ALCATEL-IND1-UDP-RELAY-MIB

File: ALCATEL-IND1-UDP-RELAY-MIB.mib (69585 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMP-FRAMEWORK-MIB
SNMPv2-CONF	ALCATEL-IND1-BASE	IF-MIB

Imported symbols

IpAddress	MODULE-IDENTITY	NOTIFICATION-TYPE
OBJECT-TYPE	OBJECT-IDENTITY	Unsigned32
Integer32	Counter32	DisplayString
MacAddress	TEXTUAL-CONVENTION	RowStatus
SnmpAdminString	MODULE-COMPLIANCE	NOTIFICATION-GROUP
OBJECT-GROUP	routingIND1UdpRelay	alaDhcpClientTraps
InterfaceIndex

Defined Types

IphelperServIndex
IphelperServIndex provides a means to specify a service to be forwarded by UDP Relay. Some values indicate a specfic protocol and associated UDP port(s): ---------------- ---------- ----------- Value Protocol UDP port(s) ---------------- ---------- ----------- iphelperBootp BOOTP/DHCP 67/68 iphelperNbnsNbdd NBNS/NBDD 137/138 iphelperNbdd NBDD 138 iphelperDns DNS 53 iphelperTacacs TACACS 65 iphelperTftp TFTP 69 iphelperNtp NTP 123 The remaining values are to be used for other services: ---------------- ---------- ----------- Value Protocol UDP port ---------------- ---------- ----------- iphelperOther1 ? user-specified iphelperOther2 ? user-specified iphelperOther3 ? user-specified iphelperOther4 ? user-specified iphelperOther5 ? user-specified iphelperOther6 ? user-specified iphelperOther7 ? user-specified iphelperOther8 ? user-specified iphelperOther9 ? user-specified iphelperOther10 ? user-specified
TEXTUAL-CONVENTION
	INTEGER	iphelperBootp(1), iphelperNbnsNbdd(2), iphelperNbdd(3), iphelperDns(4), iphelperTacacs(5), iphelperTftp(6), iphelperNtp(7), iphelperOther1(8), iphelperOther2(9), iphelperOther3(10), iphelperOther4(11), iphelperOther5(12), iphelperOther6(13), iphelperOther7(14), iphelperOther8(15), iphelperOther9(16), iphelperOther10(17), iphelperOther11(18), iphelperOther12(19), iphelperOther13(20), iphelperOther14(21), iphelperOther15(22), iphelperOther16(23), iphelperOther17(24), iphelperOther18(25), iphelperOther19(26), iphelperOther20(27), iphelperOther21(28), iphelperOther22(29), iphelperOther23(30), iphelperOther24(31), iphelperOther25(32)

IphelpereOption82ASCIIFieldType
Ip helper Option 82 Format ASCII field type
TEXTUAL-CONVENTION
	INTEGER	none(0), macAddress(1), systemName(2), userString(3), interfaceAlias(4), vlan(5), interface(6), cvlan(7)

IphelperOption82CircuitOrRemoteId
Circuit Id or Remote Id for Option 82 Format ASCII field.
TEXTUAL-CONVENTION
	INTEGER	circuitid(1), remoteid(2)

IphelperEntry
SEQUENCE
	iphelperService	IphelperServIndex
	iphelperForwAddr	IpAddress
	iphelperVlan	Unsigned32
	iphelperStatus	RowStatus

IphelperStatEntry
SEQUENCE
	iphelperServerAddress	IpAddress
	iphelperRxFromClient	Unsigned32
	iphelperTxToServer	Unsigned32
	iphelperMaxHopsViolation	Unsigned32
	iphelperForwDelayViolation	Unsigned32
	iphelperResetAll	INTEGER
	iphelperAgentInfoViolation	Counter32
	iphelperInvalidGatewayIP	Counter32
	iphelperInvalidAgentInfoOptFrmSrver	Counter32

IphelperxServicePortAssociationEntry
SEQUENCE
	iphelperxServicePortAssociationService	IphelperServIndex
	iphelperxServicePortAssociationPort	Unsigned32
	iphelperxServicePortAssociationName	DisplayString
	iphelperxServicePortAssociationStatus	RowStatus

IphelperxPortServiceAssociationEntry
SEQUENCE
	iphelperxPortServiceAssociationService	IphelperServIndex
	iphelperxPortServiceAssociationPort	Unsigned32
	iphelperxPortServiceAssociationName	DisplayString
	iphelperxPortServiceAssociationStatus	RowStatus

IphelperPropertiesEntry
SEQUENCE
	iphelperxPropertiesService	IphelperServIndex
	iphelperxPropertiesPort	Unsigned32
	iphelperxPropertiesName	DisplayString

IphelperxStatEntry
SEQUENCE
	iphelperxStatService	IphelperServIndex
	iphelperxStatServerAddress	IpAddress
	iphelperxStatVlan	Unsigned32
	iphelperxStatRxFromClient	Unsigned32
	iphelperxStatTxToServer	Unsigned32
	iphelperxStatReset	INTEGER

IphelperDhcpSnoopingVlanEntry
SEQUENCE
	iphelperDhcpSnoopingVlanNumber	INTEGER
	iphelperDhcpSnoopingVlanOpt82DataInsertionStatus	INTEGER
	iphelperDhcpSnoopingVlanMacAddrVerificationStatus	INTEGER
	iphelperDhcpSnoopingVlanTrafficSuppressionStatus	INTEGER
	iphelperDhcpSnoopingVlanStatus	RowStatus

IphelperDhcpSnoopingPortEntry
SEQUENCE
	iphelperDhcpSnoopingPortIfIndex	InterfaceIndex
	iphelperDhcpSnoopingPortTrustMode	INTEGER
	iphelperDhcpSnoopingPortTrafficSuppression	INTEGER
	iphelperDhcpSnoopingPortMacAddrViolation	Counter32
	iphelperDhcpSnoopingPortDhcpServerViolation	Counter32
	iphelperDhcpSnoopingPortOption82Violation	Counter32
	iphelperDhcpSnoopingPortRelayAgentViolation	Counter32
	iphelperDhcpSnoopingPortBindingViolation	Counter32
	iphelperDhcpSnoopingPortIpSourceFiltering	INTEGER

IphelperDhcpSnoopingBindingEntry
SEQUENCE
	iphelperDhcpSnoopingBindingMacAddress	MacAddress
	iphelperDhcpSnoopingBindingIfIndex	InterfaceIndex
	iphelperDhcpSnoopingBindingIpAddress	IpAddress
	iphelperDhcpSnoopingBindingVlan	Unsigned32
	iphelperDhcpSnoopingBindingLeaseTime	Unsigned32
	iphelperDhcpSnoopingBindingType	INTEGER
	iphelperDhcpSnoopingBindingRowStatus	RowStatus

IphelperDhcpSourceFilterVlanEntry
SEQUENCE
	iphelperDhcpSourceFilterVlanNumber	Integer32
	iphelperDhcpSourceFilterVlanFilteringStatus	INTEGER

IphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry
SEQUENCE
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableIndex	IphelperOption82CircuitOrRemoteId
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1	IphelpereOption82ASCIIFieldType
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1StrVal	SnmpAdminString
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2	IphelpereOption82ASCIIFieldType
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2StrVal	SnmpAdminString
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3	IphelpereOption82ASCIIFieldType
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3StrVal	SnmpAdminString
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4	IphelpereOption82ASCIIFieldType
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4StrVal	SnmpAdminString
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5	IphelpereOption82ASCIIFieldType
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5StrVal	SnmpAdminString
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableDelimiter	SnmpAdminString
	iphelperDhcpSnoopingOption82FormatASCIIConfigurableStatus	RowStatus

Defined Values

alcatelIND1UDPRelayMIB		1.3.6.1.4.1.6486.801.1.2.1.10.9.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line UDP Relay to forward BOOTP/DHCP requests across VLANs The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY

alcatelIND1UDPRelayMIBObjects		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1
Branch For UDP Relay Subsystem Managed Objects.
Status: current	Access: read-only
OBJECT-IDENTITY

alcatelIND1UDPRelayMIBConformance		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2
Branch For UDP Relay Subsystem Conformance Information.
Status: current	Access: read-only
OBJECT-IDENTITY

alcatelIND1UDPRelayMIBGroups		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1
Branch For UDP Relay Subsystem Units Of Conformance.
Status: current	Access: read-only
OBJECT-IDENTITY

alcatelIND1UDPRelayMIBCompliances		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.2
Branch For UDP Relay Subsystem Compliance Statements.
Status: current	Access: read-only
OBJECT-IDENTITY

iphelperMIB		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1
OBJECT IDENTIFIER

iphelperTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1
A list of active UDP Relay Service instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperEntry

iphelperEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1
An entry in UDP Relay table
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperEntry

iphelperService		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.1
This specifies a service to be forwarded by UDP Relay.
Status: current	Access: read-create
OBJECT-TYPE
	IphelperServIndex

iphelperForwAddr		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.2
This specifies relayed service's forwarding address. For entries with iphelperService equal to iphelperBootp(1): This object can either be set to a distinct IP address (e.g. the address of a server), to an IP broadcast address or a VLAN. A value of 0.0.0.0 indicates that no forwarding address is being used. For entries with iphelperService not equal to ipHelperBootp(1), this object is not settable.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

iphelperVlan		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.3
This specifies a Vlan to which the service is to be forwarded. For entries with iphelperService equal to iphelperBootp(1), a value of 0 indicates that no vlan is being used. For entries with iphelperService not equal to ipHelperBootp(1), only non-zero values may be specified.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

iphelperStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.4
Row Status for creating/deleting
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

iphelperStatTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2
This keeps statistics for each service by server address.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperStatEntry

iphelperStatEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1
An entry in the stat table.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperStatEntry

iphelperServerAddress		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.1
This specifies the unique server address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

iphelperRxFromClient		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.2
This keeps track of the number of packets recieved from the client.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..65535

iphelperTxToServer		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.3
This keeps track of the number of packets transmitted to the server.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..65535

iphelperMaxHopsViolation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.4
This keeps track of the number of packets dropped due to max hops violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..65535

iphelperForwDelayViolation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.5
This keeps track of the number of packets dropped due to forward delay violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..65535

iphelperResetAll		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.6
This parameter resets all the stats.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

iphelperAgentInfoViolation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.7
This keeps track of the number of packets dropped due to DHCP packet with giaddr field not equal to zero and Relay Agent Information option is present and also the Relay Agent Information Policy is set to DROP.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperInvalidGatewayIP		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.8
This keeps track of the number of packets dropped due to giaddr matching a local subnet and Relay Agent Information option is present in the DHCP packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperInvalidAgentInfoOptFrmSrver		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.9
This keeps track of the number of packets dropped due to invalid from DHCP server with Relay Agent Information option in the DHCP packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperForwDelay		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.3
This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. For other services it is ignored.It is typically set as seconds, but the value is totally client dependent.This relay will not forward frames until client frames have 'secs' field set to atleast the value iphelperForwDelay.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..65535

iphelperMaxHops		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.4
This sets the BOOTP/DHCP relay's maximum hops forwarding limit and is only used by the BOOTP/DHCP service. For other services it is ignored. If a frame arrives with hopcount greater than or equal to iphelperMaxHops, it will be dropped.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..16

iphelperForwardOption		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.5
This is only significant for the BOOTP/DHCP service. It allows the relay to forward DHCP requests only when they are issued by an Authenticated Vlan client.Needed to prevent having multiple relays enabled on the same vlan. Default value is standard
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	standard(1), avlanOnly(2), perVlanOnly(3)

iphelperBootupOption		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.6
This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of the relay to get an IP address at the time of system boot-up and assign that IP address as the router IP of the default VLAN. Default option is Disable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

iphelperBootupPacketOption		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.7
This is only significant for the BOOTP/DHCP service. It allows the user to select the packet format with the choices of BOOTP and DHCP to be used to get an IP address at the time of system boot-up. Default option is DHCP
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	bootp(1), dhcp(2)

iphelperxServicePortAssociationTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8
A list of services being forwarded with their associated ports. An entry in this table is allowed only for the services listed below: iphelperBootp iphelperNbnsNbdd iphelperNbdd iphelperDns iphelperTacacs iphelperTftp iphelperNtp
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperxServicePortAssociationEntry

iphelperxServicePortAssociationEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8.1
An entry in UDP Relay PortAssociation table
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperxServicePortAssociationEntry

iphelperxServicePortAssociationService		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8.1.1
This specifies the service being forwarded. Legal values: iphelperBootp(1) iphelperNbnsNbdd(2) iphelperNbdd(3) iphelperDns(4) iphelperTacacs(5) iphelperTftp(6) iphelperNtp(7)
Status: current	Access: read-write
OBJECT-TYPE
	IphelperServIndex

iphelperxServicePortAssociationPort		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8.1.2
UDP port for the service.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

iphelperxServicePortAssociationName		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8.1.3
The name and/or description of the service.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..30)

iphelperxServicePortAssociationStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8.1.4
Row Status for creating/deleting
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

iphelperxPortServiceAssociationTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9
A list of services being forwarded with their associated ports. An entry in this table is allowed only for those services NOT using one of the following well-known ports: 53 - DNS 65 - TACACS 67 - BOOTP/DHCP 68 - BOOTP/DHCP 69 - TFTP 123 - NTP 137 - NBNS 138 - NBDD
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperxPortServiceAssociationEntry

iphelperxPortServiceAssociationEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9.1
An entry in UDP Relay PortAssociation table
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperxPortServiceAssociationEntry

iphelperxPortServiceAssociationService		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9.1.1
This specifies the service being forwarded.
Status: current	Access: read-only
OBJECT-TYPE
	IphelperServIndex

iphelperxPortServiceAssociationPort		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9.1.2
UDP port for the service. May not be one of the following well-known ports: 53 - DNS 65 - TACACS 67 - BOOTP/DHCP 68 - BOOTP/DHCP 69 - TFTP 123 - NTP 137 - NBNS 138 - NBDD
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

iphelperxPortServiceAssociationName		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9.1.3
The name and/or description of the service.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

iphelperxPortServiceAssociationStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9.1.4
Row Status for creating/deleting
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

iphelperxPropertiesTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.10
A list of services being forwarded with their associated ports. There is an entry in this table for each service being forwarded by UDP Relay, including those with implied protocol/port associations.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperPropertiesEntry

iphelperxPropertiesEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.10.1
An entry in UDP Relay Service Properties table
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperPropertiesEntry

iphelperxPropertiesService		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.10.1.1
This specifies the service to be forwarded.
Status: current	Access: read-only
OBJECT-TYPE
	IphelperServIndex

iphelperxPropertiesPort		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.10.1.2
UDP port for the service.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

iphelperxPropertiesName		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.10.1.3
The name/description of the service.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..30)

iphelperxStatTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11
This keeps statistics for each service by server address.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperxStatEntry

iphelperxStatEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11.1
An entry in the stat table.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperxStatEntry

iphelperxStatService		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11.1.1
This specifies the service being forwarded.
Status: current	Access: read-only
OBJECT-TYPE
	IphelperServIndex

iphelperxStatServerAddress		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11.1.2
This specifies the unique server address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

iphelperxStatVlan		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11.1.3
This specifies the unique Vlan of the server.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

iphelperxStatRxFromClient		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11.1.4
This keeps track of the number of packets recieved from the client.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

iphelperxStatTxToServer		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11.1.5
This keeps track of the number of packets transmitted to the server.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

iphelperxStatReset		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11.1.6
This parameter resets all the stats for this entry.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

iphelperAgentInformation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.12
This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of inserting the relay agent information option to the DHCP option field according to RFC 3046.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

iphelperAgentInformationPolicy		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.13
This is only significant for the BOOTP/DHCP service. It allows the user to select the policy of either drop, keep or replace the relay agent information option if it is already present in the DHCP packet.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	drop(1), keep(2), replace(3)

iphelperDhcpSnoopingVlanTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14
A list of vlans that have DHCP Snooping enabled.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperDhcpSnoopingVlanEntry

iphelperDhcpSnoopingVlanEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14.1
A DHCP Snooping VLAN entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperDhcpSnoopingVlanEntry

iphelperDhcpSnoopingVlanNumber		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14.1.1
The VLAN number identifying this instance. Valid range from 1 to 4094.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4094

iphelperDhcpSnoopingVlanOpt82DataInsertionStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14.1.2
The DHCP Option-82 data insertion status. Default value is enabled, which means once the VLAN is enabled for DHCP snooping, the Option-82 field will be inserted in the DHCP packets between the Relay Agent and the DHCP Server, on all the ports belong to the VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingVlanMacAddrVerificationStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14.1.3
The DHCP Snooping MAC Address verification status. Default value is enabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vlan port, it compares the source MAC address and the client Hardware Address in the DHCP packet. If mismatch, the packet will be dropped.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingVlanTrafficSuppressionStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14.1.4
The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vlan port will not be flooded throughout the VLAN. The usage of UDP/DHCP Relay Agent will be enforced. Traffic will always be forwarded to CPU.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingVlanStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14.1.5
Row Status for creating/deleting
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

iphelperDhcpSnoopingPortTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15
A list of ports that have DHCP Snooping trust status.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperDhcpSnoopingPortEntry

iphelperDhcpSnoopingPortEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1
A DHCP Snooping Port entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperDhcpSnoopingPortEntry

iphelperDhcpSnoopingPortIfIndex		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.1
The ifIndex subindex identifying this instance.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

iphelperDhcpSnoopingPortTrustMode		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.2
The DHCP Snooping's VLAN port's trust mode. Default value is client-only, which means once the VLAN is enabled for DHCP snooping, the vlan ports only allow DHCP client packets. Blocked means all DHCP traffic is block on the port. Trusted means all DHCP traffic is allowed on the port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	blocked(1), clientOnly(2), trusted(3)

iphelperDhcpSnoopingPortTrafficSuppression		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.3
The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those ports will not be flooded instead will always be forwarded to CPU.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingPortMacAddrViolation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.4
This keeps track of the number of packets dropped due to DHCP packet with the source MAC Address not equal the client DHCP Hardware address in the DHCP packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperDhcpSnoopingPortDhcpServerViolation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.5
This keeps track of the number of packets dropped due to receiving an DHCP server packet on a DHCP Snooping enabled port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperDhcpSnoopingPortOption82Violation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.6
This keeps track of the number of packets dropped due to a relay agent forards a packet that includes option 82 info to an untrusted port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperDhcpSnoopingPortRelayAgentViolation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.7
This keeps track of the number of packets dropped due to an DHCP relay agent forwards a DHCP packate includes an relay agent ip address that is not 0.0.0.0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperDhcpSnoopingPortBindingViolation		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.8
This keeps track of the number of packets dropped due to receiving an DHCP Relase or DHCP Decline message that contains a MAC address in the DHCP snooping binding table, but the interface information in the binding table does not match the interface on which the message was received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

iphelperDhcpSnoopingPortIpSourceFiltering		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15.1.9
The DHCP Snooping IP Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IP address, MAC address and port will be allowed.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingBindingTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16
DHCP Snooping binding table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperDhcpSnoopingBindingEntry

iphelperDhcpSnoopingBindingEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1
A DHCP Snooping binding entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperDhcpSnoopingBindingEntry

iphelperDhcpSnoopingBindingMacAddress		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1.1
The MAC Address subindex identifying this instance.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

iphelperDhcpSnoopingBindingIfIndex		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1.2
The IfIndex subindex identifying this instance. It is the the interface where the DHCP request is coming in from.
Status: current	Access: read-write
OBJECT-TYPE
	InterfaceIndex

iphelperDhcpSnoopingBindingIpAddress		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1.3
The Ip Address offered by the DHCP Server to the Client.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

iphelperDhcpSnoopingBindingVlan		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1.4
It is the VLAN Id where the DHCP client belongs to.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

iphelperDhcpSnoopingBindingLeaseTime		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1.5
The lease time of the client's IP Address.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

iphelperDhcpSnoopingBindingType		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1.6
The learning/configuration nature of the binding entry. Normally, the entries are learned dynamically, while it also can be statically/manually configured.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dynamic(1), static(2)

iphelperDhcpSnoopingBindingRowStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16.1.7
Row Status for creating/deleting
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

iphelperDhcpSnooping		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.17
Enabling DHCP Snooping at the switch level. For the vlan level, it is enabled implicitly when an individual vlan's DHCP Snooping is enbled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	switchLevel(1), disabled(2), vlanLevel(3)

iphelperDhcpSnoopingOpt82DataInsertionStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.18
The DHCP Option-82 data insertion status at switch level. Default value is enabled, the Option-82 field will be inserted in the DHCP packets between the Relay Agent and the DHCP Server, on all the ports belong to the switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingMacAddrVerificationStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.19
The DHCP Snooping MAC Address verification status at switch level. Default value is enabled. Once enabled, for all the incoming DHCP traffic to the port, it compares the source MAC address and the client Hardware Address in the DHCP packet. If mismatch, the packet will be dropped.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingTrafficSuppressionStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.20
The DHCP Snooping Traffic Suppression status at switch level. Default value is disabled. Once enabled, for all the incoming DHCP traffic to the ports will not be flooded The usage of UDP/DHCP Relay Agent will be enforced. DHCP Traffic will always be forwarded to CPU.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingBindingStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.21
This object specifies if the capability of building the DHCP Snooping Binding Table/Database is enable or not. By default, it is enabled. It is applicable for both switch-level or vlan-level DHCP Snooping.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingBindingDatabaseSyncTimeout		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.22
The DHCP Snooping Binding Database synchronization timeout value. It is used to specify the synchronization frequency, in seconds, between the binding table in memory and the binding file in flash.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	180..600

iphelperDhcpSnoopingBindingDatabaseLastSyncTime		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.23
The time stamp of the last successuful DHCP Snooping Binding Database synchronization.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

iphelperDhcpSnoopingBindingDatabaseAction		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.24
This object identifies the action to be performed. Purge: means to clear the binding table entries in the memory. Renew: means to populate the binding table entries from the flash file.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noaction(0), purge(1), renew(2)

iphelperTrafficSuppressionStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.25
DHCP packet traffic suppression status. By default, it is disabled. Once enabled, all incoming DHCP packets will be sent to software only, and no longer be hardware flooded.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingBypassOpt82CheckStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.26
DHCP bypass option-82 check status. By default, it is disabled. Once enabled, it will no longer enforce the check of option-82 field in the incoming DHCP Packets on those untrusted ports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpOption82FormatType		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.27
DHCP option-82 defines the type of information carried in circuit id and remote id sub option fields. If the type selected is string the actual value of the string can be found in iphelperDhcpOption82StringValue. Format type ASCII will insert the configured fields in ASCII format.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	macAddress(1), systemName(2), userString(3), interfaceAlias(4), autoInterfaceAlias(5), ascii(6)

iphelperDhcpOption82StringValue		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.28
The value of the string that will be used in the circuit id and remote id sub options.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

iphelperPXESupport		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.29
When enabled the relay agent will replace the source IP address of the packet with the gateway IP address from the DHCP packet. The default value is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingBindingPersistencyStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.30
DHCP Snooping binding table persistency check status. By default, it is disabled. Once enabled, the binding entries expiry will be solely depend on Lease time
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingOption82FormatASCIIField1		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31
The type of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIField1StringValue		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.32
The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIField2		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.33
The type of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIField2StringValue		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.34
The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIField3		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.35
The type of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIField3StringValue		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.36
The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIField4		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.37
The type of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIField4StringValue		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.38
The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIField5		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.39
The type of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIField5StringValue		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.40
The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIDelimiter		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.41
The value of the delimiter that is inserted between the fields in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This value is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

iphelperDhcpSourceFilterVlanTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.42
A list of vlans that have ip-source-filtering enabled.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperDhcpSourceFilterVlanEntry

iphelperOption82Policy		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.43
This is only significant for the BOOTP/DHCP service. It allows the user to select the option-82 insertion policy of either drop, keep or replace the option-82 information if it is already present in the DHCP packet.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	drop(1), keep(2), replace(3)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44
A list of ascii fields used for Circuit ID or Remote ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry

iphelperDhcpSourceFilterVlanEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.42.1
A Source Filtering enabled VLAN entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperDhcpSourceFilterVlanEntry

iphelperDhcpSourceFilterVlanNumber		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.42.1.1
The VLAN number identifying this instance. Valid range from 1 to 4094.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..4094

iphelperDhcpSourceFilterVlanFilteringStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.42.1.2
The DHCP Snooping IP Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IP address, MAC address , port and vlan will be allowed.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1
An ascii field entry for Circuit ID or Remote ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry

iphelperDhcpSnoopingOption82FormatASCIIConfigurableIndex		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.1
This object specifies the either circuit id or remote id for option82.
Status: current	Access: not-accessible
OBJECT-TYPE
	IphelperOption82CircuitOrRemoteId

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.2
The type of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII.
Status: current	Access: read-create
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1StrVal		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.3
The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.4
The type of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2StrVal		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.5
The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.6
The type of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3StrVal		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.7
The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.8
The type of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4StrVal		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.9
The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.10
The type of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	IphelpereOption82ASCIIFieldType

iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5StrVal		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.11
The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableDelimiter		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.12
The value of the delimiter that is inserted between the fields in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This value is applicable only, if the option 82 format type is ASCII
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..63)

iphelperDhcpSnoopingOption82FormatASCIIConfigurableStatus		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.44.1.13
This object specifies the status of the entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

alaDhcpClientTrapsDesc		1.3.6.1.4.1.6486.801.1.3.2.23.1
OBJECT IDENTIFIER

alaDhcpClientTrapsObj		1.3.6.1.4.1.6486.801.1.3.2.23.2
OBJECT IDENTIFIER

alaDhcpClientAddressAddTrap		1.3.6.1.4.1.6486.801.1.3.2.23.1.0.1
When new IP address is assigned to DHCP Client interface.
Status: current	Access: read-create
NOTIFICATION-TYPE

alaDhcpClientAddressExpiryTrap		1.3.6.1.4.1.6486.801.1.3.2.23.1.0.2
When the lease time expires or when DHCP client not able to renew/rebind an IP address.
Status: current	Access: read-create
NOTIFICATION-TYPE

alaDhcpClientAddressModifyTrap		1.3.6.1.4.1.6486.801.1.3.2.23.1.0.3
When the dhcp client not able to obtain the existing IP address and new IP address is assigned to the DHCP client.
Status: current	Access: read-create
NOTIFICATION-TYPE

alaDhcpClientAddress		1.3.6.1.4.1.6486.801.1.3.2.23.2.1
This object specifies the current IP address of the DHCP client.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

alaDhcpClientNewAddress		1.3.6.1.4.1.6486.801.1.3.2.23.2.2
This object specifies the new IP address assigned for the DHCP client.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

alcatelIND1UDPRelayMIBCompliance		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.2.1
Compliance statement for UDP Relay
Status: current	Access: accessible-for-notify
MODULE-COMPLIANCE

iphelperGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.1
Collection of objects for the management of parameters of UDP Relay.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

iphelperStatGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.2
Collection of objects for management of statistics for UDP Relay.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

iphelperMiscGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.3
Other independent objects of UDP Relay.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

alaDhcpClientTrapsGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.4
Collection of traps for management of DHCP Client
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

iphelperSourceGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.5
Source filtering status at vlan level
Status: current	Access: accessible-for-notify
OBJECT-GROUP

iphelperOption82FormatASCIIConfigurableGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.6
Collection of objects identifying option-32 for Circuit ID and Remote ID.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

alaDhcpClientTrapObjectsGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.7
Objects used in UDP Relay Notifications
Status: current	Access: accessible-for-notify
OBJECT-GROUP

iphelperxGroup		1.3.6.1.4.1.6486.801.1.2.1.10.9.1.2.1.8
An entry in UDP Relay PortAssociation table
Status: current	Access: accessible-for-notify
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor