ALTEON-TS-NETWORK-MIB

File: ALTEON-TS-NETWORK-MIB.mib (137097 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
ALTEON-ROOT-MIB ALTEON-TIGON-SWITCH-MIB

Imported symbols

IpAddress Counter Gauge
OBJECT-TYPE PhysAddress DisplayString
switch stats information
operCmds

Defined Types

IpCurCfgIntfEntry  
SEQUENCE    
  ipCurCfgIntfIndex INTEGER
  ipCurCfgIntfAddr IpAddress
  ipCurCfgIntfMask IpAddress
  ipCurCfgIntfBroadcast IpAddress
  ipCurCfgIntfVlan INTEGER
  ipCurCfgIntfState INTEGER
  ipCurCfgIntfBootpRelay INTEGER

IpNewCfgIntfEntry  
SEQUENCE    
  ipNewCfgIntfIndex INTEGER
  ipNewCfgIntfAddr IpAddress
  ipNewCfgIntfMask IpAddress
  ipNewCfgIntfBroadcast IpAddress
  ipNewCfgIntfVlan INTEGER
  ipNewCfgIntfState INTEGER
  ipNewCfgIntfDelete INTEGER
  ipNewCfgIntfBootpRelay INTEGER

IpCurCfgGwEntry  
SEQUENCE    
  ipCurCfgGwIndex INTEGER
  ipCurCfgGwAddr IpAddress
  ipCurCfgGwInterval INTEGER
  ipCurCfgGwRetry INTEGER
  ipCurCfgGwState INTEGER
  ipCurCfgGwArp INTEGER
  ipCurCfgGwVlan INTEGER

IpNewCfgGwEntry  
SEQUENCE    
  ipNewCfgGwIndex INTEGER
  ipNewCfgGwAddr IpAddress
  ipNewCfgGwInterval INTEGER
  ipNewCfgGwRetry INTEGER
  ipNewCfgGwState INTEGER
  ipNewCfgGwDelete INTEGER
  ipNewCfgGwArp INTEGER
  ipNewCfgGwVlan INTEGER

IpCurCfgStaticRouteEntry  
SEQUENCE    
  ipCurCfgStaticRouteIndx INTEGER
  ipCurCfgStaticRouteDestIp IpAddress
  ipCurCfgStaticRouteMask IpAddress
  ipCurCfgStaticRouteGateway IpAddress
  ipCurCfgStaticRouteInterface INTEGER

IpNewCfgStaticRouteEntry  
SEQUENCE    
  ipNewCfgStaticRouteIndx INTEGER
  ipNewCfgStaticRouteDestIp IpAddress
  ipNewCfgStaticRouteMask IpAddress
  ipNewCfgStaticRouteGateway IpAddress
  ipNewCfgStaticRouteAction INTEGER
  ipNewCfgStaticRouteInterface INTEGER

IpFwdCurCfgPortEntry  
SEQUENCE    
  ipFwdCurCfgPortIndex INTEGER
  ipFwdCurCfgPortState INTEGER

IpFwdNewCfgPortEntry  
SEQUENCE    
  ipFwdNewCfgPortIndex INTEGER
  ipFwdNewCfgPortState INTEGER

IpFwdCurCfgLocalEntry  
SEQUENCE    
  ipFwdCurCfgLocalIndex INTEGER
  ipFwdCurCfgLocalSubnet IpAddress
  ipFwdCurCfgLocalMask IpAddress

IpFwdNewCfgLocalEntry  
SEQUENCE    
  ipFwdNewCfgLocalIndex INTEGER
  ipFwdNewCfgLocalSubnet IpAddress
  ipFwdNewCfgLocalMask IpAddress
  ipFwdNewCfgLocalDelete INTEGER

VrrpCurCfgVirtRtrTableEntry  
SEQUENCE    
  vrrpCurCfgVirtRtrIndx INTEGER
  vrrpCurCfgVirtRtrID INTEGER
  vrrpCurCfgVirtRtrAddr IpAddress
  vrrpCurCfgVirtRtrIfIndex INTEGER
  vrrpCurCfgVirtRtrInterval INTEGER
  vrrpCurCfgVirtRtrPriority INTEGER
  vrrpCurCfgVirtRtrPreempt INTEGER
  vrrpCurCfgVirtRtrState INTEGER
  vrrpCurCfgVirtRtrSharing INTEGER
  vrrpCurCfgVirtRtrTckVirtRtr INTEGER
  vrrpCurCfgVirtRtrTckIpIntf INTEGER
  vrrpCurCfgVirtRtrTckVlanPort INTEGER
  vrrpCurCfgVirtRtrTckL4Port INTEGER
  vrrpCurCfgVirtRtrTckRServer INTEGER
  vrrpCurCfgVirtRtrTckHsrp INTEGER
  vrrpCurCfgVirtRtrTckHsrv INTEGER

VrrpNewCfgVirtRtrTableEntry  
SEQUENCE    
  vrrpNewCfgVirtRtrIndx INTEGER
  vrrpNewCfgVirtRtrID INTEGER
  vrrpNewCfgVirtRtrAddr IpAddress
  vrrpNewCfgVirtRtrIfIndex INTEGER
  vrrpNewCfgVirtRtrInterval INTEGER
  vrrpNewCfgVirtRtrPriority INTEGER
  vrrpNewCfgVirtRtrPreempt INTEGER
  vrrpNewCfgVirtRtrState INTEGER
  vrrpNewCfgVirtRtrDelete INTEGER
  vrrpNewCfgVirtRtrSharing INTEGER
  vrrpNewCfgVirtRtrTckVirtRtr INTEGER
  vrrpNewCfgVirtRtrTckIpIntf INTEGER
  vrrpNewCfgVirtRtrTckVlanPort INTEGER
  vrrpNewCfgVirtRtrTckL4Port INTEGER
  vrrpNewCfgVirtRtrTckRServer INTEGER
  vrrpNewCfgVirtRtrTckHsrp INTEGER
  vrrpNewCfgVirtRtrTckHsrv INTEGER

VrrpCurCfgIfTableEntry  
SEQUENCE    
  vrrpCurCfgIfIndx INTEGER
  vrrpCurCfgIfAuthType INTEGER
  vrrpCurCfgIfPasswd DisplayString

VrrpNewCfgIfTableEntry  
SEQUENCE    
  vrrpNewCfgIfIndx INTEGER
  vrrpNewCfgIfAuthType INTEGER
  vrrpNewCfgIfPasswd DisplayString
  vrrpNewCfgIfDelete INTEGER

VrrpCurCfgVirtRtrGrpTableEntry  
SEQUENCE    
  vrrpCurCfgVirtRtrGrpIndx INTEGER
  vrrpCurCfgVirtRtrGrpID INTEGER
  vrrpCurCfgVirtRtrGrpIfIndex INTEGER
  vrrpCurCfgVirtRtrGrpInterval INTEGER
  vrrpCurCfgVirtRtrGrpPriority INTEGER
  vrrpCurCfgVirtRtrGrpPreempt INTEGER
  vrrpCurCfgVirtRtrGrpState INTEGER
  vrrpCurCfgVirtRtrGrpSharing INTEGER
  vrrpCurCfgVirtRtrGrpTckVirtRtr INTEGER
  vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER
  vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER
  vrrpCurCfgVirtRtrGrpTckL4Port INTEGER
  vrrpCurCfgVirtRtrGrpTckRServer INTEGER
  vrrpCurCfgVirtRtrGrpTckHsrp INTEGER
  vrrpCurCfgVirtRtrGrpTckHsrv INTEGER

VrrpNewCfgVirtRtrGrpTableEntry  
SEQUENCE    
  vrrpNewCfgVirtRtrGrpIndx INTEGER
  vrrpNewCfgVirtRtrGrpID INTEGER
  vrrpNewCfgVirtRtrGrpIfIndex INTEGER
  vrrpNewCfgVirtRtrGrpInterval INTEGER
  vrrpNewCfgVirtRtrGrpPriority INTEGER
  vrrpNewCfgVirtRtrGrpPreempt INTEGER
  vrrpNewCfgVirtRtrGrpState INTEGER
  vrrpNewCfgVirtRtrGrpDelete INTEGER
  vrrpNewCfgVirtRtrGrpSharing INTEGER
  vrrpNewCfgVirtRtrGrpTckVirtRtr INTEGER
  vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER
  vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER
  vrrpNewCfgVirtRtrGrpTckL4Port INTEGER
  vrrpNewCfgVirtRtrGrpTckRServer INTEGER
  vrrpNewCfgVirtRtrGrpTckHsrp INTEGER
  vrrpNewCfgVirtRtrGrpTckHsrv INTEGER

