APSLB-MIB
File:
APSLB-MIB.mib (10061 bytes)
Imported modules
Imported symbols
Defined Values
| apSLBModule |
1.3.6.1.4.1.9148.3.11 |
| The Session Load Balancer MIB for Acme Packet. |
| MODULE-IDENTITY |
|
|
|
| apSLBGroups |
1.3.6.1.4.1.9148.3.11.4.1 |
| OBJECT IDENTIFIER |
|
|
|
| apSLBStatsEndpointsDenied |
1.3.6.1.4.1.9148.3.11.1.1.2 |
| Number of endpoints denied by the SLB because the
system has reached the maximum endpoint capacity. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| apSLBEndpointCapacity |
1.3.6.1.4.1.9148.3.11.1.1.3 |
| The maximum number of endpoints allowed on the SLB.
This value is based on the installed SLB license(s). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| apSLBStatsUntrustedEndpointsDenied |
1.3.6.1.4.1.9148.3.11.1.1.8 |
| The number of untrusted endpoints denied by the SLB due
to the total number of untrusted endpoints exceeding the
configured maximum allowed. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| apSLBStatsUntrustedEndpointsAgedOut |
1.3.6.1.4.1.9148.3.11.1.1.9 |
| The number of untrusted endpoints aged out of the
system because they were not authenticated within the
configured grace period. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| apSLBUntrustedEndpointCapacity |
1.3.6.1.4.1.9148.3.11.1.1.10 |
| The maximum number of untrusted endpoints allowed on the SLB.
This value is a configured percentage of the maximum endpoint
capacity of the system. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| apSLBEndpointCapacityThresholdTrap |
1.3.6.1.4.1.9148.3.11.3.0.1 |
| The trap will be generated when the number of endpoints on the SLB
exceeds the configured threshold. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| apSLBEndpointCapacityThresholdClearTrap |
1.3.6.1.4.1.9148.3.11.3.0.2 |
| The trap will be generated when the number of endpoints on the SLB
falls below the configured threshold. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| apSLBUntrustedEndpointCapacityThresholdTrap |
1.3.6.1.4.1.9148.3.11.3.0.3 |
| The trap will be generated when the number of untrusted endpoints
on the SLB exceeds the configured threshold. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| apSLBUntrustedEndpointCapacityThresholdClearTrap |
1.3.6.1.4.1.9148.3.11.3.0.4 |
| The trap will be generated when the number of untrusted endpoints
on the SLB falls below the configured threshold. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| apSLBEndpointCapacityGroup |
1.3.6.1.4.1.9148.3.11.4.1.1 |
| Objects for monitoring SLB endpoint capacity. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|