APPIAN-PPORT-DS1-MIB

File: APPIAN-PPORT-DS1-MIB.mib (89638 bytes)

Imported modules

APPIAN-SMI-MIB	APPIAN-CHASSIS-MIB	SNMPv2-TC
SNMPv2-SMI	PerfHist-TC-MIB

Imported symbols

acPport	AcOpStatus	AcSlotNumber
AcPortNumber	AcAdminStatus	AcNodeId
acChassisCurrentTime	acChassisRingId	DisplayString
TimeStamp	TruthValue	MODULE-IDENTITY
OBJECT-TYPE	NOTIFICATION-TYPE	PerfIntervalCount

Defined Types

AcDs1ConfigEntry
SEQUENCE
	acDs1ConfigNodeId	AcNodeId
	acDs1ConfigSlot	AcSlotNumber
	acDs1ConfigPort	AcPortNumber
	acDs1ConfigAdminStatus	AcAdminStatus
	acDs1ConfigOpStatus	AcOpStatus
	acDs1ConfigTimeElapsedInterval	INTEGER
	acDs1ConfigValidIntervals	INTEGER
	acDs1ConfigTimeElapsedDay	INTEGER
	acDs1ConfigValidDays	INTEGER
	acDs1ConfigTimeElapsedFarEndInterval	INTEGER
	acDs1ConfigValidFarEndIntervals	INTEGER
	acDs1ConfigTimeElapsedFarEndDay	INTEGER
	acDs1ConfigValidFarEndDays	INTEGER
	acDs1ConfigLineType	INTEGER
	acDs1ConfigLineCoding	INTEGER
	acDs1ConfigCircuitIdentifier	DisplayString
	acDs1ConfigLoopbackConfig	INTEGER
	acDs1ConfigLineStatus	INTEGER
	acDs1ConfigSignalMode	INTEGER
	acDs1ConfigTransmitClockSource	INTEGER
	acDs1ConfigFdl	INTEGER
	acDs1ConfigInvalidIntervals	INTEGER
	acDs1ConfigInvalidDays	INTEGER
	acDs1ConfigInvalidFarEndIntervals	INTEGER
	acDs1ConfigInvalidFarEndDays	INTEGER
	acDs1ConfigLineStatusLastChange	TimeStamp
	acDs1ConfigLineStatusChangeTrapEnable	INTEGER
	acDs1ConfigLoopbackStatus	INTEGER
	acDs1ConfigInterfaceName	DisplayString
	acDs1ConfigTimeSlotIndex	INTEGER

AcDs1IntervalEntry
SEQUENCE
	acDs1IntervalNodeId	AcNodeId
	acDs1IntervalSlot	AcSlotNumber
	acDs1IntervalPort	AcPortNumber
	acDs1IntervalNumber	INTEGER
	acDs1IntervalValidStats	TruthValue
	acDs1IntervalResetStats	TruthValue
	acDs1IntervalESs	PerfIntervalCount
	acDs1IntervalSESs	PerfIntervalCount
	acDs1IntervalSEFSs	PerfIntervalCount
	acDs1IntervalUASs	PerfIntervalCount
	acDs1IntervalCSSs	PerfIntervalCount
	acDs1IntervalPCVs	PerfIntervalCount
	acDs1IntervalLESs	PerfIntervalCount
	acDs1IntervalBESs	PerfIntervalCount
	acDs1IntervalDMs	PerfIntervalCount
	acDs1IntervalLCVs	PerfIntervalCount

AcDs1DayEntry
SEQUENCE
	acDs1DayNodeId	AcNodeId
	acDs1DaySlot	AcSlotNumber
	acDs1DayPort	AcPortNumber
	acDs1DayNumber	INTEGER
	acDs1DayValidStats	TruthValue
	acDs1DayResetStats	TruthValue
	acDs1DayESs	PerfIntervalCount
	acDs1DaySESs	PerfIntervalCount
	acDs1DaySEFSs	PerfIntervalCount
	acDs1DayUASs	PerfIntervalCount
	acDs1DayCSSs	PerfIntervalCount
	acDs1DayPCVs	PerfIntervalCount
	acDs1DayLESs	PerfIntervalCount
	acDs1DayBESs	PerfIntervalCount
	acDs1DayDMs	PerfIntervalCount
	acDs1DayLCVs	PerfIntervalCount

AcDs1FarEndIntervalEntry
SEQUENCE
	acDs1FarEndIntervalNodeId	AcNodeId
	acDs1FarEndIntervalSlot	AcSlotNumber
	acDs1FarEndIntervalPort	AcPortNumber
	acDs1FarEndIntervalNumber	INTEGER
	acDs1FarEndIntervalValidStats	TruthValue
	acDs1FarEndIntervalResetStats	TruthValue
	acDs1FarEndIntervalESs	PerfIntervalCount
	acDs1FarEndIntervalSESs	PerfIntervalCount
	acDs1FarEndIntervalSEFSs	PerfIntervalCount
	acDs1FarEndIntervalUASs	PerfIntervalCount
	acDs1FarEndIntervalCSSs	PerfIntervalCount
	acDs1FarEndIntervalLESs	PerfIntervalCount
	acDs1FarEndIntervalPCVs	PerfIntervalCount
	acDs1FarEndIntervalBESs	PerfIntervalCount
	acDs1FarEndIntervalDMs	PerfIntervalCount

AcDs1FarEndDayEntry
SEQUENCE
	acDs1FarEndDayNodeId	AcNodeId
	acDs1FarEndDaySlot	AcSlotNumber
	acDs1FarEndDayPort	AcPortNumber
	acDs1FarEndDayNumber	INTEGER
	acDs1FarEndDayValidStats	TruthValue
	acDs1FarEndDayResetStats	TruthValue
	acDs1FarEndDayESs	PerfIntervalCount
	acDs1FarEndDaySESs	PerfIntervalCount
	acDs1FarEndDaySEFSs	PerfIntervalCount
	acDs1FarEndDayUASs	PerfIntervalCount
	acDs1FarEndDayCSSs	PerfIntervalCount
	acDs1FarEndDayLESs	PerfIntervalCount
	acDs1FarEndDayPCVs	PerfIntervalCount
	acDs1FarEndDayBESs	PerfIntervalCount
	acDs1FarEndDayDMs	PerfIntervalCount

AcDs1ThresholdEntry
SEQUENCE
	acDs1ThresholdNodeId	AcNodeId
	acDs1ThresholdSlot	AcSlotNumber
	acDs1ThresholdPort	AcPortNumber
	acDs1ThresholdNEIntervalESs	INTEGER
	acDs1ThresholdNEIntervalSESs	INTEGER
	acDs1ThresholdNEIntervalSEFSs	INTEGER
	acDs1ThresholdNEIntervalUASs	INTEGER
	acDs1ThresholdNEIntervalCSSs	INTEGER
	acDs1ThresholdNEIntervalPCVs	INTEGER
	acDs1ThresholdNEIntervalLESs	INTEGER
	acDs1ThresholdNEIntervalBESs	INTEGER
	acDs1ThresholdNEIntervalDMs	INTEGER
	acDs1ThresholdNEIntervalLCVs	INTEGER
	acDs1ThresholdNEDayESs	INTEGER
	acDs1ThresholdNEDaySESs	INTEGER
	acDs1ThresholdNEDaySEFSs	INTEGER
	acDs1ThresholdNEDayUASs	INTEGER
	acDs1ThresholdNEDayCSSs	INTEGER
	acDs1ThresholdNEDayPCVs	INTEGER
	acDs1ThresholdNEDayLESs	INTEGER
	acDs1ThresholdNEDayBESs	INTEGER
	acDs1ThresholdNEDayDMs	INTEGER
	acDs1ThresholdNEDayLCVs	INTEGER
	acDs1ThresholdFEIntervalESs	INTEGER
	acDs1ThresholdFEIntervalSESs	INTEGER
	acDs1ThresholdFEIntervalSEFSs	INTEGER
	acDs1ThresholdFEIntervalUASs	INTEGER
	acDs1ThresholdFEIntervalCSSs	INTEGER
	acDs1ThresholdFEIntervalLESs	INTEGER
	acDs1ThresholdFEIntervalPCVs	INTEGER
	acDs1ThresholdFEIntervalBESs	INTEGER
	acDs1ThresholdFEIntervalDMs	INTEGER
	acDs1ThresholdFEDayESs	INTEGER
	acDs1ThresholdFEDaySESs	INTEGER
	acDs1ThresholdFEDaySEFSs	INTEGER
	acDs1ThresholdFEDayUASs	INTEGER
	acDs1ThresholdFEDayCSSs	INTEGER
	acDs1ThresholdFEDayLESs	INTEGER
	acDs1ThresholdFEDayPCVs	INTEGER
	acDs1ThresholdFEDayBESs	INTEGER
	acDs1ThresholdFEDayDMs	INTEGER

