APERTUS-UA-RESPONSE-TIME-MIB

File: APERTUS-UA-RESPONSE-TIME-MIB.mib (7795 bytes)

Imported modules

RFC1213-MIB SNMPv2-SMI SNMPv2-TC
SNMPv2-CONF

Imported symbols

mib-2 MODULE-IDENTITY OBJECT-TYPE
OBJECT-IDENTITY TimeTicks IpAddress
Counter32 Gauge32 TEXTUAL-CONVENTION
RowStatus DisplayString TruthValue
MODULE-COMPLIANCE OBJECT-GROUP

Defined Types

AperResponseTimeDomainEntry  
SEQUENCE    
  aperResponseTimeDomainName DisplayString
  aperResponseTimeDomainUpServers INTEGER
  aperResponseTimeDomainDownServers INTEGER
  aperResponseTimeDomainCompareMethod INTEGER

AperResponseTimeNodeEntry  
SEQUENCE    
  aperResponseTimeNodeName DisplayString
  aperResponseTimeNodeIP IpAddress
  aperResponseTimeNodeWindow INTEGER
  aperResponseTimeNodePoolIndex INTEGER
  aperResponseTimeNodeStatus INTEGER
  aperResponseTimeNodeResponseTime TimeTicks
  aperResponseTimeNodeAdjustedCompareValue TimeTicks

Defined Values

internet 1.3.6.1
OBJECT IDENTIFIER    

directory 1.3.6.1.1
OBJECT IDENTIFIER    

mgmt 1.3.6.1.2
OBJECT IDENTIFIER    

experimental 1.3.6.1.3
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

apertus 1.3.6.1.4.1.543
OBJECT IDENTIFIER    

isg 1.3.6.1.4.1.543.3
OBJECT IDENTIFIER    

aperua 1.3.6.1.4.1.543.3.3
OBJECT IDENTIFIER    

aperresponsetime 1.3.6.1.4.1.543.3.3.5
OBJECT IDENTIFIER    

aperResponseTimeMIB 1.3.6.1.4.1.543.3.3.5.1
OBJECT IDENTIFIER    

aperResponseTimeMIBObjects 1.3.6.1.4.1.543.3.3.5.1.1
OBJECT IDENTIFIER    

aperResponseTimeConfig 1.3.6.1.4.1.543.3.3.5.1.1.1
OBJECT IDENTIFIER    

aperResponseTimeDomain 1.3.6.1.4.1.543.3.3.5.1.1.2
OBJECT IDENTIFIER    

aperResponseTimeNode 1.3.6.1.4.1.543.3.3.5.1.1.3
OBJECT IDENTIFIER    

aperResponseTimeConfigStatus 1.3.6.1.4.1.543.3.3.5.1.1.1.1
Status of Universal Access server
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), loading(2), down(3)  

aperResponseTimeConfigUpTime 1.3.6.1.4.1.543.3.3.5.1.1.1.2
This value represents the time elapsed since the server was started in 1/100nths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

aperResponseTimeDomainTable 1.3.6.1.4.1.543.3.3.5.1.1.2.1
Domain information broken down domain name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AperResponseTimeDomainEntry

aperResponseTimeDomainEntry 1.3.6.1.4.1.543.3.3.5.1.1.2.1.1
This table contains information on each of the load balance domains under its control.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AperResponseTimeDomainEntry  

aperResponseTimeDomainName 1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.1
The zone name for this load-balance domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aperResponseTimeDomainUpServers 1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.2
The number of servers that are up at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

aperResponseTimeDomainDownServers 1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.3
The number of servers in list that are marked as down at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

aperResponseTimeDomainCompareMethod 1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.4
How the ...NodeWindow field is interpreted. If the compare method is absolute, the values are compared by absolute adjustments to the response time. (EG, a 10ms response time with a window of 40 in a absolute domain will have an effective compare time of 50ms). A percentage domain indicates that the values are offset by the given percentage. (EG, a 20ms responsetime with a window of 400 will have am effective compare time of 80ms). Note that to leave a value unadjusted, the window needs to be 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absolute(1), percentage(2)  

aperResponseTimeNodeTable 1.3.6.1.4.1.543.3.3.5.1.1.3.1
Node information broken down domain name and IP address
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AperResponseTimeNodeEntry

aperResponseTimeNodeEntry 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1
This table contains information on each of the machines in the different laod balance zones.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AperResponseTimeNodeEntry  

aperResponseTimeNodeName 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.1
The zone name for this Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

aperResponseTimeNodeIP 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.2
The IP address of the NODE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

aperResponseTimeNodeWindow 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.3
The window offset for this node vs other nodes within the same pool level. Please see the description for the domain field ...CompareMethod for more information on this fields usage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

aperResponseTimeNodePoolIndex 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.4
This value is the pool index. When all nodes with a lower index are down, the items with next highest pool index are considered for responseTime usage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

aperResponseTimeNodeStatus 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.5
Indicates the status of the node. Up(1) shows that the node is up and is being considered for use. Down(2) indicates that the last query to the NODE image resulted in a down marker for the node. Admindown(3) indicates that an administrator took the node offline manually (from the UA server end). Notqueried(4) is used to indicate that a node has never been queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), notqueried(3)  

aperResponseTimeNodeResponseTime 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.6
Response time in MS of last node access. A value of 0 is returned if NodeStatus is not ready(1) or if the node has never been queried
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

aperResponseTimeNodeAdjustedCompareValue 1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.7
Response time as adjusted by the window value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor