ADTX-RAID-AVCL-S2-MIB

File: ADTX-RAID-AVCL-S2-MIB.mib (27887 bytes)

Imported modules

RFC-1215 SNMPv2-SMI ADTX-SMI-S2
SNMPv2-TC

Imported symbols

TRAP-TYPE NOTIFICATION-TYPE OBJECT-IDENTITY
Integer32 Counter32 OBJECT-TYPE
MODULE-IDENTITY adtx avc
DisplayString

Defined Types

AvcString  
DisplayString    

AvcLongString  
OCTET STRING Size(0..10000)    

AvcCounter  
Counter32    

AvcInteger  
Integer32    

AvclDeviceInformationEntry  
SEQUENCE    
  avclDeviceIndex AvcCounter
  avclDeviceIP AvcString
  avclDeviceSystemVersion AvcString
  avclDeviceManufacturer AvcString
  avclDeviceProductName AvcString
  avclDeviceRevisionLevel AvcString
  avclDeviceSerialNumber AvcString
  avclDeviceDate AvcString
  avclDeviceTime AvcString
  avclDeviceAssignedSpare AvcString
  avclDeviceInitiatorMode AvcString
  avclDeviceInstantCopyLicense AvcString
  avclDeviceMirroringLicense AvcString
  avclDeviceWWNInfoCount AvcCounter
  avclDeviceWWNInfo AvcString
  avclDeviceSurfaceSchedMode AvcLongString
  avclDeviceSurfaceSchedTime AvcString
  avclDeviceSurfaceVerifyDuration AvcCounter
  avclDeviceICSourceLU AvcInteger
  avclDeviceICTargetLU AvcInteger
  avclDeviceICFlag AvcString
  avclDeviceICProgress AvcCounter
  avclDeviceICPairWWN AvcString
  avclDeviceRegHostCount AvcCounter
  avclDeviceRegHosts AvcLongString
  avclDeviceLuToMirrorCount AvcCounter
  avclDeviceLunsToMirror AvcLongString
  avclDeviceRaidGrpCount AvcCounter
  avclDeviceRaidGrpsState AvcLongString
  avclDeviceRaidGrpsDriveCount AvcLongString
  avclDeviceRaidGrpsSize AvcLongString
  avclDeviceRaidGrpsLuUnderSurfaceVerify AvcLongString
  avclDeviceRaidGrpsSurfaceVerifyProgress AvcLongString
  avclDeviceRaidGrpsInitReconProgress AvcLongString
  avclDeviceRaidGrpsFreeSpace AvcLongString
  avclDeviceSpareCount AvcCounter
  avclDeviceSparesState AvcLongString
  avclDeviceSparesRaidGrpNumber AvcLongString
  avclDeviceVolumeCount AvcCounter
  avclDeviceVolumesState AvcLongString
  avclDeviceVolumesRaidGrpNumber AvcLongString
  avclDeviceVolumesRaidLevel AvcLongString
  avclDeviceVolumesSize AvcLongString
  avclDeviceVolumesInitProgress AvcLongString
  avclDeviceVolumesNickname AvcLongString
  avclDeviceDriveCount AvcCounter
  avclDeviceDrivesState AvcLongString
  avclDeviceDrivesUsageType AvcLongString
  avclDeviceDrivesRaidGrpOrSpareNumber AvcLongString
  avclDeviceComponentCount AvcCounter
  avclDeviceComponentsType AvcLongString
  avclDeviceComponentsState AvcLongString
  avclDeviceComponentsInstanceNumber AvcLongString

Defined Values

avcl 1.3.6.1.4.1.2653.3.1.1
The MIB module for the ADTX Virtual Console for L Series.
MODULE-IDENTITY    

avclVersion 1.3.6.1.4.1.2653.3.1.1.1
The software version of AVC-L basing on the Daemon as the data gathered is based on it. eg. '4.0 (for AVC-L 4.0)'
OBJECT-TYPE    
  AvcString  

avclOS 1.3.6.1.4.1.2653.3.1.1.2
The Operating System of where the AVC-L Daemon resides. eg. 'Windows 2000 (Service Pack 3)'
OBJECT-TYPE    
  AvcString  

avclHost 1.3.6.1.4.1.2653.3.1.1.3
The IP address or hostname of the system where the AVC-L daemon resides. eg. '172.16.16.204'
OBJECT-TYPE    
  AvcString  

avclNumOfDevices 1.3.6.1.4.1.2653.3.1.1.4
The number of L devices that the AVC-L Daemon is currently connected. eg. 2
OBJECT-TYPE    
  AvcCounter  

avclEventInfo 1.3.6.1.4.1.2653.3.1.1.5
This object will show the most recently sent 'critical' event or trap. Events/Traps can be sent by the AVC-L Daemon if SNMP notification is enabled in the Daemon's configuration file. This file can be configured thru the AVC-L Client. Value can be one of the following phrases: 'xxx Serial Number: yyy ADTX ArrayMasStor IP zzz device not accessible.' - this means that the device is disconnected, accidental or otherwise, and needs to be reconnected. 'xxx Serial Number: yyy IP zzz Array nn: sss ==> Exposed.' 'xxx Serial Number: yyy IP zzz Array nn: sss ==> Invalidated Protected Space.' - where: nn - array number sss - any status other than either 'Exposed' or 'Invalidated Protected Space' This means that the array's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Array nn Lun mm: sss ==> Data Lost.' 'xxx Serial Number: yyy IP zzz Array nn Lun mm: sss ==> Exposed.' - where: nn - array number mm - lun number sss - any status other than either 'Data Lost' or 'Exposed' This means that the lun's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Failed.' 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Offline.' 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Missing.' 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Blank.' - where: ll - spare number sss - any status other than either 'Failed', 'Offline', 'Missing', or 'Blank' This means that the spare's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Failed.' 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Offline.' 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Missing.' 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Blank.' - where: kk - disk/hdd number sss - any status other than either 'Failed', 'Offline', 'Missing', or 'Blank' This means that the disk's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Component jj: sss ==> Broken.' 'xxx Serial Number: yyy IP zzz Component jj: sss ==> Not Available.' - where: jj - disk/hdd number sss - any status other than either 'Broken' or 'Not Available' This means that the component's status changed to fail. Contact support. 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: abnormally ended.' 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: terminated due to power off.' 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: source size greater than destination.' 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: actual source size is lesser than specified size.' - where: ii - source lun hh - target lun This means that the instant copy failed and the data on target lun may be corrupted. Contact support. where: xxx - 'avcdaemon' or 'AVC Monitor Daemon - WinNT' yyy - serial number of the device concerned, eg. 'S000023' zzz - the IP address of the device concerned, eg. '172.16.16.190' The above event values are only for the critical events. There are other events that are more for informational purposes only.
OBJECT-TYPE    
  AvcLongString  

avclDeviceInformationTable 1.3.6.1.4.1.2653.3.1.1.6
This group (table) provides information about the L devices that are currently connected to the AVC-L Daemon
OBJECT-TYPE    
  SEQUENCE OF  
    AvclDeviceInformationEntry

avclDeviceInformationEntry 1.3.6.1.4.1.2653.3.1.1.6.1
Tok_String
OBJECT-TYPE    
  AvclDeviceInformationEntry  

avclDeviceIndex 1.3.6.1.4.1.2653.3.1.1.6.1.1
The index number of the L Device pertaining to this table. eg. 1
OBJECT-TYPE    
  AvcCounter  

avclDeviceIP 1.3.6.1.4.1.2653.3.1.1.6.1.2
IP address of the specific L device queried eg. '172.16.16.190'
OBJECT-TYPE    
  AvcString  

avclDeviceSystemVersion 1.3.6.1.4.1.2653.3.1.1.6.1.3
The device's subsystem version. eg. '7.2'
OBJECT-TYPE    
  AvcString  

avclDeviceManufacturer 1.3.6.1.4.1.2653.3.1.1.6.1.4
The device's manufacturer name from the Inquiry command info eg. 'ADTX'
OBJECT-TYPE    
  AvcString  

avclDeviceProductName 1.3.6.1.4.1.2653.3.1.1.6.1.5
The device's product name from the Inquiry command info eg. 'AXRR-L'
OBJECT-TYPE    
  AvcString  

avclDeviceRevisionLevel 1.3.6.1.4.1.2653.3.1.1.6.1.6
The revision level of the device controller's microcode/firmware from the Inquiry command info. eg. 'L25X'
OBJECT-TYPE    
  AvcString  

avclDeviceSerialNumber 1.3.6.1.4.1.2653.3.1.1.6.1.7
The device's serial number from the Inquiry command info. eg. 'S000023'
OBJECT-TYPE    
  AvcString  

avclDeviceDate 1.3.6.1.4.1.2653.3.1.1.6.1.8
The controller's system date of the L device. eg. 'Mar 7, 2003'
OBJECT-TYPE    
  AvcString  

avclDeviceTime 1.3.6.1.4.1.2653.3.1.1.6.1.9
The controller's system time of the L device, in 24-hr format. eg. '14:35'
OBJECT-TYPE    
  AvcString  

avclDeviceAssignedSpare 1.3.6.1.4.1.2653.3.1.1.6.1.10
The device's global spare assignment. Can be any of the ff.: - No Assigned Spare - (numerical value in string) eg. 'No Assigned Spare'
OBJECT-TYPE    
  AvcString  

avclDeviceInitiatorMode 1.3.6.1.4.1.2653.3.1.1.6.1.11
Shows if the device is in Initiator mode or not. Can be any of the ff.: - Enabled - Disabled eg. 'Disabled'
OBJECT-TYPE    
  AvcString  

avclDeviceInstantCopyLicense 1.3.6.1.4.1.2653.3.1.1.6.1.12
Shows the license description for device Instant Copy. Can be any of the ff.: - Permanent Instant Copy - Temporary Instant Copy (# of days remaining) - No License eg. 'No License'
OBJECT-TYPE    
  AvcString  

avclDeviceMirroringLicense 1.3.6.1.4.1.2653.3.1.1.6.1.13
Shows the license description for device Mirroring. Can be any of the ff.: - Permanent Mirroring - Temporary Mirroring (# of days remaining) - No License eg. 'Permanent Mirroring'
OBJECT-TYPE    
  AvcString  

avclDeviceWWNInfoCount 1.3.6.1.4.1.2653.3.1.1.6.1.14
The count/number of WWN Information present in the device. eg. 1
OBJECT-TYPE    
  AvcCounter  

avclDeviceWWNInfo 1.3.6.1.4.1.2653.3.1.1.6.1.15
All WWN Information present in the device. First Controller WWN Information to be returned is that of Primary Controller, followed by Secondary Controller, and so on. F/O (Fail Over) Mode can be either 'Independent WWN' or 'Fail Over On Primary WWN' e.g. '50:03:07:A8:0A:00:01:13, F/O Mode: Independent WWN; 50:03:07:A8:0A:00:00:23, ....; ......'
OBJECT-TYPE    
  AvcString  

avclDeviceSurfaceSchedMode 1.3.6.1.4.1.2653.3.1.1.6.1.16
The mode for the scheduled surface check. Can be one of the ff: Type: - No Surface Verify - Sequential Verify - Parity Check - Parity Re-Generation Frequency: - null or the value is the zero-length string - Now - Once A Day - Once A Week - Once A Month - Always e.g. 'Type: No Surface Verify; Frequency: ' or 'Type: Sequential Verify; Frequency: Once A Day'
OBJECT-TYPE    
  AvcLongString  

avclDeviceSurfaceSchedTime 1.3.6.1.4.1.2653.3.1.1.6.1.17
The time for the scheduled surface check. Can be any of the ff. description: - null or the value is the zero-length string if there is no surface check or if always surface check. - the time of the day if 'Once A Day' - the day of the week and the time if 'Once A Week' - the day of the month and the time if 'Once A Month eg. '14:15' if Once A Day, 'Wednesday, 14:15' if Once A Week, or '24, 14:15' if Once A Month
OBJECT-TYPE    
  AvcString  

avclDeviceSurfaceVerifyDuration 1.3.6.1.4.1.2653.3.1.1.6.1.18
The duration of the scheduled surface check, in minutes. eg. 30
OBJECT-TYPE    
  AvcCounter  

avclDeviceICSourceLU 1.3.6.1.4.1.2653.3.1.1.6.1.19
The number of the source LU of the IC (Instant Copy) operation. eg. 1
OBJECT-TYPE    
  AvcInteger  

avclDeviceICTargetLU 1.3.6.1.4.1.2653.3.1.1.6.1.20
The number of the target LU of the Instant Copy operation. eg. 2
OBJECT-TYPE    
  AvcInteger  

avclDeviceICFlag 1.3.6.1.4.1.2653.3.1.1.6.1.21
This Instant Copy flag/status can be one of the ff.: - Stopped - Started - Copy to External Device - Copy From External Device - Instant Copy In Progress - Failed Due to Error - Cancelling Instant Copy
OBJECT-TYPE    
  AvcString  

avclDeviceICProgress 1.3.6.1.4.1.2653.3.1.1.6.1.22
This will contain the progress of the instant copy operation, in percent. eg. 99
OBJECT-TYPE    
  AvcCounter  

avclDeviceICPairWWN 1.3.6.1.4.1.2653.3.1.1.6.1.23
The worldwide node of the instant copy pair. eg. '50:03:07:A8:0A:00:01:13'
OBJECT-TYPE    
  AvcString  

avclDeviceRegHostCount 1.3.6.1.4.1.2653.3.1.1.6.1.24
The count of all registered hosts present in the device. eg. 2
OBJECT-TYPE    
  AvcCounter  

avclDeviceRegHosts 1.3.6.1.4.1.2653.3.1.1.6.1.25
Information of all registered hosts present in the device. Information includes: - Host x WWN, i.e. 50:03:07:A8:0A:00:01:13 - L Port Number: 0 (for Fibre Channel Port 0) and 1 (for Fibre Channel Port 1) - Host x LU Conversion, i.e. LU 1 can be seen as LU 5 by this host and LU 3 as LU1. Show only valid LU conversions out of the possible 32 conversions.. e.g. '50:03:07:A8:0A:00:01:13, 0, LU1->LU5, LU3->LU1; 50:03:07:A8:0A:00:00:23, 0, LU0->LU2, LU1->LU4, LU5->LU6, ; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceLuToMirrorCount 1.3.6.1.4.1.2653.3.1.1.6.1.26
The count of all LU's to mirror. eg. 3
OBJECT-TYPE    
  AvcCounter  

avclDeviceLunsToMirror 1.3.6.1.4.1.2653.3.1.1.6.1.27
Information of all Luns to mirror. Includes: - Source Lun - Target Lun - L Port Number: 0 (for FC port 0) or 1 (for FC port 1) - Target WWN e.g. 'LU1, LU3, 0, 50:03:07:A8:0A:00:01:13; LU2, LU4, 1, 50:03:07:A8:0A:00:00:23; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceRaidGrpCount 1.3.6.1.4.1.2653.3.1.1.6.1.28
The count of all RAID groups or arrays configured in any device. eg. 2
OBJECT-TYPE    
  AvcCounter  

avclDeviceRaidGrpsState 1.3.6.1.4.1.2653.3.1.1.6.1.29
Contains the state of each raid group present in the device. Can be one of the following: - Normal mode - Degraded mode - Reconstruction mode - Retry mode - System is starting up - System shutdown - System is not configured - System halt e.g. 'Array 1: Normal mode; Array 2: System halt; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceRaidGrpsDriveCount 1.3.6.1.4.1.2653.3.1.1.6.1.30
The number of drives included in each raid group. e.g. 'Array 1: 5; Array 2: 3; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceRaidGrpsSize 1.3.6.1.4.1.2653.3.1.1.6.1.31
Contains the size of each raid group. Size is in units of KB. e.g. 'Array 1: 645,620,224; Array 2: 300,000,000; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceRaidGrpsLuUnderSurfaceVerify 1.3.6.1.4.1.2653.3.1.1.6.1.32
Contains the volume or LU number of all raid groups that is currently undergoing surface verify. Display only the raid groups that are undergoing this feature. If no raid group is undergoing surface verify, this value is the zero-length string. e.g. 'Array 1: LU3; Array 3: LU11; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceRaidGrpsSurfaceVerifyProgress 1.3.6.1.4.1.2653.3.1.1.6.1.33
Contains the progress, in percentage, of all raid groups undergoing surface verify. Display only the raid groups that are undergoing this feature. If no raid group is undergoing surface verify, this value is the zero-length string. e.g. 'Array 1: 10; Array 3: 98; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceRaidGrpsInitReconProgress 1.3.6.1.4.1.2653.3.1.1.6.1.34
Contains the progress, in percentage, of the initialization or reconstruction for all raid groups undergoing such process. e.g. 'Array 1: 17; Array 3: 85; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceRaidGrpsFreeSpace 1.3.6.1.4.1.2653.3.1.1.6.1.35
Contains the total free space of all raid groups, in units of KB. e.g. 'Array 1: 5,000,000; Array 2: 0; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceSpareCount 1.3.6.1.4.1.2653.3.1.1.6.1.36
The count of all spare drives in any device. eg. 1
OBJECT-TYPE    
  AvcCounter  

avclDeviceSparesState 1.3.6.1.4.1.2653.3.1.1.6.1.37
Contains the state of each spare drive present in the device. Can be one of the following: - On Line - Off Line - Not Configured - Working Properly - Failed or Not Attached - Under Reconstruction - Under Retry - Installed - Not Installed - Starting Up - Standing By - Power Supplied to the Drive - No Power Supplied - Drive is Reserved - Drive is Not Reserved e.g. 'Spare 1: Under Reconstruction; Spare 2: On Line; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceSparesRaidGrpNumber 1.3.6.1.4.1.2653.3.1.1.6.1.38
Shows the raid group number to which the spare belongs. value is 'Global' if the spare is global or does not belong to any raid group. e.g. 'Spare 1: 3; Spare 2: Global; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceVolumeCount 1.3.6.1.4.1.2653.3.1.1.6.1.39
The count of all volumes present in any device. Maximum number of volumes configurable is 32. Volume/LU number starts at 0. eg. 4
OBJECT-TYPE    
  AvcCounter  

avclDeviceVolumesState 1.3.6.1.4.1.2653.3.1.1.6.1.40
Contains the state of volumes present in the device. Can be one of the following: - Initialization Completed - Required - Initialization In Progress - LUN Failed - LUN Not Configured - Format Required - Format In Progress e.g. 'LU 1: LUN Failed; LU 2: Format Required; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceVolumesRaidGrpNumber 1.3.6.1.4.1.2653.3.1.1.6.1.41
Shows the raid group number to which the volume belongs. e.g. 'LU 1: 2; LU 2: 2; LU 3: 1;......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceVolumesRaidLevel 1.3.6.1.4.1.2653.3.1.1.6.1.42
Shows the raid level the volume is configured. Can be any of the following: 0 - RAID 0 1 - RAID 1 5 - RAID 5 e.g. 'LU 1: 0; LU 2: 0; LU 3: 5;......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceVolumesSize 1.3.6.1.4.1.2653.3.1.1.6.1.43
Shows the size of all volumes in the device, in units of KB. e.g. 'LU 1: 1,500,000; LU 2: 7,000,000; LU 3: 15,000,000;......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceVolumesInitProgress 1.3.6.1.4.1.2653.3.1.1.6.1.44
Contains the progress, in percentage, of the initialization or reconstruction for all volumes undergoing such process. e.g. 'LU 1: 1; LU 2: 89; LU 3: 64;......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceVolumesNickname 1.3.6.1.4.1.2653.3.1.1.6.1.45
Contains the nickname or mount point of each volume in a device. If no nickname, the value is the zero-length string. e.g. 'LU 1: /mnt/device/sda; LU 2: ; LU 3: /mnt/device/sdc;......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceDriveCount 1.3.6.1.4.1.2653.3.1.1.6.1.46
The count of all drives present in any device. Maximum number of drives is 15, but can be 30 if there is an expansion. eg. 15
OBJECT-TYPE    
  AvcCounter  

avclDeviceDrivesState 1.3.6.1.4.1.2653.3.1.1.6.1.47
Contains the state of the drives present in the device. Can be one of the following: - On Line - Off Line - Spare - Not Configured - Working Properly - Failed or Not Attached - Under Reconstruction - Under Retry - Installed - Not Installed - Starting Up - Standing By - Power Supplied to the Drive - No Power Supplied - Drive is Reserved - Drive is Not Reserved e.g. 'Drive 1: Spare; LU 2: Starting UP; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceDrivesUsageType 1.3.6.1.4.1.2653.3.1.1.6.1.48
The usage type of the drive in the device. Can be one of the ff.: - In Array - Not Assigned - As Spare - HDD does not exist e.g. 'Drive 1: As Spare; Drive 2: Not Assigned; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceDrivesRaidGrpOrSpareNumber 1.3.6.1.4.1.2653.3.1.1.6.1.49
The raid group or spare number this drive belongs. If this is 'Not Assigned' or 'HDD does not exist', the value is the zero-length string. e.g. 'Drive 1: Spare 2; Drive 2: Array 1; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceComponentCount 1.3.6.1.4.1.2653.3.1.1.6.1.50
The count of all components present in any device. eg. 3
OBJECT-TYPE    
  AvcCounter  

avclDeviceComponentsType 1.3.6.1.4.1.2653.3.1.1.6.1.51
The usage type of the component in the device. Can be one of the ff.: - Power Supply - Fan e.g. 'Component 1: Power Supply; Component 2: Fan; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceComponentsState 1.3.6.1.4.1.2653.3.1.1.6.1.52
Contains the state of the components present in the device. Can be one of the following: - Normal - Fail - Not Available e.g. 'Component 1: Normal; Component 2: Fail; ......'
OBJECT-TYPE    
  AvcLongString  

avclDeviceComponentsInstanceNumber 1.3.6.1.4.1.2653.3.1.1.6.1.53
The index number of each unique component device type. Format of values are: PS1 - Power Supply 1 F2 - Fan 2 e.g. 'Component 1: PS1; Component 2: F2; ......'
OBJECT-TYPE    
  AvcLongString  

avclEvents 1.3.6.1.4.1.2653.3.1.1.0
The events for AVC-L as detected by the daemon.
OBJECT-IDENTITY    

daemonEvent 1.3.6.1.4.1.2653.3.1.1.0.1
This trap is sent if SNMP notification is enabled for any or all of the critical (needs troubleshooting) events described at 'avclEventInfo' above. There are other events but are categorized as status-changed events that don't need troubleshooting, just for informational purposes.
NOTIFICATION-TYPE