Defined Values

acDs1		1.3.6.1.4.1.2785.2.3.4
The MIB module to describe the Appian DS1 interfaces objects. The tables for this DS1 are NOT SHARED between OSAPs.
MODULE-IDENTITY

acDs1ConfigTable		1.3.6.1.4.1.2785.2.3.4.1
The DS1 Configuration table. This table is created by the EMS/CLI.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs1ConfigEntry

acDs1ConfigEntry		1.3.6.1.4.1.2785.2.3.4.1.1
An entry in the DS1 Configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs1ConfigEntry

acDs1ConfigNodeId		1.3.6.1.4.1.2785.2.3.4.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acDs1ConfigSlot		1.3.6.1.4.1.2785.2.3.4.1.1.2
The physical slot number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcSlotNumber

acDs1ConfigPort		1.3.6.1.4.1.2785.2.3.4.1.1.3
The physical port number of the port
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcPortNumber

acDs1ConfigAdminStatus		1.3.6.1.4.1.2785.2.3.4.1.1.4
Appian Administrative Status attribute used to set the provisioning state as either activate(1), delete(2) or inactivate(3). Refer to the Appian-SMI.mib file for additional information.
Status: current	Access: read-create
OBJECT-TYPE
	AcAdminStatus

acDs1ConfigOpStatus		1.3.6.1.4.1.2785.2.3.4.1.1.5
The operational or actual state of this ds1.
Status: current	Access: read-only
OBJECT-TYPE
	AcOpStatus

acDs1ConfigTimeElapsedInterval		1.3.6.1.4.1.2785.2.3.4.1.1.6
The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..899

acDs1ConfigValidIntervals		1.3.6.1.4.1.2785.2.3.4.1.1.7
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acDs1ConfigTimeElapsedDay		1.3.6.1.4.1.2785.2.3.4.1.1.8
The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

acDs1ConfigValidDays		1.3.6.1.4.1.2785.2.3.4.1.1.9
The number of previous near end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr near end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acDs1ConfigTimeElapsedFarEndInterval		1.3.6.1.4.1.2785.2.3.4.1.1.10
The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..899

acDs1ConfigValidFarEndIntervals		1.3.6.1.4.1.2785.2.3.4.1.1.11
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acDs1ConfigTimeElapsedFarEndDay		1.3.6.1.4.1.2785.2.3.4.1.1.12
The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

acDs1ConfigValidFarEndDays		1.3.6.1.4.1.2785.2.3.4.1.1.13
The number of previous near end days for which data was collected. The value will be 30 unless the far/near end interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr far end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acDs1ConfigLineType		1.3.6.1.4.1.2785.2.3.4.1.1.14
This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: esf Extended SuperFrame DS1 (T1.107) d4 AT&T D4 format DS1 (T1.107)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	esf(1), d4(2)

acDs1ConfigLineCoding		1.3.6.1.4.1.2785.2.3.4.1.1.15
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	b8zs(1), ami(2)

acDs1ConfigCircuitIdentifier		1.3.6.1.4.1.2785.2.3.4.1.1.16
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..255)

acDs1ConfigLoopbackConfig		1.3.6.1.4.1.2785.2.3.4.1.1.17
This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: none Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. payload The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. facility The received signal at this interface does not go through the device (minimum penetration) but is looped back out. other Loopbacks that are not defined here. terminal The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. dual Both acDs1LineLoop and acDs1InwardLoop will be active simultaneously. NOADMINDOWN
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), payload(2), facility(3), other(4), terminal(5), dual(6)

acDs1ConfigLineStatus		1.3.6.1.4.1.2785.2.3.4.1.1.18
This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The acDs1ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. acDs1NoAlarm must be set if and only if no other flag is set. If the acDs1loopbackState bit is set, the loopback in effect can be determined from the acDs1loopbackConfig object. The various bit positions are: 1 acDs1NoAlarm No alarm present 2 acDs1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 acDs1XmtFarEndLOF Near end sending LOF Indication 8 acDs1RcvAIS Far end sending AIS 16 acDs1XmtAIS Near end sending AIS 32 acDs1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 acDs1LossOfSignal Near end Loss Of Signal 128 acDs1LoopbackState Near end is looped 512 acDs1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 acDs1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 acDs1RcvTestCode Near End detects a test code 4096 acDs1RcvFarEndRAI any line status not defined here 8192 acDs1RcvFarEndUnEqp Far End sending VT 1.5 labelled UNEQUIPPED 16384 acDs1NetEquipOOS Carrier Equipment Out of Service
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..131071

acDs1ConfigSignalMode		1.3.6.1.4.1.2785.2.3.4.1.1.19
'none' indicates that no bits are reserved for signaling on this channel. 'message' indicates that Common Chan- nel Signaling is in use on channel 24 of a DS1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), message(2), other(3)

acDs1ConfigTransmitClockSource		1.3.6.1.4.1.2785.2.3.4.1.1.20
The source of Transmit Clock. 'bits' indicates that recovered receive clock through a bits device is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	bits(1), local(2), through(3)

acDs1ConfigFdl		1.3.6.1.4.1.2785.2.3.4.1.1.21
This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties. Set any bits that are appropriate: other(1), ansi(2), att(4), none(8) 'other' indicates that a protocol other than one following is used. 'ansi' refers to the FDL exchange recommended by ANSI. 'att' refers to ESF FDL exchanges. 'none' indicates that the device does not use the FDL.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..15

acDs1ConfigInvalidIntervals		1.3.6.1.4.1.2785.2.3.4.1.1.22
The number of intervals in the range from 0 to acDs1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acDs1ConfigInvalidDays		1.3.6.1.4.1.2785.2.3.4.1.1.23
The number of days in the range from 0 to acDs1ConfigValidDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acDs1ConfigInvalidFarEndIntervals		1.3.6.1.4.1.2785.2.3.4.1.1.24
The number of intervals in the range from 0 to acDs1ConfigValidFarEndIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acDs1ConfigInvalidFarEndDays		1.3.6.1.4.1.2785.2.3.4.1.1.25
The number of days in the range from 0 to acDs1ConfigValidFarEndDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acDs1ConfigLineStatusLastChange		1.3.6.1.4.1.2785.2.3.4.1.1.26
The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

acDs1ConfigLineStatusChangeTrapEnable		1.3.6.1.4.1.2785.2.3.4.1.1.27
Indicates whether acDs1ConfigLineStatusChange traps should be generated for this interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

acDs1ConfigLoopbackStatus		1.3.6.1.4.1.2785.2.3.4.1.1.28
This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The acDs1ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 acDs1NoLoopback 2 acDs1NearEndPayloadLoopback 4 acDs1NearEndLineLoopback 8 acDs1NearEndOtherLoopback 16 acDs1NearEndInwardLoopback 32 acDs1FarEndPayloadLoopback 64 acDs1FarEndLineLoopback
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..127

acDs1ConfigInterfaceName		1.3.6.1.4.1.2785.2.3.4.1.1.29
A user configurable interface name which can be up to 64 bytes in length which uniquely identifies this DS1 interface.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

acDs1ConfigTimeSlotIndex		1.3.6.1.4.1.2785.2.3.4.1.1.30
This index corresponds to the desired timeslot row in the Shared Timeslot Table with a payload type of ds1tdm.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

acDs1IntervalTable		1.3.6.1.4.1.2785.2.3.4.2
The Appian DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acDs1IntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acDs1IntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acDs1IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs1IntervalEntry

acDs1IntervalEntry		1.3.6.1.4.1.2785.2.3.4.2.1
An entry in the Appian DS1 Interval table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs1IntervalEntry

acDs1IntervalNodeId		1.3.6.1.4.1.2785.2.3.4.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acDs1IntervalSlot		1.3.6.1.4.1.2785.2.3.4.2.1.2
The physical slot number for this port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcSlotNumber

acDs1IntervalPort		1.3.6.1.4.1.2785.2.3.4.2.1.3
The physical port number for this port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcPortNumber

acDs1IntervalNumber		1.3.6.1.4.1.2785.2.3.4.2.1.4
A number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total (sum) of all of the previous completed intervals (2..97).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..98

acDs1IntervalValidStats		1.3.6.1.4.1.2785.2.3.4.2.1.5
This variable indicates if the data for this interval is valid. For acDs1IntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acDs1IntervalResetStats		1.3.6.1.4.1.2785.2.3.4.2.1.6
This variable allows the data for the current interval (acDs1IntervalNumber = 1) to be reset. The acDs1IntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1IntervalNumber 2..98. This field will always show a value of False when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acDs1IntervalESs		1.3.6.1.4.1.2785.2.3.4.2.1.7
The number of Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalSESs		1.3.6.1.4.1.2785.2.3.4.2.1.8
The number of Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalSEFSs		1.3.6.1.4.1.2785.2.3.4.2.1.9
The number of Severely Errored Framing Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalUASs		1.3.6.1.4.1.2785.2.3.4.2.1.10
The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalCSSs		1.3.6.1.4.1.2785.2.3.4.2.1.11
The number of Controlled Slip Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalPCVs		1.3.6.1.4.1.2785.2.3.4.2.1.12
The number of Path Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalLESs		1.3.6.1.4.1.2785.2.3.4.2.1.13
The number of Line Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalBESs		1.3.6.1.4.1.2785.2.3.4.2.1.14
The number of Bursty Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalDMs		1.3.6.1.4.1.2785.2.3.4.2.1.15
The number of Degraded Minutes.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1IntervalLCVs		1.3.6.1.4.1.2785.2.3.4.2.1.16
The number of Line Code Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayTable		1.3.6.1.4.1.2785.2.3.4.3
The Appian DS1 Day Table contains various statistics collected by each DS1 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acDs1DayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acDs1DayNumber=2..31) represents one of the past 24 hr periods (day). This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs1DayEntry

acDs1DayEntry		1.3.6.1.4.1.2785.2.3.4.3.1
An entry in the Appian DS1 Day table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs1DayEntry

acDs1DayNodeId		1.3.6.1.4.1.2785.2.3.4.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acDs1DaySlot		1.3.6.1.4.1.2785.2.3.4.3.1.2
The physical slot number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcSlotNumber

acDs1DayPort		1.3.6.1.4.1.2785.2.3.4.3.1.3
The physical port number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcPortNumber

acDs1DayNumber		1.3.6.1.4.1.2785.2.3.4.3.1.4
A number between 1 and 31, where 1 is the current 24 hour interval in progress (day), 2 is the most recently completed 24 hour interval and 31 is the 24 hour interval completed 29 days prior to interval 1.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..31

acDs1DayValidStats		1.3.6.1.4.1.2785.2.3.4.3.1.5
This variable indicates if the data for this interval is valid.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acDs1DayResetStats		1.3.6.1.4.1.2785.2.3.4.3.1.6
This variable allows the data for the current day (acDs1DayIndex = 1) to be reset. The acDs1DayValidFlag will be set to False after the reset for the current day. This field has no effect on acDs1DayIndex 2..31. This field will always show a value of False when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acDs1DayESs		1.3.6.1.4.1.2785.2.3.4.3.1.7
The number of Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DaySESs		1.3.6.1.4.1.2785.2.3.4.3.1.8
The number of Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DaySEFSs		1.3.6.1.4.1.2785.2.3.4.3.1.9
The number of Severely Errored Framing Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayUASs		1.3.6.1.4.1.2785.2.3.4.3.1.10
The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayCSSs		1.3.6.1.4.1.2785.2.3.4.3.1.11
The number of Controlled Slip Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayPCVs		1.3.6.1.4.1.2785.2.3.4.3.1.12
The number of Path Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayLESs		1.3.6.1.4.1.2785.2.3.4.3.1.13
The number of Line Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayBESs		1.3.6.1.4.1.2785.2.3.4.3.1.14
The number of Bursty Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayDMs		1.3.6.1.4.1.2785.2.3.4.3.1.15
The number of Degraded Minutes.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1DayLCVs		1.3.6.1.4.1.2785.2.3.4.3.1.16
The number of Line Code Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalTable		1.3.6.1.4.1.2785.2.3.4.4
The DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by acDs1FarEndIntervalNumber) for one specific instance (identified by acDs1FarEndIntervalSlot, acDs1FarEndIntervalPort). This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs1FarEndIntervalEntry

acDs1FarEndIntervalEntry		1.3.6.1.4.1.2785.2.3.4.4.1
An entry in the DS1 Far End Interval table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs1FarEndIntervalEntry

acDs1FarEndIntervalNodeId		1.3.6.1.4.1.2785.2.3.4.4.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acDs1FarEndIntervalSlot		1.3.6.1.4.1.2785.2.3.4.4.1.2
The physical slot number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcSlotNumber

acDs1FarEndIntervalPort		1.3.6.1.4.1.2785.2.3.4.4.1.3
The physical port number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcPortNumber

acDs1FarEndIntervalNumber		1.3.6.1.4.1.2785.2.3.4.4.1.4
A number between 1 and 98, where 1 is current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of intervals 2..97 (sum).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..98

acDs1FarEndIntervalValidStats		1.3.6.1.4.1.2785.2.3.4.4.1.5
This variable indicates if the data for this interval is valid. For acDs1FarEndIntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acDs1FarEndIntervalResetStats		1.3.6.1.4.1.2785.2.3.4.4.1.6
This variable allows the data for the current interval (acDs1FarEndIntervalNumber = 1) to be reset. The acDs1FarEndIntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1FarEndIntervalNumber 2..98. This field will always show a value of false when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acDs1FarEndIntervalESs		1.3.6.1.4.1.2785.2.3.4.4.1.7
The number of Far End Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalSESs		1.3.6.1.4.1.2785.2.3.4.4.1.8
The number of Far End Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalSEFSs		1.3.6.1.4.1.2785.2.3.4.4.1.9
The number of Far End Severely Errored Framing Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalUASs		1.3.6.1.4.1.2785.2.3.4.4.1.10
The number of Unavailable Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalCSSs		1.3.6.1.4.1.2785.2.3.4.4.1.11
The number of Far End Controlled Slip Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalLESs		1.3.6.1.4.1.2785.2.3.4.4.1.12
The number of Far End Line Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalPCVs		1.3.6.1.4.1.2785.2.3.4.4.1.13
The number of Far End Path Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalBESs		1.3.6.1.4.1.2785.2.3.4.4.1.14
The number of Far End Bursty Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndIntervalDMs		1.3.6.1.4.1.2785.2.3.4.4.1.15
The number of Far End Degraded Minutes.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDayTable		1.3.6.1.4.1.2785.2.3.4.5
The DS1 Far End Day Table contains various statistics collected by each DS1 interface over the previous 30 days of operation. Each row in this table represents a one day interval (identified by acDs1FarEndDayNumber). This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs1FarEndDayEntry

acDs1FarEndDayEntry		1.3.6.1.4.1.2785.2.3.4.5.1
An entry in the DS1 Far End Day table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs1FarEndDayEntry

acDs1FarEndDayNodeId		1.3.6.1.4.1.2785.2.3.4.5.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acDs1FarEndDaySlot		1.3.6.1.4.1.2785.2.3.4.5.1.2
The physical slot number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcSlotNumber

acDs1FarEndDayPort		1.3.6.1.4.1.2785.2.3.4.5.1.3
The physical port number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcPortNumber

acDs1FarEndDayNumber		1.3.6.1.4.1.2785.2.3.4.5.1.4
A number between 1 and 31, where 1 is current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..31

acDs1FarEndDayValidStats		1.3.6.1.4.1.2785.2.3.4.5.1.5
This variable indicates if the data for this interval is valid.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acDs1FarEndDayResetStats		1.3.6.1.4.1.2785.2.3.4.5.1.6
This variable allows the data for the current day (acDs1FarEndDayIndex = 1) to be reset. The acDs1FarEndDayValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1FarEndDayIndex 2..31. This field will always show a value of false when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acDs1FarEndDayESs		1.3.6.1.4.1.2785.2.3.4.5.1.7
The number of Far End Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDaySESs		1.3.6.1.4.1.2785.2.3.4.5.1.8
The number of Far End Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDaySEFSs		1.3.6.1.4.1.2785.2.3.4.5.1.9
The number of Far End Severely Errored Framing Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDayUASs		1.3.6.1.4.1.2785.2.3.4.5.1.10
The number of Unavailable Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDayCSSs		1.3.6.1.4.1.2785.2.3.4.5.1.11
The number of Far End Controlled Slip Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDayLESs		1.3.6.1.4.1.2785.2.3.4.5.1.12
The number of Far End Line Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDayPCVs		1.3.6.1.4.1.2785.2.3.4.5.1.13
The number of Far End Path Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDayBESs		1.3.6.1.4.1.2785.2.3.4.5.1.14
The number of Far End Bursty Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1FarEndDayDMs		1.3.6.1.4.1.2785.2.3.4.5.1.15
The number of Far End Degraded Minutes.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acDs1ThresholdTable		1.3.6.1.4.1.2785.2.3.4.6
The Appian DS1 Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs1ThresholdEntry

acDs1ThresholdEntry		1.3.6.1.4.1.2785.2.3.4.6.1
An entry in the Appian DS1 Threshold table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs1ThresholdEntry

acDs1ThresholdNodeId		1.3.6.1.4.1.2785.2.3.4.6.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acDs1ThresholdSlot		1.3.6.1.4.1.2785.2.3.4.6.1.2
The physical slot number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcSlotNumber

acDs1ThresholdPort		1.3.6.1.4.1.2785.2.3.4.6.1.3
The physical port number of the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcPortNumber

acDs1ThresholdNEIntervalESs		1.3.6.1.4.1.2785.2.3.4.6.1.4
The threshold value for interval number of Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalSESs		1.3.6.1.4.1.2785.2.3.4.6.1.5
The threshold value for the interval number of Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalSEFSs		1.3.6.1.4.1.2785.2.3.4.6.1.6
The threshold for the interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalUASs		1.3.6.1.4.1.2785.2.3.4.6.1.7
The threshold for the interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalCSSs		1.3.6.1.4.1.2785.2.3.4.6.1.8
The threshold for the interval number of Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalPCVs		1.3.6.1.4.1.2785.2.3.4.6.1.9
The threshold for the interval number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalLESs		1.3.6.1.4.1.2785.2.3.4.6.1.10
The threshold value for the interval number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalBESs		1.3.6.1.4.1.2785.2.3.4.6.1.11
The threshold for the interval number of Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalDMs		1.3.6.1.4.1.2785.2.3.4.6.1.12
The threshold for the interval number of Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEIntervalLCVs		1.3.6.1.4.1.2785.2.3.4.6.1.13
The threshold for the interval number of Line Code Violations. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayESs		1.3.6.1.4.1.2785.2.3.4.6.1.14
The threshold value for day number of Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDaySESs		1.3.6.1.4.1.2785.2.3.4.6.1.15
The threshold for the day number of Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDaySEFSs		1.3.6.1.4.1.2785.2.3.4.6.1.16
The threshold value for the day number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayUASs		1.3.6.1.4.1.2785.2.3.4.6.1.17
The threshold value for the day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayCSSs		1.3.6.1.4.1.2785.2.3.4.6.1.18
The threshold for the day number of Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayPCVs		1.3.6.1.4.1.2785.2.3.4.6.1.19
The threshold value for the day number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayLESs		1.3.6.1.4.1.2785.2.3.4.6.1.20
The threshold for the day number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayBESs		1.3.6.1.4.1.2785.2.3.4.6.1.21
The threshold for the day number of Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayDMs		1.3.6.1.4.1.2785.2.3.4.6.1.22
The threshold for the day number of Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdNEDayLCVs		1.3.6.1.4.1.2785.2.3.4.6.1.23
The threshold for the day number of Line Code Violations. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalESs		1.3.6.1.4.1.2785.2.3.4.6.1.24
The threshold for the far end interval number of Far End Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalSESs		1.3.6.1.4.1.2785.2.3.4.6.1.25
The threshold for the far end interval number of Far End Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalSEFSs		1.3.6.1.4.1.2785.2.3.4.6.1.26
The threshold for the far end interval number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalUASs		1.3.6.1.4.1.2785.2.3.4.6.1.27
The threshold value for the far end interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalCSSs		1.3.6.1.4.1.2785.2.3.4.6.1.28
The threshold value for the far end interval number of Far End Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalLESs		1.3.6.1.4.1.2785.2.3.4.6.1.29
The threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalPCVs		1.3.6.1.4.1.2785.2.3.4.6.1.30
The threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalBESs		1.3.6.1.4.1.2785.2.3.4.6.1.31
The threshold for the far end interval number of Far End Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEIntervalDMs		1.3.6.1.4.1.2785.2.3.4.6.1.32
The threshold for the far end interval number of Far End Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDayESs		1.3.6.1.4.1.2785.2.3.4.6.1.33
The threshold for the far end day number of Far End Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDaySESs		1.3.6.1.4.1.2785.2.3.4.6.1.34
The threshold for the far end day number of Far End Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDaySEFSs		1.3.6.1.4.1.2785.2.3.4.6.1.35
The threshold for the far end day number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDayUASs		1.3.6.1.4.1.2785.2.3.4.6.1.36
The threshold value for the far end day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDayCSSs		1.3.6.1.4.1.2785.2.3.4.6.1.37
The threshold value for the far end day number of Far End Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDayLESs		1.3.6.1.4.1.2785.2.3.4.6.1.38
The threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDayPCVs		1.3.6.1.4.1.2785.2.3.4.6.1.39
The threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDayBESs		1.3.6.1.4.1.2785.2.3.4.6.1.40
The threshold for the far end day number of Far End Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1ThresholdFEDayDMs		1.3.6.1.4.1.2785.2.3.4.6.1.41
The threshold for the far end day number of Far End Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acDs1Traps		1.3.6.1.4.1.2785.2.3.4.0
OBJECT IDENTIFIER

acDs1LineStatusChangeTrap		1.3.6.1.4.1.2785.2.3.4.0.1
An acLogcialDs1LineStatusChange trap is sent when the value of an instance acDs1ConfigLineStatus changes. It can be utilized by an NMS to trigger polls.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1StatsResetTrap		1.3.6.1.4.1.2785.2.3.4.0.2
The Ds1 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1CfgErrorTrap		1.3.6.1.4.1.2785.2.3.4.0.3
A configuration request to the Ds1 configuration table for an interface has been detected as invalid or corrupt.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1LinkDownTrap		1.3.6.1.4.1.2785.2.3.4.0.4
The link for this physical ds1 interface has obtained sync.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1LinkUpTrap		1.3.6.1.4.1.2785.2.3.4.0.5
The link for this physical ds1 interface has been lost.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalESsTrap		1.3.6.1.4.1.2785.2.3.4.0.7
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalSESsTrap		1.3.6.1.4.1.2785.2.3.4.0.8
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalSEFSsTrap		1.3.6.1.4.1.2785.2.3.4.0.9
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalUASsTrap		1.3.6.1.4.1.2785.2.3.4.0.10
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalCSSsTrap		1.3.6.1.4.1.2785.2.3.4.0.11
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalPCVsTrap		1.3.6.1.4.1.2785.2.3.4.0.12
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalLESsTrap		1.3.6.1.4.1.2785.2.3.4.0.13
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalBESsTrap		1.3.6.1.4.1.2785.2.3.4.0.14
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalDMsTrap		1.3.6.1.4.1.2785.2.3.4.0.15
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEIntervalLCVsTrap		1.3.6.1.4.1.2785.2.3.4.0.16
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayESsTrap		1.3.6.1.4.1.2785.2.3.4.0.17
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDaySESsTrap		1.3.6.1.4.1.2785.2.3.4.0.18
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDaySEFSTrap		1.3.6.1.4.1.2785.2.3.4.0.19
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayUASsTrap		1.3.6.1.4.1.2785.2.3.4.0.20
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayCSSsTrap		1.3.6.1.4.1.2785.2.3.4.0.21
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayPCVsTrap		1.3.6.1.4.1.2785.2.3.4.0.22
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayLESsTrap		1.3.6.1.4.1.2785.2.3.4.0.23
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayBESsTrap		1.3.6.1.4.1.2785.2.3.4.0.24
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayDMsTrap		1.3.6.1.4.1.2785.2.3.4.0.25
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdNEDayLCVsTrap		1.3.6.1.4.1.2785.2.3.4.0.26
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalESsTrap		1.3.6.1.4.1.2785.2.3.4.0.27
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalSESsTrap		1.3.6.1.4.1.2785.2.3.4.0.28
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalSEFSsTrap		1.3.6.1.4.1.2785.2.3.4.0.29
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalUASsTrap		1.3.6.1.4.1.2785.2.3.4.0.30
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalCSSsTrap		1.3.6.1.4.1.2785.2.3.4.0.31
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalLESsTrap		1.3.6.1.4.1.2785.2.3.4.0.32
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalPCVsTrap		1.3.6.1.4.1.2785.2.3.4.0.33
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalBESsTrap		1.3.6.1.4.1.2785.2.3.4.0.34
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEIntervalDMsTrap		1.3.6.1.4.1.2785.2.3.4.0.35
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDayESsTrap		1.3.6.1.4.1.2785.2.3.4.0.36
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDaySESsTrap		1.3.6.1.4.1.2785.2.3.4.0.37
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDaySEFSsTrap		1.3.6.1.4.1.2785.2.3.4.0.38
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDayUASsTrap		1.3.6.1.4.1.2785.2.3.4.0.39
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDayCSSsTrap		1.3.6.1.4.1.2785.2.3.4.0.40
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDayLESsTrap		1.3.6.1.4.1.2785.2.3.4.0.41
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDayPCVsTrap		1.3.6.1.4.1.2785.2.3.4.0.42
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDayBESsTrap		1.3.6.1.4.1.2785.2.3.4.0.43
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acDs1ExceededThresholdFEDayDMsTrap		1.3.6.1.4.1.2785.2.3.4.0.44
The threshold value speficed has been exceeded for this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE