ACC-COMPRESS

File: ACC-COMPRESS.mib (40195 bytes)

Imported modules

RFC1155-SMI ACC-SYSTEM ACC-MIB
SNMPv2-TC

Imported symbols

OBJECT-TYPE Counter Gauge
accTrapLogSeqNum accBRG DisplayString
IfIndex SmdsAddress RowStatus

Defined Types

AccCompressDialNeighborEntry  
SEQUENCE    
  accCompressDialNeighborIfIndex INTEGER
  accCompressDialNeighborCallAddress DisplayString
  accCompressDialNeighborStatus INTEGER

AccCompressFfrNeighborEntry  
SEQUENCE    
  accCompressFfrNeighborIfIndex INTEGER
  accCompressFfrNeighborDlci INTEGER
  accCompressFfrNeighborStatus INTEGER

AccCompressX25NeighborEntry  
SEQUENCE    
  accCompressX25NeighborIfIndex INTEGER
  accCompressX25NeighborAddress DisplayString
  accCompressX25NeighborStatus INTEGER

AccCompressDialStatEntry  
SEQUENCE    
  accCompressDialStatIfIndex INTEGER
  accCompressDialStatCallAddress OCTET STRING
  accCompressDialStatStatus INTEGER
  accCompressDialStatOctetsIns Counter
  accCompressDialStatOctetsOuts Counter
  accCompressDialStatPacketsIns Counter
  accCompressDialStatPacketsOuts Counter
  accCompressDialStatUnCompIns Counter
  accCompressDialStatUnCompOuts Counter
  accCompressDialStatAvgCompIn Gauge
  accCompressDialStatAvgCompOut Gauge
  accCompressDialStatHdrErrors Counter
  accCompressDialStatResyncs Counter
  accCompressDialStatNoEndMarks Counter
  accCompressDialStatNoBufAvails Counter

AccCompressFfrStatEntry  
SEQUENCE    
  accCompressFfrStatIfIndex INTEGER
  accCompressFfrStatDlci INTEGER
  accCompressFfrStatStatus INTEGER
  accCompressFfrStatOctetsIns Counter
  accCompressFfrStatOctetsOuts Counter
  accCompressFfrStatPacketsIns Counter
  accCompressFfrStatPacketsOuts Counter
  accCompressFfrStatUnCompIns Counter
  accCompressFfrStatUnCompOuts Counter
  accCompressFfrStatAvgCompIn Gauge
  accCompressFfrStatAvgCompOut Gauge
  accCompressFfrStatHdrErrors Counter
  accCompressFfrStatResyncs Counter
  accCompressFfrStatNoEndMarks Counter
  accCompressFfrStatNoBufAvails Counter

AccCompressX25StatEntry  
SEQUENCE    
  accCompressX25StatIfIndex INTEGER
  accCompressX25StatAddress OCTET STRING
  accCompressX25StatStatus INTEGER
  accCompressX25StatOctetsIns Counter
  accCompressX25StatOctetsOuts Counter
  accCompressX25StatPacketsIns Counter
  accCompressX25StatPacketsOuts Counter
  accCompressX25StatUnCompIns Counter
  accCompressX25StatUnCompOuts Counter
  accCompressX25StatAvgCompIn Gauge
  accCompressX25StatAvgCompOut Gauge
  accCompressX25StatHdrErrors Counter
  accCompressX25StatResyncs Counter
  accCompressX25StatNoEndMarks Counter
  accCompressX25StatNoBufAvails Counter

AccCompressPhysStatEntry  
SEQUENCE    
  accCompressPhysStatIfIndex INTEGER
  accCompressPhysStatStatus INTEGER
  accCompressPhysStatOctetsIns Counter
  accCompressPhysStatOctetsOuts Counter
  accCompressPhysStatPacketsIns Counter
  accCompressPhysStatPacketsOuts Counter
  accCompressPhysStatUnCompIns Counter
  accCompressPhysStatUnCompOuts Counter
  accCompressPhysStatAvgCompIn Gauge
  accCompressPhysStatAvgCompOut Gauge
  accCompressPhysStatHdrErrors Counter
  accCompressPhysStatResyncs Counter
  accCompressPhysStatNoEndMarks Counter
  accCompressPhysStatNoBufAvails Counter
  accCompressPhysStatusInStats INTEGER
  accCompressPhysStatusOutStats INTEGER
  accCompressPhysExpandInStats Counter
  accCompressPhysExpandOutStats Counter
  accCompressPhysDiscardInStats Counter
  accCompressPhysDiscardOutStats Counter

AccCompressSmdsNeighborEntry  
SEQUENCE    
  accCompressSmdsNeighborIfIndex INTEGER
  accCompressSmdsNeighborSNI SmdsAddress
  accCompressSmdsNeighborStatus INTEGER
  accCompressSmdsNeighborRowStatus RowStatus

AccCompressSmdsStatEntry  
SEQUENCE    
  accCompressSmdsStatIfIndex INTEGER
  accCompressSmdsStatSNI SmdsAddress
  accCompressSmdsStatStatus INTEGER
  accCompressSmdsStatOctetsIns Counter
  accCompressSmdsStatOctetsOuts Counter
  accCompressSmdsStatPacketsIns Counter
  accCompressSmdsStatPacketsOuts Counter
  accCompressSmdsStatUnCompIns Counter
  accCompressSmdsStatUnCompOuts Counter
  accCompressSmdsStatAvgCompIn Gauge
  accCompressSmdsStatAvgCompOut Gauge
  accCompressSmdsStatHdrErrors Counter
  accCompressSmdsStatResyncs Counter
  accCompressSmdsStatNoEndMarks Counter
  accCompressSmdsStatNoBufAvails Counter

Defined Values

accCompress 1.3.6.1.4.1.5.1.1.6
OBJECT IDENTIFIER    

accCompressDialNeighborTable 1.3.6.1.4.1.5.1.1.6.1
Data compression neighbor exception table for dial ports containing data compression parameters for selected neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressDialNeighborEntry

accCompressDialNeighborEntry 1.3.6.1.4.1.5.1.1.6.1.1
Data compression neighbor exception table entry containing data compression parameters for a particular dial port neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressDialNeighborEntry  

accCompressDialNeighborIfIndex 1.3.6.1.4.1.5.1.1.6.1.1.1
The ifindex of the dial port via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressDialNeighborCallAddress 1.3.6.1.4.1.5.1.1.6.1.1.2
The call address of the neighbor to which the dial port is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

accCompressDialNeighborStatus 1.3.6.1.4.1.5.1.1.6.1.1.3
The administrative status of data compression for this dial neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), invalid(128)  

accCompressFfrNeighborTable 1.3.6.1.4.1.5.1.1.6.2
Data compression neighbor exception table for frame relay circuits containing data compression parameters for selected neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressFfrNeighborEntry

accCompressFfrNeighborEntry 1.3.6.1.4.1.5.1.1.6.2.1
Data compression neighbor exception table entry containing data compression parameters for a particular frame relay neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressFfrNeighborEntry  

accCompressFfrNeighborIfIndex 1.3.6.1.4.1.5.1.1.6.2.1.1
The physical port index via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressFfrNeighborDlci 1.3.6.1.4.1.5.1.1.6.2.1.2
A unique identifier for the neighbor. In this case it is the local DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressFfrNeighborStatus 1.3.6.1.4.1.5.1.1.6.2.1.3
The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2), invalid(128)  

accCompressX25NeighborTable 1.3.6.1.4.1.5.1.1.6.3
Data compression neighbor exception table for X25 circuits containing data compression parameters for selected neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressX25NeighborEntry

accCompressX25NeighborEntry 1.3.6.1.4.1.5.1.1.6.3.1
Data compression neighbor exception table entry containing data compression parameters for a particular X.25 neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressX25NeighborEntry  

accCompressX25NeighborIfIndex 1.3.6.1.4.1.5.1.1.6.3.1.1
The physical port index via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressX25NeighborAddress 1.3.6.1.4.1.5.1.1.6.3.1.2
A unique identifier for the neighbor. This is the neighbor's DTE address
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

accCompressX25NeighborStatus 1.3.6.1.4.1.5.1.1.6.3.1.3
The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2), invalid(128)  

accCompressDialStatTable 1.3.6.1.4.1.5.1.1.6.4
Data compression statistics table for dial ports containing data compression statistics for all active dial port neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressDialStatEntry

accCompressDialStatEntry 1.3.6.1.4.1.5.1.1.6.4.1
Data compression dial port statistics table entry containing data compression statistics for a particular dial port neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressDialStatEntry  

accCompressDialStatIfIndex 1.3.6.1.4.1.5.1.1.6.4.1.1
The interface index of the dial port via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressDialStatCallAddress 1.3.6.1.4.1.5.1.1.6.4.1.2
The call address of the neighbor to which the dial port is currently connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accCompressDialStatStatus 1.3.6.1.4.1.5.1.1.6.4.1.3
The operational status of the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), conn(2), sync(3), resync(4)  

accCompressDialStatOctetsIns 1.3.6.1.4.1.5.1.1.6.4.1.4
The total number of compressed octets presented for decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatOctetsOuts 1.3.6.1.4.1.5.1.1.6.4.1.5
The total number of compressed octets generated after compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatPacketsIns 1.3.6.1.4.1.5.1.1.6.4.1.6
The total number of uncompressed packets generated by decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatPacketsOuts 1.3.6.1.4.1.5.1.1.6.4.1.7
The total number of uncompressed packets presented for compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatUnCompIns 1.3.6.1.4.1.5.1.1.6.4.1.8
The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatUnCompOuts 1.3.6.1.4.1.5.1.1.6.4.1.9
The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatAvgCompIn 1.3.6.1.4.1.5.1.1.6.4.1.10
The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressDialStatAvgCompOut 1.3.6.1.4.1.5.1.1.6.4.1.11
The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressDialStatHdrErrors 1.3.6.1.4.1.5.1.1.6.4.1.12
The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatResyncs 1.3.6.1.4.1.5.1.1.6.4.1.13
The number of resynchronizations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatNoEndMarks 1.3.6.1.4.1.5.1.1.6.4.1.14
The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressDialStatNoBufAvails 1.3.6.1.4.1.5.1.1.6.4.1.15
The number of times the neighbor was connected and no history buffer could be allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatTable 1.3.6.1.4.1.5.1.1.6.5
Data compression statistics table containing data compression statistics for all active frame relay neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressFfrStatEntry

accCompressFfrStatEntry 1.3.6.1.4.1.5.1.1.6.5.1
Data compression statistics table entry containing data compression statistics for a particular frame relay neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressFfrStatEntry  

accCompressFfrStatIfIndex 1.3.6.1.4.1.5.1.1.6.5.1.1
The physical port index of the port via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressFfrStatDlci 1.3.6.1.4.1.5.1.1.6.5.1.2
This is the local DLCI for the frame relay neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressFfrStatStatus 1.3.6.1.4.1.5.1.1.6.5.1.3
The operational status of the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), conn(2), sync(3), resync(4)  

accCompressFfrStatOctetsIns 1.3.6.1.4.1.5.1.1.6.5.1.4
The total number of compressed octets presented for decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatOctetsOuts 1.3.6.1.4.1.5.1.1.6.5.1.5
The total number of compressed octets generated after compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatPacketsIns 1.3.6.1.4.1.5.1.1.6.5.1.6
The total number of uncompressed packets generated by decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatPacketsOuts 1.3.6.1.4.1.5.1.1.6.5.1.7
The total number of uncompressed packets presented for compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatUnCompIns 1.3.6.1.4.1.5.1.1.6.5.1.8
The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatUnCompOuts 1.3.6.1.4.1.5.1.1.6.5.1.9
The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatAvgCompIn 1.3.6.1.4.1.5.1.1.6.5.1.10
The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressFfrStatAvgCompOut 1.3.6.1.4.1.5.1.1.6.5.1.11
The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressFfrStatHdrErrors 1.3.6.1.4.1.5.1.1.6.5.1.12
The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatResyncs 1.3.6.1.4.1.5.1.1.6.5.1.13
The number of resynchronizations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatNoEndMarks 1.3.6.1.4.1.5.1.1.6.5.1.14
The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressFfrStatNoBufAvails 1.3.6.1.4.1.5.1.1.6.5.1.15
The number of times the neighbor was connected and no history buffer could be allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatTable 1.3.6.1.4.1.5.1.1.6.6
Data compression statistics table containing data compression statistics for all active X.25 neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressX25StatEntry

accCompressX25StatEntry 1.3.6.1.4.1.5.1.1.6.6.1
Data compression statistics table entry containing data compression statistics for a particular X.25 neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressX25StatEntry  

accCompressX25StatIfIndex 1.3.6.1.4.1.5.1.1.6.6.1.1
The physical port index of the port via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressX25StatAddress 1.3.6.1.4.1.5.1.1.6.6.1.2
DTE address for the X.25 neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accCompressX25StatStatus 1.3.6.1.4.1.5.1.1.6.6.1.3
The operational status of the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), conn(2), sync(3), resync(4)  

accCompressX25StatOctetsIns 1.3.6.1.4.1.5.1.1.6.6.1.4
The total number of compressed octets presented for decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatOctetsOuts 1.3.6.1.4.1.5.1.1.6.6.1.5
The total number of compressed octets generated after compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatPacketsIns 1.3.6.1.4.1.5.1.1.6.6.1.6
The total number of uncompressed packets generated by decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatPacketsOuts 1.3.6.1.4.1.5.1.1.6.6.1.7
The total number of uncompressed packets presented for compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatUnCompIns 1.3.6.1.4.1.5.1.1.6.6.1.8
The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatUnCompOuts 1.3.6.1.4.1.5.1.1.6.6.1.9
The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatAvgCompIn 1.3.6.1.4.1.5.1.1.6.6.1.10
The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressX25StatAvgCompOut 1.3.6.1.4.1.5.1.1.6.6.1.11
The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressX25StatHdrErrors 1.3.6.1.4.1.5.1.1.6.6.1.12
The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatResyncs 1.3.6.1.4.1.5.1.1.6.6.1.13
The number of resynchronizations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatNoEndMarks 1.3.6.1.4.1.5.1.1.6.6.1.14
The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressX25StatNoBufAvails 1.3.6.1.4.1.5.1.1.6.6.1.15
The number of times the neighbor was connected and no history buffer could be allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatTable 1.3.6.1.4.1.5.1.1.6.7
Data compression statistics table for physical ports containing aggregate data compression statistics for all active and inactive neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressPhysStatEntry

accCompressPhysStatEntry 1.3.6.1.4.1.5.1.1.6.7.1
Data compression statistics table entry containing aggregate data compression statistics for all neighbors through a particular physical port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressPhysStatEntry  

accCompressPhysStatIfIndex 1.3.6.1.4.1.5.1.1.6.7.1.1
The index of the physical port via which the neighbor(s) is(are) accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressPhysStatStatus 1.3.6.1.4.1.5.1.1.6.7.1.2
The operational status of the neighbor. For X.25 and Frame Relay ports, as there can be more than one neighbor, this is the superior status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), conn(2), sync(3), resync(4)  

accCompressPhysStatOctetsIns 1.3.6.1.4.1.5.1.1.6.7.1.3
The total number of compressed octets presented for decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatOctetsOuts 1.3.6.1.4.1.5.1.1.6.7.1.4
The total number of compressed octets generated after compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatPacketsIns 1.3.6.1.4.1.5.1.1.6.7.1.5
The total number of uncompressed packets generated by decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatPacketsOuts 1.3.6.1.4.1.5.1.1.6.7.1.6
The total number of uncompressed packets presented for compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatUnCompIns 1.3.6.1.4.1.5.1.1.6.7.1.7
The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatUnCompOuts 1.3.6.1.4.1.5.1.1.6.7.1.8
The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatAvgCompIn 1.3.6.1.4.1.5.1.1.6.7.1.9
The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressPhysStatAvgCompOut 1.3.6.1.4.1.5.1.1.6.7.1.10
The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressPhysStatHdrErrors 1.3.6.1.4.1.5.1.1.6.7.1.11
The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatResyncs 1.3.6.1.4.1.5.1.1.6.7.1.12
The number of resynchronizations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatNoEndMarks 1.3.6.1.4.1.5.1.1.6.7.1.13
The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatNoBufAvails 1.3.6.1.4.1.5.1.1.6.7.1.14
The number of times the neighbor was connected and no history buffer could be allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysStatusInStats 1.3.6.1.4.1.5.1.1.6.7.1.15
The current status of the incoming packet port compression connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), conn(2), sync(3), resync(4)  

accCompressPhysStatusOutStats 1.3.6.1.4.1.5.1.1.6.7.1.16
The current status of the outgoing packet port compression connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), conn(2), sync(3), resync(4)  

accCompressPhysExpandInStats 1.3.6.1.4.1.5.1.1.6.7.1.17
The number of incoming packets that have been uncompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysExpandOutStats 1.3.6.1.4.1.5.1.1.6.7.1.18
The number of outgoing packets that have been uncompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysDiscardInStats 1.3.6.1.4.1.5.1.1.6.7.1.19
The number of incoming packets that have been discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressPhysDiscardOutStats 1.3.6.1.4.1.5.1.1.6.7.1.20
The number outgoing packets that have been discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsNeighborTable 1.3.6.1.4.1.5.1.1.6.8
Data compression neighbor table for Smds connections containing data compression parameters for selected neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressSmdsNeighborEntry

accCompressSmdsNeighborEntry 1.3.6.1.4.1.5.1.1.6.8.1
Data compression neighbor table entry containing data compression parameters for a particular Smds neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressSmdsNeighborEntry  

accCompressSmdsNeighborIfIndex 1.3.6.1.4.1.5.1.1.6.8.1.1
The physical port index via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressSmdsNeighborSNI 1.3.6.1.4.1.5.1.1.6.8.1.2
A unique identifier for the neighbor. In this case it is the remote SNI address. This is the unicast Subscriber Network Interface address of the remote side in E.164 address format (e.g., 0xC18005551212FFFF)
Status: mandatory Access: read-only
OBJECT-TYPE    
  SmdsAddress  

accCompressSmdsNeighborStatus 1.3.6.1.4.1.5.1.1.6.8.1.3
The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2), invalid(128)  

accCompressSmdsNeighborRowStatus 1.3.6.1.4.1.5.1.1.6.8.1.4
The current status of this neighbor entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

accCompressSmdsStatTable 1.3.6.1.4.1.5.1.1.6.9
Data compression statistics table containing data compression statistics for all active Smds neighbors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccCompressSmdsStatEntry

accCompressSmdsStatEntry 1.3.6.1.4.1.5.1.1.6.9.1
Data compression statistics table entry containing data compression statistics for a particular Smds neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccCompressSmdsStatEntry  

accCompressSmdsStatIfIndex 1.3.6.1.4.1.5.1.1.6.9.1.1
The physical port index of the port via which the neighbor is accessed or connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accCompressSmdsStatSNI 1.3.6.1.4.1.5.1.1.6.9.1.2
A unique identifier for the neighbor. In this case it is the remote SNI address. This is the unicast Subscriber Network Interface address of the remote side in E.164 address format (e.g., 0xC18005551212FFFF)
Status: mandatory Access: read-write
OBJECT-TYPE    
  SmdsAddress  

accCompressSmdsStatStatus 1.3.6.1.4.1.5.1.1.6.9.1.3
The operational status of the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), conn(2), sync(3), resync(4)  

accCompressSmdsStatOctetsIns 1.3.6.1.4.1.5.1.1.6.9.1.4
The total number of compressed octets presented for decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatOctetsOuts 1.3.6.1.4.1.5.1.1.6.9.1.5
The total number of compressed octets generated after compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatPacketsIns 1.3.6.1.4.1.5.1.1.6.9.1.6
The total number of uncompressed packets generated by decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatPacketsOuts 1.3.6.1.4.1.5.1.1.6.9.1.7
The total number of uncompressed packets presented for compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatUnCompIns 1.3.6.1.4.1.5.1.1.6.9.1.8
The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatUnCompOuts 1.3.6.1.4.1.5.1.1.6.9.1.9
The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatAvgCompIn 1.3.6.1.4.1.5.1.1.6.9.1.10
The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressSmdsStatAvgCompOut 1.3.6.1.4.1.5.1.1.6.9.1.11
The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accCompressSmdsStatHdrErrors 1.3.6.1.4.1.5.1.1.6.9.1.12
The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatResyncs 1.3.6.1.4.1.5.1.1.6.9.1.13
The number of resynchronizations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatNoEndMarks 1.3.6.1.4.1.5.1.1.6.9.1.14
The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accCompressSmdsStatNoBufAvails 1.3.6.1.4.1.5.1.1.6.9.1.15
The number of times the neighbor was connected and no history buffer could be allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter