ACC-BGP

File: ACC-BGP.mib (41172 bytes)

Imported modules

RFC1155-SMI RFC-1215 BGP4-MIB
ACC-SYSTEM ACC-MIB SNMPv2-TC

Imported symbols

OBJECT-TYPE IpAddress TRAP-TYPE
bgpLocalAs bgpPeerLocalAddr bgpPeerRemoteAddr
accTrapLogSeqNum accBRG DisplayString
IfIndex SmdsAddress bgpPeerState
bgpPeerHoldTimeConfigured bgpPeerKeepAliveConfigured RowStatus

Defined Types

AccBgpPeerEntry  
SEQUENCE    
  accBgpPeerAddress IpAddress
  accBgpPeerVersionConfigured INTEGER
  accBgpPeerDefaultImportPref INTEGER
  accBgpPeerDefaultExportMetric INTEGER
  accBgpPeerPassive INTEGER
  accBgpPeerUseMed INTEGER
  accBgpPeerMessageLevel INTEGER
  accBgpPeerMultiHop INTEGER
  accBgpPeerStatus RowStatus

AccBgpImportEntry  
SEQUENCE    
  accBgpImportNetwork IpAddress
  accBgpImportMask IpAddress
  accBgpImportPeerAS INTEGER
  accBgpImportPeerAddress IpAddress
  accBgpImportHomeAS INTEGER
  accBgpImportOrigin INTEGER
  accBgpImportPreference INTEGER
  accBgpImportAction INTEGER
  accBgpImportStatus RowStatus

AccBgpASWeightEntry  
SEQUENCE    
  accBgpASWeightAS INTEGER
  accBgpASWeight INTEGER
  accBgpASWeightStatus RowStatus

AccBgpAggregateEntry  
SEQUENCE    
  accBgpAggregateAddr IpAddress
  accBgpAggregateMask IpAddress
  accBgpAggregateAdvertise INTEGER
  accBgpAggregatePref INTEGER
  accBgpAggregateComponents INTEGER
  accBgpAggregateActive INTEGER
  accBgpAggregateAdminStat INTEGER
  accBgpAggregateStatus RowStatus

AccBgpAggrComponentEntry  
SEQUENCE    
  accBgpAggrCompParentAddr IpAddress
  accBgpAggrCompParentMask IpAddress
  accBgpAggrComponentAddr IpAddress
  accBgpAggrComponentMask IpAddress
  accBgpAggrComponentProtocol INTEGER
  accBgpAggrComponentActive INTEGER
  accBgpAggrComponentStatus RowStatus

AccBgpExportEntry  
SEQUENCE    
  accBgpExportPeerAS INTEGER
  accBgpExportPeerAddress IpAddress
  accBgpExportProtocol INTEGER
  accBgpExportSpecific2 INTEGER
  accBgpExportSpecific1 INTEGER
  accBgpExportNetwork IpAddress
  accBgpExportMask IpAddress
  accBgpExportAction INTEGER
  accBgpExportMetric INTEGER
  accBgpExportStatus RowStatus

Defined Values

accBgp 1.3.6.1.4.1.5.1.1.51
OBJECT IDENTIFIER    

accBgpGeneral 1.3.6.1.4.1.5.1.1.51.1
OBJECT IDENTIFIER    

accBgpAdminState 1.3.6.1.4.1.5.1.1.51.1.1
The administrative state of BGP.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accBgpMessageLevel 1.3.6.1.4.1.5.1.1.51.1.2
The diagnostic and message level setting. A higher value generates more detailed diagnostic feedback.
OBJECT-TYPE    
  INTEGER 1..7  

accBgpLocalAsFullMesh 1.3.6.1.4.1.5.1.1.51.1.3
Configures the local AS to a full mesh.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accBgpPeerTable 1.3.6.1.4.1.5.1.1.51.2
Extensions to the bgpPeerTable defined in rfc1657.
OBJECT-TYPE    
  SEQUENCE OF  
    AccBgpPeerEntry

accBgpPeerEntry 1.3.6.1.4.1.5.1.1.51.2.1
Tok_String
OBJECT-TYPE    
  AccBgpPeerEntry  

accBgpPeerAddress 1.3.6.1.4.1.5.1.1.51.2.1.1
The remote IP address of this entry's BGP peer.
OBJECT-TYPE    
  IpAddress  

accBgpPeerVersionConfigured 1.3.6.1.4.1.5.1.1.51.2.1.2
The configured version of this entry's BGP peer.
OBJECT-TYPE    
  INTEGER bgp3(3), bgp4(4)  

accBgpPeerDefaultImportPref 1.3.6.1.4.1.5.1.1.51.2.1.3
The default import preference for this entry's BGP peer.
OBJECT-TYPE    
  INTEGER 1..255  

accBgpPeerDefaultExportMetric 1.3.6.1.4.1.5.1.1.51.2.1.4
The default export metric for this entry's BGP peer. This value is used as the MED when no other specific policy is configured.
OBJECT-TYPE    
  INTEGER 1..4294967295  

accBgpPeerPassive 1.3.6.1.4.1.5.1.1.51.2.1.5
Determines whether or not the local BGP entity will initiate a peer relationship with this BGP peer.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accBgpPeerUseMed 1.3.6.1.4.1.5.1.1.51.2.1.6
Determines if this local BGP entity will include the MED path attributes in announcements to this BGP peer.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accBgpPeerMessageLevel 1.3.6.1.4.1.5.1.1.51.2.1.7
The configured diagnostic level for this BGP peer. Setting this value to 1 will enable the interface to generate critical diagnostic information. Increasing the value increases the diagnostic information. Level 7 is mostly informational.
OBJECT-TYPE    
  INTEGER 1..7  

accBgpPeerMultiHop 1.3.6.1.4.1.5.1.1.51.2.1.8
Configures this BGP peer to be more than one hop away. Used for external BGP peers only.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accBgpPeerStatus 1.3.6.1.4.1.5.1.1.51.2.1.9
The current status of this protocol entry.
OBJECT-TYPE    
  RowStatus  

accBgpImportTable 1.3.6.1.4.1.5.1.1.51.4
This table lists the import policies used by this BGP application. Import policies determine what NLRI from BGP peer announcements that will be accepted and added to the local forwarding table.
OBJECT-TYPE    
  SEQUENCE OF  
    AccBgpImportEntry

accBgpImportEntry 1.3.6.1.4.1.5.1.1.51.4.1
OBJECT-TYPE    
  AccBgpImportEntry  

accBgpImportNetwork 1.3.6.1.4.1.5.1.1.51.4.1.1
The import policies NLRI prefix.
OBJECT-TYPE    
  IpAddress  

accBgpImportMask 1.3.6.1.4.1.5.1.1.51.4.1.2
The mask to be used against BGP peer announcements NLRI and compared to this policies network object value.
OBJECT-TYPE    
  IpAddress  

accBgpImportPeerAS 1.3.6.1.4.1.5.1.1.51.4.1.3
The BGP peer's AS.
OBJECT-TYPE    
  INTEGER  

accBgpImportPeerAddress 1.3.6.1.4.1.5.1.1.51.4.1.4
The BGP peer's IP address.
OBJECT-TYPE    
  IpAddress  

accBgpImportHomeAS 1.3.6.1.4.1.5.1.1.51.4.1.5
The home AS of the NLRI in the announcement
OBJECT-TYPE    
  INTEGER  

accBgpImportOrigin 1.3.6.1.4.1.5.1.1.51.4.1.6
The Origin code of the NLRI in the announcement.
OBJECT-TYPE    
  INTEGER igp(1), egp(2), unknown(3)  

accBgpImportAction 1.3.6.1.4.1.5.1.1.51.4.1.7
The action to be taken when a policy match is met.
OBJECT-TYPE    
  INTEGER import(1), ignore(2)  

accBgpImportPreference 1.3.6.1.4.1.5.1.1.51.4.1.8
The import preference to be assigned the NLRI when a policy match has been met.
OBJECT-TYPE    
  INTEGER 0..255  

accBgpImportStatus 1.3.6.1.4.1.5.1.1.51.4.1.9
The current status of this row entry.
OBJECT-TYPE    
  RowStatus  

accBgpASWeightTable 1.3.6.1.4.1.5.1.1.51.5
The AS weight table. This table indicates how the local BGP application is weighting Autonomous System during path selection.
OBJECT-TYPE    
  SEQUENCE OF  
    AccBgpASWeightEntry

accBgpASWeightEntry 1.3.6.1.4.1.5.1.1.51.5.1
OBJECT-TYPE    
  AccBgpASWeightEntry  

accBgpASWeightAS 1.3.6.1.4.1.5.1.1.51.5.1.1
The Autonomous System identifier.
OBJECT-TYPE    
  INTEGER 0..65535  

accBgpASWeight 1.3.6.1.4.1.5.1.1.51.5.1.2
The AS weight to be applied. A value of 255 is equivalent to infinity.
OBJECT-TYPE    
  INTEGER 0..255  

accBgpASWeightStatus 1.3.6.1.4.1.5.1.1.51.5.1.3
The current status of this entry.
OBJECT-TYPE    
  RowStatus  

accBgpAggregateTable 1.3.6.1.4.1.5.1.1.51.6
The BGP aggregation policy table. This table indicates what the local BGP application will attempt to aggregate.
OBJECT-TYPE    
  SEQUENCE OF  
    AccBgpAggregateEntry

accBgpAggregateEntry 1.3.6.1.4.1.5.1.1.51.6.1
OBJECT-TYPE    
  AccBgpAggregateEntry  

accBgpAggregateAddr 1.3.6.1.4.1.5.1.1.51.6.1.1
The aggregate address to be made active when a aggregate policy match is made.
OBJECT-TYPE    
  IpAddress  

accBgpAggregateMask 1.3.6.1.4.1.5.1.1.51.6.1.2
The mask to be included with the aggregate address when a aggregate policy match is made.
OBJECT-TYPE    
  IpAddress  

accBgpAggregateAdvertise 1.3.6.1.4.1.5.1.1.51.6.1.3
Determines whether or not the aggregate policy will be suppressed when a aggregate policy match is made.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accBgpAggregatePref 1.3.6.1.4.1.5.1.1.51.6.1.4
The preference of the aggregate policy when a policy match is made.
OBJECT-TYPE    
  INTEGER 0..255  

accBgpAggregateComponents 1.3.6.1.4.1.5.1.1.51.6.1.5
The number aggregate policy components that must be active before this aggregate policy is made active.
OBJECT-TYPE    
  INTEGER 0..10  

accBgpAggregateActive 1.3.6.1.4.1.5.1.1.51.6.1.6
Indicates whether this aggregate policy is currently active.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accBgpAggregateAdminStat 1.3.6.1.4.1.5.1.1.51.6.1.7
The administrative status of this aggregate policy.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accBgpAggregateStatus 1.3.6.1.4.1.5.1.1.51.6.1.8
The current status of this entry.
OBJECT-TYPE    
  RowStatus  

accBgpAggrComponentTable 1.3.6.1.4.1.5.1.1.51.7
The BGP applications aggregate policy component table.
OBJECT-TYPE    
  SEQUENCE OF  
    AccBgpAggrComponentEntry

accBgpAggrComponentEntry 1.3.6.1.4.1.5.1.1.51.7.1
OBJECT-TYPE    
  AccBgpAggrComponentEntry  

accBgpAggrCompParentAddr 1.3.6.1.4.1.5.1.1.51.7.1.1
The components aggregate policy parent address.
OBJECT-TYPE    
  IpAddress  

accBgpAggrCompParentMask 1.3.6.1.4.1.5.1.1.51.7.1.2
The components aggregate policy parent mask.
OBJECT-TYPE    
  IpAddress  

accBgpAggrComponentAddr 1.3.6.1.4.1.5.1.1.51.7.1.3
The components address.
OBJECT-TYPE    
  IpAddress  

accBgpAggrComponentMask 1.3.6.1.4.1.5.1.1.51.7.1.4
The components mask.
OBJECT-TYPE    
  IpAddress  

accBgpAggrComponentProtocol 1.3.6.1.4.1.5.1.1.51.7.1.5
The route's protocol owner that will cause this aggregate component to activate.
OBJECT-TYPE    
  INTEGER any(1), static(2), ospf(3), rip(4), bgp(5)  

accBgpAggrComponentActive 1.3.6.1.4.1.5.1.1.51.7.1.6
Indicates whether this aggregate component is currently active.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accBgpAggrComponentStatus 1.3.6.1.4.1.5.1.1.51.7.1.7
The current status of this entry.
OBJECT-TYPE    
  RowStatus  

accBgpExportTable 1.3.6.1.4.1.5.1.1.51.8
This table lists the export policies used by the local BGP routing application. Export policies determine what NLRI BGP will include in announcements to BGP peers.
OBJECT-TYPE    
  SEQUENCE OF  
    AccBgpExportEntry

accBgpExportEntry 1.3.6.1.4.1.5.1.1.51.8.1
OBJECT-TYPE    
  AccBgpExportEntry  

accBgpExportPeerAS 1.3.6.1.4.1.5.1.1.51.8.1.1
The BGP peer's AS identifier.
OBJECT-TYPE    
  INTEGER  

accBgpExportPeerAddress 1.3.6.1.4.1.5.1.1.51.8.1.2
The BGP peer's address.
OBJECT-TYPE    
  IpAddress  

accBgpExportProtocol 1.3.6.1.4.1.5.1.1.51.8.1.3
The protocol owner of the NLRI.
OBJECT-TYPE    
  INTEGER any(1), local(2), static(3), iospf(4), eospf(5), rip(6), ebgp(7), ibgp(8), aggr(9)  

accBgpExportSpecific2 1.3.6.1.4.1.5.1.1.51.8.1.4
The secondary protocol specific value for this export policy.
OBJECT-TYPE    
  INTEGER  

accBgpExportSpecific1 1.3.6.1.4.1.5.1.1.51.8.1.5
The protocol specific value for this export policy.
OBJECT-TYPE    
  INTEGER  

accBgpExportNetwork 1.3.6.1.4.1.5.1.1.51.8.1.6
The export policies NLRI prefix.
OBJECT-TYPE    
  IpAddress  

accBgpExportMask 1.3.6.1.4.1.5.1.1.51.8.1.7
The mask to be used against NLRI when performing a policy lookup. A match is considered met if the result is subsumable by the network object value.
OBJECT-TYPE    
  IpAddress  

accBgpExportAction 1.3.6.1.4.1.5.1.1.51.8.1.8
The action to be taken when a policy match is met.
OBJECT-TYPE    
  INTEGER export(1), block(2)  

accBgpExportMetric 1.3.6.1.4.1.5.1.1.51.8.1.9
The metric (or MED) to be included in announcements to BGP peer's when a policy match is met.
OBJECT-TYPE    
  INTEGER 0..4294967295  

accBgpExportStatus 1.3.6.1.4.1.5.1.1.51.8.1.10
The current status of this entry.
OBJECT-TYPE    
  RowStatus  

accBgpTraps 1.3.6.1.4.1.5.1.1.51.9
OBJECT IDENTIFIER    

accBgpTrapMsg 1.3.6.1.4.1.5.1.1.51.9.1
Enterprise Trap Message for Bgp.
OBJECT-TYPE    
  DisplayString