ALCATEL-IND1-VRRP-MIB

File: ALCATEL-IND1-VRRP-MIB.mib (36938 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ALCATEL-IND1-BASE IF-MIB INET-ADDRESS-MIB
VRRP-MIB ALCATEL-IND1-VRRP3-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Integer32 RowStatus TruthValue
TEXTUAL-CONVENTION MODULE-COMPLIANCE OBJECT-GROUP
softentIND1Vrrp ifIndex InterfaceIndexOrZero
InetAddressType InetAddress vrrpOperVrId
vrrpOperEntry alaVrrp3OperVrId alaVrrp3OperIpVersion
alaVrrp3OperEntry

Defined Types

AlaVrTrackId  
A number that serves to uniquely identify a tracking policy.
TEXTUAL-CONVENTION    
  Integer32 1..255  

AlaVrGroupId  
A number that serves to uniquely identify a virtual router group.
TEXTUAL-CONVENTION    
  Integer32 1..255  

AlaVrrpTrackEntry  
SEQUENCE    
  alaVrrpTrackId AlaVrTrackId
  alaVrrpTrackState INTEGER
  alaVrrpTrackAdminState INTEGER
  alaVrrpTrackEntityType INTEGER
  alaVrrpTrackEntityPort InterfaceIndexOrZero
  alaVrrpTrackPriority Integer32
  alaVrrpTrackRowStatus RowStatus
  alaVrrpTrackEntityInterface InterfaceIndexOrZero
  alaVrrpTrackEntityIpv6Interface InterfaceIndexOrZero
  alaVrrpTrackEntityIpAddrType InetAddressType
  alaVrrpTrackEntityIpAddr InetAddress
  alaVrrpTrackBfdStatus INTEGER

AlaVrrpAssoTrackEntry  
SEQUENCE    
  alaVrrpAssoTrackId AlaVrTrackId
  alaVrrpAssoTrackRowStatus RowStatus

AlaVrrpGroupEntry  
SEQUENCE    
  alaVrrpGroupId AlaVrGroupId
  alaVrrpGroupInterval Integer32
  alaVrrpGroupPriority Integer32
  alaVrrpGroupPreemptMode TruthValue
  alaVrrpGroupAdminState INTEGER
  alaVrrpGroupSetParam INTEGER
  alaVrrpGroupOverride TruthValue
  alaVrrpGroupRowStatus RowStatus

AlaVrrpAssoGroupEntry  
SEQUENCE    
  alaVrrpAssoGroupRowStatus RowStatus

AlaVrrpOperEntry  
SEQUENCE    
  alaVrrpCurrentPriority Integer32
  alaVrrpTrackCount Integer32
  alaVrrpGroupIdent Integer32

AlaVrrp3AssoTrackEntry  
SEQUENCE    
  alaVrrp3AssoTrackId AlaVrTrackId
  alaVrrp3AssoTrackRowStatus RowStatus

AlaVrrp3OperExEntry  
SEQUENCE    
  alaVrrp3CurrentPriority Integer32
  alaVrrp3TrackCount Integer32
  alaVrrp3GroupIdent Integer32

Defined Values

alcatelIND1VRRPMIB 1.3.6.1.4.1.6486.801.1.2.1.28.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary VRRP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1VRRPMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.28.1.1
OBJECT IDENTIFIER    

alaVRRPConfig 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1
OBJECT IDENTIFIER    

alaVrrpTracking 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2
OBJECT IDENTIFIER    

alaVrrpOperations 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3
OBJECT IDENTIFIER    

alaVRRPv2Config 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4
OBJECT IDENTIFIER    

alaVrrpGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5
OBJECT IDENTIFIER    

alaVRRPStartDelay 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.1
Once VRRP's initial configuration is complete at startup, this object specifies the number of seconds VRRP will delay before leaving the initialize state. This delay is to allow external protocols (spanning tree, OSPF, etc.) time to converge so that when a VRRP virtual router becomes master it will be able to forward traffic.
OBJECT-TYPE    
  Integer32 0..180  

alaVrrpBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.2
Enable or disable the BFD for VRRP.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaVRRPDefaultInterval 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.1
The VRRP Router default time interval, in seconds, between sending advertisement messages.
OBJECT-TYPE    
  Integer32 1..255  

alaVRRPDefaultPriority 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.2
This object specifies the VRRP Router default priority to be used for the virtual router master election process. Higher values imply higher priority.
OBJECT-TYPE    
  Integer32 1..254  

alaVRRPDefaultPreemptMode 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.3
The VRRP Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master.
OBJECT-TYPE    
  TruthValue  

alaVRRPAdminState 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.4
This object is used to force a change in to the vrrpOperAdminState of virtual routers in the vrrpOperTable. Setting a value of allEnable will cause the vrrpOperAdminState of each entry in the table to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set.
OBJECT-TYPE    
  INTEGER allEnable(1), enable(2), disable(3)  

alaVRRPSetParam 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.5
This object is used to force the virtual routers in the vrrpOperTable to revert to the default parameter values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. Unless alaVRRPOverride is set to true only virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set.
OBJECT-TYPE    
  INTEGER none(1), all(2), interval(3), priority(4), preempt(5)  

alaVRRPOverride 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.6
This object is used in combination with the alaVRRPSetParam object to force all virtual routers in the vrrpOperTable to revert to the default values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. This object is of little value when read but will return the last value to which it was set.
OBJECT-TYPE    
  TruthValue  

alaVrrpTrackTable 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1
VRRP Tracking Policy table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpTrackEntry' items.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrrpTrackEntry

alaVrrpTrackEntry 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1
An entry in the vrrpTrackTable containing the operational characteristics of a VRRP tracking policy. Rows in the table cannot be modified unless the value of `vrrpTrackAdminState' is `disabled'.
OBJECT-TYPE    
  AlaVrrpTrackEntry  

alaVrrpTrackId 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.1
This object contains the Tracking Policy Identifier (TRACKID).
OBJECT-TYPE    
  AlaVrTrackId  

alaVrrpTrackState 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.2
The conditional state of the tracking policy entity.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alaVrrpTrackAdminState 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.3
This object will enable/disable the tracking policy function.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaVrrpTrackEntityType 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.4
This object specifies the tracking policy entity type currently in use.
OBJECT-TYPE    
  INTEGER port(2), ipaddress(3), interface(4), ipv6Interface(5)  

alaVrrpTrackEntityPort 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.6
This object contains the Tracking Policy Entity. A port ifIndex or 0 if not significant. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type.
OBJECT-TYPE    
  InterfaceIndexOrZero  

alaVrrpTrackPriority 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.8
This object specifies the value by which the priority of virtual routers associated with the tracking policy will be decremented when the tracked entity's operational state transitions from up to down, or will be incremented when the tracked entity's operational state transitions from down to up.
OBJECT-TYPE    
  Integer32 0..255  

alaVrrpTrackRowStatus 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.9
The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpTrackRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instances of `vrrpTrackId', and either one of : alaVrrpTrackEntityPort, or alaVrrpTrackEntityInterface have been set.
OBJECT-TYPE    
  RowStatus  

alaVrrpTrackEntityInterface 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.10
This object contains the Tracking Policy Entity. An interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type.
OBJECT-TYPE    
  InterfaceIndexOrZero  

alaVrrpTrackEntityIpv6Interface 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.11
This object contains the Tracking Policy Entity. An Ipv6 interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type.
OBJECT-TYPE    
  InterfaceIndexOrZero  

alaVrrpTrackEntityIpAddrType 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.12
This object contains the Tracking Policy Entity IP Address type.
OBJECT-TYPE    
  InetAddressType  

alaVrrpTrackEntityIpAddr 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.13
This object contains the Tracking Policy Entity. An IPv4 for or IPv6 Address based on alaVrrpTrackEntityIpAddrType. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type.
OBJECT-TYPE    
  InetAddress  

alaVrrpTrackBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.14
Enables BFD for a VRRP track.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaVrrpAssoTrackTable 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2
The table of tracking policies associated with this virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrrpAssoTrackEntry

alaVrrpAssoTrackEntry 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1
An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrpTrackCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the 'vrrpOperState' has transitioned to `initialize'.
OBJECT-TYPE    
  AlaVrrpAssoTrackEntry  

alaVrrpAssoTrackId 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.1
The identifier of the tracking policy the virtual router is responsible for monitoring.
OBJECT-TYPE    
  AlaVrTrackId  

alaVrrpAssoTrackRowStatus 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.2
The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent.
OBJECT-TYPE    
  RowStatus  

alaVrrpGroupTable 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1
VRRP Group table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpGroupEntry' items.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrrpGroupEntry

alaVrrpGroupEntry 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1
An entry in the vrrpGroupTable containing the characteristics of a VRRP group.
OBJECT-TYPE    
  AlaVrrpGroupEntry  

alaVrrpGroupId 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.1
This object contains the Tracking Policy Identifier (GROUPID).
OBJECT-TYPE    
  AlaVrGroupId  

alaVrrpGroupInterval 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.2
The VRRP Group time interval, in seconds, between sending advertisement messages.
OBJECT-TYPE    
  Integer32 1..255  

alaVrrpGroupPriority 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.3
This object specifies the VRRP Group priority to be used for the virtual router master election process. Higher values imply higher priority.
OBJECT-TYPE    
  Integer32 1..254  

alaVrrpGroupPreemptMode 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.4
The VRRP Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master.
OBJECT-TYPE    
  TruthValue  

alaVrrpGroupAdminState 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.5
This object is used to force a change in to the vrrpOperAdminState of virtual routers in the corresponding alaVRRPAssoGroupTable entry. Setting a value of allEnable will cause the vrrpOperAdminState of each vrrpOperEntry to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers in the group whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVrrpGroupAdminState or alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set.
OBJECT-TYPE    
  INTEGER allEnable(1), enable(2), disable(3)  

alaVrrpGroupSetParam 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.6
This object is used to force the virtual routers in the corresponding alaVRRPAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. Unless alaVrrpGroupOverride is set to true only virtual routers previously configured with default or group parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set.
OBJECT-TYPE    
  INTEGER none(1), all(2), interval(3), priority(4), preempt(5)  

alaVrrpGroupOverride 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.7
This object is used in combination with the alaVrrpGroupSetParam object to force all virtual routers in the corresponding alaVrrpAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. This object is of little value when read but will return the last value to which it was set.
OBJECT-TYPE    
  TruthValue  

alaVrrpGroupRowStatus 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.8
The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `alaVrrpGroupRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `alaVrrpGroupId' has been set.
OBJECT-TYPE    
  RowStatus  

alaVrrpAssoGroupTable 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2
The table of virtual routers associated with this group.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrrpAssoGroupEntry

alaVrrpAssoGroupEntry 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1
An entry in the table contains a virtual router id that is associated with a virtual router group.
OBJECT-TYPE    
  AlaVrrpAssoGroupEntry  

alaVrrpAssoGroupRowStatus 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1.1
The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group. Destroying the entry or setting it to notInService(2) removes the associated virtual router from the group. The use of other values is implementation-dependent.
OBJECT-TYPE    
  RowStatus  

alaVrrpOperTable 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1
Table of virtual router configuration info.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrrpOperEntry

alaVrrpOperEntry 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1
An entry in the table, config information about a given virtual router.
OBJECT-TYPE    
  AlaVrrpOperEntry  

alaVrrpCurrentPriority 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.1
This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es).
OBJECT-TYPE    
  Integer32 0..255  

alaVrrpTrackCount 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.2
The number of tracking policies associated with a virtual router.
OBJECT-TYPE    
  Integer32  

alaVrrpGroupIdent 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.3
The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group.
OBJECT-TYPE    
  Integer32 0..255  

alaVrrp3AssoTrackTable 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3
The table of tracking policies associated with this virtual router.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrrp3AssoTrackEntry

alaVrrp3AssoTrackEntry 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1
An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given IP Version, VrId, and ifIndex will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrp3TrackCount'). Rows in the table cannot be modified unless the value of `alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'.
OBJECT-TYPE    
  AlaVrrp3AssoTrackEntry  

alaVrrp3AssoTrackId 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.1
The identifier of the tracking policy the virtual router is responsible for monitoring.
OBJECT-TYPE    
  AlaVrTrackId  

alaVrrp3AssoTrackRowStatus 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.2
The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent.
OBJECT-TYPE    
  RowStatus  

alaVrrp3OperExTable 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2
Table of virtual router configuration info.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrrp3OperExEntry

alaVrrp3OperExEntry 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1
An entry in the table, config information about a given virtual router.
OBJECT-TYPE    
  AlaVrrp3OperExEntry  

alaVrrp3CurrentPriority 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.1
This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es).
OBJECT-TYPE    
  Integer32 0..255  

alaVrrp3TrackCount 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.2
The number of tracking policies associated with a virtual router.
OBJECT-TYPE    
  Integer32  

alaVrrp3GroupIdent 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.3
The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group.
OBJECT-TYPE    
  Integer32 0..255  

alcatelIND1VRRPMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.28.1.2
OBJECT IDENTIFIER    

alcatelIND1VRRPMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1
OBJECT IDENTIFIER    

alcatelIND1VRRPMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2
OBJECT IDENTIFIER    

alaVRRPCompliance 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1.1
The compliance statement for switches with Alcatel VRRP and implementing ALCATEL-IND1-VRRP-MIB.
MODULE-COMPLIANCE    

alaVRRPConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.1
A collection of objects to support management of Alcatel VRRP.
OBJECT-GROUP    

alaVRRPv2ConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.2
A collection of objects to support management of Alcatel VRRP
OBJECT-GROUP    

alaVrrp3AssoTrackTableGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.3
The table of tracking policies associated with this virtual router.
OBJECT-GROUP    

alaVrrp3OperExEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.4
Table of virtual router configuration info.
OBJECT-GROUP    

alaVrrpAssoGroupEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.5
The table of virtual routers associated with this group.
OBJECT-GROUP    

alaVrrpAssoTrackEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.6
The table of tracking policies associated with this virtual router.
OBJECT-GROUP    

alaVrrpOperEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.7
Config information about a given virtual router.
OBJECT-GROUP    

alaVrrpGroupTableGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.8
VRRP Group table objects with attributes of VRRP Group.
OBJECT-GROUP    

alaVrrpTrackGroup 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.9
VRRP Tracking Policy objects.
OBJECT-GROUP