ALCATEL-IND1-LBD-MIB

File: ALCATEL-IND1-LBD-MIB.mib (19676 bytes)

Imported modules

SNMPv2-SMI IF-MIB ALCATEL-IND1-BASE
SNMPv2-TC SNMPv2-CONF

Imported symbols

Unsigned32 Counter32 MODULE-IDENTITY
NOTIFICATION-TYPE OBJECT-TYPE OBJECT-IDENTITY
InterfaceIndex softentIND1Lbd alaLbdTraps
TEXTUAL-CONVENTION MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP

Defined Types

AlaLbdPortConfigLbdOperStatus  
TEXTUAL-CONVENTION    
  current INTEGER inactive(0), normal(1), shutdown(2)

AlaLbdCurrentStateCVAorAR  
TEXTUAL-CONVENTION    
  current INTEGER inactive(0), normal(1)

AlaLbdPortConfigEntry  
SEQUENCE    
  alaLbdPortConfigIfIndex InterfaceIndex
  alaLbdPortConfigLbdAdminStatus INTEGER
  alaLbdPortConfigLbdOperStatus AlaLbdPortConfigLbdOperStatus

AlaLbdPortStatsEntry  
SEQUENCE    
  alaLbdPortStatsIfIndex InterfaceIndex
  alaLbdPortNumLbdInvalidRcvd Counter32
  alaLbdPortLbdSent Counter32
  alaLbdPortStatsClear INTEGER

Defined Values

alcatelIND1LBDMIB 1.3.6.1.4.1.6486.801.1.2.1.56.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line LBD for detection loopback. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1LBDMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.56.1.1
Branch For Loopback-Detection Subsystem Managed Objects.
OBJECT-IDENTITY    

alcatelIND1LBDMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.56.1.2
Branch for LBD Module MIB Subsystem Conformance Information.
OBJECT-IDENTITY    

alcatelIND1LBDMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1
Branch for LBD Module MIB Subsystem Units of Conformance.
OBJECT-IDENTITY    

alcatelIND1LBDMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2
Branch for LBD Module MIB Subsystem Compliance Statements.
OBJECT-IDENTITY    

alaLbdGlobalConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1
This object is used to enable or disable LBD on the switch. The value enable (1) indicates that LBD should be enabled on the switch. The value disable (2) is used to disable LBD on the switch.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaLbdGlobalConfigTransmissionTimer 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2
This object is used to set the transmission timer for LBD feature globally. It is allowed to modify the timer at any instance but the new timer value will be effective from next time the timer restarts.
OBJECT-TYPE    
  Unsigned32 5..600  

alaLbdGlobalClearPortStat 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3
Defines the global clear statistics control for port for LBD. default(0) - default value for this object, reset(1) - indicates that LBD should clear all statistic counters related to all ports in the system.
OBJECT-TYPE    
  INTEGER default(0), reset(1)  

alaLbdGlobalConfigAutorecoveryTimer 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4
This object is used to make up all the disabled ports which was caused due to loop-back detection.
OBJECT-TYPE    
  Unsigned32 30..86400  

alaLbdPortConfig 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5
OBJECT IDENTIFIER    

alaLbdPortConfigTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1
A table containing LBD user port configuration information.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaLbdPortConfigEntry

alaLbdPortConfigEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1
A LBD user port configuration entry.
OBJECT-TYPE    
  AlaLbdPortConfigEntry  

alaLbdPortConfigIfIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.1
The physical identification number for this port.
OBJECT-TYPE    
  InterfaceIndex  

alaLbdPortConfigLbdAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.2
This object is used to enable or disable loopback-detection per port. The value enable(1) indicates that loopback-detection is enabled on this port. The value disable(2) indicates that loopback-detection is disabled on this port. The LBD configuration per port can be applied and retained, irrespective of value of alaLbdGlobalConfigStatus, but the same shall be functionally unavailable when alaLbdGlobalConfigStatus is set to disable(2).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaLbdPortConfigLbdOperStatus 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.3
This object specifies the current operational state of the corresponding port.
OBJECT-TYPE    
  AlaLbdPortConfigLbdOperStatus  

alaLbdPortStat 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6
OBJECT IDENTIFIER    

alaLbdPortStatsTable 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1
A table containing Loop Back Detection information.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaLbdPortStatsEntry

alaLbdPortStatsEntry 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1
A LBD Statistics entry on per port.
OBJECT-TYPE    
  AlaLbdPortStatsEntry  

alaLbdPortStatsIfIndex 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.1
The ifindex of the port on which LBD is running.
OBJECT-TYPE    
  InterfaceIndex  

alaLbdPortNumLbdInvalidRcvd 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.2
Number of Invalid packets received by a port.
OBJECT-TYPE    
  Counter32  

alaLbdPortLbdSent 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.3
Number of LBD packets sent by a port.
OBJECT-TYPE    
  Counter32  

alaLbdPortStatsClear 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.4
When this object is set to reset(1), all statistics parameters corresponding to this port gets cleared (reset).
OBJECT-TYPE    
  INTEGER default(0), reset(1)  

alaLbdTrapsDesc 1.3.6.1.4.1.6486.801.1.3.2.22.1
OBJECT IDENTIFIER    

alaLbdTrapsObj 1.3.6.1.4.1.6486.801.1.3.2.22.2
OBJECT IDENTIFIER    

alaLbdTrapsRoot 1.3.6.1.4.1.6486.801.1.3.2.22.1.0
OBJECT IDENTIFIER    

alaLbdStateChangeToShutdown 1.3.6.1.4.1.6486.801.1.3.2.22.1.0.1
When the port state becomes shutdown, a notification is sent to the Management Entity with the LBD-state information.
NOTIFICATION-TYPE    

alaLbdStateChangeForClearViolationAll 1.3.6.1.4.1.6486.801.1.3.2.22.1.0.2
When the the port state changes from shutdown due to clear-violation-all, a notification is sent to the Management Entity, with the LBD-state information.
NOTIFICATION-TYPE    

alaLbdStateChangeForAutoRecovery 1.3.6.1.4.1.6486.801.1.3.2.22.1.0.3
When the port state changes from shutdown due to auto-recovery mechanism, a notification is sent to the Management Entity with the LBD-state information.
NOTIFICATION-TYPE    

alaLbdPortIfIndex 1.3.6.1.4.1.6486.801.1.3.2.22.2.1
The ifIndex of the port on which LBD trap is raised
OBJECT-TYPE    
  InterfaceIndex  

alaLbdPreviousState 1.3.6.1.4.1.6486.801.1.3.2.22.2.2
The previous state of the port on which LBD was running.
OBJECT-TYPE    
  INTEGER normal(1)  

alaLbdCurrentState 1.3.6.1.4.1.6486.801.1.3.2.22.2.3
The current state of the port on which LBD was running.
OBJECT-TYPE    
  INTEGER shutdown(1)  

alaLbdPreviousStateClearViolationAll 1.3.6.1.4.1.6486.801.1.3.2.22.2.4
The state of the the port where LBD was running before clear-violation-all applied.
OBJECT-TYPE    
  INTEGER shutdown(1)  

alaLbdCurrentStateClearViolationAll 1.3.6.1.4.1.6486.801.1.3.2.22.2.5
The state of the the port where LBD was running after clear-violation-all applied.
OBJECT-TYPE    
  AlaLbdCurrentStateCVAorAR  

alaLbdPreviousStateAutoRecovery 1.3.6.1.4.1.6486.801.1.3.2.22.2.6
The state of the the port where LBD was running before auto-recovery.
OBJECT-TYPE    
  INTEGER shutdown(1)  

alaLbdCurrentStateAutoRecovery 1.3.6.1.4.1.6486.801.1.3.2.22.2.7
The state of the the port where LBD was running after auto-recovery.
OBJECT-TYPE    
  AlaLbdCurrentStateCVAorAR  

alcatelIND1LBDMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2.1
Compliance statement for LBD.
MODULE-COMPLIANCE    

alaLbdGlobalConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.1
Collection of objects for management of LBD Global Configuration.
OBJECT-GROUP    

alaLbdIntfConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.2
Collection of objects for management of LBD per port Configuration.
OBJECT-GROUP    

alaLbdPortStatusGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.3
Collection of objects for LBD Statistics information.
OBJECT-GROUP    

alaLbdStateTrapToShutdownGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.4
Collection of objects for LBD State change to shutdown Traps .
OBJECT-GROUP    

alaLbdStateTrapForClearViolationAllGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.5
Collection of objects for LBD State Traps due to issuing clear-violation-all.
OBJECT-GROUP    

alaLbdStateTrapForAutoRecoveryGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.6
Collection of objects for LBD State Traps due to auto-recovery mechanism.
OBJECT-GROUP    

alaLbdTrapsGroup 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.7
Tok_String
NOTIFICATION-GROUP