ACC-L2TP

File: ACC-L2TP.mib (57272 bytes)

Imported modules

RFC1155-SMI RFC-1215 ACC-SYSTEM
ACC-MIB SNMPv2-TC

Imported symbols

OBJECT-TYPE IpAddress TimeTicks
Gauge Counter TRAP-TYPE
accTrapLogSeqNum accBRG DisplayString
IfIndex SmdsAddress RowStatus

Defined Types

AccL2tpTunnelConfigEntry  
SEQUENCE    
  accL2tpTunnelConfigTunnelIfIndex INTEGER
  accL2tpTunnelConfigControlRWS INTEGER
  accL2tpTunnelConfigPayloadSeq INTEGER
  accL2tpTunnelConfigPayloadRWS INTEGER
  accL2tpTunnelConfigKeepAlive INTEGER
  accL2tpTunnelConfigMaxAckTimeout INTEGER
  accL2tpTunnelConfigMaxRetrans INTEGER
  accL2tpTunnelConfigIdleDisconnect INTEGER
  accL2tpTunnelConfigTransportMech INTEGER
  accL2tpTunnelConfigTunnelAuthentication INTEGER
  accL2tpTunnelConfigProxyAuthentication INTEGER
  accL2tpTunnelConfigMessageLevel INTEGER
  accL2tpTunnelConfigDebugMask INTEGER
  accL2tpTunnelConfigPayLoadLength INTEGER
  accL2tpTunnelConfigAttributeHiding INTEGER
  accL2tpTunnelConfigCallConfirm INTEGER
  accL2tpTunnelConfigEvents INTEGER
  accL2tpTunnelConfigCreate RowStatus
  accL2tpTunnelConfigStatus RowStatus

AccL2tpTunnelStatusEntry  
SEQUENCE    
  accL2tpTunnelStatusTunnelIfIndex INTEGER
  accL2tpTunnelStatusLocalTunnelId INTEGER
  accL2tpTunnelStatusRemTunnelId INTEGER
  accL2tpTunnelStatusRemFraming INTEGER
  accL2tpTunnelStatusRemBearerCap INTEGER
  accL2tpTunnelStatusRemControlRWS INTEGER
  accL2tpTunnelStatusRemKeepAlive INTEGER
  accL2tpTunnelStatusRemVendorName DisplayString
  accL2tpTunnelStatusRemFirmRev DisplayString
  accL2tpTunnelStatusRemHostName DisplayString
  accL2tpTunnelStatusRemProtocolVer DisplayString
  accL2tpTunnelStatusTunnelState INTEGER
  accL2tpTunnelStatusKeepAlive INTEGER
  accL2tpTunnelStatusCalcRemRWS Gauge
  accL2tpTunnelStatusCalcRemRetransTimeout Gauge
  accL2tpTunnelStatusQueueLength Gauge
  accL2tpTunnelStatusTxOctets Counter
  accL2tpTunnelStatusTxPackets Counter
  accL2tpTunnelStatusRxOctets Counter
  accL2tpTunnelStatusRxPackets Counter
  accL2tpTunnelStatusTotalSessions Counter
  accL2tpTunnelStatusActiveSessions Gauge
  accL2tpTunnelStatusAttemptFails Counter
  accL2tpTunnelStatusRetransTimeouts Counter
  accL2tpTunnelStatusBackwardTransitions Counter
  accL2tpTunnelStatusLastTransitions TimeTicks
  accL2tpTunnelStatusLastCause DisplayString
  accL2tpTunnelStatusNextSendSeq INTEGER
  accL2tpTunnelStatusNextSendSeqAck INTEGER
  accL2tpTunnelStatusRecvSeq INTEGER
  accL2tpTunnelStatusRecvSeqAck INTEGER
  accL2tpTunnelStatusOutOfSeqs Counter
  accL2tpTunnelStatusOutOfSeqQLen Gauge
  accL2tpTunnelStatusOutOfWindows Counter
  accL2tpTunnelStatusInDiscards Counter
  accL2tpTunnelStatusOutDiscards Counter

AccL2tpSessionEntry  
SEQUENCE    
  accL2tpSessionTunnelIfIndex INTEGER
  accL2tpSessionCallType INTEGER
  accL2tpSessionLocalCallId INTEGER
  accL2tpSessionRemoteCallId INTEGER
  accL2tpSessionCallSerialId DisplayString
  accL2tpSessionRemoteHostName DisplayString
  accL2tpSessionPhysChanId INTEGER
  accL2tpSessionBearerCap INTEGER
  accL2tpSessionFramingCap INTEGER
  accL2tpSessionConnectSpeed INTEGER
  accL2tpSessionDNIS DisplayString
  accL2tpSessionCLID DisplayString
  accL2tpSessionSubAddress DisplayString
  accL2tpSessionRemoteRWS INTEGER
  accL2tpSessionRemotePPD INTEGER
  accL2tpSessionProxyPpp INTEGER
  accL2tpSessionAuthMethod INTEGER
  accL2tpSessionState INTEGER
  accL2tpSessionLocalPort INTEGER

AccL2tpSessionStatusEntry  
SEQUENCE    
  accL2tpSessionStatusTunnelIfIndex INTEGER
  accL2tpSessionStatusLocalCallId INTEGER
  accL2tpSessionStatusInDiscards Counter
  accL2tpSessionStatusTxSequenceResets Counter
  accL2tpSessionStatusCalcRWS Gauge
  accL2tpSessionStatusTxQueueLength Gauge
  accL2tpSessionStatusNextSendSeq INTEGER
  accL2tpSessionStatusNextSendSeqAck INTEGER
  accL2tpSessionStatusNextRecvSeq INTEGER
  accL2tpSessionStatusNextRecvSeqAck INTEGER
  accL2tpSessionStatusOutOfSeqs Counter
  accL2tpSessionStatusOutOfSeqQLen Gauge
  accL2tpSessionStatusTxOctets Counter
  accL2tpSessionStatusTxPackets Counter
  accL2tpSessionStatusRxOctets Counter
  accL2tpSessionStatusRxPackets Counter
  accL2tpSessionStatusOutDiscards Counter
  accL2tpSessionStatusOutOfWindows Counter
  accL2tpSessionStatusRxSequenceResets INTEGER

AccL2tpEndpointDomainEntry  
SEQUENCE    
  accL2tpEndpointDomain DisplayString
  accL2tpEndpointDomainSecret DisplayString
  accL2tpEndpointDomainNumberGroup INTEGER
  accL2tpEndpointDomainStatus RowStatus

AccL2tpUdpTransportEntry  
SEQUENCE    
  accL2tpUdpTransportTunnelIfIndex INTEGER
  accL2tpUdpTransportEndpointIpAddress IpAddress
  accL2tpUdpTransportPort INTEGER
  accL2tpUdpTransportPayloadCksum INTEGER
  accL2tpUdpTransportFixedAddress INTEGER
  accL2tpUdpTransportStatus RowStatus

AccL2tpUdpConnectionEntry  
SEQUENCE    
  accL2tpUdpConnectionTunnelIfIndex INTEGER
  accL2tpUdpConnectionEndpointIpAddress IpAddress
  accL2tpUdpConnectionRxPort INTEGER
  accL2tpUdpConnectionTxPort INTEGER
  accL2tpUdpConnectionAddressChanges Counter

Defined Values

accL2tp 1.3.6.1.4.1.5.1.1.71
OBJECT IDENTIFIER    

accL2tpGeneral 1.3.6.1.4.1.5.1.1.71.1
OBJECT IDENTIFIER    

accL2tpGeneralScalars 1.3.6.1.4.1.5.1.1.71.1.1
OBJECT IDENTIFIER    

accL2tpTransport 1.3.6.1.4.1.5.1.1.71.2
OBJECT IDENTIFIER    

accL2tpTransportUdp 1.3.6.1.4.1.5.1.1.71.2.1
OBJECT IDENTIFIER    

accL2tpTransportUdpScalars 1.3.6.1.4.1.5.1.1.71.2.1.1
OBJECT IDENTIFIER    

accL2tpVendorName 1.3.6.1.4.1.5.1.1.71.1.1.1
Vendor Name
OBJECT-TYPE    
  DisplayString  

accL2tpFirmwareRev 1.3.6.1.4.1.5.1.1.71.1.1.2
Firmware Revision
OBJECT-TYPE    
  DisplayString  

accL2pAdminState 1.3.6.1.4.1.5.1.1.71.1.1.3
L2TP Adminstrative state.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accL2tpProtocolVersion 1.3.6.1.4.1.5.1.1.71.1.1.4
L2TP Protocol Version
OBJECT-TYPE    
  DisplayString  

accL2tpControlRWS 1.3.6.1.4.1.5.1.1.71.1.1.5
Default Control Window Size adopted by Dynamically created L2TP Tunnels
OBJECT-TYPE    
  INTEGER 1..16  

accL2tpPayloadSeq 1.3.6.1.4.1.5.1.1.71.1.1.6
If set to ON, the remote peer will wait for an acknowledgement after sending Payload RWS messages
OBJECT-TYPE    
  INTEGER on(1), off(2)  

accL2tpPayloadRWS 1.3.6.1.4.1.5.1.1.71.1.1.7
When Payload Sequencing is set to YES, the remote peer will wait for an acknowledgement after sending this many messages
OBJECT-TYPE    
  INTEGER 1..32  

accL2tpKeepAlive 1.3.6.1.4.1.5.1.1.71.1.1.8
Default Hello control message interval
OBJECT-TYPE    
  INTEGER 0..3600  

accL2tpMaxAckTimeout 1.3.6.1.4.1.5.1.1.71.1.1.9
Timeout interval for both Control and Payload acknowledgements
OBJECT-TYPE    
  INTEGER 5..120  

accL2tpMaxRetrans 1.3.6.1.4.1.5.1.1.71.1.1.10
Maximum number of Retransmissions before assuming a peer is not responding.
OBJECT-TYPE    
  INTEGER 0..64  

accL2tpIdleDisconnect 1.3.6.1.4.1.5.1.1.71.1.1.11
Interval in which to wait after the last payload session within the tunnel disconnects before tearing down the tunnel itself
OBJECT-TYPE    
  INTEGER 0..3600  

accL2tpTunnelAuthentication 1.3.6.1.4.1.5.1.1.71.1.1.12
Default sevurity method for dynamically created L2TP Tunnels
OBJECT-TYPE    
  INTEGER none(1), endpointauth(2)  

accL2tpKeyDistribution 1.3.6.1.4.1.5.1.1.71.1.1.13
Method to obtain it's secrets for the specified security method
OBJECT-TYPE    
  INTEGER static(1), radius(2)  

accL2tpProxyAuthentication 1.3.6.1.4.1.5.1.1.71.1.1.14
Causes the L2TP protocol to ignore the proxy authentication information obtained by the L2TP access concentrator (LAC) if the proxy authentication method is CHAP. When L2TP ignores the proxy authentication, the PPP protocol is forced to challenge the remote client again.
OBJECT-TYPE    
  INTEGER ignore(1), accept(2)  

accL2tpServerState 1.3.6.1.4.1.5.1.1.71.1.1.15
Enables or disables L2TP UDP Transport Server.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accL2tpMessageLevel 1.3.6.1.4.1.5.1.1.71.1.1.16
L2TP Message Level
OBJECT-TYPE    
  INTEGER 1..7  

accL2tpDebugMask 1.3.6.1.4.1.5.1.1.71.1.1.17
Set in conjunction with L2TP Message Level to filter out messages
OBJECT-TYPE    
  INTEGER 0..255  

accL2tpPayLoadLength 1.3.6.1.4.1.5.1.1.71.1.1.18
Used to configure the L2TP default action regarding payload lengths
OBJECT-TYPE    
  INTEGER included(1), excluded(2)  

accL2tpAttributeHiding 1.3.6.1.4.1.5.1.1.71.1.1.19
Configures the way that L2TP handles attribute value pairs (AVPs). Enabling this option causes L2TP to 'hide' AVPs typically considered sensitive.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accL2tpCallConfirm 1.3.6.1.4.1.5.1.1.71.1.1.20
Configures the Call Confirm operation on L2TP LAC. When enabled it causes the LAC to verify that the LNS will proceed with a particular call.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accL2tpTunnelConfigTable 1.3.6.1.4.1.5.1.1.71.1.2
Displays all L2TP Tunnel entries configured on the system
OBJECT-TYPE    
  SEQUENCE OF  
    AccL2tpTunnelConfigEntry

accL2tpTunnelConfigEntry 1.3.6.1.4.1.5.1.1.71.1.2.1
Tok_String
OBJECT-TYPE    
  AccL2tpTunnelConfigEntry  

accL2tpTunnelConfigTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.2.1.1
Interface index for a tunnel port
OBJECT-TYPE    
  INTEGER 0..4294967295  

accL2tpTunnelConfigControlRWS 1.3.6.1.4.1.5.1.1.71.1.2.1.2
Default Control Window Size adopted by Dynamically created L2TP Tunnels
OBJECT-TYPE    
  INTEGER 1..16  

accL2tpTunnelConfigPayloadSeq 1.3.6.1.4.1.5.1.1.71.1.2.1.3
If set to ON, the remote peer will wait for an acknowledgement after sending Payload RWS messages
OBJECT-TYPE    
  INTEGER on(1), off(2)  

accL2tpTunnelConfigPayloadRWS 1.3.6.1.4.1.5.1.1.71.1.2.1.4
When Payload Sequencing is set to YES, the remote peer will wait for an acknowledgement after sending this many messages
OBJECT-TYPE    
  INTEGER 1..32  

accL2tpTunnelConfigKeepAlive 1.3.6.1.4.1.5.1.1.71.1.2.1.5
Default Hello control message interval
OBJECT-TYPE    
  INTEGER 0..3600  

accL2tpTunnelConfigMaxAckTimeout 1.3.6.1.4.1.5.1.1.71.1.2.1.6
Timeout interval for both Control and Payload acknowledgements
OBJECT-TYPE    
  INTEGER 5..120  

accL2tpTunnelConfigMaxRetrans 1.3.6.1.4.1.5.1.1.71.1.2.1.7
Maximum number of Retransmissions before assuming a peer is not responding.
OBJECT-TYPE    
  INTEGER 0..64  

accL2tpTunnelConfigIdleDisconnect 1.3.6.1.4.1.5.1.1.71.1.2.1.8
Interval in which to wait after the last payload session within the tunnel disconnects before tearing down the tunnel itself
OBJECT-TYPE    
  INTEGER 0..3600  

accL2tpTunnelConfigTransportMech 1.3.6.1.4.1.5.1.1.71.1.2.1.9
Type of Transport layer protocol that L2TP should use for this tunnel
OBJECT-TYPE    
  INTEGER udp(1), framerelay(2)  

accL2tpTunnelConfigTunnelAuthentication 1.3.6.1.4.1.5.1.1.71.1.2.1.10
Configures the tunnel peer authentication method used for dynamically created L2TP tunnels.
OBJECT-TYPE    
  INTEGER enable(1), disabled(2)  

accL2tpTunnelConfigProxyAuthentication 1.3.6.1.4.1.5.1.1.71.1.2.1.11
Causes the L2TP protocol to ignore the proxy authentication information obtained by the access concentrator if the proxy authentication method is CHAP.
OBJECT-TYPE    
  INTEGER ignore(1), accept(2)  

accL2tpTunnelConfigMessageLevel 1.3.6.1.4.1.5.1.1.71.1.2.1.12
L2TP Message Level
OBJECT-TYPE    
  INTEGER 1..7  

accL2tpTunnelConfigDebugMask 1.3.6.1.4.1.5.1.1.71.1.2.1.13
Set in conjunction with L2TP Message Level to filter out messages
OBJECT-TYPE    
  INTEGER 0..255  

accL2tpTunnelConfigPayLoadLength 1.3.6.1.4.1.5.1.1.71.1.2.1.14
Used to configure the L2TP default action regarding payload lengths. Including the payload length in the L2TP payload L2TP header enables some vendors to avoid recalculating the payload length. Disabling this option informs L2TP not to include the payload length in the L2TP packet header, reducing the overall L2TP packet size by two bytes. Entering this command without specifying a setting causes the L2TP tunnel payload length to return to its default setting.
OBJECT-TYPE    
  INTEGER included(1), excluded(2)  

accL2tpTunnelConfigAttributeHiding 1.3.6.1.4.1.5.1.1.71.1.2.1.15
Configures the way that L2TP handles attribute value pairs (AVP's). Disabling this parameter causes all AVPs to be sent without encryption; this might be necessary when tunneling to a peer that does not support attribute hiding. If this command is entered without specifying a setting, attribute hiding returns to its default setting.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accL2tpTunnelConfigCallConfirm 1.3.6.1.4.1.5.1.1.71.1.2.1.16
Configures the Call Confirm operation on L2TP LAC. When enabled it causes the LAC to verify that the LNS will proceed with a particular call. If the LNS is not able to proceed with the call because of missing information in the call setup message or resource limitations, the LNS rejects the call. This, in turn, causes the LAC to disconnect the remote user. If the LAC is configured to perform called number tunneling, or the called number authorization mode is 'VPSM,' the incoming call will not be answered until the LAC has confirmed the call with the LNS. Enabling this option can lessen needless call charges. The LAC confirms the call with the LNS when the LAC sends an initial session setup message, including called and calling number information, to the LNS.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accL2tpTunnelConfigEvents 1.3.6.1.4.1.5.1.1.71.1.2.1.17
This object is used to generate events into the tunnel state machine. For example a 'open' will cause the tunnel to be forced open if it is idle. A 'close' will cause a disconnect of a established tunnel
OBJECT-TYPE    
  INTEGER open(1), close(2)  

accL2tpTunnelConfigCreate 1.3.6.1.4.1.5.1.1.71.1.2.1.18
The current status of this entry. It can be used to create and delete tunnel entries.
OBJECT-TYPE    
  RowStatus  

accL2tpTunnelConfigStatus 1.3.6.1.4.1.5.1.1.71.1.2.1.19
The current status of this entry.
OBJECT-TYPE    
  RowStatus  

accL2tpTunnelStatusTable 1.3.6.1.4.1.5.1.1.71.1.3
Displays status of all L2TP Tunnel entries Configured on the system
OBJECT-TYPE    
  SEQUENCE OF  
    AccL2tpTunnelStatusEntry

accL2tpTunnelStatusEntry 1.3.6.1.4.1.5.1.1.71.1.3.1
Tok_String
OBJECT-TYPE    
  AccL2tpTunnelStatusEntry  

accL2tpTunnelStatusTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.3.1.1
Interface index for a tunnel port
OBJECT-TYPE    
  INTEGER 0..4294967295  

accL2tpTunnelStatusLocalTunnelId 1.3.6.1.4.1.5.1.1.71.1.3.1.2
Local Tunnel port Id
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpTunnelStatusRemTunnelId 1.3.6.1.4.1.5.1.1.71.1.3.1.3
Remote Tunnel port Id
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpTunnelStatusRemFraming 1.3.6.1.4.1.5.1.1.71.1.3.1.4
Remote Framing
OBJECT-TYPE    
  INTEGER sync(1), async(2), syncasync(3)  

accL2tpTunnelStatusRemBearerCap 1.3.6.1.4.1.5.1.1.71.1.3.1.5
Remote Bearer Capabilities
OBJECT-TYPE    
  INTEGER digital(1), analog(2), digitalanalog(3)  

accL2tpTunnelStatusRemControlRWS 1.3.6.1.4.1.5.1.1.71.1.3.1.6
Control Window Size adopted by Remote end of L2TP Tunnels
OBJECT-TYPE    
  INTEGER 1..16  

accL2tpTunnelStatusRemKeepAlive 1.3.6.1.4.1.5.1.1.71.1.3.1.7
Remote Hello control message interval
OBJECT-TYPE    
  INTEGER 0..3600  

accL2tpTunnelStatusRemVendorName 1.3.6.1.4.1.5.1.1.71.1.3.1.8
Remote Vendor Name
OBJECT-TYPE    
  DisplayString  

accL2tpTunnelStatusRemFirmRev 1.3.6.1.4.1.5.1.1.71.1.3.1.9
Remote Firmware Revision
OBJECT-TYPE    
  DisplayString  

accL2tpTunnelStatusRemHostName 1.3.6.1.4.1.5.1.1.71.1.3.1.10
Remote Host Name
OBJECT-TYPE    
  DisplayString  

accL2tpTunnelStatusRemProtocolVer 1.3.6.1.4.1.5.1.1.71.1.3.1.11
Remote Protocol Version
OBJECT-TYPE    
  DisplayString  

accL2tpTunnelStatusTunnelState 1.3.6.1.4.1.5.1.1.71.1.3.1.12
Indicates the current state of the L2TP Tunnel
OBJECT-TYPE    
  INTEGER idle(1), waitreply(2), waitconn(3), established(4), waitstop(5)  

accL2tpTunnelStatusKeepAlive 1.3.6.1.4.1.5.1.1.71.1.3.1.13
Default Hello control message interval
OBJECT-TYPE    
  INTEGER 0..3600  

accL2tpTunnelStatusCalcRemRWS 1.3.6.1.4.1.5.1.1.71.1.3.1.14
Calculated Remote RWS
OBJECT-TYPE    
  Gauge  

accL2tpTunnelStatusCalcRemRetransTimeout 1.3.6.1.4.1.5.1.1.71.1.3.1.15
Calculated Remote Retransmit Timeout
OBJECT-TYPE    
  Gauge  

accL2tpTunnelStatusQueueLength 1.3.6.1.4.1.5.1.1.71.1.3.1.16
Queue Length
OBJECT-TYPE    
  Gauge  

accL2tpTunnelStatusTxOctets 1.3.6.1.4.1.5.1.1.71.1.3.1.17
Octets Transmitted
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusTxPackets 1.3.6.1.4.1.5.1.1.71.1.3.1.18
Packets Transmitted
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusRxOctets 1.3.6.1.4.1.5.1.1.71.1.3.1.19
Octets Received
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusRxPackets 1.3.6.1.4.1.5.1.1.71.1.3.1.20
Packets Received
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusTotalSessions 1.3.6.1.4.1.5.1.1.71.1.3.1.21
Total Sessions
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusActiveSessions 1.3.6.1.4.1.5.1.1.71.1.3.1.22
Active Sessions
OBJECT-TYPE    
  Gauge  

accL2tpTunnelStatusAttemptFails 1.3.6.1.4.1.5.1.1.71.1.3.1.23
Failed Attempts
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusRetransTimeouts 1.3.6.1.4.1.5.1.1.71.1.3.1.24
Retransmit timeouts
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusBackwardTransitions 1.3.6.1.4.1.5.1.1.71.1.3.1.25
Number of Backward transmissions
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusLastTransitions 1.3.6.1.4.1.5.1.1.71.1.3.1.26
Time since Last Transition
OBJECT-TYPE    
  TimeTicks  

accL2tpTunnelStatusLastCause 1.3.6.1.4.1.5.1.1.71.1.3.1.27
Cause for Last Transition
OBJECT-TYPE    
  DisplayString  

accL2tpTunnelStatusNextSendSeq 1.3.6.1.4.1.5.1.1.71.1.3.1.28
Shows the next sequence number to be sent in the next control packet.
OBJECT-TYPE    
  INTEGER  

accL2tpTunnelStatusNextSendSeqAck 1.3.6.1.4.1.5.1.1.71.1.3.1.29
Shows the sequence number acknowledged by the terminal peer.
OBJECT-TYPE    
  INTEGER  

accL2tpTunnelStatusRecvSeq 1.3.6.1.4.1.5.1.1.71.1.3.1.30
Shows the last sequence number received in a control packet.
OBJECT-TYPE    
  INTEGER  

accL2tpTunnelStatusRecvSeqAck 1.3.6.1.4.1.5.1.1.71.1.3.1.31
Shows the last sequence number this L2TP entity has acknowledged to the remote peer as received.
OBJECT-TYPE    
  INTEGER  

accL2tpTunnelStatusOutOfSeqs 1.3.6.1.4.1.5.1.1.71.1.3.1.32
Indicates the number of control packets that were received out of sequence.
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusOutOfSeqQLen 1.3.6.1.4.1.5.1.1.71.1.3.1.33
Indicates the number of control packets that were received out of sequence. These control packets wait for a specified time in the out of sequence queue for the packet with the missing sequence number.
OBJECT-TYPE    
  Gauge  

accL2tpTunnelStatusOutOfWindows 1.3.6.1.4.1.5.1.1.71.1.3.1.34
The number of control packets that were received outside of the offered sequence window size.
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusInDiscards 1.3.6.1.4.1.5.1.1.71.1.3.1.35
The number of packets that are discarded coming in.
OBJECT-TYPE    
  Counter  

accL2tpTunnelStatusOutDiscards 1.3.6.1.4.1.5.1.1.71.1.3.1.36
The number of packets that are discarded going out.
OBJECT-TYPE    
  Counter  

accL2tpSessionTable 1.3.6.1.4.1.5.1.1.71.1.5
Displays all L2TP Tunnel entries configured on the system
OBJECT-TYPE    
  SEQUENCE OF  
    AccL2tpSessionEntry

accL2tpSessionEntry 1.3.6.1.4.1.5.1.1.71.1.5.1
Tok_String
OBJECT-TYPE    
  AccL2tpSessionEntry  

accL2tpSessionTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.5.1.1
Interface index for tunnel port
OBJECT-TYPE    
  INTEGER 0..4294967295  

accL2tpSessionCallType 1.3.6.1.4.1.5.1.1.71.1.5.1.2
Call Direction
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

accL2tpSessionLocalCallId 1.3.6.1.4.1.5.1.1.71.1.5.1.3
Session Identifier used by Local Tunnel Endpoint for this session
OBJECT-TYPE    
  INTEGER 1..65535  

accL2tpSessionRemoteCallId 1.3.6.1.4.1.5.1.1.71.1.5.1.4
Session Identifier used by Remote Tunnel Endpoint for this session
OBJECT-TYPE    
  INTEGER 1..65535  

accL2tpSessionCallSerialId 1.3.6.1.4.1.5.1.1.71.1.5.1.5
Serial ID for this session
OBJECT-TYPE    
  DisplayString  

accL2tpSessionRemoteHostName 1.3.6.1.4.1.5.1.1.71.1.5.1.6
Remote Host Name
OBJECT-TYPE    
  DisplayString  

accL2tpSessionPhysChanId 1.3.6.1.4.1.5.1.1.71.1.5.1.7
Port Identifier of the Physical Port being tunneled at the other end of this tunnel
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpSessionBearerCap 1.3.6.1.4.1.5.1.1.71.1.5.1.8
Type of call that has been physically terminated at the LAC
OBJECT-TYPE    
  INTEGER digital(1), analog(2)  

accL2tpSessionFramingCap 1.3.6.1.4.1.5.1.1.71.1.5.1.9
Type of call that has been physically terminated at the LAC
OBJECT-TYPE    
  INTEGER sync(1), async(2)  

accL2tpSessionConnectSpeed 1.3.6.1.4.1.5.1.1.71.1.5.1.10
LAC's Negotiated Modem Speed
OBJECT-TYPE    
  INTEGER 0..4294967295  

accL2tpSessionDNIS 1.3.6.1.4.1.5.1.1.71.1.5.1.11
Phone number dialed by the Remote User
OBJECT-TYPE    
  DisplayString  

accL2tpSessionCLID 1.3.6.1.4.1.5.1.1.71.1.5.1.12
Phone number that the Remote User is dialing from
OBJECT-TYPE    
  DisplayString  

accL2tpSessionSubAddress 1.3.6.1.4.1.5.1.1.71.1.5.1.13
Additional Addressing Information
OBJECT-TYPE    
  DisplayString  

accL2tpSessionRemoteRWS 1.3.6.1.4.1.5.1.1.71.1.5.1.14
Payload Receive Window Size that the remote endpoint has requested for this session
OBJECT-TYPE    
  INTEGER 0..255  

accL2tpSessionRemotePPD 1.3.6.1.4.1.5.1.1.71.1.5.1.15
Packet Processing Delay that the remote endpoint expects to incur for processing a window full of packets received (in 0.1 second units)
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpSessionProxyPpp 1.3.6.1.4.1.5.1.1.71.1.5.1.16
A value of YES indicates that the LAC initiated a PPP session with the remote client before tunneling was performed
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accL2tpSessionAuthMethod 1.3.6.1.4.1.5.1.1.71.1.5.1.17
If Proxy PPP was performed, then this field may indicate the type of authentication that was initiated
OBJECT-TYPE    
  INTEGER none(1), pap(2), chap(3)  

accL2tpSessionState 1.3.6.1.4.1.5.1.1.71.1.5.1.18
Current state of the session
OBJECT-TYPE    
  INTEGER idle(1), waittunnel(2), waitreply(3), waitconn(4), established(5), waitnotify(6)  

accL2tpSessionLocalPort 1.3.6.1.4.1.5.1.1.71.1.5.1.19
Local interface that this tunnel has connected to
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpSessionStatusTable 1.3.6.1.4.1.5.1.1.71.1.6
Displays all L2TP Tunnel entries configured on the system
OBJECT-TYPE    
  SEQUENCE OF  
    AccL2tpSessionStatusEntry

accL2tpSessionStatusEntry 1.3.6.1.4.1.5.1.1.71.1.6.1
Tok_String
OBJECT-TYPE    
  AccL2tpSessionStatusEntry  

accL2tpSessionStatusTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.6.1.1
Interface index for tunnel port
OBJECT-TYPE    
  INTEGER 0..4294967295  

accL2tpSessionStatusLocalCallId 1.3.6.1.4.1.5.1.1.71.1.6.1.2
Session Identifier used by Local Tunnel Endpoint for this session
OBJECT-TYPE    
  INTEGER 1..65535  

accL2tpSessionStatusInDiscards 1.3.6.1.4.1.5.1.1.71.1.6.1.3
Number of Payload packets discarded because transmit queue was full
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusTxSequenceResets 1.3.6.1.4.1.5.1.1.71.1.6.1.4
Shows the number of packets that were sent with the Reset bit (R-bit) set.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusCalcRWS 1.3.6.1.4.1.5.1.1.71.1.6.1.5
Calculated Remote RWS
OBJECT-TYPE    
  Gauge  

accL2tpSessionStatusTxQueueLength 1.3.6.1.4.1.5.1.1.71.1.6.1.6
Queue Length
OBJECT-TYPE    
  Gauge  

accL2tpSessionStatusNextSendSeq 1.3.6.1.4.1.5.1.1.71.1.6.1.7
Shows the number of sequenced packets sent from this RAC at the time the display command was performed. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
OBJECT-TYPE    
  INTEGER  

accL2tpSessionStatusNextSendSeqAck 1.3.6.1.4.1.5.1.1.71.1.6.1.8
Shows the number of sequenced packets sent from this RAC that have been acknowledged by the remote peer since the tunnel was established. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
OBJECT-TYPE    
  INTEGER  

accL2tpSessionStatusNextRecvSeq 1.3.6.1.4.1.5.1.1.71.1.6.1.9
Shows the number of sequenced packets that this RAC has received and acknowledged back to its tunnel peer since the tunnel was established. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
OBJECT-TYPE    
  INTEGER  

accL2tpSessionStatusNextRecvSeqAck 1.3.6.1.4.1.5.1.1.71.1.6.1.10
Shows the number of sequenced packets received by this RAC that have been acknowledged to the remote peer since the tunnel was established. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
OBJECT-TYPE    
  INTEGER  

accL2tpSessionStatusOutOfSeqs 1.3.6.1.4.1.5.1.1.71.1.6.1.11
Shows the number of payload packets waiting in the out-of-sequence queue. Packets in this queue are waiting for the delivery of packets that may be delayed in the network.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusOutOfSeqQLen 1.3.6.1.4.1.5.1.1.71.1.6.1.12
Shows the number of payload packets waiting in the out-of-sequence queue. Packets in this queue are waiting for the delivery of packets that may be delayed in the network.
OBJECT-TYPE    
  Gauge  

accL2tpSessionStatusTxOctets 1.3.6.1.4.1.5.1.1.71.1.6.1.13
The number of octets that are being transmitted.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusTxPackets 1.3.6.1.4.1.5.1.1.71.1.6.1.14
The number of packets that are being transmitted.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusRxOctets 1.3.6.1.4.1.5.1.1.71.1.6.1.15
The number of octets that are being received.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusRxPackets 1.3.6.1.4.1.5.1.1.71.1.6.1.16
The number of packets that are being received.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusOutDiscards 1.3.6.1.4.1.5.1.1.71.1.6.1.17
Shows the number of received packets that have been discarded during this session.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusOutOfWindows 1.3.6.1.4.1.5.1.1.71.1.6.1.18
The number of payload packets that were received outside of the offered sequence window size.
OBJECT-TYPE    
  Counter  

accL2tpSessionStatusRxSequenceResets 1.3.6.1.4.1.5.1.1.71.1.6.1.19
The number of payload packets that were received that had the R-bit set.
OBJECT-TYPE    
  INTEGER  

accL2tpEndpointDomainTable 1.3.6.1.4.1.5.1.1.71.1.7
Displays all L2TP Tunnel entries configured on the system
OBJECT-TYPE    
  SEQUENCE OF  
    AccL2tpEndpointDomainEntry

accL2tpEndpointDomainEntry 1.3.6.1.4.1.5.1.1.71.1.7.1
Tok_String
OBJECT-TYPE    
  AccL2tpEndpointDomainEntry  

accL2tpEndpointDomain 1.3.6.1.4.1.5.1.1.71.1.7.1.1
A domain typically consist of L2TP tunnel peers. Each of which can serve as an endpoint for a tunnel originating at the local router.
OBJECT-TYPE    
  DisplayString  

accL2tpEndpointDomainSecret 1.3.6.1.4.1.5.1.1.71.1.7.1.2
Shared password used by tunnel peers to authenticate each other.
OBJECT-TYPE    
  DisplayString  

accL2tpEndpointDomainNumberGroup 1.3.6.1.4.1.5.1.1.71.1.7.1.3
This object identifies the Called Number Group that is to be associated with this Endpoint Domain.
OBJECT-TYPE    
  INTEGER  

accL2tpEndpointDomainStatus 1.3.6.1.4.1.5.1.1.71.1.7.1.4
The current status of this entry.
OBJECT-TYPE    
  RowStatus  

accL2tpUdpServerPort 1.3.6.1.4.1.5.1.1.71.2.1.1.1
Default UDP Port number L2TP will connect to when passively waiting for incoming connections
OBJECT-TYPE    
  INTEGER 1..65535  

accL2tpUdpPayloadCksums 1.3.6.1.4.1.5.1.1.71.2.1.1.2
When set to YES, L2TP will inform UDP to checksum L2TP Payload messages. L2TP Control messages are always checksummed
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accL2tpUdpFixedAddress 1.3.6.1.4.1.5.1.1.71.2.1.1.3
Configures the default behavior of the transport driver to support multihomed or roaming endpoints.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accL2tpUdpSrcIpAddress 1.3.6.1.4.1.5.1.1.71.2.1.1.4
configures the L2TP UDP transport driver to assign the given address to all L2TP packets trans mitted. Configuring a fixed interface by assigning an IP address to all L2TP packets is done to improve L2TP performance; however, limiting this value to a single interface may cause the address to become unreachable if the network goes down.
OBJECT-TYPE    
  IpAddress  

accL2tpUdpStatsRsrcFails 1.3.6.1.4.1.5.1.1.71.2.1.1.5
Shows the number of times that a request for memory has failed.
OBJECT-TYPE    
  Counter  

accL2tpUdpStatsInDiscards 1.3.6.1.4.1.5.1.1.71.2.1.1.6
Shows the number of received L2TP packets that were discarded.
OBJECT-TYPE    
  Counter  

accL2tpUdpStatsUnknownTIDs 1.3.6.1.4.1.5.1.1.71.2.1.1.7
Shows the number of packets received from unknown tunnels.
OBJECT-TYPE    
  Counter  

accL2tpUdpTransportTable 1.3.6.1.4.1.5.1.1.71.2.1.2
Displays all L2TP Tunnel entries configured on the system
OBJECT-TYPE    
  SEQUENCE OF  
    AccL2tpUdpTransportEntry

accL2tpUdpTransportEntry 1.3.6.1.4.1.5.1.1.71.2.1.2.1
Tok_String
OBJECT-TYPE    
  AccL2tpUdpTransportEntry  

accL2tpUdpTransportTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.2.1.2.1.1
Interface index for tunnel port
OBJECT-TYPE    
  INTEGER 0..4294967295  

accL2tpUdpTransportEndpointIpAddress 1.3.6.1.4.1.5.1.1.71.2.1.2.1.2
Tunnel Remote Endpoint Ip Address
OBJECT-TYPE    
  IpAddress  

accL2tpUdpTransportPort 1.3.6.1.4.1.5.1.1.71.2.1.2.1.3
Value of UDP Port that will be used when establishing a connection
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpUdpTransportPayloadCksum 1.3.6.1.4.1.5.1.1.71.2.1.2.1.4
When this is set to YES, UDP will calculate the Payload checksum
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accL2tpUdpTransportFixedAddress 1.3.6.1.4.1.5.1.1.71.2.1.2.1.5
Configures the L2tp UDP transport layer to support multihomed or roaming remote clients.Supporting multihomed remote clients enables the tunnel peer to change its IP address; this typically occurs if the remote client is multihomed or has a co-located LAC and roams out of a zone.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accL2tpUdpTransportStatus 1.3.6.1.4.1.5.1.1.71.2.1.2.1.6
The current status of this entry.
OBJECT-TYPE    
  RowStatus  

accL2tpUdpConnectionTable 1.3.6.1.4.1.5.1.1.71.2.1.3
Displays all L2TP Tunnel entries configured on the system
OBJECT-TYPE    
  SEQUENCE OF  
    AccL2tpUdpConnectionEntry

accL2tpUdpConnectionEntry 1.3.6.1.4.1.5.1.1.71.2.1.3.1
Tok_String
OBJECT-TYPE    
  AccL2tpUdpConnectionEntry  

accL2tpUdpConnectionTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.2.1.3.1.1
Interface index for tunnel port
OBJECT-TYPE    
  INTEGER 0..4294967295  

accL2tpUdpConnectionEndpointIpAddress 1.3.6.1.4.1.5.1.1.71.2.1.3.1.2
Tunnel Remote Endpoint Ip Address
OBJECT-TYPE    
  IpAddress  

accL2tpUdpConnectionRxPort 1.3.6.1.4.1.5.1.1.71.2.1.3.1.3
Receive Port
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpUdpConnectionTxPort 1.3.6.1.4.1.5.1.1.71.2.1.3.1.4
Transmit Port
OBJECT-TYPE    
  INTEGER 0..65535  

accL2tpUdpConnectionAddressChanges 1.3.6.1.4.1.5.1.1.71.2.1.3.1.5
Number of times User changed his Ip Address
OBJECT-TYPE    
  Counter  

accL2tpTraps 1.3.6.1.4.1.5.1.1.71.2.1.4
OBJECT IDENTIFIER    

accL2tpTrapMsg 1.3.6.1.4.1.5.1.1.71.2.1.4.1
Enterprise Trap Message for L2tp
OBJECT-TYPE    
  DisplayString  

accL2tpTunnelDelTrap 1
When L2TP resources associated with a tunnel port are released and removing any references, if any sessions are left., delete action fails. This trap message carries this information. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accL2tpTrap2 2
While searching the UDP endpoint database to see if the EP exists., transport entry can exist without l2tp tunnel ports and so tries to create one and generates this trap if this creation fails. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accL2tpUdpEpTrap 3
In the ad hoc L2tp testing, all the tunnels are created and brought up. In the process if the L25 UDP end point is not found, then this trap is generated. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accL2tpUdpEpCreateTrap 4
In the ad hoc L2tp testing, all the tunnels are created and brought up. In the process if the creation of end point fails then this trap is generated SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accL2tpTunnelCreateTrap 5
In the ad hoc L2tp testing, all the tunnels are created and brought up. In the process if the creation of a tunnel fails then this trap is generated SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accL2tpInvIntfAddrTrap 6
This trap message indicates that the IP address specified in the 'set L2TP UDP source IP address' is invalid. An address associated with one of the IP network entries must be specified. In the process of Updating the L2tp MIB structure if the invalid interface is referenced with the UDP, this trap is generated SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accL2tpTunnelAbortCleanUpTrap 7
While doing the tunnel clean up if the tunnel state is not Idle then this trap indicating the abort on tunnel clean up is generated SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accL2tpTrap8 8
SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accL2tpUdpServTrap 9
During Demultiplexing, If the appropriate tunnel is not found, attempt is made to establish a new tunnel. In such a situation, if the promiscous server is not enabled then this trap is generated indicating the same SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accL2tpTrap10 10
During Demultiplexing, If the appropriate tunnel is not found, attempt is made to establish a new tunnel. In such a situation, if the udpt creation fails, then this trap is generated indicating the same. and increments the failure count SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE