AIRESPACE-SWITCHING-MIB

File: AIRESPACE-SWITCHING-MIB.mib (154404 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
AIRESPACE-REF-MIB Q-BRIDGE-MIB IANAifType-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Counter32 Integer32
Unsigned32 TimeTicks MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP DisplayString
PhysAddress RowStatus MacAddress
TruthValue airespace dot1qVlanIndex
dot1qFdbId IANAifType

Defined Types

AgentTrapLogEntry  
SEQUENCE    
  agentTrapLogIndex Integer32
  agentTrapLogSystemTime DisplayString
  agentTrapLogTrap OCTET STRING

AgentWcpControllerInfoEntry  
SEQUENCE    
  agentWcpControllerInfoSlotNumber Unsigned32
  agentWcpControllerInfoPortNumber Unsigned32
  agentWcpControllerInfoIpAddress IpAddress

AgentLoginSessionEntry  
SEQUENCE    
  agentLoginSessionIndex Integer32
  agentLoginSessionUserName DisplayString
  agentLoginSessionIPAddress IpAddress
  agentLoginSessionConnectionType INTEGER
  agentLoginSessionIdleTime TimeTicks
  agentLoginSessionSessionTime TimeTicks
  agentLoginSessionStatus RowStatus

AgentLagSummaryConfigEntry  
SEQUENCE    
  agentLagSummaryName DisplayString
  agentLagSummaryLagIndex Integer32
  agentLagSummaryFlushTimer Integer32
  agentLagSummaryLinkTrap INTEGER
  agentLagSummaryAdminMode INTEGER
  agentLagSummaryStpMode INTEGER
  agentLagSummaryAddPort Integer32
  agentLagSummaryDeletePort Integer32
  agentLagSummaryPortsBitMask Unsigned32
  agentLagSummaryStatus RowStatus

AgentLagDetailedConfigEntry  
SEQUENCE    
  agentLagDetailedLagIndex Integer32
  agentLagDetailedIfIndex Integer32
  agentLagDetailedPortSpeed OBJECT IDENTIFIER

AgentNetworkRouteConfigEntry  
SEQUENCE    
  agentNetworkRouteIPAddress IpAddress
  agentNetworkRouteIPNetmask IpAddress
  agentNetworkRouteGateway IpAddress
  agentNetworkRouteStatus RowStatus

AgentInterfaceConfigEntry  
SEQUENCE    
  agentInterfaceName OCTET STRING
  agentInterfaceVlanId Integer32
  agentInterfaceType INTEGER
  agentInterfaceMacAddress MacAddress
  agentInterfaceIPAddress IpAddress
  agentInterfaceIPNetmask IpAddress
  agentInterfaceIPGateway IpAddress
  agentInterfacePortNo Integer32
  agentInterfaceActivePortNo Integer32
  agentInterfaceBackupPortNo Integer32
  agentInterfacePrimaryDhcpAddress IpAddress
  agentInterfaceSecondaryDhcpAddress IpAddress
  agentInterfaceDhcpProtocol INTEGER
  agentInterfaceDnsHostName DisplayString
  agentInterfaceAclName DisplayString
  agentInterfaceAPManagementFeature INTEGER
  agentInterfaceRowStatus RowStatus
  agentInterfaceVlanQuarantine TruthValue

AgentNtpServerEntry  
SEQUENCE    
  agentNtpServerIndex Integer32
  agentNtpServerAddress IpAddress
  agentNtpServerRowStatus RowStatus

AgentDhcpScopeEntry  
SEQUENCE    
  agentDhcpScopeIndex Unsigned32
  agentDhcpScopeName DisplayString
  agentDhcpScopeLeaseTime Integer32
  agentDhcpScopeNetwork IpAddress
  agentDhcpScopeNetmask IpAddress
  agentDhcpScopePoolStartAddress IpAddress
  agentDhcpScopePoolEndAddress IpAddress
  agentDhcpScopeDefaultRouterAddress1 IpAddress
  agentDhcpScopeDefaultRouterAddress2 IpAddress
  agentDhcpScopeDefaultRouterAddress3 IpAddress
  agentDhcpScopeDnsDomainName DisplayString
  agentDhcpScopeDnsServerAddress1 IpAddress
  agentDhcpScopeDnsServerAddress2 IpAddress
  agentDhcpScopeDnsServerAddress3 IpAddress
  agentDhcpScopeNetbiosNameServerAddress1 IpAddress
  agentDhcpScopeNetbiosNameServerAddress2 IpAddress
  agentDhcpScopeNetbiosNameServerAddress3 IpAddress
  agentDhcpScopeState INTEGER
  agentDhcpScopeRowStatus RowStatus

AgentSnmpCommunityConfigEntry  
SEQUENCE    
  agentSnmpCommunityName DisplayString
  agentSnmpCommunityIPAddress IpAddress
  agentSnmpCommunityIPMask IpAddress
  agentSnmpCommunityAccessMode INTEGER
  agentSnmpCommunityEnabled INTEGER
  agentSnmpCommunityStatus RowStatus

AgentSnmpTrapReceiverConfigEntry  
SEQUENCE    
  agentSnmpTrapReceiverName OCTET STRING
  agentSnmpTrapReceiverIPAddress IpAddress
  agentSnmpTrapReceiverEnabled INTEGER
  agentSnmpTrapReceiverStatus RowStatus

AgentSnmpV3UserConfigEntry  
SEQUENCE    
  agentSnmpV3UserName OCTET STRING
  agentSnmpV3UserAccessMode INTEGER
  agentSnmpV3UserAuthenticationType INTEGER
  agentSnmpV3UserEncryptionType INTEGER
  agentSnmpV3UserAuthenticationPassword OCTET STRING
  agentSnmpV3UserEncryptionPassword OCTET STRING
  agentSnmpV3UserStatus RowStatus

AgentSwitchAddressAgingTimeoutEntry  
SEQUENCE    
  agentSwitchAddressAgingTimeout Integer32

AgentDot3adAggPortEntry  
SEQUENCE    
  agentDot3adAggPort Integer32
  agentDot3adAggPortLACPMode INTEGER

AgentPortConfigEntry  
SEQUENCE    
  agentPortDot1dBasePort Integer32
  agentPortIfIndex Integer32
  agentPortIanaType IANAifType
  agentPortSTPMode INTEGER
  agentPortSTPState INTEGER
  agentPortAdminMode INTEGER
  agentPortPhysicalMode INTEGER
  agentPortPhysicalStatus INTEGER
  agentPortLinkTrapMode INTEGER
  agentPortClearStats INTEGER
  agentPortDefaultType OBJECT IDENTIFIER
  agentPortType OBJECT IDENTIFIER
  agentPortAutoNegAdminStatus INTEGER
  agentPortDot3FlowControlMode INTEGER
  agentPortPowerMode INTEGER
  agentPortGvrpStatus INTEGER
  agentPortGarpJoinTime Unsigned32
  agentPortGarpLeaveTime Unsigned32
  agentPortGarpLeaveAllTime Unsigned32
  agentPortMirrorMode INTEGER
  agentPortMulticastApplianceMode INTEGER
  agentPortOperationalStatus INTEGER

PortStatsEntry  
SEQUENCE    
  portStatsIndex Integer32
  portStatsPktsTx64Octets Counter32
  portStatsPktsTx65to127Octets Counter32
  portStatsPktsTx128to255Octets Counter32
  portStatsPktsTx256to511Octets Counter32
  portStatsPktsTx512to1023Octets Counter32
  portStatsPktsTx1024to1518Octets Counter32
  portStatsPktsRx1519to1530Octets Counter32
  portStatsPktsTx1519to1530Octets Counter32
  portStatsPktsTxOversizeOctets Counter32

