APCUPS-MIB
File:
APCUPS-MIB.mib (35391 bytes)
Imported modules
Imported symbols
Defined Types
Defined Values
apc |
1.3.6.1.4.1.318 |
OBJECT IDENTIFIER |
|
|
|
products |
1.3.6.1.4.1.318.1 |
OBJECT IDENTIFIER |
|
|
|
software |
1.3.6.1.4.1.318.1.2 |
OBJECT IDENTIFIER |
|
|
|
dmtfGroups |
1.3.6.1.4.1.318.1.2.2.1 |
OBJECT IDENTIFIER |
|
|
|
tComponentid |
1.3.6.1.4.1.318.1.2.2.1.1 |
This group defines the attributes common to all components.
This groupis required. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SComponentid |
|
a1Product |
1.3.6.1.4.1.318.1.2.2.1.1.1.2 |
Product name for this system. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiDisplaystring |
|
|
a1Version |
1.3.6.1.4.1.318.1.2.2.1.1.1.3 |
Version number of this system. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiDisplaystring |
|
|
a1Installation |
1.3.6.1.4.1.318.1.2.2.1.1.1.5 |
The time and date when this component was installed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiDateX |
|
|
a1Verify |
1.3.6.1.4.1.318.1.2.2.1.1.1.6 |
A code that provides a level of verification that the component
is stillinstalled and working. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vAnErrorOccuredCheckStatusCode(0), vThisComponentDoesNotExist(1), vVerificationIsNotSupported(2), vReserved(3), vThisComponentExistsButTheFunctionalityI(4), vThisComponentExistsButTheFunctionality1(5), vThisComponentExistsAndIsNotFunctioningC(6), vThisComponentExistsAndIsFunctioningCorr(7) |
|
tUpsBattery |
1.3.6.1.4.1.318.1.2.2.1.2 |
The UPS Battery group contains information regarding the
UPSsystem's battery status. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SUpsBattery |
|
eUpsBattery |
1.3.6.1.4.1.318.1.2.2.1.2.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SUpsBattery |
|
|
a2BatteryStatus |
1.3.6.1.4.1.318.1.2.2.1.2.1.1 |
The indication of the capacity remaining in the UPS system's
batteries. Avalue of 'battery normal' indicates that the remaining estimated
minutes of run-time isgreater than the UPS's configured 'low battery time'
(typically two minutes). A valueof 'battery low' indicates that the remaining
estimated minutes of battery run-time isless than or equal to the UPS's configur
d 'low battery time'. A value of 'batterydepleted' indicates that the UPS
will be unable to sustain the present load when and ifthe uti |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vUnknown(1), vBatteryNormal(2), vBatteryLow(3), vBatteryDepleted(4) |
|
a2SecondsOnBattery |
1.3.6.1.4.1.318.1.2.2.1.2.1.2 |
If the UPS is on battery power, the elapsed time in seconds
since theUPS last switched to battery power, or the time since the UPS component
software waslast restarted, whichever is less. Zero shall be returned if
the UPS is not on batterypower. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter |
|
|
a2EstimatedMinutesRemaining |
1.3.6.1.4.1.318.1.2.2.1.2.1.3 |
An estimate in minutes of the time to battery charge depletion
under thepresent load conditions if the utility power is off and remains
off, or if it were to be lostand remain off. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a2EstimatedChargeRemaining |
1.3.6.1.4.1.318.1.2.2.1.2.1.4 |
An estimate of the time to battery charge depletion under
the present load conditions if theutility power is off and remains off, or
if it were to be lost and remain off. The valuerepresents a percent of full
charge. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiGauge |
|
|
a2BatteryVoltage |
1.3.6.1.4.1.318.1.2.2.1.2.1.5 |
The magnitude of the present battery voltage in 0.1 volts
DC. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiGauge |
|
|
a2BatteryCurrent |
1.3.6.1.4.1.318.1.2.2.1.2.1.6 |
The present battery current in 0.1 Amps DC. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiGauge |
|
|
a2TemperatureProbeIndex |
1.3.6.1.4.1.318.1.2.2.1.2.1.7 |
Index into the Temperature Probe table. This probe indicates
the ambienttemperature at or near the UPS battery casing. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a2FruGroupIndex |
1.3.6.1.4.1.318.1.2.2.1.2.1.8 |
If this is a Field Replaceable Unit or it is part of another
FRU, this providesan index into the FRU table; 'value = -1' indicates that
the group is not a FRU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a2OperationalGroupIndex |
1.3.6.1.4.1.318.1.2.2.1.2.1.9 |
The index into the Operational State table for this device. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
tTemperatureProbe |
1.3.6.1.4.1.318.1.2.2.1.3 |
This group defines the attributes for the temperature probes
in thissystem. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
STemperatureProbe |
|
a3TemperatureProbeLocation |
1.3.6.1.4.1.318.1.2.2.1.3.1.2 |
Identifies the physical location of the temperature probe. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vProcessor(3), vDisk(4), vPeripheralBay(5), vSmbMaster(6), vMotherboard(7), vMemoryModule(8), vProcessorModule(9), vPowerUnit(10), vAdd-inCard(11) |
|
a3TemperatureStatus |
1.3.6.1.4.1.318.1.2.2.1.3.1.4 |
Defines the status of the temperature monitored by this temperat
reprobe. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6) |
|
a3TemperatureProbeTemperatureReading |
1.3.6.1.4.1.318.1.2.2.1.3.1.5 |
The present temperature reading of this temperature probe
in 1/10th degrees C. 0x8000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3MonitoredTemperatureNominalReading |
1.3.6.1.4.1.318.1.2.2.1.3.1.6 |
The nominal temperature reading of the temperature monitored
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3MonitoredTemperatureNormalMaximum |
1.3.6.1.4.1.318.1.2.2.1.3.1.7 |
The normal maximum temperature reading of the temperature
monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'
or 'unsupported'. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3MonitoredTemperatureNormalMinimum |
1.3.6.1.4.1.318.1.2.2.1.3.1.8 |
The normal minimum temperature reading of the temperature
monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'
or 'unsupported'. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureProbeMaximum |
1.3.6.1.4.1.318.1.2.2.1.3.1.9 |
The maximum temperature reading specified to be readable
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureProbeMinimum |
1.3.6.1.4.1.318.1.2.2.1.3.1.10 |
The minimum temperature reading specified to be readable
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureReadingLowerThreshold-Non-c |
1.3.6.1.4.1.318.1.2.2.1.3.1.11 |
The lower non-critical threshold for the temperature reading
set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupport
d'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureReadingUpperThreshold-Non-c |
1.3.6.1.4.1.318.1.2.2.1.3.1.12 |
The upper non-critical threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureReadingLowerThreshold-Criti |
1.3.6.1.4.1.318.1.2.2.1.3.1.13 |
The lower critical threshold for the temperature probe, in
1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureReadingUpperThreshold-Criti |
1.3.6.1.4.1.318.1.2.2.1.3.1.14 |
The upper critical threshold for the temperature probe, in
/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureReadingLowerThreshold-Non-r |
1.3.6.1.4.1.318.1.2.2.1.3.1.15 |
The lower non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureReadingUpperThreshold-Non-r |
1.3.6.1.4.1.318.1.2.2.1.3.1.16 |
The upper non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureProbeResolution |
1.3.6.1.4.1.318.1.2.2.1.3.1.17 |
The resolution for the reading from this temperature probe,
in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureProbeTolerance |
1.3.6.1.4.1.318.1.2.2.1.3.1.18 |
The tolerance for the reading from this temperature probe,
in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3TemperatureProbeAccuracy |
1.3.6.1.4.1.318.1.2.2.1.3.1.19 |
The accuracy for the reading from this temperature probe,
in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or 'unsuppor
ed'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a3FruGroupIndex |
1.3.6.1.4.1.318.1.2.2.1.3.1.20 |
Index into the FRU table. A value of -1 indicates that this
device is not an FRU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
tOperationalStateTable |
1.3.6.1.4.1.318.1.2.2.1.4 |
This group provides the operational state, usage, and availabili
y status,and administrative state indicators for specific Device Group instances
|
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SOperationalStateTable |
|
a4DeviceGroupIndex |
1.3.6.1.4.1.318.1.2.2.1.4.1.2 |
The group ID of the group referencing this instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a4OperationalStatus |
1.3.6.1.4.1.318.1.2.2.1.4.1.3 |
The operational status of the Device Group instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vEnabled(3), vDisabled(4), vNotApplicable(5) |
|
a4UsageState |
1.3.6.1.4.1.318.1.2.2.1.4.1.4 |
The usage state of the Device Group instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vIdle(3), vActive(4), vBusy(5), vNotApplicable(6) |
|
a4AvailabilityStatus |
1.3.6.1.4.1.318.1.2.2.1.4.1.5 |
The availability status of the Device Group instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vRunning(3), vWarning(4), vInTest(5), vNotApplicable(6), vPowerOff(7), vOffLine(8), vOffDuty(9), vDegraded(10), vNotInstalled(11), vInstallError(12), vPowerSave(13) |
|
a4AdministrativeState |
1.3.6.1.4.1.318.1.2.2.1.4.1.6 |
The administrative state of the Device Group instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vLocked(3), vUnlocked(4), vNotApplicable(5), vShuttingDown(6) |
|
a4FatalErrorCount |
1.3.6.1.4.1.318.1.2.2.1.4.1.7 |
The accumulated Fatal or Non-recoverable error count for
this DeviceGroup instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter |
|
|
a4MajorErrorCount |
1.3.6.1.4.1.318.1.2.2.1.4.1.8 |
The accumulated Major or Critical error count for this Device
Groupinstance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter |
|
|
a4WarningErrorCount |
1.3.6.1.4.1.318.1.2.2.1.4.1.9 |
The accumulated Warning or Non-Critical error count for this
DeviceGroup instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter |
|
|
a4CurrentErrorStatus |
1.3.6.1.4.1.318.1.2.2.1.4.1.10 |
This attribute presents the current error status for this
Device Groupinstance. The most critical error status in effect should be
presented. I.e. if a part of theDevice Group instance is 'Critical', while
other status is 'Non-critical' then the status'Critical' should be reported. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vOk(3), vNon-critical(4), vCritical(5), vNon-recoverable(6) |
|
tDiagnostics |
1.3.6.1.4.1.318.1.2.2.1.5 |
This group defines the diagnostic functions that are provided
by thiscomponent for analyzing potential failures within the component. A
diagnosticfunction could be an actual test run against the component, the
results of a self-test ofthe component, an analysis of failure information
captured during a failure of thecomponent, or an analysis of the current
state of the component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SDiagnostics |
|
a5DiagnosticFunctionName |
1.3.6.1.4.1.318.1.2.2.1.5.1.2 |
A specific descriptive name of the diagnostic function, includin
versioninformation, if relevant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiDisplaystring |
|
|
a5ExclusiveAccessRequired |
1.3.6.1.4.1.318.1.2.2.1.5.1.4 |
Indicates whether this diagnostic function requires exclusive
access tothe device or component, implying that the user or management applicati
n must takesome action within the operating system to ensure that the device
or component cannotbe used by any other function. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vFalse(0), vTrue(1) |
|
a5PrerequisiteConditions |
1.3.6.1.4.1.318.1.2.2.1.5.1.5 |
Indicates what conditions must be met before this diagnostic
functioncan be run. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOther(1), vUnknown(2), vNoPrerequisites(3), vWrapPlugInstalled(4), vNoMediaInstalled(5), vScratchMediaInstalled(6), vTestMediaInstalled(7), vSystemReferenceDisketteInstalled(8) |
|
a5PrerequisiteDiagnosticFunction |
1.3.6.1.4.1.318.1.2.2.1.5.1.6 |
If non-0, this specifies the ID of another diagnostic function
that must berun immediately prior to this one. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
tDiagnosticRequestGroup |
1.3.6.1.4.1.318.1.2.2.1.6 |
This group defines the attributes which a management application
usesto request an actual diagnostic analysis. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SDiagnosticRequestGroup |
|
a6DiagnosticFunctionReserveKey |
1.3.6.1.4.1.318.1.2.2.1.6.1.1 |
Indicates whether the interface to this component's diagnostic
functionsis reserved. A zero value returned on a get indicates that a reserve
is already in effect. A non-zero value indicates that no reserve was in effect,
and the returned value may beused as a reserve key. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a6DiagnosticFunctionRequest |
1.3.6.1.4.1.318.1.2.2.1.6.1.2 |
The ID of the specific diagnostic function which is being
requested. Ifthe interface is reserved, a set request to this attribute should
also set the DiagnosticFunction Reserve Key with the reserve key value. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a6DiagnosticFunctionResult |
1.3.6.1.4.1.318.1.2.2.1.6.1.3 |
The integer-based result code of the last diagnostic function
run. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
tDiagnosticResults |
1.3.6.1.4.1.318.1.2.2.1.7 |
This group defines the attributes for interpreting diagnostic
functionresult codes. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SDiagnosticResults |
|
a7DiagnosticFunctionId |
1.3.6.1.4.1.318.1.2.2.1.7.1.1 |
The unique ID for a specific diagnostic function. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a7FaultIsolatedToThisComponent |
1.3.6.1.4.1.318.1.2.2.1.7.1.4 |
An indicator of whether the fault is strictly isolated within
the bounds ofthis component. A False value indicates that the fault might
be caused by a failingparent component; for example, a disk test may fail
because of a faulty disk controller. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vFalse(0), vTrue(1) |
|
tErrorControlGroup |
1.3.6.1.4.1.318.1.2.2.1.8 |
Indication control and status for the parent group. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SErrorControlGroup |
|
a8Selfid |
1.3.6.1.4.1.318.1.2.2.1.8.1.1 |
Instance id. A unique number that identifies this row. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a8NumberOfFatalErrors |
1.3.6.1.4.1.318.1.2.2.1.8.1.2 |
Count of all fatal errors since system startup. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter |
|
|
a8NumberOfMajorErrors |
1.3.6.1.4.1.318.1.2.2.1.8.1.3 |
Count of all major errors since system startup. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter |
|
|
a8NumberOfWarnings |
1.3.6.1.4.1.318.1.2.2.1.8.1.4 |
Count of all warning errors since system startup. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter |
|
|
a8ErrorStatus |
1.3.6.1.4.1.318.1.2.2.1.8.1.5 |
current error status |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOk(0), vWarning(1), vMajor(2), vFatal(3) |
|
a8ErrorStatusType |
1.3.6.1.4.1.318.1.2.2.1.8.1.6 |
Indicates the type of detection that set the current error
status. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vPost(0), vRuntime(1), vDiagnosticTest(2) |
|
a8AlarmGeneration |
1.3.6.1.4.1.318.1.2.2.1.8.1.7 |
Controls indication generation for errors. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
vOff(0), vOn(1) |
|
tMiftomib |
1.3.6.1.4.1.318.1.2.2.1.99 |
This group defines attributes required for DMI to
SNMP translati
n. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SMiftomib |
|
eMiftomib |
1.3.6.1.4.1.318.1.2.2.1.99.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SMiftomib |
|
|
a99MibName |
1.3.6.1.4.1.318.1.2.2.1.99.1.1 |
The MIB name that defines this MIF |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiDisplaystring |
|
|
a99MibOid |
1.3.6.1.4.1.318.1.2.2.1.99.1.2 |
The MIB Object Identifier that corresponds to this MIF |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiDisplaystring |
|
|
a99DisableTrap |
1.3.6.1.4.1.318.1.2.2.1.99.1.3 |
This attribute can be changed to disable sending oftraps
from this component |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
tTrapGroup |
1.3.6.1.4.1.318.1.2.2.1.9999 |
This group defines attributes needed for Trap
definition. This group does not exist in MIF file |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
STrapGroup |
|
eTrapGroup |
1.3.6.1.4.1.318.1.2.2.1.9999.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
STrapGroup |
|
|
a9999ErrorTime |
1.3.6.1.4.1.318.1.2.2.1.9999.1.1 |
The Date & Time when the error occured |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
a9999ErrorGroupId |
1.3.6.1.4.1.318.1.2.2.1.9999.1.3 |
Group ID of the errorControl Group |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999ErrorInstanceId |
1.3.6.1.4.1.318.1.2.2.1.9999.1.4 |
Instance ID of the errorControl Group |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999ComponentId |
1.3.6.1.4.1.318.1.2.2.1.9999.1.5 |
Component ID of the component that caused this error |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999GroupId |
1.3.6.1.4.1.318.1.2.2.1.9999.1.6 |
Group ID of the Group that caused this error |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999InstanceId |
1.3.6.1.4.1.318.1.2.2.1.9999.1.7 |
Instance ID of the Group that caused this error |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999VendorCode1 |
1.3.6.1.4.1.318.1.2.2.1.9999.1.8 |
Vendor specific code 1 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999VendorCode2 |
1.3.6.1.4.1.318.1.2.2.1.9999.1.9 |
Vendor specific code 2 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999VendorText |
1.3.6.1.4.1.318.1.2.2.1.9999.1.10 |
Vendor specific octet string info |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
a9999ParentGroupId |
1.3.6.1.4.1.318.1.2.2.1.9999.1.11 |
Group ID of parent of Group that caused this error |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
a9999ParentInstanceId |
1.3.6.1.4.1.318.1.2.2.1.9999.1.12 |
Instance ID of parent of Group that caused this error |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|