APPLETALK-MIB

File: APPLETALK-MIB.mib (105916 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

Counter IpAddress TimeTicks
DisplayString mib-2 OBJECT-TYPE

Defined Types

ATNetworkNumber  
OCTET STRING Size(2)    

DdpNodeAddress  
OCTET STRING Size(3)    

DdpSocketAddress  
OCTET STRING Size(4)    

ATName  
OCTET STRING Size(0..32)    

LlapEntry  
SEQUENCE    
  llapIfIndex INTEGER
  llapInPkts Counter
  llapOutPkts Counter
  llapInNoHandlers Counter
  llapInLengthErrors Counter
  llapInErrors Counter
  llapCollisions Counter
  llapDefers Counter
  llapNoDataErrors Counter
  llapRandomCTSErrors Counter
  llapFCSErrors Counter

AarpEntry  
SEQUENCE    
  aarpIfIndex INTEGER
  aarpPhysAddress OCTET STRING
  aarpNetAddress DdpNodeAddress
  aarpStatus INTEGER

AtportEntry  
SEQUENCE    
  atportIndex INTEGER
  atportDescr DisplayString
  atportType INTEGER
  atportNetStart ATNetworkNumber
  atportNetEnd ATNetworkNumber
  atportNetAddress DdpNodeAddress
  atportStatus INTEGER
  atportNetConfig INTEGER
  atportZoneConfig INTEGER
  atportZoneDefault ATName
  atportIfIndex INTEGER
  atportNetFrom DdpNodeAddress
  atportZoneFrom DdpNodeAddress
  atportInPkts Counter
  atportOutPkts Counter
  atportHome INTEGER
  atportCurrentZone ATName
  atportConflictPhysAddr OCTET STRING

AtportZoneEntry  
SEQUENCE    
  atportZonePort INTEGER
  atportZoneName ATName Size(1..32)
  atportZoneStatus INTEGER

DdpListenerEntry  
SEQUENCE    
  ddpListenerAddress DdpSocketAddress
  ddpListenerInPkts Counter
  ddpListenerStatus INTEGER

DdpForwardingEntry  
SEQUENCE    
  ddpForwardingNetEnd ATNetworkNumber
  ddpForwardingNetStart ATNetworkNumber
  ddpForwardingNextHop OCTET STRING
  ddpForwardingProto OBJECT IDENTIFIER
  ddpForwardingModifiedTime TimeTicks
  ddpForwardingUseCounts Counter
  ddpForwardingPort INTEGER

RtmpEntry  
SEQUENCE    
  rtmpRangeStart ATNetworkNumber
  rtmpRangeEnd ATNetworkNumber
  rtmpNextHop OCTET STRING
  rtmpType INTEGER
  rtmpPort INTEGER
  rtmpHops INTEGER
  rtmpState INTEGER

KipEntry  
SEQUENCE    
  kipNetStart ATNetworkNumber
  kipNetEnd ATNetworkNumber
  kipNextHop IpAddress
  kipHopCount INTEGER
  kipBCastAddr IpAddress
  kipCore INTEGER
  kipType INTEGER
  kipState INTEGER
  kipShare INTEGER
  kipFrom IpAddress

ZipEntry  
SEQUENCE    
  zipZoneName ATName
  zipZoneIndex INTEGER
  zipZoneNetStart ATNetworkNumber
  zipZoneNetEnd ATNetworkNumber
  zipZoneState INTEGER
  zipZoneFrom OCTET STRING
  zipZonePort INTEGER

ZipRouterNetInfoEntry  
SEQUENCE    
  zipInGetNetInfos Counter
  zipOutGetNetInfoReplies Counter
  zipZoneOutInvalids Counter
  zipAddressInvalids Counter

ZipNetInfoEntry  
SEQUENCE    
  zipOutGetNetInfos Counter
  zipInGetNetInfoReplies Counter
  zipZoneInInvalids Counter

NbpEntry  
SEQUENCE    
  nbpIndex INTEGER
  nbpObject ATName Size(1..32)
  nbpType ATName Size(1..32)
  nbpZone ATName
  nbpState INTEGER
  nbpAddress DdpSocketAddress
  nbpEnumerator INTEGER 0..255

AtpListenerEntry  
SEQUENCE    
  atpListenerAddress DdpSocketAddress
  atpListenerStatus INTEGER

PapServerEntry  
SEQUENCE    
  papServerIndex INTEGER
  papServerListeningSocket DdpSocketAddress
  papServerStatus DisplayString
  papServerCompletedJobs Counter
  papServerBusyJobs INTEGER
  papServerFreeJobs INTEGER
  papServerAuthenticationFailures Counter
  papServerAccountingFailures Counter
  papServerGeneralFailures Counter
  papServerState INTEGER
  papServerLastStatusMsg DisplayString

AspConnEntry  
SEQUENCE    
  aspConnLocalAddress DdpSocketAddress
  aspConnRemoteAddress DdpSocketAddress
  aspConnID INTEGER 1..255
  aspConnLastReqNum INTEGER 1..65535
  aspConnServerEnd INTEGER
  aspConnState INTEGER

AdspConnEntry  
SEQUENCE    
  adspConnLocalAddress DdpSocketAddress
  adspConnLocalConnID INTEGER 0..65535
  adspConnRemoteAddress DdpSocketAddress
  adspConnRemoteConnID INTEGER 0..65535
  adspConnState INTEGER

AtportPtoPEntry  
SEQUENCE    
  atportPtoPIndex INTEGER
  atportPtoPProtocol OBJECT IDENTIFIER
  atportPtoPRemoteName DisplayString
  atportPtoPRemoteAddress OCTET STRING
  atportPtoPPortIndex INTEGER
  atportPtoPStatus INTEGER

PerPortEntry  
SEQUENCE    
  perPortAarpInProbes Counter
  perPortAarpOutProbes Counter
  perPortAarpInReqs Counter
  perPortAarpOutReqs Counter
  perPortAarpInRsps Counter
  perPortAarpOutRsps Counter
  perPortDdpInReceives Counter
  perPortDdpInLocalDatagrams Counter
  perPortDdpNoProtocolHandlers Counter
  perPortDdpTooShortErrors Counter
  perPortDdpTooLongErrors Counter
  perPortDdpChecksumErrors Counter
  perPortDdpForwRequests Counter
  perPortRtmpInDataPkts Counter
  perPortRtmpOutDataPkts Counter
  perPortRtmpInRequestPkts Counter
  perPortRtmpRouteDeletes Counter
  perPortZipInZipQueries Counter
  perPortZipInZipReplies Counter
  perPortZipInZipExtendedReplies Counter
  perPortZipZoneConflictErrors Counter
  perPortZipInErrors Counter
  perPortNbpInLookUpRequests Counter
  perPortNbpInLookUpReplies Counter
  perPortNbpInBroadcastRequests Counter
  perPortNbpInForwardRequests Counter
  perPortNbpOutLookUpReplies Counter
  perPortNbpRegistrationFailures Counter
  perPortNbpInErrors Counter
  perPortEchoRequests Counter
  perPortEchoReplies Counter

Defined Values

appletalk 1.3.6.1.2.1.13
OBJECT IDENTIFIER    

llap 1.3.6.1.2.1.13.1
OBJECT IDENTIFIER    

aarp 1.3.6.1.2.1.13.2
OBJECT IDENTIFIER    

atport 1.3.6.1.2.1.13.3
OBJECT IDENTIFIER    

ddp 1.3.6.1.2.1.13.4
OBJECT IDENTIFIER    

rtmp 1.3.6.1.2.1.13.5
OBJECT IDENTIFIER    

kip 1.3.6.1.2.1.13.6
OBJECT IDENTIFIER    

zipRouter 1.3.6.1.2.1.13.7
OBJECT IDENTIFIER    

nbp 1.3.6.1.2.1.13.8
OBJECT IDENTIFIER    

atecho 1.3.6.1.2.1.13.9
OBJECT IDENTIFIER    

atp 1.3.6.1.2.1.13.10
OBJECT IDENTIFIER    

pap 1.3.6.1.2.1.13.11
OBJECT IDENTIFIER    

asp 1.3.6.1.2.1.13.12
OBJECT IDENTIFIER    

adsp 1.3.6.1.2.1.13.13
OBJECT IDENTIFIER    

atportptop 1.3.6.1.2.1.13.14
OBJECT IDENTIFIER    

rtmpStub 1.3.6.1.2.1.13.16
OBJECT IDENTIFIER    

zipEndNode 1.3.6.1.2.1.13.17
OBJECT IDENTIFIER    

perPort 1.3.6.1.2.1.13.18
OBJECT IDENTIFIER    

llapTable 1.3.6.1.2.1.13.1.1
The list of LLAP entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LlapEntry

llapEntry 1.3.6.1.2.1.13.1.1.1
An LLAP entry containing objects for the LocalTalk Link Access Protocol for a particular LocalTalk interface. As an example, an instance of the llapOutPkts object might be named llapOutPks.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LlapEntry  

llapIfIndex 1.3.6.1.2.1.13.1.1.1.1
The LLAP interface to which this entry pertains. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

llapInPkts 1.3.6.1.2.1.13.1.1.1.2
The total number of good data packets received on this LocalTalk interface.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

llapOutPkts 1.3.6.1.2.1.13.1.1.1.3
The total number of data packets transmitted on this LocalTalk interface.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

llapInNoHandlers 1.3.6.1.2.1.13.1.1.1.4
The total number of good packets received on this LocalTalk interface for which there was no protocol handler.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

llapInLengthErrors 1.3.6.1.2.1.13.1.1.1.5
The total number of packets received on this LocalTalk interface whose actual length did not match the length in the header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

llapInErrors 1.3.6.1.2.1.13.1.1.1.6
The total number of packets containing errors received on this LocalTalk interface.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

llapCollisions 1.3.6.1.2.1.13.1.1.1.7
The total number of collisions assumed on this LocalTalk interface due to the lack of a lapCTS reply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

llapDefers 1.3.6.1.2.1.13.1.1.1.8
The total number of times this LocalTalk interface deferred to other packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

llapNoDataErrors 1.3.6.1.2.1.13.1.1.1.9
The total number of times this LocalTalk interface received a lapRTS packet and expected a data packet, but did not receive any data packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

llapRandomCTSErrors 1.3.6.1.2.1.13.1.1.1.10
The total number of times this LocalTalk interface received a lapCTS packet that was not solicited by a lapRTS packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

llapFCSErrors 1.3.6.1.2.1.13.1.1.1.11
The total number of times this LocalTalk interface received a packet with an FCS (Frame Check Sequence) error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aarpTable 1.3.6.1.2.1.13.2.1
The AppleTalk Address Translation Table contains an equivalence of AppleTalk Network Addresses to the link layer physical address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AarpEntry

aarpEntry 1.3.6.1.2.1.13.2.1.1
Each entry contains one AppleTalk Network Address to physical address equivalence. As an example, an instance of the aarpPhysAddress object might be named aarpPhysAddress.1.0.80.234
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AarpEntry  

aarpIfIndex 1.3.6.1.2.1.13.2.1.1.1
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

aarpPhysAddress 1.3.6.1.2.1.13.2.1.1.2
The media-dependent physical address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

aarpNetAddress 1.3.6.1.2.1.13.2.1.1.3
The AppleTalk Network Address corresponding to the media-dependent physical address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DdpNodeAddress  

aarpStatus 1.3.6.1.2.1.13.2.1.1.4
The status of this AARP entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the aarpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant aarpStatus object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

aarpLookups 1.3.6.1.2.1.13.2.2
The number of times the AARP cache for this entity was searched.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aarpHits 1.3.6.1.2.1.13.2.3
The number of times an entry was searched for and found in the AARP cache for this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atportTable 1.3.6.1.2.1.13.3.1
A list of AppleTalk ports for this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtportEntry

atportEntry 1.3.6.1.2.1.13.3.1.1
The description of one of the AppleTalk ports on this entity. As an example, an instance of the atportNetFrom object might be named atportNetFrom.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtportEntry  

atportIndex 1.3.6.1.2.1.13.3.1.1.1
A unique value for each AppleTalk port. Its value is between 1 and the total number of AppleTalk ports. The value for each port must remain constant at least from the re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atportDescr 1.3.6.1.2.1.13.3.1.1.2
A text string containing information about the port. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atportType 1.3.6.1.2.1.13.3.1.1.3
The type of port, distinguished by the protocol immediately below DDP in the protocol stack.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), localtalk(2), ethertalk1(3), ethertalk2(4), tokentalk(5), iptalk(6), serialPPP(7), serialNonstandard(8), virtual(9), fdditalk(10), arctalk(11), smdstalk(12), aurp(13), frameRelay(14), x25(15), ip(16), osi(17), decnetIV(18), arap(19), isdnInThePacketMode(20), nonAppleTalk3Com(21), ipx(22), arns(23), hdlc(24)  

atportNetStart 1.3.6.1.2.1.13.3.1.1.4
The first AppleTalk network address in the range configured for this port. If this port is not a native AppleTalk port, this object shall have the value of two octets of zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATNetworkNumber  

atportNetEnd 1.3.6.1.2.1.13.3.1.1.5
The last AppleTalk network address in the range configured for this port. If the network to which this AppleTalk port is connected is a non-extended network, or if it is not a native AppleTalk port, the value for atportNetEnd shall be two octets of zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATNetworkNumber  

atportNetAddress 1.3.6.1.2.1.13.3.1.1.6
The AppleTalk network address configured for this port. In addition, this value may be used as a hint for an initial node number used during node-finding. If this port is not a native AppleTalk port, this object shall have the value of three octets of zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DdpNodeAddress  

atportStatus 1.3.6.1.2.1.13.3.1.1.7
The configuration status of this port. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry in the atportTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atportStatus object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER routing(1), unconfigured(2), off(3), invalid(4), endNode(5), offDueToConflict(6), other(7)  

atportNetConfig 1.3.6.1.2.1.13.3.1.1.8
The status of the network information for this port. If this port is not a native AppleTalk port, this object shall have the value unconfigured(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER conflictOrientedSeed(1), garnered(2), guessed(3), unconfigured(4), conflictAverseSeed(5), softSeed(6)  

atportZoneConfig 1.3.6.1.2.1.13.3.1.1.9
The status of the zone information for this port. If this port is not a native AppleTalk port, this object shall have the value unconfigured(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER conflictOrientedSeed(1), garnered(2), guessed(3), unconfigured(4), conflictAverseSeed(5), softSeed(6)  

atportZoneDefault 1.3.6.1.2.1.13.3.1.1.10
The name of the default zone for this port. If this port only has one zone, that zone is represented here. If this port is not a native AppleTalk port, this object shall contain an octet string of zero length. When this value is changed in a router, the router must send a zipNotify packet on the associated network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATName  

atportIfIndex 1.3.6.1.2.1.13.3.1.1.11
The physical interface associated with this AppleTalk port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atportNetFrom 1.3.6.1.2.1.13.3.1.1.12
When atportNetConfig is set to garnered(2), this variable contains the DDP address of an entity from which the AppleTalk network number was garnered. When atportNetConfig is set to conflictOrientedSeed(1), conflictAverseSeed(5), or softSeed(6), this variable contains the DDP address of an entity which confirmed or supplied our AppleTalk network number, for example by replying to a ZIP GetNetInfo request. If atportNetConfig is set to guessed(3) or unconfigured(4), or if the entity has not received any network number confirmation, this variable should be set to three octets of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DdpNodeAddress  

atportZoneFrom 1.3.6.1.2.1.13.3.1.1.13
When atportZoneConfig is set to garnered(2), this variable contains the DDP address of an entity from which the AppleTalk zone list was garnered. When atportZoneConfig is set to conflictOrientedSeed(1), conflictAverseSeed(5), or softSeed(6), this variable contains the DDP address of an entity which confirmed or supplied our AppleTalk zone information, for example by replying to a ZIP GetNetInfo request or a ZIP Query. If atportZoneConfig is set to guessed(3) or unconfigured(4), or if the entity has not received any zone confirmation, this variable should be set to three octets of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DdpNodeAddress  

atportInPkts 1.3.6.1.2.1.13.3.1.1.14
The number of packets received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atportOutPkts 1.3.6.1.2.1.13.3.1.1.15
The number of packets transmitted by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atportHome 1.3.6.1.2.1.13.3.1.1.16
An indication of whether or not the entity is homed on this port, that is to say, a port on which the entity could perform NBP registrations for services that it chooses to advertise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER home(1), notHome(2)  

atportCurrentZone 1.3.6.1.2.1.13.3.1.1.17
The current zone for the port. In general, this is the zone name in which services on this port will be registered. If this port is not a native AppleTalk port, this object shall contain an octet string of zero length. Note that modifications to this object do not affect the nbpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATName  

atportConflictPhysAddr 1.3.6.1.2.1.13.3.1.1.18
The link-layer address of a device which caused this entity to set atportStatus to offDueToConflict(6). If this address is not available, or if the entity has not set atportStatus to offDueToConflict, this object shall be a zero length OCTET STRING.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

atportZoneTable 1.3.6.1.2.1.13.3.2
The table of zone information for non-default zones on ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtportZoneEntry

atportZoneEntry 1.3.6.1.2.1.13.3.2.1
An entry of zone information for a port. As an example, an instance of the atportZoneStatus object might be named atportZoneStatus.2.8.84.119.105.108.105.103.104.116
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtportZoneEntry  

atportZonePort 1.3.6.1.2.1.13.3.2.1.1
An integer representing the port to which this zone belongs. The port identified by a particular value of this object is the same port as identified by the same value of atportIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

atportZoneName 1.3.6.1.2.1.13.3.2.1.2
A zone name configured for the AppleTalk port referred to in the corresponding entry of atportZonePort. When this value is changed in a router, the router must send a zipNotify packet on the associated network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ATName Size(1..32)  

atportZoneStatus 1.3.6.1.2.1.13.3.2.1.3
The status of this zone entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the atportZoneTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atportZoneStatus object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

ddpOutRequests 1.3.6.1.2.1.13.4.1
The total number of DDP datagrams which were supplied to DDP by local DDP clients in requests for transmission. Note that this counter does not include any datagrams counted in ddpForwRequests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpOutShorts 1.3.6.1.2.1.13.4.2
The total number of short DDP datagrams which were transmitted from this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpOutLongs 1.3.6.1.2.1.13.4.3
The total number of long DDP datagrams which were transmitted from this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpInReceives 1.3.6.1.2.1.13.4.4
The total number of input datagrams received by DDP, including those received in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpInLocalDatagrams 1.3.6.1.2.1.13.4.6
The total number of input DDP datagrams for which this entity was their final DDP destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpNoProtocolHandlers 1.3.6.1.2.1.13.4.7
The total number of DDP datagrams addressed to this entity that were addressed to an upper layer protocol for which no protocol handler existed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpTooShortErrors 1.3.6.1.2.1.13.4.9
The total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpTooLongErrors 1.3.6.1.2.1.13.4.10
The total number of input DDP datagrams dropped because they exceeded the maximum DDP datagram size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpShortDDPErrors 1.3.6.1.2.1.13.4.12
The total number of input DDP datagrams dropped because this entity was not their final destination and their type was short DDP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpChecksumErrors 1.3.6.1.2.1.13.4.14
The total number of input DDP datagrams for which this DDP entity was their final destination, and which were dropped because of a checksum error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpListenerTable 1.3.6.1.2.1.13.4.15
The ddpListenerTable stores information for each DDP socket that has a listener.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DdpListenerEntry