Defined Values

bsnSwitching 1.3.6.1.4.1.14179.1
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration, statistics and status information about the controller. This includes controller statistics and provides information such as Inventory, Trap logs, memory and CPU. This MIB also provides configuration of CLI, SNMP, LAG, DHCP, Spanning Tree, etc. The relationship between controller and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Station Management (SMT) This term refers to the internal management of the 802.11 protocol operations by the AP to work cooperatively with the other APs and 802.11 devices in the network. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.
MODULE-IDENTITY    

agentInfoGroup 1.3.6.1.4.1.14179.1.1
OBJECT IDENTIFIER    

agentConfigGroup 1.3.6.1.4.1.14179.1.2
OBJECT IDENTIFIER    

agentSystemGroup 1.3.6.1.4.1.14179.1.3
OBJECT IDENTIFIER    

stats 1.3.6.1.4.1.14179.1.4
OBJECT IDENTIFIER    

switchingTraps 1.3.6.1.4.1.14179.1.50
OBJECT IDENTIFIER    

bsnSwitchingGroups 1.3.6.1.4.1.14179.1.51
OBJECT IDENTIFIER    

bsnSwitchingCompliances 1.3.6.1.4.1.14179.1.52
OBJECT IDENTIFIER    

agentInventoryGroup 1.3.6.1.4.1.14179.1.1.1
OBJECT IDENTIFIER    

agentInventorySysDescription 1.3.6.1.4.1.14179.1.1.1.1
The switch's Inventory system description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryMachineType 1.3.6.1.4.1.14179.1.1.1.2
Type of the Machine used in the Switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryMachineModel 1.3.6.1.4.1.14179.1.1.1.3
The switch's Machine Model.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventorySerialNumber 1.3.6.1.4.1.14179.1.1.1.4
Serial number of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryMaintenanceLevel 1.3.6.1.4.1.14179.1.1.1.6
The switch's Inventory Maintenance Level
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryBurnedInMacAddress 1.3.6.1.4.1.14179.1.1.1.9
Burned-In MAC Address
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentInventoryOperatingSystem 1.3.6.1.4.1.14179.1.1.1.10
Operating System running on this unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryManufacturerName 1.3.6.1.4.1.14179.1.1.1.12
Name of the switch manufacturer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryProductName 1.3.6.1.4.1.14179.1.1.1.13
Name of the product.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryProductVersion 1.3.6.1.4.1.14179.1.1.1.14
Version of the product.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryIsGigECardPresent 1.3.6.1.4.1.14179.1.1.1.15
True if the Switch contains a Gigabit ethernet card .
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

agentInventoryIsCryptoCardPresent 1.3.6.1.4.1.14179.1.1.1.16
True if the switch is carrying a Crypto card.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

agentInventoryIsForeignAPSupported 1.3.6.1.4.1.14179.1.1.1.17
States whether the switch supports third party Access Points.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

agentInventoryMaxNumberOfAPsSupported 1.3.6.1.4.1.14179.1.1.1.18
Maximum number of APs supported with this Controller.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentInventoryIsCryptoCard2Present 1.3.6.1.4.1.14179.1.1.1.19
True if the switch is carrying second Crypto card for 4400 controller.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

agentInventoryFipsModeEnabled 1.3.6.1.4.1.14179.1.1.1.20
True if FIPS (Federal Information Processing Standards) mode has been enabled on the controller.False if FIPS mode has not been enabled. FIPS mode can only be enabled through console.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

agentTrapLogGroup 1.3.6.1.4.1.14179.1.1.2
OBJECT IDENTIFIER    

agentTrapLogTotal 1.3.6.1.4.1.14179.1.1.2.1
The total number of traps sent since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentTrapLogTotalSinceLastViewed 1.3.6.1.4.1.14179.1.1.2.3
The number of traps sent since last viewed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentRadioUpDownTrapCount 1.3.6.1.4.1.14179.1.1.2.5
The total number of AP Up/Down traps sent since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentApAssociateDisassociateTrapCount 1.3.6.1.4.1.14179.1.1.2.6
The total number of AP Associate/Disassociate traps sent since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentApLoadProfileFailTrapCount 1.3.6.1.4.1.14179.1.1.2.7
The total number of AP Load Profile Failure traps sent since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentApNoiseProfileFailTrapCount 1.3.6.1.4.1.14179.1.1.2.8
The total number of AP Noise Profile Failure traps sent since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentApInterferenceProfileFailTrapCount 1.3.6.1.4.1.14179.1.1.2.9
The total number of AP Interference Profile Failure traps sent since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentApCoverageProfileFailTrapCount 1.3.6.1.4.1.14179.1.1.2.10
The total number of AP Coverge Profile Failure traps sent since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentTrapLogTable 1.3.6.1.4.1.14179.1.1.2.4
Agent Trap Log
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentTrapLogEntry

agentTrapLogEntry 1.3.6.1.4.1.14179.1.1.2.4.1
Agent trap log entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentTrapLogEntry  

agentTrapLogIndex 1.3.6.1.4.1.14179.1.1.2.4.1.1
Unique index of trap entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentTrapLogSystemTime 1.3.6.1.4.1.14179.1.1.2.4.1.2
System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentTrapLogTrap 1.3.6.1.4.1.14179.1.1.2.4.1.22
Description of the trap sent.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

agentSwitchInfoGroup 1.3.6.1.4.1.14179.1.1.3
OBJECT IDENTIFIER    

agentSwitchInfoLwappTransportMode 1.3.6.1.4.1.14179.1.1.3.1
The LWAPP transport mode specifies if the switch is operating in Layer2 or Layer3 mode. This attribute gives the current mode the switch is operating on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER layer2(1), layer3(2)  

agentSwitchInfoPowerSupply1Present 1.3.6.1.4.1.14179.1.1.3.2
This is to indicate if the switch has Power Supply 1 present on it. This is applicable to the 4200 series and will always return true for the earlier device versions.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

agentSwitchInfoPowerSupply1Operational 1.3.6.1.4.1.14179.1.1.3.3
This is to indicate if the switch's Power Supply 1 is operational. This is applicable to the 4200 series and will always return true for the earlier device versions.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

agentSwitchInfoPowerSupply2Present 1.3.6.1.4.1.14179.1.1.3.4
This is to indicate if the switch has Power Supply 2 present on it. This is applicable to the 4200 series and will always return false for the earlier device versions.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

agentSwitchInfoPowerSupply2Operational 1.3.6.1.4.1.14179.1.1.3.5
This is to indicate if the switch's Power Supply 2 is operational.This is applicable to the 4200 series and will always return false for the earlier device versions.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

agentResourceInfoGroup 1.3.6.1.4.1.14179.1.1.5
OBJECT IDENTIFIER    

agentCurrentCPUUtilization 1.3.6.1.4.1.14179.1.1.5.1
Current CPU Load of the switch in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

agentTotalMemory 1.3.6.1.4.1.14179.1.1.5.2
Total RAM of the switch in Kbytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentFreeMemory 1.3.6.1.4.1.14179.1.1.5.3
Free RAM of the switch in Kbytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentWcpInfoGroup 1.3.6.1.4.1.14179.1.1.6
OBJECT IDENTIFIER    

