ACC-PSTN

File: ACC-PSTN.mib (73407 bytes)

Imported modules

RFC1155-SMI RFC-1215 RFC1213-MIB
ACC-SYSTEM ACC-MIB

Imported symbols

OBJECT-TYPE IpAddress TimeTicks
Gauge Counter TRAP-TYPE
ifIndex accTrapLogSeqNum accBRG
DisplayString

Defined Types

AccPstnSubTabEntry  
SEQUENCE    
  oPstnSubTabDslIndex INTEGER
  oPstnSubTabSigSystem INTEGER
  oPstnSubTabNumChannels INTEGER
  oPstnSubTabAdminStatus INTEGER
  oPstnSubTabOperStatus INTEGER
  oPstnSubTabMsgLevel INTEGER
  oPstnSubTabLastCause INTEGER
  oPstnSubTabNumberGroup INTEGER

AccPstnStatEntry  
SEQUENCE    
  oPstnStatDslIndex INTEGER
  oPstnStatCallsOriginated Counter
  oPstnStatCallsOfferred Counter
  oPstnStatCallsRouted Counter
  oPstnStatCallsAccepted Counter
  oPstnStatCallsCompleted Counter
  oPstnStatCallsCleared Counter

AccPstnCallTableEntry  
SEQUENCE    
  oPstnCallTabDslIndex INTEGER
  oPstnCallTabCallId INTEGER
  oPstnCallTabOrigin INTEGER
  oPstnCallTabChannel INTEGER
  oPstnCallTabEndpoint INTEGER
  oPstnCallTabState INTEGER
  oPstnCallTabCause INTEGER
  oPstnCallTabAddress INTEGER
  oPstnCallTabInfoRate INTEGER
  oPstnCallTabInfoType INTEGER
  oPstnCallTabDuration INTEGER

AccPstnChanTableEntry  
SEQUENCE    
  oPstnChanTabDslIndex INTEGER
  oPstnChanTabChannel INTEGER
  oPstnChanTabServState INTEGER
  oPstnChanTabChanState INTEGER
  oPstnChanTabSlotMap INTEGER

AccPstnRBSParamTableEntry  
SEQUENCE    
  oPstnRbsTabDslIndex INTEGER
  oPstnRbsTabSuprModeIn INTEGER
  oPstnRbsTabSuprModeOut INTEGER
  oPstnRbsTabRegnModeIn INTEGER
  oPstnRbsTabRegnModeOut INTEGER
  oPstnRbsTabPresModeIn INTEGER
  oPstnRbsTabPresModeOut INTEGER
  oPstnRbsTabGlareAction INTEGER
  oPstnRbsTabWoddDuration INTEGER
  oPstnRbsTabWsddDetect INTEGER
  oPstnRbsTabWesdDetect INTEGER
  oPstnRbsTabEnblocDigits INTEGER
  oPstnRbsTabEnblocTimeout INTEGER

AccPstnIntCasSupvParamEntry  
SEQUENCE    
  oPstnCasTabDslIndex INTEGER
  oPstnCasTabSupvModeIn INTEGER
  oPstnCasTabSupvModeOut INTEGER
  oPstnCasTabSupvMask INTEGER
  oPstnCasTabSupvIdlePatt INTEGER
  oPstnCasTabSupvIdleTime INTEGER
  oPstnCasTabSupvSeizePatt INTEGER
  oPstnCasTabSupvSeizeTime INTEGER
  oPstnCasTabSupvSeizeAckPatt INTEGER
  oPstnCasTabSupvSeizeAckTime INTEGER
  oPstnCasTabSupvAnswerPatt INTEGER
  oPstnCasTabSupvAnswerTime INTEGER
  oPstnCasTabSupvClrForwPatt INTEGER
  oPstnCasTabSupvClrForwTime INTEGER
  oPstnCasTabSupvClrBackPatt INTEGER
  oPstnCasTabSupvClrBackTime INTEGER
  oPstnCasTabSupvBlockPatt INTEGER
  oPstnCasTabSupvBlockTime INTEGER
  oPstnCasTabSupvMetPatt INTEGER
  oPstnCasTabSupvMetTime INTEGER
  oPstnCasTabSupvMetDelay INTEGER
  oPstnCasTabSupvMetOn INTEGER
  oPstnCasTabSupvMetOff INTEGER
  oPstnCasTabSupvGlare INTEGER
  oPstnCasTabRegModeIn INTEGER
  oPstnCasTabRegModeOut INTEGER
  oPstnCasTabRegComp1Tone INTEGER
  oPstnCasTabRegComp1On INTEGER
  oPstnCasTabRegComp1Off INTEGER
  oPstnCasTabRegComp2Tone INTEGER
  oPstnCasTabRegComp2On INTEGER
  oPstnCasTabRegComp2Off INTEGER

Defined Values

accPstn 1.3.6.1.4.1.5.1.1.69
OBJECT IDENTIFIER    

accPstnSubTable 1.3.6.1.4.1.5.1.1.69.1
Table of PSTN subscriber entry parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnSubTabEntry

accPstnSubTabEntry 1.3.6.1.4.1.5.1.1.69.1.1
PSTN subscriber entry-table parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccPstnSubTabEntry  

oPstnSubTabDslIndex 1.3.6.1.4.1.5.1.1.69.1.1.1
PSTN Subscriber Table Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnSubTabSigSystem 1.3.6.1.4.1.5.1.1.69.1.1.2
PSTN signaling system. Either RBS, P7 or R2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rbs(1), p7(2), r2(3)  

oPstnSubTabNumChannels 1.3.6.1.4.1.5.1.1.69.1.1.3
PSTN subscriber table - number of channels.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnSubTabAdminStatus 1.3.6.1.4.1.5.1.1.69.1.1.4
Administration status of PSTN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), drained(3)  

oPstnSubTabOperStatus 1.3.6.1.4.1.5.1.1.69.1.1.5
Operational status of PSTN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER offline(1), regpend(2), unrpend(3), cfgpend(4), starting(5), stopping(6), online(7)  

oPstnSubTabMsgLevel 1.3.6.1.4.1.5.1.1.69.1.1.6
PSTN Message level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnSubTabLastCause 1.3.6.1.4.1.5.1.1.69.1.1.7
PSTN subscriber table - last cause.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(0), unassigned-number(1), no-route-to-transit-network(2), no-route-to-destination(3), channel-unacceptable(6), call-awarded-being-delivered(7), normal-call-clearing(16), user-busy(17), no-user-responding(18), user-alerted-no-answer(19), call-rejected(21), number-changed(22), non-selected-user-clearing(26), destination-out-of-order(27), invalid-number-format(28), facility-rejected(29), response-to-status-enquiry(30), normal-clearing-unspecified(31), no-circuit-or-channel-available(34), network-out-of-order(38), temporary-failure(41), network-congestion(42), access-information-discarded(43), requested-channel-not-available(44), ciruit-or-channel-preempted(45), resources-unavailable(47), quality-of-service-unavailable(49), facility-not-subscribed(50), outgoing-call-barred(52), incoming-call-barred(54), bearer-capability-not-authorized(57), bearer-capability-not-available(58), service-not-available(63), bearer-capability-not-implemented(65), channel-not-implemented(66), facility-not-implemented(69), restricted-digital-information-only(70), service-not-implemented(79), invalid-call-reference(81), channel-does-not-exist(82), call-identity-non-existent(83), call-identity-in-use(84), no-call-suspended(85), suspended-call-cleared(86), incompatible-destination(88), invalid-transit-network(91), invalid-message-unspecified(95), manditory-information-element-missing(96), message-nonexistent-or-not-implemented(97), incompatible-or-nonexistent-message(98), information-element-not-implemented(99), invalid-information-element-contents(100), message-incompatible-with-call-state(101), timer-expiration(102), information-element-length-error(103), protocol-error-unspecified(111), interworking-unspecified(127)  

oPstnSubTabNumberGroup 1.3.6.1.4.1.5.1.1.69.1.1.8
PSTN Subscriber table - number group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnStatTable 1.3.6.1.4.1.5.1.1.69.2
A table containing PSTN statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnStatEntry

accPstnStatEntry 1.3.6.1.4.1.5.1.1.69.2.1
Management information PSTN statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccPstnStatEntry  

oPstnStatDslIndex 1.3.6.1.4.1.5.1.1.69.2.1.1
PSTN Statistics Dsl Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnStatCallsOriginated 1.3.6.1.4.1.5.1.1.69.2.1.2
PSTN Statistics - Calls Originated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

oPstnStatCallsOfferred 1.3.6.1.4.1.5.1.1.69.2.1.3
PSTN Statistics - Calls Offered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

oPstnStatCallsRouted 1.3.6.1.4.1.5.1.1.69.2.1.4
PSTN Statistics - Calls Routed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

oPstnStatCallsAccepted 1.3.6.1.4.1.5.1.1.69.2.1.5
PSTN Statistics - Calls Accepted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

oPstnStatCallsCompleted 1.3.6.1.4.1.5.1.1.69.2.1.6
PSTN Statistics - Calls Completed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

oPstnStatCallsCleared 1.3.6.1.4.1.5.1.1.69.2.1.7
PSTN Statistics - Calls Cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accPstnCallTable 1.3.6.1.4.1.5.1.1.69.3
A list of PSTN call entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnCallTableEntry

accPstnCallTableEntry 1.3.6.1.4.1.5.1.1.69.3.1
A table entry providing information about a specific call.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccPstnCallTableEntry  

oPstnCallTabDslIndex 1.3.6.1.4.1.5.1.1.69.3.1.1
PSTN Call Table Dsl Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnCallTabCallId 1.3.6.1.4.1.5.1.1.69.3.1.2
PSTN Call Table Call ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnCallTabOrigin 1.3.6.1.4.1.5.1.1.69.3.1.3
PSTN Call Table Origin.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), incoming(2), outgoing(3)  

oPstnCallTabChannel 1.3.6.1.4.1.5.1.1.69.3.1.4
PSTN Call Table Channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnCallTabEndpoint 1.3.6.1.4.1.5.1.1.69.3.1.5
PSTN Call Table Endpoint.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnCallTabState 1.3.6.1.4.1.5.1.1.69.3.1.6
PSTN Call Table State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), offered(2), initiated(3), sending(4), proceeding(5), connected(6), releasing(7), clearing(8), routing(9), ringing(10), delivered(11), answered(12), receiving(13), busy(14)  

oPstnCallTabCause 1.3.6.1.4.1.5.1.1.69.3.1.7
PSTN Call Table State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(0), unassigned-number(1), no-route-to-transit-network(2), no-route-to-destination(3), channel-unacceptable(6), call-awarded-being-delivered(7), normal-call-clearing(16), user-busy(17), no-user-responding(18), user-alerted-no-answer(19), call-rejected(21), number-changed(22), non-selected-user-clearing(26), destination-out-of-order(27), invalid-number-format(28), facility-rejected(29), response-to-status-enquiry(30), normal-clearing-unspecified(31), no-circuit-or-channel-available(34), network-out-of-order(38), temporary-failure(41), network-congestion(42), access-information-discarded(43), requested-channel-not-available(44), ciruit-or-channel-preempted(45), resources-unavailable(47), quality-of-service-unavailable(49), facility-not-subscribed(50), outgoing-call-barred(52), incoming-call-barred(54), bearer-capability-not-authorized(57), bearer-capability-not-available(58), service-not-available(63), bearer-capability-not-implemented(65), channel-not-implemented(66), facility-not-implemented(69), restricted-digital-information-only(70), service-not-implemented(79), invalid-call-reference(81), channel-does-not-exist(82), call-identity-non-existent(83), call-identity-in-use(84), no-call-suspended(85), suspended-call-cleared(86), incompatible-destination(88), invalid-transit-network(91), invalid-message-unspecified(95), manditory-information-element-missing(96), message-nonexistent-or-not-implemented(97), incompatible-or-nonexistent-message(98), information-element-not-implemented(99), invalid-information-element-contents(100), message-incompatible-with-call-state(101), timer-expiration(102), information-element-length-error(103), protocol-error-unspecified(111), interworking-unspecified(127)  

oPstnCallTabAddress 1.3.6.1.4.1.5.1.1.69.3.1.8
PSTN Call Table Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnCallTabInfoRate 1.3.6.1.4.1.5.1.1.69.3.1.9
PSTN Call Table Info Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnCallTabInfoType 1.3.6.1.4.1.5.1.1.69.3.1.10
PSTN Call Table Info Type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cmd(1), cm56(2), cmv(3), cma(4), voice(5), data(6), data56(7), audio(8), udi(9), rdi(10)  

oPstnCallTabDuration 1.3.6.1.4.1.5.1.1.69.3.1.11
PSTN Call Table Duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accPstnChanTable 1.3.6.1.4.1.5.1.1.69.4
Table of PSTN channel parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnChanTableEntry

accPstnChanTableEntry 1.3.6.1.4.1.5.1.1.69.4.1
Entry of PSTN channel parameter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccPstnChanTableEntry  

oPstnChanTabDslIndex 1.3.6.1.4.1.5.1.1.69.4.1.1
PSTN Channel Table Dsl Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnChanTabChannel 1.3.6.1.4.1.5.1.1.69.4.1.2
PSTN Channel Table Channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnChanTabServState 1.3.6.1.4.1.5.1.1.69.4.1.3
PSTN Channel Table Service State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in-service(1), maintenance(2), out-service(3)  

oPstnChanTabChanState 1.3.6.1.4.1.5.1.1.69.4.1.4
PSTN Channel Table Channel State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), proposed(2), awarded(3), busy(4), restart(5), cnfgpend(6), cnfgerr(7), reserved(8)  

oPstnChanTabSlotMap 1.3.6.1.4.1.5.1.1.69.4.1.5
PSTN Channel Table Slot Map.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accPstnRBSParamTable 1.3.6.1.4.1.5.1.1.69.5
A table containing RBS parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnRBSParamTableEntry

accPstnRBSParamTableEntry 1.3.6.1.4.1.5.1.1.69.5.1
An RBS parameter-table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccPstnRBSParamTableEntry  

oPstnRbsTabDslIndex 1.3.6.1.4.1.5.1.1.69.5.1.1
PSTN RBS Table Dsl Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabSuprModeIn 1.3.6.1.4.1.5.1.1.69.5.1.2
PSTN RBS Line Supervision Mode - Incoming.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), immediate(2), wink(3), ddsd(4)  

oPstnRbsTabSuprModeOut 1.3.6.1.4.1.5.1.1.69.5.1.3
PSTN RBS Line Supervision Mode - Outgoing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), immediate(2), wink(3), ddsd(4)  

oPstnRbsTabRegnModeIn 1.3.6.1.4.1.5.1.1.69.5.1.4
PSTN RBS Table Register Signaling Mode - Incoming.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER suppress(1), pulse(2), mf(3), dtmf(4)  

oPstnRbsTabRegnModeOut 1.3.6.1.4.1.5.1.1.69.5.1.5
PSTN RBS Table Register Signaling Mode - Outgoing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER suppress(1), pulse(2), mf(3), dtmf(4)  

oPstnRbsTabPresModeIn 1.3.6.1.4.1.5.1.1.69.5.1.6
PSTN RBS Table Pres Mode - Incoming.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), enbloc(2), overlap(3)  

oPstnRbsTabPresModeOut 1.3.6.1.4.1.5.1.1.69.5.1.7
PSTN RBS Table Pres Mode - outgoing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), enbloc(2), overlap(3)  

oPstnRbsTabGlareAction 1.3.6.1.4.1.5.1.1.69.5.1.8
PSTN RBS Table Glare Action.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

oPstnRbsTabWoddDuration 1.3.6.1.4.1.5.1.1.69.5.1.9
PSTN RBS Table Wodd Duration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabWsddDetect 1.3.6.1.4.1.5.1.1.69.5.1.10
PSTN RBS Table Wsdd Detect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabWesdDetect 1.3.6.1.4.1.5.1.1.69.5.1.11
PSTN RBS Table Wesd Detect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabEnblocDigits 1.3.6.1.4.1.5.1.1.69.5.1.12
PSTN RBS Table Enbloc Digits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabEnblocTimeout 1.3.6.1.4.1.5.1.1.69.5.1.13
PSTN RBS Table Enbloc Timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnIntCasSupvParamTable 1.3.6.1.4.1.5.1.1.69.6
Table of PSTN line supervision parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnIntCasSupvParamEntry

accPstnIntCasSupvParamEntry 1.3.6.1.4.1.5.1.1.69.6.1
PSTN line supervision parameter-table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccPstnIntCasSupvParamEntry  

oPstnCasTabDslIndex 1.3.6.1.4.1.5.1.1.69.6.1.1
PSTN CAS Table Dsl Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvModeIn 1.3.6.1.4.1.5.1.1.69.6.1.2
PSTN CAS Table Line Supervision Mode - Incoming.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), r2(2), p7(3)  

oPstnCasTabSupvModeOut 1.3.6.1.4.1.5.1.1.69.6.1.3
PSTN CAS Table Line Supervision Mode - Outgoing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), r2(2), p7(3)  

oPstnCasTabSupvMask 1.3.6.1.4.1.5.1.1.69.6.1.4
PSTN CAS Table Line Supervision Mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvIdlePatt 1.3.6.1.4.1.5.1.1.69.6.1.5
PSTN CAS Table Line Supervision Idle Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvIdleTime 1.3.6.1.4.1.5.1.1.69.6.1.6
PSTN CAS Table Line Supervision Idle Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvSeizePatt 1.3.6.1.4.1.5.1.1.69.6.1.7
PSTN CAS Table Line Supervision Seize Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvSeizeTime 1.3.6.1.4.1.5.1.1.69.6.1.8
PSTN CAS Table Line Supervision Seize Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvSeizeAckPatt 1.3.6.1.4.1.5.1.1.69.6.1.9
PSTN CAS Table Line Supervision Seize Ack Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvSeizeAckTime 1.3.6.1.4.1.5.1.1.69.6.1.10
PSTN CAS Table Line Supervision Seize Ack Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvAnswerPatt 1.3.6.1.4.1.5.1.1.69.6.1.11
PSTN CAS Table Line Supervision Answer Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvAnswerTime 1.3.6.1.4.1.5.1.1.69.6.1.12
PSTN CAS Table Line Supervision Answer Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvClrForwPatt 1.3.6.1.4.1.5.1.1.69.6.1.13
PSTN CAS Table Line Supervision Clear Forward Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvClrForwTime 1.3.6.1.4.1.5.1.1.69.6.1.14
PSTN CAS Table Line Supervision Clear Forward Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvClrBackPatt 1.3.6.1.4.1.5.1.1.69.6.1.15
PSTN CAS Table Line Supervision Clear Back Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvClrBackTime 1.3.6.1.4.1.5.1.1.69.6.1.16
PSTN CAS Table Line Supervision Clear Back Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvBlockPatt 1.3.6.1.4.1.5.1.1.69.6.1.17
PSTN CAS Table Line Supervision Block Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvBlockTime 1.3.6.1.4.1.5.1.1.69.6.1.18
PSTN CAS Table Line Supervision Block Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetPatt 1.3.6.1.4.1.5.1.1.69.6.1.19
PSTN CAS Table Line Supervision Metering Pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16), disabled(17)  

oPstnCasTabSupvMetTime 1.3.6.1.4.1.5.1.1.69.6.1.20
PSTN CAS Table Line Supervision Metering Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetDelay 1.3.6.1.4.1.5.1.1.69.6.1.21
PSTN CAS Table Line Supervision Metering Delay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetOn 1.3.6.1.4.1.5.1.1.69.6.1.22
PSTN CAS Table Line Supervision Metering On.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetOff 1.3.6.1.4.1.5.1.1.69.6.1.23
PSTN CAS Table Line Supervision Metering Off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvGlare 1.3.6.1.4.1.5.1.1.69.6.1.24
PSTN CAS Table Line Supervision Glare Behavior.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

oPstnCasTabRegModeIn 1.3.6.1.4.1.5.1.1.69.6.1.25
PSTN CAS Table Register Signaling Mode - Incoming.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER suppressed(1), r2-mf-x(2), p7-dtmf(3)  

oPstnCasTabRegModeOut 1.3.6.1.4.1.5.1.1.69.6.1.26
PSTN CAS Table Register Signaling Mode - Outgoing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER suppressed(1), r2-mf-x(2), p7-dtmf(3)  

oPstnCasTabRegComp1Tone 1.3.6.1.4.1.5.1.1.69.6.1.27
PSTN CAS Table Register Signaling Completion One Tone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER d1(1), d2(2), d3(3), d4(4), d5(5), d6(6), d7(7), d8(8), d9(9), d10(10), d11(11), d12(12), d13(13), d14(14), d15(15), none(16)  

oPstnCasTabRegComp1On 1.3.6.1.4.1.5.1.1.69.6.1.28
PSTN CAS Table Register Signaling Completion One Tone On Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabRegComp1Off 1.3.6.1.4.1.5.1.1.69.6.1.29
PSTN CAS Table Register Signaling Completion One Tone Off Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabRegComp2Tone 1.3.6.1.4.1.5.1.1.69.6.1.30
PSTN CAS Table Register Signaling Completion Two Tone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER d1(1), d2(2), d3(3), d4(4), d5(5), d6(6), d7(7), d8(8), d9(9), d10(10), d11(11), d12(12), d13(13), d14(14), d15(15), none(16)  

oPstnCasTabRegComp2On 1.3.6.1.4.1.5.1.1.69.6.1.31
PSTN CAS Table Register Signaling Completion Two Tone On Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

oPstnCasTabRegComp2Off 1.3.6.1.4.1.5.1.1.69.6.1.32
PSTN CAS Table Register Signaling Completion Two Tone Off Time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accDsprmTraps 1.3.6.1.4.1.5.1.1.69.7
OBJECT IDENTIFIER    

accDsprmTrapMsg 1.3.6.1.4.1.5.1.1.69.7.1
Trap message object for level-1 traps of DSPRM module
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

accNewLiberty 1.3.6.1.4.1.5.1.1.69.8
OBJECT IDENTIFIER    

accPstnTabSigGen 1.3.6.1.4.1.5.1.1.69.8.3
OBJECT IDENTIFIER    

accPstnEtt 1.3.6.1.4.1.5.1.1.69.8.3.3
OBJECT IDENTIFIER    

accPstnTabSigTrace 1.3.6.1.4.1.5.1.1.69.8.3.1
Depth of the trace level displayed in the trap log.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigType 1.3.6.1.4.1.5.1.1.69.8.3.2
OBJECT IDENTIFIER    

accPstnTabSigInType 1.3.6.1.4.1.5.1.1.69.8.3.2.1
Inbound signaling type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dtmf(2), dp(3), r2(4)  

accPstnTabSigOutType 1.3.6.1.4.1.5.1.1.69.8.3.2.2
Outbound signaling type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dtmf(2), dp(3), r2(4)  

accPstnTabSigGenT 1.3.6.1.4.1.5.1.1.69.8.4
OBJECT IDENTIFIER    

accPstnTabLineTrace 1.3.6.1.4.1.5.1.1.69.8.4.1
Depth of messages to be displayed in the trace.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupType 1.3.6.1.4.1.5.1.1.69.8.4.2
Line supervision type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER r2(1), em(2), none(3)  

accDPSig 1.3.6.1.4.1.5.1.1.69.8.3.5
OBJECT IDENTIFIER    

accDPSigo 1.3.6.1.4.1.5.1.1.69.8.3.5.1
OBJECT IDENTIFIER    

accDPSigoo 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1
OBJECT IDENTIFIER    

accPstnTabSigDpCpEnd 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.1
Action to be performed at end of dial pulse callprogress signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), ringbackbusy(2)  

accPstnTabSigDpCpSt 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.2
Action to be performed at start of dial pulse callprogress signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dial(2)  

accPstnTabSigDpCpTo 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.3
Dial pulse callprogress timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpDt 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.4
Timer for dial pulse digit timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpPm 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.5
Parsemask for dial pulse signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpPmCo 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.6
Count of digits in the dial pulse parsemask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpBrkTime 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.7
Break timer for pulse dialing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpIdTime 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.8
Idle time used for dial pulse digit timing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpMkTime 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.9
Make time used for dial pulse digit timing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpSt 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.10
Signal duration for use in dial pulse sigtimeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accDTMF 1.3.6.1.4.1.5.1.1.69.8.3.4
OBJECT IDENTIFIER    

accDTMFo 1.3.6.1.4.1.5.1.1.69.8.3.4.1
OBJECT IDENTIFIER    

accDTMFoo 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1
OBJECT IDENTIFIER    

accPstnTabSigDtCpEnd 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.1
Call progress end timer for DTMF signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), ringbackbusy(2)  

accPstnTabSigDtCpSt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.2
Call progress start timer for DTMF signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dial(2)  

accPstnTabSigDtCpTo 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.3
Call progress timeout timer for DTMF signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtDt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.4
Digit timeout timer for DTMF signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtIbCpSt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.5
If set to DIAL, ibcallprogress will wait for a dial tone from the other side before starting the call, when set to NONE, it won't.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dial(2)  

accPstnTabSigDtIbCpTp 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.6
Tonepower setting for inbound DTMF calls, from zero to -12 dB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtPm 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.7
Parsemask for DTMF signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtPmCo 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.8
Number of digits in the DTMF parsemask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtSt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.9
DTMF (touch tone) signal timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtHiPwr 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.10
Power of high frequency tone for DTMF signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtLoPwr 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.11
Power of low frequency tone for DTMF signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtOffTime 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.12
Off time for DTMF digit tonetiming.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtOnTime 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.13
On time for DTMF digit tonetiming.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accR2Sig 1.3.6.1.4.1.5.1.1.69.8.3.3.1
OBJECT IDENTIFIER    

accR2Sigo 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1
OBJECT IDENTIFIER    

accPstnTabSigR2CdDig 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.1
Number of called digits to request for an R2 signaling call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2CnDig 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.2
Number of calling digits to request for an R2 signaling call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2ReqCpc 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.3
This object holds the calling party category.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accPstnTabSigR2AdMo 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.4
Group table to use for address termination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER groupBTable(1), groupATable(2)  

accPstnTabSigR2CdInMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.5
Defines the method used to signal a stop after receiving the called number digits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2CdOutMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.6
Defines the method used to signal a stop after sending the called number digits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2CnInMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.7
Defines the method used to signal a stop after receiving the calling number digits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2CnOutMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.8
Defines the mode used to stop sending the calling number digits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2RspInMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.9
Mode used for inbound call signaling (compelled, semi-compelled, none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER compelled(1), semicomp(2), noncomp(3)  

accPstnTabSigR2RspOutMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.10
Mode used for outbound call signaling (compelled, semi-compelled, none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER compelled(1), semicomp(2), noncomp(3)  

accPstnTabSigR2ObCpc 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.11
Calling party category used for outbound calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER operator(1), ordinary(2), priority(3), data(4), maintenance(5)  

accPstnTabSigR2ObDflt 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.12
Called number used for outbound calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2ScDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.13
Holds the semi-compelled tone duration, used in either direction (inbound, outbound).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2RspInDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.14
Maximum inbound signaling response duration for R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2RspOutDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.15
Maximum outbound signaling response duration for R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2InDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.16
Signaling timeout for inbound R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2OutDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.17
Signaling timeout for outbound R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2InHiPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.18
High frequency tonepower setting for incoming calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2InLoPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.19
Low frequency tonepower setting for incoming calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2OutHiPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.20
High frequency tone power setting for outbound calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2OutLoPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.21
Low frequency tone power setting for outbound calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTableInt 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.22
TBLSET currently in use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTTIndex 1.3.6.1.4.1.5.1.1.69.8.3.3.3
Setting default timer for tonetables
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accToneSupoo 1.3.6.1.4.1.5.1.1.69.8.3.3.2
OBJECT IDENTIFIER    

accPstnTable 1.3.6.1.4.1.5.1.1.69.8.3.3.2.1
Used for set tonetable command, determines which TBLSET will be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnSignal 1.3.6.1.4.1.5.1.1.69.8.3.3.2.2
Signal currently in use (for tonetable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnFwdIntGI 1.3.6.1.4.1.5.1.1.69.8.3.3.2.3
Forward interpretation GI possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER digit1(1), digit2(2), digit3(3), digit4(4), digit5(5), digit6(6), digit7(7), digit8(8), digit9(9), digit0(10), incomingOperator(11), delayOperator(12), accessTestEquipment(13), requireHalfEchoSuppressor(14), endOfInformation(15), spare(200)  

accPstnFwdIntGII 1.3.6.1.4.1.5.1.1.69.8.3.3.2.4
Forward interpretation GII possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nationalSubscriber(1), nationalPrioritySubscriber(2), nationalMaintenanceEquipment(3), nationalOp(5), nationalDataTransmission(6), internationalSubscriber(7), internationalDataTrans(8), internationalPrioritySubscriber(9), internationalOp(10), spare(200)  

accPstnFwdGenGI 1.3.6.1.4.1.5.1.1.69.8.3.3.2.5
Forward generation GI possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER digit1(1), digit2(2), digit3(3), digit4(4), digit5(5), digit6(6), digit7(7), digit8(8), digit9(9), digit0(10), incomingOperator(11), delayOperator(12), accessTestEquipment(13), requireHalfEchoSuppressor(14), endOfInformation(15), spare(200)  

accPstnFwdGenGII 1.3.6.1.4.1.5.1.1.69.8.3.3.2.6
Forward generation GII possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nationalSubscriber(1), nationalPrioritySubscriber(2), nationalMaintenanceEquipment(3), nationalOp(5), nationalDataTransmission(6), internationalSubscriber(7), internationalDataTrans(8), internationalPrioritySubscriber(9), internationalOp(10), spare(200)  

accPstnBckIntGA 1.3.6.1.4.1.5.1.1.69.8.3.3.2.7
Backward interpretation GA possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sndNextDig(17), sndDigN1(18), addCmpltRcvB(19), congestNat(20), sndCpc(21), addCmpltEndSig(22), sndDigN2(23), sndDigN3(24), snd1stDig(25), sndCpcGoC(26), countryC(27), langDig(28), natureCirct-sndCallingLn(29), echoSup-sndSigGroup2(30), congestInt-vacnt(31), spare(200)  

accPstnBckIntGB 1.3.6.1.4.1.5.1.1.69.8.3.3.2.8
Backward interpretation GB possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendSpecialInformationTone(18), subscriberLineBusy(19), congestion(20), unallocatedNumber(21), subscriberLineFreeCharge(22), subscriberLineFreeNoCharge(23), subscriberLineOutOfService(24), spare(200)  

accPstnBckIntGC 1.3.6.1.4.1.5.1.1.69.8.3.3.2.9
Backward interpretation GC possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendNextCallingDigit(17), sendFirstCalledDigit(18), sendGroupB(19), congestionC(20), sendNextCalledDigit(21), sendSameCalledDigit(22), spare(200)  

accPstnBckGenGA 1.3.6.1.4.1.5.1.1.69.8.3.3.2.10
Backward generation GA possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sndNextDig(17), sndDigN1(18), addCmpltrcvB(19), congestNat(20), sndCpc(21), addCmpltendSig(22), sndDigN2(23), sndDigN3(24), snd1stDig(25), sndCpcGoC(26), countryC(27), langDig(28), natureCirct-sndCallingLn(29), echoSup-sndSigGroup2(30), congestint-vacnt(31), spare(200)  

accPstnBckGenGB 1.3.6.1.4.1.5.1.1.69.8.3.3.2.11
Backward generation GB possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendSpecialInformationTone(18), subscriberLineBusy(19), congestion(20), unallocatedNumber(21), subscriberLineFreeCharge(22), subscriberLineFreeNoCharge(23), subscriberLineOutOfService(24), spare(200)  

accPstnBckGenGC 1.3.6.1.4.1.5.1.1.69.8.3.3.2.12
Backward generation GC possible token values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sendNextCallingDigit(17), sendFirstCalledDigit(18), sendGroupB(19), congestionC(20), sendNextCalledDigit(21), sendSameCalledDigit(22), spare(200)  

accPstnTableDef 1.3.6.1.4.1.5.1.1.69.8.3.3.2.13
Default tonetable values. (sets all 4 TBLSETs, current will be set upon system reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.14
Display object for TBLSET 1, forward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.15
Display object for TBLSET 2, forward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.16
Display object for TBLSET 3, forward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.17
Display object for TBLSET 4, forward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.18
Display object for TBLSET 1, forward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.19
Display object for TBLSET 2, forward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.20
Display object for TBLSET 3, forward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.21
Display object for TBLSET 4, forward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.22
Display object for TBLSET 1, backward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.23
Display object for TBLSET 2, backward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.24
Display object for TBLSET 3, backward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.25
Display object for TBLSET 4, backward generation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.26
Display object for TBLSET 1, backward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.27
Display object for TBLSET 2, backward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.28
Display object for TBLSET 3, backward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.29
Display object for TBLSET 4, backward interpretation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnSupGen 1.3.6.1.4.1.5.1.1.69.8.4.4
OBJECT IDENTIFIER    

accEMLinSup 1.3.6.1.4.1.5.1.1.69.8.4.4.1
OBJECT IDENTIFIER    

accEMLinSupo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1
OBJECT IDENTIFIER    

accPstnTabSupEmDsOutStDly 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.1
Delay Dial Start Dial delay time for outbound E&M calls
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmGl 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.2
Notifies call of what to do if glare (call attempts in opposite directions on the same line, at the same time) occurs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

accPstnTabSupEmImOutStDly 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.3
Start delay for use in Immediate Start Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiInDur 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.4
Duration of incoming wink timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiOutEndTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.5
Wink end timeout for outgoing E&M calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiOutStDly 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.6
Wink start delay duration for outgoing E&M calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiOutStTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.7
Wink start timeout duration for outgoing E&M calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupInMode 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.8
E&M incoming call mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER immediate(1), wink(2), delayed(3)  

accPstnTabSupOutMode 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.9
E&M outgoing call mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER immediate(1), wink(2), delayed(3)  

accPstnTabSupEmDsInDur 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.11
E&M delay dial start delay incoming timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmDsOutEndTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.12
E&M delay dial start delay outgoing end timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmDsOutStTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.13
E&M delay dial start delay outgoing start timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accR2LinSupoo 1.3.6.1.4.1.5.1.1.69.8.4.4.3
OBJECT IDENTIFIER    

accPstnTabSupR2AnAnsDly 1.3.6.1.4.1.5.1.1.69.8.4.4.3.1
Answer delay duration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2AnInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.2
Answer pattern used for incoming calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2AnOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.3
Answer pattern used for outgoing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2AnRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.4
Recognition timer for answer pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2BlInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.5
Blocking pattern for incoming R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2BlOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.6
Blocking pattern for outgoing R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2BlRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.7
Recognition timer for block pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2CbFcbTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.8
Forced clearback timer duration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2CbInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.9
Clear backward pattern for incoming R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CbOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.10
Clear backward pattern for outgoing R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CbRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.11
Recognition timer for clear backward pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2CfInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.12
Clear forward pattern for incoming R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CfOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.13
Clear forward pattern for outgoing R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CfRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.14
Recognition timer for clear forward pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2Gl 1.3.6.1.4.1.5.1.1.69.8.4.4.3.15
Action to be taken if glare (call attempts in opposite directions on the same line, at the same time) occurs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

accPstnTabSupR2IdInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.16
Idle pattern for incoming R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2IdOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.17
Idle pattern for outgoing R2 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2IdRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.18
Recognition timer for Idle R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2Mask 1.3.6.1.4.1.5.1.1.69.8.4.4.3.19
Parse mask used for R2 line supervision.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SaInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.20
Inbound call pattern for szack R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SaOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.21
Outbound call pattern for szack R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SaRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.22
Recognition timer for szack R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2SzInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.23
Inbound call pattern for seize R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SzOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.24
Outbound call pattern for seize R2 signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SzRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.25
Recognition timer for seize signaling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.26
Inbound metering pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16), disabled(17)  

accPstnTabSupR2MeOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.27
Outbound metering pattern.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16), disabled(17)  

accPstnTabSupR2MeRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.28
Recognition timer for the metering patterns.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeDly 1.3.6.1.4.1.5.1.1.69.8.4.4.3.29
Delay timer for the metering patterns.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeOffTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.30
Metering pattern offtime timer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeOnTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.31
Metering pattern ontime.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accMisc 1.3.6.1.4.1.5.1.1.69.8.5
OBJECT IDENTIFIER    

accDsprmMessageLevel 1.3.6.1.4.1.5.1.1.69.8.5.1
Level for depth of messages from the DSPRM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnTabPstnDslIndex 1.3.6.1.4.1.5.1.1.69.8.5.2
Wonky index, used for displaying tables. (c/o james)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accPstnOperstatus 1.3.6.1.4.1.5.1.1.69.8.5.3
Current use of DSP (unallocated, idle, modem...)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accDsprmRelnqshFailTrap 1
Indicates that Relinquish has failed. SEVERITY-DEFAULT: Indeterminate EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 0
TRAP-TYPE    

accDsprmLdspNotInUseTrap 2
Indicates that send has failed becuse LDSP is not in use. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
TRAP-TYPE    

accDsprmCucbErrTrap 3
Indicates that send has failed becuse of CUCB error SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
TRAP-TYPE    

accDsprmNoDataTrap 4
Indicates that send has failed becuse of no data SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
TRAP-TYPE    

accDsprmMemAllocTrap 5
Indicates that memory allocation failed for the NCI SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 32
TRAP-TYPE    

accDsprmInvMplTrap 6
Indicates that a packet has been received with an invalid MPL type SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 5
TRAP-TYPE