ddpListenerEntry 1.3.6.1.2.1.13.4.15.1
This ddpListenerEntry contains information about a particular socket that has a socket listener. As an example, an instance of the ddpListenerStatus object might be named ddpListenerStatus.0.80.220.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpListenerEntry  

ddpListenerAddress 1.3.6.1.2.1.13.4.15.1.1
The DDP address that this socket listener is bound to. If this socket listener isn't bound to a particular address, for instance if it is intended for all interfaces, this object shall have the value of three octets of zero followed by one octet of socket number. The socket number must not equal zero.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpSocketAddress  

ddpListenerInPkts 1.3.6.1.2.1.13.4.15.1.2
The number of packets received for this listener.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpListenerStatus 1.3.6.1.2.1.13.4.15.1.3
The status of this socket listener. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ddpListenerTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ddpListenerStatus object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

ddpForwRequests 1.3.6.1.2.1.13.4.5
The number of input datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpOutNoRoutes 1.3.6.1.2.1.13.4.8
The total number of DDP datagrams dropped because a route could not be found to their final destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpBroadcastErrors 1.3.6.1.2.1.13.4.11
The total number of input DDP datagrams dropped because this entity was not their final destination and they were addressed to the link level broadcast.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpHopCountErrors 1.3.6.1.2.1.13.4.13
The total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpForwardingTable 1.3.6.1.2.1.13.4.16
A table of forwarding entries for DDP. This table contains a route for each AppleTalk network currently known to the entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DdpForwardingEntry

ddpForwardingEntry 1.3.6.1.2.1.13.4.16.1
A forwarding entry for a particular AppleTalk network. As an example, an instance of the ddpForwardingPort object might be named ddpForwardingPort.0.90
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpForwardingEntry  

ddpForwardingNetEnd 1.3.6.1.2.1.13.4.16.1.1
The last network number in the network range matched by this forwarding entry. This will not be zero even if this corresponds to a non-extended net.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ATNetworkNumber  

ddpForwardingNetStart 1.3.6.1.2.1.13.4.16.1.2
The first network number in the network range matched by this forwarding entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ATNetworkNumber  

ddpForwardingNextHop 1.3.6.1.2.1.13.4.16.1.3
The next hop in the route to this entry's destination network. The format of this address can be determined by examinating the atportType corresponding to this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ddpForwardingProto 1.3.6.1.2.1.13.4.16.1.4
The routing mechanism by which this route was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ddpForwardingModifiedTime 1.3.6.1.2.1.13.4.16.1.5
The value of sysUpTime at the time of the last modification to this entry. The initial value of ddpForwardingModified time shall be the value of sysUpTime at the time the entry is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

ddpForwardingUseCounts 1.3.6.1.2.1.13.4.16.1.6
The number of times this entry has been used to route a packet to the destination network. Note that this counter is not cleared when the corresponding ddpForwardingNextHop variable changes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ddpForwardingPort 1.3.6.1.2.1.13.4.16.1.7
The AppleTalk port through which ddpForwardingNextHop is reached. The interface identified by a particular value of this variable is the same interface as identified by the same value of atportIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ddpForwProtoOids 1.3.6.1.2.1.13.4.17
OBJECT IDENTIFIER    

rtmpRoutingProto 1.3.6.1.2.1.13.4.17.1
OBJECT IDENTIFIER    

kipRoutingProto 1.3.6.1.2.1.13.4.17.2
OBJECT IDENTIFIER    

ddpForwardingTableOverflows 1.3.6.1.2.1.13.4.18
The number of times the entity attempted to add an entry to the forwarding table but failed due to overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpTable 1.3.6.1.2.1.13.5.1
A list of Routing Table Maintenance Protocol entries for this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RtmpEntry

rtmpEntry 1.3.6.1.2.1.13.5.1.1
The route entry to a particular network range. As an example, an instance of the rtmpPort object might be named rtmpPort.0.80
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RtmpEntry  

rtmpRangeStart 1.3.6.1.2.1.13.5.1.1.1
The first DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ATNetworkNumber  

rtmpRangeEnd 1.3.6.1.2.1.13.5.1.1.2
The last DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order. If the network to which this routing entry pertains is a non-extended network, the value for rtmpRangeEnd shall be two octets of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ATNetworkNumber  

rtmpNextHop 1.3.6.1.2.1.13.5.1.1.3
The next internet router in the route to this entry's destination network. The format of this address can be determined by examinating the atportType corresponding to this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rtmpType 1.3.6.1.2.1.13.5.1.1.4
The type of network over which this route points.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), appletalk(2), serialPPP(3), serialNonstandard(4)  

rtmpPort 1.3.6.1.2.1.13.5.1.1.5
The AppleTalk port over which this route points. The interface identified by a particular value of this variable is the same interface as identified by the same value of atportIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rtmpHops 1.3.6.1.2.1.13.5.1.1.6
The number of hops required to reach the destination network to which this routing entry pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rtmpState 1.3.6.1.2.1.13.5.1.1.7
The status of the information contained in this route entry. Setting this object to the value invalid(5) has the effect of invalidating the corresponding entry in the rtmpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant rtmpState object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER good(1), suspect(2), badZero(3), badOne(4), invalid(5)  

rtmpInDataPkts 1.3.6.1.2.1.13.5.2
A count of the number of good RTMP data packets received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpOutDataPkts 1.3.6.1.2.1.13.5.3
A count of the number of RTMP packets sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpInRequestPkts 1.3.6.1.2.1.13.5.4
A count of the number of good RTMP Request packets received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpNextIREqualChanges 1.3.6.1.2.1.13.5.5
A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was equal to the current hop count for a particular network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpNextIRLessChanges 1.3.6.1.2.1.13.5.6
A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was less than the current hop count for a particular network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpRouteDeletes 1.3.6.1.2.1.13.5.7
A count of the number of times RTMP deletes a route because it was aged out of the table. This can help to detect routing problems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpRoutingTableOverflows 1.3.6.1.2.1.13.5.8
The number of times RTMP attempted to add a route to the RTMP table but failed due to lack of space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpOutRequestPkts 1.3.6.1.2.1.13.16.1
A count of the number of RTMP Request packets sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpInVersionMismatches 1.3.6.1.2.1.13.16.2
A count of the number of RTMP packets received by this entity that were rejected due to a version mismatch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rtmpInErrors 1.3.6.1.2.1.13.16.3
A count of the number of RTMP packets received by this entity that were rejected for an error other than version mismatch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

kipTable 1.3.6.1.2.1.13.6.1
The table of routing information for KIP networks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KipEntry

kipEntry 1.3.6.1.2.1.13.6.1.1
An entry in the routing table for KIP networks. As an example, an instance of the kipCore object might be named kipCore.0.80
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KipEntry  

kipNetStart 1.3.6.1.2.1.13.6.1.1.1
The first AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ATNetworkNumber  

kipNetEnd 1.3.6.1.2.1.13.6.1.1.2
The last AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a non-extended network, the value for kipNetEnd shall be two octets of zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATNetworkNumber  

kipNextHop 1.3.6.1.2.1.13.6.1.1.3
The IP address of the next hop in the route to this entry's destination network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

kipHopCount 1.3.6.1.2.1.13.6.1.1.4
The number of hops required to reach the destination network to which this entry pertains.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

kipBCastAddr 1.3.6.1.2.1.13.6.1.1.5
The form of the IP address used to broadcast on this network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

kipCore 1.3.6.1.2.1.13.6.1.1.6
The status of kipNextHop as a core gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER core(1), notcore(2)  

kipType 1.3.6.1.2.1.13.6.1.1.7
The type of the entity that this route points to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER kipRouter(1), net(2), host(3), other(4), async(5)  

kipState 1.3.6.1.2.1.13.6.1.1.8
The state of this network entry. Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the kipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant kipState object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER configured(1), learned(2), invalid(3)  

kipShare 1.3.6.1.2.1.13.6.1.1.9
If the information in this entry is propagated to other routers as part of the AA routing protocol, the value of this variable is equal to shared(1). Otherwise its value is private(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER shared(1), private(2)  

kipFrom 1.3.6.1.2.1.13.6.1.1.10
The IP address from which the routing entry was learned via the AA protocol. If this entry was not created via the AA protocol, it should contain IP address 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

zipTable 1.3.6.1.2.1.13.7.1
The table of zone information for reachable AppleTalk networks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZipEntry

zipEntry 1.3.6.1.2.1.13.7.1.1
An entry of zone information for a particular zone and network combination. As an example, an instance of the zipZoneState object might be named zipZoneState.0.80.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ZipEntry  

zipZoneName 1.3.6.1.2.1.13.7.1.1.1
The zone name of this entry. This is stored in Mac ASCII format. If the full zone list for the entry is not known, the value for zipZoneName shall be a zero length octet string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ATName  

zipZoneIndex 1.3.6.1.2.1.13.7.1.1.2
An integer that is unique to the zipZoneName that is present in this entry. For any given zone name, every zipEntry that has an equal zone name will have the same zipZoneIndex. When a zone name is discovered which is not currently in the table, it will be assigned an index greater than any previously assigned index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

zipZoneNetStart 1.3.6.1.2.1.13.7.1.1.3
The network that starts the range for this entry. This address is a two octet DDP network address in network byte order.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ATNetworkNumber  

zipZoneNetEnd 1.3.6.1.2.1.13.7.1.1.4
The network that ends the range for this entry. This address is a two octet DDP network address in network byte order. If the network to which this zip entry pertains is a non-extended network, the value for zipZoneNetEnd shall be two octets of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ATNetworkNumber  

zipZoneState 1.3.6.1.2.1.13.7.1.1.5
The state of this zip entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the zipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant zipZoneState object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

zipZoneFrom 1.3.6.1.2.1.13.7.1.1.6
The address from which this zone name to network number mapping was learned. The format of this address can be determined by examining the atportType corresponding to this entry. When this mapping is learned from the entity itself, this object shall have the value of three octets of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

zipZonePort 1.3.6.1.2.1.13.7.1.1.7
The AppleTalk port through which this zone name to network number mapping was learned. The interface identified by a particular value of this variable is the same interface as identified by the same value of atportIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

zipInZipQueries 1.3.6.1.2.1.13.7.2
The number of ZIP Queries received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipInZipReplies 1.3.6.1.2.1.13.7.3
The number of ZIP Replies received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipInZipExtendedReplies 1.3.6.1.2.1.13.7.4
The number of ZIP Extended Replies received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipZoneConflictErrors 1.3.6.1.2.1.13.7.5
The number of times a conflict has been detected between this entity's zone information and another entity's zone information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipInObsoletes 1.3.6.1.2.1.13.7.6
The number of ZIP Takedown or ZIP Bringup packets received by this entity. Note that as the ZIP Takedown and ZIP Bringup packets have been obsoleted, the receipt of one of these packets indicates that a node sent it in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipRouterNetInfoTable 1.3.6.1.2.1.13.7.7
The table of Net Info packets received by each port on this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZipRouterNetInfoEntry

zipRouterNetInfoEntry 1.3.6.1.2.1.13.7.7.1
The description of the Net Info packets received on a particular port on this entity. One such entry shall exist for each atport on this router entity. As an example, an instance of the zipInGetNetInfos object might be named zipInGetNetInfos.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ZipRouterNetInfoEntry  

zipInGetNetInfos 1.3.6.1.2.1.13.7.7.1.1
The number of ZIP GetNetInfo packets received on this port by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipOutGetNetInfoReplies 1.3.6.1.2.1.13.7.7.1.2
The number of ZIP GetNetInfo Reply packets sent out this port by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipZoneOutInvalids 1.3.6.1.2.1.13.7.7.1.3
The number of times this entity has sent a ZIP GetNetInfo Reply with the zone invalid bit set in response to a GetNetInfo Request with an invalid zone name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipAddressInvalids 1.3.6.1.2.1.13.7.7.1.4
The number of times this entity had to broadcast a ZIP GetNetInfo Reply because the GetNetInfo Request had an invalid address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipNetInfoTable 1.3.6.1.2.1.13.17.1
The table of Net Info packets received by each port on this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZipNetInfoEntry

zipNetInfoEntry 1.3.6.1.2.1.13.17.1.1
The description of the Net Info packets received on a particular port on this entity. One such entry shall exist for each atport on this entity. As an example, an instance of the zipOutGetNetInfos object might be named zipOutGetNetInfos.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ZipNetInfoEntry  

zipOutGetNetInfos 1.3.6.1.2.1.13.17.1.1.1
The number of ZIP GetNetInfo packets sent out this port by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipInGetNetInfoReplies 1.3.6.1.2.1.13.17.1.1.2
The number of ZIP GetNetInfo Reply packets received on this port by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipZoneInInvalids 1.3.6.1.2.1.13.17.1.1.3
The number of times this entity has received a ZIP GetNetInfo Reply with the zone invalid bit set because the corresponding GetNetInfo Request had an invalid zone name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

zipInErrors 1.3.6.1.2.1.13.17.2
The number of ZIP packets received by this entity that were rejected for any error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nbpTable 1.3.6.1.2.1.13.8.1
The table of NBP services registered on this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NbpEntry

nbpEntry 1.3.6.1.2.1.13.8.1.1
The description of an NBP service registered on this entity. As an example, an instance of the nbpZone object might be named nbpZone.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NbpEntry  

nbpIndex 1.3.6.1.2.1.13.8.1.1.1
The index of this NBP entry. This index is unique with respect to the indexes of all other NBP entries, and shall remain constant throughout the lifetime of this object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nbpObject 1.3.6.1.2.1.13.8.1.1.2
The name of the service described by this entity. When this variable is changed, the entity should perform an NBP registration using the new nbpObject.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATName Size(1..32)  

nbpType 1.3.6.1.2.1.13.8.1.1.3
The type of the service described by this entity. When this variable is changed, the entity should perform an NBP registration using the new nbpType.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATName Size(1..32)  

nbpZone 1.3.6.1.2.1.13.8.1.1.4
The zone the service described by this entity is registered in. This must be the actual zone name, without any wildcard characters. When this variable is changed, the entity should perform an NBP registration using the new nbpZone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ATName  

nbpState 1.3.6.1.2.1.13.8.1.1.5
The state of this NBP entry. When the registration for an entry in the nbpTable fails, it is an implementation-specific matter as to how long the entry will remain in the registrationFailed(3) state before moving to the invalid(4) state. Note that the entry may pass immediately from the registrationFailed state to the invalid state. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry in the nbpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nbpState object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), registering(2), registrationFailed(3), invalid(4)  

nbpAddress 1.3.6.1.2.1.13.8.1.1.6
The DDP network, node, and socket number of this entity. If this is unspecified, for instance if the registration is on all ports of a multiport device, this object shall have the value of three octets of zero, followed by one octet of socket number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DdpSocketAddress  

nbpEnumerator 1.3.6.1.2.1.13.8.1.1.7
The enumerator assigned to this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nbpInLookUpRequests 1.3.6.1.2.1.13.8.2
The number of NBP LookUp Requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nbpInLookUpReplies 1.3.6.1.2.1.13.8.3
The number of NBP LookUp Replies received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nbpInBroadcastRequests 1.3.6.1.2.1.13.8.4
The number of NBP Broadcast Requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nbpInForwardRequests 1.3.6.1.2.1.13.8.5
The number of NBP Forward Requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nbpOutLookUpReplies 1.3.6.1.2.1.13.8.6
The number of NBP LookUp Replies sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nbpRegistrationFailures 1.3.6.1.2.1.13.8.7
The number of times this node experienced a failure in attempting to register an NBP entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nbpInErrors 1.3.6.1.2.1.13.8.8
The number of NBP packets received by this entity that were rejected for any error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atechoRequests 1.3.6.1.2.1.13.9.1
The number of AppleTalk Echo requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atechoReplies 1.3.6.1.2.1.13.9.2
The number of AppleTalk Echo replies sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atechoOutRequests 1.3.6.1.2.1.13.9.3
The count of AppleTalk Echo requests sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atechoInReplies 1.3.6.1.2.1.13.9.4
The count of AppleTalk Echo replies received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atpInPkts 1.3.6.1.2.1.13.10.1
The number of ATP packets received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atpOutPkts 1.3.6.1.2.1.13.10.2
The number of ATP packets sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atpTRequestRetransmissions 1.3.6.1.2.1.13.10.3
The number of times that a timeout occurred and a Transaction Request packet needed to be retransmitted by this host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atpTResponseRetransmissions 1.3.6.1.2.1.13.10.4
The number of times a timeout was detected and a Transaction Response packet needed to be retransmitted by this host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atpReleaseTimerExpiredCounts 1.3.6.1.2.1.13.10.5
The number of times the release timer expired, as a result of which a Request Control Block had to be deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atpRetryCountExceededs 1.3.6.1.2.1.13.10.6
The number of times the retry count was exceeded, and an error was returned to the client of ATP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atpListenerTable 1.3.6.1.2.1.13.10.7
The atpListenerTable stores information for each ATP socket that has a listener.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtpListenerEntry

atpListenerEntry 1.3.6.1.2.1.13.10.7.1
This atpListenerEntry contains information about a particular socket that has a socket listener. As an example, an instance of the atpListenerStatus object might be named atpListenerStatus.0.80.220.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtpListenerEntry  

atpListenerAddress 1.3.6.1.2.1.13.10.7.1.1
The DDP address that this socket listener is bound to. If this socket listener isn't bound to a particular address, for instance if it is intended for all interfaces, this object shall have the value of three octets of zero followed by one octet of socket number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpSocketAddress  

atpListenerStatus 1.3.6.1.2.1.13.10.7.1.2
The status of this socket. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the atpListenerTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atpListenerStatus object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

papInOpenConns 1.3.6.1.2.1.13.11.1
The number of PAP Open Connection requests received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papOutOpenConns 1.3.6.1.2.1.13.11.2
The number of PAP Open Connection requests sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papInDatas 1.3.6.1.2.1.13.11.3
The number of PAP Data messages received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papOutDatas 1.3.6.1.2.1.13.11.4
The number of PAP Data messages sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papInCloseConns 1.3.6.1.2.1.13.11.5
The number of PAP Close Connection requests received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papOutCloseConns 1.3.6.1.2.1.13.11.6
The number of PAP Close Connection requests sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papTickleTimeoutCloses 1.3.6.1.2.1.13.11.7
The number of times the PAP entity on this node closed a connection because it didn't receive a Tickle message before its timer expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papServerTable 1.3.6.1.2.1.13.11.8
A list of servers on this entity that are accessible through the Printer Access Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PapServerEntry

papServerEntry 1.3.6.1.2.1.13.11.8.1
A set of information about a particular PAP server's configuration and performance. As an example, an instance of the papServerStatus object might be named papServerStatus.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PapServerEntry  

papServerIndex 1.3.6.1.2.1.13.11.8.1.1
An unique value for each Printer Access Protocol Server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

papServerListeningSocket 1.3.6.1.2.1.13.11.8.1.2
The Server Listening Socket that this PAP server is listening on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DdpSocketAddress  

papServerStatus 1.3.6.1.2.1.13.11.8.1.3
The status string of this server. This is the message as it would appear in a PAP Status Reply from this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

papServerCompletedJobs 1.3.6.1.2.1.13.11.8.1.4
The number of jobs that have been accepted and successfully executed by this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papServerBusyJobs 1.3.6.1.2.1.13.11.8.1.5
The number of GetNextJob calls that have accepted and are currently executing a job.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

papServerFreeJobs 1.3.6.1.2.1.13.11.8.1.6
The minimum number of GetNextJob calls that are currently waiting for a job.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

papServerAuthenticationFailures 1.3.6.1.2.1.13.11.8.1.7
The number of times this PAP server rejected a job because the job was not correctly authenticated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papServerAccountingFailures 1.3.6.1.2.1.13.11.8.1.8
The number of times this PAP server rejected a job because the job did not fit some accounting rule, such as exceeding a quota.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papServerGeneralFailures 1.3.6.1.2.1.13.11.8.1.9
The number of times this PAP server rejected a job for some reason other than authentication or accounting failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

papServerState 1.3.6.1.2.1.13.11.8.1.10
The state of this PAP Server entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the papServerTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant papServerState object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

papServerLastStatusMsg 1.3.6.1.2.1.13.11.8.1.11
The last status message that was transmitted by this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aspInputTransactions 1.3.6.1.2.1.13.12.1
The number of ASP requests and replies received by this entity. Note that this is not necessarily the number of packets containing ASP transactions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspOutputTransactions 1.3.6.1.2.1.13.12.2
The number of ASP requests and replies sent by this entity. Note that this is not necessarily the number of packets containing ASP transactions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspInOpenSessions 1.3.6.1.2.1.13.12.3
The number of ASP Open Session requests and replies received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspOutOpenSessions 1.3.6.1.2.1.13.12.4
The number of ASP Open Session requests and replies sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspInCloseSessions 1.3.6.1.2.1.13.12.5
The number of ASP Close Session requests and replies received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspOutCloseSessions 1.3.6.1.2.1.13.12.6
The number of ASP Close Session requests and replies sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspNoMoreSessionsErrors 1.3.6.1.2.1.13.12.7
The number of times an error condition was returned because this server implementation could not support another session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspTickleTimeOutCloses 1.3.6.1.2.1.13.12.8
The number of times the ASP entity on this node closed a connection because it didn't receive any messages from the remote end before its timer expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

aspConnTable 1.3.6.1.2.1.13.12.9
A list of ASP connections on this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AspConnEntry

aspConnEntry 1.3.6.1.2.1.13.12.9.1
A set of information describing an ASP connection. As an example, an instance of the aspConnState object might be named aspConnState.0.80.220.135.0.80.239.119.12
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AspConnEntry  

aspConnLocalAddress 1.3.6.1.2.1.13.12.9.1.1
The local address of this ASP connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpSocketAddress  

aspConnRemoteAddress 1.3.6.1.2.1.13.12.9.1.2
The remote address of this ASP connection. If this entry is in the listening mode, this object shall have a value of four octets of zero.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpSocketAddress  

aspConnID 1.3.6.1.2.1.13.12.9.1.3
The remote Connection ID of this ASP connection. If this entry is in the listening mode, this object shall have a value of zero.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..255  

aspConnLastReqNum 1.3.6.1.2.1.13.12.9.1.4
The last request number on this ASP connection. If this entry is in the listening mode, this object shall have a value of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

aspConnServerEnd 1.3.6.1.2.1.13.12.9.1.5
Specifies what mode the local session end is in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sss(1), wss(2), sls(3)  

aspConnState 1.3.6.1.2.1.13.12.9.1.6
The state of this ASP connection. Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the aspConnTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant aspConnState object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open(1), closed(2), invalid(3)  

adspInPkts 1.3.6.1.2.1.13.13.1
The number of ADSP packets received by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspOutPkts 1.3.6.1.2.1.13.13.2
The number of ADSP packets sent by this entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspInOctets 1.3.6.1.2.1.13.13.3
The number of data octets contained in ADSP packets received by this entity. Note that this does not include EOM bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspOutOctets 1.3.6.1.2.1.13.13.4
The number of data octets contained in ADSP packets sent by this entity. Note that this does not include EOM bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspInDataPkts 1.3.6.1.2.1.13.13.5
The number of ADSP data packets this entity has received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspOutDataPkts 1.3.6.1.2.1.13.13.6
The number of ADSP data packets this entity has sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspTimeoutErrors 1.3.6.1.2.1.13.13.7
The number of times the ADSP on this entity detected an expired connection timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspTimeoutCloseErrors 1.3.6.1.2.1.13.13.8
The number of times the ADSP on this entity closed a connection because of too many timeouts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adspConnTable 1.3.6.1.2.1.13.13.9
A list of ADSP connections on this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdspConnEntry

adspConnEntry 1.3.6.1.2.1.13.13.9.1
A set of information describing an ADSP connection. As an example, an instance of the adspConnState object might be named adspConnState.0.80.220.7.0.80.239.142.31231
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdspConnEntry  

adspConnLocalAddress 1.3.6.1.2.1.13.13.9.1.1
The local DDP address of this ADSP connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpSocketAddress  

adspConnLocalConnID 1.3.6.1.2.1.13.13.9.1.2
The local Connection ID of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..65535  

adspConnRemoteAddress 1.3.6.1.2.1.13.13.9.1.3
The remote DDP address of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DdpSocketAddress  

adspConnRemoteConnID 1.3.6.1.2.1.13.13.9.1.4
The remote Connection ID of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

adspConnState 1.3.6.1.2.1.13.13.9.1.5
The state of this ADSP connection. The state is open if both ends are established. If only one end is established, then the state is half-open. If neither end is established, then the state is closed. If an ADSP server is listening on a socket and is not yet connected, its state is set to listening, and the adspConnRemoteAddress, adspConnRemoteSocket, adspConnRemoteConnID, and adspConnRemoteWindowSize are all set to zero. Setting this object to the value invalid(6) has the effect of invalidating the corresponding entry in the adspConnTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant adspConnState object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open(1), localHalfOpen(2), remoteHalfOpen(3), listening(4), closed(5), invalid(6)  

atportPtoPTable 1.3.6.1.2.1.13.14.1
A list of AppleTalk point-to-point connections for this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtportPtoPEntry

atportPtoPEntry 1.3.6.1.2.1.13.14.1.1
The description of one of the AppleTalk point-to-point connections on this entity. As an example, an instance of the atportPtoPRemoteAddress object might be named atportPtoPRemoteAddress.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtportPtoPEntry  

atportPtoPIndex 1.3.6.1.2.1.13.14.1.1.1
A unique value for each AppleTalk point-to-point connection. Its value is between 1 and the total number of AppleTalk point-to-point connections. The value for each connection must remain constant at least from the re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

atportPtoPProtocol 1.3.6.1.2.1.13.14.1.1.2
The protocol type used over the point-to-point connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atportPtoPRemoteName 1.3.6.1.2.1.13.14.1.1.3
A text string containing the network node name of the entity at the other end of the point-to-point link. If the name is unknown or undefined, then this string is zero length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atportPtoPRemoteAddress 1.3.6.1.2.1.13.14.1.1.4
The network address of the entity at the other end of the point-to-point link in network byte order. The format of this address can be determined by examinating the atportType corresponding to this entry. If the address is unknown or undefined, then this string is zero length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

atportPtoPPortIndex 1.3.6.1.2.1.13.14.1.1.5
The AppleTalk port associated with this point-to-point connection. The interface identified by a particular value of this index is the same interface as identified by the same value of atportIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atportPtoPStatus 1.3.6.1.2.1.13.14.1.1.6
The status of this entry in the atportPtoPTable. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the atportPtoPTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examinationr of the relevant atportPtoPStatus object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

atportPtoPProtoOids 1.3.6.1.2.1.13.14.2
OBJECT IDENTIFIER    

pToPProtoOther 1.3.6.1.2.1.13.14.2.1
OBJECT IDENTIFIER    

pToPProtoAurp 1.3.6.1.2.1.13.14.2.2
OBJECT IDENTIFIER    

pToPProtoCaymanUdp 1.3.6.1.2.1.13.14.2.3
OBJECT IDENTIFIER    

pToPProtoAtkvmsDecnetIV 1.3.6.1.2.1.13.14.2.4
OBJECT IDENTIFIER    

pToPProtoLiaisonUdp 1.3.6.1.2.1.13.14.2.5
OBJECT IDENTIFIER    

pToPProtoIpx 1.3.6.1.2.1.13.14.2.6
OBJECT IDENTIFIER    

pToPProtoShivaIp 1.3.6.1.2.1.13.14.2.7
OBJECT IDENTIFIER    

perPortTable 1.3.6.1.2.1.13.18.1
The table of per-port statistics for this entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PerPortEntry

perPortEntry 1.3.6.1.2.1.13.18.1.1
The statistics available for a particular port on this entity. As an example, an instance of the perPortAarpInProbes object might be named perPortAarpInProbes.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PerPortEntry  

perPortAarpInProbes 1.3.6.1.2.1.13.18.1.1.1
The total number of AARP Probe packets received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortAarpOutProbes 1.3.6.1.2.1.13.18.1.1.2
The total number of AARP Probe packets sent by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortAarpInReqs 1.3.6.1.2.1.13.18.1.1.3
The total number of AARP Request packets received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortAarpOutReqs 1.3.6.1.2.1.13.18.1.1.4
The total number of AARP Request packets sent by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortAarpInRsps 1.3.6.1.2.1.13.18.1.1.5
The total number of AARP Response packets received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortAarpOutRsps 1.3.6.1.2.1.13.18.1.1.6
The total number of AARP Response packets sent by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortDdpInReceives 1.3.6.1.2.1.13.18.1.1.7
The total number of input datagrams received by DDP on this port, including those received in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortDdpInLocalDatagrams 1.3.6.1.2.1.13.18.1.1.8
The total number of input DDP datagrams on this port for which this entity was their final DDP destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortDdpNoProtocolHandlers 1.3.6.1.2.1.13.18.1.1.9
The total number of DDP datagrams addressed to this entity on this port that were addressed to an upper layer protocol for which no protocol handler existed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortDdpTooShortErrors 1.3.6.1.2.1.13.18.1.1.10
The total number of input DDP datagrams on this port dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortDdpTooLongErrors 1.3.6.1.2.1.13.18.1.1.11
The total number of input DDP datagrams on this port dropped because they exceeded the maximum DDP datagram size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortDdpChecksumErrors 1.3.6.1.2.1.13.18.1.1.12
The total number of input DDP datagrams on this port for which this DDP entity was their final destination, and which were dropped because of a checksum error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortDdpForwRequests 1.3.6.1.2.1.13.18.1.1.13
The number of input datagrams on this port for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortRtmpInDataPkts 1.3.6.1.2.1.13.18.1.1.14
A count of the number of good RTMP data packets received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortRtmpOutDataPkts 1.3.6.1.2.1.13.18.1.1.15
A count of the number of RTMP packets sent by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortRtmpInRequestPkts 1.3.6.1.2.1.13.18.1.1.16
A count of the number of good RTMP Request packets received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortRtmpRouteDeletes 1.3.6.1.2.1.13.18.1.1.17
A count of the number of times RTMP deletes a route on this port because it was aged out of the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortZipInZipQueries 1.3.6.1.2.1.13.18.1.1.18
The number of ZIP Queries received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortZipInZipReplies 1.3.6.1.2.1.13.18.1.1.19
The number of ZIP Replies received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortZipInZipExtendedReplies 1.3.6.1.2.1.13.18.1.1.20
The number of ZIP Extended Replies received by this entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortZipZoneConflictErrors 1.3.6.1.2.1.13.18.1.1.21
The number of times a conflict has been detected on this port between this entity's zone information and another entity's zone information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortZipInErrors 1.3.6.1.2.1.13.18.1.1.22
The number of ZIP packets received by this entity on this port that were rejected for any error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortNbpInLookUpRequests 1.3.6.1.2.1.13.18.1.1.23
The number of NBP LookUp Requests received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortNbpInLookUpReplies 1.3.6.1.2.1.13.18.1.1.24
The number of NBP LookUp Replies received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortNbpInBroadcastRequests 1.3.6.1.2.1.13.18.1.1.25
The number of NBP Broadcast Requests received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortNbpInForwardRequests 1.3.6.1.2.1.13.18.1.1.26
The number of NBP Forward Requests received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortNbpOutLookUpReplies 1.3.6.1.2.1.13.18.1.1.27
The number of NBP LookUp Replies sent on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortNbpRegistrationFailures 1.3.6.1.2.1.13.18.1.1.28
The number of times this node experienced a failure in attempting to register an NBP entity on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortNbpInErrors 1.3.6.1.2.1.13.18.1.1.29
The number of NBP packets received by this entity on this port that were rejected for any error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortEchoRequests 1.3.6.1.2.1.13.18.1.1.30
The number of AppleTalk Echo requests received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

perPortEchoReplies 1.3.6.1.2.1.13.18.1.1.31
The count of AppleTalk Echo replies received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter