ACD-DESC-MIB

File: ACD-DESC-MIB.mib (15047 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMPv2-MIB ACCEDIAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Unsigned32 Gauge32
DisplayString TruthValue MacAddress
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
sysName acdProducts

Defined Types

AcdDescConnectorEntry  
SEQUENCE    
  acdDescConnectorID Unsigned32
  acdDescConnectorName DisplayString
  acdDescConnectorType INTEGER
  acdDescConnectorPoESupport TruthValue

AcdDescPwrEntry  
SEQUENCE    
  acdDescPwrID Unsigned32
  acdDescPwrName DisplayString
  acdDescPwrType INTEGER
  acdDescPwrPresent TruthValue

AcdDescTsEntry  
SEQUENCE    
  acdDescTsID Unsigned32
  acdDescTsCurrentTemp Integer32
  acdDescTsFirstThres Integer32
  acdDescTsFisrtThresPass TruthValue
  acdDescTsSecondThres Integer32
  acdDescTsSecondThresPass TruthValue

Defined Values

acdDesc 1.3.6.1.4.1.22420.1.1
The Accedian Networks device Description MIB.
MODULE-IDENTITY    

acdDescNotifications 1.3.6.1.4.1.22420.1.1.0
OBJECT IDENTIFIER    

acdDescMIBObjects 1.3.6.1.4.1.22420.1.1.15
OBJECT IDENTIFIER    

acdDescConformance 1.3.6.1.4.1.22420.1.1.15.1
OBJECT IDENTIFIER    

acdDescCommercialName 1.3.6.1.4.1.22420.1.1.1
This string is to describe the type of device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acdDescMacBaseAddr 1.3.6.1.4.1.22420.1.1.2
This is the Base of the EtherNID MAC addresses.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

acdDescIdentifier 1.3.6.1.4.1.22420.1.1.3
Identifies the EtherNID on your network.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acdDescFirmwareVersion 1.3.6.1.4.1.22420.1.1.4
Indicates the version of the firmware currently loaded.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acdDescHardwareVersion 1.3.6.1.4.1.22420.1.1.5
Indicates the assembly ID of the hardware.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acdDescSerialNumber 1.3.6.1.4.1.22420.1.1.6
Indicates the serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acdDescCpuUsageCurrent 1.3.6.1.4.1.22420.1.1.20
Indicates the current percentage of CPU usage.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

acdDescCpuUsageAverage15 1.3.6.1.4.1.22420.1.1.21
Indicates the average percentage of CPU usage over the last 15 seconds. This object range from (0..100).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

acdDescCpuUsageAverage30 1.3.6.1.4.1.22420.1.1.22
Indicates the average percentage of CPU usage over the last 30 seconds. This object range from (0..100).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

acdDescCpuUsageAverage60 1.3.6.1.4.1.22420.1.1.23
Indicates the average percentage of CPU usage over the last 60 seconds. This object range from (0..100).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

acdDescCpuUsageAverage900 1.3.6.1.4.1.22420.1.1.24
Indicates the average percentage of CPU usage over the last 900 seconds. This object range from (0..100).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

acdDescConnectorTable 1.3.6.1.4.1.22420.1.1.10
Table of all connectors info
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdDescConnectorEntry

acdDescConnectorEntry 1.3.6.1.4.1.22420.1.1.10.1
This is the product connector definition.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdDescConnectorEntry  

acdDescConnectorID 1.3.6.1.4.1.22420.1.1.10.1.1
Unique value for each connector. Starting to one from left to right.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

acdDescConnectorName 1.3.6.1.4.1.22420.1.1.10.1.2
Identifies the connector on the silkscreen.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acdDescConnectorType 1.3.6.1.4.1.22420.1.1.10.1.3
Describe the connector type, for instance an RJ-45 or an SFP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), rj45(2), rj45S(3), db9(4), bnc(5), fAUI(6), mAUI(7), fiberSC(8), fiberMIC(9), fiberST(10), telco(11), mtrj(12), hssdc(13), fiberLC(14)  

acdDescConnectorPoESupport 1.3.6.1.4.1.22420.1.1.10.1.4
This is to indicate if the port support PoE or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdDescPwrTable 1.3.6.1.4.1.22420.1.1.11
Table of all Power Supplies
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdDescPwrEntry

acdDescPwrEntry 1.3.6.1.4.1.22420.1.1.11.1
This is the product available power supplies information.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdDescPwrEntry  

acdDescPwrID 1.3.6.1.4.1.22420.1.1.11.1.1
Unique value for each power supply.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

acdDescPwrName 1.3.6.1.4.1.22420.1.1.11.1.2
Identifies the power supply.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acdDescPwrType 1.3.6.1.4.1.22420.1.1.11.1.3
Describe the Power Supply type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pwrplus5volts(1), pwrminus48volts(2)  

acdDescPwrPresent 1.3.6.1.4.1.22420.1.1.11.1.4
This is to indicate if the power supply is present or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdDescTsTable 1.3.6.1.4.1.22420.1.1.12
Table of all Teperature Sensors.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdDescTsEntry

acdDescTsEntry 1.3.6.1.4.1.22420.1.1.12.1
This is the product available Temperature sensor information.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdDescTsEntry  

acdDescTsID 1.3.6.1.4.1.22420.1.1.12.1.1
Unique value for each Temperature Sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

acdDescTsCurrentTemp 1.3.6.1.4.1.22420.1.1.12.1.2
Current temperature in Celsius around the temperature sensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdDescTsFirstThres 1.3.6.1.4.1.22420.1.1.12.1.3
Temperature value in Celsius to declare this threshold crossed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdDescTsFisrtThresPass 1.3.6.1.4.1.22420.1.1.12.1.4
This is to indicate if the temperature cross the first threshold.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdDescTsSecondThres 1.3.6.1.4.1.22420.1.1.12.1.5
Temperature value in Celsius to declare this second threshold crossed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdDescTsSecondThresPass 1.3.6.1.4.1.22420.1.1.12.1.6
This is to indicate if the temperature cross the second threshold.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPowerLost 1.3.6.1.4.1.22420.1.1.0.1
The SNMP trap that is generated by a unit when it detect a power lost. It's the equivalent of the 802.3ah dying gasp.
Status: current Access: read-only
NOTIFICATION-TYPE    

acdDescCompliances 1.3.6.1.4.1.22420.1.1.15.1.1
OBJECT IDENTIFIER    

acdDescGroups 1.3.6.1.4.1.22420.1.1.15.1.2
OBJECT IDENTIFIER    

acdDescGenGroup 1.3.6.1.4.1.22420.1.1.15.1.2.1
.
Status: current Access: read-only
OBJECT-GROUP    

acdDescConnectorGroup 1.3.6.1.4.1.22420.1.1.15.1.2.2
.
Status: current Access: read-only
OBJECT-GROUP    

acdDescPwrGroup 1.3.6.1.4.1.22420.1.1.15.1.2.3
.
Status: current Access: read-only
OBJECT-GROUP    

acdDescTsGroup 1.3.6.1.4.1.22420.1.1.15.1.2.4
.
Status: current Access: read-only
OBJECT-GROUP    

acdDescNotificationsGroup 1.3.6.1.4.1.22420.1.1.15.1.2.5
Objects for the Notifications group.
Status: current Access: read-only
NOTIFICATION-GROUP    

acdAlarmCompliance 1.3.6.1.4.1.22420.1.1.15.1.1.1
The compliance statement for support of the ACD-DESC-MIB module.
Status: current Access: read-only
MODULE-COMPLIANCE