ADTRAN-DSUIQ-MIB

File: ADTRAN-DSUIQ-MIB.mib (56108 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215 ADTRAN-MIB

Imported symbols

enterprises Counter IpAddress
Gauge OBJECT-TYPE DisplayString
ifIndex TRAP-TYPE adProdPhysAddress
adProducts adMgmt

Defined Types

AdDSUIQPvcConfigEntry  
SEQUENCE    
  adDSUIQPvcConfigIndex INTEGER
  adDSUIQPvcDLCI INTEGER
  adDSUIQPvcCIR INTEGER
  adDSUIQPvcSequenceOption INTEGER
  adDSUIQPvcDelayPacketOption INTEGER
  adDSUIQPvcDBUDLCI INTEGER
  adDSUIQPvcStatsControl INTEGER

AdDSUIQIntDDSStatusEntry  
SEQUENCE    
  adDSUIQIntDDSSlotIndex INTEGER
  adDSUIQIntDDSUnavailableTime Counter
  adDSUIQIntDDSStateChange Counter
  adDSUIQIntDDSBPVFrameError Counter

AdDSUIQDayDDSStatusEntry  
SEQUENCE    
  adDSUIQDayDDSSlotIndex INTEGER
  adDSUIQDayDDSUnavailableTime Counter
  adDSUIQDayDDSStateChange Counter
  adDSUIQDayDDSBPVFrameError Counter

AdDSUIQDiagnosticEntry  
SEQUENCE    
  adDSUIQDiagnosticIndex INTEGER
  adDSUIQDiagnosticDlci INTEGER
  adDSUIQDiagnosticControl INTEGER
  adDSUIQDiagnosticDuration INTEGER
  adDSUIQDiagnosticStatus INTEGER
  adDSUIQDiagnosticSecondsRemaining INTEGER
  adDSUIQDiagnosticFramesTx Counter
  adDSUIQDiagnosticFramesRx Counter
  adDSUIQDiagnosticLostFrames Counter
  adDSUIQDiagnosticMaxDelay Gauge
  adDSUIQDiagnosticMinDelay Gauge
  adDSUIQDiagnosticAvgDelay Gauge

AdDSUIQIntDBUStatusEntry  
SEQUENCE    
  adDSUIQIntDBUSlotIndex INTEGER
  adDSUIQIntDBUFramesRx Counter
  adDSUIQIntDBUFramesTx Counter
  adDSUIQIntDBUBytesRx Counter
  adDSUIQIntDBUBytesTx Counter
  adDSUIQIntDBUAvgThruputTx Gauge
  adDSUIQIntDBUAvgThruputRx Gauge
  adDSUIQIntDBUMaxThruputTx Counter
  adDSUIQIntDBUMaxThruputRx Counter
  adDSUIQIntDBUAvgUtilizationTx Gauge
  adDSUIQIntDBUAvgUtilizationRx Gauge
  adDSUIQIntDBUMaxUtilizationTx Counter
  adDSUIQIntDBUMaxUtilizationRx Counter
  adDSUIQIntTimeInDBU Counter
  adDSUIQIntDBUCrcErrors Counter
  adDSUIQIntDBUAbortFrames Counter
  adDSUIQIntDBUOctectViolations Counter
  adDSUIQIntDBUDiscardFrames Counter
  adDSUIQIntDBULengthErrors Counter
  adDSUIQIntDBUEncapsulationErrors Counter
  adDSUIQIntDBUUnroutable Counter

AdDSUIQDayDBUStatusEntry  
SEQUENCE    
  adDSUIQDayDBUSlotIndex INTEGER
  adDSUIQDayDBUFramesRx Counter
  adDSUIQDayDBUFramesTx Counter
  adDSUIQDayDBUBytesRx Counter
  adDSUIQDayDBUBytesTx Counter
  adDSUIQDayDBUAvgThruputTx Gauge
  adDSUIQDayDBUAvgThruputRx Gauge
  adDSUIQDayDBUMaxThruputTx Counter
  adDSUIQDayDBUMaxThruputRx Counter
  adDSUIQDayDBUAvgUtilizationTx Gauge
  adDSUIQDayDBUAvgUtilizationRx Gauge
  adDSUIQDayDBUMaxUtilizationTx Counter
  adDSUIQDayDBUMaxUtilizationRx Counter
  adDSUIQDayTimeInDBU Counter
  adDSUIQDayDBUCrcErrors Counter
  adDSUIQDayDBUAbortFrames Counter
  adDSUIQDayDBUOctectViolations Counter
  adDSUIQDayDBUDiscardFrames Counter
  adDSUIQDayDBULengthErrors Counter
  adDSUIQDayDBUEncapsulationErrors Counter
  adDSUIQDayDBUUnroutable Counter

AdDSUIQTrapManagerEntry  
SEQUENCE    
  adDSUIQTrapManagerRouteIndex INTEGER
  adDSUIQTrapManagerRouteIPAddress IpAddress
  adDSUIQTrapManagerRouteDLCI INTEGER
  adDSUIQTrapManagerRoutePort INTEGER

Defined Values

adDSUIQ 1.3.6.1.4.1.664.1.141
OBJECT IDENTIFIER    

adDSUIQmg 1.3.6.1.4.1.664.2.141
OBJECT IDENTIFIER    

adDSUIQSystemConfig 1.3.6.1.4.1.664.2.141.1
OBJECT IDENTIFIER    

adDSUIQNetPortConfig 1.3.6.1.4.1.664.2.141.2
OBJECT IDENTIFIER    

adDSUIQDtePortConfig 1.3.6.1.4.1.664.2.141.3
OBJECT IDENTIFIER    

adDSUIQPvcConfig 1.3.6.1.4.1.664.2.141.4
OBJECT IDENTIFIER    

adDSUIQCurrentStatus 1.3.6.1.4.1.664.2.141.5
OBJECT IDENTIFIER    

adDSUIQIntDDSStatus 1.3.6.1.4.1.664.2.141.6
OBJECT IDENTIFIER    

adDSUIQDayDDSStatus 1.3.6.1.4.1.664.2.141.7
OBJECT IDENTIFIER    

adDSUIQDiagnostic 1.3.6.1.4.1.664.2.141.8
OBJECT IDENTIFIER    

adDSUIQDBUConfig 1.3.6.1.4.1.664.2.141.9
OBJECT IDENTIFIER    

adDSUIQIntDBUStatus 1.3.6.1.4.1.664.2.141.10
OBJECT IDENTIFIER    

adDSUIQDayDBUStatus 1.3.6.1.4.1.664.2.141.11
OBJECT IDENTIFIER    

adDSUIQTrapManager 1.3.6.1.4.1.664.2.141.12
OBJECT IDENTIFIER    

adDSUIQPassword 1.3.6.1.4.1.664.2.141.1.1
Sets the Telnet and Vt100 Terminal Control Password (10 characters maximum).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQTOD 1.3.6.1.4.1.664.2.141.1.2
Sets the Time of Day with the format hh:mm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQDate 1.3.6.1.4.1.664.2.141.1.3
Sets the Date with format MM-DD-YY.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQIpAddress 1.3.6.1.4.1.664.2.141.1.4
Sets the unit's IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

adDSUIQIpAddressMask 1.3.6.1.4.1.664.2.141.1.5
Sets the unit's Subnet Mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

adDSUIQGatewayIpAddress 1.3.6.1.4.1.664.2.141.1.6
Sets the Network's Gateway IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

adDSUIQTrapManagerIpAddress 1.3.6.1.4.1.664.2.141.1.7
Sets the IP Address of the Trap Host Manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

adDSUIQTrapManagerDLCI 1.3.6.1.4.1.664.2.141.1.8
Sets the DLCI of the Trap Host Manager. (Range 16 - 1007).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQTrapManagerPort 1.3.6.1.4.1.664.2.141.1.9
Selects the Trap Manager Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dtePort(2), networkPort(3), controlPort(4), ethernetPort(5)  

adDSUIQControPortBaud 1.3.6.1.4.1.664.2.141.1.10
Selects the Control Port baud rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps9600(1), bps19200(2), bps38400(3)  

adDSUIQControPortMode 1.3.6.1.4.1.664.2.141.1.11
Selects the Control Port protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER terminal(1), slip(2), ppp(3)  

adDSUIQEnableTraps 1.3.6.1.4.1.664.2.141.1.12
Overall trap enable/disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adDSUIQAlarmState 1.3.6.1.4.1.664.2.141.1.13
This bit map variable indicates alarm conditions which are currently set. When an alarm condition occurs, the corresponding event bit is set in this variable. If armed, setting the event will generate an Alarm Trap. The various alarm event bit positions are: 1 = Network physical link up. 2 = Network physical link down. 4 = Network signal state up. 8 = Network signal state down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

adDSUIQArmAlarm 1.3.6.1.4.1.664.2.141.1.14
This bit map variable arms or disarms an individual or group of events identified in adFradAlarmState as a source for generation of an Alarm Trap. The various arm event bit positions are : 1 = Network physical link up. 2 = Network physical link down. 4 = Network signal state up. 8 = Network signal state down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

adDSUIQAbortConfig 1.3.6.1.4.1.664.2.141.1.15
A Set will cancel the current selections and revert to the last Saved configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER abortConfig(1)  

adDSUIQSaveConfig 1.3.6.1.4.1.664.2.141.1.16
A Set operation will reset the unit and save current selections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER saveConfig(1)  

adDSUIQNetPortLoopRate 1.3.6.1.4.1.664.2.141.2.1
Selects the Rate for the DDS interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps56000(1), bps64000(2), auto(3)  

adDSUIQNetPortClockSource 1.3.6.1.4.1.664.2.141.2.2
Selects the Timing source for the DDS interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER master(1), fromNetwork(2)  

adDSUIQNetPortSignaling 1.3.6.1.4.1.664.2.141.2.3
Signaling type for the frame relay management interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), conLMI(2), ansiT1617D(3), ituTQ933A(4), auto(5)  

adDSUIQNetPortt391 1.3.6.1.4.1.664.2.141.2.4
Sets the polling interval in seconds for the frame relay management interface. (Range 5 - 30).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

adDSUIQNetPortn391 1.3.6.1.4.1.664.2.141.2.5
Sets the interval between full status polls for the frame relay management interface. (Range 1 - 255).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

adDSUIQNetPortn392 1.3.6.1.4.1.664.2.141.2.6
Sets the error count for the frame relay management interface. (Range 1 - 10).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

adDSUIQNetPortn393 1.3.6.1.4.1.664.2.141.2.7
Sets the error window (number of polling events)for the frame relay management interface. (Range 1 - 10).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

adDSUIQNetPortMgmtDlci1Mode 1.3.6.1.4.1.664.2.141.2.8
Sets the mode for the managent DLCI 1. If set for shared, management DLCI 1 is used for customer data and IQ management data. If set for dedicated, management DLCI 1 is used only for IQ management data and is not passed to the attached frame relay DTE device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER shared(1), dedicated(2)  

adDSUIQNetPortMgmtDlci2Mode 1.3.6.1.4.1.664.2.141.2.9
Sets the mode for the managent DLCI 2. If set for shared, management DLCI 2 is used for customer data and IQ management data. If set for dedicated, management DLCI 2 is used only for IQ management data and is not passed to the attached frame relay DTE device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER shared(1), dedicated(2)  

adDSUIQNetMgmtDlci1 1.3.6.1.4.1.664.2.141.2.10
Sets the DLCI for management PVC 1. (Range 16 - 1007).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQNetMgmtDlci2 1.3.6.1.4.1.664.2.141.2.11
Sets the DLCI for management PVC 2. (Range 16 - 1007).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQNetPortMaxPVCs 1.3.6.1.4.1.664.2.141.2.12
Sets the maxium PVCs supported by the IQ unit. (Range 1 - 100).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

adDSUIQNetPortHistIntervals 1.3.6.1.4.1.664.2.141.2.13
Sets the number of history intervals for storage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDSUIQNetPortHistIntervalsAvailable 1.3.6.1.4.1.664.2.141.2.14
Returns the number of history intervals allowed based on the maxium number of PVCs selected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQDtePortInterface 1.3.6.1.4.1.664.2.141.3.1
Selects the DTE Port Interface type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rs232(1), v35(2)  

adDSUIQDtePortRate 1.3.6.1.4.1.664.2.141.3.2
Selects the DTE Port Rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps56000(1), bps64000(2)  

adDSUIQDteCTSOption 1.3.6.1.4.1.664.2.141.3.3
Selects the Clear to Send (CTS) option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forcedOn(1), followRTS(2)  

adDSUIQDteCDOption 1.3.6.1.4.1.664.2.141.3.4
Selects the Carrier Detect (CD) option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forcedOn(1), normal(2)  

adDSUIQDteDSROption 1.3.6.1.4.1.664.2.141.3.5
Selects the Data Set Ready (DSR) option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forcedOn(1), normal(2)  

adDSUIQDtePortMgmtDLCI 1.3.6.1.4.1.664.2.141.3.6
Sets the DTE Port Management DLCI. (Range 16 - 1007).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQDtePortt392 1.3.6.1.4.1.664.2.141.3.7
Sets the timeout in seconds between polling intervals. (Range 5 - 30).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

adDSUIQDtePortn392 1.3.6.1.4.1.664.2.141.3.8
Sets the number of error events for the frame relay management. (Range 1 - 10).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

adDSUIQDtePortn393 1.3.6.1.4.1.664.2.141.3.9
Sets the error window (polling events) for the frame relay management (Range 1 - 10).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

adDSUIQDteManagementPvcOption 1.3.6.1.4.1.664.2.141.3.10
Controls the presence of the DTE management PVC in a full status response to the DTE device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

adDSUIQDteSignalingResponsesOption 1.3.6.1.4.1.664.2.141.3.11
Determines how the IQ device will respond to polls from the DTE device during a network failure. If set to always on, the IQ will respond to polls during a network failure. If set to follow network, the IQ will not respond thus emulating a failure to the DTE device. If the IQ is responsible for dial backup, this option should be set to always on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER alwaysOn(1), followsNetwork(2)  

adDSUIQDteFlowControlOption 1.3.6.1.4.1.664.2.141.3.12
Determines how the IQ device will respond to congestion during DBU operation. If set for none, the IQ will drop frames during DBU operation when severe congestion occurs. If set for hardware, the IQ will vary the DTE TC clock in order to control the amount of data offered to the IQ when severe congestion occurs. FECN/BECN mode will set the FECN bit in outbound frames and set BECN bit for inbound frames leaving flow control up to the DTE devices.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), hardware(2), fECNBECN(3)  

adDSUIQPvcConfigTable 1.3.6.1.4.1.664.2.141.4.1
n/a.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDSUIQPvcConfigEntry

adDSUIQPvcConfigEntry 1.3.6.1.4.1.664.2.141.4.1.1
n/a
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDSUIQPvcConfigEntry  

adDSUIQPvcConfigIndex 1.3.6.1.4.1.664.2.141.4.1.1.1
n/a.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQPvcDLCI 1.3.6.1.4.1.664.2.141.4.1.1.2
Address for this PVC entry. (Range 16 - 1007).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQPvcCIR 1.3.6.1.4.1.664.2.141.4.1.1.3
Commited Information Rate for this PVC in Kbps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1536  

adDSUIQPvcSequenceOption 1.3.6.1.4.1.664.2.141.4.1.1.4
Sequence number allows the IQ to detect lost frames across the frame relay service. This option should be disabled for PVCs that do not have IQ on both ends.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adDSUIQPvcDelayPacketOption 1.3.6.1.4.1.664.2.141.4.1.1.5
Delay packet option for this PVC allows the IQ to sample round trip delay across the frame relay service. This option should be disabled for PVCs that do not have IQ on both ends.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adDSUIQPvcDBUDLCI 1.3.6.1.4.1.664.2.141.4.1.1.6
Used when this PVC entry is used for dial backup. This value should contain the PVC address as seen on the far end of the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQPvcStatsControl 1.3.6.1.4.1.664.2.141.4.1.1.7
Stats Control option determines how the IQ will track statistics for this PVC entry. Auto will allow the IQ to track statistics for a PVC if enough memory is available.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), enabled(2), disabled(3)  

adDSUIQDDSState 1.3.6.1.4.1.664.2.141.5.1
Current status of the DDS interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal56K(1), normal64K(2), openLoop(3), outOfService-Frame(4), noFrameSync(5), dSUInTest(6), scanning(7), noRXSignal(8), checkTelcoCable(9)  

adDSUIQDteControlLeads 1.3.6.1.4.1.664.2.141.5.2
This bit map integer reflects the current state of the DTE control leads as follows: bit meaning 0 CTS 1 RTS 2 DSR 3 DTR 4 DCD A 1 means the lead is on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

adDSUIQDBUPortType 1.3.6.1.4.1.664.2.141.5.3
Returns the DBU card type installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), v34modem(2), dce(3), sw564wire(4), sw562wire(5), isdn(6)  

adDSUIQLANPortStatus 1.3.6.1.4.1.664.2.141.5.4
Returns the LAN card type installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), ethernet(2)  

adDSUIQLEDstatus 1.3.6.1.4.1.664.2.141.5.5
This bit map integer reflects DSUIQ front panel LED state as follows: bit meaning 0 TEST 1 ALARM 2 DCD 3 RD 4 TD 5 CTS 6 RTS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

adDSUIQDTESignalingState 1.3.6.1.4.1.664.2.141.5.6
Current state of the PVC signaling between the DSUIQ and the attached frame relay dte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

adDSUIQNETSignalingState 1.3.6.1.4.1.664.2.141.5.7
Current state of the PVC signaling between the DSUIQ and the frame relay service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

adDSUIQNETPVCCount 1.3.6.1.4.1.664.2.141.5.8
Current count of network pvcs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQNETPVCConfigTableSize 1.3.6.1.4.1.664.2.141.5.9
Current count of rows in the PVC config table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQDBUState 1.3.6.1.4.1.664.2.141.5.10
Current state of the DBU interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER emptySlot(1), openLoop(2), gettingTEI(3), tEIOK(4), sPIDOK(5), idle(6), inDBU(7), waitingForCall(8), noSealingCurrent(9), outOfService(10), noRXSignal(11), ringing(12), dialing(13), dialingNumber1(14), dialingNumber2(15), dialingNumber3(16), dialingNumber4(17), dialingNumber5(18), anserwingCall(19), noDialTone(20), noAnswer(21), busy(22), waitingToDial(23), connect(24), connect33d6(25), connect31d2(26), connect115d2R(27), connect115d2(28), connect28d8(29), connect26d4(30), connect24d0(31), connect21d6(32), connect57d6R(33), connect38d4R(34), connect19d2R(35), connect9d6R(36), connect4d8R(37), connect2d4R(38), connect16d8(39), connect14d4(40), connect12d0(41), connect7d2(42), connect57d6(43), connect38d4(44), connect19d2(45), connect9d6(46), connect4d8(47), connect2d4(48), sendingPasscode(49), waitingPasscode(50), invalidPasscode(51), validPasscode(52), error(53)  

adDSUIQIntDDSStatusTable 1.3.6.1.4.1.664.2.141.6.1
n/a.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDSUIQIntDDSStatusEntry

adDSUIQIntDDSStatusEntry 1.3.6.1.4.1.664.2.141.6.1.1
n/a
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDSUIQIntDDSStatusEntry  

adDSUIQIntDDSSlotIndex 1.3.6.1.4.1.664.2.141.6.1.1.1
n/a.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQIntDDSUnavailableTime 1.3.6.1.4.1.664.2.141.6.1.1.2
Amount of time in seconds the DDS port is unavailable due to test or in an inactive state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDDSStateChange 1.3.6.1.4.1.664.2.141.6.1.1.3
Number of changes in the DDS port state. This includes all normal, inactive, and test state transitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDDSBPVFrameError 1.3.6.1.4.1.664.2.141.6.1.1.4
Number of BPVs received when the DDS is set for 56K mode or the number of DDS framing errors when the DDS is set for 64K mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDDSStatusTable 1.3.6.1.4.1.664.2.141.7.1
n/a.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDSUIQDayDDSStatusEntry

adDSUIQDayDDSStatusEntry 1.3.6.1.4.1.664.2.141.7.1.1
n/a
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDSUIQDayDDSStatusEntry  

adDSUIQDayDDSSlotIndex 1.3.6.1.4.1.664.2.141.7.1.1.1
n/a.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQDayDDSUnavailableTime 1.3.6.1.4.1.664.2.141.7.1.1.2
Amount of time in seconds the DDS port is unavailable due to test or in an inactive state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDDSStateChange 1.3.6.1.4.1.664.2.141.7.1.1.3
Number of changes in the DDS port state. This includes all normal, inactive, and test state transitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDDSBPVFrameError 1.3.6.1.4.1.664.2.141.7.1.1.4
Number of BPVs received when the DDS is set for 56K mode or the number of DDS framing errors when the DDS is set for 64K mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDiagnosticTable 1.3.6.1.4.1.664.2.141.8.1
n/a.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDSUIQDiagnosticEntry

adDSUIQDiagnosticEntry 1.3.6.1.4.1.664.2.141.8.1.1
n/a
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDSUIQDiagnosticEntry  

adDSUIQDiagnosticIndex 1.3.6.1.4.1.664.2.141.8.1.1.1
n/a.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQDiagnosticDlci 1.3.6.1.4.1.664.2.141.8.1.1.2
Sets the DLCI for PVC Loopback. (Range 16 - 1007).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQDiagnosticControl 1.3.6.1.4.1.664.2.141.8.1.1.3
Starts or Stops PVC Loopback Test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER control(1)  

adDSUIQDiagnosticDuration 1.3.6.1.4.1.664.2.141.8.1.1.4
Sets the Length of the PVC Loopback in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDSUIQDiagnosticStatus 1.3.6.1.4.1.664.2.141.8.1.1.5
PVC Loopback Test Status. (Active/Inactive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER diagnosticOff(1), diagnosticOn(2)  

adDSUIQDiagnosticSecondsRemaining 1.3.6.1.4.1.664.2.141.8.1.1.6
PVC Loopback Test time remaining in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQDiagnosticFramesTx 1.3.6.1.4.1.664.2.141.8.1.1.7
Diagnostic Frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDiagnosticFramesRx 1.3.6.1.4.1.664.2.141.8.1.1.8
Diagnostic Frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDiagnosticLostFrames 1.3.6.1.4.1.664.2.141.8.1.1.9
Diagnostic Frames Lost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDiagnosticMaxDelay 1.3.6.1.4.1.664.2.141.8.1.1.10
Diagnostic Maximum Delay measurement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQDiagnosticMinDelay 1.3.6.1.4.1.664.2.141.8.1.1.11
Diagnostic Minimum Delay measurement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQDiagnosticAvgDelay 1.3.6.1.4.1.664.2.141.8.1.1.12
Diagnostic Average Delay measurement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQDBUOption 1.3.6.1.4.1.664.2.141.9.1
This option specifies whether the unit automatically enters dial backup mode or waits for manual setup.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQDBUStartLockout 1.3.6.1.4.1.664.2.141.9.2
This option selects the hour to begin disabling dial backup operation when daily or weekend lockout mode is active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

adDSUIQDBUEndLockout 1.3.6.1.4.1.664.2.141.9.3
This option selects the hour to end dial backup lockout when daily or weekend lockout mode is active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

adDSUIQDBUMode 1.3.6.1.4.1.664.2.141.9.4
This option specifies the dial backup operating mode for the unit as orginate or answer. One end must be set to originate and the other end to answer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER answer(1), originate(2)  

adDSUIQDBUOOS 1.3.6.1.4.1.664.2.141.9.5
This option enables the unit to enter backup mode if an out-of-service condition is detected from the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQDBUNoRx 1.3.6.1.4.1.664.2.141.9.6
This option enables the unit to enter backup mode when a loss of receive signal is detected from the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQDBUNoSealCurr 1.3.6.1.4.1.664.2.141.9.7
This option enables the unit to enter backup mode when a loss of sealing current is detected from the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQDBUNoLMI 1.3.6.1.4.1.664.2.141.9.8
This option enables the unit to enter backup mode when network PVC signaling state goes down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQAutoRestoreTimer 1.3.6.1.4.1.664.2.141.9.9
This option selects the amount of time that the DSUIQ circuit must be active before the unit switches from backup to normal mode of operation. The timer value is in minutes from 0 to 60. A zero value disables automatic restore, DSUIQ operation must be restored manually.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

adDSUIQRedialCount 1.3.6.1.4.1.664.2.141.9.10
This option allows the selection of the number of times the unit will redial the Far End unit when attempting to go to backup and a busy or reorder condition occurs. Redial count can be set for a maximum of 60.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

adDSUIQDBUFailTimeout 1.3.6.1.4.1.664.2.141.9.11
This option allows the selection of the amount of time that the dedicated circuit failure condition is active before attempting to enter dial backup mode. The Fail Timeout value is in increments of 10 seconds up to a maximum of 600 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

adDSUIQDBURedialTimer 1.3.6.1.4.1.664.2.141.9.12
This option works in conjunction with the Redial Counter option. The Redial Timer specifies the amount of time between redial attempts. The Redial Timer value is seconds, up to a maximum of 60 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

adDSUIQDBUPassCheck 1.3.6.1.4.1.664.2.141.9.13
This option allows the unit to send and verify a dial backup passcode for an additional level of security. When enabled, the originate unit sends the passcode and the answer unit checks the passcode before the backup connection is considered valid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQDBUPassCode 1.3.6.1.4.1.664.2.141.9.14
This option sets the dial backup passcode used to provide an additional level of security. A passcode of one to ten digit characters can be set. If enabled, the originate unit sends the passcode and the answer unit checks the passcode to verify the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQWeekendLockout 1.3.6.1.4.1.664.2.141.9.15
This option enables or disables Weekend Lockout for Dial Backup operation. If enabled, no backup will occur from midnight Friday to midnight Sunday.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQDailyLockout 1.3.6.1.4.1.664.2.141.9.16
This option enables or disables Daily Lockout for Dial Backup operation. If enabled, no backup will occur between Lockout Start hour and Lockout End hour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQAnswerAlways 1.3.6.1.4.1.664.2.141.9.17
This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQBeeperOption 1.3.6.1.4.1.664.2.141.9.18
This option enables or disables the audible alarm when the IQ unit goes into dial backup mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adDSUIQDBUPhoneNumber1 1.3.6.1.4.1.664.2.141.9.19
This option is used to set a phone number to place a DBU call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQDBUPhoneNumber2 1.3.6.1.4.1.664.2.141.9.20
This option is used to set a phone number to place a DBU call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQDBUPhoneNumber3 1.3.6.1.4.1.664.2.141.9.21
This option is used to set a phone number to place a DBU call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQDBUPhoneNumber4 1.3.6.1.4.1.664.2.141.9.22
This option is used to set a phone number to place a DBU call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQDBUPhoneNumber5 1.3.6.1.4.1.664.2.141.9.23
This option is used to set a phone number to place a DBU call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQDBUISDNSwitch 1.3.6.1.4.1.664.2.141.9.24
This option is used to select the ISDN switch type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER att-5ess(1), nt-dms-100(2), national-isdn1(3)  

adDSUIQDBUISDNBChannelRate 1.3.6.1.4.1.664.2.141.9.25
This option is used to select the ISDN channel rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps56000(1), bps64000(2)  

adDSUIQDBUISDNSPID 1.3.6.1.4.1.664.2.141.9.26
This option is used to set the SPID for the ISDN interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQDBUISDNLDN 1.3.6.1.4.1.664.2.141.9.27
This option is used to set LDN for the ISDN interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDSUIQV34LineType 1.3.6.1.4.1.664.2.141.9.28
This option selects the type of analog phone line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tone(1), pulse(2)  

adDSUIQDCEInterfaceType 1.3.6.1.4.1.664.2.141.9.29
This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rs232(1), v35(2)  

adDSUIQDCEBitRate 1.3.6.1.4.1.664.2.141.9.30
This option is uses for utilization measurement of the DBU port when an external DCE device is used. Set this parameter in KBPS close to the connection rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1536  

adDSUIQIntDBUStatusTable 1.3.6.1.4.1.664.2.141.10.1
n/a.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDSUIQIntDBUStatusEntry

adDSUIQIntDBUStatusEntry 1.3.6.1.4.1.664.2.141.10.1.1
n/a
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDSUIQIntDBUStatusEntry  

adDSUIQIntDBUSlotIndex 1.3.6.1.4.1.664.2.141.10.1.1.1
n/a.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQIntDBUFramesRx 1.3.6.1.4.1.664.2.141.10.1.1.2
The number of Frames the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUFramesTx 1.3.6.1.4.1.664.2.141.10.1.1.3
The number of Frames the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUBytesRx 1.3.6.1.4.1.664.2.141.10.1.1.4
The number of Bytes the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUBytesTx 1.3.6.1.4.1.664.2.141.10.1.1.5
The number of Bytes the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUAvgThruputTx 1.3.6.1.4.1.664.2.141.10.1.1.6
The Average Throughput the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQIntDBUAvgThruputRx 1.3.6.1.4.1.664.2.141.10.1.1.7
The Average Throughput the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQIntDBUMaxThruputTx 1.3.6.1.4.1.664.2.141.10.1.1.8
The Maximum Throughput the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUMaxThruputRx 1.3.6.1.4.1.664.2.141.10.1.1.9
The Maximum Throughput the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUAvgUtilizationTx 1.3.6.1.4.1.664.2.141.10.1.1.10
The Average Utilization the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQIntDBUAvgUtilizationRx 1.3.6.1.4.1.664.2.141.10.1.1.11
The Average Utilization the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQIntDBUMaxUtilizationTx 1.3.6.1.4.1.664.2.141.10.1.1.12
The Maximum Utilization the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUMaxUtilizationRx 1.3.6.1.4.1.664.2.141.10.1.1.13
The Maximum Utilization the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntTimeInDBU 1.3.6.1.4.1.664.2.141.10.1.1.14
Time in seconds the DBU port was active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUCrcErrors 1.3.6.1.4.1.664.2.141.10.1.1.15
Number of frames received with CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUAbortFrames 1.3.6.1.4.1.664.2.141.10.1.1.16
Number of frames received without proper flag termination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUOctectViolations 1.3.6.1.4.1.664.2.141.10.1.1.17
Number of frames received with a bit count not divisible by eigth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUDiscardFrames 1.3.6.1.4.1.664.2.141.10.1.1.18
Number of frames discarded by the IQ unit
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBULengthErrors 1.3.6.1.4.1.664.2.141.10.1.1.19
Number of frames received that is less than 5 bytes or greater than 4500 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUEncapsulationErrors 1.3.6.1.4.1.664.2.141.10.1.1.20
Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQIntDBUUnroutable 1.3.6.1.4.1.664.2.141.10.1.1.21
Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUStatusTable 1.3.6.1.4.1.664.2.141.11.1
n/a.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDSUIQDayDBUStatusEntry

adDSUIQDayDBUStatusEntry 1.3.6.1.4.1.664.2.141.11.1.1
n/a
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDSUIQDayDBUStatusEntry  

adDSUIQDayDBUSlotIndex 1.3.6.1.4.1.664.2.141.11.1.1.1
n/a.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQDayDBUFramesRx 1.3.6.1.4.1.664.2.141.11.1.1.2
The number of Frames the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUFramesTx 1.3.6.1.4.1.664.2.141.11.1.1.3
The number of Frames the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUBytesRx 1.3.6.1.4.1.664.2.141.11.1.1.4
The number of Bytes the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUBytesTx 1.3.6.1.4.1.664.2.141.11.1.1.5
The number of Bytes the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUAvgThruputTx 1.3.6.1.4.1.664.2.141.11.1.1.6
The Average Throughput the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQDayDBUAvgThruputRx 1.3.6.1.4.1.664.2.141.11.1.1.7
The Average Throughput the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQDayDBUMaxThruputTx 1.3.6.1.4.1.664.2.141.11.1.1.8
The Maximum Throughput the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUMaxThruputRx 1.3.6.1.4.1.664.2.141.11.1.1.9
The Maximum Throughput the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUAvgUtilizationTx 1.3.6.1.4.1.664.2.141.11.1.1.10
The Average Utilization the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQDayDBUAvgUtilizationRx 1.3.6.1.4.1.664.2.141.11.1.1.11
The Average Utilization the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDSUIQDayDBUMaxUtilizationTx 1.3.6.1.4.1.664.2.141.11.1.1.12
The Maximum Utilization the Port transmitted for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUMaxUtilizationRx 1.3.6.1.4.1.664.2.141.11.1.1.13
The Maximum Utilization the Port received for the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayTimeInDBU 1.3.6.1.4.1.664.2.141.11.1.1.14
Time in seconds the DBU port was active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUCrcErrors 1.3.6.1.4.1.664.2.141.11.1.1.15
Number of frames received with CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUAbortFrames 1.3.6.1.4.1.664.2.141.11.1.1.16
Number of frames received without proper flag termination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUOctectViolations 1.3.6.1.4.1.664.2.141.11.1.1.17
Number of frames received with a bit count not divisible by eigth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUDiscardFrames 1.3.6.1.4.1.664.2.141.11.1.1.18
Number of frames discarded by the IQ unit
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBULengthErrors 1.3.6.1.4.1.664.2.141.11.1.1.19
Number of frames received that is less than 5 bytes or greater than 4500 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUEncapsulationErrors 1.3.6.1.4.1.664.2.141.11.1.1.20
Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQDayDBUUnroutable 1.3.6.1.4.1.664.2.141.11.1.1.21
Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

adDSUIQTrapManagerTable 1.3.6.1.4.1.664.2.141.12.1
The trap manger route table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDSUIQTrapManagerEntry

adDSUIQTrapManagerEntry 1.3.6.1.4.1.664.2.141.12.1.1
n/a
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDSUIQTrapManagerEntry  

adDSUIQTrapManagerRouteIndex 1.3.6.1.4.1.664.2.141.12.1.1.1
n/a.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDSUIQTrapManagerRouteIPAddress 1.3.6.1.4.1.664.2.141.12.1.1.2
Sets the Trap Manager IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

adDSUIQTrapManagerRouteDLCI 1.3.6.1.4.1.664.2.141.12.1.1.3
Sets the Trap Manager DLCI. (Range 16 - 1007).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007  

adDSUIQTrapManagerRoutePort 1.3.6.1.4.1.664.2.141.12.1.1.4
Selects the Trap Manager Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dtePort(2), networkPort(3), controlPort(4), ethernetPort(5)  

adDSUIQNetworkPhysUp 14101
This trap indicates that the physical layer of the network is now up.
TRAP-TYPE    

adDSUIQNetworkPhysDown 14102
This trap indicates that the physical layer of the network is now down.
TRAP-TYPE    

adDSUIQNetworkLMIUp 14103
This trap indicates that the LMI state of the network is now up.
TRAP-TYPE    

adDSUIQNetworkLMIDown 14104
This trap indicates that the LMI state of the network is now down.
TRAP-TYPE    

adDSUIQColdStart 14105
This trap indicates that a cold start has occurred.
TRAP-TYPE