ALCATEL-IND1-DCBX-MIB

File: ALCATEL-IND1-DCBX-MIB.mib (34053 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB LLDP-EXT-DOT1-V2-MIB IEEE8021-TC-MIB
LLDP-V2-MIB ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB ALCATEL-IND1-BASE

Imported symbols

Unsigned32 Counter64 MODULE-IDENTITY
OBJECT-TYPE OBJECT-IDENTITY NOTIFICATION-TYPE
TruthValue RowStatus TEXTUAL-CONVENTION
OBJECT-GROUP MODULE-COMPLIANCE SnmpAdminString
LldpXdot1dcbxSupportedCapacity LldpXdot1dcbxTrafficClassValue LldpXdot1dcbxTrafficClassBandwidthValue
LldpXdot1dcbxTrafficSelectionAlgorithm LldpXdot1dcbxAppSelector LldpXdot1dcbxAppProtocol
lldpXdot1dcbxAdminApplicationPriorityAEProtocol lldpXdot1dcbxAdminApplicationPriorityAESelector IEEE8021PriorityValue
lldpV2LocPortIfIndex VfcEnableState softentIND1Dcbx

Defined Types

DcbxTrafficFlow  
Indicates the traffic flow 0: Lossy 1: Lossless
TEXTUAL-CONVENTION    
  INTEGER tfLossy(0), tfLossless(1)  

DcbxPriorityTCMap  
Each group of four octets in this string specify a 32-bit Traffic class ID. The IDs are stored in network byte order; i.e. octet N corresponds to the most significant 8 bits of the ID, and octet N+3 correspond to the least significant 8 bits. The list is large enough to hold 8 TC IDs, one per priority. The first first 4 octets represent the first priority.
TEXTUAL-CONVENTION    
  OCTET STRING Size(32)  

DcbxStatus  
Indicates the dcbx status (could be related to hardware) 0: OK 1: PFC Resources Exhausted 2: PFC TLV Mismatch 3: ETS TLV Mismatch 4: PFC and ETS TLV Mismatch
TEXTUAL-CONVENTION    
  INTEGER ok(0), pfcResourcesExhausted(1), pfcTlvMismatch(2), etsTlvMismatch(3), etsPfcTlvMismatch(4)  

DcbxActionTaken  
Indicates the action taken as a result of DcbxStatus 0: No action taken (dcbx might not be operationaly UP) 1: Restored ETS admin config 2: Restored PFC admin config 3: Disabled PFC 4: Restored ETS and PFC admin config 5: Configured local admin 6: Configured local recommended 7: Configured remote admin 8: Configured remote recommended
TEXTUAL-CONVENTION    
  INTEGER na(0), restEtsAdminCfg(1), restPfcAdminCfg(2), disabledPfc(3), restEtsPfcAdminCfg(4), cfgLocalAdmin(5), cfgLocalRecom(6), cfgRemoteAdmin(7), cfgRemoteRecom(8)  

DcbxTCsPresent  
Octet representing the traffic classes present in a particular profile. Each bit represents the presence of the traffic class. The first bit indicates if TC 0 is present, the second bit indicates TC 1, and so forth. Bit value 1 indicates the TC is present. Bit value 0 indicates the TC is not present. Can be used to change the TC numbering.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1)  

DcbxVersion  
Indicates the dcbx version 0: IEEE 1: CEE 2: AUTO
TEXTUAL-CONVENTION    
  INTEGER ieee(0), cee(1), auto(2)  

RemoteDcbxVersion  
Indicates the remote dcbx version 0: IEEE 1: CEE 2: AUTO 3: Unknown
TEXTUAL-CONVENTION    
  INTEGER ieee(0), cee(1), auto(2), unknown(3)  

AlaDcbxDCProfileEntry  
SEQUENCE    
  alaDcbxDCPId Unsigned32
  alaDcbxDCPName SnmpAdminString
  alaDcbxDCPETSTrafficClassesSupported LldpXdot1dcbxSupportedCapacity
  alaDcbxDCPPFCCap LldpXdot1dcbxSupportedCapacity
  alaDcbxDCPPriorityTCMap DcbxPriorityTCMap
  alaDcbxDCPTemplateDCPId Unsigned32
  alaDcbxDCPTemplateDCPName SnmpAdminString
  alaDcbxDCPTCsPresent DcbxTCsPresent
  alaDcbxDCP8023xPauseReady VfcEnableState
  alaDcbxDCPRowStatus RowStatus

AlaDcbxDCPTCEntry  
SEQUENCE    
  alaDcbxDCPTCDCPId Unsigned32
  alaDcbxDCPTCTrafficClass LldpXdot1dcbxTrafficClassValue
  alaDcbxDCPTCDCPName SnmpAdminString
  alaDcbxDCPTCMaximumBandwidth LldpXdot1dcbxTrafficClassBandwidthValue
  alaDcbxDCPTCMinimumBandwidth LldpXdot1dcbxTrafficClassBandwidthValue
  alaDcbxDCPTCPFCLinkDelay Unsigned32
  alaDcbxDCPTCPFCLinkDelayUserModified TruthValue
  alaDcbxDCPTCPFCTrafficFlow DcbxTrafficFlow
  alaDcbxDCPTCPriorityMap Unsigned32
  alaDcbxDCPTCTrafficScheduler LldpXdot1dcbxTrafficSelectionAlgorithm
  alaDcbxDCPTCRecommendedBandwidth LldpXdot1dcbxTrafficClassBandwidthValue
  alaDcbxDCPTCRecommendedTrafficScheduler LldpXdot1dcbxTrafficSelectionAlgorithm

AlaDcbxPortInstanceEntry  
SEQUENCE    
  alaDcbxPIIfIndex Unsigned32
  alaDcbxPIDCBXAdmin VfcEnableState
  alaDcbxPIDCBXOper VfcEnableState
  alaDcbxPIAdminDCPId Unsigned32
  alaDcbxPIAdminDCPName SnmpAdminString
  alaDcbxPILocalModified TruthValue
  alaDcbxPIPFCDefense VfcEnableState
  alaDcbxPIPFCStatsClear VfcEnableState
  alaDcbxPIStatus DcbxStatus
  alaDcbxPIActionTaken DcbxActionTaken
  alaDcbxPIRowStatus RowStatus
  alaDcbxPIDCBXVersion DcbxVersion
  alaDcbxPIDCBXOperVersion DcbxVersion
  alaDcbxPIDCBXRemoteOperVersion RemoteDcbxVersion

AlaDcbxPIPrioEntry  
SEQUENCE    
  alaDcbxPIPrioIfIndex Unsigned32
  alaDcbxPIPrioPriority IEEE8021PriorityValue
  alaDcbxPIPrioTC LldpXdot1dcbxTrafficClassValue
  alaDcbxPIPrioPFCPacketsReceived Counter64
  alaDcbxPIPrioPFCPacketsTransmitted Counter64

AlaDcbxPfcUsageEntry  
SEQUENCE    
  alaDcbxPfcUsageChassisId Unsigned32
  alaDcbxPfcUsagePrioritiesUsed Unsigned32
  alaDcbxPfcUsagePrioritiesReserved Unsigned32
  alaDcbxPfcUsagePrioritiesAvailable Unsigned32

AlaXdot1dcbxAdminApplicationPriorityAppEntry  
SEQUENCE    
  alaXdot1dcbxAdminApplicationPriorityAEPriority IEEE8021PriorityValue
  alaXdot1dcbxAdminApplicationPriorityAppRowStatus RowStatus

Defined Values

alcatelIND1DcbxMIB 1.3.6.1.4.1.6486.801.1.2.1.72.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line System Capability Manager, to allow for system control and limitation setting, of different, features through out the system. Capability manager is a centralized process which provides hardware information and capability to other processes. To optimize the system performance , certain features may be configured to a lower than the hardware limit through capability manager. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2011 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1DcbxMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.72.1.1
Branch For VFC-DCBX Subsystem Managed Objects.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1DcbxMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.72.1.2
Branch For VFC-DCBX Subsystem Conformance Information.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1DcbxMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1
Branch For VFC-DCBX Subsystem Units Of Conformance.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1DcbxMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.2
Branch For VFC-DCBX Subsystem Compliance Statements.
Status: current Access: read-only
OBJECT-IDENTITY    

alaDcbxConfig 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1
OBJECT IDENTIFIER    

alaDcbxConformance 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.2
OBJECT IDENTIFIER    

alaDcbxDCProfileTable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1
A table of Data Center profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDcbxDCProfileEntry

alaDcbxDCProfileEntry 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1
A DCB profile entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDcbxDCProfileEntry  

alaDcbxDCPId 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.1
Identifier of DCB profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

alaDcbxDCPName 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.2
Name of DCB profile.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

alaDcbxDCPETSTrafficClassesSupported 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.3
Indicates the number of traffic classes supported.
Status: current Access: read-only
OBJECT-TYPE    
  LldpXdot1dcbxSupportedCapacity  

alaDcbxDCPPFCCap 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.4
Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled.
Status: current Access: read-only
OBJECT-TYPE    
  LldpXdot1dcbxSupportedCapacity  

alaDcbxDCPPriorityTCMap 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.5
Indicates the priority TC map. All 8 priorities are assigned a TC.
Status: current Access: read-only
OBJECT-TYPE    
  DcbxPriorityTCMap  

alaDcbxDCPTemplateDCPId 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.6
Identifier of Template DCB profile. Used when creating a new profile. The template profile values will be copied to the new profile.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..128  

alaDcbxDCPTemplateDCPName 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.7
Name of Template DCB profile. Used when creating a new profile. The template profile values will be copied to the new profile.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

alaDcbxDCPTCsPresent 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.8
Represents the traffic classes present in this particular profile. Can be used to change the TC numbering. For example, a profile with TCs numbered 0, 1, 2, can be changed to 1, 5, 7. The numbering is assigned in increasing order. The number of TCs specified must match the current number of TCs in the profile.
Status: current Access: read-create
OBJECT-TYPE    
  DcbxTCsPresent  

alaDcbxDCP8023xPauseReady 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.9
Makes a profile pause-ready. Can only be set during profile creation. When enabled, the PFC is lossy for all traffic classes in the profile and they cannot be changed to lossless. Applying this profile to a port will allow the port to have 802.2x pause enabled through the interfaces commands. Can be applied to ports with a standard VFC profile. Can be applied to a DCB port only if pfc willing and pfc tlv bits are disabled.
Status: current Access: read-create
OBJECT-TYPE    
  VfcEnableState  

alaDcbxDCPRowStatus 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.10
alaDcbxDCPRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaDcbxDCPTrafficClassTable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2
A table of Traffic Classes for the DCB Profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDcbxDCPTCEntry

alaDcbxDCPTCEntry 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1
A DCB profile traffic class entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDcbxDCPTCEntry  

alaDcbxDCPTCDCPId 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.1
Identifier of DCB profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

alaDcbxDCPTCTrafficClass 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.2
Indicates the traffic class.
Status: current Access: not-accessible
OBJECT-TYPE    
  LldpXdot1dcbxTrafficClassValue  

alaDcbxDCPTCDCPName 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.3
Name of DCB profile.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

alaDcbxDCPTCMaximumBandwidth 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.4
Indicates the max bandwidth assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  LldpXdot1dcbxTrafficClassBandwidthValue  

alaDcbxDCPTCMinimumBandwidth 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.5
Indicates the min bandwidth assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  LldpXdot1dcbxTrafficClassBandwidthValue  

alaDcbxDCPTCPFCLinkDelay 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.6
PFC link delay allowance. Default for a lossy TC is 0 and cannot be any other value. Default for a lossless TC is 52 and can be changed in a valid range (10-100).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 10..100  

alaDcbxDCPTCPFCLinkDelayUserModified 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.7
Indicates if the Link Delay value has been modified by the user.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

alaDcbxDCPTCPFCTrafficFlow 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.8
Indicates if PFC traffic flow is enabled on this traffic class
Status: current Access: read-write
OBJECT-TYPE    
  DcbxTrafficFlow  

alaDcbxDCPTCPriorityMap 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.9
A bitmap that indicates the priorities assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

alaDcbxDCPTCTrafficScheduler 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.10
Indicates the traffic class scheduler algorithm assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  LldpXdot1dcbxTrafficSelectionAlgorithm  

alaDcbxDCPTCRecommendedBandwidth 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.11
Indicates the recommended min bandwidth assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  LldpXdot1dcbxTrafficClassBandwidthValue  

alaDcbxDCPTCRecommendedTrafficScheduler 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.12
Indicates the recommended traffic class scheduler algorithm assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  LldpXdot1dcbxTrafficSelectionAlgorithm  

alaDcbxPortInstanceTable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3
A table of DCP Port Instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDcbxPortInstanceEntry

alaDcbxPortInstanceEntry 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1
A DCP Port Instance Entry. Creating this entry for a port will change the port mode to DCB, set the default DCB profile (if none is specified), will disable NDCB features, and will create a set of alaDcbxPIPrioEntrys for the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDcbxPortInstanceEntry  

alaDcbxPIIfIndex 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.1
Identifier of DCB profile applied to this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

alaDcbxPIDCBXAdmin 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.2
DCBX Admin State. Enable or Disable all DCBX features on this port.
Status: current Access: read-create
OBJECT-TYPE    
  VfcEnableState  

alaDcbxPIDCBXOper 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.3
DCBX Oper State. Enable or Disable all DCBX features on this port.
Status: current Access: read-only
OBJECT-TYPE    
  VfcEnableState  

alaDcbxPIAdminDCPId 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.4
Identifier of DCB profile applied to this port.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..128  

alaDcbxPIAdminDCPName 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.5
Name of DCB profile applied to this port.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

alaDcbxPILocalModified 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.6
Value is true if local configuration is different from configuration imported from the DCB profile applied to this port.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

alaDcbxPIPFCDefense 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.7
PFC Defense Mode. Applies when PFC negotiation fails. If value is enabled, then PFC becomes disabled but traffic still flows. If the value is disabled, then PFC local configuration remains on the port.
Status: current Access: read-create
OBJECT-TYPE    
  VfcEnableState  

alaDcbxPIPFCStatsClear 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.8
Clear the PFC stats for this port.
Status: current Access: read-create
OBJECT-TYPE    
  VfcEnableState  

alaDcbxPIStatus 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.9
Indicates port status.
Status: current Access: read-only
OBJECT-TYPE    
  DcbxStatus  

alaDcbxPIActionTaken 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.10
Indicates the action taken as a result of the status.
Status: current Access: read-only
OBJECT-TYPE    
  DcbxActionTaken  

alaDcbxPIRowStatus 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.11
Controls the creation and deletion of rows in the alaDcbxPortInstanceTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaDcbxPIDCBXVersion 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.12
DCBX Version selected on this port.
Status: current Access: read-write
OBJECT-TYPE    
  DcbxVersion  

alaDcbxPIDCBXOperVersion 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.13
DCBX Version operating on this port.
Status: current Access: read-only
OBJECT-TYPE    
  DcbxVersion  

alaDcbxPIDCBXRemoteOperVersion 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.14
DCBX Remote Version operating on this port.
Status: current Access: read-only
OBJECT-TYPE    
  RemoteDcbxVersion  

alaDcbxPIPriorityTable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4
A table of Priorities for DCP Port Instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDcbxPIPrioEntry

alaDcbxPIPrioEntry 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1
A DCB profile traffic class entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDcbxPIPrioEntry  

alaDcbxPIPrioIfIndex 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.1
Identifier of DCP Port Instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

alaDcbxPIPrioPriority 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.2
Indicates the priority of the DCP Port Instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PriorityValue  

alaDcbxPIPrioTC 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.3
Indicates the traffic class this priority belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  LldpXdot1dcbxTrafficClassValue  

alaDcbxPIPrioPFCPacketsReceived 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.4
Total PFC received packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaDcbxPIPrioPFCPacketsTransmitted 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.5
Total PFC transmitted packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaDcbxPfcLLPrioritiesUsed 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.5
This object specifies the number of PFC Lossless Priorities in use in the system.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32  

alaDcbxPfcLLPrioritiesReserved 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.6
This object specifies the number of PFC Lossless Priorities in reserved in the system.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32  

alaDcbxPfcLLPrioritiesAvailable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.7
This object specifies the number of Priorities available to be configured as PFC Lossless.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32  

alaDcbxPfcUsageTable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8
A table of chassis entries. Each depicts the pfc priorities available per chassis. Only valid for TOR platform. In Virtual Chassis mode there is an entry per chassis. In non-Virtual Chassis mode, only one entry is present.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDcbxPfcUsageEntry

alaDcbxPfcUsageEntry 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1
A PFC usage class entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDcbxPfcUsageEntry  

alaDcbxPfcUsageChassisId 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.1
Chassis ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

alaDcbxPfcUsagePrioritiesUsed 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.2
This object specifies the number of PFC Lossless Priorities in use.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

alaDcbxPfcUsagePrioritiesReserved 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.3
This object specifies the number of PFC Lossless Priorities reserved.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

alaDcbxPfcUsagePrioritiesAvailable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.4
This object specifies the number of Priorities available to be configured as PFC Lossless.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

alaXdot1dcbxAdminApplicationPriorityAppTable 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9
Table containing entries indicating the status of the corresponding row in lldpXdot1dcbxAdminApplicationPriorityAppTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaXdot1dcbxAdminApplicationPriorityAppEntry

alaXdot1dcbxAdminApplicationPriorityAppEntry 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1
Entry that indicates the rowstatus of application priority entry in lldpXdot1dcbxAdminApplicationPriorityAppTable
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaXdot1dcbxAdminApplicationPriorityAppEntry  

alaXdot1dcbxAdminApplicationPriorityAEPriority 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.1
The priority code point that should be used in frames transporting the protocol indicated by alaXdot1dcbxAdminApplicationPriorityAESelector and alaXdot1dcbxAdminApplicationPriorityAEProtocol
Status: current Access: read-create
OBJECT-TYPE    
  IEEE8021PriorityValue  

alaXdot1dcbxAdminApplicationPriorityAppRowStatus 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.2
This object controls only the deletion of an entry in lldpXdot1dcbxAdminApplicationPriorityAppTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alcatelIND1DcbxMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.2.1
Compliance statement for VFC-DCBX Subsystem.
Status: current Access: read-create
MODULE-COMPLIANCE    

alaDcbxDCProfileGroup 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.1
Collection of DCB Profile for management of DCBX.
Status: current Access: read-create
OBJECT-GROUP    

alaDcbxDCPTrafficClassGroup 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.2
Collection of DCB Profile Traffic Class for management of DCBX.
Status: current Access: read-create
OBJECT-GROUP    

alaDcbxPortInstanceGroup 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.3
Collection of DCP Port Instances for management of DCBX.
Status: current Access: read-create
OBJECT-GROUP    

alaDcbxPortInstancePriorityGroup 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.4
Collection of DCP Port Instance Traffic Class for management of DCBX.
Status: current Access: read-create
OBJECT-GROUP    

alaDcbxPfcUsageGroup 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.5
Collection of PFC Lossless TC Usage Objects.
Status: current Access: read-create
OBJECT-GROUP    

alaDcbxPfcUsageNewGroup 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.6
Collection of PFC Lossless Priorities Usage Objects. Compatible with Virtual Chassis mode.
Status: current Access: read-create
OBJECT-GROUP    

alaXdot1dcbxAdminApplicationPriorityGroup 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.7
Collection of dcbx app priority configuration Usage Objects.
Status: current Access: read-create
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor