ALCATEL-IND1-OSPF3-MIB

File: ALCATEL-IND1-OSPF3-MIB.mib (6800 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF ALCATEL-IND1-BASE

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 MODULE-COMPLIANCE OBJECT-GROUP
routingIND1Ospf3

Defined Values

alcatelIND1OSPF3MIB 1.3.6.1.4.1.6486.801.1.2.1.10.13.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of OSPFv3 global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, o r consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2003 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1OSPF3MIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1
OBJECT IDENTIFIER    

alaProtocolOspf3 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1
OBJECT IDENTIFIER    

alaOspf3OrigRouteTag 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.1
Route tag that is originated with ASEs
OBJECT-TYPE    
  Unsigned32  

alaOspf3TimerSpfDelay 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.2
Delay (in seconds) between topology change and SPF run
OBJECT-TYPE    
  Integer32 0..65535  

alaOspf3TimerSpfHold 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.3
Delay (in seconds) between subsequent SPF executions
OBJECT-TYPE    
  Integer32 0..65535  

alaOspf3RestartHelperSupport 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.4
This router can be a helper to another restarting router
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaOspf3RestartStrictLsaChecking 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.5
Will changed LSA result in restart termination
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaOspf3RestartInitiate 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.6
Start a graceful restart
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaOspf3MTUCheck 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.7
Verify the MTU of a neighbor matches our own.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alcatelIND1OSPF3MIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2
OBJECT IDENTIFIER    

alcatelIND1OSPF3MIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.1
OBJECT IDENTIFIER    

alcatelIND1OSPF3MIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2
OBJECT IDENTIFIER    

alcatelIND1OSPF3MIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.1.1
The compliance statement for OSPFv3 and implementing the ALCATEL-IND1-OSPF3 MIB.
MODULE-COMPLIANCE    

alaOSPF3ConfigMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.1
A collection of objects to support management of OSPF3.
OBJECT-GROUP