637.2.1.3001.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

frInterfaceConfigRowStatus 1.3.6.1.4.1.2637.2.1.3001.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

frInterfaceConfigKeyValue 1.3.6.1.4.1.2637.2.1.3001.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frInterfaceConfigFrDlcmiIfIndex 1.3.6.1.4.1.2637.2.1.3001.1.11
Unique identifier that identifies this Frame Relay Interface configuration
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..8  

frInterfaceConfigFrDlcmiLMIType 1.3.6.1.4.1.2637.2.1.3001.1.12
This variable states which Data Link Connec- tion Management scheme is active on the Frame Relay interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER lmiNone(1), lmiRev1(2), annexD(3), annexB(4), iTU933A(5)  

frInterfaceConfigFrDlcmiAddress 1.3.6.1.4.1.2637.2.1.3001.1.13
This variable states which address format is in use on the Frame Relay interface. Currently, on Q922 is supported.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER q921(1), q922March90(2), q922November90(3), q922(4)  

frInterfaceConfigFrDlcmiAddressLen 1.3.6.1.4.1.2637.2.1.3001.1.14
This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion. Currently, on 2 octet address are supported
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..4  

frInterfaceConfigFrDlcmiPollingInterval 1.3.6.1.4.1.2637.2.1.3001.1.15
This is the number of seconds between successive status enquiry messages. This is equivalent to T391.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 5..30  

frInterfaceConfigFrDlcmiFullEnquiryInterval 1.3.6.1.4.1.2637.2.1.3001.1.16
Number of status enquiry intervals that pass before issuance of a full status enquiry message. This is equivalent to N391.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

frInterfaceConfigFrDlcmiErrorThreshold 1.3.6.1.4.1.2637.2.1.3001.1.17
This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is equivalent to N392.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

frInterfaceConfigFrDlcmiMonitoredEvents 1.3.6.1.4.1.2637.2.1.3001.1.18
This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down. This is equivalent to N393.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

frInterfaceConfigFrDlcmiMaxSupportedVCs 1.3.6.1.4.1.2637.2.1.3001.1.19
The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. Currently, any DLCI dictated by the Frame Relay network will not be enabled unless that frCircuitEntry is configured.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..976  

frInterfaceConfigFrDlcmiMulticast 1.3.6.1.4.1.2637.2.1.3001.1.20
This indicates whether the Frame Relay interface is using a multicast service
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER nonBroadcast(1), broadcast(2)  

frInterfaceConfigFrDlcmiLinkType 1.3.6.1.4.1.2637.2.1.3001.1.21
This indicates whether the Frame Relay interface is the Network-side of a UNI (UNI-DCE), User-side of a UNI (UNI-DTE) or a Network-Network Inteface (NNI).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER uniDce(1), uniDte(2), nni(3)  

frInterfaceConfigFrDlcmiMaxLogIntf 1.3.6.1.4.1.2637.2.1.3001.1.22
Maximum number of Logical Interfaces supported on this Frame Relay Interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..976  

frInterfaceConfigFrDlcmiLinkEnable 1.3.6.1.4.1.2637.2.1.3001.1.23
Specifies whether this interface is to be activated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

frInterfaceConfigFrDlcmiLMIFlowControl 1.3.6.1.4.1.2637.2.1.3001.1.24
Specifies whether LMI based (R-bit) notification performs flow control for the Circuits on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

frInterfaceConfigFrDlcmiBECNFlowControl 1.3.6.1.4.1.2637.2.1.3001.1.25
Specifies whether BECN notification performs flow control for the Circuits on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

frInterfaceConfigFrDlcmiLMIBandwidthControl 1.3.6.1.4.1.2637.2.1.3001.1.26
Specifies whether LMI based CIR notification affects the CIR flow control parameters for the circuits on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

frInterfaceConfigFrDlcmiInjectionManagement 1.3.6.1.4.1.2637.2.1.3001.1.27
Specifies whether injection management (for holding data to prevent exceeding excess rates) is enabled on all circuits on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER forced(1), buffered(2), standard(3)  

frInterfaceConfigFrDlcmiMaxFrameSize 1.3.6.1.4.1.2637.2.1.3001.1.28
Specifies maximum frame size allowed on this interface, including data link headers.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frInterfaceConfigFrDlcmiName 1.3.6.1.4.1.2637.2.1.3001.1.29
Frame Relay Interface Name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

frInterfaceConfigFrDlcmiLmiDlci 1.3.6.1.4.1.2637.2.1.3001.1.30
The dlci upon which LMI traffic will be broadcast.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dlci0(0), dlci1023(1023)  

frInterfaceConfigFrDlcmiDceErrorThreshold 1.3.6.1.4.1.2637.2.1.3001.1.31
This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is equivalent to N392.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

frInterfaceConfigFrDlcmiDceMonitoredEvents 1.3.6.1.4.1.2637.2.1.3001.1.32
This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down. This is equivalent to N393.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

frLogicalIFConfigTable 1.3.6.1.4.1.2637.2.1.3003
Frame Relay Logical Interface Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrLogicalIFConfigEntry

frLogicalIFConfigEntry 1.3.6.1.4.1.2637.2.1.3003.1
This is the structure of entries in the frLogicalIFConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  FrLogicalIFConfigEntry  

frLogicalIFConfigPathString 1.3.6.1.4.1.2637.2.1.3003.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

frLogicalIFConfigRowStatus 1.3.6.1.4.1.2637.2.1.3003.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

frLogicalIFConfigKeyValue 1.3.6.1.4.1.2637.2.1.3003.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frLogicalIFConfigFrLIFIfIndex 1.3.6.1.4.1.2637.2.1.3003.1.11
This is the frDlcmiIfIndex for this Logical Interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..8  

frLogicalIFConfigFrLIFIndex 1.3.6.1.4.1.2637.2.1.3003.1.12
Unique identifier that identifies this Frame Relay LIF configuration.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..976  

frLogicalIFConfigFrLIFEnable 1.3.6.1.4.1.2637.2.1.3003.1.13
Specifies whether this interface is to be activated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

frLogicalIFConfigFrLIFName 1.3.6.1.4.1.2637.2.1.3003.1.14
Logical Interface Name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

frCircuitConfigTable 1.3.6.1.4.1.2637.2.1.3004
Frame Relay Circuit Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrCircuitConfigEntry

frCircuitConfigEntry 1.3.6.1.4.1.2637.2.1.3004.1
This is the structure of entries in the frCircuitConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  FrCircuitConfigEntry  

frCircuitConfigPathString 1.3.6.1.4.1.2637.2.1.3004.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

frCircuitConfigRowStatus 1.3.6.1.4.1.2637.2.1.3004.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

frCircuitConfigKeyValue 1.3.6.1.4.1.2637.2.1.3004.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frCircuitConfigFrCircuitIfIndex 1.3.6.1.4.1.2637.2.1.3004.1.11
This is the frDlcmiIfIndex for this Circuit
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..8  

frCircuitConfigFrCircuitLIFIndex 1.3.6.1.4.1.2637.2.1.3004.1.12
Unique identifier that identifies the Frame Relay LIF for this Circuit
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..976  

frCircuitConfigFrCircuitDlci 1.3.6.1.4.1.2637.2.1.3004.1.13
The Data Link Connection Identifier for this virtual circuit.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 16..991  

frCircuitConfigFrCircuitCommittedBurst 1.3.6.1.4.1.2637.2.1.3004.1.15
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. If Bc > 0, then CIR must be set to a non-zero value
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frCircuitConfigFrCircuitExcessBurst 1.3.6.1.4.1.2637.2.1.3004.1.16
This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frCircuitConfigFrCircuitThroughput 1.3.6.1.4.1.2637.2.1.3004.1.17
Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=frCircuitCommittedBurst/frCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=frCircuitExcessBurst/ifSpeed. If CIR > 0, then Bc must be set to a non-zero value
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frCircuitConfigFrCircuitMulticast 1.3.6.1.4.1.2637.2.1.3004.1.18
This indicates whether this VC is used as a unicast VC (i.e. not multicast). Currently, if not unicast, then multicast.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unicast(1), oneWay(2), twoWay(3), mcast(4)  

frCircuitConfigFrCircuitVCCEnable 1.3.6.1.4.1.2637.2.1.3004.1.21
NOT USED
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

frCircuitConfigFrCircuitCommittedBurstMin 1.3.6.1.4.1.2637.2.1.3004.1.22
This variable indicates the minimum bound for the variable hjCircuitCommittedBurst. If a SET is received to this variable above the value of the variable CircuitCommittedBurst, the agent should respond bad-Value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frCircuitConfigFrCircuitCongestionMonitorPeriod 1.3.6.1.4.1.2637.2.1.3004.1.23
The measurement interval for the Congestion Monitor, which determines whether to raise or lower the Commited Information Rate. This period is expressed in 100ths of a second.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

frCircuitConfigFrCircuitName 1.3.6.1.4.1.2637.2.1.3004.1.24
FR Circuit Name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ethernetConfigTable 1.3.6.1.4.1.2637.2.1.3051
Ethernet configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetConfigEntry

ethernetConfigEntry 1.3.6.1.4.1.2637.2.1.3051.1
This is the structure of entries in the ethernetConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetConfigEntry  

ethernetConfigPathString 1.3.6.1.4.1.2637.2.1.3051.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ethernetConfigRowStatus 1.3.6.1.4.1.2637.2.1.3051.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ethernetConfigKeyValue 1.3.6.1.4.1.2637.2.1.3051.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ethernetConfigEthernetPhyPort 1.3.6.1.4.1.2637.2.1.3051.1.11
This value indicates the physical port identifier for this slot.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..5  

ethernetConfigEthernetEnable 1.3.6.1.4.1.2637.2.1.3051.1.12
Specifies whether this interface is to be activated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ethernetConfigEthernetTlen 1.3.6.1.4.1.2637.2.1.3051.1.13
Sets the size of the Transmit Buffer Ring for the Ethernet driver.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ringLen8(3), ringLen16(4), ringLen32(5), ringLen64(6), ringLen128(7), ringLen256(8), ringLen512(9)  

ethernetConfigEthernetRlen 1.3.6.1.4.1.2637.2.1.3051.1.14
Sets the size of the Receive Buffer Ring for the Ethernet driver.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ringLen8(3), ringLen16(4), ringLen32(5), ringLen64(6), ringLen128(7), ringLen256(8), ringLen512(9)  

ethernetConfigEthernetAutoneg 1.3.6.1.4.1.2637.2.1.3051.1.15
Ethernet auto-negotiation flag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER autonegOff(0), autonegOn(1)  

ethernetConfigEthernetPortspeed 1.3.6.1.4.1.2637.2.1.3051.1.16
Ethernet port speed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER x10mbps(0), x100mbps(1)  

ethernetConfigEthernetFullduplex 1.3.6.1.4.1.2637.2.1.3051.1.17
Control whether interface is configured for FullDuplex or not.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER fullduplexOff(0), fullduplexOn(1)  

ethernetConfigEthernetPromEnable 1.3.6.1.4.1.2637.2.1.3051.1.18
Ethernet promiscuous mode flag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER promOff(0), promOn(1)  

ethernetConfigEthernetBcastControl 1.3.6.1.4.1.2637.2.1.3051.1.19
Control the receiving of Broadcast frames on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER bcastEnable(0), bcastDisable(1)  

ethernetConfigEthernetFCSControl 1.3.6.1.4.1.2637.2.1.3051.1.20
Control adding FCS on transmitted frames on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER fcsEnable(0), fcsDisable(1)  

ethernetConfigEthernetLoopback 1.3.6.1.4.1.2637.2.1.3051.1.21
Configures the port to be either no Loopback, Internal Loopback, External Loopback or MII Loopback.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noLoopback(0), internalLoopback(1), externalLoopback(2), miiLoopback(3)  

ethernetConfigEthernetLinkTest 1.3.6.1.4.1.2637.2.1.3051.1.22
Configures the port to be, for 10BASE-T, to disable Link Test Functionality which is used to determine link integrity by listening for link beat pulses. Setting this attribute will disable link beat pulse detection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ltEnable(0), ltDisable(1)  

ipWin32Table 1.3.6.1.4.1.2637.2.1.3052
win32 ethernet connection
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpWin32Entry

ipWin32Entry 1.3.6.1.4.1.2637.2.1.3052.1
This is the structure of entries in the ipWin32Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpWin32Entry  

ipWin32PathString 1.3.6.1.4.1.2637.2.1.3052.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipWin32RowStatus 1.3.6.1.4.1.2637.2.1.3052.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipWin32KeyValue 1.3.6.1.4.1.2637.2.1.3052.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipWin32Instance 1.3.6.1.4.1.2637.2.1.3052.1.11
Instance of Ethernet connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipWin32Devname 1.3.6.1.4.1.2637.2.1.3052.1.12
Ethernet connection device name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

loopbackConfigTable 1.3.6.1.4.1.2637.2.1.3101
Loopback Configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoopbackConfigEntry

loopbackConfigEntry 1.3.6.1.4.1.2637.2.1.3101.1
This is the structure of entries in the loopbackConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  LoopbackConfigEntry  

loopbackConfigPathString 1.3.6.1.4.1.2637.2.1.3101.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

loopbackConfigRowStatus 1.3.6.1.4.1.2637.2.1.3101.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

loopbackConfigKeyValue 1.3.6.1.4.1.2637.2.1.3101.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

loopbackConfigMode 1.3.6.1.4.1.2637.2.1.3101.1.11
What to do with packets sent to this interface while in loopback mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER deliver(0), discard(1), reject(2)  

loopbackConfigAdminState 1.3.6.1.4.1.2637.2.1.3101.1.12
Loopback configuration AdminState.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rbsConfigTable 1.3.6.1.4.1.2637.2.1.2205
Robbed-Bit Signalling Configuration Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbsConfigEntry

rbsConfigEntry 1.3.6.1.4.1.2637.2.1.2205.1
This is the structure of entries in the rbsConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbsConfigEntry  

rbsConfigPathString 1.3.6.1.4.1.2637.2.1.2205.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

rbsConfigRowStatus 1.3.6.1.4.1.2637.2.1.2205.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rbsConfigKeyValue 1.3.6.1.4.1.2637.2.1.2205.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsConfigMethod 1.3.6.1.4.1.2637.2.1.2205.1.11
RBS method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER emWinkStart(1), emDdsdStart(2), emImmediateStart(3), fxoLoopStart(4), fxsLoopStart(5), fxoGroundStart(6), fxsGroundStart(7), featureGroupD(8), taiwanMfr1(9)  

rbsConfigDid 1.3.6.1.4.1.2637.2.1.2205.1.13
Enable Direct Inward Dial. When true, digits are collected to determine the called address. When false, no digits are collected.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

rbsConfigAllowNoDigits 1.3.6.1.4.1.2637.2.1.2205.1.14
Determines the action taken when Direct Inward Dial is configured, but no resources are available to collect the digits. If true, then calls are accepted without the called address information. If false, then busy is re turned
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

rbsConfigDod 1.3.6.1.4.1.2637.2.1.2205.1.15
Enable Direct Outward Dial. When true, digits are sent for outgoing calls. When false, no digits are sent
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

rbsConfigGlareResolve 1.3.6.1.4.1.2637.2.1.2205.1.17
Determines the action taken when glare (collision between incoming and outgoing call) is detected. If true, the glare is resolved by abandoning the outgoing call. If false, the outgoing call is preserved, and the far si de is assumed to abandon the incoming call
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

rbsConfigOOS 1.3.6.1.4.1.2637.2.1.2205.1.19
Indicates the state of the channel.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

rbsConfigBusyOutOOS 1.3.6.1.4.1.2637.2.1.2205.1.20
Determines a channel's appearance when in out-of-service state. If true, the channel appears busy (off-hook). If false, the channel remains on-hook, but will not answer calls
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

rbsConfigDigitType 1.3.6.1.4.1.2637.2.1.2205.1.21
RBS Digit Type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dtmf(1), mf(2), pulse(3)  

rbsConfigMaxCalledDigits 1.3.6.1.4.1.2637.2.1.2205.1.22
Maximum number of expected DNIS digits (called number) in an wink-start incoming call.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..24  

rbsConfigReqR1CallingNumber 1.3.6.1.4.1.2637.2.1.2205.1.23
Request the calling number on an incoming MF R1 call. Used in Taiwan.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

rbsTimersTable 1.3.6.1.4.1.2637.2.1.2206
RBS Timers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbsTimersEntry

rbsTimersEntry 1.3.6.1.4.1.2637.2.1.2206.1
This is the structure of entries in the rbsTimersTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbsTimersEntry  

rbsTimersPathString 1.3.6.1.4.1.2637.2.1.2206.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

rbsTimersRowStatus 1.3.6.1.4.1.2637.2.1.2206.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rbsTimersKeyValue 1.3.6.1.4.1.2637.2.1.2206.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersHitThresh 1.3.6.1.4.1.2637.2.1.2206.1.11
The amount of time a robbed bit pattern must be stable before it is considered to have changed value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInSeizeHold 1.3.6.1.4.1.2637.2.1.2206.1.12
The minimum duration of an incoming off-hook pattern to be considered a valid line seizure.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInPreWinkExtend 1.3.6.1.4.1.2637.2.1.2206.1.13
The maximum delay before sending a wink start
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInMinWinkHold 1.3.6.1.4.1.2637.2.1.2206.1.14
The minimum duration of a wink start
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInMaxWinkHold 1.3.6.1.4.1.2637.2.1.2206.1.15
The maximum duration of a wink start
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInPostWink 1.3.6.1.4.1.2637.2.1.2206.1.16
The duration of 'blind' period after sending a wink start
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInDigit 1.3.6.1.4.1.2637.2.1.2206.1.17
The maximum duration to collect all digits for an incoming call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersAlerting 1.3.6.1.4.1.2637.2.1.2206.1.18
The maximum duration in alerting state before abandoning call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutSeizeHold 1.3.6.1.4.1.2637.2.1.2206.1.19
The minimum duration of off-hook signal to seize line for an outgoing call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutWinkWait 1.3.6.1.4.1.2637.2.1.2206.1.20
The maximum wink delay allowed after seizing line for outgoing call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutMaxWinkHold 1.3.6.1.4.1.2637.2.1.2206.1.21
The maximum wink duration before declaring glare
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutMaxWinkGlare 1.3.6.1.4.1.2637.2.1.2206.1.22
The maximum allowed duration of glare, when GlareResolve is false)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutWaitSeizeAck 1.3.6.1.4.1.2637.2.1.2206.1.23
The maximum allowed seizure-acknowledge delay, for Ground-Start/FXS
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutPostWink 1.3.6.1.4.1.2637.2.1.2206.1.24
The duration of 'blind' period after receiving a wink start
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutFirstDigit 1.3.6.1.4.1.2637.2.1.2206.1.25
The maximum delay before sending the first dial digit
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutDigit 1.3.6.1.4.1.2637.2.1.2206.1.26
The maximum duration to send all dial digits
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutPostDigit 1.3.6.1.4.1.2637.2.1.2206.1.27
The duration of 'blind' period after sending dial digits
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutWaitConnect 1.3.6.1.4.1.2637.2.1.2206.1.28
The maximum delay before receiving a connect indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutConnectHold 1.3.6.1.4.1.2637.2.1.2206.1.29
The minimum duration of an off-hook pattern to be considered a valid connect indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersLocalRelease 1.3.6.1.4.1.2637.2.1.2206.1.30
The maximum delay to release local system resources
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersLineRelease 1.3.6.1.4.1.2637.2.1.2206.1.31
When locally releasing a call, the maximum delay before receiving a line-release indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersLineReleaseHold 1.3.6.1.4.1.2637.2.1.2206.1.32
The minimum duration of an on-hook pattern to be considered a valid line-release indication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersRecover 1.3.6.1.4.1.2637.2.1.2206.1.33
The minimum duration of 'blind' period after each incoming or outgoing call
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInWaitKP 1.3.6.1.4.1.2637.2.1.2206.1.34
The maximum delay before receiving a KP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInPostDigitDelay 1.3.6.1.4.1.2637.2.1.2206.1.35
After receiving MF digits, the minimum delay before sending out a wink
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInToneDigitWait 1.3.6.1.4.1.2637.2.1.2206.1.36
Maximum wait period for incoming tone digits (DTMF DNIS digits in wink-start trunks, or MF ANI digits in R1 trunks)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInKpAckDelay 1.3.6.1.4.1.2637.2.1.2206.1.37
Delay before sending KP acknowledge back. Used in Taiwan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInKpDetectWait 1.3.6.1.4.1.2637.2.1.2206.1.38
Maximum waiting period for KP. Used in Taiwan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInAniWaitKp 1.3.6.1.4.1.2637.2.1.2206.1.39
Maximum waiting period for KP while collecting Calling NUmber. Used in Taiwan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersInPreKpExtend 1.3.6.1.4.1.2637.2.1.2206.1.40
The maximum Proceed-to-Send delay before the CO drops the call. Used in Taiwan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

rbsTimersOutPreDialQuietHold 1.3.6.1.4.1.2637.2.1.2206.1.41
Hold time after KP, before dialing out. Used in Taiwan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipLocalSessionTable 1.3.6.1.4.1.2637.2.1.4010
VPOP Local Session Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpLocalSessionEntry

ipLocalSessionEntry 1.3.6.1.4.1.2637.2.1.4010.1
This is the structure of entries in the ipLocalSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpLocalSessionEntry  

ipLocalSessionPathString 1.3.6.1.4.1.2637.2.1.4010.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipLocalSessionRowStatus 1.3.6.1.4.1.2637.2.1.4010.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipLocalSessionKeyValue 1.3.6.1.4.1.2637.2.1.4010.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipLocalSessionRemoteIp 1.3.6.1.4.1.2637.2.1.4010.1.11
ip address for remote side of connection
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipLocalSessionRemoteMask 1.3.6.1.4.1.2637.2.1.4010.1.12
ip mask for remote side
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipLocalSessionLocalIp 1.3.6.1.4.1.2637.2.1.4010.1.13
ip address for local side of connection
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipLocalSessionAcceptRip 1.3.6.1.4.1.2637.2.1.4010.1.14
accept RIP?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipLocalSessionFilterId 1.3.6.1.4.1.2637.2.1.4010.1.15
Local session filter id.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipLocalSessionMtu 1.3.6.1.4.1.2637.2.1.4010.1.16
Local session mtu size.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipLocalSessionPoolNumber 1.3.6.1.4.1.2637.2.1.4010.1.17
pool from which IP address was allocated
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipLocalSessionRouteMulticast 1.3.6.1.4.1.2637.2.1.4010.1.18
Local session route multicast?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

ipLocalSessionRateLimitMulticast 1.3.6.1.4.1.2637.2.1.4010.1.19
Local session rate limit on multicast.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipLocalSessionFramedRouting 1.3.6.1.4.1.2637.2.1.4010.1.20
Local session framed routing?
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

clearTcpLocalSessionTable 1.3.6.1.4.1.2637.2.1.4009
ClearTCP Local Session Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClearTcpLocalSessionEntry

clearTcpLocalSessionEntry 1.3.6.1.4.1.2637.2.1.4009.1
This is the structure of entries in the clearTcpLocalSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ClearTcpLocalSessionEntry  

clearTcpLocalSessionPathString 1.3.6.1.4.1.2637.2.1.4009.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

clearTcpLocalSessionRowStatus 1.3.6.1.4.1.2637.2.1.4009.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

clearTcpLocalSessionKeyValue 1.3.6.1.4.1.2637.2.1.4009.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

clearTcpLocalSessionHostIpCount 1.3.6.1.4.1.2637.2.1.4009.1.11
number of IP addresses to try
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..5  

clearTcpLocalSessionHostIp1 1.3.6.1.4.1.2637.2.1.4009.1.12
ip address to try (up to 5)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

clearTcpLocalSessionHostIp2 1.3.6.1.4.1.2637.2.1.4009.1.13
ip address to try (up to 5)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

clearTcpLocalSessionHostIp3 1.3.6.1.4.1.2637.2.1.4009.1.14
ip address to try (up to 5)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

clearTcpLocalSessionHostIp4 1.3.6.1.4.1.2637.2.1.4009.1.15
ip address to try (up to 5)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

clearTcpLocalSessionHostIp5 1.3.6.1.4.1.2637.2.1.4009.1.16
ip address to try (up to 5)
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

clearTcpLocalSessionConnectType 1.3.6.1.4.1.2637.2.1.4009.1.17
ClearTCP connection type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER telnet(1), rlogin(2), cleartcp(3)  

clearTcpLocalSessionRemotePort 1.3.6.1.4.1.2637.2.1.4009.1.18
ip port of remote tcp server
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

clearTcpLocalSessionHostName 1.3.6.1.4.1.2637.2.1.4009.1.19
DNS name of remote TCP server
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

pppLocalSessionTable 1.3.6.1.4.1.2637.2.1.4008
PPP Local Session Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PppLocalSessionEntry

pppLocalSessionEntry 1.3.6.1.4.1.2637.2.1.4008.1
This is the structure of entries in the pppLocalSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PppLocalSessionEntry  

pppLocalSessionPathString 1.3.6.1.4.1.2637.2.1.4008.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

pppLocalSessionRowStatus 1.3.6.1.4.1.2637.2.1.4008.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pppLocalSessionKeyValue 1.3.6.1.4.1.2637.2.1.4008.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppLocalSessionVJEnabled 1.3.6.1.4.1.2637.2.1.4008.1.11
Enable VJ TCP/IP header compression
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

pppLocalSessionConnectLimit 1.3.6.1.4.1.2637.2.1.4008.1.12
Overall connection time limit (in minutes, 0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

pppLocalSessionInactivityLimit 1.3.6.1.4.1.2637.2.1.4008.1.13
Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..120  


localUsersTable 1.3.6.1.4.1.2637.2.1.4011
Local VPOP user authentication information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LocalUsersEntry

localUsersEntry 1.3.6.1.4.1.2637.2.1.4011.1
This is the structure of entries in the localUsersTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  LocalUsersEntry  

localUsersPathString 1.3.6.1.4.1.2637.2.1.4011.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

localUsersRowStatus 1.3.6.1.4.1.2637.2.1.4011.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

localUsersKeyValue 1.3.6.1.4.1.2637.2.1.4011.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

localUsersUsername 1.3.6.1.4.1.2637.2.1.4011.1.11
the user name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..68)  

localUsersPassword 1.3.6.1.4.1.2637.2.1.4011.1.12
the password associated with the user name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..68)  

localUsersUserInformation 1.3.6.1.4.1.2637.2.1.4011.1.13
information of user
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSessionAccessListTable 1.3.6.1.4.1.2637.2.1.4012
ip session access list filter entry; defines IP filter
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpSessionAccessListEntry

ipSessionAccessListEntry 1.3.6.1.4.1.2637.2.1.4012.1
This is the structure of entries in the ipSessionAccessListTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpSessionAccessListEntry  

ipSessionAccessListPathString 1.3.6.1.4.1.2637.2.1.4012.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ipSessionAccessListRowStatus 1.3.6.1.4.1.2637.2.1.4012.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSessionAccessListKeyValue 1.3.6.1.4.1.2637.2.1.4012.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

ipSessionAccessListFilterStatus 1.3.6.1.4.1.2637.2.1.4012.1.11
Status of this filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSessionAccessListFilterType 1.3.6.1.4.1.2637.2.1.4012.1.12
The type of this filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER in(1), out(2)  

ipSessionAccessListMode 1.3.6.1.4.1.2637.2.1.4012.1.13
set to drop or pass packet if entry matches
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipSessionAccessListProtocol 1.3.6.1.4.1.2637.2.1.4012.1.14
IP protocol field to match
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(0), icmp(1), igmp(2), tcp(6), udp(17), ospf(89)  

ipSessionAccessListSourceIp 1.3.6.1.4.1.2637.2.1.4012.1.20
source IP address prefix to match
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipSessionAccessListSourceMask 1.3.6.1.4.1.2637.2.1.4012.1.21
mask applied to source IP address before matching
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipSessionAccessListDestinationIp 1.3.6.1.4.1.2637.2.1.4012.1.22
destination IP address prefix to match
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipSessionAccessListDestinationMask 1.3.6.1.4.1.2637.2.1.4012.1.23
mask applied to destination IP address before matching
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipSessionAccessListCompare 1.3.6.1.4.1.2637.2.1.4012.1.30
method of comparison for destination UDP/TCP port
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), eq(1), ne(2), lt(3), gt(4)  

ipSessionAccessListDestinationPort 1.3.6.1.4.1.2637.2.1.4012.1.31
if protocol is UDP or TCP, the port number to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noPort(0), ftpData(20), ftp(21), telnet(23), smtp(25), nameserver(42), domain(53), tftp(69), gopher(70), finger(79), www(80), kerberos(88), hostname(101), nntp(119), ntp(123), ssl(443), exec(512), login(513), cmd(514), talk(517)  

ipSessionAccessListIcmpType 1.3.6.1.4.1.2637.2.1.4012.1.32
if protocol is ICMP, the ICMP type to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ipSessionAccessListIcmpCode 1.3.6.1.4.1.2637.2.1.4012.1.33
if protocol is ICMP, the ICMP code to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ipSessionAccessListIgmpType 1.3.6.1.4.1.2637.2.1.4012.1.34
if protocol is IGMP, the IGMP type to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ipSessionAccessListTcpFlag 1.3.6.1.4.1.2637.2.1.4012.1.35
if protocol is TCP, the TCP flags to compare against
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), any(1), established(2)  

vpopConfigTable 1.3.6.1.4.1.2637.2.1.4005
VPOP Configuration Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VpopConfigEntry

vpopConfigEntry 1.3.6.1.4.1.2637.2.1.4005.1
This is the structure of entries in the vpopConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VpopConfigEntry  

vpopConfigPathString 1.3.6.1.4.1.2637.2.1.4005.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

vpopConfigRowStatus 1.3.6.1.4.1.2637.2.1.4005.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vpopConfigKeyValue 1.3.6.1.4.1.2637.2.1.4005.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

vpopConfigName 1.3.6.1.4.1.2637.2.1.4005.1.11
name of VPOP
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vpopConfigAuthenticationServerGroup 1.3.6.1.4.1.2637.2.1.4005.1.20
key of AAA server group to use for authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

vpopConfigAuthorizationServerGroup 1.3.6.1.4.1.2637.2.1.4005.1.21
key of AAA server group to use for authorization
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

vpopConfigAccountingServerGroup 1.3.6.1.4.1.2637.2.1.4005.1.22
key of AAA server group to use for accounting
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

vpopConfigPrivateFlag 1.3.6.1.4.1.2637.2.1.4005.1.28
if true, don't advertise session routes via rip/ospf
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigRouteAdvertise 1.3.6.1.4.1.2637.2.1.4005.1.30
method of advertising dynamic session routes
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER advertisePool(1), advertiseHosts(2)  

vpopConfigMaxSessions 1.3.6.1.4.1.2637.2.1.4005.1.31
Number of sessions allowed for this Vpop, 0 for unlimited
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1344  

vpopConfigAddressMode 1.3.6.1.4.1.2637.2.1.4005.1.32
ip address allocation mode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER remote(1), local(2), localonly(3)  

vpopConfigLocalAddress 1.3.6.1.4.1.2637.2.1.4005.1.33
local (NAS-side) address of dial-up connections
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vpopConfigAOLAuthLocal 1.3.6.1.4.1.2637.2.1.4005.1.34
Check well-known America Online user names and passwords locally, without forwarding them to an authentication server.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigTunnelGroup 1.3.6.1.4.1.2637.2.1.4005.1.35
Key of tunnel group to use. If 0, calls to this VPOP will not be tunneled. If non-zero, all calls to this VPOP will be tunneled to the specified group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1000  

vpopConfigAuthMethod 1.3.6.1.4.1.2637.2.1.4005.1.36
Authentication method of dialin users
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER remoteOnly(1), localOnly(2), remoteFirst(3), localFirst(4)  

vpopConfigVrouterId 1.3.6.1.4.1.2637.2.1.4005.1.40
key of virtual router to use for this VPOP (0 for default)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

vpopConfigMulticastClient 1.3.6.1.4.1.2637.2.1.4005.1.41
default state of multicast for vpop clients; if disabled, vpop clients are never allowed to do multicast routing
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER defaultOn(1), defaultOff(2), disabled(3)  

vpopConfigAdvertiseRadiusRoutes 1.3.6.1.4.1.2637.2.1.4005.1.42
Advertise RADIUS assigned session routes.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigVoiceMode 1.3.6.1.4.1.2637.2.1.4005.1.43
All calls to this VPOP will be treated like voice mode calls.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigGatewayType 1.3.6.1.4.1.2637.2.1.4005.1.44
Type of gateway used for processing calls on this VPOP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER data(1), voice(2), tandem(3), hub(4), test(5)  

vpopConfigSourceIpAddress 1.3.6.1.4.1.2637.2.1.4005.1.50
Source IP address for this VPOP
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vpopConfigMultilinkTunnelGroup 1.3.6.1.4.1.2637.2.1.4005.1.51
Key of tunnel group to use for all multilink PPP calls. If non-zero, all multilink PPP calls to this VPOP will be tunneled to the specified group. If 0, the 'TunnelGroup' parameter determines if and where multilink PPP calls are tunneled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1000  

vpopConfigUseIPPoolFromOtherVPOP 1.3.6.1.4.1.2637.2.1.4005.1.52
If TRUE, this VPOP will local pools from the IPPoolVPOP
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigIPPoolVPOP 1.3.6.1.4.1.2637.2.1.4005.1.53
key of VPOP whose IP pools will be used if UseIPPoolFromOtherVPOP is TRUE
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

vpopConfigPreserveTunnelInfo 1.3.6.1.4.1.2637.2.1.4005.1.55
Preserve existing Tunnel Info across a VPOP move
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigGratuitousArpEnabled 1.3.6.1.4.1.2637.2.1.4005.1.56
State whether gratuiotous arp is enabled for this vpop
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigMLPSubsequentLinkAuth 1.3.6.1.4.1.2637.2.1.4005.1.57
If false, subsequent links of an MLP bundle are not authenticated
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigSendIPHint 1.3.6.1.4.1.2637.2.1.4005.1.59
Send the Framed IP address attribute in the Radius Request packet with the proposed IP address
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigFilterErrorEnable 1.3.6.1.4.1.2637.2.1.4005.1.60
If a RADIUS Filter-Id attribute is received and the filter list name does not exist on the switch, drop the call and send a cvx-filter-error trap.
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

vpopConfigL2TPDefaultSendName 1.3.6.1.4.1.2637.2.1.4005.1.70
Default name to send as the Host name in the L2TP Start Control Channel Request packet to open a tunnel. This will be used if the SendName is not specified in the L2TP_LNS configuration or if it is not returned from a RADIUS server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

vpopConfigL2TPDefaultSharedSecret 1.3.6.1.4.1.2637.2.1.4005.1.71
Default Shared Secret to use when opening a tunnel to the LNS. This will be used if the SharedSecret is not specified in the L2TP_LNS configuration or if it is not returned from a RADIUS server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

dialedNumberTable 1.3.6.1.4.1.2637.2.1.4004
VPOP Dialed Number Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DialedNumberEntry

dialedNumberEntry 1.3.6.1.4.1.2637.2.1.4004.1
This is the structure of entries in the dialedNumberTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DialedNumberEntry  

dialedNumberPathString 1.3.6.1.4.1.2637.2.1.4004.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

dialedNumberRowStatus 1.3.6.1.4.1.2637.2.1.4004.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dialedNumberKeyValue 1.3.6.1.4.1.2637.2.1.4004.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

dialedNumberNumber 1.3.6.1.4.1.2637.2.1.4004.1.11
Dialed number to match for VPOP; '*' will match rest of string; '?' is a single char wild card
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

dialedNumberVpop 1.3.6.1.4.1.2637.2.1.4004.1.12
Vpop assigned to this Dialed Number
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10240  

organizationNameTable 1.3.6.1.4.1.2637.2.1.4006
Organization Identification Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OrganizationNameEntry

organizationNameEntry 1.3.6.1.4.1.2637.2.1.4006.1
This is the structure of entries in the organizationNameTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  OrganizationNameEntry  

organizationNamePathString 1.3.6.1.4.1.2637.2.1.4006.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

organizationNameRowStatus 1.3.6.1.4.1.2637.2.1.4006.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

organizationNameKeyValue 1.3.6.1.4.1.2637.2.1.4006.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

organizationNameOrganizationName 1.3.6.1.4.1.2637.2.1.4006.1.11
String in the user name field that identifies the organization
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

organizationNameVPOP 1.3.6.1.4.1.2637.2.1.4006.1.12
VPOP associated with this organization name
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10240  

organizationNameTunnelGroup 1.3.6.1.4.1.2637.2.1.4006.1.13
Key of tunnel appropriate tunnel group to use.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1000  

organizationNameInputStyle 1.3.6.1.4.1.2637.2.1.4006.1.111
Specifies the format of the user name field that is received by the CVX from the remote user.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER templateString(0), nameAtOrg(1), nameAtOrgDotDomain(2), orgSlashName(3), orgBslashName(4), orgAnyslashName(5)  

organizationNameInputTemplateString 1.3.6.1.4.1.2637.2.1.4006.1.112
Specifies the template for user name field received from remote user. This option is currently not implemented.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

organizationNameOutputStyle 1.3.6.1.4.1.2637.2.1.4006.1.211
Specifies the format of the user name that is sent to the authentication server (such as a RADIUS server) by the CVX.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER templateString(0), input(1), name(2), nameAtOrg(3), nameAtOrgDotDomain(4), orgSlashName(5), orgBslashName(6)  

organizationNameOutputTemplateString 1.3.6.1.4.1.2637.2.1.4006.1.212
Specifies the template for user name sent to the authentication server. This option is currently not implemented.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

callTypeOverrideTable 1.3.6.1.4.1.2637.2.1.4013
Call Type Override Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CallTypeOverrideEntry

callTypeOverrideEntry 1.3.6.1.4.1.2637.2.1.4013.1
This is the structure of entries in the callTypeOverrideTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CallTypeOverrideEntry  

callTypeOverridePathString 1.3.6.1.4.1.2637.2.1.4013.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

callTypeOverrideRowStatus 1.3.6.1.4.1.2637.2.1.4013.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

callTypeOverrideKeyValue 1.3.6.1.4.1.2637.2.1.4013.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

callTypeOverridePresentedCallType 1.3.6.1.4.1.2637.2.1.4013.1.11
Incoming call type to override
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(1), v110ASYNC600(2), v110ASYNC1200(3), v110ASYNC2400(4), v110ASYNC4800(5), v110ASYNC9600(6), v110ASYNC19200(7), v110ASYNC38400(8), v110SYNC8000(9), v110SYNC16000(10), v110SYNC32000(11), v110SYNC56000(12), v12064K(13), v12056K(14), x64KData(15), x56KData(16), modem(17), voice(18), pIAFS(19)  

callTypeOverrideOverrideCallType 1.3.6.1.4.1.2637.2.1.4013.1.12
Overriding call type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), v110ASYNC600(2), v110ASYNC1200(3), v110ASYNC2400(4), v110ASYNC4800(5), v110ASYNC9600(6), v110ASYNC19200(7), v110ASYNC38400(8), v110SYNC8000(9), v110SYNC16000(10), v110SYNC32000(11), v110SYNC56000(12), v12064K(13), v12056K(14), x64KData(15), x56KData(16), modem(17), voice(18), aLAW(19), disallow(20), uLAW(21), pIAFS(22)  

dVSGatewayTable 1.3.6.1.4.1.2637.2.1.1504
DVS Tunnel Gateway.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DVSGatewayEntry

dVSGatewayEntry 1.3.6.1.4.1.2637.2.1.1504.1
This is the structure of entries in the dVSGatewayTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DVSGatewayEntry  

dVSGatewayPathString 1.3.6.1.4.1.2637.2.1.1504.1.1
The absolute path to where this object resides in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

dVSGatewayRowStatus 1.3.6.1.4.1.2637.2.1.1504.1.2
This object is used to create a new row, or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dVSGatewayKeyValue 1.3.6.1.4.1.2637.2.1.1504.1.3
The Key for this instance of the object in the Resource Manager tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

dVSGatewayGatewayAddress 1.3.6.1.4.1.2637.2.1.1504.1.11
IP address of primary gateway.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dVSGatewayAuthenticationProtocol 1.3.6.1.4.1.2637.2.1.1504.1.12
The authentication protocol between gateway and authentication server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER acp(1), radius(2)  

dVSGatewayAccountingProtocol 1.3.6.1.4.1.2637.2.1.1504.1.13
The accounting protocol between gateway and authentication server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER acp(1), radius(2)  

dVSGatewayAuthenticationType 1.3.6.1.4.1.2637.2.1.1504.1.14
Defines the type of authentication to use when opening the tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), kmd5(1)  

dVSGatewayAuthenticationMode 1.3.6.1.4.1.2637.2.1.1504.1.15
Defines where the mode of authentication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), prefsuffix(1)  

dVSGatewayAuthenticationLocation 1.3.6.1.4.1.2637.2.1.1504.1.16
Defines where the to do second phase authentication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), local(1), remote(2)  

dVSGatewayAuthenticationString 1.3.6.1.4.1.2637.2.1.1504.1.17
The key used for authentication.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

dVSGatewayRetransmitTimeout 1.3.6.1.4.1.2637.2.1.1504.1.18
The time between MIP retransmit requests.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..15  

dVSGatewayMaxRetransmits 1.3.6.1.4.1.2637.2.1.1504.1.19
The maximum number of retransmits before trying the backup gateway.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10  

dVSGatewayRenewalTime 1.3.6.1.4.1.2637.2.1.1504.1.20
The time between registration renewal requests.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 60..900  

dVSGatewayTgHardwareType 1.3.6.1.4.1.2637.2.1.1504.1.21
The type of net between the gateway the the CPE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), serial(1), ppp(2), frelay(3)  

dVSGatewayTgHardwareAddressLength 1.3.6.1.4.1.2637.2.1.1504.1.22
The length of the hardware address in octets for CPE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..20  

dVSGatewayTgHardwareAddress 1.3.6.1.4.1.2637.2.1.1504.1.23
The hardware address for the CPE ,either hex or decimal.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

dVSGatewayPrimaryAuthenticationServerAddress 1.3.6.1.4.1.2637.2.1.1504.1.24
IP address of authentication server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dVSGatewayPrimaryAccountingServerAddress 1.3.6.1.4.1.2637.2.1.1504.1.25
IP address of accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dVSGatewaySecondaryAuthenticationServerAddress 1.3.6.1.4.1.2637.2.1.1504.1.26
IP address of authentication server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dVSGatewaySecondaryAccountingServerAddress 1.3.6.1.4.1.2637.2.1.1504.1.27
IP address of accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dVSGatewayUserName 1.3.6.1.4.1.2637.2.1.1504.1.28
User name used when attempting to authenticate with the remote peer
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

dVSGatewaySecurityParameterIndex 1.3.6.1.4.1.2637.2.1.1504.1.29
Used to indicate the security profile.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

dVSGatewayIPTimeToLive 1.3.6.1.4.1.2637.2.1.1504.1.30
The time to live value for the Outer IP header.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

dVSGatewayRipSourceAddress 1.3.6.1.4.1.2637.2.1.1504.1.31
The source address of RIP packets from the GW.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dVSGatewayRipLimit 1.3.6.1.4.1.2637.2.1.1504.1.32
The maximum number of RIP packets from the GW.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

dVSGatewayRipTimeout 1.3.6.1.4.1.2637.2.1.1504.1.33
The interval between RIP packets from the GW.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..360  

dVSGatewayDhcpEnable 1.3.6.1.4.1.2637.2.1.1504.1.40
Specifies whether dhcp is enabled or not
Status: current Access: read-create
OBJECT-TYPE    
  Boolean  

dVSGatewayDhcpPrefServerAddr 1.3.6.1.4.1.2637.2.1.1504.1.41
IP address of primary dhcp server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dVSGatewayDhcpPrefServerAddr2 1.3.6.1.4.1.2637.2.1.1504.1.42
IP address of secondary dhcp server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress