ALCATEL-IND1-LAG-MIB

File: ALCATEL-IND1-LAG-MIB.mib (95852 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
SNMPv2-CONF IF-MIB Q-BRIDGE-MIB
IEEE8023-LAG-MIB ALCATEL-IND1-BASE

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Counter32 Integer32
TimeTicks MacAddress TEXTUAL-CONVENTION
RowStatus SnmpAdminString MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP InterfaceIndex
PortList LacpKey LacpState
ChurnState softentIND1LnkAgg

Defined Types

LacpType  
The object supports or not (Omnichannel) the LACP protocol .
TEXTUAL-CONVENTION    
  INTEGER lacpOff(0), lacpOn(1)  

McLagType  
The object supports or not the Multi Chassis Link aggregation .
TEXTUAL-CONVENTION    
  INTEGER mcLagOff(0), mcLagOn(1)  

AlclnkaggAggEntry  
SEQUENCE    
  alclnkaggAggIndex InterfaceIndex
  alclnkaggAggMACAddress MacAddress
  alclnkaggAggActorSystemPriority Integer32
  alclnkaggAggActorSystemID MacAddress
  alclnkaggAggPartnerAdminKey LacpKey
  alclnkaggAggActorAdminKey LacpKey
  alclnkaggAggActorOperKey LacpKey
  alclnkaggAggPartnerSystemID MacAddress
  alclnkaggAggPartnerSystemPriority Integer32
  alclnkaggAggPartnerOperKey LacpKey
  alclnkaggAggSize Integer32
  alclnkaggAggNumber Integer32
  alclnkaggAggDescr SnmpAdminString
  alclnkaggAggName SnmpAdminString
  alclnkaggAggLacpType LacpType
  alclnkaggAggAdminState INTEGER
  alclnkaggAggOperState INTEGER
  alclnkaggAggNbrSelectedPorts Integer32
  alclnkaggAggNbrAttachedPorts Integer32
  alclnkaggAggPrimaryPortIndex InterfaceIndex
  alclnkaggAggPrimaryPortPosition Integer32
  alclnkaggAggRowStatus RowStatus
  alclnkaggAggMcLagType McLagType
  alclnkaggAggPortSelectionHash INTEGER
  alclnkaggAggWTRTimer Integer32

AlclnkaggAggPortListEntry  
SEQUENCE    
  alclnkaggAggPortListPorts PortList

AlclnkaggAggPortEntry  
SEQUENCE    
  alclnkaggAggPortIndex InterfaceIndex
  alclnkaggAggPortActorSystemPriority Integer32
  alclnkaggAggPortActorSystemID MacAddress
  alclnkaggAggPortActorAdminKey LacpKey
  alclnkaggAggPortActorOperKey LacpKey
  alclnkaggAggPortPartnerAdminSystemPriority Integer32
  alclnkaggAggPortPartnerOperSystemPriority Integer32
  alclnkaggAggPortPartnerAdminSystemID MacAddress
  alclnkaggAggPortPartnerOperSystemID MacAddress
  alclnkaggAggPortPartnerAdminKey LacpKey
  alclnkaggAggPortPartnerOperKey LacpKey
  alclnkaggAggPortSelectedAggID InterfaceIndex
  alclnkaggAggPortAttachedAggID InterfaceIndex
  alclnkaggAggPortActorPort Integer32
  alclnkaggAggPortActorPortPriority Integer32
  alclnkaggAggPortPartnerAdminPort Integer32
  alclnkaggAggPortPartnerOperPort Integer32
  alclnkaggAggPortPartnerAdminPortPriority Integer32
  alclnkaggAggPortPartnerOperPortPriority Integer32
  alclnkaggAggPortActorAdminState LacpState
  alclnkaggAggPortActorOperState LacpState
  alclnkaggAggPortPartnerAdminState LacpState
  alclnkaggAggPortPartnerOperState LacpState
  alclnkaggAggPortSelectedAggNumber Integer32
  alclnkaggAggPortGlobalPortNumber Integer32
  alclnkaggAggPortAdminState INTEGER
  alclnkaggAggPortOperState INTEGER
  alclnkaggAggPortState INTEGER
  alclnkaggAggPortLinkState INTEGER
  alclnkaggAggPortPrimary INTEGER
  alclnkaggAggPortLacpType LacpType
  alclnkaggAggPortRowStatus RowStatus
  alclnkaggAggPortMcLagType McLagType

AlclnkaggAggPortStatsEntry  
SEQUENCE    
  alclnkaggAggPortStatsLACPDUsRx Counter32
  alclnkaggAggPortStatsMarkerPDUsRx Counter32
  alclnkaggAggPortStatsMarkerResponsePDUsRx Counter32
  alclnkaggAggPortStatsUnknownRx Counter32
  alclnkaggAggPortStatsIllegalRx Counter32
  alclnkaggAggPortStatsLACPDUsTx Counter32
  alclnkaggAggPortStatsMarkerPDUsTx Counter32
  alclnkaggAggPortStatsMarkerResponsePDUsTx Counter32

AlclnkaggAggPortDebugEntry  
SEQUENCE    
  alclnkaggAggPortDebugRxState INTEGER
  alclnkaggAggPortDebugLastRxTime TimeTicks
  alclnkaggAggPortDebugMuxState INTEGER
  alclnkaggAggPortDebugMuxReason SnmpAdminString
  alclnkaggAggPortDebugActorChurnState ChurnState
  alclnkaggAggPortDebugPartnerChurnState ChurnState
  alclnkaggAggPortDebugActorChurnCount Counter32
  alclnkaggAggPortDebugPartnerChurnCount Counter32
  alclnkaggAggPortDebugActorSyncTransitionCount Counter32
  alclnkaggAggPortDebugPartnerSyncTransitionCount Counter32
  alclnkaggAggPortDebugActorChangeCount Counter32
  alclnkaggAggPortDebugPartnerChangeCount Counter32

AlclnkaggAggIdIfIndexEntry  
SEQUENCE    
  alclnkaggIfIndex Integer32
  alclnkaggAggId Integer32

Defined Values

alcatelIND1LAGMIB 1.3.6.1.4.1.6486.801.1.2.1.13.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Link Aggregation module for managing ALCATEL FALCON product This MIB is an image of the 802.3ad standard. The aim of this proprietary MIB is to allow the creation of aggregate objects with their size. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1LAGMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.13.1.0
Branch For LAG MIB Subsystem Notifications.
OBJECT-IDENTITY    

alcatelIND1LAGMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.13.1.1
OBJECT IDENTIFIER    

alclnkaggAgg 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1
OBJECT IDENTIFIER    

alclnkaggAggPort 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2
OBJECT IDENTIFIER    

alclnkaggTablesLastChanged 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.3
This object indicates the time of the most recent change to the alclnkaggAggTable, alclnkaggAggPortListTable, or alclnkaggAggPortTable.
OBJECT-TYPE    
  TimeTicks  

alclnkaggAggTable 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1
A table that contains information about every Aggregator that is associated with this System. To create specify alclnkaggAggIndex,alclnkaggAggSize and alclnkaggAggLacpType.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggEntry

alclnkaggAggEntry 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1
A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator.
OBJECT-TYPE    
  AlclnkaggAggEntry  

alclnkaggAggIndex 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.1
The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only.
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggMACAddress 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.2
A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggActorSystemPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.3
A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
OBJECT-TYPE    
  Integer32 0..65535  

alclnkaggAggActorSystemID 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.4
A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed. objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see ).
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPartnerAdminKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.5
The current Administrative value of the Key accepted for the Aggregator's current protocol Partner. Optional this is a 16-bit read-write value. If the aggregation is manually configured, this Key value will be a value assigned by the local System. The administrative Key value may differ from the operational
OBJECT-TYPE    
  LacpKey  

alclnkaggAggActorAdminKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.6
The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit, read-write value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggActorOperKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.7
The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPartnerSystemID 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.8
A 6-octet read-write MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPartnerSystemPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.9
A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.
OBJECT-TYPE    
  Integer32 0..65535  

alclnkaggAggPartnerOperKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.10
The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read- write value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggSize 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.11
Maximum number of links that could be attached to this aggregator, This nominator is mandatory and is a required field in order to create a row in this table
OBJECT-TYPE    
  Integer32 1..16  

alclnkaggAggNumber 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.12
Aggreagtor number reference the aggregate dedicated from the ifindex at the creation
OBJECT-TYPE    
  Integer32 0..127  

alclnkaggAggDescr 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.13
Description is a human readable string which describes of the type of aggregator object OMNICHANNEL / LACP etc
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alclnkaggAggName 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.14
Name of the aggregator is human readable string manually given by the operator
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alclnkaggAggLacpType 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.15
Aggreagtor set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the aggregator, cannot be modified later
OBJECT-TYPE    
  LacpType  

alclnkaggAggAdminState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.16
status assigned by the admnistrator. The activation of the aggregator is managed by this nominator
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggAggOperState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.17
Operational status of the aggregator with proprietary values operational state from iftable corresponds to UP state
OBJECT-TYPE    
  INTEGER up(1), down(2), logicPortCreatFailed(3), qReservationFailed(4)  

alclnkaggAggNbrSelectedPorts 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.18
The number of ports selected at the momemt .
OBJECT-TYPE    
  Integer32 0..16  

alclnkaggAggNbrAttachedPorts 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.19
The number of ports attached at the momemt .
OBJECT-TYPE    
  Integer32 0..16  

alclnkaggAggPrimaryPortIndex 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.20
the ifindex of the primary port in the aggregator used to send BPDUs and flooding frames Zeo indicates no primary port is available .
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPrimaryPortPosition 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.21
the port index number in the aggregator used to send BPDUs and flooding frames .
OBJECT-TYPE    
  Integer32 -1..15  

alclnkaggAggRowStatus 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.22
This object is the RowStatus (locking flag) for creating or deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType and must be supplied in the request to create a row, it is a required field.
OBJECT-TYPE    
  RowStatus  

alclnkaggAggMcLagType 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.23
Aggregator set with MultiChassis mode or not mandatory at the creation of the aggregator, cannot be modified later
OBJECT-TYPE    
  McLagType  

alclnkaggAggPortSelectionHash 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.24
Port Selection Criteria used to hash one port of the aggregate for a given traffic flow
OBJECT-TYPE    
  INTEGER sourceMac(1), destinationMac(2), sourceDestinationMac(3), sourceIp(4), destinationIp(5), sourceDestinationIp(6), tunnelProtocol(7)  

alclnkaggAggWTRTimer 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.25
This sets the WTR timer value in minutes for an aggregate. The default value is 0 minute. The Default means the WTR is Disabled. When an link comes up, If there is no WTR enabled for this linkagg, bring up the link. If there is a WTR configured for this linkagg, 1.if there are no other links attached to the same linkagg, bypass the WTR and bring up the link immediately. 2. If there are links attached to the same linkagg, start the WTR when the WTR expires,bring up the link.
OBJECT-TYPE    
  Integer32 0..12  

alclnkaggAggPortListTable 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2
A table that contains a list of all the ports associated with each Aggregator.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortListEntry

alclnkaggAggPortListEntry 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2.1
A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator.
OBJECT-TYPE    
  AlclnkaggAggPortListEntry  

alclnkaggAggPortListPorts 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2.1.1
The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.
OBJECT-TYPE    
  PortList  

alclnkaggAggPortTable 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1
A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortEntry

alclnkaggAggPortEntry 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1
A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
OBJECT-TYPE    
  AlclnkaggAggPortEntry  

alclnkaggAggPortIndex 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.1
The ifIndex of the port
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPortActorSystemPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.2
A 2-octet read-write value used to define the priority value associated with the Actor's System ID.
OBJECT-TYPE    
  Integer32 0..255  

alclnkaggAggPortActorSystemID 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.3
A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPortActorAdminKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.4
The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortActorOperKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.5
The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortPartnerAdminSystemPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.6
A 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  Integer32 0..255  

alclnkaggAggPortPartnerOperSystemPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.7
A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner.
OBJECT-TYPE    
  Integer32 0..255  

alclnkaggAggPortPartnerAdminSystemID 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.8
A 6-octet read-write MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPortPartnerOperSystemID 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.9
A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPortPartnerAdminKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.10
The current administrative value of the Key for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortPartnerOperKey 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.11
The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortSelectedAggID 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.12
The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPortAttachedAggID 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.13
The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPortActorPort 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.14
The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.
OBJECT-TYPE    
  Integer32 0..65535  

alclnkaggAggPortActorPortPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.15
The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
OBJECT-TYPE    
  Integer32 0..255  

alclnkaggAggPortPartnerAdminPort 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.16
The current administrative value of the port number for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  Integer32 0..65535  

alclnkaggAggPortPartnerOperPort 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.17
The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.
OBJECT-TYPE    
  Integer32 0..65535  

alclnkaggAggPortPartnerAdminPortPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.18
The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  Integer32 0..255  

alclnkaggAggPortPartnerOperPortPriority 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.19
The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only.
OBJECT-TYPE    
  Integer32 0..255  

alclnkaggAggPortActorAdminState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.20
A string of 8 bits, corresponding to the administrative values of Actor_State () as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-write.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortActorOperState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.21
A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in . This attribute value is read-only.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortPartnerAdminState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.22
A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in . This attribute value is read-write. The assigned value is used in order to achieve manually configured aggregation.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortPartnerOperState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.23
A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in . In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortSelectedAggNumber 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.24
Aggreagtor number to attach a port at its creation mandatory and only used for the Omnichhannel not allowed for LACP (-1) value displayed when it is not significant
OBJECT-TYPE    
  Integer32 -1..127  

alclnkaggAggPortGlobalPortNumber 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.25
Physical reference of the port
OBJECT-TYPE    
  Integer32 0..65535  

alclnkaggAggPortAdminState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.26
status assigned by the admnistrator. port activation done by iftable this nominator is equivalent to ifAdminStatus in ifTable
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggAggPortOperState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.27
Operational status of the port regarding the traffic
OBJECT-TYPE    
  INTEGER up(1), down(2), notAttached(3), notAggregable(4)  

alclnkaggAggPortState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.28
aggregation status of the port
OBJECT-TYPE    
  INTEGER created(1), configurable(2), configured(3), selected(4), reserved(5), attached(6)  

alclnkaggAggPortLinkState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.29
Operational status of the link
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alclnkaggAggPortPrimary 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.30
port primary or not
OBJECT-TYPE    
  INTEGER yes(1), no(2), notSignificant(3)  

alclnkaggAggPortLacpType 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.31
Port set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the port
OBJECT-TYPE    
  LacpType  

alclnkaggAggPortRowStatus 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.32
This object is the RowStatus (locking flag) for creating or deleting aggregatable port objects. alclnkaggAggPortActorAdminKey and alclnkaggAggPortSlotSlice must be supplied in the request to create a row, it is a required field.
OBJECT-TYPE    
  RowStatus  

alclnkaggAggPortMcLagType 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.33
Port set with McLag mode or not
OBJECT-TYPE    
  McLagType  

alclnkaggAggPortStatsTable 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2
A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortStatsEntry

alclnkaggAggPortStatsEntry 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1
A list of Link Aggregation Control Protocol statistics for each port on this device.
OBJECT-TYPE    
  AlclnkaggAggPortStatsEntry  

alclnkaggAggPortStatsLACPDUsRx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.1
The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerPDUsRx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.2
The number of valid Marker PDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerResponsePDUsRx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.3
The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsUnknownRx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.4
The number of frames received that either: - carry the Slow Protocols Ethernet Type value (), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (), but do not carry the Slow Protocols Ethernet Type. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsIllegalRx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.5
The number of frames received that carry the Slow Protocols Ethernet Type value (), but contain a badly formed PDU or an illegal value of Protocol Subtype (). This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsLACPDUsTx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.6
The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerPDUsTx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.7
The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerResponsePDUsTx 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.8
The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugTable 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3
A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortDebugEntry

alclnkaggAggPortDebugEntry 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1
A list of the debug parameters for a port.
OBJECT-TYPE    
  AlclnkaggAggPortDebugEntry  

alclnkaggAggPortDebugRxState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.1
This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine. is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or 'portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only.
OBJECT-TYPE    
  INTEGER current(1), expired(2), defaulted(3), initialize(4), lacpDisabled(5), portDisabled(6)  

alclnkaggAggPortDebugLastRxTime 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.2
The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  TimeTicks  

alclnkaggAggPortDebugMuxState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.3
This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
OBJECT-TYPE    
  INTEGER detached(1), waiting(2), attached(3), collecting(4), distributing(5), collectingDistributing(6)  

alclnkaggAggPortDebugMuxReason 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.4
A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only.
OBJECT-TYPE    
  SnmpAdminString  

alclnkaggAggPortDebugActorChurnState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.5
The state of the Actor Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only.
OBJECT-TYPE    
  ChurnState  

alclnkaggAggPortDebugPartnerChurnState 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.6
The state of the Partner Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only.
OBJECT-TYPE    
  ChurnState  

alclnkaggAggPortDebugActorChurnCount 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.7
Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugPartnerChurnCount 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.8
Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugActorSyncTransitionCount 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.9
Count of the number of times the Actor's Mux state machine () has entered the IN_SYNC state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugPartnerSyncTransitionCount 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.10
Count of the number of times the Partner's Mux state machine () has entered the IN_SYNC state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugActorChangeCount 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.11
Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugPartnerChangeCount 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.12
Count of the number of times the Partner's perception of the LAG ID (see ) for this Aggregation Port has changed. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggIdIfIndexTable 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3
Each row in this table represents the link aggregation aggregate id's corresponding ifIndex.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggIdIfIndexEntry

alclnkaggAggIdIfIndexEntry 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1
Parameters for link aggregation aggregate id relationship to ifIndex.
OBJECT-TYPE    
  AlclnkaggAggIdIfIndexEntry  

alclnkaggIfIndex 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1.1
IfIndex for the given Aggregate ID
OBJECT-TYPE    
  Integer32 1..2147483647  

alclnkaggAggId 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1.2
The aggregate id number.
OBJECT-TYPE    
  Integer32 0..127  

alcatelIND1LAGMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.13.1.2
Branch For Link Aggregation Subsystem Conformance Information.
OBJECT-IDENTITY    

alcatelIND1LAGMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1
Branch For Link Aggregation Subsystem Units Of Conformance.
OBJECT-IDENTITY    

alcatelIND1LAGMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.2
Branch For Link Aggregation Subsystem Compliance Statements.
OBJECT-IDENTITY    

alclnkaggAggGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.1
A collection of objects providing information about an aggregation.
OBJECT-GROUP    

alclnkaggAggPortListGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.2
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

alclnkaggAggPortGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.3
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

alclnkaggAggPortStatsGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.4
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

alclnkaggAggPortDebugGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.5
A collection of objects providing debug information about. every aggregated port.
OBJECT-GROUP    

alclnkaggTablesLastChangedGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.6
A collection of objects providing information about the time of changes to the configuration of aggregations and their ports.
OBJECT-GROUP    

alclnkaggAggCompliance 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.2.1
The compliance statement for device support of Link Aggregation.
MODULE-COMPLIANCE    

lnkaggNotificationVarsGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.7
Collection of objects which appear only in notifications.
OBJECT-GROUP    

lnkaggTrapsGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.8
Collection of Traps for Link Aggregation .
NOTIFICATION-GROUP    

lnkaggNotificationVars 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4
OBJECT IDENTIFIER    

traplnkaggAggId 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4.1
Index Value of Link Aggregation group .
OBJECT-TYPE    
  Integer32 0..32  

traplnkaggPortIfIndex 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4.2
Port of Link Aggregate group .
OBJECT-TYPE    
  Integer32 1..2147483647  

lnkaggAggUp 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.1
The Link Aggregation is active . This trap is sent when any one port of the link aggregation goes to attached state.
NOTIFICATION-TYPE    

lnkaggAggDown 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.2
The Link Aggregation is not active . This trap is sent when all ports of the link aggregation goes out of attached state.
NOTIFICATION-TYPE    

lnkaggPortJoin 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.3
The Link Aggregation port joins the aggregate . This trap is sent when given port of the link aggregation goes to attached state.
NOTIFICATION-TYPE    

lnkaggPortLeave 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.4
The Link Aggregation port leaves the aggregate . This trap is sent when given port of the link aggregation goes out of attached state.
NOTIFICATION-TYPE    

lnkaggPortRemove 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.5
The Link Aggregation port removed from the aggregate . This trap is sent when given port of the link aggregation removed due to invalid configuration .
NOTIFICATION-TYPE    

alclnkaggAggConfig 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5
OBJECT IDENTIFIER    

alclnkAggLocalRangeOperMin 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.1
Minimum value of aggregate currently used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggLocalRangeOperMax 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.2
Maximum value of aggregate currently used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggLocalRangeConfiguredMin 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.3
Minimum value of aggregate configured to be used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggLocalRangeConfiguredMax 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.4
Maximum value of aggregate configured to be used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggPeerRangeOperMin 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.5
Minimum value of aggregate currently used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggPeerRangeOperMax 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.6
Maximum value of aggregate currently used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggPeerRangeConfiguredMin 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.7
Minimum value of aggregate configured to be used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggPeerRangeConfiguredMax 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.8
Maximum value of aggregate configured to be used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggMcLagRangeOperMin 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.9
Minimum value of aggregate currently used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggMcLagRangeOperMax 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.10
Maximum value of aggregate currently used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggMcLagRangeConfiguredMin 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.11
Minimum value of aggregate configured to be used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkAggMcLagRangeConfiguredMax 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.12
Maximum value of aggregate configured to be used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 127. Value -1 indicated none or multi-chassis feature is not enabled.
OBJECT-TYPE    
  Integer32 -1..127  

alclnkaggAggConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.9
A collection of objects providing information about ranges allowed aggregate number values.
OBJECT-GROUP