ALTEON-PRIVATE-MIBS

File: ALTEON-PRIVATE-MIBS.mib (359965 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
SNMPv2-SMI

Imported symbols

enterprises mgmt NetworkAddress
IpAddress Counter Gauge
TimeTicks OBJECT-TYPE PhysAddress
DisplayString Counter64

Defined Types

AgCurCfgTrapHostEntry  
SEQUENCE    
  agCurCfgTrapHostIndx INTEGER
  agCurCfgTrapHostIpAddr IpAddress
  agCurCfgTrapHostCommString DisplayString

AgNewCfgTrapHostEntry  
SEQUENCE    
  agNewCfgTrapHostIndx INTEGER
  agNewCfgTrapHostIpAddr IpAddress
  agNewCfgTrapHostCommString DisplayString

AgPortCurCfgTableEntry  
SEQUENCE    
  agPortCurCfgIndx INTEGER
  agPortCurCfgPrefLink INTEGER
  agPortCurCfgBackLink INTEGER
  agPortCurCfgState INTEGER
  agPortCurCfgVlanTag INTEGER
  agPortCurCfgStp INTEGER
  agPortCurCfgRmon INTEGER
  agPortCurCfgPVID INTEGER
  agPortCurCfgFastEthAutoNeg INTEGER
  agPortCurCfgFastEthSpeed INTEGER
  agPortCurCfgFastEthMode INTEGER
  agPortCurCfgFastEthFctl INTEGER
  agPortCurCfgGigEthAutoNeg INTEGER
  agPortCurCfgGigEthFctl INTEGER
  agPortCurCfgPortName DisplayString
  agPortCurCfgBwmContract INTEGER
  agPortCurCfgDiscardNonIPs INTEGER

AgPortNewCfgTableEntry  
SEQUENCE    
  agPortNewCfgIndx INTEGER
  agPortNewCfgPrefLink INTEGER
  agPortNewCfgBackLink INTEGER
  agPortNewCfgState INTEGER
  agPortNewCfgVlanTag INTEGER
  agPortNewCfgStp INTEGER
  agPortNewCfgRmon INTEGER
  agPortNewCfgPVID INTEGER
  agPortNewCfgFastEthAutoNeg INTEGER
  agPortNewCfgFastEthSpeed INTEGER
  agPortNewCfgFastEthMode INTEGER
  agPortNewCfgFastEthFctl INTEGER
  agPortNewCfgGigEthAutoNeg INTEGER
  agPortNewCfgGigEthFctl INTEGER
  agPortNewCfgPortName DisplayString
  agPortNewCfgBwmContract INTEGER
  agPortNewCfgDiscardNonIPs INTEGER

IpCurCfgIntfEntry  
SEQUENCE    
  ipCurCfgIntfIndex INTEGER
  ipCurCfgIntfAddr IpAddress
  ipCurCfgIntfMask IpAddress
  ipCurCfgIntfBroadcast IpAddress
  ipCurCfgIntfVlan INTEGER
  ipCurCfgIntfState INTEGER

IpNewCfgIntfEntry  
SEQUENCE    
  ipNewCfgIntfIndex INTEGER
  ipNewCfgIntfAddr IpAddress
  ipNewCfgIntfMask IpAddress
  ipNewCfgIntfBroadcast IpAddress
  ipNewCfgIntfVlan INTEGER
  ipNewCfgIntfState INTEGER
  ipNewCfgIntfDelete INTEGER

IpCurCfgGwEntry  
SEQUENCE    
  ipCurCfgGwIndex INTEGER
  ipCurCfgGwAddr IpAddress
  ipCurCfgGwInterval INTEGER
  ipCurCfgGwRetry INTEGER
  ipCurCfgGwState INTEGER
  ipCurCfgGwArp INTEGER

IpNewCfgGwEntry  
SEQUENCE    
  ipNewCfgGwIndex INTEGER
  ipNewCfgGwAddr IpAddress
  ipNewCfgGwInterval INTEGER
  ipNewCfgGwRetry INTEGER
  ipNewCfgGwState INTEGER
  ipNewCfgGwDelete INTEGER
  ipNewCfgGwArp INTEGER

IpCurCfgStaticRouteEntry  
SEQUENCE    
  ipCurCfgStaticRouteIndx INTEGER
  ipCurCfgStaticRouteDestIp IpAddress
  ipCurCfgStaticRouteMask IpAddress
  ipCurCfgStaticRouteGateway IpAddress
  ipCurCfgStaticRouteInterface INTEGER

IpNewCfgStaticRouteEntry  
SEQUENCE    
  ipNewCfgStaticRouteIndx INTEGER
  ipNewCfgStaticRouteDestIp IpAddress
  ipNewCfgStaticRouteMask IpAddress
  ipNewCfgStaticRouteGateway IpAddress
  ipNewCfgStaticRouteAction INTEGER
  ipNewCfgStaticRouteInterface INTEGER

IpFwdCurCfgPortEntry  
SEQUENCE    
  ipFwdCurCfgPortIndex INTEGER
  ipFwdCurCfgPortState INTEGER

IpFwdNewCfgPortEntry  
SEQUENCE    
  ipFwdNewCfgPortIndex INTEGER
  ipFwdNewCfgPortState INTEGER

VlanCurCfgTableEntry  
SEQUENCE    
  vlanCurCfgVlanId INTEGER
  vlanCurCfgVlanName DisplayString
  vlanCurCfgPorts OCTET STRING
  vlanCurCfgState INTEGER
  vlanCurCfgJumbo INTEGER
  vlanCurCfgBwmContract INTEGER

VlanNewCfgTableEntry  
SEQUENCE    
  vlanNewCfgVlanId INTEGER
  vlanNewCfgVlanName DisplayString
  vlanNewCfgPorts OCTET STRING
  vlanNewCfgState INTEGER
  vlanNewCfgJumbo INTEGER
  vlanNewCfgAddPort INTEGER
  vlanNewCfgRemovePort INTEGER
  vlanNewCfgDelete INTEGER
  vlanNewCfgBwmContract INTEGER

SlbCurCfgRealServerEntry  
SEQUENCE    
  slbCurCfgRealServerIndex INTEGER
  slbCurCfgRealServerIpAddr IpAddress
  slbCurCfgRealServerWeight INTEGER
  slbCurCfgRealServerMaxConns INTEGER
  slbCurCfgRealServerTimeOut INTEGER
  slbCurCfgRealServerBackUp INTEGER
  slbCurCfgRealServerPingInterval INTEGER
  slbCurCfgRealServerFailRetry INTEGER
  slbCurCfgRealServerSuccRetry INTEGER
  slbCurCfgRealServerState INTEGER
  slbCurCfgRealServerType INTEGER
  slbCurCfgRealServerName DisplayString
  slbCurCfgRealServerUrlBmap OCTET STRING
  slbCurCfgRealServerCookie INTEGER
  slbCurCfgRealServerExcludeStr INTEGER
  slbCurCfgRealServerSubmac INTEGER

SlbNewCfgRealServerEntry  
SEQUENCE    
  slbNewCfgRealServerIndex INTEGER
  slbNewCfgRealServerIpAddr IpAddress
  slbNewCfgRealServerWeight INTEGER
  slbNewCfgRealServerMaxConns INTEGER
  slbNewCfgRealServerTimeOut INTEGER
  slbNewCfgRealServerBackUp INTEGER
  slbNewCfgRealServerPingInterval INTEGER
  slbNewCfgRealServerFailRetry INTEGER
  slbNewCfgRealServerSuccRetry INTEGER
  slbNewCfgRealServerState INTEGER
  slbNewCfgRealServerDelete INTEGER
  slbNewCfgRealServerType INTEGER
  slbNewCfgRealServerName DisplayString
  slbNewCfgRealServerUrlBmap OCTET STRING
  slbNewCfgRealServerAddUrl INTEGER
  slbNewCfgRealServerRemUrl INTEGER
  slbNewCfgRealServerCookie INTEGER
  slbNewCfgRealServerExcludeStr INTEGER
  slbNewCfgRealServerSubmac INTEGER

SlbCurCfgVirtualServerEntry  
SEQUENCE    
  slbCurCfgVirtServerIndex INTEGER
  slbCurCfgVirtServerIpAddress IpAddress
  slbCurCfgVirtServerLayer3Only INTEGER
  slbCurCfgVirtServerState INTEGER
  slbCurCfgVirtServerDname DisplayString
  slbCurCfgVirtServerCname DisplayString
  slbCurCfgVirtServerCoffset INTEGER
  slbCurCfgVirtServerClength INTEGER
  slbCurCfgVirtServerUriCookie INTEGER
  slbCurCfgVirtServerFtpParsing INTEGER
  slbCurCfgVirtServerUrlHashLen INTEGER
  slbCurCfgVirtServerHttpHdrName DisplayString
  slbCurCfgVirtServerBwmContract INTEGER

SlbNewCfgVirtualServerEntry  
SEQUENCE    
  slbNewCfgVirtServerIndex INTEGER
  slbNewCfgVirtServerIpAddress IpAddress
  slbNewCfgVirtServerLayer3Only INTEGER
  slbNewCfgVirtServerState INTEGER
  slbNewCfgVirtServerDelete INTEGER
  slbNewCfgVirtServerDname DisplayString
  slbNewCfgVirtServerCname DisplayString
  slbNewCfgVirtServerCoffset INTEGER
  slbNewCfgVirtServerClength INTEGER
  slbNewCfgVirtServerUriCookie INTEGER
  slbNewCfgVirtServerFtpParsing INTEGER
  slbNewCfgVirtServerUrlHashLen INTEGER
  slbNewCfgVirtServerHttpHdrName DisplayString
  slbNewCfgVirtServerBwmContract INTEGER

SlbCurCfgVirtServicesEntry  
SEQUENCE    
  slbCurCfgVirtServIndex INTEGER
  slbCurCfgVirtServiceIndex INTEGER
  slbCurCfgVirtServiceVirtPort INTEGER
  slbCurCfgVirtServiceRealGroup INTEGER
  slbCurCfgVirtServiceRealPort INTEGER
  slbCurCfgVirtServiceUDPBalance INTEGER
  slbCurCfgVirtServicePBind INTEGER
  slbCurCfgVirtServiceHname DisplayString
  slbCurCfgVirtServiceHttpSlb INTEGER
  slbCurCfgVirtServiceBwmContract INTEGER
  slbCurCfgVirtServiceDirServerRtn INTEGER

SlbNewCfgVirtServicesEntry  
SEQUENCE    
  slbNewCfgVirtServIndex INTEGER
  slbNewCfgVirtServiceIndex INTEGER
  slbNewCfgVirtServiceVirtPort INTEGER
  slbNewCfgVirtServiceRealGroup INTEGER
  slbNewCfgVirtServiceRealPort INTEGER
  slbNewCfgVirtServiceUDPBalance INTEGER
  slbNewCfgVirtServicePBind INTEGER
  slbNewCfgVirtServiceHname DisplayString
  slbNewCfgVirtServiceHttpSlb INTEGER
  slbNewCfgVirtServiceBwmContract INTEGER
  slbNewCfgVirtServiceDirServerRtn INTEGER
  slbNewCfgVirtServiceDelete INTEGER

SlbCurCfgGroupEntry  
SEQUENCE    
  slbCurCfgGroupIndex INTEGER
  slbCurCfgGroupRealServers OCTET STRING
  slbCurCfgGroupMetric INTEGER
  slbCurCfgGroupBackupServer INTEGER
  slbCurCfgGroupHealthCheckUrl DisplayString
  slbCurCfgGroupHealthCheckLayer INTEGER
  slbCurCfgGroupName DisplayString
  slbCurCfgGroupRealThreshold INTEGER
  slbCurCfgGroupBackupGroup INTEGER

SlbNewCfgGroupEntry  
SEQUENCE    
  slbNewCfgGroupIndex INTEGER
  slbNewCfgGroupRealServers OCTET STRING
  slbNewCfgGroupAddServer INTEGER
  slbNewCfgGroupRemoveServer INTEGER
  slbNewCfgGroupMetric INTEGER
  slbNewCfgGroupBackupServer INTEGER
  slbNewCfgGroupDelete INTEGER
  slbNewCfgGroupHealthCheckUrl DisplayString
  slbNewCfgGroupHealthCheckLayer INTEGER
  slbNewCfgGroupName DisplayString
  slbNewCfgGroupRealThreshold INTEGER
  slbNewCfgGroupBackupGroup INTEGER

SlbCurCfgPortEntry  
SEQUENCE    
  slbCurCfgPortIndex INTEGER
  slbCurCfgPortProxyIpAddr IpAddress
  slbCurCfgPortSlbPipState INTEGER
  slbCurCfgPortSlbState INTEGER
  slbCurCfgPortSlbHotStandby INTEGER
  slbCurCfgPortSlbInterSwitch INTEGER

SlbNewCfgPortEntry  
SEQUENCE    
  slbNewCfgPortIndex INTEGER
  slbNewCfgPortProxyIpAddr IpAddress
  slbNewCfgPortSlbPipState INTEGER
  slbNewCfgPortSlbState INTEGER
  slbNewCfgPortSlbHotStandby INTEGER
  slbNewCfgPortSlbInterSwitch INTEGER

SlbCurCfgPeerEntry  
SEQUENCE    
  slbCurCfgPeerIndex INTEGER
  slbCurCfgPeerIpAddr IpAddress
  slbCurCfgPeerState INTEGER

SlbNewCfgPeerEntry  
SEQUENCE    
  slbNewCfgPeerIndex INTEGER
  slbNewCfgPeerIpAddr IpAddress
  slbNewCfgPeerState INTEGER
  slbNewCfgPeerDelete INTEGER

SlbCurCfgFailOverTblEntry  
SEQUENCE    
  slbCurCfgFailOverIndex INTEGER
  slbCurCfgFailOverPrimaryIp IpAddress
  slbCurCfgFailOverSecondaryIp IpAddress
  slbCurCfgFailOverSilenceInterval INTEGER
  slbCurCfgFailOverState INTEGER
  slbCurCfgFailOverRouteSupply INTEGER

SlbNewCfgFailOverTblEntry  
SEQUENCE    
  slbNewCfgFailOverIndex INTEGER
  slbNewCfgFailOverPrimaryIp IpAddress
  slbNewCfgFailOverSecondaryIp IpAddress
  slbNewCfgFailOverSilenceInterval INTEGER
  slbNewCfgFailOverState INTEGER
  slbNewCfgFailOverRouteSupply INTEGER

SlbCurCfgUrlExpTableEntry  
SEQUENCE    
  slbCurCfgUrlExpIndex INTEGER
  slbCurCfgUrlExpression DisplayString

SlbNewCfgUrlExpTableEntry  
SEQUENCE    
  slbNewCfgUrlExpIndex INTEGER
  slbNewCfgUrlExpression DisplayString
  slbNewCfgUrlExpDelete INTEGER

SlbCurCfgUrlLbPathTableEntry  
SEQUENCE    
  slbCurCfgUrlLbPathIndex INTEGER
  slbCurCfgUrlLbPathString DisplayString

SlbNewCfgUrlLbPathTableEntry  
SEQUENCE    
  slbNewCfgUrlLbPathIndex INTEGER
  slbNewCfgUrlLbPathString DisplayString
  slbNewCfgUrlLbPathDelete INTEGER

TrunkGroupCurCfgTableEntry  
SEQUENCE    
  trunkGroupCurCfgIndex INTEGER
  trunkGroupCurCfgPorts OCTET STRING
  trunkGroupCurCfgState INTEGER
  trunkGroupCurCfgBwmContract INTEGER

TrunkGroupNewCfgTableEntry  
SEQUENCE    
  trunkGroupNewCfgIndex INTEGER
  trunkGroupNewCfgPorts OCTET STRING
  trunkGroupNewCfgAddPort INTEGER
  trunkGroupNewCfgRemovePort INTEGER
  trunkGroupNewCfgState INTEGER
  trunkGroupNewCfgDelete INTEGER
  trunkGroupNewCfgBwmContract INTEGER

FltCurCfgTableEntry  
SEQUENCE    
  fltCurCfgIndx INTEGER
  fltCurCfgSrcIp IpAddress
  fltCurCfgSrcIpMask IpAddress
  fltCurCfgDstIp IpAddress
  fltCurCfgDstIpMask IpAddress
  fltCurCfgProtocol INTEGER
  fltCurCfgRangeLowSrcPort INTEGER
  fltCurCfgRangeHighSrcPort INTEGER
  fltCurCfgRangeLowDstPort INTEGER
  fltCurCfgRangeHighDstPort INTEGER
  fltCurCfgAction INTEGER
  fltCurCfgRedirPort INTEGER
  fltCurCfgRedirGroup INTEGER
  fltCurCfgLog INTEGER
  fltCurCfgState INTEGER
  fltCurCfgNat INTEGER
  fltCurCfgCache INTEGER
  fltCurCfgInvert INTEGER
  fltCurCfgClientProxy INTEGER
  fltCurCfgTcpAck INTEGER
  fltCurCfgUrlRedir INTEGER
  fltCurCfgSrcMac PhysAddress
  fltCurCfgDstMac PhysAddress
  fltCurCfgFtpNatActive INTEGER
  fltCurCfgAclTcpUrg INTEGER
  fltCurCfgAclTcpAck INTEGER
  fltCurCfgAclTcpPsh INTEGER
  fltCurCfgAclTcpRst INTEGER
  fltCurCfgAclTcpSyn INTEGER
  fltCurCfgAclTcpFin INTEGER
  fltCurCfgAclIcmp INTEGER
  fltCurCfgAclIpOption INTEGER
  fltCurCfgBwmContract INTEGER
  fltCurCfgAclIpTos INTEGER
  fltCurCfgAclIpTosMask INTEGER
  fltCurCfgAclIpTosNew INTEGER
  fltCurCfgFwlb INTEGER

FltNewCfgTableEntry  
SEQUENCE    
  fltNewCfgIndx INTEGER
  fltNewCfgSrcIp IpAddress
  fltNewCfgSrcIpMask IpAddress
  fltNewCfgDstIp IpAddress
  fltNewCfgDstIpMask IpAddress
  fltNewCfgProtocol INTEGER
  fltNewCfgRangeLowSrcPort INTEGER
  fltNewCfgRangeHighSrcPort INTEGER
  fltNewCfgRangeLowDstPort INTEGER
  fltNewCfgRangeHighDstPort INTEGER
  fltNewCfgAction INTEGER
  fltNewCfgRedirPort INTEGER
  fltNewCfgRedirGroup INTEGER
  fltNewCfgLog INTEGER
  fltNewCfgState INTEGER
  fltNewCfgDelete INTEGER
  fltNewCfgNat INTEGER
  fltNewCfgCache INTEGER
  fltNewCfgInvert INTEGER
  fltNewCfgClientProxy INTEGER
  fltNewCfgTcpAck INTEGER
  fltNewCfgUrlRedir INTEGER
  fltNewCfgSrcMac PhysAddress
  fltNewCfgDstMac PhysAddress
  fltNewCfgFtpNatActive INTEGER
  fltNewCfgAclTcpUrg INTEGER
  fltNewCfgAclTcpAck INTEGER
  fltNewCfgAclTcpPsh INTEGER
  fltNewCfgAclTcpRst INTEGER
  fltNewCfgAclTcpSyn INTEGER
  fltNewCfgAclTcpFin INTEGER
  fltNewCfgAclIcmp INTEGER
  fltNewCfgAclIpOption INTEGER
  fltNewCfgBwmContract INTEGER
  fltNewCfgAclIpTos INTEGER
  fltNewCfgAclIpTosMask INTEGER
  fltNewCfgAclIpTosNew INTEGER
  fltNewCfgFwlb INTEGER

FltCurCfgPortTableEntry  
SEQUENCE    
  fltCurCfgPortIndx INTEGER
  fltCurCfgPortState INTEGER
  fltCurCfgPortFiltBmap OCTET STRING

FltNewCfgPortTableEntry  
SEQUENCE    
  fltNewCfgPortIndx INTEGER
  fltNewCfgPortState INTEGER
  fltNewCfgPortFiltBmap OCTET STRING
  fltNewCfgPortAddFiltRule INTEGER
  fltNewCfgPortRemFiltRule INTEGER

GslbCurCfgNetworkTableEntry  
SEQUENCE    
  gslbCurCfgNetworkIndx INTEGER
  gslbCurCfgNetworkSourceIp IpAddress
  gslbCurCfgNetworkNetMask IpAddress
  gslbCurCfgNetworkVip1 IpAddress
  gslbCurCfgNetworkVip2 IpAddress

GslbNewCfgNetworkTableEntry  
SEQUENCE    
  gslbNewCfgNetworkIndx INTEGER
  gslbNewCfgNetworkSourceIp IpAddress
  gslbNewCfgNetworkNetMask IpAddress
  gslbNewCfgNetworkVip1 IpAddress
  gslbNewCfgNetworkVip2 IpAddress
  gslbNewCfgNetworkDelete INTEGER

GslbCurCfgRemSiteTableEntry  
SEQUENCE    
  gslbCurCfgRemSiteIndx INTEGER
  gslbCurCfgRemSitePrimaryIp IpAddress
  gslbCurCfgRemSiteSecondaryIp IpAddress
  gslbCurCfgRemSiteState INTEGER
  gslbCurCfgRemSiteUpdate INTEGER

GslbNewCfgRemSiteTableEntry  
SEQUENCE    
  gslbNewCfgRemSiteIndx INTEGER
  gslbNewCfgRemSitePrimaryIp IpAddress
  gslbNewCfgRemSiteSecondaryIp IpAddress
  gslbNewCfgRemSiteState INTEGER
  gslbNewCfgRemSiteUpdate INTEGER

VrrpCurCfgVirtRtrTableEntry  
SEQUENCE    
  vrrpCurCfgVirtRtrIndx INTEGER
  vrrpCurCfgVirtRtrID INTEGER
  vrrpCurCfgVirtRtrAddr IpAddress
  vrrpCurCfgVirtRtrIfIndex INTEGER
  vrrpCurCfgVirtRtrInterval INTEGER
  vrrpCurCfgVirtRtrPriority INTEGER
  vrrpCurCfgVirtRtrPreempt INTEGER
  vrrpCurCfgVirtRtrState INTEGER
  vrrpCurCfgVirtRtrSharing INTEGER
  vrrpCurCfgVirtRtrTckVirtRtr INTEGER
  vrrpCurCfgVirtRtrTckIpIntf INTEGER
  vrrpCurCfgVirtRtrTckVlanPort INTEGER
  vrrpCurCfgVirtRtrTckL4Port INTEGER
  vrrpCurCfgVirtRtrTckRServer INTEGER
  vrrpCurCfgVirtRtrTckHsrp INTEGER

VrrpNewCfgVirtRtrTableEntry  
SEQUENCE    
  vrrpNewCfgVirtRtrIndx INTEGER
  vrrpNewCfgVirtRtrID INTEGER
  vrrpNewCfgVirtRtrAddr IpAddress
  vrrpNewCfgVirtRtrIfIndex INTEGER
  vrrpNewCfgVirtRtrInterval INTEGER
  vrrpNewCfgVirtRtrPriority INTEGER
  vrrpNewCfgVirtRtrPreempt INTEGER
  vrrpNewCfgVirtRtrState INTEGER
  vrrpNewCfgVirtRtrDelete INTEGER
  vrrpNewCfgVirtRtrSharing INTEGER
  vrrpNewCfgVirtRtrTckVirtRtr INTEGER
  vrrpNewCfgVirtRtrTckIpIntf INTEGER
  vrrpNewCfgVirtRtrTckVlanPort INTEGER
  vrrpNewCfgVirtRtrTckL4Port INTEGER
  vrrpNewCfgVirtRtrTckRServer INTEGER
  vrrpNewCfgVirtRtrTckHsrp INTEGER

VrrpCurCfgIfTableEntry  
SEQUENCE    
  vrrpCurCfgIfIndx INTEGER
  vrrpCurCfgIfAuthType INTEGER
  vrrpCurCfgIfPasswd DisplayString

VrrpNewCfgIfTableEntry  
SEQUENCE    
  vrrpNewCfgIfIndx INTEGER
  vrrpNewCfgIfAuthType INTEGER
  vrrpNewCfgIfPasswd DisplayString
  vrrpNewCfgIfDelete INTEGER

VrrpCurCfgVirtRtrGrpTableEntry  
SEQUENCE    
  vrrpCurCfgVirtRtrGrpIndx INTEGER
  vrrpCurCfgVirtRtrGrpID INTEGER
  vrrpCurCfgVirtRtrGrpIfIndex INTEGER
  vrrpCurCfgVirtRtrGrpInterval INTEGER
  vrrpCurCfgVirtRtrGrpPriority INTEGER
  vrrpCurCfgVirtRtrGrpPreempt INTEGER
  vrrpCurCfgVirtRtrGrpState INTEGER
  vrrpCurCfgVirtRtrGrpSharing INTEGER
  vrrpCurCfgVirtRtrGrpTckVirtRtr INTEGER
  vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER
  vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER
  vrrpCurCfgVirtRtrGrpTckL4Port INTEGER
  vrrpCurCfgVirtRtrGrpTckRServer INTEGER
  vrrpCurCfgVirtRtrGrpTckHsrp INTEGER

VrrpNewCfgVirtRtrGrpTableEntry  
SEQUENCE    
  vrrpNewCfgVirtRtrGrpIndx INTEGER
  vrrpNewCfgVirtRtrGrpID INTEGER
  vrrpNewCfgVirtRtrGrpIfIndex INTEGER
  vrrpNewCfgVirtRtrGrpInterval INTEGER
  vrrpNewCfgVirtRtrGrpPriority INTEGER
  vrrpNewCfgVirtRtrGrpPreempt INTEGER
  vrrpNewCfgVirtRtrGrpState INTEGER
  vrrpNewCfgVirtRtrGrpDelete INTEGER
  vrrpNewCfgVirtRtrGrpSharing INTEGER
  vrrpNewCfgVirtRtrGrpTckVirtRtr INTEGER
  vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER
  vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER
  vrrpNewCfgVirtRtrGrpTckL4Port INTEGER
  vrrpNewCfgVirtRtrGrpTckRServer INTEGER
  vrrpNewCfgVirtRtrGrpTckHsrp INTEGER

SlbStatPortMaintEntry  
SEQUENCE    
  slbStatPortMaintPortIndex INTEGER
  slbStatPortMaintCurBindings Gauge
  slbStatPortMaintBindingFails Counter
  slbStatPortMaintNonTcpFrames Counter
  slbStatPortMaintTcpFragments Counter
  slbStatPortMaintUdpDatagrams Counter
  slbStatPortMaintIncorrectVIPs Counter
  slbStatPortMaintIncorrectVports Counter
  slbStatPortMaintRealServerNoAvails Counter
  slbStatPortMaintFilteredDeniedFrames Counter

SlbStatPortRealServerEntry  
SEQUENCE    
  slbStatPortRealServerPortIndex INTEGER
  slbStatPortRealServerServerIndex INTEGER
  slbStatPortRealServerCurrSessions Gauge
  slbStatPortRealServerTotalSessions Counter
  slbStatPortRealServerHCOctets Counter64
  slbStatPortRealServerHCOctetsLow32 Counter
  slbStatPortRealServerHCOctetsHigh32 Counter

SlbStatRServerEntry  
SEQUENCE    
  slbStatRServerIndex INTEGER
  slbStatRServerCurrSessions Gauge
  slbStatRServerTotalSessions Counter
  slbStatRServerFailures Counter
  slbStatRServerHighestSessions Counter
  slbStatRServerHCOctets Counter64
  slbStatRServerHCOctetsLow32 Counter
  slbStatRServerHCOctetsHigh32 Counter

SlbStatGroupEntry  
SEQUENCE    
  slbStatGroupIndex INTEGER
  slbStatGroupCurrSessions Gauge
  slbStatGroupTotalSessions Counter
  slbStatGroupHighestSessions Counter
  slbStatGroupHCOctets Counter64
  slbStatGroupHCOctetsLow32 Counter
  slbStatGroupHCOctetsHigh32 Counter

SlbStatVServerEntry  
SEQUENCE    
  slbStatVServerIndex INTEGER
  slbStatVServerCurrSessions Gauge
  slbStatVServerTotalSessions Counter
  slbStatVServerHighestSessions Counter
  slbStatVServerHCOctets Counter64
  slbStatVServerHCOctetsLow32 Counter
  slbStatVServerHCOctetsHigh32 Counter
  slbStatVServerHeaderHits Counter
  slbStatVServerHeaderMisses Counter
  slbStatVServerHeaderTotalSessions Counter

FltStatTableEntry  
SEQUENCE    
  fltStatFltIndex INTEGER
  fltStatFltFirings Counter

GslbStatRemRealServerEntry  
SEQUENCE    
  gslbStatRemRealServerIndex INTEGER
  gslbStatRemRealServerDnsHandoffs Counter
  gslbStatRemRealServerHttpRedirs Counter

UrlStatSlbPathTableEntry  
SEQUENCE    
  urlStatSlbPathIndex INTEGER
  urlStatSlbPathHits Counter

PortInfoTableEntry  
SEQUENCE    
  portInfoIndx INTEGER
  portInfoSpeed INTEGER
  portInfoMode INTEGER
  portInfoFlowCtrl INTEGER
  portInfoLink INTEGER

SlbFailOverInfoEntry  
SEQUENCE    
  slbFailOverInfoIndex INTEGER
  slbFailOverInfoPrimaryIp IpAddress
  slbFailOverInfoPrimaryStatus INTEGER
  slbFailOverInfoPrimaryState INTEGER
  slbFailOverInfoSecondaryIp IpAddress
  slbFailOverInfoSecondaryStatus INTEGER
  slbFailOverInfoSecondaryState INTEGER

SlbRealServerInfoEntry  
SEQUENCE    
  slbRealServerInfoIndex INTEGER
  slbRealServerInfoIpAddr IpAddress
  slbRealServerMacAddr PhysAddress
  slbRealServerInfoSwitchPort INTEGER
  slbRealServerInfoHealthLayer INTEGER
  slbRealServerInfoOverflow INTEGER
  slbRealServerInfoState INTEGER

IpRouteInfoEntry  
SEQUENCE    
  ipRouteInfoIndx INTEGER
  ipRouteInfoDestIp IpAddress
  ipRouteInfoMask IpAddress
  ipRouteInfoGateway IpAddress
  ipRouteInfoTag INTEGER
  ipRouteInfoType INTEGER
  ipRouteInfoInterface INTEGER

AgArpInfoEntry  
SEQUENCE    
  arpInfoDestIp IpAddress
  arpInfoMacAddr PhysAddress
  arpInfoVLAN INTEGER
  arpInfoSrcPort INTEGER
  arpInfoRefPorts INTEGER
  arpInfoFlag INTEGER

VrrpInfoVirtRtrTableEntry  
SEQUENCE    
  vrrpInfoVirtRtrIndex INTEGER
  vrrpInfoVirtRtrState INTEGER

DynSLBRealServerEntry  
SEQUENCE    
  dynSLBRealServerIpAddr IpAddress
  dynSLBRealServerPortNum INTEGER
  dynSLBRealServerWeight INTEGER

OperSlbPortEntry  
SEQUENCE    
  operSlbPortIndex INTEGER
  operSlbPortClrSessionTab INTEGER

BwmCurCfgPolicyTableEntry  
SEQUENCE    
  bwmCurCfgPolicyIndx INTEGER
  bwmCurCfgPolicyTosIn INTEGER
  bwmCurCfgPolicyTosOut INTEGER
  bwmCurCfgPolicyHard DisplayString
  bwmCurCfgPolicySoft DisplayString
  bwmCurCfgPolicyResv DisplayString
  bwmCurCfgPolicyBuffer INTEGER

BwmNewCfgPolicyTableEntry  
SEQUENCE    
  bwmNewCfgPolicyIndx INTEGER
  bwmNewCfgPolicyTosIn INTEGER
  bwmNewCfgPolicyTosOut INTEGER
  bwmNewCfgPolicyHard DisplayString
  bwmNewCfgPolicySoft DisplayString
  bwmNewCfgPolicyResv DisplayString
  bwmNewCfgPolicyBuffer INTEGER

BwmContractCurCfgTableEntry  
SEQUENCE    
  bwmCurCfgContractIndx INTEGER
  bwmCurCfgContractName DisplayString
  bwmCurCfgContractState INTEGER
  bwmCurCfgContractPolicy INTEGER
  bwmCurCfgContractPrec INTEGER
  bwmCurCfgContractUseTos INTEGER
  bwmCurCfgContractHistory INTEGER

BwmContractNewCfgTableEntry  
SEQUENCE    
  bwmNewCfgContractIndx INTEGER
  bwmNewCfgContractName DisplayString
  bwmNewCfgContractState INTEGER
  bwmNewCfgContractPolicy INTEGER
  bwmNewCfgContractDelete INTEGER
  bwmNewCfgContractPrec INTEGER
  bwmNewCfgContractUseTos INTEGER
  bwmNewCfgContractHistory INTEGER

BwmStatTcEntry  
SEQUENCE    
  bwmStatTcContractIndex INTEGER
  bwmStatTcName DisplayString
  bwmStatTcOutoct Counter
  bwmStatTcOutdisoct Counter
  bwmStatTcBufferUsed Counter
  bwmStatTcBufferMax Counter

BwmStatTcrEntry  
SEQUENCE    
  bwmStatTcrContractIndex INTEGER
  bwmStatTcrName DisplayString
  bwmStatTcrRate INTEGER
  bwmStatTcrOutoct Counter
  bwmStatTcrOutdisoct Counter
  bwmStatTcrBufferUsed Counter
  bwmStatTcrBufferMax Counter

BwmStatSpTcEntry  
SEQUENCE    
  bwmStatSpTcPortIndex INTEGER
  bwmStatSpTcContractIndex INTEGER
  bwmStatSpTcName DisplayString
  bwmStatSpTcOutoct Counter
  bwmStatSpTcOutdisoct Counter
  bwmStatSpTcBufferUsed Counter
  bwmStatSpTcBufferMax Counter

BwmStatSpTcrEntry  
SEQUENCE    
  bwmStatSpTcrPortIndex INTEGER
  bwmStatSpTcrContractIndex INTEGER
  bwmStatSpTcrName DisplayString
  bwmStatSpTcrRate INTEGER
  bwmStatSpTcrOutoct Counter
  bwmStatSpTcrOutdisoct Counter
  bwmStatSpTcrBufferUsed Counter
  bwmStatSpTcrBufferMax Counter

Defined Values

alteon 1.3.6.1.4.1.1872
OBJECT IDENTIFIER    

registration 1.3.6.1.4.1.1872.1
OBJECT IDENTIFIER    

private-mibs 1.3.6.1.4.1.1872.2
OBJECT IDENTIFIER    

switch 1.3.6.1.4.1.1872.2.1
OBJECT IDENTIFIER    

hardware 1.3.6.1.4.1.1872.2.1.1
OBJECT IDENTIFIER    

agent 1.3.6.1.4.1.1872.2.1.2
OBJECT IDENTIFIER    

iprouting 1.3.6.1.4.1.1872.2.1.3
OBJECT IDENTIFIER    

vlans 1.3.6.1.4.1.1872.2.1.4
OBJECT IDENTIFIER    

serverloadbalance 1.3.6.1.4.1.1872.2.1.5
OBJECT IDENTIFIER    

portmirroring 1.3.6.1.4.1.1872.2.1.6
OBJECT IDENTIFIER    

trunkgroup 1.3.6.1.4.1.1872.2.1.7
OBJECT IDENTIFIER    

stats 1.3.6.1.4.1.1872.2.1.8
OBJECT IDENTIFIER    

information 1.3.6.1.4.1.1872.2.1.9
OBJECT IDENTIFIER    

filtering 1.3.6.1.4.1.1872.2.1.10
OBJECT IDENTIFIER    

globalSLB 1.3.6.1.4.1.1872.2.1.11
OBJECT IDENTIFIER    

dynamicSLB 1.3.6.1.4.1.1872.2.1.12
OBJECT IDENTIFIER    

altswitchTraps 1.3.6.1.4.1.1872.2.1.13
OBJECT IDENTIFIER    

operCmds 1.3.6.1.4.1.1872.2.1.14
OBJECT IDENTIFIER    

vrrp 1.3.6.1.4.1.1872.2.1.15
OBJECT IDENTIFIER    

radius 1.3.6.1.4.1.1872.2.1.16
OBJECT IDENTIFIER    

bwm 1.3.6.1.4.1.1872.2.1.17
OBJECT IDENTIFIER    

agGeneral 1.3.6.1.4.1.1872.2.1.2.1
OBJECT IDENTIFIER    

agGeneralConfig 1.3.6.1.4.1.1872.2.1.2.2
OBJECT IDENTIFIER    

agPortConfig 1.3.6.1.4.1.1872.2.1.2.3
OBJECT IDENTIFIER    

slbfailover 1.3.6.1.4.1.1872.2.1.5.16
OBJECT IDENTIFIER    

slbUrl 1.3.6.1.4.1.1872.2.1.5.27
OBJECT IDENTIFIER    

slbUrlRedir 1.3.6.1.4.1.1872.2.1.5.27.1
OBJECT IDENTIFIER    

slbUrlBalance 1.3.6.1.4.1.1872.2.1.5.27.2
OBJECT IDENTIFIER    

gslbGeneral 1.3.6.1.4.1.1872.2.1.11.1
OBJECT IDENTIFIER    

gslbDNS 1.3.6.1.4.1.1872.2.1.11.2
OBJECT IDENTIFIER    

gslbSites 1.3.6.1.4.1.1872.2.1.11.3
OBJECT IDENTIFIER    

gslbLookup 1.3.6.1.4.1.1872.2.1.11.4
OBJECT IDENTIFIER    

ripStats 1.3.6.1.4.1.1872.2.1.8.1
OBJECT IDENTIFIER    

slbStats 1.3.6.1.4.1.1872.2.1.8.2
OBJECT IDENTIFIER    

arpStats 1.3.6.1.4.1.1872.2.1.8.3
OBJECT IDENTIFIER    

routeStats 1.3.6.1.4.1.1872.2.1.8.4
OBJECT IDENTIFIER    

dnsStats 1.3.6.1.4.1.1872.2.1.8.5
OBJECT IDENTIFIER    

filterStats 1.3.6.1.4.1.1872.2.1.8.6
OBJECT IDENTIFIER    

gslbStats 1.3.6.1.4.1.1872.2.1.8.7
OBJECT IDENTIFIER    

gslbMaintStats 1.3.6.1.4.1.1872.2.1.8.8
OBJECT IDENTIFIER    

vrrpStats 1.3.6.1.4.1.1872.2.1.8.9
OBJECT IDENTIFIER    

urlStats 1.3.6.1.4.1.1872.2.1.8.10
OBJECT IDENTIFIER    

tcpStats 1.3.6.1.4.1.1872.2.1.8.11
OBJECT IDENTIFIER    

memStats 1.3.6.1.4.1.1872.2.1.8.12
OBJECT IDENTIFIER    

pktStats 1.3.6.1.4.1.1872.2.1.8.13
OBJECT IDENTIFIER    

ftpStats 1.3.6.1.4.1.1872.2.1.8.14
OBJECT IDENTIFIER    

bwmStats 1.3.6.1.4.1.1872.2.1.8.15
OBJECT IDENTIFIER    

port-info 1.3.6.1.4.1.1872.2.1.9.1
OBJECT IDENTIFIER    

slb-info 1.3.6.1.4.1.1872.2.1.9.2
OBJECT IDENTIFIER    

ip-info 1.3.6.1.4.1.1872.2.1.9.3
OBJECT IDENTIFIER    

vrrp-info 1.3.6.1.4.1.1872.2.1.9.4
OBJECT IDENTIFIER    

hwPartNumber 1.3.6.1.4.1.1872.2.1.1.1
The hardware part number of the Alteon Switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

hwRevision 1.3.6.1.4.1.1872.2.1.1.2
The hardware revision. If the revision is not available, a zero length string should be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

hwPowerSupplyStatus 1.3.6.1.4.1.1872.2.1.1.3
The status of the internal power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), bad(2)  

hwRedundantPSPresent 1.3.6.1.4.1.1872.2.1.1.4
Existence of redundant power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notPresent(3), present(4)  

hwRedundantPSStatus 1.3.6.1.4.1.1872.2.1.1.5
The status of the redundant power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), bad(2), notPresent(3)  

hwSensor1Temp 1.3.6.1.4.1.1872.2.1.1.6
The temperature in degrees Celcius of the sensor number 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwSensor2Temp 1.3.6.1.4.1.1872.2.1.1.7
The temperature in degrees Celcius of the sensor number 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwSensor3Temp 1.3.6.1.4.1.1872.2.1.1.8
The temperature in degrees Celcius of the sensor number 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwSensor4Temp 1.3.6.1.4.1.1872.2.1.1.9
The temperature in degrees Celcius of the sensor number 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agSaveConfiguration 1.3.6.1.4.1.1872.2.1.2.1.1
This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), saveActive(2), notSaveActive(3)  

agApplyConfiguration 1.3.6.1.4.1.1872.2.1.2.1.2
This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), apply(2)  

agApplyPending 1.3.6.1.4.1.1872.2.1.2.1.3
This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), applyNeeded(2), noApplyNeeded(3)  

agReset 1.3.6.1.4.1.1872.2.1.2.1.4
This is an action object to reboot the agent. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), coldReset(2), warmReset(3)  

agConfigForNxtReset 1.3.6.1.4.1.1872.2.1.2.1.5
The configuration information to be loaded from at next reset. other(1)...unknown configuration (read-only) The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), active(2), backup(3), default(4)  

agImageForNxtReset 1.3.6.1.4.1.1872.2.1.2.1.6
The software image to be booted from at next reset. other(1)...unknown image (read-only) The following values are writable: image1(2)...image 1 image2(3)...image 2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), image1(2), image2(3)  

agSoftwareVersion 1.3.6.1.4.1.1872.2.1.2.1.7
The version of the software image that is currently running on the system in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

agBootVer 1.3.6.1.4.1.1872.2.1.2.1.8
The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

agImage1Ver 1.3.6.1.4.1.1872.2.1.2.1.9
The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agImage2Ver 1.3.6.1.4.1.1872.2.1.2.1.10
The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agRtcDate 1.3.6.1.4.1.1872.2.1.2.1.11
The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

agRtcTime 1.3.6.1.4.1.1872.2.1.2.1.12
The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if date is not available.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

agTftpServerIpAddr 1.3.6.1.4.1.1872.2.1.2.1.13
The TFTP server IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agTftpImageFileName 1.3.6.1.4.1.1872.2.1.2.1.14
The image file name to be downloaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpImage 1.3.6.1.4.1.1872.2.1.2.1.15
Whether the image file should be loaded in image1 or image2 in flash.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), image1(2), image2(3)  

agTftpDownload 1.3.6.1.4.1.1872.2.1.2.1.16
This is an action object to cause to download software image according to the setup of agTftpServerIpAddr, agTftpImageFileName, agTftpImage when download(2) is issued. other(1) is returned always when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), download(2)  

agLastSetErrorReason 1.3.6.1.4.1.1872.2.1.2.1.17
The error reason of the last SET failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

agTftpServer 1.3.6.1.4.1.1872.2.1.2.1.18
The TFTP server IP address or domain name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

agTftpCfgFileName 1.3.6.1.4.1.1872.2.1.2.1.19
The configuration file name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpDumpFileName 1.3.6.1.4.1.1872.2.1.2.1.20
The file name for core dump.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpAction 1.3.6.1.4.1.1872.2.1.2.1.21
This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5)- Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. other(1) is returned always when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), img-get(2), cfg-get(3), cfg-put(4), dump-put(5)  

agTftpLastActionStatus 1.3.6.1.4.1.1872.2.1.2.1.22
The recorded status of the previous TFTP activity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agEnabledSwFeatures 1.3.6.1.4.1.1872.2.1.2.1.25
The software features that are enabled on the switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agNewCfgSyslogHost 1.3.6.1.4.1.1872.2.1.2.2.1
The syslog host IP address, in the new_configuration block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslogHost 1.3.6.1.4.1.1872.2.1.2.2.2
The syslog host IP address, as currently configured in the current_configuration block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgBootp 1.3.6.1.4.1.1872.2.1.2.2.3
Enable or disable the use of BootP, in the new_configuration block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

agCurCfgBootp 1.3.6.1.4.1.1872.2.1.2.2.4
Enable or disable the use of BootP, as currently configured in the current_configuration block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

agNewCfgSpanningTree 1.3.6.1.4.1.1872.2.1.2.2.5
Turn On or Off Spanning Tree Protocol for the switch, in the new_configuration block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agCurCfgSpanningTree 1.3.6.1.4.1.1872.2.1.2.2.6
The state of Spanning Tree Protocol for the switch, as currently configured in the current_configuration block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agTrapHostTableMaxEnt 1.3.6.1.4.1.1872.2.1.2.2.7
The maximum number of rows in the trap host table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agCurCfgTrapHostTable 1.3.6.1.4.1.1872.2.1.2.2.8
The table of trap hosts which to send SNMP traps in the current_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgTrapHostEntry

agCurCfgTrapHostEntry 1.3.6.1.4.1.1872.2.1.2.2.8.1
A row in the trap host table in the current_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgCurCfgTrapHostEntry  

agCurCfgTrapHostIndx 1.3.6.1.4.1.1872.2.1.2.2.8.1.1
The index of the row in trap host table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

agCurCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.1.2.2.8.1.2
The IP address of a trap host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

agCurCfgTrapHostCommString 1.3.6.1.4.1.1872.2.1.2.2.8.1.3
The SNMP community string to use with the trap host
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

agNewCfgTrapHostTable 1.3.6.1.4.1.1872.2.1.2.2.9
The table of trap hosts which to send SNMP traps in the new_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgTrapHostEntry

agNewCfgTrapHostEntry 1.3.6.1.4.1.1872.2.1.2.2.9.1
A row in the trap host table in the new_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgNewCfgTrapHostEntry  

agNewCfgTrapHostIndx 1.3.6.1.4.1.1872.2.1.2.2.9.1.1
The index of the row in trap host table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

agNewCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.1.2.2.9.1.2
The IP address of a trap host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agNewCfgTrapHostCommString 1.3.6.1.4.1.1872.2.1.2.2.9.1.3
The SNMP community string to use with the trap host
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agCurCfgHttpServerPort 1.3.6.1.4.1.1872.2.1.2.2.10
The TCP port number that the HTTP server is listening to in the new_configuration block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agNewCfgHttpServerPort 1.3.6.1.4.1.1872.2.1.2.2.11
The TCP port number that the HTTP server is listening to in the new_configuration block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

agCurCfgLoginBanner 1.3.6.1.4.1.1872.2.1.2.2.12
The user defined login banner.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

agNewCfgLoginBanner 1.3.6.1.4.1.1872.2.1.2.2.13
The user defined login banner.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..79)  

agNewCfgSyslog2Host 1.3.6.1.4.1.1872.2.1.2.2.14
The second syslog host IP address, in the new_configuration block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslog2Host 1.3.6.1.4.1.1872.2.1.2.2.15
The second syslog host IP address, as currently configured in the current_configuration block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslogFac 1.3.6.1.4.1.1872.2.1.2.2.16
The facility of syslog host in the current_configuration block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agNewCfgSyslogFac 1.3.6.1.4.1.1872.2.1.2.2.17
The facility of syslog host in the new_configuration block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agCurCfgSyslog2Fac 1.3.6.1.4.1.1872.2.1.2.2.18
The facility of syslog2 host in the current_configuration block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agNewCfgSyslog2Fac 1.3.6.1.4.1.1872.2.1.2.2.19
The facility of syslogs host in the new_configuration block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agCurCfgSmtpHost 1.3.6.1.4.1.1872.2.1.2.2.20
The user defined SMTP host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

agNewCfgSmtpHost 1.3.6.1.4.1.1872.2.1.2.2.21
The user defined SMTP host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

agPortTableMaxEnt 1.3.6.1.4.1.1872.2.1.2.3.1
The maximum number of rows in the port configuration host table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agPortCurCfgTable 1.3.6.1.4.1.1872.2.1.2.3.2
The table of port configuration in the current_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgPortCurCfgTableEntry

agPortCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.2.3.2.1
A row in the port configuration table in the current_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgPortCurCfgTableEntry  

agPortCurCfgIndx 1.3.6.1.4.1.1872.2.1.2.3.2.1.1
The index of the row in port configurations table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  



agPortCurCfgState 1.3.6.1.4.1.1872.2.1.2.3.2.1.4
This is the state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

agPortCurCfgVlanTag 1.3.6.1.4.1.1872.2.1.2.3.2.1.5
This is VLAN tag state of the port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), tagged(2), untagged(3)  

agPortCurCfgStp 1.3.6.1.4.1.1872.2.1.2.3.2.1.6
This object is used to turn Spanning Tree on or off for the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortCurCfgRmon 1.3.6.1.4.1.1872.2.1.2.3.2.1.7
This object is used to turn RMON on or off on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortCurCfgPVID 1.3.6.1.4.1.1872.2.1.2.3.2.1.8
The default VLAN ID for the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agPortCurCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.2.1.9
This object is used to turn the autonegotiation on or off for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortCurCfgFastEthSpeed 1.3.6.1.4.1.1872.2.1.2.3.2.1.10
This object is used to select port speed for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), mbs10(2), mbs100(3), mbs10or100(4)  

agPortCurCfgFastEthMode 1.3.6.1.4.1.1872.2.1.2.3.2.1.11
This object is used to select port mode for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortCurCfgFastEthFctl 1.3.6.1.4.1.1872.2.1.2.3.2.1.12
This object is used to select port flow control for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), transmit(2), receive(3), both(4), none(5)  

agPortCurCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.2.1.13
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortCurCfgGigEthFctl 1.3.6.1.4.1.1872.2.1.2.3.2.1.14
This object is used to select port flow control for gigabit Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), transmit(2), receive(3), both(4), none(5)  

agPortCurCfgPortName 1.3.6.1.4.1.1872.2.1.2.3.2.1.15
The switch port name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

agPortCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.2.3.2.1.16
The switch port Bandwidth Management contract number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agPortCurCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.1.2.3.2.1.17
Enable or disable to discard all non-IP traffic on the switch port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

agPortNewCfgTable 1.3.6.1.4.1.1872.2.1.2.3.3
The table of port configuration in the new_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgPortNewCfgTableEntry

agPortNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.2.3.3.1
A row in the port configuration table in the new_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgPortNewCfgTableEntry  

agPortNewCfgIndx 1.3.6.1.4.1.1872.2.1.2.3.3.1.1
The index of the row in port configurations table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  



agPortNewCfgState 1.3.6.1.4.1.1872.2.1.2.3.3.1.4
This is the state of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

agPortNewCfgVlanTag 1.3.6.1.4.1.1872.2.1.2.3.3.1.5
This is VLAN tag state of the port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), tagged(2), untagged(3)  

agPortNewCfgStp 1.3.6.1.4.1.1872.2.1.2.3.3.1.6
This object is used to turn Spanning Tree on or off for the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortNewCfgRmon 1.3.6.1.4.1.1872.2.1.2.3.3.1.7
This object is used to turn RMON on or off on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortNewCfgPVID 1.3.6.1.4.1.1872.2.1.2.3.3.1.8
The default VLAN ID for the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

agPortNewCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.3.1.9
This object is used to turn the autonegotiation on or off for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortNewCfgFastEthSpeed 1.3.6.1.4.1.1872.2.1.2.3.3.1.10
This object is used to select port speed for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), mbs10(2), mbs100(3), mbs10or100(4)  

agPortNewCfgFastEthMode 1.3.6.1.4.1.1872.2.1.2.3.3.1.11
This object is used to select port mode for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortNewCfgFastEthFctl 1.3.6.1.4.1.1872.2.1.2.3.3.1.12
This object is used to select port flow control for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), transmit(2), receive(3), both(4), none(5)  

agPortNewCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.3.1.13
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

agPortNewCfgGigEthFctl 1.3.6.1.4.1.1872.2.1.2.3.3.1.14
This object is used to select port flow control for gigabit Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), transmit(2), receive(3), both(4), none(5)  

agPortNewCfgPortName 1.3.6.1.4.1.1872.2.1.2.3.3.1.15
The switch port name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

agPortNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.2.3.3.1.16
The switch port Bandwidth Management contract number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

agPortNewCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.1.2.3.3.1.17
Enable or disable to discard all non-IP traffic on the switch port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipInterfaceTableMax 1.3.6.1.4.1.1872.2.1.3.1
The maximum number of rows in the Ip interface table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipCurCfgIntfTable 1.3.6.1.4.1.1872.2.1.3.2
The table of IP interface configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgIntfEntry

ipCurCfgIntfEntry 1.3.6.1.4.1.1872.2.1.3.2.1
A row in the Ip interface table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpCurCfgIntfEntry  

ipCurCfgIntfIndex 1.3.6.1.4.1.1872.2.1.3.2.1.1
The interface number for which the IP information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

ipCurCfgIntfAddr 1.3.6.1.4.1.1872.2.1.3.2.1.2
The IP address of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfMask 1.3.6.1.4.1.1872.2.1.3.2.1.3
The subnet mask of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfBroadcast 1.3.6.1.4.1.1872.2.1.3.2.1.4
The broadcast address of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfVlan 1.3.6.1.4.1.1872.2.1.3.2.1.5
The VLAN associated with the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

ipCurCfgIntfState 1.3.6.1.4.1.1872.2.1.3.2.1.6
The state of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipNewCfgIntfTable 1.3.6.1.4.1.1872.2.1.3.3
The table of interface configuration in the New Configuration Block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgIntfEntry

ipNewCfgIntfEntry 1.3.6.1.4.1.1872.2.1.3.3.1
A row in the Ip interface table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpNewCfgIntfEntry  

ipNewCfgIntfIndex 1.3.6.1.4.1.1872.2.1.3.3.1.1
The interface number for which the IP information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

ipNewCfgIntfAddr 1.3.6.1.4.1.1872.2.1.3.3.1.2
The IP address of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfMask 1.3.6.1.4.1.1872.2.1.3.3.1.3
The subnet mask of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfBroadcast 1.3.6.1.4.1.1872.2.1.3.3.1.4
The broadcast address of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfVlan 1.3.6.1.4.1.1872.2.1.3.3.1.5
The VLAN associated with the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

ipNewCfgIntfState 1.3.6.1.4.1.1872.2.1.3.3.1.6
The state of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipNewCfgIntfDelete 1.3.6.1.4.1.1872.2.1.3.3.1.7
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipGatewayTableMax 1.3.6.1.4.1.1872.2.1.3.4
The maximum number of rows in the IP gateway table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipCurCfgGwTable 1.3.6.1.4.1.1872.2.1.3.5
The table of gateway configuration in the Current configuration Block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgGwEntry

ipCurCfgGwEntry 1.3.6.1.4.1.1872.2.1.3.5.1
A row in the Ip gateway table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpCurCfgGwEntry  

ipCurCfgGwIndex 1.3.6.1.4.1.1872.2.1.3.5.1.1
The gateway number for which the information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

ipCurCfgGwAddr 1.3.6.1.4.1.1872.2.1.3.5.1.2
The IP address of the default gateway.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgGwInterval 1.3.6.1.4.1.1872.2.1.3.5.1.3
The interval between ping attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..60  

ipCurCfgGwRetry 1.3.6.1.4.1.1872.2.1.3.5.1.4
The number of failed attempts to declare the default gateway DOWN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

ipCurCfgGwState 1.3.6.1.4.1.1872.2.1.3.5.1.5
The state of the default gateway.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipCurCfgGwArp 1.3.6.1.4.1.1872.2.1.3.5.1.6
The state of ARP only health checks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipNewCfgGwTable 1.3.6.1.4.1.1872.2.1.3.6
The table of default gateway configuration in the New Configuration Block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgGwEntry

ipNewCfgGwEntry 1.3.6.1.4.1.1872.2.1.3.6.1
A row in the Ip default gateway table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpNewCfgGwEntry  

ipNewCfgGwIndex 1.3.6.1.4.1.1872.2.1.3.6.1.1
The gateway number for which the information is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

ipNewCfgGwAddr 1.3.6.1.4.1.1872.2.1.3.6.1.2
The IP address of the default gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgGwInterval 1.3.6.1.4.1.1872.2.1.3.6.1.3
The interval in seconds between ping attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

ipNewCfgGwRetry 1.3.6.1.4.1.1872.2.1.3.6.1.4
The number of failed attempts to declare the default gateway DOWN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

ipNewCfgGwState 1.3.6.1.4.1.1872.2.1.3.6.1.5
The state of the default gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipNewCfgGwDelete 1.3.6.1.4.1.1872.2.1.3.6.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgGwArp 1.3.6.1.4.1.1872.2.1.3.6.1.7
The state of the ARP only health checks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipCurCfgStaticRouteTable 1.3.6.1.4.1.1872.2.1.3.7
The table of static routes in the current configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgStaticRouteEntry

ipCurCfgStaticRouteEntry 1.3.6.1.4.1.1872.2.1.3.7.1
A row in the static IP route table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpCurCfgStaticRouteEntry  

ipCurCfgStaticRouteIndx 1.3.6.1.4.1.1872.2.1.3.7.1.1
The index of the static routing table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

ipCurCfgStaticRouteDestIp 1.3.6.1.4.1.1872.2.1.3.7.1.2
The destination IP address of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteMask 1.3.6.1.4.1.1872.2.1.3.7.1.3
The destination IP address of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteGateway 1.3.6.1.4.1.1872.2.1.3.7.1.4
The destination IP address of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteInterface 1.3.6.1.4.1.1872.2.1.3.7.1.5
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipNewCfgStaticRouteTable 1.3.6.1.4.1.1872.2.1.3.8
The table of static routes in the new configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgStaticRouteEntry

ipNewCfgStaticRouteEntry 1.3.6.1.4.1.1872.2.1.3.8.1
A row in the static IP route table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpNewCfgStaticRouteEntry  

ipNewCfgStaticRouteIndx 1.3.6.1.4.1.1872.2.1.3.8.1.1
The index of the static routing table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

ipNewCfgStaticRouteDestIp 1.3.6.1.4.1.1872.2.1.3.8.1.2
The destination IP address of this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteMask 1.3.6.1.4.1.1872.2.1.3.8.1.3
The subnet mask of this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteGateway 1.3.6.1.4.1.1872.2.1.3.8.1.4
The IP address of the gateway for this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteAction 1.3.6.1.4.1.1872.2.1.3.8.1.5
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgStaticRouteInterface 1.3.6.1.4.1.1872.2.1.3.8.1.6
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipForward 1.3.6.1.4.1.1872.2.1.3.9
OBJECT IDENTIFIER    

ripConfig 1.3.6.1.4.1.1872.2.1.3.9.1
OBJECT IDENTIFIER    

ripCurCfgSupply 1.3.6.1.4.1.1872.2.1.3.9.1.1
Enable or disable supplying route updates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripNewCfgSupply 1.3.6.1.4.1.1872.2.1.3.9.1.2
Enable or disable supplying route updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripCurCfgListen 1.3.6.1.4.1.1872.2.1.3.9.1.3
Enable or disable listening to route updates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripNewCfgListen 1.3.6.1.4.1.1872.2.1.3.9.1.4
Enable or disable listening to route updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripCurCfgDefListen 1.3.6.1.4.1.1872.2.1.3.9.1.5
Enable or disable listening to default routes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripNewCfgDefListen 1.3.6.1.4.1.1872.2.1.3.9.1.6
Enable or disable listening to default routes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripCurCfgStaticSupply 1.3.6.1.4.1.1872.2.1.3.9.1.7
Enable or disable supplying static route updates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripNewCfgStaticSupply 1.3.6.1.4.1.1872.2.1.3.9.1.8
Enable or disable supplying static route updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripCurCfgUpdatePeriod 1.3.6.1.4.1.1872.2.1.3.9.1.9
Update Period in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

ripNewCfgUpdatePeriod 1.3.6.1.4.1.1872.2.1.3.9.1.10
Update period in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

ripCurCfgState 1.3.6.1.4.1.1872.2.1.3.9.1.11
RIP global state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

ripNewCfgState 1.3.6.1.4.1.1872.2.1.3.9.1.12
Globally turn RIP on or off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

ripCurCfgPoisonReverse 1.3.6.1.4.1.1872.2.1.3.9.1.13
RIP poison reverse.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ripNewCfgPoisonReverse 1.3.6.1.4.1.1872.2.1.3.9.1.14
RIP poison reverse.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipFwdCurCfgPortTable 1.3.6.1.4.1.1872.2.1.3.9.2
The table of ports and their forwarding states
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFwdCurCfgPortEntry

ipFwdCurCfgPortEntry 1.3.6.1.4.1.1872.2.1.3.9.2.1
A row in the ipFwdCurCfgPortTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFwdCurCfgPortEntry  

ipFwdCurCfgPortIndex 1.3.6.1.4.1.1872.2.1.3.9.2.1.1
The port number for which the forwarding state information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFwdCurCfgPortState 1.3.6.1.4.1.1872.2.1.3.9.2.1.2
The forwarding state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipFwdNewCfgPortTable 1.3.6.1.4.1.1872.2.1.3.9.3
The table of ports and their forwarding states
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFwdNewCfgPortEntry

ipFwdNewCfgPortEntry 1.3.6.1.4.1.1872.2.1.3.9.3.1
A row in the ipFwdNewCfgPortTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFwdNewCfgPortEntry  

ipFwdNewCfgPortIndex 1.3.6.1.4.1.1872.2.1.3.9.3.1.1
The port number for which the forwarding state information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFwdNewCfgPortState 1.3.6.1.4.1.1872.2.1.3.9.3.1.2
The forwarding state of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

ipFwdCurCfgLocalSubnet 1.3.6.1.4.1.1872.2.1.3.9.4
The current local IP subnet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipFwdNewCfgLocalSubnet 1.3.6.1.4.1.1872.2.1.3.9.5
The new local IP subnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFwdCurCfgLocalMask 1.3.6.1.4.1.1872.2.1.3.9.6
The current local IP subnet mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipFwdNewCfgLocalMask 1.3.6.1.4.1.1872.2.1.3.9.7
The new local IP subnet mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipFwdCurCfgState 1.3.6.1.4.1.1872.2.1.3.9.8
IP forwarding global state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

ipFwdNewCfgState 1.3.6.1.4.1.1872.2.1.3.9.9
IP forwarding global state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), on(2), off(3)  

ipFwdCurCfgDirectedBcast 1.3.6.1.4.1.1872.2.1.3.9.10
Enable or disable forwarding directed broadcasts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipFwdNewCfgDirectedBcast 1.3.6.1.4.1.1872.2.1.3.9.11
Enable or disable forwarding directed broadcasts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

arpCurCfgReARPPeriod 1.3.6.1.4.1.1872.2.1.3.10
Re-ARP Period in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpNewCfgReARPPeriod 1.3.6.1.4.1.1872.2.1.3.11
Re-ARP Period in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipCurCfgGwMetric 1.3.6.1.4.1.1872.2.1.3.12
The default gateway metric.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2)  

ipNewCfgGwMetric 1.3.6.1.4.1.1872.2.1.3.13
The default gateway metric.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2)  

vlanMaxEnt 1.3.6.1.4.1.1872.2.1.4.1
The maximum number of rows in the VLAN configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanCurCfgTable 1.3.6.1.4.1.1872.2.1.4.2
The table of VLAN configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanCurCfgTableEntry

vlanCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.4.2.1
A row in the VLAN configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VlanCurCfgTableEntry  

vlanCurCfgVlanId 1.3.6.1.4.1.1872.2.1.4.2.1.1
The VLAN identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

vlanCurCfgVlanName 1.3.6.1.4.1.1872.2.1.4.2.1.2
The VLAN name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanCurCfgPorts 1.3.6.1.4.1.1872.2.1.4.2.1.3
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vlanCurCfgState 1.3.6.1.4.1.1872.2.1.4.2.1.4
Enable or disable a VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

vlanCurCfgJumbo 1.3.6.1.4.1.1872.2.1.4.2.1.5
Enable or Disable the Jumbo frame support for the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

vlanCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.4.2.1.6
Default contract number the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanNewCfgTable 1.3.6.1.4.1.1872.2.1.4.3
The table of VLAN configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanNewCfgTableEntry

vlanNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.4.3.1
A row in the VLAN configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VlanNewCfgTableEntry  

vlanNewCfgVlanId 1.3.6.1.4.1.1872.2.1.4.3.1.1
The VLAN identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

vlanNewCfgVlanName 1.3.6.1.4.1.1872.2.1.4.3.1.2
The VLAN name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanNewCfgPorts 1.3.6.1.4.1.1872.2.1.4.3.1.3
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vlanNewCfgState 1.3.6.1.4.1.1872.2.1.4.3.1.4
Enable or disable a VLAN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

vlanNewCfgJumbo 1.3.6.1.4.1.1872.2.1.4.3.1.5
Enable or Disable the Jumbo frame support for the VLAN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

vlanNewCfgAddPort 1.3.6.1.4.1.1872.2.1.4.3.1.6
The port to be added to the specified VLAN. A '0' value is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanNewCfgRemovePort 1.3.6.1.4.1.1872.2.1.4.3.1.7
The port to be removed from the specified VLAN. A '0' value is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanNewCfgDelete 1.3.6.1.4.1.1872.2.1.4.3.1.8
This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vlanNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.4.3.1.9
Default contract number for the VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbRealServerMaxSize 1.3.6.1.4.1.1872.2.1.5.1
The maximum number of entries in SLB RealServerTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgRealServerTable 1.3.6.1.4.1.1872.2.1.5.2
The table of Real Server configuration in the current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgRealServerEntry

slbCurCfgRealServerEntry 1.3.6.1.4.1.1872.2.1.5.2.1
Information about a particular Real Server configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgRealServerEntry  

slbCurCfgRealServerIndex 1.3.6.1.4.1.1872.2.1.5.2.1.1
The real server number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.1.5.2.1.2
IP address of the real server identified by the instance of slbRealServerIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgRealServerWeight 1.3.6.1.4.1.1872.2.1.5.2.1.3
The server weight.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

slbCurCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.1.5.2.1.4
The maximum number of connections that are allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..200000  

slbCurCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.1.5.2.1.5
The maximum number of minutes an inactive connection remains open.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..60  

slbCurCfgRealServerBackUp 1.3.6.1.4.1.1872.2.1.5.2.1.6
The backup server number for this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0)  

slbCurCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.1.5.2.1.7
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..60  

slbCurCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.1.5.2.1.8
The number of failed attempts to declare this server DOWN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

slbCurCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.1.5.2.1.9
The number of successful attempts to declare a server UP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

slbCurCfgRealServerState 1.3.6.1.4.1.1872.2.1.5.2.1.10
Enable or disable this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbCurCfgRealServerType 1.3.6.1.4.1.1872.2.1.5.2.1.11
The server type. It participates in global server load balancing when it is configured as remote-server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local-server(1), remote-server(2)  

slbCurCfgRealServerName 1.3.6.1.4.1.1872.2.1.5.2.1.12
The name of the real server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

slbCurCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.1.5.2.1.13
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbCurCfgRealServerCookie 1.3.6.1.4.1.1872.2.1.5.2.1.14
The real server that will handle client requests that don't contain an URL cookie if Cookie loadbalance is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.1.5.2.1.15
The real server will handle requests that don't match the loadbalance string if it is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerSubmac 1.3.6.1.4.1.1872.2.1.5.2.1.16
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerTable 1.3.6.1.4.1.1872.2.1.5.3
The table of Real Server configuration in the new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgRealServerEntry

slbNewCfgRealServerEntry 1.3.6.1.4.1.1872.2.1.5.3.1
Information about a particular Real Server configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgRealServerEntry  

slbNewCfgRealServerIndex 1.3.6.1.4.1.1872.2.1.5.3.1.1
The real server number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.1.5.3.1.2
IP address of the real server identified by the instance of slbRealServerIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbNewCfgRealServerWeight 1.3.6.1.4.1.1872.2.1.5.3.1.3
The server weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..48  

slbNewCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.1.5.3.1.4
The maximum number of connections that are allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200000  

slbNewCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.1.5.3.1.5
The maximum number of minutes an inactive connection remains open.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..60  

slbNewCfgRealServerBackUp 1.3.6.1.4.1.1872.2.1.5.3.1.6
The backup server number for this server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0)  

slbNewCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.1.5.3.1.7
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

slbNewCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.1.5.3.1.8
The number of failed attempts to declare this server DOWN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

slbNewCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.1.5.3.1.9
The number of successful attempts to declare a server UP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

slbNewCfgRealServerState 1.3.6.1.4.1.1872.2.1.5.3.1.10
Enable or disable this server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbNewCfgRealServerDelete 1.3.6.1.4.1.1872.2.1.5.3.1.11
By setting the value to delete(2), the entire row is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgRealServerType 1.3.6.1.4.1.1872.2.1.5.3.1.12
The server type. It participates in global server load balancing when it is configured as remote-server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local-server(1), remote-server(2)  

slbNewCfgRealServerName 1.3.6.1.4.1.1872.2.1.5.3.1.13
The name of the real server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

slbNewCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.1.5.3.1.14
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbNewCfgRealServerAddUrl 1.3.6.1.4.1.1872.2.1.5.3.1.15
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the real server. A zero is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgRealServerRemUrl 1.3.6.1.4.1.1872.2.1.5.3.1.16
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the real server. A zero is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgRealServerCookie 1.3.6.1.4.1.1872.2.1.5.3.1.17
Enable or disable real server to handle client requests that don't contain a cookie if cookie loadbalance is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.1.5.3.1.18
Enable or disable exclusionary matching string on real server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerSubmac 1.3.6.1.4.1.1872.2.1.5.3.1.19
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbVirtServerTableMaxSize 1.3.6.1.4.1.1872.2.1.5.4
The maximum number of entries in SLB VirtServerTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServerTable 1.3.6.1.4.1.1872.2.1.5.5
The table of virtual Servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtualServerEntry

slbCurCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.1.5.5.1
A row in the virtual server table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtualServerEntry  

slbCurCfgVirtServerIndex 1.3.6.1.4.1.1872.2.1.5.5.1.1
Virtual Server Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.1.5.5.1.2
IP address of the virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.1.5.5.1.3
Enable or disable layer3 only balancing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER layer3Only(1), disabled(2)  

slbCurCfgVirtServerState 1.3.6.1.4.1.1872.2.1.5.5.1.4
Enable or disable the virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbCurCfgVirtServerDname 1.3.6.1.4.1.1872.2.1.5.5.1.5
The domain name of the virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..34)  

slbCurCfgVirtServerCname 1.3.6.1.4.1.1872.2.1.5.5.1.6
The cookie name of the virtual server used for cookie load balance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

slbCurCfgVirtServerCoffset 1.3.6.1.4.1.1872.2.1.5.5.1.7
The starting byte offset of the cookie value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

slbCurCfgVirtServerClength 1.3.6.1.4.1.1872.2.1.5.5.1.8
The number of bytes to extract from the cookie value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

slbCurCfgVirtServerUriCookie 1.3.6.1.4.1.1872.2.1.5.5.1.9
Enable or disable cookie search in URI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServerFtpParsing 1.3.6.1.4.1.1872.2.1.5.5.1.10
Enable or Disable the ftp parsing for the virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServerUrlHashLen 1.3.6.1.4.1.1872.2.1.5.5.1.11
The number of bytes used to hash onto server, A zero means URL hashing disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

slbCurCfgVirtServerHttpHdrName 1.3.6.1.4.1.1872.2.1.5.5.1.12
The HTTP header name of the virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.1.5.5.1.13
The default BW contract of virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServerTable 1.3.6.1.4.1.1872.2.1.5.6
The table of virtual Servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtualServerEntry

slbNewCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.1.5.6.1
A row in the virtual server table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtualServerEntry  

slbNewCfgVirtServerIndex 1.3.6.1.4.1.1872.2.1.5.6.1.1
Virtual Server Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.1.5.6.1.2
IP address of the virtual server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbNewCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.1.5.6.1.3
Enable or disable layer3 only balancing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER layer3Only(1), disabled(2)  

slbNewCfgVirtServerState 1.3.6.1.4.1.1872.2.1.5.6.1.4
Enable or disable the virtual server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbNewCfgVirtServerDelete 1.3.6.1.4.1.1872.2.1.5.6.1.5
By setting the value to delete(2), the entire row is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgVirtServerDname 1.3.6.1.4.1.1872.2.1.5.6.1.6
The domain name of the virtual server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..34)  

slbNewCfgVirtServerCname 1.3.6.1.4.1.1872.2.1.5.6.1.7
The cookie name of the virtual server used for cookie load balance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

slbNewCfgVirtServerCoffset 1.3.6.1.4.1.1872.2.1.5.6.1.8
The starting byte offset of the cookie value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

slbNewCfgVirtServerClength 1.3.6.1.4.1.1872.2.1.5.6.1.9
The number of bytes to extract from the cookie value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

slbNewCfgVirtServerUriCookie 1.3.6.1.4.1.1872.2.1.5.6.1.10
Enable or disable cookie search in URI
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServerFtpParsing 1.3.6.1.4.1.1872.2.1.5.6.1.11
Enable or Disable the ftp parsing for the virtual server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServerUrlHashLen 1.3.6.1.4.1.1872.2.1.5.6.1.12
The number of bytes used to hash onto server, A zero means URL hashing disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

slbNewCfgVirtServerHttpHdrName 1.3.6.1.4.1.1872.2.1.5.6.1.13
The HTTP header name of the virtual server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.1.5.6.1.14
The default BW contract number of the virtual server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServicesTable 1.3.6.1.4.1.1872.2.1.5.7
The table of virtual Services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtServicesEntry

slbCurCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.1.5.7.1
A row in the virtual services table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtServicesEntry  

slbCurCfgVirtServIndex 1.3.6.1.4.1.1872.2.1.5.7.1.1
The number of the virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.1.5.7.1.2
The service index. This has no external meaning
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.1.5.7.1.3
The layer4 virtual port number of the service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.1.5.7.1.4
The real server group number for this service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.1.5.7.1.5
The layer4 real port number of the service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.1.5.7.1.6
Enable, disable or stateless the UDP balancing for the virtual port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3), stateless(4)  

slbCurCfgVirtServicePBind 1.3.6.1.4.1.1872.2.1.5.7.1.7
Enable or disable persistent bindings for the virtual port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3), sessid(4), cookie(5)  

slbCurCfgVirtServiceHname 1.3.6.1.4.1.1872.2.1.5.7.1.8
The host name of the virtual service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

slbCurCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.1.5.7.1.9
Select HTTP server loadbalancing for the virtual port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7)  

slbCurCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.1.5.7.1.10
The BWM contract number for this service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.1.5.7.1.11
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServicesTable 1.3.6.1.4.1.1872.2.1.5.8
The table of virtual Services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtServicesEntry

slbNewCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.1.5.8.1
A row in the virtual services table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtServicesEntry  

slbNewCfgVirtServIndex 1.3.6.1.4.1.1872.2.1.5.8.1.1
The number of the virtual server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.1.5.8.1.2
The service index. This has no external meaning
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.1.5.8.1.3
The layer4 virtual port number of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.1.5.8.1.4
The real server group number for this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.1.5.8.1.5
The layer4 real port number of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.1.5.8.1.6
Enable, disable or stateless the UDP balancing for the virtual port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3), stateless(4)  

slbNewCfgVirtServicePBind 1.3.6.1.4.1.1872.2.1.5.8.1.7
Enable or disable persistent bindings for the virtual port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3), sessid(4), cookie(5)  

slbNewCfgVirtServiceHname 1.3.6.1.4.1.1872.2.1.5.8.1.8
The host name of the virtual service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

slbNewCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.1.5.8.1.9
Select HTTP server loadbalancing for the virtual port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7)  

slbNewCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.1.5.8.1.10
The BWM contract number for this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.1.5.8.1.11
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceDelete 1.3.6.1.4.1.1872.2.1.5.8.1.12
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbGroupTableMaxSize 1.3.6.1.4.1.1872.2.1.5.9
The maximum number of entries in slbCurCfgGroupTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgGroupTable 1.3.6.1.4.1.1872.2.1.5.10
The table of groups
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgGroupEntry

slbCurCfgGroupEntry 1.3.6.1.4.1.1872.2.1.5.10.1
A row in the slbCurCfgGroupTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgGroupEntry  

slbCurCfgGroupIndex 1.3.6.1.4.1.1872.2.1.5.10.1.1
The group number for which the information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgGroupRealServers 1.3.6.1.4.1.1872.2.1.5.10.1.2
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

slbCurCfgGroupMetric 1.3.6.1.4.1.1872.2.1.5.10.1.3
The metric used to select next server in group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER roundRobin(1), leastConnections(2), minMisses(3), hash(4)  

slbCurCfgGroupBackupServer 1.3.6.1.4.1.1872.2.1.5.10.1.4
The backup real server for this group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0)  

slbCurCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.1.5.10.1.5
The URL used to verify HTTP content availability for the real servers of this group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.1.5.10.1.6
The OSI layer at which servers are health checked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER icmp(1), tcp(2), http(3), dns(4), smtp(5), pop3(6), nntp(7), ftp(8), imap(9), radius(10), sslh(11), script1(12), script2(13), script3(14), script4(15), script5(16), script6(17), script7(18), script8(19)  

slbCurCfgGroupName 1.3.6.1.4.1.1872.2.1.5.10.1.7
The name of the real server group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

slbCurCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.1.5.10.1.8
The server failure syslog threshold of the real server group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

slbCurCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.1.5.10.1.9
The backup real server group for this group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0)  

slbNewCfgGroupTable 1.3.6.1.4.1.1872.2.1.5.11
The table of groups
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgGroupEntry

slbNewCfgGroupEntry 1.3.6.1.4.1.1872.2.1.5.11.1
A row in the slbNewCfgGroupTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgGroupEntry  

slbNewCfgGroupIndex 1.3.6.1.4.1.1872.2.1.5.11.1.1
The group number for which the information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgGroupRealServers 1.3.6.1.4.1.1872.2.1.5.11.1.2
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

slbNewCfgGroupAddServer 1.3.6.1.4.1.1872.2.1.5.11.1.3
The real server to be added to the group. When read, 0 is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgGroupRemoveServer 1.3.6.1.4.1.1872.2.1.5.11.1.4
The real server to be removed from the group. When read, 0 is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbNewCfgGroupMetric 1.3.6.1.4.1.1872.2.1.5.11.1.5
The metric used to select next server in group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER roundRobin(1), leastConnections(2), minMisses(3), hash(4)  

slbNewCfgGroupBackupServer 1.3.6.1.4.1.1872.2.1.5.11.1.6
The backup real server for this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0)  

slbNewCfgGroupDelete 1.3.6.1.4.1.1872.2.1.5.11.1.7
By setting the value to delete(2), the entire group is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.1.5.11.1.8
The URL for health check among the real servers of this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.1.5.11.1.9
The OSI layer at which servers are health checked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER icmp(1), tcp(2), http(3), dns(4), smtp(5), pop3(6), nntp(7), ftp(8), imap(9), radius(10), sslh(11), script1(12), script2(13), script3(14), script4(15), script5(16), script6(17), script7(18), script8(19)  

slbNewCfgGroupName 1.3.6.1.4.1.1872.2.1.5.11.1.10
The name of the real server group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

slbNewCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.1.5.11.1.11
The server failure syslog threshold of the real server group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

slbNewCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.1.5.11.1.12
The backup real server group for this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0)  

slbCurCfgPortTable 1.3.6.1.4.1.1872.2.1.5.12
The table of ports and their SLB states
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgPortEntry

slbCurCfgPortEntry 1.3.6.1.4.1.1872.2.1.5.12.1
A row in the slbPortTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgPortEntry  

slbCurCfgPortIndex 1.3.6.1.4.1.1872.2.1.5.12.1.1
The port number for which the SLB information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgPortProxyIpAddr 1.3.6.1.4.1.1872.2.1.5.12.1.2
The proxy IP address of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgPortSlbState 1.3.6.1.4.1.1872.2.1.5.12.1.3
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port FailOver(5) - SLB fail over port failOver-stanby(6) - SLB fail port operating as standby (a read-only state)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), client(2), server(3), client-server(4), failOver(5), failOver-stanby(6)  

slbCurCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.1.5.12.1.4
Enable or disable hot standby processing on the switch port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.1.5.12.1.5
Enable or disable inter-switch processing on the switch port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbPipState 1.3.6.1.4.1.1872.2.1.5.12.1.6
Enable or disable use of proxy IP address on the switch port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortTable 1.3.6.1.4.1.1872.2.1.5.13
The table of ports and their SLB states
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgPortEntry

slbNewCfgPortEntry 1.3.6.1.4.1.1872.2.1.5.13.1
A row in the slbPortTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgPortEntry  

slbNewCfgPortIndex 1.3.6.1.4.1.1872.2.1.5.13.1.1
The port number for which the SLB information pertains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgPortProxyIpAddr 1.3.6.1.4.1.1872.2.1.5.13.1.2
The proxy IP address of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbNewCfgPortSlbState 1.3.6.1.4.1.1872.2.1.5.13.1.3
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port FailOver(5) - SLB fail over port failOver-stanby(6) - SLB fail port operating as standby (a read-only state)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), client(2), server(3), client-server(4), failOver(5), failOver-stanby(6)  

slbNewCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.1.5.13.1.4
Enable or disable hot standby processing on the switch port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.1.5.13.1.5
Enable or disable inter-switch processing on the switch port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbPipState 1.3.6.1.4.1.1872.2.1.5.13.1.6
Enable or disable use of proxy IP address on the switch port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgImask 1.3.6.1.4.1.1872.2.1.5.14
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgImask 1.3.6.1.4.1.1872.2.1.5.15
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgMnet 1.3.6.1.4.1.1872.2.1.5.19
The management network - corresponding to the mnet command of the slb configuration menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgMnet 1.3.6.1.4.1.1872.2.1.5.20
The management network - corresponding to the mnet command of the slb configuration menu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgMmask 1.3.6.1.4.1.1872.2.1.5.21
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgMmask 1.3.6.1.4.1.1872.2.1.5.22
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.1.5.23
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.1.5.24
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgDirectMode 1.3.6.1.4.1.1872.2.1.5.25
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgDirectMode 1.3.6.1.4.1.1872.2.1.5.26
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPmask 1.3.6.1.4.1.1872.2.1.5.28
The persistent mask - corresponding to the pmask command of the slb configuration menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgPmask 1.3.6.1.4.1.1872.2.1.5.29
The persistent mask - corresponding to the pmask command of the slb configuration menu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgGrace 1.3.6.1.4.1.1872.2.1.5.30
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgGrace 1.3.6.1.4.1.1872.2.1.5.31
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPeerTable 1.3.6.1.4.1.1872.2.1.5.32
The table of Synch Peer Switch configuration in the current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgPeerEntry

slbCurCfgPeerEntry 1.3.6.1.4.1.1872.2.1.5.32.1
Information about Synch Peer Switch configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgPeerEntry  

slbCurCfgPeerIndex 1.3.6.1.4.1.1872.2.1.5.32.1.1
The index for synch peer switchs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgPeerIpAddr 1.3.6.1.4.1.1872.2.1.5.32.1.2
The IP address of the peer switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgPeerState 1.3.6.1.4.1.1872.2.1.5.32.1.3
Enable or disable the peer switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

slbNewCfgPeerTable 1.3.6.1.4.1.1872.2.1.5.33
The table of Synch Peer Switch configuration in the new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgPeerEntry

slbNewCfgPeerEntry 1.3.6.1.4.1.1872.2.1.5.33.1
Information about synch peer switch configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgPeerEntry  

slbNewCfgPeerIndex 1.3.6.1.4.1.1872.2.1.5.33.1.1
The index number for synch peer switchs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgPeerIpAddr 1.3.6.1.4.1.1872.2.1.5.33.1.2
The IP address of the peer switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbNewCfgPeerState 1.3.6.1.4.1.1872.2.1.5.33.1.3
Enable or disable the peer switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

slbNewCfgPeerDelete 1.3.6.1.4.1.1872.2.1.5.33.1.4
By setting the value to delete(2), the entire row is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurCfgSyncFilt 1.3.6.1.4.1.1872.2.1.5.34
Enable or disable synch filter configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncFilt 1.3.6.1.4.1.1872.2.1.5.35
Enable or disable synch filter configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncPort 1.3.6.1.4.1.1872.2.1.5.36
Enable or disable synch port configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncPort 1.3.6.1.4.1.1872.2.1.5.37
Enable or disable synch port configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncVrrp 1.3.6.1.4.1.1872.2.1.5.38
Enable or disable synch VRRP Priorities.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncVrrp 1.3.6.1.4.1.1872.2.1.5.39
Enable or disable synch VRRP Priorities.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncPip 1.3.6.1.4.1.1872.2.1.5.40
Enable or disable synch proxy IP addresses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncPip 1.3.6.1.4.1.1872.2.1.5.41
Enable or disable synch proxy IP addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.1.5.42
Enable or disable Virtual Matrix Architecture.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.1.5.43
Enable or disable Virtual Matrix Architecture.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgFailOverTable 1.3.6.1.4.1.1872.2.1.5.16.1
The table of current switch fail-over configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgFailOverTblEntry

slbCurCfgFailOverTblEntry 1.3.6.1.4.1.1872.2.1.5.16.1.1
A row in the current switch fail-over configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgFailOverTblEntry  

slbCurCfgFailOverIndex 1.3.6.1.4.1.1872.2.1.5.16.1.1.1
The index of current switch fail-over configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgFailOverPrimaryIp 1.3.6.1.4.1.1872.2.1.5.16.1.1.2
The IP address of the Primary switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgFailOverSecondaryIp 1.3.6.1.4.1.1872.2.1.5.16.1.1.3
The IP address of the Secondary switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgFailOverSilenceInterval 1.3.6.1.4.1.1872.2.1.5.16.1.1.4
Number of seconds before a silent peer is assumed down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..120  

slbCurCfgFailOverState 1.3.6.1.4.1.1872.2.1.5.16.1.1.5
Enable or disable slb switch failover feature.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbCurCfgFailOverRouteSupply 1.3.6.1.4.1.1872.2.1.5.16.1.1.6
Enable or disable to supply network routes update when switch is a standby switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgFailOverTable 1.3.6.1.4.1.1872.2.1.5.16.2
The table of new switch fail-over configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgFailOverTblEntry

slbNewCfgFailOverTblEntry 1.3.6.1.4.1.1872.2.1.5.16.2.1
A row in the new switch fail-over configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgFailOverTblEntry  

slbNewCfgFailOverIndex 1.3.6.1.4.1.1872.2.1.5.16.2.1.1
The index of new switch fail-over configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgFailOverPrimaryIp 1.3.6.1.4.1.1872.2.1.5.16.2.1.2
The IP address of the Primary switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbNewCfgFailOverSecondaryIp 1.3.6.1.4.1.1872.2.1.5.16.2.1.3
The IP address of the Secondary switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slbNewCfgFailOverSilenceInterval 1.3.6.1.4.1.1872.2.1.5.16.2.1.4
Number of seconds before a silent peer is assumed down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..120  

slbNewCfgFailOverState 1.3.6.1.4.1.1872.2.1.5.16.2.1.5
Enable or disable slb switch failover feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbNewCfgFailOverRouteSupply 1.3.6.1.4.1.1872.2.1.5.16.2.1.6
Enable or disable to supply network routes update when switch is a standby switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgGlobalControl 1.3.6.1.4.1.1872.2.1.5.17
The global state of Server Load Balancing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbNewCfgGlobalControl 1.3.6.1.4.1.1872.2.1.5.18
The global state of Server Load Balancing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

slbCurCfgUrlExpTable 1.3.6.1.4.1.1872.2.1.5.27.1.1
The table of URL expressions in the current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgUrlExpTableEntry

slbCurCfgUrlExpTableEntry 1.3.6.1.4.1.1872.2.1.5.27.1.1.1
Information about a expression for URL parsing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgUrlExpTableEntry  

slbCurCfgUrlExpIndex 1.3.6.1.4.1.1872.2.1.5.27.1.1.1.1
The URL expressions table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgUrlExpression 1.3.6.1.4.1.1872.2.1.5.27.1.1.1.2
The expressions for URL parsing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

slbNewCfgUrlExpTable 1.3.6.1.4.1.1872.2.1.5.27.1.2
The table of URL expressions in the new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgUrlExpTableEntry

slbNewCfgUrlExpTableEntry 1.3.6.1.4.1.1872.2.1.5.27.1.2.1
Information about a expression for URL parsing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgUrlExpTableEntry  

slbNewCfgUrlExpIndex 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.1
The URL expressions table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgUrlExpression 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.2
The expressions for URL parsing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

slbNewCfgUrlExpDelete 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.3
Action object to delete an URL expression. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurCfgUrlRedirNonGetOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.3
This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgUrlRedirNonGetOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.4
This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgUrlRedirCookieOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.5
This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgUrlRedirCookieOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.6
This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgUrlRedirNoCacheOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.7
This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgUrlRedirNoCacheOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.8
This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgUrlRedirUriHashLength 1.3.6.1.4.1.1872.2.1.5.27.1.9
Specify the number of bytes in the URI will be used to hash onto server
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgUrlRedirUriHashLength 1.3.6.1.4.1.1872.2.1.5.27.1.10
Specify the number of bytes in the URI will be used to hash onto server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

slbCurCfgUrlRedirHeader 1.3.6.1.4.1.1872.2.1.5.27.1.11
This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header disabled(2)- Redirect web traffic based on URI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgUrlRedirHeader 1.3.6.1.4.1.1872.2.1.5.27.1.12
This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header disabled(2)- Redirect web traffic based on URI
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgUrlRedirHeaderName 1.3.6.1.4.1.1872.2.1.5.27.1.13
HTTP header name
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slbNewCfgUrlRedirHeaderName 1.3.6.1.4.1.1872.2.1.5.27.1.14
HTTP header name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

slbCurCfgUrlLbPathTable 1.3.6.1.4.1.1872.2.1.5.27.2.1
The table of URL path for URL load balancing in the current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgUrlLbPathTableEntry

slbCurCfgUrlLbPathTableEntry 1.3.6.1.4.1.1872.2.1.5.27.2.1.1
Information about an URL path for URL load balancing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgUrlLbPathTableEntry  

slbCurCfgUrlLbPathIndex 1.3.6.1.4.1.1872.2.1.5.27.2.1.1.1
The URL path table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgUrlLbPathString 1.3.6.1.4.1.1872.2.1.5.27.2.1.1.2
The URL path for URL load balancing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgUrlLbPathTable 1.3.6.1.4.1.1872.2.1.5.27.2.2
The table of URL path for URL load balancing in the new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgUrlLbPathTableEntry

slbCurCfgUrlLbErrorMsg 1.3.6.1.4.1.1872.2.1.5.27.2.3
Customize error message to send back to client when switch cannot bind client's request to servers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slbNewCfgUrlLbErrorMsg 1.3.6.1.4.1.1872.2.1.5.27.2.4
Customize error message to send back to client when switch cannot bind client's request to servers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

slbNewCfgUrlLbPathTableEntry 1.3.6.1.4.1.1872.2.1.5.27.2.2.1
Information about an URL path for URL load balancing.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgUrlLbPathTableEntry  

slbNewCfgUrlLbPathIndex 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.1
The URL path table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewCfgUrlLbPathString 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.2
The URL path for URL load balancing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgUrlLbPathDelete 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.3
Action object to delete an URL Path. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

pmCurCfgMonitoringPort 1.3.6.1.4.1.1872.2.1.6.1
The port number of the monitoring port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgMonitoringPort 1.3.6.1.4.1.1872.2.1.6.2
The port number of the monitoring port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pmCurCfgMirroredPort 1.3.6.1.4.1.1872.2.1.6.3
The port number of the mirrored port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgMirroredPort 1.3.6.1.4.1.1872.2.1.6.4
The port number of the mirrored port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pmCurCfgMonitoredTraffic 1.3.6.1.4.1.1872.2.1.6.5
The type of traffic to be monitored with respect to the mirrored port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), none(2), received(3), transmitted(4), both(5)  

pmNewCfgMonitoredTraffic 1.3.6.1.4.1.1872.2.1.6.6
The type of traffic to be monitored with respect to the mirrored port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), none(2), received(3), transmitted(4), both(5)  

pmCurCfgState 1.3.6.1.4.1.1872.2.1.6.7
The state of Port mirroring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

pmNewCfgState 1.3.6.1.4.1.1872.2.1.6.8
The state of Port mirroring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

trunkGroupTableMaxSize 1.3.6.1.4.1.1872.2.1.7.1
The maximum number of entries in trunk group table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupCurCfgTable 1.3.6.1.4.1.1872.2.1.7.2
The table of trunk group configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGroupCurCfgTableEntry

trunkGroupCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.7.2.1
A row in the trunk group configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrunkGroupCurCfgTableEntry  

trunkGroupCurCfgIndex 1.3.6.1.4.1.1872.2.1.7.2.1.1
The identifier of the trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupCurCfgPorts 1.3.6.1.4.1.1872.2.1.7.2.1.2
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

trunkGroupCurCfgState 1.3.6.1.4.1.1872.2.1.7.2.1.3
Enable or disable a trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trunkGroupCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.7.2.1.4
Default BW contract of a trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgTable 1.3.6.1.4.1.1872.2.1.7.3
The table of trunk group configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGroupNewCfgTableEntry

trunkGroupNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.7.3.1
A row in the trunk group configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrunkGroupNewCfgTableEntry  

trunkGroupNewCfgIndex 1.3.6.1.4.1.1872.2.1.7.3.1.1
The identifier of the trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgPorts 1.3.6.1.4.1.1872.2.1.7.3.1.2
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

trunkGroupNewCfgAddPort 1.3.6.1.4.1.1872.2.1.7.3.1.3
The port to be added in the trunk group. When read, 0 is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgRemovePort 1.3.6.1.4.1.1872.2.1.7.3.1.4
The port to be deleted from the trunk group. when read, 0 is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgState 1.3.6.1.4.1.1872.2.1.7.3.1.5
Enable or disable a trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trunkGroupNewCfgDelete 1.3.6.1.4.1.1872.2.1.7.3.1.6
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

trunkGroupNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.7.3.1.7
Default BW contract of a trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

fltCfgTableMaxSize 1.3.6.1.4.1.1872.2.1.10.1
The maximum number of filtering table entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgTable 1.3.6.1.4.1.1872.2.1.10.2
The filtering table in the new configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltCurCfgTableEntry

fltCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.10.2.1
A row in the filtering table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FltCurCfgTableEntry  

fltCurCfgIndx 1.3.6.1.4.1.1872.2.1.10.2.1.1
The filtering table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgSrcIp 1.3.6.1.4.1.1872.2.1.10.2.1.2
The source IP address to be filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgSrcIpMask 1.3.6.1.4.1.1872.2.1.10.2.1.3
The source IP sub-net mask for filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgDstIp 1.3.6.1.4.1.1872.2.1.10.2.1.4
The destination IP address to be filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgDstIpMask 1.3.6.1.4.1.1872.2.1.10.2.1.5
The destination IP sub-net mask for filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgProtocol 1.3.6.1.4.1.1872.2.1.10.2.1.6
The protocol to be filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.1.10.2.1.7
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.1.10.2.1.8
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgRangeLowDstPort 1.3.6.1.4.1.1872.2.1.10.2.1.9
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgRangeHighDstPort 1.3.6.1.4.1.1872.2.1.10.2.1.10
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgAction 1.3.6.1.4.1.1872.2.1.10.2.1.11
The action for the filtering rule.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER allow(1), deny(2), redirect(3), nat(4)  

fltCurCfgRedirPort 1.3.6.1.4.1.1872.2.1.10.2.1.12
The real server port number used for redirection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgRedirGroup 1.3.6.1.4.1.1872.2.1.10.2.1.13
The real server group to be redirected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgLog 1.3.6.1.4.1.1872.2.1.10.2.1.14
Enable or disable logging.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgState 1.3.6.1.4.1.1872.2.1.10.2.1.15
The state of this filtering rule.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgNat 1.3.6.1.4.1.1872.2.1.10.2.1.16
The selection of destination or source for network address translatin.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER destination-address(1), source-address(2)  

fltCurCfgCache 1.3.6.1.4.1.1872.2.1.10.2.1.17
Enable or disable caching sessions that match filter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgInvert 1.3.6.1.4.1.1872.2.1.10.2.1.18
Turn the invert logic on or off for the filter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER invert-on(1), invert-off(2)  

fltCurCfgClientProxy 1.3.6.1.4.1.1872.2.1.10.2.1.19
Enable or disable client proxy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgTcpAck 1.3.6.1.4.1.1872.2.1.10.2.1.20
Enable or disable filtering on matching TCP ACK and RST flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgUrlRedir 1.3.6.1.4.1.1872.2.1.10.2.1.21
Enable or disable URL redirection. The URL expressions are defined in slbCurCfgUrlTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgSrcMac 1.3.6.1.4.1.1872.2.1.10.2.1.22
The source MAC address to be filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

fltCurCfgDstMac 1.3.6.1.4.1.1872.2.1.10.2.1.23
The Destination MAC address to be filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

fltCurCfgFtpNatActive 1.3.6.1.4.1.1872.2.1.10.2.1.24
Enable or disable FTP NAT for active ftp only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgAclTcpUrg 1.3.6.1.4.1.1872.2.1.10.2.1.25
Enable or disable TCP URG packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpAck 1.3.6.1.4.1.1872.2.1.10.2.1.26
Enable or disable TCP ACK packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpPsh 1.3.6.1.4.1.1872.2.1.10.2.1.27
Enable or disable TCP PSH packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpRst 1.3.6.1.4.1.1872.2.1.10.2.1.28
Enable or disable TCP RST packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpSyn 1.3.6.1.4.1.1872.2.1.10.2.1.29
Enable or disable TCP SYN packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpFin 1.3.6.1.4.1.1872.2.1.10.2.1.30
Enable or disable TCP FIN packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclIcmp 1.3.6.1.4.1.1872.2.1.10.2.1.31
ICMP type to be filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgAclIpOption 1.3.6.1.4.1.1872.2.1.10.2.1.32
Select an IP option to filter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER any(1), rroute(2), tstamp(3), loose(4), strict(5)  

fltCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.10.2.1.33
Filt default BW contract number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltCurCfgAclIpTos 1.3.6.1.4.1.1872.2.1.10.2.1.34
The IP TOS value to be filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgAclIpTosMask 1.3.6.1.4.1.1872.2.1.10.2.1.35
The IP TOS mask for filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgAclIpTosNew 1.3.6.1.4.1.1872.2.1.10.2.1.36
The new IP TOS value to over-write when filtering fired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgFwlb 1.3.6.1.4.1.1872.2.1.10.2.1.37
Enable or disable filtering on firewall redirect hash method.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgTable 1.3.6.1.4.1.1872.2.1.10.3
The filtering table in the new configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltNewCfgTableEntry

fltNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.10.3.1
A row in the filtering table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FltNewCfgTableEntry  

fltNewCfgIndx 1.3.6.1.4.1.1872.2.1.10.3.1.1
The filtering table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fltNewCfgSrcIp 1.3.6.1.4.1.1872.2.1.10.3.1.2
The source IP address to be filtered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

fltNewCfgSrcIpMask 1.3.6.1.4.1.1872.2.1.10.3.1.3
The source IP sub-net mask for filtering.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

fltNewCfgDstIp 1.3.6.1.4.1.1872.2.1.10.3.1.4
The destination IP address to be filtered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

fltNewCfgDstIpMask 1.3.6.1.4.1.1872.2.1.10.3.1.5
The destination IP sub-net mask for filtering.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

fltNewCfgProtocol 1.3.6.1.4.1.1872.2.1.10.3.1.6
The protocol to be filtered.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

fltNewCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.1.10.3.1.7
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

fltNewCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.1.10.3.1.8
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
Status: mandatory Access: read-write
OBJECT-TYPE