IpRouteInfoEntry  
SEQUENCE    
  ipRouteInfoIndx INTEGER
  ipRouteInfoDestIp IpAddress
  ipRouteInfoMask IpAddress
  ipRouteInfoGateway IpAddress
  ipRouteInfoTag INTEGER
  ipRouteInfoType INTEGER
  ipRouteInfoInterface INTEGER

OspfCurCfgAreaEntry  
SEQUENCE    
  ospfCurCfgAreaIndex INTEGER
  ospfCurCfgAreaId IpAddress
  ospfCurCfgAreaSpfInterval INTEGER
  ospfCurCfgAreaAuthType INTEGER

OspfNewCfgAreaEntry  
SEQUENCE    
  ospfNewCfgAreaIndex INTEGER
  ospfNewCfgAreaId IpAddress
  ospfNewCfgAreaSpfInterval INTEGER
  ospfNewCfgAreaAuthType INTEGER

OspfAreaRxTxStatsEntry  
SEQUENCE    
  ospfAreaRxTxIndex INTEGER
  ospfAreaRxPkts Counter
  ospfAreaTxPkts Counter
  ospfAreaRxHello Counter
  ospfAreaTxHello Counter
  ospfAreaRxDatabase Counter
  ospfAreaTxDatabase Counter
  ospfAreaRxlsReqs Counter
  ospfAreaTxlsReqs Counter
  ospfAreaRxlsAcks Counter
  ospfAreaTxlsAcks Counter
  ospfAreaRxlsUpdates Counter
  ospfAreaTxlsUpdates Counter

OspfAreaNbrChangeStatsEntry  
SEQUENCE    
  ospfAreaNbrIndex INTEGER
  ospfAreaNbrhello Counter
  ospfAreaNbrStart Counter
  ospfAreaNbrAdjointOk Counter
  ospfAreaNbrNegotiationDone Counter
  ospfAreaNbrExchangeDone Counter
  ospfAreaNbrBadRequests Counter
  ospfAreaNbrBadSequence Counter
  ospfAreaNbrLoadingDone Counter
  ospfAreaNbrN1way Counter
  ospfAreaNbrRstAd Counter
  ospfAreaNbrDown Counter

OspfAreaChangeStatsEntry  
SEQUENCE    
  ospfAreaIntfIndex INTEGER
  ospfAreaIntfHello Counter
  ospfAreaIntfDown Counter
  ospfAreaIntfLoop Counter
  ospfAreaIntfUnloop Counter
  ospfAreaIntfWaitTimer Counter
  ospfAreaIntfBackup Counter
  ospfAreaIntfNbrChange Counter

OspfIntfRxTxStatsEntry  
SEQUENCE    
  ospfIntfRxTxIndex INTEGER
  ospfIntfRxPkts Counter
  ospfIntfTxPkts Counter
  ospfIntfRxHello Counter
  ospfIntfTxHello Counter
  ospfIntfRxDatabase Counter
  ospfIntfTxDatabase Counter
  ospfIntfRxlsReqs Counter
  ospfIntfTxlsReqs Counter
  ospfIntfRxlsAcks Counter
  ospfIntfTxlsAcks Counter
  ospfIntfRxlsUpdates Counter
  ospfIntfTxlsUpdates Counter

OspfIntfNbrChangeStatsEntry  
SEQUENCE    
  ospfIntfNbrIndex INTEGER
  ospfIntfNbrhello Counter
  ospfIntfNbrStart Counter
  ospfIntfNbrAdjointOk Counter
  ospfIntfNbrNegotiationDone Counter
  ospfIntfNbrExchangeDone Counter
  ospfIntfNbrBadRequests Counter
  ospfIntfNbrBadSequence Counter
  ospfIntfNbrLoadingDone Counter
  ospfIntfNbrN1way Counter
  ospfIntfNbrRstAd Counter
  ospfIntfNbrDown Counter

OspfIntfChangeStatsEntry  
SEQUENCE    
  ospfIntfIndex INTEGER
  ospfIntfHello Counter
  ospfIntfDown Counter
  ospfIntfLoop Counter
  ospfIntfUnloop Counter
  ospfIntfWaitTimer Counter
  ospfIntfBackup Counter
  ospfIntfNbrChange Counter

OspfAreaInfoEntry  
SEQUENCE    
  ospfAreaInfoIndex INTEGER
  ospfTotalNumberOfInterfaces INTEGER
  ospfNumberOfInterfacesUp INTEGER
  ospfNumberOfLsdbEntries INTEGER
  ospfAreaInfoId IpAddress

OspfIntfInfoEntry  
SEQUENCE    
  ospfIfInfoIndex INTEGER
  ospfIfDesignatedRouterIP IpAddress
  ospfIfBackupDesignatedRouterIP IpAddress
  ospfIfWaitInterval INTEGER
  ospfIfTotalNeighbours INTEGER
  ospfIfInfoIpAddress IpAddress

OspfRouterLSAInfoEntry  
SEQUENCE    
  routerLSAAreaIndex INTEGER
  routerLSALinkIndex INTEGER
  routerLSAId IpAddress
  routerLSALinkID IpAddress
  routerLSALinkData IpAddress
  routerLSALinkIfIndex INTEGER
  routerLSANoOfTOSMetrics INTEGER
  routerLSANoOfTOSZeroMetrics INTEGER

AgArpInfoEntry  
SEQUENCE    
  arpInfoDestIp IpAddress
  arpInfoMacAddr PhysAddress
  arpInfoVLAN INTEGER
  arpInfoSrcPort INTEGER
  arpInfoRefPorts INTEGER
  arpInfoFlag INTEGER

VrrpInfoVirtRtrTableEntry  
SEQUENCE    
  vrrpInfoVirtRtrIndex INTEGER
  vrrpInfoVirtRtrState INTEGER
  vrrpInfoVirtRtrOwnership INTEGER
  vrrpInfoVirtRtrServer INTEGER
  vrrpInfoVirtRtrProxy INTEGER

VrrpOperVirtRtrEntry  
SEQUENCE    
  vrrpOperVirtRtrIndex INTEGER
  vrrpOperVirtRtrBackup INTEGER

Defined Values

iprouting 1.3.6.1.4.1.1872.2.1.3
OBJECT IDENTIFIER    

vrrp 1.3.6.1.4.1.1872.2.1.15
OBJECT IDENTIFIER    

ripStats 1.3.6.1.4.1.1872.2.1.8.1
OBJECT IDENTIFIER    

arpStats 1.3.6.1.4.1.1872.2.1.8.3
OBJECT IDENTIFIER    

routeStats 1.3.6.1.4.1.1872.2.1.8.4
OBJECT IDENTIFIER    

dnsStats 1.3.6.1.4.1.1872.2.1.8.5
OBJECT IDENTIFIER    

vrrpStats 1.3.6.1.4.1.1872.2.1.8.9
OBJECT IDENTIFIER    

ospfStats 1.3.6.1.4.1.1872.2.1.8.22
OBJECT IDENTIFIER    

ip-info 1.3.6.1.4.1.1872.2.1.9.3
OBJECT IDENTIFIER    

vrrp-info 1.3.6.1.4.1.1872.2.1.9.4
OBJECT IDENTIFIER    

ospfinfo 1.3.6.1.4.1.1872.2.1.9.5
OBJECT IDENTIFIER    

vrrpOper 1.3.6.1.4.1.1872.2.1.14.5
OBJECT IDENTIFIER    

ipInterfaceTableMax 1.3.6.1.4.1.1872.2.1.3.1
The maximum number of rows in the IP interface table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipCurCfgIntfTable 1.3.6.1.4.1.1872.2.1.3.2
The table of IP interface configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgIntfEntry

ipCurCfgIntfEntry 1.3.6.1.4.1.1872.2.1.3.2.1
A row in the Ip interface table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpCurCfgIntfEntry  

ipCurCfgIntfIndex 1.3.6.1.4.1.1872.2.1.3.2.1.1
The interface number for which the IP information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipCurCfgIntfAddr 1.3.6.1.4.1.1872.2.1.3.2.1.2
The IP address of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfMask 1.3.6.1.4.1.1872.2.1.3.2.1.3
The subnet mask of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfBroadcast 1.3.6.1.4.1.1872.2.1.3.2.1.4
The broadcast address of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfVlan 1.3.6.1.4.1.1872.2.1.3.2.1.5
The VLAN associated with the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

ipCurCfgIntfState 1.3.6.1.4.1.1872.2.1.3.2.1.6
The state of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipCurCfgIntfBootpRelay 1.3.6.1.4.1.1872.2.1.3.2.1.7
Enable/disable BOOTP relay.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgIntfTable 1.3.6.1.4.1.1872.2.1.3.3
The table of interface configuration in the New Configuration Block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgIntfEntry

ipNewCfgIntfEntry 1.3.6.1.4.1.1872.2.1.3.3.1
A row in the Ip interface table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpNewCfgIntfEntry  

ipNewCfgIntfIndex 1.3.6.1.4.1.1872.2.1.3.3.1.1
The interface number for which the IP information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipNewCfgIntfAddr 1.3.6.1.4.1.1872.2.1.3.3.1.2
The IP address of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfMask 1.3.6.1.4.1.1872.2.1.3.3.1.3
The subnet mask of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfBroadcast 1.3.6.1.4.1.1872.2.1.3.3.1.4
The broadcast address of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfVlan 1.3.6.1.4.1.1872.2.1.3.3.1.5
The VLAN associated with the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

ipNewCfgIntfState 1.3.6.1.4.1.1872.2.1.3.3.1.6
The state of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgIntfDelete 1.3.6.1.4.1.1872.2.1.3.3.1.7
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgIntfBootpRelay 1.3.6.1.4.1.1872.2.1.3.3.1.8
Enable/disable BOOTP relay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipGatewayTableMax 1.3.6.1.4.1.1872.2.1.3.4
The maximum number of rows in the IP gateway table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipCurCfgGwTable 1.3.6.1.4.1.1872.2.1.3.5
The table of gateways in the Current configuration Block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgGwEntry

ipCurCfgGwEntry 1.3.6.1.4.1.1872.2.1.3.5.1
A row in the Ip gateway table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpCurCfgGwEntry  

ipCurCfgGwIndex 1.3.6.1.4.1.1872.2.1.3.5.1.1
The gateway number for which the information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipCurCfgGwAddr 1.3.6.1.4.1.1872.2.1.3.5.1.2
The IP address of the default gateway.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgGwInterval 1.3.6.1.4.1.1872.2.1.3.5.1.3
The interval between ping attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..60  

ipCurCfgGwRetry 1.3.6.1.4.1.1872.2.1.3.5.1.4
The number of failed attempts to declare the default gateway DOWN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

ipCurCfgGwState 1.3.6.1.4.1.1872.2.1.3.5.1.5
The state of the default gateway.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipCurCfgGwArp 1.3.6.1.4.1.1872.2.1.3.5.1.6
The state of ARP only health checks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgGwTable 1.3.6.1.4.1.1872.2.1.3.6
The table of gateway configuration in the new configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgGwEntry

ipCurCfgGwVlan 1.3.6.1.4.1.1872.2.1.3.5.1.7
The VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the first 4 entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4094  

ipNewCfgGwEntry 1.3.6.1.4.1.1872.2.1.3.6.1
A row in the Ip default gateway table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpNewCfgGwEntry  

ipNewCfgGwIndex 1.3.6.1.4.1.1872.2.1.3.6.1.1
The gateway number for which the information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipNewCfgGwAddr 1.3.6.1.4.1.1872.2.1.3.6.1.2
The IP address of the default gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgGwInterval 1.3.6.1.4.1.1872.2.1.3.6.1.3
The interval in seconds between ping attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

ipNewCfgGwRetry 1.3.6.1.4.1.1872.2.1.3.6.1.4
The number of failed attempts to declare the default gateway DOWN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

ipNewCfgGwState 1.3.6.1.4.1.1872.2.1.3.6.1.5
The state of the default gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgGwDelete 1.3.6.1.4.1.1872.2.1.3.6.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgGwArp 1.3.6.1.4.1.1872.2.1.3.6.1.7
The state of the ARP only health checks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgGwVlan 1.3.6.1.4.1.1872.2.1.3.6.1.8
The VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the first 4 entries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

ipCurCfgStaticRouteTable 1.3.6.1.4.1.1872.2.1.3.7
The table of static routes in the current configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgStaticRouteEntry

ipCurCfgStaticRouteEntry 1.3.6.1.4.1.1872.2.1.3.7.1
A row in the static IP route table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpCurCfgStaticRouteEntry  

ipCurCfgStaticRouteIndx 1.3.6.1.4.1.1872.2.1.3.7.1.1
The index of the static routing table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipCurCfgStaticRouteDestIp 1.3.6.1.4.1.1872.2.1.3.7.1.2
The destination IP address of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteMask 1.3.6.1.4.1.1872.2.1.3.7.1.3
The destination IP address of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteGateway 1.3.6.1.4.1.1872.2.1.3.7.1.4
The destination IP address of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteInterface 1.3.6.1.4.1.1872.2.1.3.7.1.5
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipNewCfgStaticRouteTable 1.3.6.1.4.1.1872.2.1.3.8
The table of static routes in the new configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgStaticRouteEntry

ipNewCfgStaticRouteEntry 1.3.6.1.4.1.1872.2.1.3.8.1
A row in the static IP route table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpNewCfgStaticRouteEntry  

ipNewCfgStaticRouteIndx 1.3.6.1.4.1.1872.2.1.3.8.1.1
The index of the static routing table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipNewCfgStaticRouteDestIp 1.3.6.1.4.1.1872.2.1.3.8.1.2
The destination IP address of this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteMask 1.3.6.1.4.1.1872.2.1.3.8.1.3
The subnet mask of this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteGateway 1.3.6.1.4.1.1872.2.1.3.8.1.4
The IP address of the gateway for this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteAction 1.3.6.1.4.1.1872.2.1.3.8.1.5
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgStaticRouteInterface 1.3.6.1.4.1.1872.2.1.3.8.1.6
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipForward 1.3.6.1.4.1.1872.2.1.3.9
OBJECT IDENTIFIER    

ripConfig 1.3.6.1.4.1.1872.2.1.3.9.1
OBJECT IDENTIFIER    

ripCurCfgSupply 1.3.6.1.4.1.1872.2.1.3.9.1.1
Enable or disable supplying route updates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgSupply 1.3.6.1.4.1.1872.2.1.3.9.1.2
Enable or disable supplying route updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgListen 1.3.6.1.4.1.1872.2.1.3.9.1.3
Enable or disable listening to route updates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgListen 1.3.6.1.4.1.1872.2.1.3.9.1.4
Enable or disable listening to route updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgDefListen 1.3.6.1.4.1.1872.2.1.3.9.1.5
Enable or disable listening to default routes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgDefListen 1.3.6.1.4.1.1872.2.1.3.9.1.6
Enable or disable listening to default routes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgStaticSupply 1.3.6.1.4.1.1872.2.1.3.9.1.7
Enable or disable supplying static route updates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgStaticSupply 1.3.6.1.4.1.1872.2.1.3.9.1.8
Enable or disable supplying static route updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgUpdatePeriod 1.3.6.1.4.1.1872.2.1.3.9.1.9
Update Period in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

ripNewCfgUpdatePeriod 1.3.6.1.4.1.1872.2.1.3.9.1.10
Update period in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

ripCurCfgState 1.3.6.1.4.1.1872.2.1.3.9.1.11
RIP global state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ripNewCfgState 1.3.6.1.4.1.1872.2.1.3.9.1.12
Globally turn RIP on or off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ripCurCfgPoisonReverse 1.3.6.1.4.1.1872.2.1.3.9.1.13
RIP poison reverse.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgPoisonReverse 1.3.6.1.4.1.1872.2.1.3.9.1.14
RIP poison reverse.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgVip 1.3.6.1.4.1.1872.2.1.3.9.1.15
Advertise VIP Host Routes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgVip 1.3.6.1.4.1.1872.2.1.3.9.1.16
Advertise VIP Host Routes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipFwdCurCfgPortTable 1.3.6.1.4.1.1872.2.1.3.9.2
The table of ports and their forwarding states
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFwdCurCfgPortEntry

ipFwdCurCfgPortEntry 1.3.6.1.4.1.1872.2.1.3.9.2.1
A row in the ipFwdCurCfgPortTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFwdCurCfgPortEntry  

ipFwdCurCfgPortIndex 1.3.6.1.4.1.1872.2.1.3.9.2.1.1
The port number for which the forwarding state information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFwdCurCfgPortState 1.3.6.1.4.1.1872.2.1.3.9.2.1.2
The forwarding state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipFwdNewCfgPortTable 1.3.6.1.4.1.1872.2.1.3.9.3
The table of ports and their forwarding states
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFwdNewCfgPortEntry

ipFwdNewCfgPortEntry 1.3.6.1.4.1.1872.2.1.3.9.3.1
A row in the ipFwdNewCfgPortTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFwdNewCfgPortEntry  

ipFwdNewCfgPortIndex 1.3.6.1.4.1.1872.2.1.3.9.3.1.1
The port number for which the forwarding state information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFwdNewCfgPortState 1.3.6.1.4.1.1872.2.1.3.9.3.1.2
The forwarding state of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipFwdCurCfgLocalTable 1.3.6.1.4.1.1872.2.1.3.9.14
The table of local network definition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFwdCurCfgLocalEntry

ipFwdCurCfgLocalEntry 1.3.6.1.4.1.1872.2.1.3.9.14.1
A row in the ipFwdCurCfgLocalTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFwdCurCfgLocalEntry  

ipFwdCurCfgLocalIndex 1.3.6.1.4.1.1872.2.1.3.9.14.1.1
The index of ipFwdCurCfgLocalTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFwdCurCfgLocalSubnet 1.3.6.1.4.1.1872.2.1.3.9.14.1.2
The current local IP subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipFwdCurCfgLocalMask 1.3.6.1.4.1.1872.2.1.3.9.14.1.3
The current local IP subnet mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipFwdNewCfgLocalTable 1.3.6.1.4.1.1872.2.1.3.9.15
The table of local network definition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFwdNewCfgLocalEntry

ipFwdNewCfgLocalEntry 1.3.6.1.4.1.1872.2.1.3.9.15.1
A row in the ipFwdNewCfgLocalTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFwdNewCfgLocalEntry  

ipFwdNewCfgLocalIndex 1.3.6.1.4.1.1872.2.1.3.9.15.1.1
The index of ipFwdNewCfgLocalTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFwdNewCfgLocalSubnet 1.3.6.1.4.1.1872.2.1.3.9.15.1.2
The new local IP subnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFwdNewCfgLocalMask 1.3.6.1.4.1.1872.2.1.3.9.15.1.3
The new local IP subnet mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFwdNewCfgLocalDelete 1.3.6.1.4.1.1872.2.1.3.9.15.1.4
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipFwdCurCfgState 1.3.6.1.4.1.1872.2.1.3.9.8
IP forwarding global state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ipFwdNewCfgState 1.3.6.1.4.1.1872.2.1.3.9.9
IP forwarding global state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ipFwdCurCfgDirectedBcast 1.3.6.1.4.1.1872.2.1.3.9.10
Enable or disable forwarding directed broadcasts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipFwdNewCfgDirectedBcast 1.3.6.1.4.1.1872.2.1.3.9.11
Enable or disable forwarding directed broadcasts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipFwdPortTableMaxSize 1.3.6.1.4.1.1872.2.1.3.9.12
The maximum number of rows in the IP Port table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFwdLocalTableMaxSize 1.3.6.1.4.1.1872.2.1.3.9.13
The maximum number of rows in the Local table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpCurCfgReARPPeriod 1.3.6.1.4.1.1872.2.1.3.10
Re-ARP Period in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..120  

arpNewCfgReARPPeriod 1.3.6.1.4.1.1872.2.1.3.11
Re-ARP Period in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..120  

ipCurCfgGwMetric 1.3.6.1.4.1.1872.2.1.3.12
The default gateway metric.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2)  

ipNewCfgGwMetric 1.3.6.1.4.1.1872.2.1.3.13
The default gateway metric.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2)  

ipCurCfgBootpAddr 1.3.6.1.4.1.1872.2.1.3.14
The IP address of BOOTP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipNewCfgBootpAddr 1.3.6.1.4.1.1872.2.1.3.15
The IP address of BOOTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipCurCfgBootpAddr2 1.3.6.1.4.1.1872.2.1.3.16
The IP address of second BOOTP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipNewCfgBootpAddr2 1.3.6.1.4.1.1872.2.1.3.17
The IP address of second BOOTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipCurCfgBootpState 1.3.6.1.4.1.1872.2.1.3.18
The state of BOOTP relay.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgBootpState 1.3.6.1.4.1.1872.2.1.3.19
The state of BOOTP relay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipStaticRouteTableMaxSize 1.3.6.1.4.1.1872.2.1.3.20
The maximum number of rows in the Static Route table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpGeneral 1.3.6.1.4.1.1872.2.1.15.1
OBJECT IDENTIFIER    

vrrpCurCfgGenState 1.3.6.1.4.1.1872.2.1.15.1.1
Enable or disable VRRP operation globally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgGenState 1.3.6.1.4.1.1872.2.1.15.1.2
Enable or disable VRRP operation globally.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgGenTckVirtRtrInc 1.3.6.1.4.1.1872.2.1.15.1.3
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckVirtRtrInc 1.3.6.1.4.1.1872.2.1.15.1.4
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckIpIntfInc 1.3.6.1.4.1.1872.2.1.15.1.5
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckIpIntfInc 1.3.6.1.4.1.1872.2.1.15.1.6
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckVlanPortInc 1.3.6.1.4.1.1872.2.1.15.1.7
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckVlanPortInc 1.3.6.1.4.1.1872.2.1.15.1.8
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckL4PortInc 1.3.6.1.4.1.1872.2.1.15.1.9
The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckL4PortInc 1.3.6.1.4.1.1872.2.1.15.1.10
The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckRServerInc 1.3.6.1.4.1.1872.2.1.15.1.11
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckRServerInc 1.3.6.1.4.1.1872.2.1.15.1.12
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckHsrpInc 1.3.6.1.4.1.1872.2.1.15.1.13
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckHsrpInc 1.3.6.1.4.1.1872.2.1.15.1.14
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenHotstandby 1.3.6.1.4.1.1872.2.1.15.1.15
Enable or disable hotstandby processing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgGenHotstandby 1.3.6.1.4.1.1872.2.1.15.1.16
Enable or disable hotstandby processing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgGenTckHsrvInc 1.3.6.1.4.1.1872.2.1.15.1.17
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckHsrvInc 1.3.6.1.4.1.1872.2.1.15.1.18
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgVirtRtrTable 1.3.6.1.4.1.1872.2.1.15.2
The table of VRRP virtual routers configuration in current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpCurCfgVirtRtrTableEntry

vrrpCurCfgVirtRtrTableEntry 1.3.6.1.4.1.1872.2.1.15.2.1
Information about a VRRP virtual router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpCurCfgVirtRtrTableEntry  

vrrpCurCfgVirtRtrIndx 1.3.6.1.4.1.1872.2.1.15.2.1.1
The VRRP virtual router table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpCurCfgVirtRtrID 1.3.6.1.4.1.1872.2.1.15.2.1.2
The VRRP virtual router identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrAddr 1.3.6.1.4.1.1872.2.1.15.2.1.3
The VRRP virtual router IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vrrpCurCfgVirtRtrIfIndex 1.3.6.1.4.1.1872.2.1.15.2.1.4
The IfIndex that the VRRP virtual router is representing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpCurCfgVirtRtrInterval 1.3.6.1.4.1.1872.2.1.15.2.1.5
The time interval between VRRP advertisements in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrPriority 1.3.6.1.4.1.1872.2.1.15.2.1.6
The priority value to be used by the specified VRRP virtual routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

vrrpCurCfgVirtRtrPreempt 1.3.6.1.4.1.1872.2.1.15.2.1.7
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrState 1.3.6.1.4.1.1872.2.1.15.2.1.8
Enable or disable the VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrSharing 1.3.6.1.4.1.1872.2.1.15.2.1.9
Enable or disable load sharing of non-master virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.2.1.10
Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckIpIntf 1.3.6.1.4.1.1872.2.1.15.2.1.11
Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckVlanPort 1.3.6.1.4.1.1872.2.1.15.2.1.12
Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckL4Port 1.3.6.1.4.1.1872.2.1.15.2.1.13
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckRServer 1.3.6.1.4.1.1872.2.1.15.2.1.14
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckHsrp 1.3.6.1.4.1.1872.2.1.15.2.1.15
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckHsrv 1.3.6.1.4.1.1872.2.1.15.2.1.16
Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTable 1.3.6.1.4.1.1872.2.1.15.3
The table of VRRP virtual routers configuration in current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpNewCfgVirtRtrTableEntry

vrrpNewCfgVirtRtrTableEntry 1.3.6.1.4.1.1872.2.1.15.3.1
Information about a VRRP virtual router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpNewCfgVirtRtrTableEntry  

vrrpNewCfgVirtRtrIndx 1.3.6.1.4.1.1872.2.1.15.3.1.1
The VRRP virtual router table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpNewCfgVirtRtrID 1.3.6.1.4.1.1872.2.1.15.3.1.2
The VRRP virtual router identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrAddr 1.3.6.1.4.1.1872.2.1.15.3.1.3
The VRRP virtual router IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vrrpNewCfgVirtRtrIfIndex 1.3.6.1.4.1.1872.2.1.15.3.1.4
The IfIndex that the VRRP virtual router is representing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vrrpNewCfgVirtRtrInterval 1.3.6.1.4.1.1872.2.1.15.3.1.5
The time interval between VRRP advertisements in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrPriority 1.3.6.1.4.1.1872.2.1.15.3.1.6
The priority value to be used by the specified VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

vrrpNewCfgVirtRtrPreempt 1.3.6.1.4.1.1872.2.1.15.3.1.7
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrState 1.3.6.1.4.1.1872.2.1.15.3.1.8
Enable or disable the VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrDelete 1.3.6.1.4.1.1872.2.1.15.3.1.9
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vrrpNewCfgVirtRtrSharing 1.3.6.1.4.1.1872.2.1.15.3.1.10
Enable or disable load sharing of non-master virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.3.1.11
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckIpIntf 1.3.6.1.4.1.1872.2.1.15.3.1.12
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckVlanPort 1.3.6.1.4.1.1872.2.1.15.3.1.13
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckL4Port 1.3.6.1.4.1.1872.2.1.15.3.1.14
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckRServer 1.3.6.1.4.1.1872.2.1.15.3.1.15
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckHsrp 1.3.6.1.4.1.1872.2.1.15.3.1.16
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckHsrv 1.3.6.1.4.1.1872.2.1.15.3.1.17
Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgIfTable 1.3.6.1.4.1.1872.2.1.15.4
The table of VRRP interface configuration in current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpCurCfgIfTableEntry

vrrpCurCfgIfTableEntry 1.3.6.1.4.1.1872.2.1.15.4.1
Information about a VRRP interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpCurCfgIfTableEntry  

vrrpCurCfgIfIndx 1.3.6.1.4.1.1872.2.1.15.4.1.1
The VRRP interface index. This is eqivalent to IfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpCurCfgIfAuthType 1.3.6.1.4.1.1872.2.1.15.4.1.2
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), simple-text-password(2)  

vrrpCurCfgIfPasswd 1.3.6.1.4.1.1872.2.1.15.4.1.3
The password for authentication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

vrrpNewCfgIfTable 1.3.6.1.4.1.1872.2.1.15.5
The table of VRRP interface configuration in current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpNewCfgIfTableEntry

vrrpNewCfgIfTableEntry 1.3.6.1.4.1.1872.2.1.15.5.1
Information about a VRRP interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpNewCfgIfTableEntry  

vrrpNewCfgIfIndx 1.3.6.1.4.1.1872.2.1.15.5.1.1
The VRRP interface index. This is eqivalent to IfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpNewCfgIfAuthType 1.3.6.1.4.1.1872.2.1.15.5.1.2
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), simple-text-password(2)  

vrrpNewCfgIfPasswd 1.3.6.1.4.1.1872.2.1.15.5.1.3
The password for authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..7)  

vrrpNewCfgIfDelete 1.3.6.1.4.1.1872.2.1.15.5.1.4
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vrrpCurCfgVirtRtrGrpTable 1.3.6.1.4.1.1872.2.1.15.6
The table of VRRP virtual router group in current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpCurCfgVirtRtrGrpTableEntry

vrrpCurCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.1872.2.1.15.6.1
Information about a VRRP failover virtual router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpCurCfgVirtRtrGrpTableEntry  

vrrpCurCfgVirtRtrGrpIndx 1.3.6.1.4.1.1872.2.1.15.6.1.1
The VRRP virtual router table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpCurCfgVirtRtrGrpID 1.3.6.1.4.1.1872.2.1.15.6.1.2
The VRRP virtual router identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.1872.2.1.15.6.1.3
The IfIndex that the VRRP virtual router is representing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpCurCfgVirtRtrGrpInterval 1.3.6.1.4.1.1872.2.1.15.6.1.4
The time interval between VRRP advertisements in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrGrpPriority 1.3.6.1.4.1.1872.2.1.15.6.1.5
The priority value to be used by the specified VRRP virtual routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

vrrpCurCfgVirtRtrGrpPreempt 1.3.6.1.4.1.1872.2.1.15.6.1.6
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpState 1.3.6.1.4.1.1872.2.1.15.6.1.7
Enable or disable the VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpSharing 1.3.6.1.4.1.1872.2.1.15.6.1.8
Enable or disable load sharing of non-master virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.6.1.9
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.1872.2.1.15.6.1.10
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.1872.2.1.15.6.1.11
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckL4Port 1.3.6.1.4.1.1872.2.1.15.6.1.12
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckRServer 1.3.6.1.4.1.1872.2.1.15.6.1.13
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckHsrp 1.3.6.1.4.1.1872.2.1.15.6.1.14
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckHsrv 1.3.6.1.4.1.1872.2.1.15.6.1.15
Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTable 1.3.6.1.4.1.1872.2.1.15.7
The table of VRRP virtual router group configuration in new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpNewCfgVirtRtrGrpTableEntry

vrrpNewCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.1872.2.1.15.7.1
Information about a VRRP failover virtual router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpNewCfgVirtRtrGrpTableEntry  

vrrpNewCfgVirtRtrGrpIndx 1.3.6.1.4.1.1872.2.1.15.7.1.1
The VRRP virtual router table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpNewCfgVirtRtrGrpID 1.3.6.1.4.1.1872.2.1.15.7.1.2
The VRRP virtual router identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.1872.2.1.15.7.1.3
The IfIndex that the VRRP virtual router is representing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vrrpNewCfgVirtRtrGrpInterval 1.3.6.1.4.1.1872.2.1.15.7.1.4
The time interval between VRRP advertisements in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrGrpPriority 1.3.6.1.4.1.1872.2.1.15.7.1.5
The priority value to be used by the specified VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

vrrpNewCfgVirtRtrGrpPreempt 1.3.6.1.4.1.1872.2.1.15.7.1.6
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpState 1.3.6.1.4.1.1872.2.1.15.7.1.7
Enable or disable the VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpDelete 1.3.6.1.4.1.1872.2.1.15.7.1.8
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vrrpNewCfgVirtRtrGrpSharing 1.3.6.1.4.1.1872.2.1.15.7.1.9
Enable or disable load sharing of non-master virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.7.1.10
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.1872.2.1.15.7.1.11
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.1872.2.1.15.7.1.12
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckL4Port 1.3.6.1.4.1.1872.2.1.15.7.1.13
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckRServer 1.3.6.1.4.1.1872.2.1.15.7.1.14
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckHsrp 1.3.6.1.4.1.1872.2.1.15.7.1.15
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckHsrv 1.3.6.1.4.1.1872.2.1.15.7.1.16
Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpVirtRtrTableMaxSize 1.3.6.1.4.1.1872.2.1.15.8
The maximum number of entries in VRRP virtual router table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpIfTableMaxSize 1.3.6.1.4.1.1872.2.1.15.9
The maximum number of entries in VRRP interface table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpVirtRtrGrpTableMaxSize 1.3.6.1.4.1.1872.2.1.15.10
The maximum number of entries in VRRP Group table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ripStatInPkts 1.3.6.1.4.1.1872.2.1.8.1.1
The total number of good RIP packets recieved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ripStatOutPkts 1.3.6.1.4.1.1872.2.1.8.1.2
The total number of RIP packets transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ripStatInErrorPkts 1.3.6.1.4.1.1872.2.1.8.1.3
The total number of error RIP packets recieved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ripStatRoutesAgedOut 1.3.6.1.4.1.1872.2.1.8.1.4
The total number of RIP routes which have aged out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

arpStatEntries 1.3.6.1.4.1.1872.2.1.8.3.1
The current number of ARP entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

arpStatHighWater 1.3.6.1.4.1.1872.2.1.8.3.2
The highest number of ARP entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

arpStatMaxEntries 1.3.6.1.4.1.1872.2.1.8.3.3
The maximum number of ARP entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

routeStatEntries 1.3.6.1.4.1.1872.2.1.8.4.1
The current number of IP routes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

routeStatHighWater 1.3.6.1.4.1.1872.2.1.8.4.2
The highest number of IP routes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

routeStatMaxEntries 1.3.6.1.4.1.1872.2.1.8.4.3
The maximum number of IP routes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dnsStatInGoodDnsRequests 1.3.6.1.4.1.1872.2.1.8.5.1
The number of good DNS requests which are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dnsStatInBadDnsRequests 1.3.6.1.4.1.1872.2.1.8.5.2
The number of bad DNS requests which are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vrrpStatInAdvers 1.3.6.1.4.1.1872.2.1.8.9.1
The number of good VRRP advertisements which are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vrrpStatOutAdvers 1.3.6.1.4.1.1872.2.1.8.9.2
The number of good VRRP advertisements which are transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vrrpStatOutBadAdvers 1.3.6.1.4.1.1872.2.1.8.9.3
The number of bad VRRP advertisements which are received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ipRouteInfoTable 1.3.6.1.4.1.1872.2.1.9.3.1
The table of run-time IP routes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRouteInfoEntry

ipRouteInfoEntry 1.3.6.1.4.1.1872.2.1.9.3.1.1
A row in the run-time IP route table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpRouteInfoEntry  

ipRouteInfoIndx 1.3.6.1.4.1.1872.2.1.9.3.1.1.1
The index of this route table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipRouteInfoDestIp 1.3.6.1.4.1.1872.2.1.9.3.1.1.2
The destination IP address of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipRouteInfoMask 1.3.6.1.4.1.1872.2.1.9.3.1.1.3
The destination IP mask of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipRouteInfoGateway 1.3.6.1.4.1.1872.2.1.9.3.1.1.4
The next-hop router address for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipRouteInfoTag 1.3.6.1.4.1.1872.2.1.9.3.1.1.5
The tag-type for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fixed(1), icmp(2), static(3), snmp(4), addr(5), rip(6), broadcast(7), martian(8), multicast(9), vip(10), bgp(11), none(12), ospf(13)  

ipRouteInfoType 1.3.6.1.4.1.1872.2.1.9.3.1.1.6
The type of the route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER indirect(1), direct(2), local(3), broadcast(4), martian(5), multicast(6), other(7)  

ipRouteInfoInterface 1.3.6.1.4.1.1872.2.1.9.3.1.1.7
The interface number for which the destination address is applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfCfg 1.3.6.1.4.1.1872.2.1.3.21
OBJECT IDENTIFIER    

ospfGeneral 1.3.6.1.4.1.1872.2.1.3.21.1
OBJECT IDENTIFIER    

ospfCurCfgDefaultRouteMetric 1.3.6.1.4.1.1872.2.1.3.21.1.1
Specify the metric to be assigned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfNewCfgDefaultRouteMetric 1.3.6.1.4.1.1872.2.1.3.21.1.2
Specify the metric to be assigned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfCurCfgDefaultRouteMetricType 1.3.6.1.4.1.1872.2.1.3.21.1.3
Specify the AS External metric type to be assigned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfNewCfgDefaultRouteMetricType 1.3.6.1.4.1.1872.2.1.3.21.1.4
Specify the AS External metric type to be assigned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfIntfTableMaxSize 1.3.6.1.4.1.1872.2.1.3.21.1.5
The maximum number of rows in the OSPF Interface table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfAreaTableMaxSize 1.3.6.1.4.1.1872.2.1.3.21.1.6
The maximum number of rows in the OSPF Area table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfRangeTableMaxSize 1.3.6.1.4.1.1872.2.1.3.21.1.7
The maximum number of rows in the OSPF Range table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfVirtIntfTableMaxSize 1.3.6.1.4.1.1872.2.1.3.21.1.8
The maximum number of rows in the OSPF Virtual Interface table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfHostTableMaxSize 1.3.6.1.4.1.1872.2.1.3.21.1.9
The maximum number of rows in the OSPF Host table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfCurCfgAreaTable 1.3.6.1.4.1.1872.2.1.3.21.2
The table of OSPF Area configuration in the current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfCurCfgAreaEntry

ospfCurCfgAreaEntry 1.3.6.1.4.1.1872.2.1.3.21.2.1
Information about a OSPF area.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfCurCfgAreaEntry  

ospfCurCfgAreaIndex 1.3.6.1.4.1.1872.2.1.3.21.2.1.1
The OSPF area number for which the OSPF area table is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

ospfCurCfgAreaId 1.3.6.1.4.1.1872.2.1.3.21.2.1.2
The IP Address of the OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfCurCfgAreaSpfInterval 1.3.6.1.4.1.1872.2.1.3.21.2.1.3
The SPF interval for the OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ospfCurCfgAreaAuthType 1.3.6.1.4.1.1872.2.1.3.21.2.1.4
Type of authentication being used. none(1) - no authentication password(2) - use password.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), password(2)  

ospfNewCfgAreaTable 1.3.6.1.4.1.1872.2.1.3.21.3
The table of OSPF Area configuration in the new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfNewCfgAreaEntry

ospfNewCfgAreaEntry 1.3.6.1.4.1.1872.2.1.3.21.3.1
Information about a OSPF area.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfNewCfgAreaEntry  

ospfNewCfgAreaIndex 1.3.6.1.4.1.1872.2.1.3.21.3.1.1
The OSPF area number for which the OSPF area table is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

ospfNewCfgAreaId 1.3.6.1.4.1.1872.2.1.3.21.3.1.2
The IP Address of the OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfNewCfgAreaSpfInterval 1.3.6.1.4.1.1872.2.1.3.21.3.1.3
The SPF interval for the OSPF area.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

ospfNewCfgAreaAuthType 1.3.6.1.4.1.1872.2.1.3.21.3.1.4
Type of authentication being used. none(1) - no authentication password(2) - use password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), password(2)  

ospfGeneralStats 1.3.6.1.4.1.1872.2.1.8.22.1
OBJECT IDENTIFIER    

ospfCumRxTxStats 1.3.6.1.4.1.1872.2.1.8.22.1.1
OBJECT IDENTIFIER    

ospfCumNbrChangeStats 1.3.6.1.4.1.1872.2.1.8.22.1.2
OBJECT IDENTIFIER    

ospfCumIntfChangeStats 1.3.6.1.4.1.1872.2.1.8.22.1.3
OBJECT IDENTIFIER    

ospfTimersKickOffStats 1.3.6.1.4.1.1872.2.1.8.22.1.4
OBJECT IDENTIFIER    

ospfArea 1.3.6.1.4.1.1872.2.1.8.22.2
OBJECT IDENTIFIER    

ospfAreaRxTxStats 1.3.6.1.4.1.1872.2.1.8.22.2.1
The table of OSPF Area Rx/Tx Statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaRxTxStatsEntry

ospfAreaRxTxStatsEntry 1.3.6.1.4.1.1872.2.1.8.22.2.1.1
Rx Tx packet Statistics about a OSPF area.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfAreaRxTxStatsEntry  

ospfAreaRxTxIndex 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.1
The index of the ospf Area for which these statistics apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfAreaRxPkts 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.2
The total number of OSPF packets received in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaTxPkts 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.3
The total number of OSPF packets transmitted in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaRxHello 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.4
The total number of Hello packets received in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaTxHello 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.5
The total number of Hello packets transmitted in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaRxDatabase 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.6
The total number of Database Description packets transmitted for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaTxDatabase 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.7
The total number of Database Description packets transmitted for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaRxlsReqs 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.8
The total number of Link State Request packets received for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaTxlsReqs 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.9
The total number of Link State Request packets transmitted for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaRxlsAcks 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.10
The total number of Link State Acknowledgement packets received for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaTxlsAcks 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.11
The total number of Link State Acknowledgement packets transmitted for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaRxlsUpdates 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.12
The total number of Link State Update packets received for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaTxlsUpdates 1.3.6.1.4.1.1872.2.1.8.22.2.1.1.13
The total number of Link State Update packets transmitted for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrChangeStats 1.3.6.1.4.1.1872.2.1.8.22.2.2
The table of OSPF Area Neighbour Statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaNbrChangeStatsEntry

ospfAreaNbrChangeStatsEntry 1.3.6.1.4.1.1872.2.1.8.22.2.2.1
Area Neighbour Change Statistics about a OSPF area.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfAreaNbrChangeStatsEntry  

ospfAreaNbrIndex 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.1
The index of the ospf Area for which these statistics apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfAreaNbrhello 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.2
The total number of Hello packets received from neighbours in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrStart 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.3
The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrAdjointOk 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.4
The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrNegotiationDone 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.5
The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrExchangeDone 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.6
The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrBadRequests 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.7
The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrBadSequence 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.8
The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrLoadingDone 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.9
The total number of link state updates received for all out-of-date portions of the database in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrN1way 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.10
The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrRstAd 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.11
The total number of times the Neighbour adjacency has been reset across this OPSF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaNbrDown 1.3.6.1.4.1.1872.2.1.8.22.2.2.1.12
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaChangeStats 1.3.6.1.4.1.1872.2.1.8.22.2.3
The table of OSPF Area Change Statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaChangeStatsEntry

ospfAreaChangeStatsEntry 1.3.6.1.4.1.1872.2.1.8.22.2.3.1
Area Change Statistics about a OSPF area.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfAreaChangeStatsEntry  

ospfAreaIntfIndex 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.1
The index of the OSPF Area for which these statistics apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfAreaIntfHello 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.2
The total number of Hello packets sent on this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaIntfDown 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.3
The total number of interfaces down in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaIntfLoop 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.4
The total number of interfaces no longer connected to the attatched network in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaIntfUnloop 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.5
The total number of interfaces connected to the attatched network in this OSPF area..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaIntfWaitTimer 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.6
The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaIntfBackup 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.7
The total number of Backup Designated Routers on the attatched network for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfAreaIntfNbrChange 1.3.6.1.4.1.1872.2.1.8.22.2.3.1.8
The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfInterface 1.3.6.1.4.1.1872.2.1.8.22.3
OBJECT IDENTIFIER    

ospfIntfRxTxStats 1.3.6.1.4.1.1872.2.1.8.22.3.1
The table of OSPF Interface Rx/Tx packet Statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfRxTxStatsEntry

ospfIntfRxTxStatsEntry 1.3.6.1.4.1.1872.2.1.8.22.3.1.1
OSPF interface Rx/Tx packet statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfIntfRxTxStatsEntry  

ospfIntfRxTxIndex 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.1
The OSPF interface for which these statistics apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfIntfRxPkts 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.2
The total number of OSPF packets received for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfTxPkts 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.3
The total number of OSPF packets transmitted for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfRxHello 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.4
The total number of Hello packets received for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfTxHello 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.5
The total number of Hello packets transmitted for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfRxDatabase 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.6
The total number of Database Description packets received for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfTxDatabase 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.7
The total number of Database Description packets transmitted for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfRxlsReqs 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.8
The total number of Link State Request packets received for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfTxlsReqs 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.9
The total number of Link State Request packets transmitted for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfRxlsAcks 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.10
The total number of Link State Acknowledgement packets received for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfTxlsAcks 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.11
The total number of Link State Acknowledgement packets transmitted for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfRxlsUpdates 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.12
The total number of Link State Update packets received for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfTxlsUpdates 1.3.6.1.4.1.1872.2.1.8.22.3.1.1.13
The total number of Link State Update packets transmitted for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrChangeStats 1.3.6.1.4.1.1872.2.1.8.22.3.2
The table of OSPF Interface Neighbour change Statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfNbrChangeStatsEntry

ospfIntfNbrChangeStatsEntry 1.3.6.1.4.1.1872.2.1.8.22.3.2.1
OSPF interface Neighbour Change statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfIntfNbrChangeStatsEntry  

ospfIntfNbrIndex 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.1
The index of the OSPF Interface for which these statistics apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfIntfNbrhello 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.2
The total number of Hello packets received from neighbours in this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrStart 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.3
The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrAdjointOk 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.4
The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrNegotiationDone 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.5
The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrExchangeDone 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.6
The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrBadRequests 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.7
The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrBadSequence 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.8
The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrLoadingDone 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.9
The total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrN1way 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.10
The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrRstAd 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.11
The sum total number of times the Neighbour adjacency has been reset on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrDown 1.3.6.1.4.1.1872.2.1.8.22.3.2.1.12
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfChangeStats 1.3.6.1.4.1.1872.2.1.8.22.3.3
The table of OSPF Interface change Statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfChangeStatsEntry

ospfIntfChangeStatsEntry 1.3.6.1.4.1.1872.2.1.8.22.3.3.1
OSPF interface Change statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfIntfChangeStatsEntry  

ospfIntfIndex 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.1
The index of the OSPF Interface for which these statistics apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfIntfHello 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.2
The total number of Hello packets sent by this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfDown 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.3
The total number of times the interface was down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfLoop 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.4
The total number of times the interface was no longer connected to the attatched network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfUnloop 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.5
The total number of times the interface, connected back to the attatched network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfWaitTimer 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.6
The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfBackup 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.7
The total number of Backup Designated Routers on the attatched network for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfIntfNbrChange 1.3.6.1.4.1.1872.2.1.8.22.3.3.1.8
The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumRxPkts 1.3.6.1.4.1.1872.2.1.8.22.1.1.1
The sum total of all OSPF packets received on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumTxPkts 1.3.6.1.4.1.1872.2.1.8.22.1.1.2
The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumRxHello 1.3.6.1.4.1.1872.2.1.8.22.1.1.3
The sum total of all Hello packets received on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumTxHello 1.3.6.1.4.1.1872.2.1.8.22.1.1.4
The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumRxDatabase 1.3.6.1.4.1.1872.2.1.8.22.1.1.5
The sum total of all Database Description packets received on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumTxDatabase 1.3.6.1.4.1.1872.2.1.8.22.1.1.6
The sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumRxlsReqs 1.3.6.1.4.1.1872.2.1.8.22.1.1.7
The sum total of all Link State Request packets received on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumTxlsReqs 1.3.6.1.4.1.1872.2.1.8.22.1.1.8
The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumRxlsAcks 1.3.6.1.4.1.1872.2.1.8.22.1.1.9
The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumTxlsAcks 1.3.6.1.4.1.1872.2.1.8.22.1.1.10
The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumRxlsUpdates 1.3.6.1.4.1.1872.2.1.8.22.1.1.11
The sum total of all Link State Update packets received on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumTxlsUpdates 1.3.6.1.4.1.1872.2.1.8.22.1.1.12
The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrhello 1.3.6.1.4.1.1872.2.1.8.22.1.2.1
The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrStart 1.3.6.1.4.1.1872.2.1.8.22.1.2.2
The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrAdjointOk 1.3.6.1.4.1.1872.2.1.8.22.1.2.3
The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrNegotiationDone 1.3.6.1.4.1.1872.2.1.8.22.1.2.4
The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrExchangeDone 1.3.6.1.4.1.1872.2.1.8.22.1.2.5
The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrBadRequests 1.3.6.1.4.1.1872.2.1.8.22.1.2.6
The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrBadSequence 1.3.6.1.4.1.1872.2.1.8.22.1.2.7
The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrLoadingDone 1.3.6.1.4.1.1872.2.1.8.22.1.2.8
The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrN1way 1.3.6.1.4.1.1872.2.1.8.22.1.2.9
The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrRstAd 1.3.6.1.4.1.1872.2.1.8.22.1.2.10
The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumNbrDown 1.3.6.1.4.1.1872.2.1.8.22.1.2.11
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumIntfHello 1.3.6.1.4.1.1872.2.1.8.22.1.3.1
The sum total number of Hello packets sent on all interfaces and areas
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumIntfDown 1.3.6.1.4.1.1872.2.1.8.22.1.3.2
The sum total number of interfaces down in all OSPF areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumIntfLoop 1.3.6.1.4.1.1872.2.1.8.22.1.3.3
The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumIntfUnloop 1.3.6.1.4.1.1872.2.1.8.22.1.3.4
The sum total number of interfaces, connected to the attatched network in all OSPF areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumIntfWaitTimer 1.3.6.1.4.1.1872.2.1.8.22.1.3.5
The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumIntfBackup 1.3.6.1.4.1.1872.2.1.8.22.1.3.6
The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfCumIntfNbrChange 1.3.6.1.4.1.1872.2.1.8.22.1.3.7
The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfTmrsKckOffHello 1.3.6.1.4.1.1872.2.1.8.22.1.4.1
The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfTmrsKckOffRetransmit 1.3.6.1.4.1.1872.2.1.8.22.1.4.2
The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfTmrsKckOffLsaLock 1.3.6.1.4.1.1872.2.1.8.22.1.4.3
The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfTmrsKckOffLsaAck 1.3.6.1.4.1.1872.2.1.8.22.1.4.4
The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfTmrsKckOffDbage 1.3.6.1.4.1.1872.2.1.8.22.1.4.5
The total number of times the Dbage has been fired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfTmrsKckOffSummary 1.3.6.1.4.1.1872.2.1.8.22.1.4.6
The total number of times the Summary timer has been fired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfTmrsKckOffAseExport 1.3.6.1.4.1.1872.2.1.8.22.1.4.7
The total number of times the ASE Export timer has been fired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfGeneralInfo 1.3.6.1.4.1.1872.2.1.9.5.1
OBJECT IDENTIFIER    

ospfStartTime 1.3.6.1.4.1.1872.2.1.9.5.1.1
The time when ospf has been started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfProcessUptime 1.3.6.1.4.1.1872.2.1.9.5.1.2
The time since ospf has been started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ospfLsTypesSupported 1.3.6.1.4.1.1872.2.1.9.5.1.3
The Link State Types that are supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfIntfCountForRouter 1.3.6.1.4.1.1872.2.1.9.5.1.4
The number of interfaces for this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfVlinkCountForRouter 1.3.6.1.4.1.1872.2.1.9.5.1.5
The number of virtual links for this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfTotalNeighbours 1.3.6.1.4.1.1872.2.1.9.5.1.6
The total number of OSPF neighbours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfNbrInInitState 1.3.6.1.4.1.1872.2.1.9.5.1.7
The number of neighbours in the initial state of exchange.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfNbrInExchState 1.3.6.1.4.1.1872.2.1.9.5.1.8
The number of neighbours in the exchange state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfNbrInFullState 1.3.6.1.4.1.1872.2.1.9.5.1.9
The number of neighbours in the Full state of exchange.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfTotalAreas 1.3.6.1.4.1.1872.2.1.9.5.1.10
The Total number of areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfTotalTransitAreas 1.3.6.1.4.1.1872.2.1.9.5.1.11
The Total number of Transit areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfTotalNssaAreas 1.3.6.1.4.1.1872.2.1.9.5.1.12
The Total number of NSSA areas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfAreaInfoTable 1.3.6.1.4.1.1872.2.1.9.5.2
The table of OSPF Area information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaInfoEntry

ospfAreaInfoEntry 1.3.6.1.4.1.1872.2.1.9.5.2.1
Information about a OSPF area.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfAreaInfoEntry  

ospfAreaInfoIndex 1.3.6.1.4.1.1872.2.1.9.5.2.1.1
The OSPF area number for which the OSPF info table is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfTotalNumberOfInterfaces 1.3.6.1.4.1.1872.2.1.9.5.2.1.2
The total number of interfaces for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfNumberOfInterfacesUp 1.3.6.1.4.1.1872.2.1.9.5.2.1.3
The number of interfaces UP in area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfNumberOfLsdbEntries 1.3.6.1.4.1.1872.2.1.9.5.2.1.4
The number of Link State Database entries for this OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfAreaInfoId 1.3.6.1.4.1.1872.2.1.9.5.2.1.5
The IP address of the OSPF area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIntfInfoTable 1.3.6.1.4.1.1872.2.1.9.5.3
The table of OSPF Interface information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfInfoEntry

ospfIntfInfoEntry 1.3.6.1.4.1.1872.2.1.9.5.3.1
Information about a OSPF interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfIntfInfoEntry  

ospfIfInfoIndex 1.3.6.1.4.1.1872.2.1.9.5.3.1.1
The OSPF interface number for which the OSPF info table is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfIfDesignatedRouterIP 1.3.6.1.4.1.1872.2.1.9.5.3.1.2
The OSPF Designated Router ID (IP Address) for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfBackupDesignatedRouterIP 1.3.6.1.4.1.1872.2.1.9.5.3.1.3
The OSPF Backup Designated Router ID (IP Address) for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfWaitInterval 1.3.6.1.4.1.1872.2.1.9.5.3.1.4
The OSPF Wait interval for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfIfTotalNeighbours 1.3.6.1.4.1.1872.2.1.9.5.3.1.5
The Total number of neighbours for this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ospfIfInfoIpAddress 1.3.6.1.4.1.1872.2.1.9.5.3.1.6
The IP address of the OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfRouterLSAInfoTable 1.3.6.1.4.1.1872.2.1.9.5.4
The table of OSPF Router LSA information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfRouterLSAInfoEntry

ospfRouterLSAInfoEntry 1.3.6.1.4.1.1872.2.1.9.5.4.1
A row in the Router LSA Table indexed by area, routerlink and routerId.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OspfRouterLSAInfoEntry  

routerLSAAreaIndex 1.3.6.1.4.1.1872.2.1.9.5.4.1.1
The OSPF AreaID for which the OSPF Router LSA info table is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

routerLSALinkIndex 1.3.6.1.4.1.1872.2.1.9.5.4.1.2
The OSPF Link ID for which the OSPF Router LSA info table is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

routerLSAId 1.3.6.1.4.1.1872.2.1.9.5.4.1.3
The OSPF RouterID for which the OSPF Router LSA info table is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

routerLSALinkID 1.3.6.1.4.1.1872.2.1.9.5.4.1.4
Identifes the object that this router link connects to. Value depends on the link's type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

routerLSALinkData 1.3.6.1.4.1.1872.2.1.9.5.4.1.5
This value depends on the link's Type field. For connections to stub networks, Link Data specifies the network's IP address mask. For unnumbered point-to-point connections, it specifies the interface's MIB-II ifIndex value and the value of Link Data is redundant. For the other link types it specifies the router interface's IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

routerLSALinkIfIndex 1.3.6.1.4.1.1872.2.1.9.5.4.1.6
For unnumbered point-to-point connections, LinkIfIndex specifies the interface's MIB-II ifIndex value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

routerLSANoOfTOSMetrics 1.3.6.1.4.1.1872.2.1.9.5.4.1.7
The number of different TOS metrics given for this link, not counting the required link metric(referred to as the TOS 0 metric).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

routerLSANoOfTOSZeroMetrics 1.3.6.1.4.1.1872.2.1.9.5.4.1.8
The number of Zero TOS metrics given for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInfoTable 1.3.6.1.4.1.1872.2.1.9.3.2
The table of ARP entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgArpInfoEntry

arpInfoEntry 1.3.6.1.4.1.1872.2.1.9.3.2.1
A row in the ARP table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgArpInfoEntry  

arpInfoDestIp 1.3.6.1.4.1.1872.2.1.9.3.2.1.1
The destination IP address of the ARP entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

arpInfoMacAddr 1.3.6.1.4.1.1872.2.1.9.3.2.1.2
The MAC address for the ARP entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

arpInfoVLAN 1.3.6.1.4.1.1872.2.1.9.3.2.1.3
The VLAN identifier for the ARP entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInfoSrcPort 1.3.6.1.4.1.1872.2.1.9.3.2.1.4
The port number on which this entry's equivalence is effective.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInfoRefPorts 1.3.6.1.4.1.1872.2.1.9.3.2.1.5
The rference ports associated with this ARP entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInfoFlag 1.3.6.1.4.1.1872.2.1.9.3.2.1.6
The flag associated with this ARP entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clear(1), unresolved(2), permanent(3), indirect(4)  

vrrpInfoVirtRtrTable 1.3.6.1.4.1.1872.2.1.9.4.1
The table of VRRP virtual router run-time information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpInfoVirtRtrTableEntry

vrrpInfoVirtRtrTableEntry 1.3.6.1.4.1.1872.2.1.9.4.1.1
The run-time information about a VRRP virtual router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpInfoVirtRtrTableEntry  

vrrpInfoVirtRtrIndex 1.3.6.1.4.1.1872.2.1.9.4.1.1.1
The VRRP virtual router index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpInfoVirtRtrState 1.3.6.1.4.1.1872.2.1.9.4.1.1.2
The VRRP virtual router state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), master(2), backup(3)  

vrrpInfoVirtRtrOwnership 1.3.6.1.4.1.1872.2.1.9.4.1.1.3
The VRRP virtual router ownership status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER owner(1), renter(2)  

vrrpInfoVirtRtrServer 1.3.6.1.4.1.1872.2.1.9.4.1.1.4
The VRRP server state identifies virtual routers that support Layer 4 services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vrrpInfoVirtRtrProxy 1.3.6.1.4.1.1872.2.1.9.4.1.1.5
The VRRP proxy state identifies virtual proxy routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vrrpOperVirtRtrTable 1.3.6.1.4.1.1872.2.1.14.5.1
An entry in the table of virtual routers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpOperVirtRtrEntry

vrrpOperVirtRtrEntry 1.3.6.1.4.1.1872.2.1.14.5.1.1
A row in the vrrpOperVirtRtrTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrrpOperVirtRtrEntry  

vrrpOperVirtRtrIndex 1.3.6.1.4.1.1872.2.1.14.5.1.1.1
The index for the VRRP virtual router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vrrpOperVirtRtrBackup 1.3.6.1.4.1.1872.2.1.14.5.1.1.2
When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), backup(2)  

vrrpOperVirtRtrGroupBackup 1.3.6.1.4.1.1872.2.1.14.5.2
When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), backup(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor