ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB

File: ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB.mib (34443 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB IF-MIB ALCATEL-IND1-BASE
SFLOW-MIB INET-ADDRESS-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
Integer32 NOTIFICATION-TYPE MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP TEXTUAL-CONVENTION
RowStatus SnmpAdminString InterfaceIndex
softentIND1PortMirroringMonitoring sFlowFsEntry sFlowCpEntry
InetAddress InetAddressType

Defined Types

MirrorEntry  
SEQUENCE    
  mirrorSessionNumber Integer32
  mirrorMirroredIfindex InterfaceIndex
  mirrorMirroringIfindex InterfaceIndex
  mirrorStatus INTEGER
  mirrorUnblockedVLAN Integer32
  mirrorRowStatus RowStatus
  mirrorDirection INTEGER
  mirrorSessOperStatus INTEGER
  mirrorTaggedVLAN Integer32

MirrorSrcEntry  
SEQUENCE    
  mirrorSrcMirroredIf InterfaceIndex
  mirrorSrcStatus INTEGER
  mirrorSrcDirection INTEGER
  mirrorSrcRowStatus RowStatus
  mirrorSrcOperStatus INTEGER

MonitorEntry  
SEQUENCE    
  monitorSessionNumber Integer32
  monitorIfindex InterfaceIndex
  monitorFileStatus INTEGER
  monitorFileName SnmpAdminString
  monitorFileSize Integer32
  monitorScreenStatus INTEGER
  monitorScreenLine Integer32
  monitorTrafficType INTEGER
  monitorStatus INTEGER
  monitorFileOverWrite INTEGER
  monitorDirection INTEGER
  monitorTimeout Integer32
  monitorRowStatus RowStatus
  monitorCaptureType INTEGER

MirMonErrorIds  
This data type is used to define the different type of error occured while configuring Mirroring/Monitoring.
TEXTUAL-CONVENTION    
  INTEGER other(1), wrongSession(2), hwQError(3), swQError(4)  

AlaSFlowFsEntry  
SEQUENCE    
  alasFlowFsDeleteEntry INTEGER

AlaSFlowCpEntry  
SEQUENCE    
  alasFlowCpDeleteEntry INTEGER

Defined Values

alcatelIND1PortMirrorMonitoringMIB 1.3.6.1.4.1.6486.801.1.2.1.19.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Port Mirroring and Monitoring for mirroring/monitoring session control The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1PortMirMonMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.19.1.0
Root For Port Mirroring and Monitoring Subsystem Managed Notifications.
OBJECT-IDENTITY    

alcatelIND1PortMirMonMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.19.1.1
Branch For Port Mirroring and Monitoring Subsystem Managed Objects.
OBJECT-IDENTITY    

alcatelIND1PortMirMonMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.19.1.2
Branch For Port Mirroring and Monitoring Subsystem Conformance Information.
OBJECT-IDENTITY    

alcatelIND1PortMirMonMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1
Branch For Port Mirroring and Monitoring Subsystem Units Of Conformance.
OBJECT-IDENTITY    

alcatelIND1PortMirMonMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.2
Branch For Port Mirroring and Monitoring Subsystem Compliance Statements.
OBJECT-IDENTITY    

mirmonMirroring 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1
OBJECT IDENTIFIER    

mirrorTable 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1
A list of port mirroring instances.
OBJECT-TYPE    
  SEQUENCE OF  
    MirrorEntry

mirrorEntry 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1
A port mirroring entry.
OBJECT-TYPE    
  MirrorEntry  

mirrorSessionNumber 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.1
Identifies a specific port mirroring instance.
OBJECT-TYPE    
  Integer32 1..2147483647  

mirrorMirroredIfindex 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.2
This variable is deprecated and value will be ignored. Please use mirrorSrcTable to configure mirrored ports. The physical identification number for this mirroring port instance (mirrorred port).
OBJECT-TYPE    
  InterfaceIndex  

mirrorMirroringIfindex 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.3
The physical identification number for this mirroring port instance (mirroring port).
OBJECT-TYPE    
  InterfaceIndex  

mirrorStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.4
Whether mirroring is enabled or disabled for this port. Prior to enabling mirroring, or at the same time all other read write values in this table for the same row must be set to appropriate values, or defaults will be assumed.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mirrorUnblockedVLAN 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.5
A VLAN identifier which specifies the VLAN identifier that must remain unblocked no matter what is the output of the spanning tree algorithm.Value 0 indicates this parameter is not set
OBJECT-TYPE    
  Integer32 0..4094  

mirrorRowStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

mirrorDirection 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.7
This variable is deprecated and the value will be ignored. Please use mirrorSrcTable to set the direction of mirroring. Direction of mirroring.
OBJECT-TYPE    
  INTEGER inport(1), outport(2), bidirectional(3)  

mirrorSessOperStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.8
Whether mirroring session is active.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mirrorTaggedVLAN 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.9
A VLAN identifier which specifies the VLAN identifier that must used to tag the mirrored packets going out of the MTP for remote port mirroring .Value 0 indicates this parameter is not set
OBJECT-TYPE    
  Integer32 0..4094  

mirrorSrcTable 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2
A list of port mirroring instances.
OBJECT-TYPE    
  SEQUENCE OF  
    MirrorSrcEntry

mirrorSrcEntry 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1
A port mirroring entry.
OBJECT-TYPE    
  MirrorSrcEntry  

mirrorSrcMirroredIf 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.1
The physical identification number for this mirroring port instance (mirrorred port).
OBJECT-TYPE    
  InterfaceIndex  

mirrorSrcStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.2
Whether mirroring is enabled or disabled for this port. Prior to enabling mirroring, or at the same time all other read write values in this table for the same row must be set to appropriate values, or defaults will be assumed.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mirrorSrcDirection 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.3
Direction of mirroring on the source port of this entry.
OBJECT-TYPE    
  INTEGER inport(1), outport(2), bidirectional(3)  

mirrorSrcRowStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.4
The status of this table entry.Row Status to control creation, modification and deletion of this entry.
OBJECT-TYPE    
  RowStatus  

mirrorSrcOperStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.5
The mirroring operational status of this mirrored source.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mirmonMonitoring 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2
OBJECT IDENTIFIER    

monitorTable 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1
A list of port monitoring instances.
OBJECT-TYPE    
  SEQUENCE OF  
    MonitorEntry

monitorEntry 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1
A port monitoring entry.
OBJECT-TYPE    
  MonitorEntry  

monitorSessionNumber 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.1
Identifies a specific port monitoring instance.
OBJECT-TYPE    
  Integer32 1..2147483647  

monitorIfindex 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.2
The physical identification number for this monitoring port instance.
OBJECT-TYPE    
  InterfaceIndex  

monitorFileStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.3
The status of the file option of a monitoring port instance (default off)
OBJECT-TYPE    
  INTEGER off(1), on(2)  

monitorFileName 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.4
The name of the file in which the traffic will be stored (default PMONITOR.ENC).
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

monitorFileSize 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.5
The number of 65536 ( 64K ) bytes allowed for the file. The file contains only the last monitorFileSize bytes of the current port monitoring instance (default 65536 bytes).
OBJECT-TYPE    
  Integer32 1..32  

monitorScreenStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.6
The status of the screen option of a monitoring port instance (default off)
OBJECT-TYPE    
  INTEGER off(1), on(2)  

monitorScreenLine 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.7
The number of lines used when the screen option is activated (default 24)
OBJECT-TYPE    
  Integer32 1..100  

monitorTrafficType 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.8
The type of traffic being monitored (default all)
OBJECT-TYPE    
  INTEGER all(1), unicast(2), multicast(3), broadcast(4), unimulti(5), unibroad(6), multibroad(7)  

monitorStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.9
The status of the port monitoring instance
OBJECT-TYPE    
  INTEGER off(1), on(2), suspended(3)  

monitorFileOverWrite 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.10
The status of the File Over Write option of a monitoring port instance (default on)
OBJECT-TYPE    
  INTEGER off(1), on(2)  

monitorDirection 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.11
Direction of monitoring.
OBJECT-TYPE    
  INTEGER inport(1), outport(2), bidirectional(3)  

monitorTimeout 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.12
The number of seconds allowed for this session before the session gets deleted. (default:forever 0 second).
OBJECT-TYPE    
  Integer32 0..2147483647  

monitorRowStatus 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.13
The status of this table entry. Create,Delete and Modify.
OBJECT-TYPE    
  RowStatus  

monitorCaptureType 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.14
The number of bytes per packet allowed to capture .(brief: 64 bytes, full: Entire packet).
OBJECT-TYPE    
  INTEGER brief(1), full(2)  

mirmonNotificationVars 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3
OBJECT IDENTIFIER    

mirmonPrimarySlot 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.1
Slot of mirrored or monitored interface.
OBJECT-TYPE    
  Integer32 1..16  

mirmonPrimaryPort 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.2
Port of mirrored or monitored interface.
OBJECT-TYPE    
  Integer32 1..128  

mirroringSlot 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.3
Slot of mirroring interface.
OBJECT-TYPE    
  Integer32 1..16  

mirroringPort 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.4
Port of mirroring interface.
OBJECT-TYPE    
  Integer32 1..128  

mirMonSession 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.5
The Mirroring session number.
OBJECT-TYPE    
  Integer32 1..2147483647  

mirMonError 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.6
The Error returned by the NI which failed to configure Mirroring/Monitoring
OBJECT-TYPE    
  MirMonErrorIds  

mirMonErrorNi 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.3.7
The NI slot number.
OBJECT-TYPE    
  Integer32 1..16  

mirrorConfigError 1.3.6.1.4.1.6486.801.1.2.1.19.1.0.1
The Mirroring Configuration failed on NI. This trap is sent when any NI fails to configure mirroring. Due to this error, port mirroring session will be terminated.
NOTIFICATION-TYPE    

monitorFileWritten 1.3.6.1.4.1.6486.801.1.2.1.19.1.0.2
A File Written Trap is sent when the amount of data requested by the user has been written by the port monitoring instance.
NOTIFICATION-TYPE    

mirrorUnlikeNi 1.3.6.1.4.1.6486.801.1.2.1.19.1.0.3
The Mirroring Configuration is deleted due to the swapping of different NI board type. Port Mirroring session which was active on a slot,cannot continue with the insertion of different NI type in the same slot.
NOTIFICATION-TYPE    

mirmonSFlowObjects 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4
OBJECT IDENTIFIER    

alasFlowFsTable 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1
A table of the flow samplers within a device.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaSFlowFsEntry

alasFlowFsEntry 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1.1
Attributes of a flow sampler.
OBJECT-TYPE    
  AlaSFlowFsEntry  

alasFlowFsDeleteEntry 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1.1.1
The object is used to delete entries in the sFlowFsTable. Only value 6 is supported.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), delete(6)  

alasFlowCpTable 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2
A table of the flow samplers within a device.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaSFlowCpEntry

alasFlowCpEntry 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2.1
Attributes of a flow sampler.
OBJECT-TYPE    
  AlaSFlowCpEntry  

alasFlowCpDeleteEntry 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2.1.1
The object is used to delete entries in the sFlowCpTable. Only value 6 is supported.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), delete(6)  

alasFlowAgentConfigType 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.3
The Agent Config Information 1 -- Default 2 -- sFlow Interface IP Specified by User
OBJECT-TYPE    
  INTEGER default(1), user(2)  

alasFlowAgentAddressType 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.4
The address type of the address associated with this agent. Only ipv4 and ipv6 types are supported.
OBJECT-TYPE    
  InetAddressType  

alasFlowAgentAddress 1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.5
The IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not change as interfaces are reconfigured, enabled, disabled, added or removed. A manager should be able to use the sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can be maintained.
OBJECT-TYPE    
  InetAddress  

alcatelIND1PortMirMonMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.2.1
Compliance statement for Port Mirroring and Monitoring.
MODULE-COMPLIANCE    

portMirroringGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.1
Collection of objects for management of Port Mirroring.
OBJECT-GROUP    

portMonitoringGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.2
Collection of objects for management of Port Monitoring.
OBJECT-GROUP    

portNotificationVarsGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.3
Collection of objects which appear only in notifications.
OBJECT-GROUP    

mirmonTrapsGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.4
Collection of Traps for port mirroring and monitoring.
NOTIFICATION-GROUP    

sFlowAgentGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.5
Collection of objects for sFlow agent configuration.
OBJECT-GROUP    

portMirrorGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.6
Collection of objects for Mirror configuration.
OBJECT-GROUP    

portSFlowCpGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.7
Collection of objects for sFlow Cp configuration.
OBJECT-GROUP    

portSFlowFsGroup 1.3.6.1.4.1.6486.801.1.2.1.19.1.2.1.8
Collection of objects for sFlow Fs configuration.
OBJECT-GROUP