agentWcpDeviceName 1.3.6.1.4.1.14179.1.1.6.1
This is the name of the device this controller is residing on.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

agentWcpSlotNumber 1.3.6.1.4.1.14179.1.1.6.2
The slot number on the Wcp Device that this controller is residing on.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..16  

agentWcpPortNumber 1.3.6.1.4.1.14179.1.1.6.3
The port number on the Wcp Device that this controller is residing on.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2  

agentWcpPeerPortNumber 1.3.6.1.4.1.14179.1.1.6.4
The port number of this controller's peer on the same slot on Wcp Device that this controller is residing on.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2  

agentWcpPeerIpAddress 1.3.6.1.4.1.14179.1.1.6.5
The IP Address of this controller's peer on the same slot on Wcp Device that this controller is residing on.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentWcpControllerTableChecksum 1.3.6.1.4.1.14179.1.1.6.6
This is the checksum that tracks the changes in the agentWcpControllerInfoTable. If there is any change in the information on this table, the checksum changes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentWcpControllerInfoTable 1.3.6.1.4.1.14179.1.1.6.7
A table of the wireless controllers on a WCP device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentWcpControllerInfoEntry

agentWcpControllerInfoEntry 1.3.6.1.4.1.14179.1.1.6.7.1
Entry for a wireless controller on a WCP device.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentWcpControllerInfoEntry  

agentWcpControllerInfoSlotNumber 1.3.6.1.4.1.14179.1.1.6.7.1.1
The slot number on the Wcp device that a controller is residing on.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..16  

agentWcpControllerInfoPortNumber 1.3.6.1.4.1.14179.1.1.6.7.1.2
The port number on the Wcp Device that a controller is residing on.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2  

agentWcpControllerInfoIpAddress 1.3.6.1.4.1.14179.1.1.6.7.1.10
The management IP Address of a controller.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentProductGroup 1.3.6.1.4.1.14179.1.1.4
OBJECT IDENTIFIER    

productGroup1 1.3.6.1.4.1.14179.1.1.4.1
OBJECT IDENTIFIER    

productGroup2 1.3.6.1.4.1.14179.1.1.4.2
OBJECT IDENTIFIER    

productGroup3 1.3.6.1.4.1.14179.1.1.4.3
OBJECT IDENTIFIER    

productGroup4 1.3.6.1.4.1.14179.1.1.4.4
OBJECT IDENTIFIER    

agentCLIConfigGroup 1.3.6.1.4.1.14179.1.2.1
OBJECT IDENTIFIER    

agentLoginSessionTable 1.3.6.1.4.1.14179.1.2.1.1
A table of the switch's login session
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentLoginSessionEntry

agentLoginSessionEntry 1.3.6.1.4.1.14179.1.2.1.1.1
Login Session Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentLoginSessionEntry  

agentLoginSessionIndex 1.3.6.1.4.1.14179.1.2.1.1.1.1
Agent Login Session Index of the switch
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentLoginSessionUserName 1.3.6.1.4.1.14179.1.2.1.1.1.2
Agent Login Session UserName of the switch
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentLoginSessionIPAddress 1.3.6.1.4.1.14179.1.2.1.1.1.3
Agent Login Session IP Address of the switch
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentLoginSessionConnectionType 1.3.6.1.4.1.14179.1.2.1.1.1.4
Agent Login Session Connection Type of the switch
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER serial(1), telnet(2), web(3), ssl(4)  

agentLoginSessionIdleTime 1.3.6.1.4.1.14179.1.2.1.1.1.5
Agent Login Session Idle Time of the switch
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

agentLoginSessionSessionTime 1.3.6.1.4.1.14179.1.2.1.1.1.6
Agent Login Session Time of the switch
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

agentLoginSessionStatus 1.3.6.1.4.1.14179.1.2.1.1.1.26
Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

agentTelnetConfigGroup 1.3.6.1.4.1.14179.1.2.1.2
OBJECT IDENTIFIER    

agentTelnetLoginTimeout 1.3.6.1.4.1.14179.1.2.1.2.1
Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 0 to 160. A value of 0 indicates that a Telnet session remains active indefinitely. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..160  

agentTelnetMaxSessions 1.3.6.1.4.1.14179.1.2.1.2.2
Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..5  

agentTelnetAllowNewMode 1.3.6.1.4.1.14179.1.2.1.2.3
Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSSHAllowNewMode 1.3.6.1.4.1.14179.1.2.1.2.4
Allow new SSH sessions (enable or disable) Config SSH disable means that no new SSH sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSerialGroup 1.3.6.1.4.1.14179.1.2.1.5
OBJECT IDENTIFIER    

agentSerialTimeout 1.3.6.1.4.1.14179.1.2.1.5.1
Agent Serial Timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agentSerialBaudrate 1.3.6.1.4.1.14179.1.2.1.5.2
Agent Serial Baudrate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER baud1200(1), baud2400(2), baud4800(3), baud9600(4), baud19200(5), baud38400(6), baud57600(7), baud115200(8)  

agentSerialCharacterSize 1.3.6.1.4.1.14179.1.2.1.5.3
Agent Serial Character Size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentSerialHWFlowControlMode 1.3.6.1.4.1.14179.1.2.1.5.4
Agent Serial Hardware Flow Control.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSerialStopBits 1.3.6.1.4.1.14179.1.2.1.5.5
Agent Serial Stop Bits
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentSerialParityType 1.3.6.1.4.1.14179.1.2.1.5.6
Agent Serial Parity Type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER even(1), odd(2), none(3)  

agentLagConfigGroup 1.3.6.1.4.1.14179.1.2.2
OBJECT IDENTIFIER    

agentLagConfigCreate 1.3.6.1.4.1.14179.1.2.2.1
Agent Lag Create. When this object is set with a non-empty string, a new lag will be created.if possible with the entered string as it's name.
Status: obsolete Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..15)  

agentLagSummaryConfigTable 1.3.6.1.4.1.14179.1.2.2.2
A summary table of the switch's lag config entries
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentLagSummaryConfigEntry

agentLagSummaryConfigEntry 1.3.6.1.4.1.14179.1.2.2.2.1
Switch's lag config entry
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AgentLagSummaryConfigEntry  

agentLagSummaryName 1.3.6.1.4.1.14179.1.2.2.2.1.1
Agent Lag Name
Status: obsolete Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..15)  

agentLagSummaryLagIndex 1.3.6.1.4.1.14179.1.2.2.2.1.2
Agent Lag If Index
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

agentLagSummaryFlushTimer 1.3.6.1.4.1.14179.1.2.2.2.1.3
Agent Lag Flush Timer
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32  

agentLagSummaryLinkTrap 1.3.6.1.4.1.14179.1.2.2.2.1.4
Agent Lag Link Trap
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLagSummaryAdminMode 1.3.6.1.4.1.14179.1.2.2.2.1.5
Agent Lag Admin Mode
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLagSummaryStpMode 1.3.6.1.4.1.14179.1.2.2.2.1.6
Agent Lag STP Mode
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER dot1d(1), fast(2), off(3)  

agentLagSummaryAddPort 1.3.6.1.4.1.14179.1.2.2.2.1.7
Agent Lag Add Port. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32  

agentLagSummaryDeletePort 1.3.6.1.4.1.14179.1.2.2.2.1.8
Agent Lag Delete Port
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32  

agentLagSummaryPortsBitMask 1.3.6.1.4.1.14179.1.2.2.2.1.9
Agent Lag Member Ports in bit mask representation
Status: obsolete Access: read-create
OBJECT-TYPE    
  Unsigned32  

agentLagSummaryStatus 1.3.6.1.4.1.14179.1.2.2.2.1.30
Agent Lag Status. active(1) - This Lag is enabled. destroy(6) - Set to this value to remove the Lag.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

agentLagDetailedConfigTable 1.3.6.1.4.1.14179.1.2.2.3
A detailed table of the switch's lag config entries
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentLagDetailedConfigEntry

agentLagDetailedConfigEntry 1.3.6.1.4.1.14179.1.2.2.3.1
Switch's lag config entry
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AgentLagDetailedConfigEntry  

agentLagDetailedLagIndex 1.3.6.1.4.1.14179.1.2.2.3.1.1
Lag index
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

agentLagDetailedIfIndex 1.3.6.1.4.1.14179.1.2.2.3.1.2
Lag port index
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

agentLagDetailedPortSpeed 1.3.6.1.4.1.14179.1.2.2.3.1.22
Lag port speed. See agentPortType for description and list of valid values.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

agentLagConfigMode 1.3.6.1.4.1.14179.1.2.2.4
The Lag Mode on the 4400 series controller. When it is on, all the gigabit ports are bound to one aggregated link.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

agentNetworkConfigGroup 1.3.6.1.4.1.14179.1.2.3
OBJECT IDENTIFIER    

agentNetworkIPAddress 1.3.6.1.4.1.14179.1.2.3.1
The switch's network ip address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentNetworkSubnetMask 1.3.6.1.4.1.14179.1.2.3.2
The switch's network subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentNetworkDefaultGateway 1.3.6.1.4.1.14179.1.2.3.3
The switch's network default gateway
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentNetworkBurnedInMacAddress 1.3.6.1.4.1.14179.1.2.3.4
The switch's Burned-In MAC address
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentNetworkConfigProtocol 1.3.6.1.4.1.14179.1.2.3.7
The switch's network config protocol
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), bootp(2), dhcp(3)  

agentNetworkWebMode 1.3.6.1.4.1.14179.1.2.3.8
The switch's web access mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentNetworkSecureWebMode 1.3.6.1.4.1.14179.1.2.3.9
If https is enable or not provided web mode is enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentNetworkMulticastMode 1.3.6.1.4.1.14179.1.2.3.10
Switch's ethernet multicast support. disable- multicast is disabled multicast - Multicast is enabled. unicast- Controller will convert multicast to unicast packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), unicast(1), multicast(2)  

agentNetworkDsPortNumber 1.3.6.1.4.1.14179.1.2.3.11
The switch's distribution port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agentNetworkUserIdleTimeout 1.3.6.1.4.1.14179.1.2.3.12
Sets the idle user timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..2147483647  

agentNetworkArpTimeout 1.3.6.1.4.1.14179.1.2.3.13
Sets the ARP entry timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..2147483647  

agentNetworkManagementVlan 1.3.6.1.4.1.14179.1.2.3.14
VLAN ID of the network management interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4095  

agentNetworkGvrpStatus 1.3.6.1.4.1.14179.1.2.3.15
The state of GVRP operation on the Switch. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port.(Attribute No longer supported)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(0)  

agentNetworkAllowMgmtViaWireless 1.3.6.1.4.1.14179.1.2.3.16
This states whether Management via wireless is allowed or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentNetworkBroadcastSsidMode 1.3.6.1.4.1.14179.1.2.3.17
This mode when enabled allows WLAN SSIDs to be broadcasted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentNetworkSecureWebPassword 1.3.6.1.4.1.14179.1.2.3.18
SSL Certificate Password. This can be optionally set while downloading SSL certificates of type Web Admin and Web Authentication
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

agentNetworkWebAdminCertType 1.3.6.1.4.1.14179.1.2.3.19
Type of currently existing Web Admin Certificate installed on the Switch. It could be 'Empty' if the certificate is not present, 'Locally Generated' if the certificate is locally generated or it could have a name if it is downloaded externally.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..80)  

agentNetworkWebAdminCertRegenerateCmdInvoke 1.3.6.1.4.1.14179.1.2.3.20
This command when set to 'activate' will regenerate a Web Administration Certificate Locally that will replace the existing certificate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), activate(1)  

agentNetworkWebAuthCertType 1.3.6.1.4.1.14179.1.2.3.21
Type of currently exisitng Web Authentication Certificate installed on the Switch. It could be 'Empty' if the certificate is not present, 'Locally Generated' if the certificate is locally generated or it could have a name if it is downloaded externally.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..80)  

agentNetworkWebAuthCertRegenerateCmdInvoke 1.3.6.1.4.1.14179.1.2.3.22
This command when set to 'activate' will regenerate a Web Authentication Certificate Locally that will replace the existing certificate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), activate(1)  

agentNetworkPeerToPeerBlockingMode 1.3.6.1.4.1.14179.1.2.3.24
Mobile Peer to Peer Blocking mode on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentNetworkMulticastGroupAddress 1.3.6.1.4.1.14179.1.2.3.25
Multicast group address for access points.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentNetworkRouteConfigTable 1.3.6.1.4.1.14179.1.2.3.23
A table of the switch's Network Route entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentNetworkRouteConfigEntry

agentNetworkRouteConfigEntry 1.3.6.1.4.1.14179.1.2.3.23.1
Switch's Network Route entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentNetworkRouteConfigEntry  

agentNetworkRouteIPAddress 1.3.6.1.4.1.14179.1.2.3.23.1.1
Network Route IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentNetworkRouteIPNetmask 1.3.6.1.4.1.14179.1.2.3.23.1.2
Network Route IP Netmask.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentNetworkRouteGateway 1.3.6.1.4.1.14179.1.2.3.23.1.3
Network Route IP Gateway.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentNetworkRouteStatus 1.3.6.1.4.1.14179.1.2.3.23.1.23
Network Route Row Status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentInterfaceConfigTable 1.3.6.1.4.1.14179.1.2.13
A table of the switch's Interface Config entries Typically, it will contain entries for Service Port Interface, DS Port Interface and Virtual Gateway Interface apart from other entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentInterfaceConfigEntry

agentInterfaceConfigEntry 1.3.6.1.4.1.14179.1.2.13.1
Switch's Interface Config entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentInterfaceConfigEntry  

agentInterfaceName 1.3.6.1.4.1.14179.1.2.13.1.1
Interace Name. This values is 'management' for DS port, 'service-port' for service port and 'virtual' for virtual gateway. For other interfaces, the name can be anything. These interfaces are already created by default.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

agentInterfaceVlanId 1.3.6.1.4.1.14179.1.2.13.1.2
Vlan ID configured for the Interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

agentInterfaceType 1.3.6.1.4.1.14179.1.2.13.1.3
The interface's type. The static type is set for the interfaces that are created by default on the switch and these cannot be deleted. Any other interface that is created is of type dynamic which can be deleted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

agentInterfaceMacAddress 1.3.6.1.4.1.14179.1.2.13.1.4
Interface MAC Address. This is only applicable in case of management and service-port interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

agentInterfaceIPAddress 1.3.6.1.4.1.14179.1.2.13.1.5
IP Address of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentInterfaceIPNetmask 1.3.6.1.4.1.14179.1.2.13.1.6
IP Netmask of the interface. This is 0 for the virtual interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentInterfaceIPGateway 1.3.6.1.4.1.14179.1.2.13.1.7
IP Gateway of the interface. This is 0 for virtual and service-port interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentInterfacePortNo 1.3.6.1.4.1.14179.1.2.13.1.8
A value 0 means the port is not set. The valid value can be any one of the physical ports on the switch. This is the primary port configured on the interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..25  

agentInterfacePrimaryDhcpAddress 1.3.6.1.4.1.14179.1.2.13.1.9
Primary DHCP Server IP Address for the interface This applies to the management interface and other dynamic interfaces.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentInterfaceSecondaryDhcpAddress 1.3.6.1.4.1.14179.1.2.13.1.10
Secondary DHCP Server IP Address for the interface. This applies to the management interface and other dynamic interfaces.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentInterfaceDhcpProtocol 1.3.6.1.4.1.14179.1.2.13.1.11
The interface's DHCP protocol. This applies only to the service port interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

agentInterfaceDnsHostName 1.3.6.1.4.1.14179.1.2.13.1.12
The DNS host name for the Virtual Interface. This attribute is not valid for other interfaces.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..80)  

agentInterfaceAclName 1.3.6.1.4.1.14179.1.2.13.1.13
Name of the Access Control List applied to the interface. This attribute is applicable only to the management interface and other dynamic interfaces. If it is required to remove the ACL name for an interface, it should be set to an empty string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

agentInterfaceAPManagementFeature 1.3.6.1.4.1.14179.1.2.13.1.14
When enabled, the dynamic interface can be used for AP management. SNMP support for AP management through dynamic interfaces has been introduced since '3.0.21.0' release. Only applicable to dynamic interfaces in 4200 series. In static interfaces, 'disable' value 0 is returned. In 4000/3500 series of switches, 'disable' value 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentInterfaceActivePortNo 1.3.6.1.4.1.14179.1.2.13.1.15
This is the currently active port for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..25  

agentInterfaceBackupPortNo 1.3.6.1.4.1.14179.1.2.13.1.16
This values is valid only for the 4200 series of switches. The backup port is the port this interface is moved to once the primary port fails. A value 0 means the port is not set. The valid value can be any one of the physical ports on the 4200 switch.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4  

agentInterfaceVlanQuarantine 1.3.6.1.4.1.14179.1.2.13.1.17
This object is used to configure the health of the interface identified by agentInterfaceName. A value of 'true' is used to indicate that this particular interface is unhealthy. In this case, the data packets of the clients, that are assigned the VLAN Id corresponding to this interface, must be tunneled to the Controller by the REAP AP. A value of 'false' indicates that the VLAN configured against the interface is healthy and that the REAP AP can switch the clients of this VLAN locally rather than tunneling them to the Controller.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

agentInterfaceRowStatus 1.3.6.1.4.1.14179.1.2.13.1.31
The interface entry Row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentNtpConfigGroup 1.3.6.1.4.1.14179.1.2.14
OBJECT IDENTIFIER    

agentNtpPollingInterval 1.3.6.1.4.1.14179.1.2.14.1
Network Time Protocol polling interval. Min value is one hour and maximum is a week.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3600..604800  

agentNtpServerTable 1.3.6.1.4.1.14179.1.2.14.2
A summary table for switch's lag config entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentNtpServerEntry

agentNtpServerEntry 1.3.6.1.4.1.14179.1.2.14.2.1
Switch's NTP Server entry. Upto 4 entries may be added.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentNtpServerEntry  

agentNtpServerIndex 1.3.6.1.4.1.14179.1.2.14.2.1.1
NTP Server priority index.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..3  

agentNtpServerAddress 1.3.6.1.4.1.14179.1.2.14.2.1.2
IP Address of the NTP Server
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentNtpServerRowStatus 1.3.6.1.4.1.14179.1.2.14.2.1.20
NTP server entry row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentDhcpConfigGroup 1.3.6.1.4.1.14179.1.2.15
OBJECT IDENTIFIER    

agentDhcpScopeTable 1.3.6.1.4.1.14179.1.2.15.1
A table listing the Scopes defined on the switch's DHCP Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcpScopeEntry

agentDhcpScopeEntry 1.3.6.1.4.1.14179.1.2.15.1.1
Switch's DHCP Server Scope entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcpScopeEntry  

agentDhcpScopeIndex 1.3.6.1.4.1.14179.1.2.15.1.1.1
DHCP Scope Identifier Index.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..15  

agentDhcpScopeName 1.3.6.1.4.1.14179.1.2.15.1.1.2
DHCP Scope Name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..79)  

agentDhcpScopeLeaseTime 1.3.6.1.4.1.14179.1.2.15.1.1.3
DHCP Scope Lease time in seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 120..8640000  

agentDhcpScopeNetwork 1.3.6.1.4.1.14179.1.2.15.1.1.4
IP Address of the DHCP Scope Network. This is the address which is used to determine the DHCP scope a remote Switch is attaching to.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeNetmask 1.3.6.1.4.1.14179.1.2.15.1.1.5
The DHCP Scope Netmask. This the subnet mask for the address pool.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopePoolStartAddress 1.3.6.1.4.1.14179.1.2.15.1.1.6
The DHCP Scope address pool start IP address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopePoolEndAddress 1.3.6.1.4.1.14179.1.2.15.1.1.7
The DHCP Scope address pool end IP address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeDefaultRouterAddress1 1.3.6.1.4.1.14179.1.2.15.1.1.8
IP Address of the DHCP Scope's default Router 1.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeDefaultRouterAddress2 1.3.6.1.4.1.14179.1.2.15.1.1.9
IP Address of the DHCP Scope's default Router 2.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeDefaultRouterAddress3 1.3.6.1.4.1.14179.1.2.15.1.1.10
IP Address of the DHCP Scope's default Router 3.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeDnsDomainName 1.3.6.1.4.1.14179.1.2.15.1.1.11
DNS Domain name for the DHCP Scope.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..79)  

agentDhcpScopeDnsServerAddress1 1.3.6.1.4.1.14179.1.2.15.1.1.12
IP Address of the DHCP Scope's DNS Server 1.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeDnsServerAddress2 1.3.6.1.4.1.14179.1.2.15.1.1.13
IP Address of the DHCP Scope's DNS Server 2.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeDnsServerAddress3 1.3.6.1.4.1.14179.1.2.15.1.1.14
IP Address of the DHCP Scope's DNS Server 3.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeNetbiosNameServerAddress1 1.3.6.1.4.1.14179.1.2.15.1.1.15
IP Address of DHCP Scope's Netbios Name Server 1.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeNetbiosNameServerAddress2 1.3.6.1.4.1.14179.1.2.15.1.1.16
IP Address of DHCP Scope's Netbios Name Server 2.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeNetbiosNameServerAddress3 1.3.6.1.4.1.14179.1.2.15.1.1.17
IP Address of DHCP Scope's Netbios Name Server 3.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentDhcpScopeState 1.3.6.1.4.1.14179.1.2.15.1.1.18
DHCP Scope's State.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentDhcpScopeRowStatus 1.3.6.1.4.1.14179.1.2.15.1.1.30
Dhcp Scope entry row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentServicePortConfigGroup 1.3.6.1.4.1.14179.1.2.4
OBJECT IDENTIFIER    

agentServicePortIPAddress 1.3.6.1.4.1.14179.1.2.4.1
The switch's Service Port IP address. (Service-port interface use is recommended instead of this group)
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

agentServicePortSubnetMask 1.3.6.1.4.1.14179.1.2.4.2
The switch's Service Port subnet mask. (Service-port interface in agentInterfaceConfigTable is recommended instead of this group)
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

agentServicePortDefaultGateway 1.3.6.1.4.1.14179.1.2.4.3
Not Supported for release 1.0. The switch's Service Port default gateway. (Service-port interface in agentInterfaceConfigTable is recommended instead of this group)
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

agentServicePortBurnedInMacAddress 1.3.6.1.4.1.14179.1.2.4.4
The switch's Service Port Burned-In MAC address (Service-port interface in agentInterfaceConfigTable is recommended instead of this group)
Status: obsolete Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentServicePortConfigProtocol 1.3.6.1.4.1.14179.1.2.4.5
The switch's Service Port config protocol (Service-port interface in agentInterfaceConfigTable is recommended instead of this group)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dhcp(3)  

agentSnmpConfigGroup 1.3.6.1.4.1.14179.1.2.5
OBJECT IDENTIFIER    

agentSnmpTrapPortNumber 1.3.6.1.4.1.14179.1.2.5.1
Snmp Trap Port Number
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65534  

agentSnmpVersion1Status 1.3.6.1.4.1.14179.1.2.5.2
Snmp Version 1 Status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentSnmpVersion2cStatus 1.3.6.1.4.1.14179.1.2.5.3
Snmp Version 2c Status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentSnmpCommunityConfigTable 1.3.6.1.4.1.14179.1.2.5.5
A table of the switch's SNMP community Config entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSnmpCommunityConfigEntry

agentSnmpCommunityConfigEntry 1.3.6.1.4.1.14179.1.2.5.5.1
Switch's SNMP community Config entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSnmpCommunityConfigEntry  

agentSnmpCommunityName 1.3.6.1.4.1.14179.1.2.5.5.1.1
The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..16)  

agentSnmpCommunityIPAddress 1.3.6.1.4.1.14179.1.2.5.5.1.2
The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentSnmpCommunityIPMask 1.3.6.1.4.1.14179.1.2.5.5.1.3
The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentSnmpCommunityAccessMode 1.3.6.1.4.1.14179.1.2.5.5.1.4
The switch's Snmp Community Access Mode Access Mode - This value can be readOnly or readWrite. A community with a read-only access allows for switch information to be displayed. A community with a readWrite access allows for configuration changes to be made and for information to be displayed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

agentSnmpCommunityEnabled 1.3.6.1.4.1.14179.1.2.5.5.1.5
If community is Enabled
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

agentSnmpCommunityStatus 1.3.6.1.4.1.14179.1.2.5.5.1.25
The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP manager associated with this community to manage the switch according to its access right. notInService(2) - This community is not active; no SNMP requests using this community will be accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to active(1). config(3) - The community Status must be set to this value in order to configure it. When creating a new community entry, initial Status will be set to this value. destroy(4) - Set to this value to remove the community from the agent.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentSnmpTrapReceiverConfigTable 1.3.6.1.4.1.14179.1.2.5.6
Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSnmpTrapReceiverConfigEntry

agentSnmpTrapReceiverConfigEntry 1.3.6.1.4.1.14179.1.2.5.6.1
Switch's Snmp Trap Receiver Config entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSnmpTrapReceiverConfigEntry  

agentSnmpTrapReceiverName 1.3.6.1.4.1.14179.1.2.5.6.1.1
The switch's Snmp Trap Receiver Name. This is the name of the remote network manager. the name can be up to 16 characters, and is case-sensitive.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

agentSnmpTrapReceiverIPAddress 1.3.6.1.4.1.14179.1.2.5.6.1.2
SNMP network Manager IP Address. The IP Address traps will be sent to. Each IP address parameter is four integer numbers. The numbers range from 0 to 255. After creation of entry IP Address cannot be changed.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agentSnmpTrapReceiverEnabled 1.3.6.1.4.1.14179.1.2.5.6.1.3
The flag to enable the trap receiver. If disabled, no traps are sent to this receiver's IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

agentSnmpTrapReceiverStatus 1.3.6.1.4.1.14179.1.2.5.6.1.23
This object is used to create and delete instances of this table. The row, when created with the row status value of 'createAndGo' or 'createAndWait' is moved to the 'active' state automatically by the agent and remains in that state till the time the row is removed through the 'destroy' option.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentSnmpTrapFlagsConfigGroup 1.3.6.1.4.1.14179.1.2.5.7
OBJECT IDENTIFIER    

agentSnmpAuthenticationTrapFlag 1.3.6.1.4.1.14179.1.2.5.7.1
Authentication Flag - Enable/Disable authentication Flag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSnmpLinkUpDownTrapFlag 1.3.6.1.4.1.14179.1.2.5.7.2
Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSnmpMultipleUsersTrapFlag 1.3.6.1.4.1.14179.1.2.5.7.3
Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSnmpSpanningTreeTrapFlag 1.3.6.1.4.1.14179.1.2.5.7.4
Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSnmpBroadcastStormTrapFlag 1.3.6.1.4.1.14179.1.2.5.7.5
Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSnmpV3ConfigGroup 1.3.6.1.4.1.14179.1.2.6
OBJECT IDENTIFIER    

agentSnmpVersion3Status 1.3.6.1.4.1.14179.1.2.6.1
Snmp Version 3 Status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentSnmpV3UserConfigTable 1.3.6.1.4.1.14179.1.2.6.2
User Config Table. Only creation and deletion of users is supported. All individual updates are not supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSnmpV3UserConfigEntry

agentSnmpV3UserConfigEntry 1.3.6.1.4.1.14179.1.2.6.2.1
User Config Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSnmpV3UserConfigEntry  

agentSnmpV3UserName 1.3.6.1.4.1.14179.1.2.6.2.1.1
Agent User Name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

agentSnmpV3UserAccessMode 1.3.6.1.4.1.14179.1.2.6.2.1.2
Agent User Access Mode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER readonly(1), readwrite(2)  

agentSnmpV3UserAuthenticationType 1.3.6.1.4.1.14179.1.2.6.2.1.3
SNMPv3 User Authentication none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), hmacmd5(2), hmacsha(3)  

agentSnmpV3UserEncryptionType 1.3.6.1.4.1.14179.1.2.6.2.1.4
SNMPv3 User Encryption Must be set to none(1) if agentSnmpV3UserAuthenticationType is set to none(1). Setting this object will set the encryption password to an empty string. none(1) - no encryption used des(1) - DES encryption used
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), des(2)  

agentSnmpV3UserAuthenticationPassword 1.3.6.1.4.1.14179.1.2.6.2.1.5
SNMPv3 User Encryption Password
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

agentSnmpV3UserEncryptionPassword 1.3.6.1.4.1.14179.1.2.6.2.1.6
SNMPv3 User Encryption Password
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

agentSnmpV3UserStatus 1.3.6.1.4.1.14179.1.2.6.2.1.26
Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentSpanningTreeConfigGroup 1.3.6.1.4.1.14179.1.2.7
OBJECT IDENTIFIER    

agentSpanningTreeMode 1.3.6.1.4.1.14179.1.2.7.1
The switch's Spanning Tree Switch Status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchConfigGroup 1.3.6.1.4.1.14179.1.2.8
OBJECT IDENTIFIER    

agentSwitchAddressAgingTimeoutTable 1.3.6.1.4.1.14179.1.2.8.4
The switch's address aging timeout table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSwitchAddressAgingTimeoutEntry

agentSwitchAddressAgingTimeoutEntry 1.3.6.1.4.1.14179.1.2.8.4.1
Aging information about a specific Filtering Database.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSwitchAddressAgingTimeoutEntry  

agentSwitchAddressAgingTimeout 1.3.6.1.4.1.14179.1.2.8.4.1.10
The FDB entry's address aging timeout(in seconds)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..1000000  

agentSwitchBroadcastControlMode 1.3.6.1.4.1.14179.1.2.8.2
The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the broadcast traffic until the broadcast traffic returns to 10 percent or less.Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2%
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDot3FlowControlMode 1.3.6.1.4.1.14179.1.2.8.3
Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchLwappTransportMode 1.3.6.1.4.1.14179.1.2.8.5
The LWAPP transport mode decides if the switch is operating in the Layer2 or Layer3 mode. The switch needs to be rebooted for the mode change to take effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER layer2(1), layer3(2)  

agentTransferConfigGroup 1.3.6.1.4.1.14179.1.2.9
OBJECT IDENTIFIER    

agentTransferUploadGroup 1.3.6.1.4.1.14179.1.2.9.1
OBJECT IDENTIFIER    

agentTransferUploadMode 1.3.6.1.4.1.14179.1.2.9.1.1
Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tftp(1), xmodem(2), ymodem(3), zmodem(4)  

agentTransferUploadServerIP 1.3.6.1.4.1.14179.1.2.9.1.2
Transfer upload tftpserverip configures the IP address of the server where the file will be uploaded. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentTransferUploadPath 1.3.6.1.4.1.14179.1.2.9.1.3
Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

agentTransferUploadFilename 1.3.6.1.4.1.14179.1.2.9.1.4
Transfer upload tftpfilename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c: ftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

agentTransferUploadDataType 1.3.6.1.4.1.14179.1.2.9.1.5
Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - System trace - Trap log - Crash File
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER config(2), errorlog(3), systemtrace(4), traplog(5), crashfile(6), signatures(7), unknown(99)  

agentTransferUploadStart 1.3.6.1.4.1.14179.1.2.9.1.6
Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentTransferUploadStatus 1.3.6.1.4.1.14179.1.2.9.1.7
Indicates the current status of an upload transfer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notInitiated(1), transferStarting(2), errorStarting(3), wrongFileType(4), updatingConfig(5), invalidConfigFile(6), writingToFlash(7), failureWritingToFlash(8), checkingCRC(9), failedCRC(10), unknownDirection(11), transferSuccessful(12), transferFailed(13), unknown(99)  

agentTransferConfigurationFileEncryption 1.3.6.1.4.1.14179.1.2.9.3
The configuration file can be encrypted before tftp upload from the switch and then decrypted before downloading to the switch when this option is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentTransferConfigurationFileEncryptionKey 1.3.6.1.4.1.14179.1.2.9.4
This is the key to be used when encrypting the configuration file while upload from the switch or while decrypting the file after download to the switch.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

agentTransferDownloadGroup 1.3.6.1.4.1.14179.1.2.9.2
OBJECT IDENTIFIER    

agentTransferDownloadMode 1.3.6.1.4.1.14179.1.2.9.2.1
Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tftp(1), xmodem(2), ymodem(3), zmodem(4)  

agentTransferDownloadServerIP 1.3.6.1.4.1.14179.1.2.9.2.2
Transfer download tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agentTransferDownloadPath 1.3.6.1.4.1.14179.1.2.9.2.3
Transfer download tftppath configures the directory path where the file is located. The switch remembers the last file path used.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

agentTransferDownloadFilename 1.3.6.1.4.1.14179.1.2.9.2.4
Transfer download tftpfilename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 33 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c: ftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

agentTransferDownloadDataType 1.3.6.1.4.1.14179.1.2.9.2.5
Transfer download datatype configures the type of file to downloaded to the switch. The types for download are: - Code - Configuration - Certificates - Signatures - customWebauth- custom webauth tar ball
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER code(2), config(3), webauthcert(4), webadmincert(5), signatures(6), customWebAuth(7), unknown(99)  

agentTransferDownloadStart 1.3.6.1.4.1.14179.1.2.9.2.6
Transfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentTransferDownloadStatus 1.3.6.1.4.1.14179.1.2.9.2.7
Indicates the current status of an download transfer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notInitiated(1), transferStarting(2), errorStarting(3), wrongFileType(4), updatingConfig(5), invalidConfigFile(6), writingToFlash(7), failureWritingToFlash(8), checkingCRC(9), failedCRC(10), unknownDirection(11), transferSuccessful(12), transferFailed(13), bootBreakOff(14), invalidTarFile(15), unknown(99)  

agentTransferDownloadTftpMaxRetries 1.3.6.1.4.1.14179.1.2.9.2.8
Maximum number of retries to be allowed for a TFTP message packet.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..254  

agentTransferDownloadTftpTimeout 1.3.6.1.4.1.14179.1.2.9.2.9
Timeout in seconds for a TFTP message packet.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..254  

agentDot3adAggPortTable 1.3.6.1.4.1.14179.1.2.11
This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDot3adAggPortEntry

agentDot3adAggPortEntry 1.3.6.1.4.1.14179.1.2.11.1
Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AgentDot3adAggPortEntry  

agentDot3adAggPort 1.3.6.1.4.1.14179.1.2.11.1.1
ifIndex of this physical port
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

agentDot3adAggPortLACPMode 1.3.6.1.4.1.14179.1.2.11.1.21
Enable/disable 802.3ad LACP on this port
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortConfigTable 1.3.6.1.4.1.14179.1.2.12
A table of the switch's physical port config entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentPortConfigEntry

agentPortConfigEntry 1.3.6.1.4.1.14179.1.2.12.1
Switch's physical port config entry
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentPortConfigEntry  

agentPortDot1dBasePort 1.3.6.1.4.1.14179.1.2.12.1.1
The port number of this port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

agentPortIfIndex 1.3.6.1.4.1.14179.1.2.12.1.2
The switch's Port IfIndex
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentPortIanaType 1.3.6.1.4.1.14179.1.2.12.1.3
The switch's Port Type
Status: current Access: read-only
OBJECT-TYPE    
  IANAifType  

agentPortSTPMode 1.3.6.1.4.1.14179.1.2.12.1.4
The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dot1d(1), fast(2), off(3)  

agentPortSTPState 1.3.6.1.4.1.14179.1.2.12.1.5
The switch's Port Spanning Tree Protocol State
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER blocking(1), listening(2), learning(3), forwarding(4), disabled(5)  

agentPortAdminMode 1.3.6.1.4.1.14179.1.2.12.1.6
The switch's Port Admin Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortPhysicalMode 1.3.6.1.4.1.14179.1.2.12.1.7
The switch's Port Speed Mode. This is the configured physical mode.This object is read-only for gigabit ports
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autoNegotiate(1), half10(2), full10(3), half100(4), full100(5), full1000sx(8)  

agentPortPhysicalStatus 1.3.6.1.4.1.14179.1.2.12.1.8
The switch's Port Physical Speed Status.This is the current actual speed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER autonegotiate(1), half10(2), full10(3), half100(4), full100(5), full1000sx(8), unknown(9)  

agentPortLinkTrapMode 1.3.6.1.4.1.14179.1.2.12.1.9
If enabled, link up and link down traps will be sent for this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortClearStats 1.3.6.1.4.1.14179.1.2.12.1.10
Clear stats for this port only
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortDefaultType 1.3.6.1.4.1.14179.1.2.12.1.11
This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively- configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
Status: current Access: read-write
OBJECT-TYPE    
  OBJECT IDENTIFIER  

agentPortType 1.3.6.1.4.1.14179.1.2.12.1.12
This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object qbEnetDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object qbEnetPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

agentPortAutoNegAdminStatus 1.3.6.1.4.1.14179.1.2.12.1.13
This object identifies the administration status of auto negotiation for this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortDot3FlowControlMode 1.3.6.1.4.1.14179.1.2.12.1.14
Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortPowerMode 1.3.6.1.4.1.14179.1.2.12.1.15
Enable/Disable the port's Power over ethernet. This doesn't apply to appliances that have no POE controller.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

agentPortGvrpStatus 1.3.6.1.4.1.14179.1.2.12.1.16
The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port.(Attribute no longer supported)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agentPortGarpJoinTime 1.3.6.1.4.1.14179.1.2.12.1.17
The GARP Join time, in centiseconds.(Attribute no longer supported)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentPortGarpLeaveTime 1.3.6.1.4.1.14179.1.2.12.1.18
The GARP Leave time, in centiseconds.(Attribute no longer supported)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentPortGarpLeaveAllTime 1.3.6.1.4.1.14179.1.2.12.1.19
The GARP LeaveAll time, in centiseconds.(Attribute no longer supported)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentPortMirrorMode 1.3.6.1.4.1.14179.1.2.12.1.20
The switch's Port Mirror Mode. If enabled, then this is the port that the packets are mirrored to.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentPortMulticastApplianceMode 1.3.6.1.4.1.14179.1.2.12.1.21
The Port Multicast Appliance Mode. If enabled, then this port allows multicast streams through it. At a time, a maximum of four ports including the gigabit ethernet port can have this mode enabled on them. This is to limit the number of multicast streams allowed through the switch at a given time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentPortOperationalStatus 1.3.6.1.4.1.14179.1.2.12.1.40
The current operational state of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

agentSaveConfig 1.3.6.1.4.1.14179.1.3.1
save config to NVRAM
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentClearConfig 1.3.6.1.4.1.14179.1.3.2
clear config to factory defaults
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentClearLags 1.3.6.1.4.1.14179.1.3.3
clear lag configuration
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentClearLoginSessions 1.3.6.1.4.1.14179.1.3.4
close all telnet sessions
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentClearPortStats 1.3.6.1.4.1.14179.1.3.6
clear all port statistics
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentClearSwitchStats 1.3.6.1.4.1.14179.1.3.7
clear all switch statistics
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentClearTrapLog 1.3.6.1.4.1.14179.1.3.8
clear trap log
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentResetSystem 1.3.6.1.4.1.14179.1.3.10
reset the switch
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portStatsTable 1.3.6.1.4.1.14179.1.4.1
A list of additional thernet statistics entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatsEntry

portStatsEntry 1.3.6.1.4.1.14179.1.4.1.1
A collection of statistics kept for a particular Ethernet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortStatsEntry  

portStatsIndex 1.3.6.1.4.1.14179.1.4.1.1.1
The value of this object uniquely identifies this portStatsEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

portStatsPktsTx64Octets 1.3.6.1.4.1.14179.1.4.1.1.2
The total number of packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsTx65to127Octets 1.3.6.1.4.1.14179.1.4.1.1.3
The total number of packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsTx128to255Octets 1.3.6.1.4.1.14179.1.4.1.1.4
The total number of packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsTx256to511Octets 1.3.6.1.4.1.14179.1.4.1.1.5
The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsTx512to1023Octets 1.3.6.1.4.1.14179.1.4.1.1.6
The total number of packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsTx1024to1518Octets 1.3.6.1.4.1.14179.1.4.1.1.7
The total number of packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsRx1519to1530Octets 1.3.6.1.4.1.14179.1.4.1.1.8
The total number of packets (including bad packets) received that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsTx1519to1530Octets 1.3.6.1.4.1.14179.1.4.1.1.9
The total number of packets (including bad packets) transmitted that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPktsTxOversizeOctets 1.3.6.1.4.1.14179.1.4.1.1.30
The total number of packets (including bad packets) transmitted that were more than 1530 octets in length. (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

multipleUsersTrap 1.3.6.1.4.1.14179.1.50.1
Multiple Users Log Trap.
Status: current Access: read-only
NOTIFICATION-TYPE    

broadcastStormStartTrap 1.3.6.1.4.1.14179.1.50.2
Broadcast Storm Start Log Trap.
Status: current Access: read-only
NOTIFICATION-TYPE    

broadcastStormEndTrap 1.3.6.1.4.1.14179.1.50.3
Broadcast Storm End Log Trap.
Status: current Access: read-only
NOTIFICATION-TYPE    

linkFailureTrap 1.3.6.1.4.1.14179.1.50.4
trapMgrLinkFailureLogTrap.
Status: current Access: read-only
NOTIFICATION-TYPE    

vlanRequestFailureTrap 1.3.6.1.4.1.14179.1.50.5
Vlan Request Failure Log Trap
Status: current Access: read-only
NOTIFICATION-TYPE    

vlanDeleteLastTrap 1.3.6.1.4.1.14179.1.50.6
Last Vlan Delete Log Trap
Status: current Access: read-only
NOTIFICATION-TYPE    

vlanDefaultCfgFailureTrap 1.3.6.1.4.1.14179.1.50.7
Default Vlan Config Failure Log Trap
Status: current Access: read-only
NOTIFICATION-TYPE    

vlanRestoreFailureTrap 1.3.6.1.4.1.14179.1.50.8
Vlan Restore Failure Log Trap
Status: current Access: read-only
NOTIFICATION-TYPE    

fanFailureTrap 1.3.6.1.4.1.14179.1.50.9
Fan Failure Log Trap.
Status: current Access: read-only
NOTIFICATION-TYPE    

stpInstanceNewRootTrap 1.3.6.1.4.1.14179.1.50.10
STP Instance New Root Trap
Status: current Access: read-only
NOTIFICATION-TYPE    

stpInstanceTopologyChangeTrap 1.3.6.1.4.1.14179.1.50.11
STP Instance Topology Change Trap
Status: current Access: read-only
NOTIFICATION-TYPE    

powerSupplyStatusChangeTrap 1.3.6.1.4.1.14179.1.50.12
Power Supply Status Change Trap
Status: current Access: read-only
NOTIFICATION-TYPE    

bsnSwitchingCompliance 1.3.6.1.4.1.14179.1.52.1
The compliance statement for the SNMP entities that implement the bsnSwitching module
Status: current Access: read-only
MODULE-COMPLIANCE    

bsnSwitchingAgentInfoGroup 1.3.6.1.4.1.14179.1.51.1
This collection of objects provide switching information.
Status: current Access: read-only
OBJECT-GROUP    

bsnSwitchingAgentConfigGroup 1.3.6.1.4.1.14179.1.51.2
This collection of objects provide switching configuration information.
Status: current Access: read-only
OBJECT-GROUP    

bsnSwitchingAgentSystemGroup 1.3.6.1.4.1.14179.1.51.3
This collection of objects provide switching system information and config.
Status: current Access: read-only
OBJECT-GROUP    

bsnSwitchingAgentStatsGroup 1.3.6.1.4.1.14179.1.51.4
This collection of objects provide switching statistics.
Status: current Access: read-only
OBJECT-GROUP    

bsnSwitchingObsGroup 1.3.6.1.4.1.14179.1.51.5
This collection of objects are obsoleted in bsnSwitching module.
Status: obsolete Access: read-only
OBJECT-GROUP    

bsnSwitchingTrap 1.3.6.1.4.1.14179.1.51.6
This collection of objects provides switching related notification.
Status: current Access: read-only
NOTIFICATION-GROUP