APPIAN-PPORT-SONET-MIB

File: APPIAN-PPORT-SONET-MIB.mib (191397 bytes)

Imported modules

APPIAN-SMI-MIB SNMPv2-SMI SNMPv2-TC
PerfHist-TC-MIB

Imported symbols

acPport AcAdminStatus AcOpStatus
AcSlotNumber AcPortNumber AcNodeId
MODULE-IDENTITY OBJECT-TYPE Integer32
TEXTUAL-CONVENTION DisplayString TruthValue
PerfIntervalCount

Defined Types

AcTraceString  
A string of up to printable characters, followed by padding NULL characters, and terminated with and characters, for a total of 64 characters. The maximum number of printable characters is 62 and if it's less, it's padded with NULL. Therefore the number of padding NULL characters is 0 to 62.
TEXTUAL-CONVENTION    
  OCTET STRING Size(64)  

AcSonetPortEntry  
SEQUENCE    
  acSonetPortNodeId AcNodeId
  acSonetPortSlot AcSlotNumber
  acSonetPortPort AcPortNumber
  acSonetPortAdminStatus AcAdminStatus
  acSonetPortOpStatus AcOpStatus
  acSonetPortOpCode INTEGER
  acSonetPortMediumType INTEGER
  acSonetPortTimeElapsed Integer32
  acSonetPortValidIntervals Integer32
  acSonetPortMediumLineCoding INTEGER
  acSonetPortMediumLineType INTEGER
  acSonetPortTransmitterEnable TruthValue
  acSonetPortCircuitIdentifier DisplayString
  acSonetPortInvalidIntervals Integer32
  acSonetPortLoopbackConfig INTEGER
  acSonetPortResetCurrentPMregs TruthValue
  acSonetPortResetAllPMregs TruthValue
  acSonetPortConnectionType INTEGER
  acSonetPortRingIdentifier INTEGER
  acSonetPortRingName DisplayString

AcSonetThresholdEntry  
SEQUENCE    
  acSonetThresholdNodeId AcNodeId
  acSonetThresholdSlot AcSlotNumber
  acSonetThresholdPort AcPortNumber
  acSonetThresholdSESSet INTEGER

AcSonetDCCEntry  
SEQUENCE    
  acSonetDCCNodeId AcNodeId
  acSonetDCCSlot AcSlotNumber
  acSonetDCCPort AcPortNumber
  acSonetDCCSectionEnable TruthValue
  acSonetDCCLineEnable TruthValue
  acSonetDCCAppianEnable TruthValue
  acSonetDCCSectionFail TruthValue
  acSonetDCCLineFail TruthValue
  acSonetDCCAppianFail TruthValue

AcSonetSection15MinuteIntervalEntry  
SEQUENCE    
  acSonetSection15MinuteIntervalNodeId AcNodeId
  acSonetSection15MinuteIntervalSlot AcSlotNumber
  acSonetSection15MinuteIntervalPort AcPortNumber
  acSonetSection15MinuteIntervalNumber INTEGER
  acSonetSection15MinuteIntervalValidStats TruthValue
  acSonetSection15MinuteIntervalResetStats TruthValue
  acSonetSection15MinuteIntervalStatus Integer32
  acSonetSection15MinuteIntervalESs PerfIntervalCount
  acSonetSection15MinuteIntervalSESs PerfIntervalCount
  acSonetSection15MinuteIntervalSEFSs PerfIntervalCount
  acSonetSection15MinuteIntervalCVs PerfIntervalCount

AcSonetSectionDayIntervalEntry  
SEQUENCE    
  acSonetSectionDayIntervalNodeId AcNodeId
  acSonetSectionDayIntervalSlot AcSlotNumber
  acSonetSectionDayIntervalPort AcPortNumber
  acSonetSectionDayIntervalNumber INTEGER
  acSonetSectionDayIntervalValidStats TruthValue
  acSonetSectionDayIntervalResetStats TruthValue
  acSonetSectionDayIntervalStatus Integer32
  acSonetSectionDayIntervalESs PerfIntervalCount
  acSonetSectionDayIntervalSESs PerfIntervalCount
  acSonetSectionDayIntervalSEFSs PerfIntervalCount
  acSonetSectionDayIntervalCVs PerfIntervalCount

AcSonetSectionThresholdEntry  
SEQUENCE    
  acSonetSectionThresholdNodeId AcNodeId
  acSonetSectionThresholdSlot AcSlotNumber
  acSonetSectionThresholdPort AcPortNumber
  acSonetSectionThresholdSelectionNum INTEGER
  acSonetSectionThresholdAdminStatus AcAdminStatus
  acSonetSectionThresholdESs INTEGER
  acSonetSectionThresholdSESs INTEGER
  acSonetSectionThresholdSEFSs INTEGER
  acSonetSectionThresholdCVs INTEGER

AcSonetSectionTIMEntry  
SEQUENCE    
  acSonetSectionTIMNodeId AcNodeId
  acSonetSectionTIMSlot AcSlotNumber
  acSonetSectionTIMPort AcPortNumber
  acSonetSectionTIMGenerateEnable TruthValue
  acSonetSectionTIMDetectEnable TruthValue
  acSonetSectionTIMTransmitedString AcTraceString
  acSonetSectionTIMExpectedString AcTraceString
  acSonetSectionTIMReceivedString AcTraceString
  acSonetSectionTIMFailure TruthValue
  acSonetSectionTIMFormat INTEGER
  acSonetSectionTIMMismatchZeros TruthValue

AcSonetSectionSSMEntry  
SEQUENCE    
  acSonetSectionSSMNodeId AcNodeId
  acSonetSectionSSMSlot AcSlotNumber
  acSonetSectionSSMPort AcPortNumber
  acSonetSectionSSMDetectEnable TruthValue
  acSonetSectionSSMTransmitedValue INTEGER
  acSonetSectionSSMReceivedValue INTEGER

AcSonetLine15MinuteIntervalEntry  
SEQUENCE    
  acSonetLine15MinuteIntervalNodeId AcNodeId
  acSonetLine15MinuteIntervalSlot AcSlotNumber
  acSonetLine15MinuteIntervalPort AcPortNumber
  acSonetLine15MinuteIntervalNumber INTEGER
  acSonetLine15MinuteIntervalValidStats TruthValue
  acSonetLine15MinuteIntervalResetStats TruthValue
  acSonetLine15MinuteIntervalStatus Integer32
  acSonetLine15MinuteIntervalESs PerfIntervalCount
  acSonetLine15MinuteIntervalSESs PerfIntervalCount
  acSonetLine15MinuteIntervalCVs PerfIntervalCount
  acSonetLine15MinuteIntervalUASs PerfIntervalCount
  acSonetLine15MinuteIntervalBER PerfIntervalCount

AcSonetLineDayIntervalEntry  
SEQUENCE    
  acSonetLineDayIntervalNodeId AcNodeId
  acSonetLineDayIntervalSlot AcSlotNumber
  acSonetLineDayIntervalPort AcPortNumber
  acSonetLineDayIntervalNumber INTEGER
  acSonetLineDayIntervalValidStats TruthValue
  acSonetLineDayIntervalResetStats TruthValue
  acSonetLineDayIntervalStatus Integer32
  acSonetLineDayIntervalESs PerfIntervalCount
  acSonetLineDayIntervalSESs PerfIntervalCount
  acSonetLineDayIntervalCVs PerfIntervalCount
  acSonetLineDayIntervalUASs PerfIntervalCount
  acSonetLineDayIntervalBER PerfIntervalCount

AcSonetLineThresholdEntry  
SEQUENCE    
  acSonetLineThresholdNodeId AcNodeId
  acSonetLineThresholdSlot AcSlotNumber
  acSonetLineThresholdPort AcPortNumber
  acSonetLineThresholdSelectionNum INTEGER
  acSonetLineThresholdAdminStatus AcAdminStatus
  acSonetLineThresholdESs INTEGER
  acSonetLineThresholdSESs INTEGER
  acSonetLineThresholdCVs INTEGER
  acSonetLineThresholdUASs INTEGER

AcSonetFarEndLine15MinuteIntervalEntry  
SEQUENCE    
  acSonetFarEndLine15MinuteIntervalNodeId AcNodeId
  acSonetFarEndLine15MinuteIntervalSlot AcSlotNumber
  acSonetFarEndLine15MinuteIntervalPort AcPortNumber
  acSonetFarEndLine15MinuteIntervalNumber INTEGER
  acSonetFarEndLine15MinuteIntervalValidStats TruthValue
  acSonetFarEndLine15MinuteIntervalResetStats TruthValue
  acSonetFarEndLine15MinuteIntervalESs PerfIntervalCount
  acSonetFarEndLine15MinuteIntervalSESs PerfIntervalCount
  acSonetFarEndLine15MinuteIntervalCVs PerfIntervalCount
  acSonetFarEndLine15MinuteIntervalUASs PerfIntervalCount

AcSonetFarEndLineDayIntervalEntry  
SEQUENCE    
  acSonetFarEndLineDayIntervalNodeId AcNodeId
  acSonetFarEndLineDayIntervalSlot AcSlotNumber
  acSonetFarEndLineDayIntervalPort AcPortNumber
  acSonetFarEndLineDayIntervalNumber INTEGER
  acSonetFarEndLineDayIntervalValidStats TruthValue
  acSonetFarEndLineDayIntervalResetStats TruthValue
  acSonetFarEndLineDayIntervalESs PerfIntervalCount
  acSonetFarEndLineDayIntervalSESs PerfIntervalCount
  acSonetFarEndLineDayIntervalCVs PerfIntervalCount
  acSonetFarEndLineDayIntervalUASs PerfIntervalCount

AcSonetFarEndLineThresholdEntry  
SEQUENCE    
  acSonetFarEndLineThresholdNodeId AcNodeId
  acSonetFarEndLineThresholdSlot AcSlotNumber
  acSonetFarEndLineThresholdPort AcPortNumber
  acSonetFarEndLineThresholdSelectionNum INTEGER
  acSonetFarEndLineThresholdAdminStatus AcAdminStatus
  acSonetFarEndLineThresholdESs INTEGER
  acSonetFarEndLineThresholdSESs INTEGER
  acSonetFarEndLineThresholdCVs INTEGER
  acSonetFarEndLineThresholdUASs INTEGER

AcSonetPath15MinuteIntervalEntry  
SEQUENCE    
  acSonetPath15MinuteIntervalNodeId AcNodeId
  acSonetPath15MinuteIntervalSlot AcSlotNumber
  acSonetPath15MinuteIntervalPort AcPortNumber
  acSonetPath15MinuteIntervalPath INTEGER
  acSonetPath15MinuteIntervalNumber INTEGER
  acSonetPath15MinuteIntervalStatus Integer32
  acSonetPath15MinuteIntervalValidStats TruthValue
  acSonetPath15MinuteIntervalResetStats TruthValue
  acSonetPath15MinuteIntervalESs PerfIntervalCount
  acSonetPath15MinuteIntervalSESs PerfIntervalCount
  acSonetPath15MinuteIntervalCVs PerfIntervalCount
  acSonetPath15MinuteIntervalUASs PerfIntervalCount
  acSonetPath15MinuteIntervalBER PerfIntervalCount

AcSonetPathDayIntervalEntry  
SEQUENCE    
  acSonetPathDayIntervalNodeId AcNodeId
  acSonetPathDayIntervalSlot AcSlotNumber
  acSonetPathDayIntervalPort AcPortNumber
  acSonetPathDayIntervalPath INTEGER
  acSonetPathDayIntervalNumber INTEGER
  acSonetPathDayIntervalStatus Integer32
  acSonetPathDayIntervalValidStats TruthValue
  acSonetPathDayIntervalResetStats TruthValue
  acSonetPathDayIntervalESs PerfIntervalCount
  acSonetPathDayIntervalSESs PerfIntervalCount
  acSonetPathDayIntervalCVs PerfIntervalCount
  acSonetPathDayIntervalUASs PerfIntervalCount
  acSonetPathDayIntervalBER PerfIntervalCount

AcSonetPathThresholdEntry  
SEQUENCE    
  acSonetPathThresholdNodeId AcNodeId
  acSonetPathThresholdSlot AcSlotNumber
  acSonetPathThresholdPort AcPortNumber
  acSonetPathThresholdPath INTEGER
  acSonetPathThresholdSelectionNum INTEGER
  acSonetPathThresholdAdminStatus AcAdminStatus
  acSonetPathThresholdESs INTEGER
  acSonetPathThresholdSESs INTEGER
  acSonetPathThresholdCVs INTEGER
  acSonetPathThresholdUASs INTEGER

AcSonetPathRDIEntry  
SEQUENCE    
  acSonetPathRDINodeId AcNodeId
  acSonetPathRDISlot AcSlotNumber
  acSonetPathRDIPort AcPortNumber
  acSonetPathRDIPath INTEGER
  acSonetPathRDIOpMode INTEGER

AcSonetPathTIMEntry  
SEQUENCE    
  acSonetPathTIMNodeId AcNodeId
  acSonetPathTIMSlot AcSlotNumber
  acSonetPathTIMPort AcPortNumber
  acSonetPathTIMPath INTEGER
  acSonetPathTIMGenerateEnable TruthValue
  acSonetPathTIMDetectEnable TruthValue
  acSonetPathTIMTransmitedString AcTraceString
  acSonetPathTIMExpectedString AcTraceString
  acSonetPathTIMReceivedString AcTraceString
  acSonetPathTIMFailure TruthValue
  acSonetPathTIMFormat INTEGER
  acSonetPathTIMMismatchZeros TruthValue

AcSonetPathPLMEntry  
SEQUENCE    
  acSonetPathPLMNodeId AcNodeId
  acSonetPathPLMSlot AcSlotNumber
  acSonetPathPLMPort AcPortNumber
  acSonetPathPLMPath INTEGER
  acSonetPathPLMDetectEnable TruthValue
  acSonetPathPLMTransmitedValue INTEGER
  acSonetPathPLMExpectedValue INTEGER
  acSonetPathPLMReceivedValue INTEGER
  acSonetPathPLMMismatchFailure TruthValue
  acSonetPathPLMUnequipped TruthValue

AcSonetFarEndPath15MinuteIntervalEntry  
SEQUENCE    
  acSonetFarEndPath15MinuteIntervalNodeId AcNodeId
  acSonetFarEndPath15MinuteIntervalSlot AcSlotNumber
  acSonetFarEndPath15MinuteIntervalPort AcPortNumber
  acSonetFarEndPath15MinuteIntervalPath INTEGER
  acSonetFarEndPath15MinuteIntervalNumber INTEGER
  acSonetFarEndPath15MinuteIntervalValidStats TruthValue
  acSonetFarEndPath15MinuteIntervalResetStats TruthValue
  acSonetFarEndPath15MinuteIntervalESs PerfIntervalCount
  acSonetFarEndPath15MinuteIntervalSESs PerfIntervalCount
  acSonetFarEndPath15MinuteIntervalCVs PerfIntervalCount
  acSonetFarEndPath15MinuteIntervalUASs PerfIntervalCount

AcSonetFarEndPathDayIntervalEntry  
SEQUENCE    
  acSonetFarEndPathDayIntervalNodeId AcNodeId
  acSonetFarEndPathDayIntervalSlot AcSlotNumber
  acSonetFarEndPathDayIntervalPort AcPortNumber
  acSonetFarEndPathDayIntervalPath INTEGER
  acSonetFarEndPathDayIntervalNumber INTEGER
  acSonetFarEndPathDayIntervalValidStats TruthValue
  acSonetFarEndPathDayIntervalResetStats TruthValue
  acSonetFarEndPathDayIntervalESs PerfIntervalCount
  acSonetFarEndPathDayIntervalSESs PerfIntervalCount
  acSonetFarEndPathDayIntervalCVs PerfIntervalCount
  acSonetFarEndPathDayIntervalUASs PerfIntervalCount

AcSonetFarEndPathThresholdEntry  
SEQUENCE    
  acSonetFarEndPathThresholdNodeId AcNodeId
  acSonetFarEndPathThresholdSlot AcSlotNumber
  acSonetFarEndPathThresholdPort AcPortNumber
  acSonetFarEndPathThresholdPath INTEGER
  acSonetFarEndPathThresholdSelectionNum INTEGER
  acSonetFarEndPathThresholdAdminStatus AcAdminStatus
  acSonetFarEndPathThresholdESs INTEGER
  acSonetFarEndPathThresholdSESs INTEGER
  acSonetFarEndPathThresholdCVs INTEGER
  acSonetFarEndPathThresholdUASs INTEGER

AcSonetVT15MinuteIntervalEntry  
SEQUENCE    
  acSonetVT15MinuteIntervalNodeId AcNodeId
  acSonetVT15MinuteIntervalSlot AcSlotNumber
  acSonetVT15MinuteIntervalPort AcPortNumber
  acSonetVT15MinuteIntervalVT INTEGER
  acSonetVT15MinuteIntervalNumber INTEGER
  acSonetVT15MinuteIntervalStatus Integer32
  acSonetVT15MinuteIntervalValidStats TruthValue
  acSonetVT15MinuteIntervalResetStats TruthValue
  acSonetVT15MinuteIntervalESs PerfIntervalCount
  acSonetVT15MinuteIntervalSESs PerfIntervalCount
  acSonetVT15MinuteIntervalCVs PerfIntervalCount
  acSonetVT15MinuteIntervalUASs PerfIntervalCount
  acSonetVT15MinuteIntervalBER PerfIntervalCount

AcSonetVTDayIntervalEntry  
SEQUENCE    
  acSonetVTDayIntervalNodeId AcNodeId
  acSonetVTDayIntervalSlot AcSlotNumber
  acSonetVTDayIntervalPort AcPortNumber
  acSonetVTDayIntervalVT INTEGER
  acSonetVTDayIntervalNumber INTEGER
  acSonetVTDayIntervalStatus Integer32
  acSonetVTDayIntervalValidStats TruthValue
  acSonetVTDayIntervalResetStats TruthValue
  acSonetVTDayIntervalESs PerfIntervalCount
  acSonetVTDayIntervalSESs PerfIntervalCount
  acSonetVTDayIntervalCVs PerfIntervalCount
  acSonetVTDayIntervalUASs PerfIntervalCount
  acSonetVTDayIntervalBER PerfIntervalCount

AcSonetVTThresholdEntry  
SEQUENCE    
  acSonetVTThresholdNodeId AcNodeId
  acSonetVTThresholdSlot AcSlotNumber
  acSonetVTThresholdPort AcPortNumber
  acSonetVTThresholdVT INTEGER
  acSonetVTThresholdSelectionNum INTEGER
  acSonetVTThresholdAdminStatus AcAdminStatus
  acSonetVTThresholdESs INTEGER
  acSonetVTThresholdSESs INTEGER
  acSonetVTThresholdCVs INTEGER
  acSonetVTThresholdUASs INTEGER

AcSonetVTRDIEntry  
SEQUENCE    
  acSonetVTRDINodeId AcNodeId
  acSonetVTRDISlot AcSlotNumber
  acSonetVTRDIPort AcPortNumber
  acSonetVTRDIVT INTEGER
  acSonetVTRDIOpMode INTEGER

AcSonetVTPLMEntry  
SEQUENCE    
  acSonetVTPLMNodeId AcNodeId
  acSonetVTPLMSlot AcSlotNumber
  acSonetVTPLMPort AcPortNumber
  acSonetVTPLMVT INTEGER
  acSonetVTPLMDetectEnable TruthValue
  acSonetVTPLMTransmitedValue INTEGER
  acSonetVTPLMExpectedValue INTEGER
  acSonetVTPLMReceivedValue INTEGER
  acSonetVTPLMMismatchFailure TruthValue
  acSonetVTPLMUnequipped TruthValue

AcSonetFarEndVT15MinuteIntervalEntry  
SEQUENCE    
  acSonetFarEndVT15MinuteIntervalNodeId AcNodeId
  acSonetFarEndVT15MinuteIntervalSlot AcSlotNumber
  acSonetFarEndVT15MinuteIntervalPort AcPortNumber
  acSonetFarEndVT15MinuteIntervalVT INTEGER
  acSonetFarEndVT15MinuteIntervalNumber INTEGER
  acSonetFarEndVT15MinuteIntervalValidStats TruthValue
  acSonetFarEndVT15MinuteIntervalResetStats TruthValue
  acSonetFarEndVT15MinuteIntervalESs PerfIntervalCount
  acSonetFarEndVT15MinuteIntervalSESs PerfIntervalCount
  acSonetFarEndVT15MinuteIntervalCVs PerfIntervalCount
  acSonetFarEndVT15MinuteIntervalUASs PerfIntervalCount

AcSonetFarEndVTDayIntervalEntry  
SEQUENCE    
  acSonetFarEndVTDayIntervalNodeId AcNodeId
  acSonetFarEndVTDayIntervalSlot AcSlotNumber
  acSonetFarEndVTDayIntervalPort AcPortNumber
  acSonetFarEndVTDayIntervalVT INTEGER
  acSonetFarEndVTDayIntervalNumber INTEGER
  acSonetFarEndVTDayIntervalValidStats TruthValue
  acSonetFarEndVTDayIntervalResetStats TruthValue
  acSonetFarEndVTDayIntervalESs PerfIntervalCount
  acSonetFarEndVTDayIntervalSESs PerfIntervalCount
  acSonetFarEndVTDayIntervalCVs PerfIntervalCount
  acSonetFarEndVTDayIntervalUASs PerfIntervalCount

AcSonetFarEndVTThresholdEntry  
SEQUENCE    
  acSonetFarEndVTThresholdNodeId AcNodeId
  acSonetFarEndVTThresholdSlot AcSlotNumber
  acSonetFarEndVTThresholdPort AcPortNumber
  acSonetFarEndVTThresholdVT INTEGER
  acSonetFarEndVTThresholdSelectionNum INTEGER
  acSonetFarEndVTThresholdAdminStatus AcAdminStatus
  acSonetFarEndVTThresholdESs INTEGER
  acSonetFarEndVTThresholdSESs INTEGER
  acSonetFarEndVTThresholdCVs INTEGER
  acSonetFarEndVTThresholdUASs INTEGER

AcSonetPortProtectionEntry  
SEQUENCE    
  acSonetPortProtectionNodeId AcNodeId
  acSonetPortProtectionSlot AcSlotNumber
  acSonetPortProtectionPort AcPortNumber
  acSonetPortProtectionType INTEGER

AcSonetLineProtectionEntry  
SEQUENCE    
  acSonetLineProtectionNodeId AcNodeId
  acSonetLineProtectionSlot AcSlotNumber
  acSonetLineProtectionPort AcPortNumber
  acSonetLineProtectionArchitecture INTEGER
  acSonetLineProtectionOpMode INTEGER
  acSonetLineProtectionSwitchType INTEGER
  acSonetLineProtectionSFThreshold Integer32
  acSonetLineProtectionSDThreshold Integer32
  acSonetLineProtectionActiveTraffic TruthValue
  acSonetLineProtectionProtectionSwitch TruthValue
  acSonetLineProtectionFail TruthValue
  acSonetLineProtectionChannelMismatchFail TruthValue
  acSonetLineProtectionModeMismatchFail TruthValue
  acSonetLineProtectionFarEndLineFail TruthValue
  acSonetLineProtectionWTRTime Integer32
  acSonetLineProtectionManCommand INTEGER

AcSonetPathProtectionEntry  
SEQUENCE    
  acSonetPathProtectionNodeId AcNodeId
  acSonetPathProtectionSlot AcSlotNumber
  acSonetPathProtectionPort AcPortNumber
  acSonetPathProtectionPath INTEGER
  acSonetPathProtectionSwitchType INTEGER
  acSonetPathProtectionSFThreshold Integer32
  acSonetPathProtectionSDThreshold Integer32
  acSonetPathProtectionActiveTraffic TruthValue
  acSonetPathProtectionProtectionSwitch TruthValue
  acSonetPathProtectionWTRTime Integer32
  acSonetPathProtectionWTITime Integer32
  acSonetPathProtectionWTCTime Integer32
  acSonetPathProtectionWTRelTime Integer32
  acSonetPathProtectionManSwitch INTEGER
  acSonetPathProtectionSwitchOpStatus INTEGER
  acSonetPathProtectionProtectionMode INTEGER

AcSonetVTProtectionEntry  
SEQUENCE    
  acSonetVTProtectionNodeId AcNodeId
  acSonetVTProtectionSlot AcSlotNumber
  acSonetVTProtectionPort AcPortNumber
  acSonetVTProtectionVT INTEGER
  acSonetVTProtectionSwitchType INTEGER
  acSonetVTProtectionSFThreshold Integer32
  acSonetVTProtectionSDThreshold Integer32
  acSonetVTProtectionProtectionSwitch TruthValue
  acSonetVTProtectionWTRTime Integer32
  acSonetVTProtectionManSwitch INTEGER
  acSonetVTProtectionActiveTraffic TruthValue

Defined Values

acSonet 1.3.6.1.4.1.2785.2.3.6
The MIB module to describe SONET/SDH objects.
MODULE-IDENTITY    

acSonetObjects 1.3.6.1.4.1.2785.2.3.6.1
OBJECT IDENTIFIER    

acSonetObjectsPath 1.3.6.1.4.1.2785.2.3.6.2
OBJECT IDENTIFIER    

acSonetObjectsVT 1.3.6.1.4.1.2785.2.3.6.3
OBJECT IDENTIFIER    

acSonetPort 1.3.6.1.4.1.2785.2.3.6.1.1
OBJECT IDENTIFIER    

acSonetSection 1.3.6.1.4.1.2785.2.3.6.1.2
OBJECT IDENTIFIER    

acSonetLine 1.3.6.1.4.1.2785.2.3.6.1.3
OBJECT IDENTIFIER    

acSonetFarEndLine 1.3.6.1.4.1.2785.2.3.6.1.4
OBJECT IDENTIFIER    

acSonetPath 1.3.6.1.4.1.2785.2.3.6.2.1
OBJECT IDENTIFIER    

acSonetFarEndPath 1.3.6.1.4.1.2785.2.3.6.2.2
OBJECT IDENTIFIER    

acSonetVT 1.3.6.1.4.1.2785.2.3.6.3.1
OBJECT IDENTIFIER    

acSonetFarEndVT 1.3.6.1.4.1.2785.2.3.6.3.2
OBJECT IDENTIFIER    

acSonetPortTable 1.3.6.1.4.1.2785.2.3.6.1.1.1
The SONET/SDH Port table which must be created by the management client.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPortEntry

acSonetPortEntry 1.3.6.1.4.1.2785.2.3.6.1.1.1.1
An entry in the SONET/SDH Port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPortEntry  

acSonetPortNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPortSlot 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPortPort 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPortAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.4
Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.
Status: current Access: read-create
OBJECT-TYPE    
  AcAdminStatus  

acSonetPortOpStatus 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.5
The current operational status for the SONET module controlling this port.
Status: current Access: read-only
OBJECT-TYPE    
  AcOpStatus  

acSonetPortOpCode 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.6
Provides a detailed status code which can be used to isolate a problem or state condition reported in acSonetPortOpStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetPortMediumType 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.7
This variable identifies whether a SONET or a SDH signal is used across this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

acSonetPortTimeElapsed 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.8
The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..900  

acSonetPortValidIntervals 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.9
The number of previous 15-minute intervals for which data was collected. A SONET/SDH interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..96  

acSonetPortMediumLineCoding 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.10
This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET/SDH signals (STS-1 and STS-3). The Non-Return to Zero (NRZ) and the Return to Zero are used for optical SONET/SDH signals.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), b3zs(2), cmi(3), nrz(4), rz(5)  

acSonetPortMediumLineType 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.11
This variable describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value acSonetOther should be used when the Line Type is not one of the listed values.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), short-single(2), long-single(3), multi(4), coax(5), utp(6), intermediate(7)  

acSonetPortTransmitterEnable 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.12
Turns the laser on and off.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acSonetPortCircuitIdentifier 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.13
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. Note that the circuit identifier, if available, is also represented by ifPhysAddress.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

acSonetPortInvalidIntervals 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.14
The number of intervals in the range from 0 to acSonetPortValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..96  

acSonetPortLoopbackConfig 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.15
The current loopback state of the SONET/SDH interface. The values mean: none(0) Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. facility(1) The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminal(2) The signal that is about to be transmitted is connected to the associated incoming receiver. other(3) Loopbacks that are not defined here.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), facility(1), terminal(2), other(3)  

acSonetPortResetCurrentPMregs 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.16
Reset Performance Monitoring Registers for current 15 minute and day to zero for entity-related statisics. Reset on receiving a 1, will automatically go to 0 at next 15 minute or day interval.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acSonetPortResetAllPMregs 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.17
Reset Performance Monitoring Registers to zero for all entity-related statisics. Reset on receiving a 1, will automatically go to 0 at next 15 minute or day interval.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acSonetPortConnectionType 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.18
Whether the port is used on the ring side or the interconnect side. An interconnect interface is the one that connects to the ADM.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ring(1), interconnect(2)  

acSonetPortRingIdentifier 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.19
This is a number assigned by carrier. It is contained here as a convenience for carrier and the EMS. It is not used by the device. When used, this should be set in east facing port row in this table. It can also be optionally set in the west facing port row in this table but it must be the same as the set in the east facing port row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

acSonetPortRingName 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.20
An ASCII text name up to 32 characters in length which is assigned to this optical ring. Like the RingIdentifier, this is contained here as a convenience for the carrier and the EMS. It is not used by the device. When used, this should be set in east facing port row in this table. It can also be optionally set in the west facing port row in this table but it must be the same as the set in the east facing port row.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

acSonetThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.1.2
The SONET/SDH Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetThresholdEntry

acSonetThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.1.2.1
An entry in the SONET/SDH Port Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetThresholdEntry  

acSonetThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetThresholdSESSet 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.4
An enumerated integer indicating which recognized set of thresholds that the agent uses for determining severely errored seconds and unavailable time. other(1) None of the following. Bellcore1991(2) Bellcore TR-NWT-000253, 1991 [32], or ANSI T1M1.3/93-005R2, 1993 [22]. See also Appendix B. ansi1993(3) ANSI T1.231, 1993 [31], or Bellcore GR-253-CORE, Issue 2, 1995 [34] itu1995(4) ITU Recommendation G.826, 1995 [33] ansi1997(5) ANSI T1.231, 1997 [35] If a manager changes the value of this object then the SES statistics collected prior to this change must be invalidated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), bellcore(2), ansi93(3), itu(4), ansi97(5)  

acSonetDCCTable 1.3.6.1.4.1.2785.2.3.6.1.1.3
The SONET/SDH DCC Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetDCCEntry

acSonetDCCEntry 1.3.6.1.4.1.2785.2.3.6.1.1.3.1
An entry in the SONET/SDH Port Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetDCCEntry  

acSonetDCCNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetDCCSlot 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetDCCPort 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetDCCSectionEnable 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.4
This variable indicates that the DCC for the section is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetDCCLineEnable 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.5
This variable indicates that the DCC for the line is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetDCCAppianEnable 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.6
This variable indicates that the Appian DCC is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetDCCSectionFail 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.7
This variable indicates that the DCC for the section has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetDCCLineFail 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.8
This variable indicates that the DCC for the line has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetDCCAppianFail 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.9
This variable indicates that the Appian DCC has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetSection15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.2.1
The SONET/SDH Section 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSection15MinuteIntervalEntry

acSonetSection15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.2.1.1
An entry in the SONET/SDH Section 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetSection15MinuteIntervalEntry  

acSonetSection15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetSection15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetSection15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetSection15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.4
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..98  

acSonetSection15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.5
This flag indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetSection15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.6
This flag is used to reset the data for a 15 minute interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetSection15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.7
This variable indicates the status of the interface. The acSonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetSectionNoDefect 2 acSonetSectionLOS 4 acSonetSectionLOF
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acSonetSection15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSection15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSection15MinuteIntervalSEFSs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.10
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSection15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.2.2
The SONET/SDH Section Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionDayIntervalEntry

acSonetSectionDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.2.2.1
An entry in the SONET/SDH Section Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetSectionDayIntervalEntry  

acSonetSectionDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetSectionDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.4
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..31  

acSonetSectionDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.5
This flag indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetSectionDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.6
Flag used to reset the current day interval stats.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetSectionDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.7
This variable indicates the status of the interface. The acSonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetSectionNoDefect 2 acSonetSectionLOS 4 acSonetSectionLOF
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acSonetSectionDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalSEFSs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.10
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.2.3
The SONET/SDH Section Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionThresholdEntry

acSonetSectionThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.2.3.1
An entry in the SONET/SDH Section Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetSectionThresholdEntry  

acSonetSectionThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetSectionThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.4
A number that selects either the 15 thresholds or the day thresholds.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetSectionThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.5
This field is used by the administrator to ensure only one client is performing management operations on this sonet port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AcAdminStatus  

acSonetSectionThresholdESs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.6
The threshold associated with Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetSectionThresholdSESs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.7
The threshold associated with Severely Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetSectionThresholdSEFSs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.8
The threshold associated with Severely Errored Framing Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetSectionThresholdCVs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.9
The threshold associated with Coding Violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetSectionTIMTable 1.3.6.1.4.1.2785.2.3.6.1.2.4
The SONET/SDH Section Trace Identifier Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionTIMEntry

acSonetSectionTIMEntry 1.3.6.1.4.1.2785.2.3.6.1.2.4.1
An entry in the SONET/SDH Section Trace Identifier Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetSectionTIMEntry  

acSonetSectionTIMNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetSectionTIMSlot 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionTIMPort 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionTIMGenerateEnable 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.4
Enables the generation of the Section Trace Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetSectionTIMDetectEnable 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.5
Enables the detection of the Section Trace Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetSectionTIMTransmitedString 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.6
The string that gets sent to the destination.
Status: current Access: read-write
OBJECT-TYPE    
  AcTraceString  

acSonetSectionTIMExpectedString 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.7
The expected string that is to be received.
Status: current Access: read-write
OBJECT-TYPE    
  AcTraceString  

acSonetSectionTIMReceivedString 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.8
The contents of the string that is received.
Status: current Access: read-only
OBJECT-TYPE    
  AcTraceString  

acSonetSectionTIMFailure 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.9
Failure declared of the Section Trace Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetSectionTIMFormat 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.10
Format of Path Trace buffer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER void(0), t64(1), t64-crlf(2), t16(3), t16-msb1(4), t16-crc7(5)  

acSonetSectionTIMMismatchZeros 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.11
Controls whether a received trace message containing all zeros can cause a mismatch defect.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetSectionSSMTable 1.3.6.1.4.1.2785.2.3.6.1.2.5
The SONET/SDH Section Synchronization Status Message Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionSSMEntry

acSonetSectionSSMEntry 1.3.6.1.4.1.2785.2.3.6.1.2.5.1
An entry in the SONET/SDH Section Synchronization Status Message Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetSectionSSMEntry  

acSonetSectionSSMNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetSectionSSMSlot 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionSSMPort 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionSSMDetectEnable 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.4
Enables the detection of the Synchronization Status Message.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetSectionSSMTransmitedValue 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.5
The S1 byte value that gets sent to the destination.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

acSonetSectionSSMReceivedValue 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.6
The S1 byte value that is received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

acSonetLine15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.3.1
The SONET/SDH Line 15Minute Interval Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLine15MinuteIntervalEntry

acSonetLine15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.3.1.1
An entry in the SONET/SDH Line 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetLine15MinuteIntervalEntry  

acSonetLine15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetLine15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetLine15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetLine15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.4
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..98  

acSonetLine15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.5
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLine15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.6
Flag to reset the 15 minute SONET Line interval statistics.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetLine15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.7
This variable indicates the status of the interface. The acSonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetLineNoDefect 2 acSonetLineAIS 4 acSonetLineRDI
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acSonetLine15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.11
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalBER 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.12
The counter associated with the max BER encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.3.2
The SONET/SDH Line Day Interval Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLineDayIntervalEntry

acSonetLineDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.3.2.1
An entry in the SONET/SDH Line Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetLineDayIntervalEntry  

acSonetLineDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetLineDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetLineDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetLineDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.4
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..31  

acSonetLineDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.5
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLineDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.6
Flag to reset the SONET Line Day interval statistics.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetLineDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.7
This variable indicates the status of the interface. The acSonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetLineNoDefect 2 acSonetLineAIS 4 acSonetLineRDI
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acSonetLineDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.11
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalBER 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.12
The counter associated with the max BER encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.3.3
The SONET/SDH Line Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLineThresholdEntry

acSonetLineThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.3.3.1
An entry in the SONET/SDH Line Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetLineThresholdEntry  

acSonetLineThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetLineThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetLineThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetLineThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.4
A number that selects either the 15 thresholds or the day thresholds.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetLineThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.5
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AcAdminStatus  

acSonetLineThresholdESs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.6
The threshold associated with Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetLineThresholdSESs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.7
The threshold associated with Severely Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetLineThresholdCVs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.8
The threshold associated with Coding Violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetLineThresholdUASs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.9
The threshold associated with Unavailable Secondss.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndLine15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.4.1
The SONET/SDH FarEndLine 15Minute Interval Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndLine15MinuteIntervalEntry

acSonetFarEndLine15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.4.1.1
An entry in the SONET/SDH FarEndLine 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndLine15MinuteIntervalEntry  

acSonetFarEndLine15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndLine15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndLine15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndLine15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.4
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..98  

acSonetFarEndLine15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.5
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLine15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.6
Flag to reset the SONET Far End Line 15 minute interval statistics.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLine15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.7
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLine15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.8
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLine15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.9
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLine15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.10
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.4.2
The SONET/SDH FarEndLine Day Interval Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndLineDayIntervalEntry

acSonetFarEndLineDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.4.2.1
An entry in the SONET/SDH FarEndLine Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndLineDayIntervalEntry  

acSonetFarEndLineDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndLineDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndLineDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndLineDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.4
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..31  

acSonetFarEndLineDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.5
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLineDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.6
Flag to reset the SONET far end line day interval statistics.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLineDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.7
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.8
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.9
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.10
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.4.3
The SONET/SDH FarEndLine Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndLineThresholdEntry

acSonetFarEndLineThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.4.3.1
An entry in the SONET/SDH FarEndLine Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndLineThresholdEntry  

acSonetFarEndLineThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndLineThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndLineThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndLineThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.4
A number that selects either the 15 thresholds or the day thresholds.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetFarEndLineThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.5
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AcAdminStatus  

acSonetFarEndLineThresholdESs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.6
The threshold associated with Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndLineThresholdSESs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.7
The threshold associated with Severely Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndLineThresholdCVs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.8
The threshold associated with Coding Violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndLineThresholdUASs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.9
The threshold associated with Unavailable Secondss.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetPath15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.1.1
The SONET/SDH Path 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPath15MinuteIntervalEntry

acSonetPath15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.1.1.1
An entry in the SONET/SDH Path 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPath15MinuteIntervalEntry  

acSonetPath15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPath15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPath15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPath15MinuteIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.4
The STS Path for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetPath15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..98  

acSonetPath15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.6
This variable indicates the status of the interface. The acSonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetPathNoDefect 2 acSonetPathSTSLOP 4 acSonetPathSTSAIS 8 acSonetPathSTSRDI 16 acSonetPathUnequipped 32 acSonetPathPayloadLabelMismatch
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..62  

acSonetPath15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.7
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetPath15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.8
This flag is used to reset the data for a 15 minute interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetPath15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.9
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.10
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.12
The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalBER 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.13
The counter associated with the BER encountered by a Path in the current 15 minute interval. Represents the max value for an interval for number > 1.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.1.2
The SONET/SDH Path Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathDayIntervalEntry

acSonetPathDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.1.2.1
An entry in the SONET/SDH Path Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPathDayIntervalEntry  

acSonetPathDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPathDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPathDayIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.4
The STS Path for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetPathDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..31  

acSonetPathDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.6
This variable indicates the status of the interface. The acSonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetPathNoDefect 2 acSonetPathSTSLOP 4 acSonetPathSTSAIS 8 acSonetPathSTSRDI 16 acSonetPathUnequipped 32 acSonetPathPayloadLabelMismatch
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..62  

acSonetPathDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.7
This variable indicates if the data for this day is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetPathDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.8
This flag is used to reset the data for day interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetPathDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.9
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the past day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.10
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the past day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the past day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.12
The counter associated with the number of Unavailable Seconds encountered by a Path in the past day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalBER 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.13
The counter associated with the BER encountered by a Path in the past day interval.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathThresholdTable 1.3.6.1.4.1.2785.2.3.6.2.1.3
The SONET/SDH Path Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathThresholdEntry

acSonetPathThresholdEntry 1.3.6.1.4.1.2785.2.3.6.2.1.3.1
An entry in the SONET/SDH Path Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPathThresholdEntry  

acSonetPathThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPathThresholdSlot 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathThresholdPort 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPathThresholdPath 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.4
The STS Path for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetPathThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AcAdminStatus  

acSonetPathThresholdESs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.7
The threshold associated with Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdSESs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.8
The threshold associated with Severely Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdCVs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.9
The threshold associated with Coding Violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdUASs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.10
The threshold associated with Unavailable Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetPathRDITable 1.3.6.1.4.1.2785.2.3.6.2.1.4
The SONET/SDH Path RDI Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathRDIEntry

acSonetPathRDIEntry 1.3.6.1.4.1.2785.2.3.6.2.1.4.1
An entry in the SONET/SDH Path RDI Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPathRDIEntry  

acSonetPathRDINodeId 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPathRDISlot 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathRDIPort 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPathRDIPath 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.4
The STS path instance for this port
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetPathRDIOpMode 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.5
The Remote Defect Indiction signals have undergone a number of changes over the years, and now encompass two or even three different versions. See GR-253 6.2.1.3.2 for more information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rdi(1), erdi(2)  

acSonetPathTIMTable 1.3.6.1.4.1.2785.2.3.6.2.1.5
The SONET/SDH Path Trace Identifier Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathTIMEntry

acSonetPathTIMEntry 1.3.6.1.4.1.2785.2.3.6.2.1.5.1
An entry in the SONET/SDH Path Trace Identifier Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPathTIMEntry  

acSonetPathTIMNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPathTIMSlot 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathTIMPort 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPathTIMPath 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.4
The path instance of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetPathTIMGenerateEnable 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.5
Enables the generation of the Path Trace Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetPathTIMDetectEnable 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.6
Enables the detection of the Path Trace Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetPathTIMTransmitedString 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.7
The string that gets sent to the destination.
Status: current Access: read-write
OBJECT-TYPE    
  AcTraceString  

acSonetPathTIMExpectedString 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.8
The expected string that is to be received.
Status: current Access: read-write
OBJECT-TYPE    
  AcTraceString  

acSonetPathTIMReceivedString 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.9
The contents of the string that is received.
Status: current Access: read-only
OBJECT-TYPE    
  AcTraceString  

acSonetPathTIMFailure 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.10
Failure declared of the Path Trace Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetPathTIMFormat 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.11
Format of Path Trace buffer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER void(0), t64(1), t64-crlf(2), t16(3), t16-msb1(4), t16-crc7(5)  

acSonetPathTIMMismatchZeros 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.12
Controls whether a received trace message containing all zeros can cause a mismatch defect.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetPathPLMTable 1.3.6.1.4.1.2785.2.3.6.2.1.6
The SONET/SDH Path Payload Label Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathPLMEntry

acSonetPathPLMEntry 1.3.6.1.4.1.2785.2.3.6.2.1.6.1
An entry in the SONET/SDH Path Payload Label Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPathPLMEntry  

acSonetPathPLMNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPathPLMSlot 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathPLMPort 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPathPLMPath 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.4
The path instance of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetPathPLMDetectEnable 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.5
Enables the detection of the Path Payload Label.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetPathPLMTransmitedValue 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.6
The Path Payload Label that gets sent to the destination. See GR-253 Tables 3-2, 3-3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acSonetPathPLMExpectedValue 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.7
The expected Path Payload Label that is to be received. See GR-253 Tables 3-2, 3-3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acSonetPathPLMReceivedValue 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.8
The contents of the Path Payload Label that is received. See GR-253 Tables 3-2, 3-3.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetPathPLMMismatchFailure 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.9
Mismatch failure declared for the Path Payload Label.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetPathPLMUnequipped 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.10
Unequipped failure declared for the Path Payload Label.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPath15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.2.1
The SONET/SDH FarEndPath 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndPath15MinuteIntervalEntry

acSonetFarEndPath15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.2.1.1
An entry in the SONET/SDH FarEndPath 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndPath15MinuteIntervalEntry  

acSonetFarEndPath15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndPath15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndPath15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndPath15MinuteIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.4
The STS Path for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPath15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..98  

acSonetFarEndPath15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.6
This variable indicates if the data for this far end 15 minute interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPath15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.7
This flag is used to reset the data for far end 15 minute interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPath15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPath15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPath15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPath15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.2.2
The SONET/SDH FarEndPath Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndPathDayIntervalEntry

acSonetFarEndPathDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.2.2.1
An entry in the SONET/SDH FarEndPath Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndPathDayIntervalEntry  

acSonetFarEndPathDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndPathDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndPathDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndPathDayIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.4
The STS Path for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..31  

acSonetFarEndPathDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.6
This variable indicates if the data for this far end day interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPathDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.7
This flag is used to reset the data for far end day interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPathDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndPath in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathThresholdTable 1.3.6.1.4.1.2785.2.3.6.2.2.3
The SONET/SDH FarEndPath Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndPathThresholdEntry

acSonetFarEndPathThresholdEntry 1.3.6.1.4.1.2785.2.3.6.2.2.3.1
An entry in the SONET/SDH FarEndPath Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndPathThresholdEntry  

acSonetFarEndPathThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndPathThresholdSlot 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndPathThresholdPort 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndPathThresholdPath 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.4
The STS Path for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetFarEndPathThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AcAdminStatus  

acSonetFarEndPathThresholdESs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.7
The threshold associated with Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdSESs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.8
The threshold associated with Severely Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdCVs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.9
The threshold associated with Coding Violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdUASs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.10
The threshold associated with Unavailable Secondss.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetVT15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.1.1
The SONET/SDH VT 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVT15MinuteIntervalEntry

acSonetVT15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.1.1.1
An entry in the SONET/SDH VT 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetVT15MinuteIntervalEntry  

acSonetVT15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetVT15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetVT15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetVT15MinuteIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.4
The VT for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetVT15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..98  

acSonetVT15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.7
This variable indicates the status of the interface. The acSonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The acSonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetVTNoDefect 2 acSonetVTLOP 4 acSonetVTPathAIS 8 acSonetVTPathRDI 16 acSonetVTPathRFI 32 acSonetVTUnequipped 64 acSonetVTPayloadLabelMismatch
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..192  

acSonetVT15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.8
This variable indicates if the data for this VT 15 minute interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetVT15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.9
This flag is used to reset the data for this VT 15 minute interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetVT15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.10
The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.11
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.12
The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.13
The counter associated with the number of Unavailable Seconds encountered by a VT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalBER 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.14
The counter associated with the BER encountered by a VT in the current 15 minute interval. Represents the max BER for the interval when number > 1.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.1.2
The SONET/SDH VT Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTDayIntervalEntry

acSonetVTDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.1.2.1
An entry in the SONET/SDH VT Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetVTDayIntervalEntry  

acSonetVTDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetVTDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetVTDayIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.4
The VT for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetVTDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..31  

acSonetVTDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.6
This variable indicates the status of the interface. The acSonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The acSonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetVTNoDefect 2 acSonetVTLOP 4 acSonetVTPathAIS 8 acSonetVTPathRDI 16 acSonetVTPathRFI 32 acSonetVTUnequipped 64 acSonetVTPayloadLabelMismatch
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..192  

acSonetVTDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.7
This variable indicates if the data for this VT Day interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetVTDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.8
This flag is used to reset the data for this VT Day interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetVTDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.9
The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the last day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.10
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the last day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the last day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.12
The counter associated with the number of Unavailable Seconds encountered by a VT in the last day interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalBER 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.13
The counter associated with the max BER encountered by a VT in a day.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTThresholdTable 1.3.6.1.4.1.2785.2.3.6.3.1.3
The SONET/SDH VT Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTThresholdEntry

acSonetVTThresholdEntry 1.3.6.1.4.1.2785.2.3.6.3.1.3.1
An entry in the SONET/SDH VT Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetVTThresholdEntry  

acSonetVTThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetVTThresholdSlot 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTThresholdPort 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetVTThresholdVT 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.4
The VT for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetVTThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AcAdminStatus  

acSonetVTThresholdESs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.7
The threshold associated with Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdSESs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.8
The threshold associated with Severely Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdCVs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.9
The threshold associated with Coding Violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdUASs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.10
The threshold associated with Unavailable Secondss.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetVTRDITable 1.3.6.1.4.1.2785.2.3.6.3.1.4
The SONET/SDH VT RDI Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTRDIEntry

acSonetVTRDIEntry 1.3.6.1.4.1.2785.2.3.6.3.1.4.1
An entry in the SONET/SDH VT RDI Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetVTRDIEntry  

acSonetVTRDINodeId 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetVTRDISlot 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTRDIPort 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetVTRDIVT 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.4
The Virtual Tributary (VT) instance.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetVTRDIOpMode 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.5
The Remote Defect Indiction signals have undergone a number of changes over the years, and now encompass two or even three different versions. See GR-253 6.2.1.3.3 for more information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rdi(1), erdi(2)  

acSonetVTPLMTable 1.3.6.1.4.1.2785.2.3.6.3.1.5
The SONET/SDH VT Payload Label Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTPLMEntry

acSonetVTPLMEntry 1.3.6.1.4.1.2785.2.3.6.3.1.5.1
An entry in the SONET/SDH VT Payload Label Mismatch Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetVTPLMEntry  

acSonetVTPLMNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetVTPLMSlot 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTPLMPort 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetVTPLMVT 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.4
The Virtual Tributary (VT) instance.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetVTPLMDetectEnable 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.5
Enables the detection of the VT Payload Label.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetVTPLMTransmitedValue 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.6
The VT Payload Label that gets sent to the destination. See GR-253 Tables 3-4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acSonetVTPLMExpectedValue 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.7
The expected VT Payload Label that is to be received. See GR-253 Tables 3-4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acSonetVTPLMReceivedValue 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.8
The contents of the VT Payload Label that is received. See GR-253 Tables 3-4.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetVTPLMMismatchFailure 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.9
Mismatch failure declared for the VT Payload Label.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetVTPLMUnequipped 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.10
Unequipped failure declared for the VT Payload Label.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVT15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.2.1
The SONET/SDH FarEndVT 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndVT15MinuteIntervalEntry

acSonetFarEndVT15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.2.1.1
An entry in the SONET/SDH FarEndVT 15Minute Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndVT15MinuteIntervalEntry  

acSonetFarEndVT15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndVT15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndVT15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndVT15MinuteIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.4
The VT for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVT15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..98  

acSonetFarEndVT15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.6
This variable indicates if the data for this VT FE 15 minute interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVT15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.7
This flag is used to reset the data for this VT FE 15 minute interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVT15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVT15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVT15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVT15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.2.2
The SONET/SDH FarEndVT Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndVTDayIntervalEntry

acSonetFarEndVTDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.2.2.1
An entry in the SONET/SDH FarEndVT Day Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndVTDayIntervalEntry  

acSonetFarEndVTDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndVTDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndVTDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndVTDayIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.4
The VT for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..31  

acSonetFarEndVTDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.6
This variable indicates if the data for this VT Day interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVTDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.7
This flag is used to reset the data for this VT Day interval.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVTDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndVT in the current 15 minute interval.
Status: current Access: read-only
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTThresholdTable 1.3.6.1.4.1.2785.2.3.6.3.2.3
The SONET/SDH FarEndVT Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndVTThresholdEntry

acSonetFarEndVTThresholdEntry 1.3.6.1.4.1.2785.2.3.6.3.2.3.1
An entry in the SONET/SDH FarEndVT Threshold Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetFarEndVTThresholdEntry  

acSonetFarEndVTThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndVTThresholdSlot 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndVTThresholdPort 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndVTThresholdVT 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.4
The VT for which the set of statistics is available.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetFarEndVTThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AcAdminStatus  

acSonetFarEndVTThresholdESs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.7
The threshold associated with Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdSESs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.8
The threshold associated with Severely Errored Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdCVs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.9
The threshold associated with Coding Violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdUASs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.10
The threshold associated with Unavailable Secondss.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

acSonetPortProtectionTable 1.3.6.1.4.1.2785.2.3.6.1.1.4
The SONET/SDH Port Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPortProtectionEntry

acSonetPortProtectionEntry 1.3.6.1.4.1.2785.2.3.6.1.1.4.1
An entry in the SONET/SDH Port Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPortProtectionEntry  

acSonetPortProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPortProtectionSlot 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPortProtectionPort 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPortProtectionType 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.4
This variable statically defines the purpose of the physical port connection as the working or protection port. It does not convey whether the system has undergone a protection switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER working(1), protection(2), west(3), east(4), match(5), ring(6)  

acSonetLineProtectionTable 1.3.6.1.4.1.2785.2.3.6.1.3.4
The SONET/SDH Line Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLineProtectionEntry

acSonetLineProtectionEntry 1.3.6.1.4.1.2785.2.3.6.1.3.4.1
An entry in the SONET/SDH Line Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetLineProtectionEntry  

acSonetLineProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetLineProtectionSlot 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetLineProtectionPort 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetLineProtectionArchitecture 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.4
This variable defines the APS architecture as either 1+1 or 1:1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), one-plus-one(2), one-to-one(3)  

acSonetLineProtectionOpMode 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.5
This variable defines the APS mode as either unidirectional or bidirectional.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unidirectional(1), bidirectional(2)  

acSonetLineProtectionSwitchType 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.6
This variable defines the APS switch type as either revertive or nonrevertive.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

acSonetLineProtectionSFThreshold 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.7
The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..5  

acSonetLineProtectionSDThreshold 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.8
The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..9  

acSonetLineProtectionActiveTraffic 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.9
This variable indicates when active traffic is on this line.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionProtectionSwitch 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.10
This variable indicates when a protection switch is currently affecting this line.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.11
This variable indicates when a protection switching failure has taken place. See GR-253, 6.2.1.1.6.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionChannelMismatchFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.12
This variable indicates when a protection switching channel mismatch failure has taken place. See GR-253, 6.2.1.1.6.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionModeMismatchFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.13
This variable indicates when a protection switching mode mismatch failure has taken place. See GR-253, 6.2.1.1.6.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionFarEndLineFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.14
This variable indicates when a protection switching far-end protection-line failure has taken place. See GR-253, 6.2.1.1.6.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionWTRTime 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.15
This variable defines the APS Wait To Restore time. The time has one second granularity and may have a value in the range from 300 seconds (5 minutes) to 720 seconds (12 minutes).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 300..720  

acSonetLineProtectionManCommand 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.16
This variable defines the APS manually initiated commands.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), lockout-protection(2), force-working(3), force-protection(4), manual-working(5), manual-protection(6), exercise(7), lockout-working(8), clear-lockout-working(9)  

acSonetPathProtectionTable 1.3.6.1.4.1.2785.2.3.6.2.1.7
The SONET/SDH Path Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathProtectionEntry

acSonetPathProtectionEntry 1.3.6.1.4.1.2785.2.3.6.2.1.7.1
An entry in the SONET/SDH Path Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetPathProtectionEntry  

acSonetPathProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetPathProtectionSlot 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathProtectionPort 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetPathProtectionPath 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.4
The STS-1 path for the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetPathProtectionSwitchType 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.5
This variable defines the path switch type as either revertive or nonrevertive.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

acSonetPathProtectionSFThreshold 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.6
The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching. The value used is the exponent to a power of 10, so 3 means 10E-3.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..5  

acSonetPathProtectionSDThreshold 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.7
The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching. The value used is the exponent to a power of 10, so 6 means 10E-6.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..9  

acSonetPathProtectionActiveTraffic 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.8
This variable indicates when ODP or UPSR active traffic is on this path.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetPathProtectionProtectionSwitch 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.9
This variable indicates when either a UPSR or an ODP protection switch is currently affecting this path.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetPathProtectionWTRTime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.10
This variable defines the ODP or UPSR Wait To Restore time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds(12 minutes).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..720  

acSonetPathProtectionWTITime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.11
This variable defines the ODP Wait To Idle time. The time has one second granularity and may have a value in the range from 1 to 50 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..50  

acSonetPathProtectionWTCTime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.12
This variable defines the ODP Wait To Clear time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds (12 minutes).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..720  

acSonetPathProtectionWTRelTime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.13
This variable defines the ODP Wait To Release time. The time has one second granularity and may have a value in the range from 1 to 50 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..50  

acSonetPathProtectionManSwitch 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.14
This variable defines the ODP and UPSR manually initiated commands. Entries 7..10 are used in ODP only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), lockout-protection(2), force-working(3), force-protection(4), manual-working(5), manual-protection(6), exercise(7), lockout-working(8), clear-lockout-working(9), extra-traffic(10)  

acSonetPathProtectionSwitchOpStatus 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.15
This variable defines the current switch condition of an ODP path.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), bridged(2), switched(3), passthrough(4), extra-traffic(5)  

acSonetPathProtectionProtectionMode 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.16
!! This object *MUST* be set before any other object is accessed. !! This is the type of protection switching to be used if independent path level protection switching is enabled. This is similar to the acTimeSlotPathProtectionMode object that resides in the timeslot table. Refer to it for a description of the enumerations.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER odp(1), upsr(2)  

acSonetVTProtectionTable 1.3.6.1.4.1.2785.2.3.6.3.1.6
The SONET/SDH VT Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTProtectionEntry

acSonetVTProtectionEntry 1.3.6.1.4.1.2785.2.3.6.3.1.6.1
An entry in the SONET/SDH VT Protection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetVTProtectionEntry  

acSonetVTProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcNodeId  

acSonetVTProtectionSlot 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.2
The physical slot number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTProtectionPort 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.3
The physical port number of the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AcPortNumber  

acSonetVTProtectionVT 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.4
The VT path instance for the port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

acSonetVTProtectionSwitchType 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.5
This variable defines the VT path switch type as either revertive or nonrevertive.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

acSonetVTProtectionSFThreshold 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.6
The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..5  

acSonetVTProtectionSDThreshold 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.7
The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..8  

acSonetVTProtectionProtectionSwitch 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.8
This variable indicates when a protection switch is currently affecting this path.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acSonetVTProtectionWTRTime 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.9
This variable defines the UPSR Wait To Restore time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds(12 minutes).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..720  

acSonetVTProtectionManSwitch 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.10
This variable defines the UPSR manually initiated commands.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), lockout-protection(2), force-working(3), force-protection(4), manual-working(5), manual-protection(6)  

acSonetVTProtectionActiveTraffic 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.11
This variable indicates when UPSR active traffic is on this path.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor