ALCATEL-IND1-SNMP-AGENT-MIB

File: ALCATEL-IND1-SNMP-AGENT-MIB.mib (7269 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ALCATEL-IND1-BASE

Imported symbols

OBJECT-TYPE OBJECT-IDENTITY MODULE-IDENTITY
IpAddress TEXTUAL-CONVENTION OBJECT-GROUP
MODULE-COMPLIANCE softentIND1SnmpAgt

Defined Types

SnmpAgtSecurityLevel  
The switch security level
TEXTUAL-CONVENTION    
  INTEGER noSec(1), authSet(2), authAll(3), privSet(4), privAll(5), trapOnly(6)  

Defined Values

alcatelIND1SNMPAgentMIB 1.3.6.1.4.1.6486.801.1.2.1.1.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line SNMP Agent Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1SNMPAgentMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.1.1.1
Branch For SNMP Agent Subsystem Managed Objects.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1SNMPAgentMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.1.1.2
Branch For SNMP Agent Subsystem Conformance Information.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1SNMPAgentMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.1.1.2.1
Branch For SNMP Agent Subsystem Units Of Conformance.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1SNMPAgentMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.1.1.2.2
Branch For SNMP Agent Subsystem Compliance Statements.
Status: current Access: read-only
OBJECT-IDENTITY    

snmpAgtConfig 1.3.6.1.4.1.6486.801.1.2.1.1.1.1.1
OBJECT IDENTIFIER    

snmpAgtSecurityLevel 1.3.6.1.4.1.6486.801.1.2.1.1.1.1.1.1
Level of security required for SNMP get or SET. noSec: no security; all the PDU with a known user id are accepted authSet: authentication required for set; all GET are accepted, but not authenticated SET are rejected. authAll: authentication required for SET and GET; not authenticated SET and GET are rejected. privSet: authentication required for GET and encryption required for SET. privAll: encryption required for SET and GET. trapOnly: no SNMP GET or SET are accepted.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAgtSecurityLevel  

snmpAgtCommunityMode 1.3.6.1.4.1.6486.801.1.2.1.1.1.1.1.2
If the community mode is enabled, the SNMPv1/v2 packets must use the community names.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snmpAgtCtlFiles 1.3.6.1.4.1.6486.801.1.2.1.1.1.1.3
MIB entity on which to attach the MODULE-IDENTITY for the Epilogue(R) control files.
Status: current Access: read-write
OBJECT-IDENTITY    

snmpAgtSourceIpConfig 1.3.6.1.4.1.6486.801.1.2.1.1.1.1.4
The SNMP Agent Configuration 1 -- Default(Loopback0 or closest IP) 2 -- No Loopback0 3 -- Interface IP Specified by User
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(1), noLoopback0(2), ipInterface(3)  

snmpAgtSourceIp 1.3.6.1.4.1.6486.801.1.2.1.1.1.1.5
The Source IP of SNMP Packets
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

alcatelIND1SNMPAgentMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.1.1.2.2.1
Compliance statement for SNMP Agent Subsystem.
Status: current Access: read-write
MODULE-COMPLIANCE    

snmpAgtConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.1.1.2.1.1
Collection of objects for SNMP Agent configuration.
Status: current Access: read-write
OBJECT-GROUP