ALCATEL-IEEE8021-PAE-MIB

File: ALCATEL-IEEE8021-PAE-MIB.mib (18962 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-GLOBAL-MIB TIMETRA-TC-MIB IEEE8021-PAE-MIB

Imported symbols

IpAddress MODULE-IDENTITY OBJECT-TYPE
Unsigned32 MODULE-COMPLIANCE OBJECT-GROUP
RowStatus TEXTUAL-CONVENTION alcatelCommonMIBModules
alcatelObjects alcatelNotifyPrefix alcatelConformance
TPolicyStatementNameOrEmpty ServiceAdminStatus TNamedItem
dot1xAuthConfigEntry

Defined Types

AlxDot1xRadiusServerType  
TEXTUAL-CONVENTION    
  current INTEGER authorization(0), accounting(1), combined(2)

Alxdot1xAuthConfigEntry  
SEQUENCE    
  alxDot1xAuthRadiusPlcy TPolicyStatementNameOrEmpty

AlxDot1xRadiusServerPlcyEntry  
SEQUENCE    
  alxDot1xRadiusPlcyName TNamedItem
  alxDot1xRadiusPlcySrceAddr IpAddress
  alxDot1xRadiusPlcyAdminState ServiceAdminStatus
  alxDot1xRadiusPlcyRowStatus RowStatus
  alxDot1xRadiusPlcyRetryAttempts Unsigned32
  alxDot1xRadiusPlcyTimeout Unsigned32

AlxDot1xRadiusServerEntry  
SEQUENCE    
  alxDot1xRadiusServerPlcyName TNamedItem
  alxDot1xRadiusServerIndex Unsigned32
  alxDot1xRadiusServerAddress IpAddress
  alxDot1xRadiusServerSecret STRING
  alxDot1xRadiusServerAuthPort Unsigned32
  alxDot1xRadiusServerOperStatus INTEGER
  alxDot1xRadiusServerRowStatus RowStatus
  alxDot1xRadiusServerType AlxDot1xRadiusServerType
  alxDot1xRadiusServerAcctPort Unsigned32

Defined Values

alcatelIEEE8021PaeMIBModule 1.3.6.1.4.1.6527.1.1.5.3
This document is the SNMP MIB module to manage and provision the 7x50 extensions to the IEEE8021-PAE-MIB (Port Access Entity nodule for managing IEEE 802.X) feature for the Alcatel 7x50 device. Copyright 2004-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

alxDot1xObjs 1.3.6.1.4.1.6527.3.3.2.3
OBJECT IDENTIFIER    

alxDot1xAuthenticatorObjs 1.3.6.1.4.1.6527.3.3.2.3.1
OBJECT IDENTIFIER    

alxDot1xRadiusObjs 1.3.6.1.4.1.6527.3.3.2.3.2
OBJECT IDENTIFIER    

alxDot1xConformance 1.3.6.1.4.1.6527.3.3.1.3
OBJECT IDENTIFIER    

alxDot1xAuthenticatorConformance 1.3.6.1.4.1.6527.3.3.1.3.1
OBJECT IDENTIFIER    

alxDot1xAuthenticatorCompliancs 1.3.6.1.4.1.6527.3.3.1.3.1.1
OBJECT IDENTIFIER    

alxDot1xAuthenticatorGroups 1.3.6.1.4.1.6527.3.3.1.3.1.2
OBJECT IDENTIFIER    

alxDot1xRadiusConformance 1.3.6.1.4.1.6527.3.3.1.3.2
OBJECT IDENTIFIER    

alxDot1xRadiusCompliancs 1.3.6.1.4.1.6527.3.3.1.3.2.1
OBJECT IDENTIFIER    

alxDot1xRadiusGroups 1.3.6.1.4.1.6527.3.3.1.3.2.2
OBJECT IDENTIFIER    

alxDot1xNotificationsPrefix 1.3.6.1.4.1.6527.3.3.3.3
OBJECT IDENTIFIER    

alxDot1xNotifications 1.3.6.1.4.1.6527.3.3.3.3.0
OBJECT IDENTIFIER    

alxdot1xAuthConfigTable 1.3.6.1.4.1.6527.3.3.2.3.1.1
The table alxdot1xAuthConfigTable allows configuration of RADIUS authentication parameters for the 802.1X PAE feature on port level.
OBJECT-TYPE    
  SEQUENCE OF  
    Alxdot1xAuthConfigEntry

alxDot1xAuthConfigEntry 1.3.6.1.4.1.6527.3.3.2.3.1.1.1
alxDot1xAuthConfigEntry is an entry (conceptual row) in the alxdot1xAuthConfigTable. Each entry represents the configuration for Radius Authentication on a port. Entries have a presumed StorageType of nonVolatile.
OBJECT-TYPE    
  Alxdot1xAuthConfigEntry  

alxDot1xAuthRadiusPlcy 1.3.6.1.4.1.6527.3.3.2.3.1.1.1.50
alxDot1xAuthRadiusPlcy specifies the name of the Radius Policy. The Radius Policy specifies the parameters that control the Radius Protocol. If no Policy is specified (empty string) no Radius authentication will be possible. This object can only be set to a policy that is defined in the alxdot1xRadiusServerPlcyTable.
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

alxDot1xRadiusServerPlcyTable 1.3.6.1.4.1.6527.3.3.2.3.2.1
The alxDot1xRadiusServerPlcyTable allows configuration of RADIUS authentication parameters for the 802.1X PAE feature.
OBJECT-TYPE    
  SEQUENCE OF  
    AlxDot1xRadiusServerPlcyEntry

alxDot1xRadiusServerPlcyEntry 1.3.6.1.4.1.6527.3.3.2.3.2.1.1
alxDot1xRadiusServerPlcyEntry is an entry (conceptual row) in the alxDot1xRadiusServerPlcyTable. Each entry represents the configuration for a 802.1X Radius Policy. Entries in this table can be created and deleted via SNMP SET operations to alxDot1xRadiusPlcyRowStatus. Entries have a presumed StorageType of nonVolatile.
OBJECT-TYPE    
  AlxDot1xRadiusServerPlcyEntry  

alxDot1xRadiusPlcyName 1.3.6.1.4.1.6527.3.3.2.3.2.1.1.1
The value of the object alxDot1xRadiusPlcyName specifies a specific radius server Policy to be used for 802.1X authentication.
OBJECT-TYPE    
  TNamedItem  

alxDot1xRadiusPlcySrceAddr 1.3.6.1.4.1.6527.3.3.2.3.2.1.1.2
The value of the object alxDot1xRadiusPlcySrceAddr specifies the source address of the Radius packet. It must be a valid unicast address. (otherwise a wrongValue error is returned.) If this object is configured with the address of the router interface, the Radius client uses it while making a request to the server. If the address is not configured or is not the address of the one of interfaces, the source address is based on the address of the Radius server. If the server address is in-band, the client uses the system ip address. If it is out-of-band, the source address is the address of the management interface.
OBJECT-TYPE    
  IpAddress  

alxDot1xRadiusPlcyAdminState 1.3.6.1.4.1.6527.3.3.2.3.2.1.1.3
The value of the object alxDot1xRadiusPlcyAdminState specifies a specific radius server Policy to be used for 802.1x authentication.
OBJECT-TYPE    
  ServiceAdminStatus  

alxDot1xRadiusPlcyRowStatus 1.3.6.1.4.1.6527.3.3.2.3.2.1.1.4
alxDot1xRadiusPlcyRowStatus controls the creation and deletion of rows in the table.
OBJECT-TYPE    
  RowStatus  

alxDot1xRadiusPlcyRetryAttempts 1.3.6.1.4.1.6527.3.3.2.3.2.1.1.5
The value of the object alxDot1xRadiusPlcyRetryAttempts specifies the number of RADIUS requests towards the same RADIUS server.
OBJECT-TYPE    
  Unsigned32 1..10  

alxDot1xRadiusPlcyTimeout 1.3.6.1.4.1.6527.3.3.2.3.2.1.1.6
The value of alxDot1xRadiusPlcyTimeout specifies the time, in seconds, between request retries towards the same RADIUS server.
OBJECT-TYPE    
  Unsigned32 1..90  

alxDot1xRadiusServerTable 1.3.6.1.4.1.6527.3.3.2.3.2.2
The alxDot1xRadiusServerTable has an entry for each RADIUS server used for 802.1x authentication.
OBJECT-TYPE    
  SEQUENCE OF  
    AlxDot1xRadiusServerEntry

alxDot1xRadiusServerEntry 1.3.6.1.4.1.6527.3.3.2.3.2.2.1
alxDot1xRadiusServerEntry is an entry (conceptual row) in the alxDot1xRadiusServerTable. Each entry represents the configuration for a RADIUS server. Entries in this table can be created and deleted via SNMP SET operations on alxDot1xRadiusServerRowStatus.
OBJECT-TYPE    
  AlxDot1xRadiusServerEntry  

alxDot1xRadiusServerPlcyName 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.1
The value of the object alxDot1xRadiusServerPlcyName specifies the radius server Policy to be used for 802.1x authentication as defined in the alxDot1xRadiusServerPlcyTable. Row creation will be denied if no policy with the same name does not occur in the alxDot1xRadiusServerPlcyTable.
OBJECT-TYPE    
  TNamedItem  

alxDot1xRadiusServerIndex 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.2
The value of the object alxDot1xRadiusServerIndex specifies a specific radius server in the policy.
OBJECT-TYPE    
  Unsigned32 1..5  

alxDot1xRadiusServerAddress 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.3
The value of the object alxDot1xRadiusServerAddress specifies the IP address of the RADIUS server. A valid unicast IP address must be specified for row creation to succeed.
OBJECT-TYPE    
  IpAddress  

alxDot1xRadiusServerSecret 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.4
The value of the object alxDot1xRadiusServerSecret specifies the secret key associated with the RADIUS server. An Empty key is not accepted.
OBJECT-TYPE    
  STRING Size(1..20)  

alxDot1xRadiusServerAuthPort 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.5
The value of the object alxDot1xRadiusServerAuthPort specifies the UDP port number on which to contact the RADIUS server for authentication.
OBJECT-TYPE    
  Unsigned32 1..65535  

alxDot1xRadiusServerOperStatus 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.6
The value of the object alxDot1xRadiusServerOperStatus indicates the current status of the RADIUS server.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alxDot1xRadiusServerRowStatus 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.7
alxDot1xRadiusServerRowStatus controls the creation and deletion of rows in the table.
OBJECT-TYPE    
  RowStatus  

alxDot1xRadiusServerType 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.8
The value of the object alxDot1xRadiusServerType indicates the type of the RADIUS server.
OBJECT-TYPE    
  AlxDot1xRadiusServerType  

alxDot1xRadiusServerAcctPort 1.3.6.1.4.1.6527.3.3.2.3.2.2.1.9
The value of the object alxDot1xRadiusServerAcctPort specifies the UDP port number on which to contact the RADIUS server for accounting.
OBJECT-TYPE    
  Unsigned32 1..65535  

alxDot1xAuthConfigGroup 1.3.6.1.4.1.6527.3.3.1.3.1.2.1
The group of objects supporting management of Radius authentication for the IEEE801.1X PAE feature on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

alxDot1xRadiusPlcyGroup 1.3.6.1.4.1.6527.3.3.1.3.2.2.1
The group of objects supporting management of Radius authentication for the IEEE801.1X PAE feature on Alcatel 7x50 SR series systems.
OBJECT-GROUP    

alxDot1xAuthenticatorCompliance 1.3.6.1.4.1.6527.3.3.1.3.1.1.1
The compliance statement for management of Radius authentication for the IEEE801.1X PAE feature on Alcatel 7x50 SR series systems.
MODULE-COMPLIANCE