APPIAN-SYSTEM-MIB

File: APPIAN-SYSTEM-MIB.mib (67529 bytes)

Imported modules

APPIAN-SMI-MIB	APPIAN-CHASSIS-MIB	SNMPv2-SMI
SNMPv2-TC

Imported symbols

acOsap	AcNodeId	AcAdminStatus
AcOpStatus	AcNodeArchitecture	acChassisRingId
acChassisCurrentTime	MODULE-IDENTITY	OBJECT-TYPE
NOTIFICATION-TYPE	IpAddress	Gauge32
TEXTUAL-CONVENTION	DisplayString	TruthValue
DateAndTime	MacAddress

Defined Types

AcAccessRights
Community access rights: - readOnly: allows read access to all MIB tables with the exception of acCommMgrCommTable and acCommMgrSourceAddrTable. - readWrite: if there are no configured communities with security access rights, it allows read and write access to all MIB tables. However, if there is a security community configured, a community with readWrite access rights will not have read access to acCommMgrCommTable and acCommMgrSourceAddrTable, and it will not have write access to acCommMgrCommTable, acCommMgrSourceAddrTable, acTrapMgrDestAddrTable and acTrapMgrFilterTable. - security allows read-write access to all MIB tables.
TEXTUAL-CONVENTION
	INTEGER	readOnly(1), readWrite(2), security(3)

AcCommMgrCommEntry
SEQUENCE
	acCommMgrCommNodeId	AcNodeId
	acCommMgrCommId	INTEGER
	acCommMgrCommAdminStatus	AcAdminStatus
	acCommMgrCommString	DisplayString
	acCommMgrCommAccessRights	AcAccessRights

AcCommMgrSourceAddrEntry
SEQUENCE
	acCommMgrSourceAddrNodeId	AcNodeId
	acCommMgrSourceAddrCommId	INTEGER
	acCommMgrSourceAddrIpAddress	IpAddress
	acCommMgrSourceAddrIpSubnet	IpAddress
	acCommMgrSourceAddrAdminStatus	AcAdminStatus

AcStatsMgrEntry
SEQUENCE
	acStatsMgrNodeId	AcNodeId
	acStatsMgrAdminStatus	AcAdminStatus

AcEventMgrControlEntry
SEQUENCE
	acEventMgrControlNodeId	AcNodeId
	acEventMgrControlAdminStatus	AcAdminStatus
	acEventMgrControlLogMode	INTEGER
	acEventMgrControlLogMaxFileSize	INTEGER
	acEventMgrControlLogCurrentSize	INTEGER
	acEventMgrControlLogFileName	DisplayString
	acEventMgrControlLogFileWrapEnable	TruthValue
	acEventMgrControlSecurityLogMode	INTEGER
	acEventMgrControlSecurityLogMaxFileSize	INTEGER
	acEventMgrControlSecurityLogCurrentSize	INTEGER
	acEventMgrControlSecurityLogFileName	DisplayString
	acEventMgrControlSecurityLogFileWrapEnable	TruthValue
	acEventMgrControlRedirectTraceSlot1	TruthValue
	acEventMgrControlRedirectTraceSlot2	TruthValue

AcEventMgrAgentEntry
SEQUENCE
	acEventMgrAgentNodeId	AcNodeId
	acEventMgrAgentId	INTEGER
	acEventMgrAgentName	DisplayString
	acEventMgrAgentAdminStatus	AcAdminStatus
	acEventMgrAgentLogLevel	INTEGER
	acEventMgrAgentNumberEvents	INTEGER
	acEventMgrAgentLastEventCode	INTEGER
	acEventMgrAgentLastEventCount	INTEGER
	acEventMgrAgentSlot	INTEGER
	acEventMgrAgentTraceLevel	INTEGER

AcConfigMgrEntry
SEQUENCE
	acConfigMgrNodeId	AcNodeId
	acConfigMgrAdminStatus	AcAdminStatus
	acConfigMgrCurrentRevision	INTEGER
	acConfigMgrFileName	DisplayString
	acConfigMgrAutoSaveInterval	INTEGER
	acConfigMgrAutoSaveEnable	TruthValue
	acConfigMgrLastWritten	DateAndTime
	acConfigMgrSaveConfig	TruthValue
	acConfigMgrOpStatus	INTEGER

AcSntpMgrEntry
SEQUENCE
	acSntpMgrNodeId	AcNodeId
	acSntpMgrAdminStatus	AcAdminStatus
	acSntpMgrOpStatus	AcOpStatus
	acSntpMgrErrorCode	INTEGER
	acSntpMgrPeerIpAddress	IpAddress
	acSntpMgrQueryInterval	INTEGER
	acSntpMgrRetryCount	INTEGER
	acSntpMgrMaxVariance	INTEGER
	acSntpMgrVariance	INTEGER
	acSntpMgrVarianceDetectEnable	TruthValue
	acSntpMgrTimeZone	INTEGER
	acSntpMgrDayLightSaving	TruthValue

AcAuthMgrEntry
SEQUENCE
	acAuthMgrNodeId	AcNodeId
	acAuthMgrUserId	INTEGER
	acAuthMgrUserName	DisplayString
	acAuthMgrAccessMode	INTEGER
	acAuthMgrLogonTime	DateAndTime
	acAuthMgrFailures	INTEGER
	acAuthMgrLockOut	TruthValue
	acAuthMgrDeleteEntry	TruthValue

AcTrapMgrDestAddrEntry
SEQUENCE
	acTrapMgrDestAddrNodeId	AcNodeId
	acTrapMgrDestAddrCommId	INTEGER
	acTrapMgrDestAddrIpAddress	IpAddress
	acTrapMgrDestAddrAdminStatus	AcAdminStatus

AcTrapMgrFilterEntry
SEQUENCE
	acTrapMgrFilterNodeId	AcNodeId
	acTrapMgrFilterCommId	INTEGER
	acTrapMgrFilterId	INTEGER
	acTrapMgrFilterAdminStatus	AcAdminStatus
	acTrapMgrFilterTrapOid	OBJECT IDENTIFIER

AcTrapMgrResendEntry
SEQUENCE
	acTrapMgrResendNodeId	AcNodeId
	acTrapMgrResendAdminStatus	AcAdminStatus
	acTrapMgrResendFromSeqId	INTEGER
	acTrapMgrResendToSeqId	INTEGER

AcFileXferMgrEntry
SEQUENCE
	acFileXferMgrNodeId	AcNodeId
	acFileXferMgrRowId	INTEGER
	acFileXferMgrAdminStatus	AcAdminStatus
	acFileXferMgrOperation	INTEGER
	acFileXferMgrFiletype	INTEGER
	acFileXferMgrFilesubtype	INTEGER
	acFileXferMgrFtpServerIpAddress	IpAddress
	acFileXferMgrUsername	DisplayString
	acFileXferMgrPassword	DisplayString
	acFileXferMgrSourceDirectory	DisplayString
	acFileXferMgrSourceFilename	DisplayString
	acFileXferMgrDestDirectory	DisplayString
	acFileXferMgrDestFilename	DisplayString
	acFileXferMgrXferMode	INTEGER
	acFileXferMgrOpStatus	INTEGER

AcRdpMgrEntry
SEQUENCE
	acRdpMgrNodeId	AcNodeId
	acRdpMgrFsmState	INTEGER
	acRdpMgrRingMasterNodeMac	MacAddress
	acRdpMgrRingTopology	INTEGER
	acRdpMgrRingState	INTEGER
	acRdpMgrRingSize	INTEGER
	acRdpMgrRdpVersion	INTEGER

AcRdpMgrNodeEntry
SEQUENCE
	acRdpMgrNodeThisNodeId	AcNodeId
	acRdpMgrNodeRowId	INTEGER
	acRdpMgrNodeNodeId	AcNodeId
	acRdpMgrNodeADccIpAddress	IpAddress
	acRdpMgrNodeADccMacAddress	MacAddress
	acRdpMgrNodeADccConfig	INTEGER
	acRdpMgrNodeADccEastOk	TruthValue
	acRdpMgrNodeADccWestOk	TruthValue
	acRdpMgrNodeNodeArch	AcNodeArchitecture

Defined Values

acSystem		1.3.6.1.4.1.2785.2.7
Appian Communications Services MIB definitions file containing configuration and statistics control for system related services. These services include Configuration Management, Event Logging, Statistics Collection, Alarms and Thresholds configuration, OSAP discovery and topology protocol.
MODULE-IDENTITY

acCommMgr		1.3.6.1.4.1.2785.2.7.1
OBJECT IDENTIFIER

acStatsMgr		1.3.6.1.4.1.2785.2.7.2
OBJECT IDENTIFIER

acEventMgr		1.3.6.1.4.1.2785.2.7.3
OBJECT IDENTIFIER

acConfigMgr		1.3.6.1.4.1.2785.2.7.4
OBJECT IDENTIFIER

acSntpMgr		1.3.6.1.4.1.2785.2.7.7
OBJECT IDENTIFIER

acAuthMgr		1.3.6.1.4.1.2785.2.7.8
OBJECT IDENTIFIER

acTrapMgr		1.3.6.1.4.1.2785.2.7.9
OBJECT IDENTIFIER

acFileXferMgr		1.3.6.1.4.1.2785.2.7.10
OBJECT IDENTIFIER

acRdpMgr		1.3.6.1.4.1.2785.2.7.11
OBJECT IDENTIFIER

acCommMgrCommTable		1.3.6.1.4.1.2785.2.7.1.1
Table for configuring community strings and community access rights.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcCommMgrCommEntry

acCommMgrCommEntry		1.3.6.1.4.1.2785.2.7.1.1.1
Entry of community table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcCommMgrCommEntry

acCommMgrCommNodeId		1.3.6.1.4.1.2785.2.7.1.1.1.1
Unique identification number of this node within an Appian ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acCommMgrCommId		1.3.6.1.4.1.2785.2.7.1.1.1.2
Number that uniquely identifies a community.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acCommMgrCommAdminStatus		1.3.6.1.4.1.2785.2.7.1.1.1.3
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-create
OBJECT-TYPE
	AcAdminStatus

acCommMgrCommString		1.3.6.1.4.1.2785.2.7.1.1.1.4
String that uniquely identifies a community.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

acCommMgrCommAccessRights		1.3.6.1.4.1.2785.2.7.1.1.1.5
Community access rights. See AcAccessRights for the semantics.
Status: current	Access: read-create
OBJECT-TYPE
	AcAccessRights

acCommMgrSourceAddrTable		1.3.6.1.4.1.2785.2.7.1.2
Table that specifies valid SNMP request source IP addresses and/or subnets for the different communities.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcCommMgrSourceAddrEntry

acCommMgrSourceAddrEntry		1.3.6.1.4.1.2785.2.7.1.2.1
Entry that specifies a valid SNMP request source IP address or subnet for a given community.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcCommMgrSourceAddrEntry

acCommMgrSourceAddrNodeId		1.3.6.1.4.1.2785.2.7.1.2.1.1
Unique identification number of this node within an Appian ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acCommMgrSourceAddrCommId		1.3.6.1.4.1.2785.2.7.1.2.1.2
Number that uniquely identifies a community.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acCommMgrSourceAddrIpAddress		1.3.6.1.4.1.2785.2.7.1.2.1.3
Valid source IP address for SNMP requests of this community. All source IP addresses are valid for a given community if there are no entries in acCommMgrSourceAddrTable for this community with acCommMgrSourceAddrAdminStatus equal to activate
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

acCommMgrSourceAddrIpSubnet		1.3.6.1.4.1.2785.2.7.1.2.1.4
Subnet mask for valid source IP subnet for SNMP requests of this community.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

acCommMgrSourceAddrAdminStatus		1.3.6.1.4.1.2785.2.7.1.2.1.5
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-create
OBJECT-TYPE
	AcAdminStatus

acStatsMgrTable		1.3.6.1.4.1.2785.2.7.2.1
A table of statistics manager configuration parameters which is indexed by AcNodeId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcStatsMgrEntry

acStatsMgrEntry		1.3.6.1.4.1.2785.2.7.2.1.1
The configuration and status parameters controlling the Statistics Manager service on this specific node.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcStatsMgrEntry

acStatsMgrNodeId		1.3.6.1.4.1.2785.2.7.2.1.1.1
The unique node identification number assigned by the EMS system to uniquely identify this node within an Appian ring of OSAP's.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acStatsMgrAdminStatus		1.3.6.1.4.1.2785.2.7.2.1.1.2
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-write
OBJECT-TYPE
	AcAdminStatus

acEventMgrControlTable		1.3.6.1.4.1.2785.2.7.3.1
A table of configuration parameters controlling the event manager. The event manager is responsible for logging security and application state changes generated on a node. These events are stored in non-volitile memory and may be sent as traps to the EMS system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcEventMgrControlEntry

acEventMgrControlEntry		1.3.6.1.4.1.2785.2.7.3.1.1
The configuration and status parameters controlling the Event Logging Manager service on this specific node.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcEventMgrControlEntry

acEventMgrControlNodeId		1.3.6.1.4.1.2785.2.7.3.1.1.1
The unique node identification number assigned by the EMS system to uniquely identify this node within an Appian ring of OSAP's.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acEventMgrControlAdminStatus		1.3.6.1.4.1.2785.2.7.3.1.1.2
The administrative status. See AcAdminStatus for the semantics.
Status: deprecated	Access: read-write
OBJECT-TYPE
	AcAdminStatus

acEventMgrControlLogMode		1.3.6.1.4.1.2785.2.7.3.1.1.3
There are two kinds of logs in OSAP: regular log, and security log. This is the attribute to control the mode of operation of the regular event log. The regular event log can be configured to write to flash, or it can be disabled. When disabled, the event manager will keep a record of events in memory, which are available to the local CLI/TL1 but are not persistant.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), flash-only(2)

acEventMgrControlLogMaxFileSize		1.3.6.1.4.1.2785.2.7.3.1.1.4
The size of the regular event log on the file system measured in k-bytes.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10..1024

acEventMgrControlLogCurrentSize		1.3.6.1.4.1.2785.2.7.3.1.1.5
The current size of the regular event log measured in k-bytes.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acEventMgrControlLogFileName		1.3.6.1.4.1.2785.2.7.3.1.1.6
The name of the binary regular log file.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

acEventMgrControlLogFileWrapEnable		1.3.6.1.4.1.2785.2.7.3.1.1.7
When set to true, tells the event log manager to wrap the regular event log file when it has reached the maximum size. Oldest log entries are overwritten first when a wrap condition is reached.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

acEventMgrControlSecurityLogMode		1.3.6.1.4.1.2785.2.7.3.1.1.8
There are two kinds of logs in OSAP: regular log, and security log. This is the attribute to control the mode of operation of the security event log. The security event log can be configured to write to flash, or it can be disabled. When disabled, the event manager will keep a record of events in memory, which are available to the local CLI/TL1 but are not persistant.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), flash-only(2)

acEventMgrControlSecurityLogMaxFileSize		1.3.6.1.4.1.2785.2.7.3.1.1.9
The size of the regular security log on the file system measured in k-bytes.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10..1024

acEventMgrControlSecurityLogCurrentSize		1.3.6.1.4.1.2785.2.7.3.1.1.10
The current size of the security event log measured in k-bytes.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acEventMgrControlSecurityLogFileName		1.3.6.1.4.1.2785.2.7.3.1.1.11
The name of the binary security log file.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

acEventMgrControlSecurityLogFileWrapEnable		1.3.6.1.4.1.2785.2.7.3.1.1.12
When set to true, tells the event log manager to wrap the security event log file when it has reached the maximum size. Oldest log entries are overwritten first when a wrap condition is reached.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

acEventMgrControlRedirectTraceSlot1		1.3.6.1.4.1.2785.2.7.3.1.1.13
When set to true, events that originate in slot 1 and would otherwise be displayed on the global standard output (console or telnet session) of slot 1, will instead be displayed on the global standard output of the master switch.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acEventMgrControlRedirectTraceSlot2		1.3.6.1.4.1.2785.2.7.3.1.1.14
When set to true, events that originate in slot 2 and would otherwise be displayed on the global standard output (console or telnet session) of slot 2, will instead be displayed on the global standard output of the master switch.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acEventMgrAgentTable		1.3.6.1.4.1.2785.2.7.3.2
This table provides configuration on a per agent basis for the handling of event messages from each agent. This table is automatically created by the system and does not need to be generated by the EMS.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcEventMgrAgentEntry

acEventMgrAgentEntry		1.3.6.1.4.1.2785.2.7.3.2.1
A row per entity which allows for configuration settings on how eventlog messages generated by this entity are stored and reported for the EMS.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcEventMgrAgentEntry

acEventMgrAgentNodeId		1.3.6.1.4.1.2785.2.7.3.2.1.1
A unique node identification number which uniquely identifies a node within an Appian ring of OSAPs.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acEventMgrAgentId		1.3.6.1.4.1.2785.2.7.3.2.1.2
The acEventMgrAgentId identifies the agent which will be logging events within the event manager subsystem. The enumeration list of these well known ID's are published and used by the EMS in decoding the event log information for which agent has recorded an event.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	kernel(1), common(2), msgsvc(3), fwdmgr(4), iasmgr(5), tlsmgr(6), cfgmgr(7), almmgr(8), clisvc(9), tl1svc(10), enetaccess(11), system(12), enetIME(13), ds1Tdm(14), ds3Tdm(15), ds3Net(16), oc3Net(17), ppp(18), tta(19), asrt(20), fr(21), sntp(22), bpm(23), snmp(24), telnet(25), serial(26), statsmgr(27), appiandcc(28), excep(29), mgmtapi(30), lpta(31), scmctrl(32), sonet(33), temux(34), qos(35), service(36), mlc(37), hdlc(38), modmgr(39), scpplt(40), clkdrv(41), plc(42), mach(43), enetagg(44), eventmgr(45), mgmtrem(46), rdp(47), loader(48)

acEventMgrAgentName		1.3.6.1.4.1.2785.2.7.3.2.1.3
An ASCII name of the well known agent, sutible for display.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..16)

acEventMgrAgentAdminStatus		1.3.6.1.4.1.2785.2.7.3.2.1.4
The administrative status. See AcAdminStatus for the semantics.
Status: deprecated	Access: read-write
OBJECT-TYPE
	AcAdminStatus

acEventMgrAgentLogLevel		1.3.6.1.4.1.2785.2.7.3.2.1.5
The logging level at which this entity will generate events destined for the event log manager. Currently this value is a bit mask allowing the user to select which types of events to store in the log. The bit mask values are selected as follows based on the position of the bit: critical(1), -- Critical means needs immediate attn. major(2), -- The resources may be exhausted soon. minor(4), -- Early indication of resource exhaustion. warning(8), -- Warnings, non-fatal. info(16), -- Informational event. debug(32), -- Used for debugging only. cleared(64), -- An alarm is being cleared. security-critical(128), -- Security log - Critical means needs immediate attn. security-major(256), -- Security log - The resources may be exhausted soon. security-minor(512), -- Security log - Early indication of resource exhaustion. security-warning(1024), -- Security log - Warnings, non-fatal. security-info(2048), -- Security log - Informational event. security-debug(4096), -- Security log - Used for debugging only. security-cleared(8192) -- Security log - An alarm is being cleared. The mask is generated as a logical OR of the values defined above.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..16383

acEventMgrAgentNumberEvents		1.3.6.1.4.1.2785.2.7.3.2.1.6
The total number of events this entity has generated on this slot.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

acEventMgrAgentLastEventCode		1.3.6.1.4.1.2785.2.7.3.2.1.7
The last event ID which was generated by this entity on this slot.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

acEventMgrAgentLastEventCount		1.3.6.1.4.1.2785.2.7.3.2.1.8
The number of times the last event ID has been generated on this slot. Helpful in keeping a running count of the last event in the case of repeating errors.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

acEventMgrAgentSlot		1.3.6.1.4.1.2785.2.7.3.2.1.9
The slot number where the configuration of this row will be applied.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..4

acEventMgrAgentTraceLevel		1.3.6.1.4.1.2785.2.7.3.2.1.10
Specifies what types of events originated by this entity will be displayed on the standard global output as traces. Currently this value is a bit mask allowing the user to select which types of events to display. The bit mask values are selected as follows based on the position of the bit: critical(1), -- Critical means needs immediate attn. major(2), -- The resources may be exhausted soon. minor(4), -- Early indication of resource exhaustion. warning(8), -- Warnings, non-fatal. info(16), -- Informational event. debug(32), -- Used for debugging only. cleared(64), -- An alarm is being cleared. security-critical(128), -- Security log - Critical means needs immediate attn. security-major(256), -- Security log - The resources may be exhausted soon. security-minor(512), -- Security log - Early indication of resource exhaustion. security-warning(1024), -- Security log - Warnings, non-fatal. security-info(2048), -- Security log - Informational event. security-debug(4096), -- Security log - Used for debugging only. security-cleared(8192) -- Security log - An alarm is being cleared. The mask is generated as a logical OR of the values defined above.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..16383

acEventMgrTraps		1.3.6.1.4.1.2785.2.7.3.0
OBJECT IDENTIFIER

acEventMgrLogFullTrap		1.3.6.1.4.1.2785.2.7.3.0.1
The event log is over 90% full and wrapping is not enabled.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

acEventMgrSecurityLogFullTrap		1.3.6.1.4.1.2785.2.7.3.0.2
The security log is over 90% full and wrapping is not enabled.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

acEventMgrLogFileCloseFailedTrap		1.3.6.1.4.1.2785.2.7.3.0.3
The regular log file couldn't be closed.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

acEventMgrSecurityLogFileCloseFailedTrap		1.3.6.1.4.1.2785.2.7.3.0.4
The security log file couldn't be closed.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

acConfigMgrTable		1.3.6.1.4.1.2785.2.7.4.1
The configuration manager configuration parameters in a table which is indexed by a unique AcNodeId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcConfigMgrEntry

acConfigMgrEntry		1.3.6.1.4.1.2785.2.7.4.1.1
Single record per node which contains the configuration parameters for the configuration manager agent. This row is automatically created by the agent upon system initialization.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcConfigMgrEntry

acConfigMgrNodeId		1.3.6.1.4.1.2785.2.7.4.1.1.1
A unique number assigned by the EMS which uniquely identifies a node within an Appian ring of OSAP's.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acConfigMgrAdminStatus		1.3.6.1.4.1.2785.2.7.4.1.1.2
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-write
OBJECT-TYPE
	AcAdminStatus

acConfigMgrCurrentRevision		1.3.6.1.4.1.2785.2.7.4.1.1.3
The numeric revision number for the configuration file. This number is Appian specific and not an RCS type revision for the file, but instead an internal software revision of the file format.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acConfigMgrFileName		1.3.6.1.4.1.2785.2.7.4.1.1.4
The name of the configuration file. When the system boots, this config file is expected to be on the file system and will be the file that the system uses for normal operation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

acConfigMgrAutoSaveInterval		1.3.6.1.4.1.2785.2.7.4.1.1.5
The number of seconds after a provisioning change when the config file is updated with the current state of configuration for this node. The acConfigMgrAutoSaveEnable flag must be set to true(1) for auto-save to take place.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..60

acConfigMgrAutoSaveEnable		1.3.6.1.4.1.2785.2.7.4.1.1.6
When set to true(1), the configuration manager will perform an update operation on the configuration file after 'n' seconds from the last provisioning change, specified by acConfigMgrAutoSaveInterval. Enabling this feature allows the EMS to assume the platform is in sync with a recent dynamic provisioning change, vs. sending down a new configuration file.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acConfigMgrLastWritten		1.3.6.1.4.1.2785.2.7.4.1.1.7
The last time the configuration file was updated automatically.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

acConfigMgrSaveConfig		1.3.6.1.4.1.2785.2.7.4.1.1.8
When set to true(1), the configuration manager will perform an update operation on the configuration file immediately.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acConfigMgrOpStatus		1.3.6.1.4.1.2785.2.7.4.1.1.9
This attribute indicates the configuration file save status when acConfigMgrSaveConfig is set.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	succeeded(1), failed(2), writing(3)

acConfigMgrTraps		1.3.6.1.4.1.2785.2.7.4.0
OBJECT IDENTIFIER

acConfigMgrConfigFileCloseFailedTrap		1.3.6.1.4.1.2785.2.7.4.0.1
The configuration file couldn't be closed.
Status: current	Access: read-only
NOTIFICATION-TYPE

acSntpMgrTable		1.3.6.1.4.1.2785.2.7.7.1
The SNTP Manager is responsible for controlling the SNTP client agent on the SCP. The SNTP client will peer with a time server which itself may peer with a higher stratum clock or a radio receiver.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcSntpMgrEntry

acSntpMgrEntry		1.3.6.1.4.1.2785.2.7.7.1.1
A configuration record for the SNTP client agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcSntpMgrEntry

acSntpMgrNodeId		1.3.6.1.4.1.2785.2.7.7.1.1.1
A unique identifier assigned by the EMS which uniquely identifies a node within an Appian ring of OSAP's.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acSntpMgrAdminStatus		1.3.6.1.4.1.2785.2.7.7.1.1.2
Attribute allowing enable/disabling control of the SNTP agent for provisioning changes. Refer to AcAdminStatus definition in appian-smi.mib.
Status: current	Access: read-write
OBJECT-TYPE
	AcAdminStatus

acSntpMgrOpStatus		1.3.6.1.4.1.2785.2.7.7.1.1.3
Attribute which describes the current operational status of the SNTP client agent. Refer to AcOpStatus definition in appian-smi.mib.
Status: current	Access: read-only
OBJECT-TYPE
	AcOpStatus

acSntpMgrErrorCode		1.3.6.1.4.1.2785.2.7.7.1.1.4
If an error is reported in acSntpMgrOpStatus, this attribute will contain a detailed error code which can be referenced to determine the cause of a problem. The eventlog will also contain the failure reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acSntpMgrPeerIpAddress		1.3.6.1.4.1.2785.2.7.7.1.1.5
The configured IP Address in dotted notation which SNTP uses to perform NTP queries against. The peer should be a Stratum-2 or greater clock.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

acSntpMgrQueryInterval		1.3.6.1.4.1.2785.2.7.7.1.1.6
The interval expressed in the number of seconds between NTP Query requests.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..3600

acSntpMgrRetryCount		1.3.6.1.4.1.2785.2.7.7.1.1.7
The number of query attempts the SNTP client should perform before reporting that the SNTP client cannot communicate with the peer.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acSntpMgrMaxVariance		1.3.6.1.4.1.2785.2.7.7.1.1.8
The variance expressed as the number of milliseconds between client and peer which will trigger an alarm. This is useful in determining if the historical data recorded in NOVRAM for statistics trending or timestamps used for traps is outside the configured variance parameter.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..7200000

acSntpMgrVariance		1.3.6.1.4.1.2785.2.7.7.1.1.9
The amount of time expressed as the number of milliseconds delta between client and peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acSntpMgrVarianceDetectEnable		1.3.6.1.4.1.2785.2.7.7.1.1.10
Used to enable or disable variance threshold alarms.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acSntpMgrTimeZone		1.3.6.1.4.1.2785.2.7.7.1.1.11
The time zone this node is currently located in, expressed as an integer ranging from 0 to 23, representing the 24 hr time- zones starting at UTC which is equal to 0 and proceeding in the positive westerly direction. ie: Boston = 5, California=8. Note: Daylight savings time is not automatically calculated.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

acSntpMgrDayLightSaving		1.3.6.1.4.1.2785.2.7.7.1.1.12
It specifies if daylight saving time is applicable.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acSntpMgrTraps		1.3.6.1.4.1.2785.2.7.7.0
OBJECT IDENTIFIER

acSntpMgrPeerFailureTrap		1.3.6.1.4.1.2785.2.7.7.0.1
The SNTP Client is unable to communicate with the NTP Server which has been configured.
Status: current	Access: read-write
NOTIFICATION-TYPE

acSntpMgrVarianceTrap		1.3.6.1.4.1.2785.2.7.7.0.2
The difference in time between client and peer exceeds the configured variance.
Status: current	Access: read-write
NOTIFICATION-TYPE

acSntpMgrHardwareTrap		1.3.6.1.4.1.2785.2.7.7.0.3
The SNTP Client was unable to read or write the hardware clock.
Status: current	Access: read-write
NOTIFICATION-TYPE

acAuthMgrTable		1.3.6.1.4.1.2785.2.7.8.1
The Authentication Manager is responsible for tracking who is logged into the system and how many success or failure events have occured for a unique user. As users log off the system they will be removed from the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcAuthMgrEntry

acAuthMgrEntry		1.3.6.1.4.1.2785.2.7.8.1.1
A single row within the authentication table tracking a single user session which can be via telnet, serial, rlogin or ftp.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcAuthMgrEntry

acAuthMgrNodeId		1.3.6.1.4.1.2785.2.7.8.1.1.1
A unique number within an Appian Ring identifying the node for which the user is logged into.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acAuthMgrUserId		1.3.6.1.4.1.2785.2.7.8.1.1.2
A unique identifier within an Appian node which is used to identify the user currently attempting to gain access to the system.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acAuthMgrUserName		1.3.6.1.4.1.2785.2.7.8.1.1.3
A unique identifier within an Appian node which is used to identify the user currently attempting to gain access to the system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(4..16)

acAuthMgrAccessMode		1.3.6.1.4.1.2785.2.7.8.1.1.4
The current access method for this user.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), serial(1), telnet(2), rlogin(3), ftp(4)

acAuthMgrLogonTime		1.3.6.1.4.1.2785.2.7.8.1.1.5
The logon time this user was given access.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

acAuthMgrFailures		1.3.6.1.4.1.2785.2.7.8.1.1.6
The total number of logon attempts for a user who was given access to the system and who is currently still logged in, or the failure attempts for a user who attempted to gain access but did not.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acAuthMgrLockOut		1.3.6.1.4.1.2785.2.7.8.1.1.7
This field will read true(1) when the max number of failures has been reached for an attempted logon using the user name listed in this row.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acAuthMgrDeleteEntry		1.3.6.1.4.1.2785.2.7.8.1.1.8
Used to delete rows in this table.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acTrapMgrDestAddrTable		1.3.6.1.4.1.2785.2.7.9.1
Table that specifies trap destination IP addresses for the different communities.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcTrapMgrDestAddrEntry

acTrapMgrDestAddrEntry		1.3.6.1.4.1.2785.2.7.9.1.1
Entry that specifies, for a given community, an IP address to send traps to.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcTrapMgrDestAddrEntry

acTrapMgrDestAddrNodeId		1.3.6.1.4.1.2785.2.7.9.1.1.1
Unique identification number of this node within an Appian ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acTrapMgrDestAddrCommId		1.3.6.1.4.1.2785.2.7.9.1.1.2
Number that uniquely identifies a community.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acTrapMgrDestAddrIpAddress		1.3.6.1.4.1.2785.2.7.9.1.1.3
IP address to send traps to.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

acTrapMgrDestAddrAdminStatus		1.3.6.1.4.1.2785.2.7.9.1.1.4
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-create
OBJECT-TYPE
	AcAdminStatus

acTrapMgrFilterTable		1.3.6.1.4.1.2785.2.7.9.2
Table that lists, for the different communities, the traps that these communities don't want to receive.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcTrapMgrFilterEntry

acTrapMgrFilterEntry		1.3.6.1.4.1.2785.2.7.9.2.1
This entry specifies a trap type (by OID) that the specified community is not interested in receiving.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcTrapMgrFilterEntry

acTrapMgrFilterNodeId		1.3.6.1.4.1.2785.2.7.9.2.1.1
Unique identification number of this node within an Appian ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acTrapMgrFilterCommId		1.3.6.1.4.1.2785.2.7.9.2.1.2
Number that uniquely identifies a community.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acTrapMgrFilterId		1.3.6.1.4.1.2785.2.7.9.2.1.3
Number that, for the given node and community, uniquely identifies this filter.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acTrapMgrFilterAdminStatus		1.3.6.1.4.1.2785.2.7.9.2.1.4
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-create
OBJECT-TYPE
	AcAdminStatus

acTrapMgrFilterTrapOid		1.3.6.1.4.1.2785.2.7.9.2.1.5
Object identifier that identifies the trap type that will not be sent to the given community.
Status: current	Access: read-create
OBJECT-TYPE
	OBJECT IDENTIFIER

acTrapMgrResendTable		1.3.6.1.4.1.2785.2.7.9.3
Table that allows a management system to request traps to be resent. Only the last 100 traps generated by the OSAP will be stored.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcTrapMgrResendEntry

acTrapMgrResendEntry		1.3.6.1.4.1.2785.2.7.9.3.1
Setting this entry triggers the specified traps to be resent to the destination IP address specified.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcTrapMgrResendEntry

acTrapMgrResendNodeId		1.3.6.1.4.1.2785.2.7.9.3.1.1
Unique identification number of this node within an Appian ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acTrapMgrResendAdminStatus		1.3.6.1.4.1.2785.2.7.9.3.1.2
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-write
OBJECT-TYPE
	AcAdminStatus

acTrapMgrResendFromSeqId		1.3.6.1.4.1.2785.2.7.9.3.1.3
Beginning of trap sequence number interval of traps to resend.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acTrapMgrResendToSeqId		1.3.6.1.4.1.2785.2.7.9.3.1.4
End of trap sequence number interval of traps to resend. If acTrapMgrResendToSeqId is the same as acTrapMgrResendFromSeqId, then only 1 trap is sent.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acAuthMgrTraps		1.3.6.1.4.1.2785.2.7.8.0
OBJECT IDENTIFIER

acAuthenticationFailureTrap		1.3.6.1.4.1.2785.2.7.8.0.1
Access denied due to a Logon Authentication failure.
Status: current	Access: read-write
NOTIFICATION-TYPE

acAuthenticationExceededTrap		1.3.6.1.4.1.2785.2.7.8.0.2
The maximum number of authentication failure attempts has been exceeded. Access has been denied.
Status: current	Access: read-write
NOTIFICATION-TYPE

acAuthenticationSuccessTrap		1.3.6.1.4.1.2785.2.7.8.0.3
Successful logon by user.
Status: current	Access: read-write
NOTIFICATION-TYPE

acFileXferMgrTable		1.3.6.1.4.1.2785.2.7.10.1
This table contains file transfer operation information. This table is created during the initialization of the system. The EMS does not create new rows in it.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcFileXferMgrEntry

acFileXferMgrEntry		1.3.6.1.4.1.2785.2.7.10.1.1
Each row in this table indicates a file transfer operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcFileXferMgrEntry

acFileXferMgrNodeId		1.3.6.1.4.1.2785.2.7.10.1.1.1
A unique node identification number which uniquely identifies a node within an Appian ring of OSAPs.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acFileXferMgrRowId		1.3.6.1.4.1.2785.2.7.10.1.1.2
The acFileXferMgrRowId identifies the row index of the table.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..5

acFileXferMgrAdminStatus		1.3.6.1.4.1.2785.2.7.10.1.1.3
The administrative status. See AcAdminStatus for the semantics.
Status: current	Access: read-write
OBJECT-TYPE
	AcAdminStatus

acFileXferMgrOperation		1.3.6.1.4.1.2785.2.7.10.1.1.4
The operation type. The upload and download indicate the direction of the file transfer from the perspective of the OSAP. A download is an ftp get from the ftp server, and an upload is an ftp put to the ftp server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	upload(1), download(2)

acFileXferMgrFiletype		1.3.6.1.4.1.2785.2.7.10.1.1.5
This attribute indicates whether a binary image, or a binary event log, a textual configuration file or any other file is being transferred.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	image(1), eventlog(2), config(3), generic(4)

acFileXferMgrFilesubtype		1.3.6.1.4.1.2785.2.7.10.1.1.6
This attribute indicates what type of file it is.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	primaryimage(1), namedbootimage(2), regularlog(3), securitylog(4), none(5)

acFileXferMgrFtpServerIpAddress		1.3.6.1.4.1.2785.2.7.10.1.1.7
The IP Address of the ftp server from where the file is being transferred.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

acFileXferMgrUsername		1.3.6.1.4.1.2785.2.7.10.1.1.8
The user name to be used for the ftp login authentication. This is optional. If not supplied, the default value is used.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

acFileXferMgrPassword		1.3.6.1.4.1.2785.2.7.10.1.1.9
The password to be used for the ftp login authentication. This is optional. If not supplied, the default value is used, which is the chassis name of the OSAP. When supplied, the password is in the clear-text form.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

acFileXferMgrSourceDirectory		1.3.6.1.4.1.2785.2.7.10.1.1.10
The name of the source directory for the file transfer operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..100)

acFileXferMgrSourceFilename		1.3.6.1.4.1.2785.2.7.10.1.1.11
The name of the source file for the file transfer operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

acFileXferMgrDestDirectory		1.3.6.1.4.1.2785.2.7.10.1.1.12
The name of the destination directory for the file transfer operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..100)

acFileXferMgrDestFilename		1.3.6.1.4.1.2785.2.7.10.1.1.13
The name of the destination file for the file transfer operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

acFileXferMgrXferMode		1.3.6.1.4.1.2785.2.7.10.1.1.14
This attribute indicates the mode of the transfer: ascii or binary.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ascii(1), binary(2)

acFileXferMgrOpStatus		1.3.6.1.4.1.2785.2.7.10.1.1.15
This attribute indicates whether the file transfer operation has been successful, or failed, or in progress.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	succeeded(1), failed(2), inprogress(3)

acFileXferMgrTraps		1.3.6.1.4.1.2785.2.7.10.0
OBJECT IDENTIFIER

acFileXferMgrXferFailedTrap		1.3.6.1.4.1.2785.2.7.10.0.1
The file transfer operation failed.
Status: current	Access: read-only
NOTIFICATION-TYPE

acFileXferMgrXferCompletedTrap		1.3.6.1.4.1.2785.2.7.10.0.2
The file transfer operation completed.
Status: current	Access: read-only
NOTIFICATION-TYPE

acRdpMgrTable		1.3.6.1.4.1.2785.2.7.11.1
This table contains general Appian ring information discovered through the Ring Discovery Protocol (RDP).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcRdpMgrEntry

acRdpMgrEntry		1.3.6.1.4.1.2785.2.7.11.1.1
General Appian ring information discovered through RDP by the node specified by the index acRdpMgrNodeId.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcRdpMgrEntry

acRdpMgrNodeId		1.3.6.1.4.1.2785.2.7.11.1.1.1
Identifies the node where the Appian ring information was gathered.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acRdpMgrFsmState		1.3.6.1.4.1.2785.2.7.11.1.1.2
State of the RDP Finite State Machine. Possible values: - isolated: the node is isolated. - discovery: the node is not isolated and is in the process of gathering Appian ring information. - master: the Appian ring information has been gathered and this node plays the role of master in the Ring Discovery Protocol (node with lowest Appian DCC MAC in the ring). - pleb: the Appian ring information has been gathered and this node does not play the role of master in the Ring Discovery Protocol (there is a node with a lower Appian DCC MAC in the ring).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	isolated(0), discovery(1), master(2), pleb(3)

acRdpMgrRingMasterNodeMac		1.3.6.1.4.1.2785.2.7.11.1.1.3
MAC address of RDP master node in the Appian ring.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

acRdpMgrRingTopology		1.3.6.1.4.1.2785.2.7.11.1.1.4
Appian ring topology. Possible values: - unknown: there is not enough information available to determine whether this node is part of an open or closed ring. - open: two of the nodes in the ring are configured as End Systems. - closed: all nodes in the ring are configured as Intermediate Systems.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), open(1), closed(2)

acRdpMgrRingState		1.3.6.1.4.1.2785.2.7.11.1.1.5
Appian ring state: - unknown: there is not enough information available to determine whether the Appian ring is complete or incomplete. - complete: the ring map obtained contains all nodes in the ring. - incomplete: the ring map obtained does not contain all nodes in the ring. This may be due to a broken optical link or to misconfiguration of any of the nodes in the ring (wrong acChassisNodeArchitecture).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), complete(1), incomplete(2)

acRdpMgrRingSize		1.3.6.1.4.1.2785.2.7.11.1.1.6
Number of nodes in the Appian ring. The special value -1 means the ring size is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acRdpMgrRdpVersion		1.3.6.1.4.1.2785.2.7.11.1.1.7
Current version of the Ring Discovery Protocol (RDP)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

acRdpMgrNodeTable		1.3.6.1.4.1.2785.2.7.11.2
This table contains information about the different nodes in the Appian DCC ring that this node is part of. The first entry in this table corresponds to this node. Each entry in the table corresponds to the East neighbor of the node referred to by the previous entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcRdpMgrNodeEntry

acRdpMgrNodeEntry		1.3.6.1.4.1.2785.2.7.11.2.1
Each row in this table contains information about a node in the Appian DCC ring.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcRdpMgrNodeEntry

acRdpMgrNodeThisNodeId		1.3.6.1.4.1.2785.2.7.11.2.1.1
A unique node identification number which uniquely identifies this node within an Appian ring of OSAPs.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acRdpMgrNodeRowId		1.3.6.1.4.1.2785.2.7.11.2.1.2
Index that identifies this row in the table.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acRdpMgrNodeNodeId		1.3.6.1.4.1.2785.2.7.11.2.1.3
Node Id of node represented by this entry in the table.
Status: current	Access: read-only
OBJECT-TYPE
	AcNodeId

acRdpMgrNodeADccIpAddress		1.3.6.1.4.1.2785.2.7.11.2.1.4
IP address assigned to the Appian DCC management access interface of the node represented by this entry in the table.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

acRdpMgrNodeADccMacAddress		1.3.6.1.4.1.2785.2.7.11.2.1.5
Appian DCC MAC address of the node represented by this entry in the table.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

acRdpMgrNodeADccConfig		1.3.6.1.4.1.2785.2.7.11.2.1.6
RDP node configuration. Possible values: - unknown: the node configuration is unknown. - is: Intermediate System. The node is expected to have both an East and a West neighbor node in the Appian DCC ring. - ese: End System East. The node is expected to only have a West neighbor node in the Appian DCC ring. - esw: End System West. The node is expected to only have an East neighbor node in the Appian DCC ring.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), is(1), ese(2), esw(3)

acRdpMgrNodeADccEastOk		1.3.6.1.4.1.2785.2.7.11.2.1.7
Specifies whether RDP is active (there is light and we are receiving RDP packets) on the East interface.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acRdpMgrNodeADccWestOk		1.3.6.1.4.1.2785.2.7.11.2.1.8
Specifies whether RDP is active (there is light and we are receiving RDP packets) on the West interface.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acRdpMgrNodeNodeArch		1.3.6.1.4.1.2785.2.7.11.2.1.9
Node architecture.
Status: current	Access: read-only
OBJECT-TYPE
	AcNodeArchitecture

acRdpMgrTraps		1.3.6.1.4.1.2785.2.7.11.0
OBJECT IDENTIFIER

acRdpMgrRingMapChangedTrap		1.3.6.1.4.1.2785.2.7.11.0.1
The ring map obtained by RDP has changed.
Status: current	Access: read-only
NOTIFICATION-TYPE

acRdpMgrDuplicateNodeIdTrap		1.3.6.1.4.1.2785.2.7.11.0.2
There are two nodes in the ring with the same node Id.
Status: current	Access: read-only
NOTIFICATION-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor