ALCATEL-IND1-BGP-MIB

File: ALCATEL-IND1-BGP-MIB.mib (218865 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB IPV6-TC INET-ADDRESS-MIB
ALCATEL-IND1-BASE

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
TimeTicks IpAddress Counter32
Gauge32 Integer32 Unsigned32
RowStatus MODULE-COMPLIANCE OBJECT-GROUP
SnmpAdminString Ipv6Address InetAutonomousSystemNumber
routingIND1Bgp

Defined Types

AlaBgpPeerEntry  
SEQUENCE    
  alaBgpPeerAddr IpAddress
  alaBgpPeerAS InetAutonomousSystemNumber
  alaBgpPeerPassive INTEGER
  alaBgpPeerName SnmpAdminString
  alaBgpPeerMultiHop INTEGER
  alaBgpPeerMaxPrefix Gauge32
  alaBgpPeerMaxPrefixWarnOnly INTEGER
  alaBgpPeerNextHopSelf INTEGER
  alaBgpPeerSoftReconfig INTEGER
  alaBgpPeerInSoftReset INTEGER
  alaBgpPeerIpv4Unicast INTEGER
  alaBgpPeerIpv4Multicast INTEGER
  alaBgpPeerRcvdRtRefreshMsgs Counter32
  alaBgpPeerSentRtRefreshMsgs Counter32
  alaBgpPeerRouteMapOut SnmpAdminString
  alaBgpPeerRouteMapIn SnmpAdminString
  alaBgpPeerLocalAddr IpAddress
  alaBgpPeerLastDownReason INTEGER
  alaBgpPeerLastDownTime TimeTicks
  alaBgpPeerLastReadTime TimeTicks
  alaBgpPeerRcvdNotifyMsgs Counter32
  alaBgpPeerSentNotifyMsgs Counter32
  alaBgpPeerLastSentNotifyReason INTEGER
  alaBgpPeerLastRecvNotifyReason INTEGER
  alaBgpPeerRcvdPrefixes Counter32
  alaBgpPeerDownTransitions Counter32
  alaBgpPeerType INTEGER
  alaBgpPeerClearCounter INTEGER
  alaBgpPeerAutoReStart INTEGER
  alaBgpPeerClientStatus INTEGER
  alaBgpPeerConfedStatus INTEGER
  alaBgpPeerRemovePrivateAs INTEGER
  alaBgpPeerTTL Integer32
  alaBgpPeerAspathListOut SnmpAdminString
  alaBgpPeerAspathListIn SnmpAdminString
  alaBgpPeerPrefixListOut SnmpAdminString
  alaBgpPeerPrefixListIn SnmpAdminString
  alaBgpPeerCommunityListOut SnmpAdminString
  alaBgpPeerCommunityListIn SnmpAdminString
  alaBgpPeerRestart INTEGER
  alaBgpPeerDefaultOriginate INTEGER
  alaBgpPeerReconfigureInBound INTEGER
  alaBgpPeerReconfigureOutBound INTEGER
  alaBgpPeerMD5Key SnmpAdminString
  alaBgpPeerMD5KeyEncrypt OCTET STRING
  alaBgpPeerRowStatus RowStatus
  alaBgpPeerUpTransitions Counter32
  alaBgpPeerLastWriteTime TimeTicks
  alaBgpPeerRcvdMsgs Counter32
  alaBgpPeerSentMsgs Counter32
  alaBgpPeerRcvdUpdMsgs Counter32
  alaBgpPeerSentUpdMsgs Counter32
  alaBgpPeerLastTransitionTime TimeTicks
  alaBgpPeerLastUpTime TimeTicks
  alaBgpPeerBgpId IpAddress
  alaBgpPeerLocalIntfName SnmpAdminString
  alaBgpPeerRestartTime Integer32
  alaBgpPeerRestartState INTEGER
  alaBgpPeerRestartFwdState INTEGER
  alaBgpPeerIpv6Unicast INTEGER
  alaBgpPeerIpv6NextHop Ipv6Address
  alaBgpPeerLocalPort Integer32
  alaBgpPeerTcpWindowSize Integer32
  alaBgpPeerActivateIpv6 INTEGER
  alaBgpPeerBfdStatus INTEGER
  alaBgpPeerPrefix6ListOut SnmpAdminString
  alaBgpPeerPrefix6ListIn SnmpAdminString

AlaBgpAggrEntry  
SEQUENCE    
  alaBgpAggrAddr IpAddress
  alaBgpAggrMask IpAddress
  alaBgpAggrSummarize INTEGER
  alaBgpAggrSet INTEGER
  alaBgpAggrState INTEGER
  alaBgpAggrMetric Gauge32
  alaBgpAggrLocalPref Gauge32
  alaBgpAggrCommunity SnmpAdminString
  alaBgpAggrRowStatus RowStatus

AlaBgpNetworkEntry  
SEQUENCE    
  alaBgpNetworkAddr IpAddress
  alaBgpNetworkMask IpAddress
  alaBgpNetworkState INTEGER
  alaBgpNetworkMetric Gauge32
  alaBgpNetworkLocalPref Gauge32
  alaBgpNetworkCommunity SnmpAdminString
  alaBgpNetworkRowStatus RowStatus

AlaBgpRouteEntry  
SEQUENCE    
  alaBgpRouteAddr IpAddress
  alaBgpRouteMask IpAddress
  alaBgpRouteState INTEGER
  alaBgpRoutePaths Counter32
  alaBgpRouteFeasiblePaths Counter32
  alaBgpRouteNextHop IpAddress
  alaBgpRouteIgpNextHop IpAddress
  alaBgpRouteIsHidden INTEGER
  alaBgpRouteIsAggregate INTEGER
  alaBgpRouteIsAggregateContributor INTEGER
  alaBgpRouteAdvNeighbors SnmpAdminString
  alaBgpRouteIsAggregateList INTEGER
  alaBgpRouteIsAggregateWait INTEGER
  alaBgpRouteIsOnEbgpChgList INTEGER
  alaBgpRouteIsOnIbgpClientChgList INTEGER
  alaBgpRouteIsOnIbgpChgList INTEGER
  alaBgpRouteIsOnLocalChgList INTEGER
  alaBgpRouteIsOnDeleteList INTEGER
  alaBgpRouteIsDampened INTEGER

AlaBgpPathEntry  
SEQUENCE    
  alaBgpPathAddr IpAddress
  alaBgpPathMask IpAddress
  alaBgpPathPeerAddr IpAddress
  alaBgpPathSrcProto INTEGER
  alaBgpPathWeight Integer32
  alaBgpPathPref Gauge32
  alaBgpPathState INTEGER
  alaBgpPathOrigin INTEGER
  alaBgpPathNextHop IpAddress
  alaBgpPathAs SnmpAdminString
  alaBgpPathLocalPref Integer32
  alaBgpPathMed Gauge32
  alaBgpPathAtomic INTEGER
  alaBgpPathAggregatorAs InetAutonomousSystemNumber
  alaBgpPathAggregatorAddr IpAddress
  alaBgpPathCommunity SnmpAdminString
  alaBgpPathUnknownAttr OCTET STRING
  alaBgpPathOriginatorId IpAddress
  alaBgpPathClusterList SnmpAdminString
  alaBgpPathPeerInetType INTEGER
  alaBgpPathPeerName SnmpAdminString

AlaBgpDampEntry  
SEQUENCE    
  alaBgpDampAddr IpAddress
  alaBgpDampMask IpAddress
  alaBgpDampPeerAddr IpAddress
  alaBgpDampFigureOfMerit Integer32
  alaBgpDampFlaps Counter32
  alaBgpDampDuration TimeTicks
  alaBgpDampLastUpdateTime TimeTicks
  alaBgpDampReuseTime TimeTicks
  alaBgpDampClear INTEGER

AlaBgpRouteMapEntry  
SEQUENCE    
  alaBgpRouteMapName SnmpAdminString
  alaBgpRouteMapInst Integer32
  alaBgpRouteMapAsPathMatchListId SnmpAdminString
  alaBgpRouteMapPrefixMatchListId SnmpAdminString
  alaBgpRouteMapCommunityMatchListId SnmpAdminString
  alaBgpRouteMapOrigin INTEGER
  alaBgpRouteMapLocalPref Gauge32
  alaBgpRouteMapLocalPrefMode INTEGER
  alaBgpRouteMapMed Gauge32
  alaBgpRouteMapMedMode INTEGER
  alaBgpRouteMapAsPrepend SnmpAdminString
  alaBgpRouteMapSetCommunityMode INTEGER
  alaBgpRouteMapCommunity SnmpAdminString
  alaBgpRouteMapMatchAsRegExp SnmpAdminString
  alaBgpRouteMapMatchPrefix IpAddress
  alaBgpRouteMapMatchMask IpAddress
  alaBgpRouteMapMatchCommunity SnmpAdminString
  alaBgpRouteMapWeight Integer32
  alaBgpRouteMapAction INTEGER
  alaBgpRouteMapRowStatus RowStatus

AlaBgpAspathMatchListEntry  
SEQUENCE    
  alaBgpAspathMatchListId SnmpAdminString
  alaBgpAspathMatchListRegExp SnmpAdminString
  alaBgpAspathMatchListPriority Integer32
  alaBgpAspathMatchListAction INTEGER
  alaBgpAspathMatchListRowStatus RowStatus
  alaBgpAspathMatchListSubIndex Integer32

AlaBgpPrefixMatchListEntry  
SEQUENCE    
  alaBgpPrefixMatchListId SnmpAdminString
  alaBgpPrefixMatchListAddr IpAddress
  alaBgpPrefixMatchListMask IpAddress
  alaBgpPrefixMatchListGE Integer32
  alaBgpPrefixMatchListLE Integer32
  alaBgpPrefixMatchListAction INTEGER
  alaBgpPrefixMatchListRowStatus RowStatus

AlaBgpCommunityMatchListEntry  
SEQUENCE    
  alaBgpCommunityMatchListId SnmpAdminString
  alaBgpCommunityMatchListString SnmpAdminString
  alaBgpCommunityMatchListPriority Integer32
  alaBgpCommunityMatchListType INTEGER
  alaBgpCommunityMatchListAction INTEGER
  alaBgpCommunityMatchListRowStatus RowStatus
  alaBgpCommunityMatchListSubIndex Integer32

AlaBgpAspathPriMatchListEntry  
SEQUENCE    
  alaBgpAspathPriMatchListId SnmpAdminString
  alaBgpAspathPriMatchListPriority Integer32
  alaBgpAspathPriMatchListIntIdx Integer32
  alaBgpAspathPriMatchListRegExp SnmpAdminString
  alaBgpAspathPriMatchListAction INTEGER
  alaBgpAspathPriMatchListRowStatus RowStatus

AlaBgpCommunityPriMatchListEntry  
SEQUENCE    
  alaBgpCommunityPriMatchListId SnmpAdminString
  alaBgpCommunityPriMatchListPriority Integer32
  alaBgpCommunityPriMatchListIntIdx Integer32
  alaBgpCommunityPriMatchListString SnmpAdminString
  alaBgpCommunityPriMatchListType INTEGER
  alaBgpCommunityPriMatchListAction INTEGER
  alaBgpCommunityPriMatchListRowStatus RowStatus

AlaBgpPrefix6MatchListEntry  
SEQUENCE    
  alaBgpPrefix6MatchListId SnmpAdminString
  alaBgpPrefix6MatchListAddr Ipv6Address
  alaBgpPrefix6MatchListAddrLength Integer32
  alaBgpPrefix6MatchListGE Integer32
  alaBgpPrefix6MatchListLE Integer32
  alaBgpPrefix6MatchListAction INTEGER
  alaBgpPrefix6MatchListRowStatus RowStatus

AlaBgpNetwork6Entry  
SEQUENCE    
  alaBgpNetwork6Addr Ipv6Address
  alaBgpNetwork6MaskLen Integer32
  alaBgpNetwork6State INTEGER
  alaBgpNetwork6Metric Gauge32
  alaBgpNetwork6LocalPref Gauge32
  alaBgpNetwork6Community SnmpAdminString
  alaBgpNetwork6RowStatus RowStatus

AlaBgpRoute6Entry  
SEQUENCE    
  alaBgpRoute6Addr Ipv6Address
  alaBgpRoute6MaskLen Integer32
  alaBgpRoute6State INTEGER
  alaBgpRoute6Paths Counter32
  alaBgpRoute6FeasiblePaths Counter32
  alaBgpRoute6NextHop Ipv6Address
  alaBgpRoute6IgpNextHop Ipv6Address
  alaBgpRoute6IsHidden INTEGER
  alaBgpRoute6IsAggregate INTEGER
  alaBgpRoute6IsAggregateContributor INTEGER
  alaBgpRoute6AdvNeighbors SnmpAdminString
  alaBgpRoute6IsAggregateList INTEGER
  alaBgpRoute6IsAggregateWait INTEGER
  alaBgpRoute6IsOnEbgpChgList INTEGER
  alaBgpRoute6IsOnIbgpClientChgList INTEGER
  alaBgpRoute6IsOnIbgpChgList INTEGER
  alaBgpRoute6IsOnLocalChgList INTEGER
  alaBgpRoute6IsOnDeleteList INTEGER
  alaBgpRoute6IsDampened INTEGER

AlaBgpPath6Entry  
SEQUENCE    
  alaBgpPath6Addr Ipv6Address
  alaBgpPath6MaskLen Integer32
  alaBgpPath6PeerBgpId IpAddress
  alaBgpPath6SrcProto INTEGER
  alaBgpPath6Weight Integer32
  alaBgpPath6Pref Gauge32
  alaBgpPath6State INTEGER
  alaBgpPath6Origin INTEGER
  alaBgpPath6NextHop Ipv6Address
  alaBgpPath6As SnmpAdminString
  alaBgpPath6LocalPref Integer32
  alaBgpPath6Med Gauge32
  alaBgpPath6Atomic INTEGER
  alaBgpPath6AggregatorAs InetAutonomousSystemNumber
  alaBgpPath6AggregatorAddr IpAddress
  alaBgpPath6Community SnmpAdminString
  alaBgpPath6UnknownAttr OCTET STRING
  alaBgpPath6OriginatorId IpAddress
  alaBgpPath6ClusterList SnmpAdminString
  alaBgpPath6PeerName SnmpAdminString

AlaBgpPeer6Entry  
SEQUENCE    
  alaBgpPeer6Addr Ipv6Address
  alaBgpPeer6AS InetAutonomousSystemNumber
  alaBgpPeer6Passive INTEGER
  alaBgpPeer6Name SnmpAdminString
  alaBgpPeer6MultiHop INTEGER
  alaBgpPeer6MaxPrefix Gauge32
  alaBgpPeer6MaxPrefixWarnOnly INTEGER
  alaBgpPeer6NextHopSelf INTEGER
  alaBgpPeer6SoftReconfig INTEGER
  alaBgpPeer6InSoftReset INTEGER
  alaBgpPeer6Ipv4Unicast INTEGER
  alaBgpPeer6Ipv4Multicast INTEGER
  alaBgpPeer6RcvdRtRefreshMsgs Counter32
  alaBgpPeer6SentRtRefreshMsgs Counter32
  alaBgpPeer6RouteMapOut SnmpAdminString
  alaBgpPeer6RouteMapIn SnmpAdminString
  alaBgpPeer6LocalAddr Ipv6Address
  alaBgpPeer6LastDownReason INTEGER
  alaBgpPeer6LastDownTime TimeTicks
  alaBgpPeer6LastReadTime TimeTicks
  alaBgpPeer6RcvdNotifyMsgs Counter32
  alaBgpPeer6SentNotifyMsgs Counter32
  alaBgpPeer6LastSentNotifyReason INTEGER
  alaBgpPeer6LastRecvNotifyReason INTEGER
  alaBgpPeer6RcvdPrefixes Counter32
  alaBgpPeer6DownTransitions Counter32
  alaBgpPeer6Type INTEGER
  alaBgpPeer6ClearCounter INTEGER
  alaBgpPeer6AutoReStart INTEGER
  alaBgpPeer6ClientStatus INTEGER
  alaBgpPeer6ConfedStatus INTEGER
  alaBgpPeer6RemovePrivateAs INTEGER
  alaBgpPeer6TTL Integer32
  alaBgpPeer6AspathListOut SnmpAdminString
  alaBgpPeer6AspathListIn SnmpAdminString
  alaBgpPeer6PrefixListOut SnmpAdminString
  alaBgpPeer6PrefixListIn SnmpAdminString
  alaBgpPeer6CommunityListOut SnmpAdminString
  alaBgpPeer6CommunityListIn SnmpAdminString
  alaBgpPeer6Restart INTEGER
  alaBgpPeer6DefaultOriginate INTEGER
  alaBgpPeer6ReconfigureInBound INTEGER
  alaBgpPeer6ReconfigureOutBound INTEGER
  alaBgpPeer6MD5Key SnmpAdminString
  alaBgpPeer6MD5KeyEncrypt OCTET STRING
  alaBgpPeer6RowStatus RowStatus
  alaBgpPeer6UpTransitions Counter32
  alaBgpPeer6LastWriteTime TimeTicks
  alaBgpPeer6RcvdMsgs Counter32
  alaBgpPeer6SentMsgs Counter32
  alaBgpPeer6RcvdUpdMsgs Counter32
  alaBgpPeer6SentUpdMsgs Counter32
  alaBgpPeer6LastTransitionTime TimeTicks
  alaBgpPeer6LastUpTime TimeTicks
  alaBgpPeer6BgpId IpAddress
  alaBgpPeer6LocalIntfName SnmpAdminString
  alaBgpPeer6RestartTime Integer32
  alaBgpPeer6RestartState INTEGER
  alaBgpPeer6RestartFwdState INTEGER
  alaBgpPeer6Ipv6Unicast INTEGER
  alaBgpPeer6HoldTime Integer32
  alaBgpPeer6KeepAlive Integer32
  alaBgpPeer6ConnRetryInterval Integer32
  alaBgpPeer6HoldTimeConfigured Integer32
  alaBgpPeer6KeepAliveConfigured Integer32
  alaBgpPeer6Ipv4NextHop IpAddress
  alaBgpPeer6Ipv6NextHop Ipv6Address
  alaBgpPeer6AdminStatus INTEGER
  alaBgpPeer6State INTEGER
  alaBgpPeer6LocalPort Integer32
  alaBgpPeer6TcpWindowSize Integer32
  alaBgpPeer6ActivateIpv6 INTEGER
  alaBgpPeer6MinRouteAdvertisementInterval Integer32
  alaBgpPeer6Prefix6ListOut SnmpAdminString
  alaBgpPeer6Prefix6ListIn SnmpAdminString

Defined Values

alcatelIND1BGPMIB 1.3.6.1.4.1.6486.801.1.2.1.10.5.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Configuration of BGP Protocol Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1BGPMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1
Branch For Border Gateway Protocol (BGP) Subsystem Managed Objects.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1BGPMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2
Branch For Border Gateway Protocol (BGP) Subsystem Conformance Information.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1BGPMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1
Branch For Border Gateway Protocol (BGP) Subsystem Units Of Conformance.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1BGPMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.2
Branch For Border Gateway Protocol (BGP) Subsystem Compliance Statements.
Status: current Access: read-only
OBJECT-IDENTITY    

alaBgpGlobal 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1
OBJECT IDENTIFIER    

alaBgpProtoStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.1
The administrative status of BGP protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpAutonomousSystemNumber 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.2
The BGP Autonomous System (AS) Number.
Status: current Access: read-write
OBJECT-TYPE    
  InetAutonomousSystemNumber  

alaBgpRouterId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.3
The configured BGP router ID.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpIgpSynchStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.4
Enable/Disable IGP Synchronization for learned BGP prefixes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpMedAlways 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.5
Enable/Disable BGP Metric MULTI_EXIT_DISC comparison between routes from different Autonomous Systems.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpDefaultLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.6
The default LOCAL_PREF to be applied to routes learnt from neighbouring autonomous system.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpMissingMed 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.7
Specifies how to a missing med in a path attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER worst(1), best(2)  

alaBgpManualTag 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.8
Manual tag to be used for learned BGP routes. A value of 0 means no manual tagging.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..65535  

alaBgpConfedId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.9
Confederation identifier. A value of 0 means this local speaker is not a member of any confederation
Status: current Access: read-write
OBJECT-TYPE    
  InetAutonomousSystemNumber  

alaBgpDampening 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.10
Enable/Disable BGP route dampening
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpDampMaxFlapHistory 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.11
The time in seconds the flap history of a route is retained.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

alaBgpFastExternalFailOver 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.12
Enable/Disable Resetting session immediately if a link to a directly connected external peer is operationally down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerChanges 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.13
Enable/Disable logging of peer state changes to the syslog.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpVersion 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.14
The BGP Version in use.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

alaBgpProtoOperState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.15
The BGP protocol operational state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alaBgpMaxPeers 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.16
Maximum number of BGP peers supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..32  

alaBgpNumActiveRoutes 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.17
The number of active known routes in the BGP routing table
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

alaBgpNumEstabExternalPeers 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.18
The number of External Peers that are in ESTABLISHED state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpNumEstabInternalPeers 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.19
The number of Internal Peers that are in ESTABLISHED state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpNumPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.20
The total number of paths known to the system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpNumFeasiblePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.21
The total number of feasible paths known to the system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpNumDampenedPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.22
The total number of dampened paths known to the system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpNumIgpSyncWaitPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.23
The total number of paths learnt from internal peers that are waiting to be synchronized with IGP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpNumPolicyChgPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.24
The total number of paths that are currently rejected but stored anticipating an inbound policy change for an external peer which is configured to accept dynamic policy changes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpMultiPath 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.25
Enable/Disable Equal-Cost MultiPaths
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpRouteReflection 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.26
Enable/Disable Route reflection
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpClusterId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.27
The local cluster id of this route reflection cluster.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

alaBgpDampeningClear 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.28
Writing a value of clear into this variable will clear the dampening history.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

alaBgpDampCutOff 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.29
When a route's figure of merit reaches this value, the route is considered damped. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 ,a value of 9.45 is encoded as 945.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..9999  

alaBgpDampReuse 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.30
When a route's figure of merit decays to this value, the route can be reused. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 , a value of 9.45 is encoded as 945.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..9999  

alaBgpDampCeil 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.31
The maximum value that the figure of merit of a route can attain. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 100..9999  

alaBgpAspathCompare 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.32
Specifies whether to include aspath comparison in route selection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpAsOriginInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.33
The minimum interval in seconds between successive updates advertising the networks belonging to the local autonomous system.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

alaBgpDampHalfLife 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.34
The time in seconds in which the penalty to a flapping route decreases to half its initial value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

alaBgpGracefulRestart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.35
Enables BGP graceful restart capability.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpRestartInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.36
Determines how long, in seconds, peering BGP routers are told to wait for this router to complete graceful restart and re-establish peering session. It is recommended that this value not be more than the configured Hold Time interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3600  

alaBgpRestartStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.37
Indicates whether the router is currently performing a graceful restart.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notRestarting(1), inProgress(2)  

alaBgpMultiProtocolIpv4 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.38
Indicates whether IPv4 BGP4 capability is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpMultiProtocolIpv6 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.39
Indicates whether IPv6 BGP4 capability is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.40
Enables/Disables interaction with BFD module for BGP protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpBfdAllNeighborStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.41
Enables/Disables reachability detection using BFD for all BGP Neighbors.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpAsnFormat 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.42
Configures the display format to be used when displaying 4-octet Autonomous System Numbers. This configuration will change only the output format. The input format can still be in either mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asplain(1), asdot(2)  

alaBgpPeerTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2
BGP IPv4 peer table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpPeerEntry

alaBgpPeerEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1
BGP IPv4 Peer configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpPeerEntry  

alaBgpPeerAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.1
Ip Address of the peer.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPeerAS 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.2
Autonomous system of the peer.
Status: current Access: read-create
OBJECT-TYPE    
  InetAutonomousSystemNumber  

alaBgpPeerPassive 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.3
Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.4
A symbolic name for the neighbour.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..60)  

alaBgpPeerMultiHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.5
If enabled the external peer is allowed to be multiple hops away.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerMaxPrefix 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.6
The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..2147483647  

alaBgpPeerMaxPrefixWarnOnly 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.7
If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP switch logging for type 'warnings' must be activated and level set to info.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerNextHopSelf 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.8
If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the ip address of the interface attached to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerSoftReconfig 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.9
Enable/Disable dynamic policy configurability on the connection to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerInSoftReset 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.10
Route refresh capability is Enabled/Disabled on the connection to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeerIpv4Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.11
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeerIpv4Multicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.12
Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeerRcvdRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.13
The number of route refresh messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerSentRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.14
The number of route refresh messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerRouteMapOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.15
The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerRouteMapIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.16
The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerLocalAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.17
Local Ip Address of this connection.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

alaBgpPeerLastDownReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.18
The general reason for termination of last established session with the peer since the protocol was operationally up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER userRequest(1), connectionTimeout(2), holdTimeout(3), badMsg(4), fsmUnexpectedEvent(5), peerClosed(6), peerNotify(7), transportError(8), none(9)  

alaBgpPeerLastDownTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.19
The time elapsed since the BGP session with the peer was terminated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeerLastReadTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.20
The time elapsed since we last read data from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeerRcvdNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.21
The Number of notification messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerSentNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.22
The Number of notification messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerLastSentNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.23
The last notification reason sent.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)  

alaBgpPeerLastRecvNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.24
The last notification reason received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)  

alaBgpPeerRcvdPrefixes 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.25
The Number of prefixes received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerDownTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.26
The Number of times this peer session transitioned to IDLE state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.27
This indicates whether the peer belongs to the local autonomous system(internal) or another autonmous system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

alaBgpPeerClearCounter 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.28
Setting a value of clear into this variable will clear the per peer statistics.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER clear(1)  

alaBgpPeerAutoReStart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.29
Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerClientStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.30
If enabled this peer is a route reflection client.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerConfedStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.31
If enabled this peer is a member of our confederation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerRemovePrivateAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.32
If enabled private as numbers are stripped out in the updates sent to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerTTL 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.33
TTL count for packets on this TCP connection.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

alaBgpPeerAspathListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.34
The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerAspathListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.35
The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerPrefixListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.36
The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerPrefixListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.37
The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerCommunityListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.38
The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerCommunityListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.39
The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerRestart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.40
Setting a value of restart into this variable will restart the peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER restart(1)  

alaBgpPeerDefaultOriginate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.41
If enabled a default route is sent to this neighbour.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeerReconfigureInBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.42
Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reconfigure(1)  

alaBgpPeerReconfigureOutBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.43
Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reconfigure(1)  

alaBgpPeerMD5Key 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.44
Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..80)  

alaBgpPeerMD5KeyEncrypt 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.45
Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

alaBgpPeerRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.46
Row status variable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpPeerUpTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.47
The Number of times this peer session transitioned to ESTABLISHED state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerLastWriteTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.48
The time elapsed since we last sent data to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeerRcvdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.49
The Number of messages received from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerSentMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.50
The Number of messages sent to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerRcvdUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.51
The Number of update messages received from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerSentUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.52
The Number of update messages sent to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeerLastTransitionTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.53
The time elapsed since the BGP session was operationally up or down to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeerLastUpTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.54
The time elapsed since the BGP session with the peer was established.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeerBgpId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.55
BGP Identifier of the peer.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPeerLocalIntfName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.56
The user defined name used to identify the local IP interface for this peer's TCP connection.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

alaBgpPeerRestartTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.57
The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..3600  

alaBgpPeerRestartState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.58
Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notRestarting(1), restarting(2), none(3)  

alaBgpPeerRestartFwdState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.59
Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notPreserved(1), preserved(2)  

alaBgpPeerIpv6Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.60
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeerIpv6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.61
The IPv6 nexthop for IPv6 routes advertised to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  Ipv6Address  

alaBgpPeerLocalPort 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.62
The local port number for this peer's TCP connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

alaBgpPeerTcpWindowSize 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.63
The size of the socket buffers, in bytes, used for this TCP connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

alaBgpPeerActivateIpv6 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.64
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeerBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.65
Enables/Disables BFd for a particular Peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeerPrefix6ListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.66
The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeerPrefix6ListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.67
The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpAggrTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3
BGP Aggregate configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpAggrEntry

alaBgpAggrEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1
BGP Aggregation entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpAggrEntry  

alaBgpAggrAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.1
Aggregate address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpAggrMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.2
Aggregate Mask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpAggrSummarize 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.3
If enabled only aggregate is advertised. Otherwise more specific routes are also advertised.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpAggrSet 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.4
If enabled aggregate all aspaths.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpAggrState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.5
If active the aggregate is actively being advertised.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

alaBgpAggrMetric 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.6
This specifies the MED to be used when advertising this aggregate to external peers. A value of 0 indicates not to send MED.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpAggrLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.7
This specifies the override default LOCAL PREF to be used when advertising this aggregate to internal peers. A value of 0 indicates not to override the default.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpAggrCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.8
The value to set the COMMUNITY attribute when advertising this aggregate.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpAggrRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.9
Row status variable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpNetworkTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4
BGP Network configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpNetworkEntry

alaBgpNetworkEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1
BGP Network entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpNetworkEntry  

alaBgpNetworkAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.1
Aggregate address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpNetworkMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.2
Aggregate Mask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpNetworkState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.3
Indicates whether the network is being actively advertised or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

alaBgpNetworkMetric 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.4
This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpNetworkLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.5
This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpNetworkCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.6
The value to set the COMMUNITY attribute when advertising this network.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpNetworkRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.7
Row status variable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5
BGP Routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpRouteEntry

alaBgpRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1
BGP Route entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpRouteEntry  

alaBgpRouteAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.1
Destination address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpRouteMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.2
Destination Mask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpRouteState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.3
Indicates whether the route is being actively advertised or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoutePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.4
Number of total paths available to this destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpRouteFeasiblePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.5
Number of Feasible paths available to this destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpRouteNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.6
The BGP Nexthop to reach this destination.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpRouteIgpNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.7
The IGP Nexthop to reach this destination.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpRouteIsHidden 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.8
Indicates whether the route is hidden by an aggregate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsAggregate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.9
Indicates whether the route is an aggregate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsAggregateContributor 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.10
Indicates whether the route is a contributor to an aggregate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteAdvNeighbors 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.11
List of (addresses of) neighbours to whom this route has been advertised is encoded here.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpRouteIsAggregateList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.12
Indicates whether the route is on an aggregate list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsAggregateWait 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.13
Indicates whether the route is an aggregate waiting for a contributor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsOnEbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.14
Indicates whether the route is placed on list of EBGP routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsOnIbgpClientChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.15
Indicates whether the route is placed on list of IBGP reflector-client routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsOnIbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.16
Indicates whether the route is placed on list of IBGP non-reflector-client routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsOnLocalChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.17
Indicates whether the route is placed on list of local routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsOnDeleteList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.18
Indicates whether the route is placed on delete list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRouteIsDampened 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.19
Indicates whether the route is being route flap dampened.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpPathTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6
BGP Path table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpPathEntry

alaBgpPathEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1
BGP path entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpPathEntry  

alaBgpPathAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.1
Destination address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPathMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.2
Destination Mask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPathPeerAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.3
The IP address or the BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0. For peers with an IPv4 address, the value will be the peer's IPv4 address, and the value of alaBgpPathPeerInetType will be ipv4. For peers with an IPv6 address, the value will be the peer's BGP Identifier, and the value of alaBgpPathPeerInetType will be ipv6.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPathSrcProto 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.4
The protocol from which the path was learnt.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), static(3), directHost(4), rip(5), ospf(6), isis(7), ebgp(9), ibgp(10), aggregate(11), network(12)  

alaBgpPathWeight 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.5
The weight assigned to this path.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

alaBgpPathPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.6
The degree of preference assigned to this path.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

alaBgpPathState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.7
Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER best(1), feasible(2), policyWait(3), unSynchronized(4), dampened(5), none(6), stale(7)  

alaBgpPathOrigin 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.8
The ORIGIN attribute of the path.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3), none(9)  

alaBgpPathNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.9
The NEXTHOP attribute of the path.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPathAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.10
The sequence of AS path segments. Each AS path segment is represented by a triple . The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpPathLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.11
The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..2147483647  

alaBgpPathMed 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.12
The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpPathAtomic 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.13
Indicates whether this path is generated without selecting a less specific route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpPathAggregatorAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.14
The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

alaBgpPathAggregatorAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.15
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPathCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.16
The community attribute of the path. The communities are represented as series of 4 octet values.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpPathUnknownAttr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.17
One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

alaBgpPathOriginatorId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.18
The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPathClusterList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.19
Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpPathPeerInetType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.20
Indicates whether the peer who sent this path has an IPv4 address or an IPv6 address. If set to ipv4, the peer has an IPv4 address, and the value of alaBgpPathPeerAddr is the peer's IPv4 address. If set to ipv6, the peer has an IPv6 address, and the value of alaBgpPathPeerAddr is the peer's BGP Identifier. For locally sourced routes, the value is set to unknown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), ipv4(1), ipv6(2)  

alaBgpPathPeerName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.21
The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..60)  

alaBgpDampTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7
BGP Dampened paths table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpDampEntry

alaBgpDampEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1
BGP Network entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpDampEntry  

alaBgpDampAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.1
Destination address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpDampMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.2
Destination mask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpDampPeerAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.3
Neighbour address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpDampFigureOfMerit 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.4
The figure of merit value. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

alaBgpDampFlaps 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.5
The number of times this route has flapped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpDampDuration 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.6
Time in seconds since the flap was noticed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpDampLastUpdateTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.7
Time in seconds since this damp entry (figure of merit) was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpDampReuseTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.8
Time in seconds until this route will be reused.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpDampClear 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.9
A value of clear will clear this damp history information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

alaBgpPolicy 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8
OBJECT IDENTIFIER    

alaBgpRouteMapTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1
BGP Policy RouteMap table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpRouteMapEntry

alaBgpRouteMapEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1
BGP Route Map Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpRouteMapEntry  

alaBgpRouteMapName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.1
Name of the route map.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpRouteMapInst 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.2
Instance of this route map.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

alaBgpRouteMapAsPathMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.3
This is same as alaBgpAspathMatchListId. It identifies the matching criteria list of Autonomous system paths. Empty quotes indicate no autonomous system paths matching criteria is to be applied.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpRouteMapPrefixMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.4
This is same as alaBgpPrefixMatchListId. It identifies the matching criteria list of prefixes. Empty quotes indicate no prefix matching criteria is to be applied.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpRouteMapCommunityMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.5
This is same as alaBgpCommunityMatchListId. It identifies the matching criteria list of communities. Empty quotes indicate no community matching criteria is to be applied.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpRouteMapOrigin 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.6
The value to set the origin of the routes matched by this RouteMap instance. A value of none means no origin is to be set.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3), none(255)  

alaBgpRouteMapLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.7
The value to set the LOCAL PREF attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the LOCAL PREF attribute in conjunction with the associated value of alaBgpRouteMapLocalPrefMode.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpRouteMapLocalPrefMode 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.8
This variable specifies how alaBgpRouteMapLocalPref is to be operated on an existing LPREF attribute of a route on which this RouteMap instance is applied to.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), inc(2), dec(3), rep(4)  

alaBgpRouteMapMed 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.9
The value to set the MULTI EXIT DISC attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the MULTI EXIT DISC attribute in conjunction with the associated value of alaBgpRouteMapMedMode.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpRouteMapMedMode 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.10
This variable specifies how alaBgpRouteMapMed is to be operated on an existing MULTI EXIT DISC attribute of a route on which this RouteMap instance is applied to.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), inc(2), dec(3), rep(4)  

alaBgpRouteMapAsPrepend 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.11
The value to prepend to the AS_PATH attribute of the routes matched by this RouteMap instance. Empty quotes indicates no AS_PATH prepending is to be done.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpRouteMapSetCommunityMode 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.12
Determines whether alaBgpRouteMapCommunity will be adding to or replacing the COMMUNITY attribute of the routes matched by this RouteMap instance.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER add(1), replace(2)  

alaBgpRouteMapCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.13
The value to set the COMMUNITY attribute of the routes matched by this RouteMap instance.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpRouteMapMatchAsRegExp 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.14
AsPath regular expression matching primitive.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpRouteMapMatchPrefix 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.15
Prefix match primitive.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

alaBgpRouteMapMatchMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.16
Prefix match mask primitive
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

alaBgpRouteMapMatchCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.17
Community match primitive
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpRouteMapWeight 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.18
This sets the weight for the incoming route. This parameter has no effect on outbound policy.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

alaBgpRouteMapAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.19
This determines whether to allow a matching route to pass through.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

alaBgpRouteMapRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.20
Row status variable
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpAspathMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2
BGP Policy Aspath criteria matching table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpAspathMatchListEntry

alaBgpAspathMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1
Aspath matching entry .
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpAspathMatchListEntry  

alaBgpAspathMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.1
Identifier of this list of autonomous system path matching criteria.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpAspathMatchListRegExp 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.2
The regular expression identifying the autnomous system paths to be matched by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpAspathMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.3
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

alaBgpAspathMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.4
This determines whether to accept or reject a matching route.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

alaBgpAspathMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.5
Row status variable
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpAspathMatchListSubIndex 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.6
The primary index of this list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

alaBgpPrefixMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3
BGP Policy prefix matching criteria table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpPrefixMatchListEntry

alaBgpPrefixMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1
BGP Prefix matching instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpPrefixMatchListEntry  

alaBgpPrefixMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.1
Identifier of this list of autonomous system path matching criteria.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpPrefixMatchListAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.2
The address to be matched.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPrefixMatchListMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.3
The mask to be matched.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPrefixMatchListGE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.4
Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListGE must be > length of (alaBgpPrefixMatchListMask) and < alaBgpPrefixMatchListLE.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..32  

alaBgpPrefixMatchListLE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.5
Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListLE must be >= alaBgpPrefixMatchListGE and <= 32.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..32  

alaBgpPrefixMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.6
This determines whether to accept or reject a matching route.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

alaBgpPrefixMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.7
Row status variable
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpCommunityMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4
BGP Policy Community criteria matching table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpCommunityMatchListEntry

alaBgpCommunityMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1
Community matching entry .
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpCommunityMatchListEntry  

alaBgpCommunityMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.1
Identifier of this list of communities matching criteria.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpCommunityMatchListString 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.2
The string identifying the communities to be matched by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpCommunityMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.3
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

alaBgpCommunityMatchListType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.4
This determines the matching type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER exact(1), occur(2)  

alaBgpCommunityMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.5
This determines whether to accept or reject a matching route.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

alaBgpCommunityMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.6
Row status variable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpCommunityMatchListSubIndex 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.7
The primary index of this list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

alaBgpAspathPriMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5
Priority sorted view of BGP Policy Aspath matching table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpAspathPriMatchListEntry

alaBgpAspathPriMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1
Aspath matching entry .
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpAspathPriMatchListEntry  

alaBgpAspathPriMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.1
Identifier of this list of autonomous system path matching criteria.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpAspathPriMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.2
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathPriMatchListId.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

alaBgpAspathPriMatchListIntIdx 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.3
This is the order in which the matching regular expressions are created in the list identified by alaBgpAspathPriMatchListId.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

alaBgpAspathPriMatchListRegExp 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.4
The regular expression identifying the autnomous system paths to be matched by this instance
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpAspathPriMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.5
This determines whether to accept or reject a matching route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

alaBgpAspathPriMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.6
Row status variable.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

alaBgpCommunityPriMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6
Priority sorted view of BGP Policy Community matching table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpCommunityPriMatchListEntry

alaBgpCommunityPriMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1
Community matching entry .
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpCommunityPriMatchListEntry  

alaBgpCommunityPriMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.1
Identifier of this list of communities matching criteria.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpCommunityPriMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.2
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityPriMatchListId.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

alaBgpCommunityPriMatchListIntIdx 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.3
This determines the order in which the matching regular expressions are created in the list identified by alaBgpCommunityPriMatchListId.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

alaBgpCommunityPriMatchListString 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.4
The string identifying the communities to be matched by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpCommunityPriMatchListType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.5
This determines the matching type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER exact(1), occur(2)  

alaBgpCommunityPriMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.6
This determines whether to accept or reject a matching route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

alaBgpCommunityPriMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.7
Row status variable
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

alaBgpPrefix6MatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7
BGP Policy prefix6 matching criteria table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpPrefix6MatchListEntry

alaBgpPrefix6MatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1
BGP Prefix6 matching instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpPrefix6MatchListEntry  

alaBgpPrefix6MatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.1
Identifier of this list of autonomous system path matching criteria.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..70)  

alaBgpPrefix6MatchListAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.2
The IPv6 Prefix to be matched. A value of 0 indicates default route prefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

alaBgpPrefix6MatchListAddrLength 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.3
The length in bits of the IPv6 prefix being matched. A value of 0 indicates default route prefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128  

alaBgpPrefix6MatchListGE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.4
Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListGE must be > length of (alaBgpPrefix6MatchListAddrLength) and < alaBgpPrefix6MatchListLE.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..128  

alaBgpPrefix6MatchListLE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.5
Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListLE must be >= alaBgpPrefix6MatchListGE and <= 128.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..128  

alaBgpPrefix6MatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.6
This determines whether to accept or reject a matching route.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

alaBgpPrefix6MatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.7
Row status variable
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpNetwork6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9
BGP Network6 configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpNetwork6Entry

alaBgpNetwork6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1
BGP Network6 entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpNetwork6Entry  

alaBgpNetwork6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.1
The IPv6 address of the BGP Network.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address Size(16)  

alaBgpNetwork6MaskLen 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.2
The number of bits that are significant in the IPv6 address prefix of the BGP Network.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..128  

alaBgpNetwork6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.3
Indicates whether the network is being actively advertised or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

alaBgpNetwork6Metric 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.4
This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpNetwork6LocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.5
This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpNetwork6Community 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.6
The value to set the COMMUNITY attribute when advertising this network.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpNetwork6RowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.7
Row status variable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpRoute6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10
BGP IPv6 Routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpRoute6Entry

alaBgpRoute6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1
BGP Route entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpRoute6Entry  

alaBgpRoute6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.1
Destination address.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

alaBgpRoute6MaskLen 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.2
Destination address length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..128  

alaBgpRoute6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.3
Indicates whether the route is being actively advertised or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6Paths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.4
Number of total paths available to this destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpRoute6FeasiblePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.5
Number of Feasible paths available to this destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpRoute6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.6
The BGP Nexthop to reach this destination.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

alaBgpRoute6IgpNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.7
The IGP Nexthop to reach this destination.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

alaBgpRoute6IsHidden 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.8
Indicates whether the route is hidden by an aggregate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsAggregate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.9
Indicates whether the route is an aggregate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsAggregateContributor 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.10
Indicates whether the route is a contributor to an aggregate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6AdvNeighbors 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.11
List of (addresses of) neighbours to whom this route has been advertised is encoded here.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpRoute6IsAggregateList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.12
Indicates whether the route is on an aggregate list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsAggregateWait 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.13
Indicates whether the route is an aggregate waiting for a contributor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsOnEbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.14
Indicates whether the route is placed on list of EBGP routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsOnIbgpClientChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.15
Indicates whether the route is placed on list of IBGP reflector-client routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsOnIbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.16
Indicates whether the route is placed on list of IBGP non-reflector-client routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsOnLocalChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.17
Indicates whether the route is placed on list of local routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsOnDeleteList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.18
Indicates whether the route is placed on delete list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpRoute6IsDampened 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.19
Indicates whether the route is being route flap dampened.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpPath6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11
BGP Path table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpPath6Entry

alaBgpPath6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1
BGP path6 entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpPath6Entry  

alaBgpPath6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.1
Destination address.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

alaBgpPath6MaskLen 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.2
Destination address length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..128  

alaBgpPath6PeerBgpId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.3
The BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPath6SrcProto 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.4
The protocol from which the path was learnt.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), static(3), directHost(4), rip(5), ospf(6), isis(7), ebgp(9), ibgp(10), aggregate(11), network(12)  

alaBgpPath6Weight 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.5
The weight assigned to this path.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

alaBgpPath6Pref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.6
The degree of preference assigned to this path.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

alaBgpPath6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.7
Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER best(1), feasible(2), policyWait(3), unSynchronized(4), dampened(5), none(6), stale(7)  

alaBgpPath6Origin 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.8
The ORIGIN attribute of the path.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3), none(9)  

alaBgpPath6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.9
The NEXTHOP attribute of the path.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

alaBgpPath6As 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.10
The sequence of AS path segments. Each AS path segment is represented by a triple . The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpPath6LocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.11
The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..2147483647  

alaBgpPath6Med 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.12
The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

alaBgpPath6Atomic 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.13
Indicates whether this path is generated without selecting a less specific route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaBgpPath6AggregatorAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.14
The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

alaBgpPath6AggregatorAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.15
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPath6Community 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.16
The community attribute of the path. The communities are represented as series of 4 octet values.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpPath6UnknownAttr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.17
One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

alaBgpPath6OriginatorId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.18
The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPath6ClusterList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.19
Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

alaBgpPath6PeerName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.20
The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..60)  

alaBgpPeer6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12
BGP IPv6 peer table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaBgpPeer6Entry

alaBgpPeer6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1
BGP IPv6 Peer configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaBgpPeer6Entry  

alaBgpPeer6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.1
Ipv6 Address of the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

alaBgpPeer6AS 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.2
Autonomous system of the peer.
Status: current Access: read-create
OBJECT-TYPE    
  InetAutonomousSystemNumber  

alaBgpPeer6Passive 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.3
Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6Name 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.4
A symbolic name for the neighbour.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..60)  

alaBgpPeer6MultiHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.5
If enabled the external peer is allowed to be multiple hops away.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6MaxPrefix 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.6
The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0..2147483647  

alaBgpPeer6MaxPrefixWarnOnly 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.7
If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP switch logging for type 'warnings' must be activated and level set to info.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6NextHopSelf 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.8
If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the IPv6 address of the interface attached to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6SoftReconfig 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.9
Enable/Disable dynamic policy configurability on the connection to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6InSoftReset 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.10
Route refresh capability is Enabled/Disabled on the connection to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeer6Ipv4Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.11
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeer6Ipv4Multicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.12
Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeer6RcvdRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.13
The number of route refresh messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6SentRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.14
The number of route refresh messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6RouteMapOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.15
The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6RouteMapIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.16
The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6LocalAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.17
Local IPv6 address of this connection.
Status: current Access: read-create
OBJECT-TYPE    
  Ipv6Address  

alaBgpPeer6LastDownReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.18
The general reason for termination of last established session with the peer since the protocol was operationally up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER userRequest(1), connectionTimeout(2), holdTimeout(3), badMsg(4), fsmUnexpectedEvent(5), peerClosed(6), peerNotify(7), transportError(8), none(9)  

alaBgpPeer6LastDownTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.19
The time elapsed since the BGP session with the peer was terminated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeer6LastReadTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.20
The time elapsed since we last read data from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeer6RcvdNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.21
The Number of notification messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6SentNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.22
The Number of notification messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6LastSentNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.23
The last notification reason sent.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)  

alaBgpPeer6LastRecvNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.24
The last notification reason received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER msghdrNoSync(1), msghdrBadLen(2), msghdrBadType(3), openUnsuppVersion(4), openBadAs(5), openBadId(6), openUnsuppOption(7), openAuthFail(8), openBadHoldtime(9), openUnsuppCapability(10), updateMalformAttr(11), updateUnsuppWknwnAttr(12), updateMissingWknwnAttr(13), updateBadAttrFlags(14), updateBadAttrLen(15), updateBadOrigin(16), updateAsLoop(17), updateBadNexthop(18), updateBadOptAttr(19), updateBadNet(20), updateBadAspath(21), holdTimeout(22), fsmError(23), ceaseMaxPrefixReached(24), ceaseAdminShutdown(25), ceasePeerDeconfigured(26), ceaseAdminReset(27), ceaseConnRejected(28), ceaseOtherConfChange(29), ceaseConnCollisionResolution(30), ceaseOutOfResources(31), none(32)  

alaBgpPeer6RcvdPrefixes 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.25
The Number of prefixes received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6DownTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.26
The Number of times this peer session transitioned to IDLE state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6Type 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.27
This indicates whether the peer belongs to the local autonomous system(internal) or another autonomous system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

alaBgpPeer6ClearCounter 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.28
Setting a value of clear into this variable will clear the per peer statistics.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER clear(1)  

alaBgpPeer6AutoReStart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.29
Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6ClientStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.30
If enabled this peer is a route reflection client.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6ConfedStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.31
If enabled this peer is a member of our confederation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6RemovePrivateAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.32
If enabled private as numbers are stripped out in the updates sent to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6TTL 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.33
TTL count for packets on this TCP connection.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

alaBgpPeer6AspathListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.34
The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6AspathListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.35
The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6PrefixListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.36
The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6PrefixListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.37
The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6CommunityListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.38
The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6CommunityListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.39
The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6Restart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.40
Setting a value of restart into this variable will restart the peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER restart(1)  

alaBgpPeer6DefaultOriginate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.41
If enabled a default route is sent to this neighbour.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaBgpPeer6ReconfigureInBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.42
Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reconfigure(1)  

alaBgpPeer6ReconfigureOutBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.43
Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reconfigure(1)  

alaBgpPeer6MD5Key 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.44
Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..80)  

alaBgpPeer6MD5KeyEncrypt 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.45
Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

alaBgpPeer6RowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.46
Row status variable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaBgpPeer6UpTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.47
The Number of times this peer session transitioned to ESTABLISHED state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6LastWriteTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.48
The time elapsed since we last sent data to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeer6RcvdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.49
The Number of messages received from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6SentMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.50
The Number of messages sent to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6RcvdUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.51
The Number of update messages received from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6SentUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.52
The Number of update messages sent to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaBgpPeer6LastTransitionTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.53
The time elapsed since the BGP session was operationally up or down to the peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeer6LastUpTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.54
The time elapsed since the BGP session with the peer was established.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alaBgpPeer6BgpId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.55
BGP Identifier of the peer.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaBgpPeer6LocalIntfName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.56
The user defined name used to identify the local IPv6 interface for this peer's TCP connection.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

alaBgpPeer6RestartTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.57
The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..3600  

alaBgpPeer6RestartState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.58
Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notRestarting(1), restarting(2), none(3)  

alaBgpPeer6RestartFwdState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.59
Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notPreserved(1), preserved(2)  

alaBgpPeer6Ipv6Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.60
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeer6HoldTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.61
Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in alaBgpPeer6HoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the session has not been established with the peer, or, the value of alaBgpPeer6HoldTimeConfigured is zero (0).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 3..65535  

alaBgpPeer6KeepAlive 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.62
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with alaBgpPeer6HoldTime, it has the same proportion as what alaBgpPeer6KeepAliveConfigured has when compared with alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), it indicates that the session has not been established with the peer, or, the value of alaBgpPeer6KeepAliveConfigured is zero (0).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..21845  

alaBgpPeer6ConnRetryInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.63
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

alaBgpPeer6HoldTimeConfigured 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.64
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (alaBgpPeer6HoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be negotiated with the peer. The suggested value for this timer is 90 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 3..65535  

alaBgpPeer6KeepAliveConfigured 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.65
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in alaBgpPeer6HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by alaBgpPeer6KeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 1..21845  

alaBgpPeer6Ipv4NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.66
The IPv4 nexthop address to be used for IPv4 routes advertised to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

alaBgpPeer6Ipv6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.67
The IPv6 nexthop address to be used for IPv6 routes advertised to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  Ipv6Address  

alaBgpPeer6AdminStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.68
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER stop(1), start(2)  

alaBgpPeer6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.69
The BGP peer connection state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)  

alaBgpPeer6LocalPort 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.70
The local port number for this peer's TCP connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

alaBgpPeer6TcpWindowSize 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.71
The size of the socket buffers, in bytes, used for this TCP connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

alaBgpPeer6ActivateIpv6 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.72
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaBgpPeer6MinRouteAdvertisementInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.73
Time interval in seconds for the MinRouteAdvertisementInterval timer.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

alaBgpPeer6Prefix6ListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.74
The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alaBgpPeer6Prefix6ListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.75
The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..70)  

alcatelIND1BGPMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.2.1
The compliance statement for entities which implement the BGP4 mib.
Status: current Access: read-create
MODULE-COMPLIANCE    

alabgpMIBGlobalsGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.1
A collection of objects providing information on global BGP state.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBPeerGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.2
A collection of objects for managing BGP peers.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBAggrGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.3
A collection of objects for managing BGP aggregates.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBNetworkGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.4
A collection of objects for managing BGP networks.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.5
A collection of objects for managing BGP routes.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBPathAttrGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.6
A collection of objects for managing BGP paths attributes.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBDampGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.7
A collection of objects for managing BGP dampening.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBRouteMapGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.8
A collection of objects for managing BGP route maps.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBAspathListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.9
A collection of objects for managing BGP aspath lists.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBPrefixListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.10
A collection of objects for managing BGP prefix lists.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBCommunityListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.11
A collection of objects for managing BGP community lists.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBAspathPriListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.12
A collection of objects for managing BGP aspath lists by priority.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBCommunityPriListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.13
A collection of objects for managing BGP community lists by priority.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBNetwork6Group 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.14
A collection of objects for managing BGP IPv6 networks.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBRoute6Group 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.15
A collection of objects for managing BGP routes.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBPath6AttrGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.16
A collection of objects for managing BGP paths attributes.
Status: current Access: read-create
OBJECT-GROUP    

alabgpMIBPeer6Group 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.17
A collection of objects for managing BGP peers.
Status: current Access: read-create
OBJECT-GROUP    

alaBgpPrefix6MatchListEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.18
Identifier of this list of autonomous system path matching criteria.
Status: current Access: read-create
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor