AC-SYSTEM-MIB

File: AC-SYSTEM-MIB.mib (222665 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI
SNMP-FRAMEWORK-MIB AUDIOCODES-TYPES-MIB INET-ADDRESS-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY TAddress
DisplayString DateAndTime TEXTUAL-CONVENTION
IpAddress Unsigned32 Integer32
enterprises RowStatus SnmpAdminString
audioCodes acRegistrations acGeneric
acProducts acBoardMibs InetAddress
InetAddressType

Defined Types

AcNetworkIPEntry  
SEQUENCE    
  acNetworkIPIndex INTEGER
  acNetworkIPIfIndex Unsigned32
  acNetworkIPLocalIPAddress IpAddress
  acNetworkIPLocalSubnetMask IpAddress
  acNetworkIPLocalDefGW IpAddress
  acNetworkIPAdminState INTEGER

AcSysInterfaceEntry  
SEQUENCE    
  acSysInterfaceIndex Unsigned32
  acSysInterfaceRowStatus RowStatus
  acSysInterfaceAction INTEGER
  acSysInterfaceActionRes INTEGER
  acSysInterfaceApplicationTypes INTEGER
  acSysInterfaceMode INTEGER
  acSysInterfaceIPAddress SnmpAdminString
  acSysInterfacePrefixLength Unsigned32
  acSysInterfaceGateway SnmpAdminString
  acSysInterfaceVlanID Unsigned32
  acSysInterfaceName SnmpAdminString

AcSysWEBACLEntry  
SEQUENCE    
  acSysWEBACLIndex Unsigned32
  acSysWEBACLIP IpAddress

AcSysWEBAccessEntry  
SEQUENCE    
  acSysWEBAccessRowStatus Unsigned32
  acSysWEBAccessAction Unsigned32
  acSysWEBAccessActionResult Unsigned32
  acSysWEBAccessIndex INTEGER
  acSysWEBAccessUserName SnmpAdminString
  acSysWEBAccessUserCode SnmpAdminString
  acSysWEBAccessWebAuthMode INTEGER

AcSysVlanMapEntry  
SEQUENCE    
  acSysVlanMapIndex Unsigned32
  acSysVlanMapRowStatus RowStatus
  acSysVlanMapAction INTEGER
  acSysVlanMapActionRes INTEGER
  acSysVlanMapDiffServ Unsigned32
  acSysVlanMapVlanPriority Unsigned32

AcSysIKEPolicyEntry  
SEQUENCE    
  acSysIKEPolicyIndex Unsigned32
  acSysIKEPolicyRowStatus RowStatus
  acSysIKEPolicyAction INTEGER
  acSysIKEPolicyActionRes INTEGER
  acSysIKEPolicyShardKey SnmpAdminString
  acSysIKEPolicyLifeInSeconds Unsigned32
  acSysIKEPolicyLifeInKB Unsigned32
  acSysIKEPolicyProposal0Encryption INTEGER
  acSysIKEPolicyProposal1Encryption INTEGER
  acSysIKEPolicyProposal2Encryption INTEGER
  acSysIKEPolicyProposal3Encryption INTEGER
  acSysIKEPolicyProposal0Authentication INTEGER
  acSysIKEPolicyProposal1Authentication INTEGER
  acSysIKEPolicyProposal2Authentication INTEGER
  acSysIKEPolicyProposal3Authentication INTEGER
  acSysIKEPolicyProposal0DHGroup INTEGER
  acSysIKEPolicyProposal1DHGroup INTEGER
  acSysIKEPolicyProposal2DHGroup INTEGER
  acSysIKEPolicyProposal3DHGroup INTEGER
  acSysIKEPolicyAuthenticationMethod INTEGER

AcSysIPSecSPDEntry  
SEQUENCE    
  acSysIPSecSPDIndex Unsigned32
  acSysIPSecSPDRowStatus RowStatus
  acSysIPSecSPDAction INTEGER
  acSysIPSecSPDActionRes INTEGER
  acSysIPSecSPDPolicyRemoteIPAddr SnmpAdminString
  acSysIPSecSPDPolicySrcPort Unsigned32
  acSysIPSecSPDPolicyDestPort Unsigned32
  acSysIPSecSPDPolicyProtocol Unsigned32
  acSysIPSecSPDKeyExchangeMethodIndex Unsigned32
  acSysIPSecSPDLifeInSeconds Unsigned32
  acSysIPSecSPDLifeInKB Unsigned32
  acSysIPSecSPDProposal0Encryption INTEGER
  acSysIPSecSPDProposal1Encryption INTEGER
  acSysIPSecSPDProposal2Encryption INTEGER
  acSysIPSecSPDProposal3Encryption INTEGER
  acSysIPSecSPDProposal0Authentication INTEGER
  acSysIPSecSPDProposal1Authentication INTEGER
  acSysIPSecSPDProposal2Authentication INTEGER
  acSysIPSecSPDProposal3Authentication INTEGER
  acSysIPSecSPDPolicyLocalIPAddrType INTEGER
  acSysIPSecSPDMode INTEGER
  acSysIPSecSPDPolicyRemoteTunnelIPAddress IpAddress
  acSysIPSecSPDPolicyLocalTunnelIPAddress IpAddress
  acSysIPSecSPDPolicyRemoteTunnelSubnetMask IpAddress

AcSysIPsecProposalEntry  
SEQUENCE    
  acSysIPsecProposalIndex Unsigned32
  acSysIPsecProposalRowStatus RowStatus
  acSysIPsecProposalAction INTEGER
  acSysIPsecProposalActionRes INTEGER
  acSysIPsecProposalEncryptionAlgorithm INTEGER
  acSysIPsecProposalAuthenticationAlgorithm INTEGER
  acSysIPsecProposalDiffieHellmanGroup INTEGER

AcSysIPsecSAEntry  
SEQUENCE    
  acSysIPsecSAIndex Unsigned32
  acSysIPsecSARowStatus RowStatus
  acSysIPsecSAAction Unsigned32
  acSysIPsecSAActionRes Unsigned32
  acSysIPsecSARemoteEndpointAddress SnmpAdminString
  acSysIPsecSAAuthenticationMethod INTEGER
  acSysIPsecSASharedKey SnmpAdminString
  acSysIPsecSASourcePort Unsigned32
  acSysIPsecSADestPort Unsigned32
  acSysIPsecSAProtocol Unsigned32
  acSysIPsecSAPhase1SaLifetimeInSec Unsigned32
  acSysIPsecSAPhase2SaLifetimeInSec Unsigned32
  acSysIPsecSAPhase2SaLifetimeInKB Unsigned32
  acSysIPsecSADPDmode INTEGER
  acSysIPsecSAIPsecMode INTEGER
  acSysIPsecSARemoteTunnelAddress SnmpAdminString
  acSysIPsecSARemoteSubnetIPAddress SnmpAdminString
  acSysIPsecSARemoteSubnetPrefixLength Unsigned32

AcSysAccessListEntry  
SEQUENCE    
  acSysAccessListIndex Unsigned32
  acSysAccessListRowStatus RowStatus
  acSysAccessListAction INTEGER
  acSysAccessListActionRes INTEGER
  acSysAccessListSourceIP SnmpAdminString
  acSysAccessListNetMask IpAddress
  acSysAccessListStartPort Unsigned32
  acSysAccessListEndPort Unsigned32
  acSysAccessListProtocol SnmpAdminString
  acSysAccessListPacketSize Unsigned32
  acSysAccessListByteRate Unsigned32
  acSysAccessListByteBurst Unsigned32
  acSysAccessListAllowType INTEGER
  acSysAccessListMatchCount Unsigned32

AcSysNFSEntry  
SEQUENCE    
  acSysNFSIndex Unsigned32
  acSysNFSRowStatus RowStatus
  acSysNFSAction INTEGER
  acSysNFSActionRes INTEGER
  acSysNFSHostOrIP SnmpAdminString
  acSysNFSRootPath SnmpAdminString
  acSysNFSNfsVersion INTEGER
  acSysNFSAuthType INTEGER
  acSysNFSUID Unsigned32
  acSysNFSGID Unsigned32
  acSysNFSVlanType INTEGER

AcSysEthernetStatusEntry  
SEQUENCE    
  acSysEthernetStatusIndex Unsigned32
  acSysEthernetStatusPortDuplexMode INTEGER
  acSysEthernetStatusPortSpeed INTEGER
  acSysEthernetStatusActivePortNumber INTEGER
  acSysEthernetStatusPortState INTEGER
  acSysEthernetStatusPowerOverEthernet INTEGER

AcSysInterfaceStatusEntry  
SEQUENCE    
  acSysInterfaceStatusEntryIndex Unsigned32
  acSysInterfaceStatusTypeIndex Unsigned32
  acSysInterfaceStatusApplicationTypes INTEGER
  acSysInterfaceStatusMode INTEGER
  acSysInterfaceStatusIPAddress SnmpAdminString
  acSysInterfaceStatusPrefixLength Unsigned32
  acSysInterfaceStatusGateway SnmpAdminString
  acSysInterfaceStatusVlanID Unsigned32
  acSysInterfaceStatusName SnmpAdminString

AcSysModuleEntry  
SEQUENCE    
  acSysModuleIndex Unsigned32
  acSysModuleGeographicalPosition Unsigned32
  acSysModuleType INTEGER
  acSysModulePresence INTEGER
  acSysModuleLicenseKeyList SnmpAdminString
  acSysModuleSerialNumber Integer32
  acSysModuleSWVersion SnmpAdminString
  acSysModuleOperationalState INTEGER
  acSysModuleHAStatus INTEGER
  acSysModuleLEDs OCTET STRING
  acSysModuleTemperature Integer32
  acSysModuleActions INTEGER
  acSysModuleFRUaction INTEGER
  acSysModuleFRUstatus INTEGER
  acSysModuleNumOfPorts Unsigned32
  acSysModuleFirstPortNum Unsigned32

AcSysFanTrayEntry  
SEQUENCE    
  acSysFanTrayIndex Unsigned32
  acSysFanTrayGeographicalPosition Unsigned32
  acSysFanTrayExistence INTEGER
  acSysFanTrayType SnmpAdminString
  acSysFanTrayLEDs OCTET STRING
  acSysFanTraySeverity INTEGER
  acSysFanTrayFansConfiguredSpeed OCTET STRING
  acSysFanTrayFansCurrentSpeed OCTET STRING
  acSysFanTrayFansStatus OCTET STRING

AcSysPowerSupplyEntry  
SEQUENCE    
  acSysPowerSupplyIndex Unsigned32
  acSysPowerSupplyGeographicalPosition Unsigned32
  acSysPowerSupplyExistence INTEGER
  acSysPowerSupplyHwversion SnmpAdminString
  acSysPowerSupplyLEDs OCTET STRING
  acSysPowerSupplySeverity INTEGER

AcSysPEMEntry  
SEQUENCE    
  acSysPEMIndex Unsigned32
  acSysPEMGeographicalPosition Unsigned32
  acSysPEMExistence INTEGER
  acSysPEMType SnmpAdminString
  acSysPEMElectricWireConnection INTEGER

AcSysSATEntry  
SEQUENCE    
  acSysSATSatIndex Unsigned32
  acSysSATGeographicalPosition Unsigned32
  acSysSATType SnmpAdminString
  acSysSATInitInformation INTEGER
  acSysSATTimingUnitExistence INTEGER
  acSysSATTimingRefSelection INTEGER

AcSysSATFramersEntry  
SEQUENCE    
  acSysSATFramersSatIndex Unsigned32
  acSysSATFramersFramerIndex Unsigned32
  acSysSATFramersFramerInterfaceStatus INTEGER
  acSysSATFramersFramerLoopBackRef INTEGER
  acSysSATFramersFramerInterfaceType INTEGER
  acSysSATFramersFramerTransmitControl INTEGER
  acSysSATFramersRxStatus INTEGER
  acSysSATFramersIsUsedAsPLLClock INTEGER

AcSysPLLStatusEntry  
SEQUENCE    
  acSysPLLStatusIndex Unsigned32
  acSysPLLStatusOperatingMode INTEGER

Defined Values

acSystem 1.3.6.1.4.1.5003.9.10.10
Tok_String
MODULE-IDENTITY    

acSystemConfiguration 1.3.6.1.4.1.5003.9.10.10.1
OBJECT IDENTIFIER    

acSysControl 1.3.6.1.4.1.5003.9.10.10.1.1
OBJECT IDENTIFIER    

acSysControlProtocolType 1.3.6.1.4.1.5003.9.10.10.1.1.1
Defines the control protocol type. Choose either: 0 = None 1 = MGCP 2 = MEGACO 4 = H.323 8 = SIP. Access: Offline. AC INI-Param: MGCONTROLPROTOCOLTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER controlProtocol-None(0), controlProtocol-MGCP(1), controlProtocol-MEGACO(2), controlProtocol-H323(4), controlProtocol-SIP(8)  

acSysControlTrunkingToAnalogFunctionalityProfile 1.3.6.1.4.1.5003.9.10.10.1.1.2
This parameter defines the Trunking to Analog Functionality Profile. 0 = Disable 1 = Enable MelCAS/LoopStart/GroundStart to Analog Functionality Refer to the enumerator acTrunkingToAnalogFunctionalityProfile enum for the possible values. Access: Offline. AC INI-Param: TrunkingToAnalogFunctionalityProfile
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), cASAnalog(1)  

acSysTDM 1.3.6.1.4.1.5003.9.10.10.1.2
OBJECT IDENTIFIER    

acSysTDMClock 1.3.6.1.4.1.5003.9.10.10.1.2.1
OBJECT IDENTIFIER    

acSysTDMClockSource 1.3.6.1.4.1.5003.9.10.10.1.2.1.1
Selects the clock source on which the board synchronizes. 1 = Local oscillator 3 = MVIP 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2 12 = SC2M 13 = SC4M 14 = SC8M 15 = BITS 16 = Network-B 17 = ATM-OC3 18 = ATM-OC3-B 19 = ATM-OC12 20 = Network-DS3-1 21 = Network-DS3-2 22 = Network-DS3-3 Default = 1 TP-1610 = 3. Access: Online. AC INI-Param: TDMBUSCLOCKSOURCE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), mVIP(3), network(4), h110-A(8), h110-B(9), netReference1(10), netReference2(11), sC-2M(12), sC-4M(13), sC-8M(14), bITS(15), network-b(16), aTM-OC3(17), aTM-OC3-B(18), aTM-OC12(19), network-DS3-1(20), network-DS3-2(21), network-DS3-3(22)  

acSysTDMClockEnableFallBack 1.3.6.1.4.1.5003.9.10.10.1.2.1.2
Defines the auto fallback of the clock. Range: 0 = Manual 1 = Auto Non-Revertive 2 = Auto Revertive. Access: Online. AC INI-Param: TDMBUSENABLEFALLBACK
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(0), autoNon-Revertive(1), auto-Revertive(2)  

acSysTDMClockLocalReference 1.3.6.1.4.1.5003.9.10.10.1.2.1.3
When the clock source is set to Network, this parameter selects the Trunk ID to be used as the clock synchronization source of the board. When using H.110/H.100 bus, this parameter also selects the trunk used as the clock source for the NetRef clock generation (in this case, the clock source must not be set to Network. Range = 0 to (MAX_TRUNK _NUM-1). Access: Online. AC INI-Param: TDMBusLocalReference
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..256  

acSysTDMClockMasterSlaveSelection 1.3.6.1.4.1.5003.9.10.10.1.2.1.4
Sets SC/MVIP/H.100/H.110 to either: 0 = Slave mode (another board in the system must supply the clock to the TDM bus) or Master mode (the board is the clock source for the TDM bus) or Secondary Master mode (for H100/H110 Bus only). 1 = H110A Master in Master mode 2 = H.110B Master. Access: Online. AC INI-Param: TDMBUSMASTERSLAVESELECTION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER acTDMBusSlaveMode(0), acTDMBusMasterMode(1), acH110BusSecondaryMasterMode(2)  

acSysTDMClockNetRefSpeed 1.3.6.1.4.1.5003.9.10.10.1.2.1.5
Determines the NetRef frequency (for both generation and synchronization). 0 = 8 kHz 1 = 1.544 MHz 2 = 2.048 MHz. Access: Online. AC INI-Param: TDMBUSNETREFSPEED
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER acTH110BusNetRefSpeed-8khz(0), acTH110BusNetRefSpeed-1544khz(1), acTH110BusNetRefSpeed-20488khz(2)  

acSysTDMClockAutoFallBackEnable 1.3.6.1.4.1.5003.9.10.10.1.2.1.6
Enables or disables the PSTN trunk auto-fallback feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysTDMClockAutoFallBackRevertingEnable 1.3.6.1.4.1.5003.9.10.10.1.2.1.7
Enables/disables the PSTN trunk auto-fallback reverting feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockRevertingEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysTDMClockBitsReference 1.3.6.1.4.1.5003.9.10.10.1.2.1.8
Configures the BITS clock reference when the board source clock is set to BITS and Fallback is set to manual or non-revertive. 1 = REF_1 2 = REF_2. Access: Online. AC INI-Param: TDMBITSClockReference
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2  

acSysTDMClockPLLOutOfRange 1.3.6.1.4.1.5003.9.10.10.1.2.1.9
Determines the valid PPM range outside the Stratum 3 standard. This parameter is only relevant for the TP8410 on the Mediant 3000. This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following possible values: OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7). Access: Online. AC INI-Param: PLLOutOfRange
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oor-9-2to12ppm(0), oor-40to52ppm(1), oor-100to130ppm(2), oor-64to83ppm(3), oor-13-8to18ppm(4), oor-24-6to32ppm(5), oor-36-6to47-5ppm(6), oor-52to67-5ppm(7)  

acSysTDMClockFallbackClock 1.3.6.1.4.1.5003.9.10.10.1.2.1.10
Selects the fallback clock source on which board synchronizes in the event of clock failure. 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2. Access: Online. AC INI-Param: TDMBusFallbackClock
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER network(4), h110-A(8), h110-B(9), netReference1(10), netReference2(11)  

acSysTDMBus 1.3.6.1.4.1.5003.9.10.10.1.2.2
OBJECT IDENTIFIER    

acSysTDMBusType 1.3.6.1.4.1.5003.9.10.10.1.2.2.1
Selects the TDM bus interface to be used (only one TDM bus interface can be enabled at one time although more than one can physically exist on the board). Range: 0 = acMVIP_BUS 1 = acSC_BUS 2 = acFRAMERS 4 = acH100_BUS 5 = EXT TDM 6 = Analog 8 = SW Pstn Default: TP-1610 and TP-2810 = 2 TPM-1100 = 5 TP-260 = 1. Access: Offline. AC INI-Param: TDMBUSTYPE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mVIP-BUS(0), sC-BUS(1), uSE-FRAMERS(2), qSLAC-BUS(3), uSE-H110-BUS(4), uSE-EXT-BUS(5), aNALOG-BUS(6), uSE-PSTN-SW-ONLY(8)  

acSysTDMBusSpeed 1.3.6.1.4.1.5003.9.10.10.1.2.2.2
Selects the TDM bus speed according to the Bus Type as follows: SC = 0/2/3 H.110/H.100 = 3 MVIP = 0 Where: 0 = 2048 kbps 2 = 4096 kbps 3 = 8192 kbps 4 = 16384 kbps Default: TP-260 = 2 All other boards = 3. Access: Offline. AC INI-Param: TDMBUSSPEED
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER acTDMBusSpeed-2Mbps(0), acTDMBusSpeed-4Mbps(2), acTDMBusSpeed-8Mbps(3), acTDMBusSpeed-16Mbps(4)  

acSysTDMBusOutputPort 1.3.6.1.4.1.5003.9.10.10.1.2.2.3
Defines the SC/MVIP/H.100/H.110 output port to be used for the board's channel #0. All other channels then occupy the next timeslots sequentially. Range: 0 to 15 for SC/MVIP 0 to 31 for H.110. Access: Offline. AC INI-Param: TDMBUSOUTPUTPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..31  

acSysTDMBusOutputStartingChannel 1.3.6.1.4.1.5003.9.10.10.1.2.2.4
Defines the outgoing TDM Timeslot for board's channel #0. The remaining channels are organized sequentially. Access: Offline. AC INI-Param: TDMBUSOUTPUTSTARTINGCHANNEL
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..127  

acSysPCM 1.3.6.1.4.1.5003.9.10.10.1.2.3
OBJECT IDENTIFIER    

acSysPCMLawSelect 1.3.6.1.4.1.5003.9.10.10.1.2.3.1
Selects the type of PCM companding law in input/output TDM bus (TDM bus is defined using the TDMBusType parameter). 1 = A-law 3 = Mu-Law. Access: Offline. AC INI-Param: PCMLAWSELECT
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER muLaw(3), aLaw(1), automatic(0)  

acSysPCMIdlePattern 1.3.6.1.4.1.5003.9.10.10.1.2.3.2
Defines the PCM pattern applied to the E1/T1 timeslot (B-channel) when the channel is idle. Default: 0xFF if PCMLawSelect is Mu-Law 0xD5 if PCMLawSelect is A-Law Range = 0x00 to 0xFF. Access: Offline. AC INI-Param: IDLEPCMPATTERN
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

acSysPCMIdleABCDPattern 1.3.6.1.4.1.5003.9.10.10.1.2.3.3
Defines the ABCD (CAS) pattern to be applied on the signaling bus before it is changed by the user or the PSTN protocol. This is only relevant when using PSTN interface with CAS protocols. Range = 0x0 to 0xF. Access: Offline. AC INI-Param: IDLEABCDPATTERN
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

acSysPCMSerialPortAuditIntervalMin 1.3.6.1.4.1.5003.9.10.10.1.2.3.4
Interval timeout in minutes, of the Serial Port audit. In case of 0 value, the audit isn't running. Access: Offline. AC INI-Param: SerialPortAuditIntervalMin
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..60  

acSysNetworkConfig 1.3.6.1.4.1.5003.9.10.10.1.3
OBJECT IDENTIFIER    

acSysIP 1.3.6.1.4.1.5003.9.10.10.1.3.1
OBJECT IDENTIFIER    

acSysIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.1
Board IP Address. In human readable form. in host byte order e.g. 192.10.1.2 = 0xc00a0102). Users should set the subnet mask to a valid value per the IP address. Access: Online. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysIPSubNetAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.2
Board SubNet Address. In human readable form. (in host byte order e.g. 255.255.255.0 = 0xffffff00). default =255.255.255.0. Access: Online. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysIPDefaultGatewayAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.3
Default Gateway Address. Board's Default Gateway IP address. In human readable form. (in host byte order e.g. 192.10.1.255 = 0xc00a01ff). Access: Online. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysIPDHCPEnable 1.3.6.1.4.1.5003.9.10.10.1.3.1.4
Enables/disables DHCP support. 0 = Disable 1 = Enable After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is enabled, the gateway attempts to obtain its IP address and other network parameters from the DHCP server. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isn't deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. Note: DHCPEnable is a special 'Hidden' parameter. Once defined and saved in flash memory, its assigned value doesn't revert to its default even if the parameter doesn't appear in the INI file. Access: Online. AC INI-Param: DHCPEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysIPDHCPSpeedFactor 1.3.6.1.4.1.5003.9.10.10.1.3.1.5
Controls the DHCP renewal speed. When set to 0, the DHCP lease renewal is disabled. Otherwise, the renewal time is divided by this factor. Some DHCP-enabled routers perform better when set to 4. 0 = Disable DHCP 1 = Normal 2 to 10 = Fast. Access: Offline. AC INI-Param: DHCPSpeedFactor
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10  

acSysIPDnsPrimaryServerType 1.3.6.1.4.1.5003.9.10.10.1.3.1.6
This parameter defines the DNS primary server's IP address type. Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipv4(1)  

acSysIPDnsPrimaryServer 1.3.6.1.4.1.5003.9.10.10.1.3.1.7
This parameter defines the DNS primary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSPriServerIP
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

acSysIPDnsSecondaryServerType 1.3.6.1.4.1.5003.9.10.10.1.3.1.8
This parameter defines the DNS secondary server's IP address type. Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipv4(1)  

acSysIPDnsSecondaryServer 1.3.6.1.4.1.5003.9.10.10.1.3.1.9
This parameter defines the DNS secondary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSSecServerIP
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

acSysIPDHCPLeaseRenewalEnable 1.3.6.1.4.1.5003.9.10.10.1.3.1.10
Enables/disables DHCP renewal support. This paramater will only take effect if DHCPEnable = 0. After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is disabled, the gateway will boot from flash. It will then attempt to communicate with the DHCP server to renew the lease. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isn't deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. For cases where the booting the board via DHCP is not desirable, but renewing DHCP leasing is. if DHCPEnable = 1, this paramater will not have any effect. Access: Online. AC INI-Param: EnableDHCPLeaseRenewal
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMultipleIP 1.3.6.1.4.1.5003.9.10.10.1.3.1.30
OBJECT IDENTIFIER    

acMultipleIPEnable 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.1
Enables the multiple IPs feature. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableMultipleIPs
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMultipleIPEnableTPNCPasOAM 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.2
Sets the TPNCP location on the Operation, Administration and Management (OAM) network, when operating in multiple IPs mode. If this parameter is set and the machine is working in multiple IPs mode, TPNCP is located on the OAM network. 0 = TPNCP on Control network 1 = TPNCP on OAM network. Access: Offline. AC INI-Param: EnableTPNCPasOAM
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMultipleIPEnableDNSasOAM 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.3
Sets the location of the DNS. If this parameter is set and the machine is functioning in multiple IPs mode, the DNS is located on the OAM network. If not, the DNS is on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableDNSasOAM
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMultipleIPEnableNTPasOAM 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4
Sets the location of the Network Time Protocol (NTP). If this parameter is set and the machine is functioning in multiple IPs mode, the NTP is located on the OAM network. If not, the NTP is located on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableNTPasOAM
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMultipleIPEnableSCTPasControl 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5
Sets the location of the Stream Control Transmission Protocol (SCTP). If this parameter is set and the machine is functioning in multiple IPs mode, the SCTP is located on the control network. If not, the SCTP is located on the OAM network. 0 = Default 1 = Enable. Access: Offline. AC INI-Param: EnableSCTPasControl
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMultipleIPEnableNetwotkSeparation 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.6
Enables Network Physical Separation. Allows the user to have separate port for each Network. Requires suitable hardware. 0 = Disabled 1 = Enabled. Access: Offline. AC INI-Param: ENABLENETWORKPHYSICALSEPARATION
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMultipleIPInterfaceTableAction 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.7
This is an action object. Set this to validateConfiguration(2) when you want the configuration in the acSysInterfaceTable to be validated immediately (as opposed to at reset). done(1) is the default value for any GET on this object. The results of the action should be followed in the syslog. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER done(1), validateConfiguration(2)  

acNetworkIPTable 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21
IP control table. Enables to add, remove or configure the device's networks.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcNetworkIPEntry

acNetworkIPEntry 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AcNetworkIPEntry  

acNetworkIPIndex 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.1
The row's index. AC INI-Param: N/A
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  INTEGER oam(1), media(2), control(3)  

acNetworkIPIfIndex 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.2
The row's index in the IF MIB. The IF MIB is not yet supported and so for now this is the same as the ipCidrRouteIfIndex object. 0 = OAM 1 = Media 2 = Control. AC INI-Param: N/A
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2  

acNetworkIPLocalIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.3
Sets the IP address of the OAM (Operation, Administration & Management) when operating in multiple IPs mode. Range: Legal IP address Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

acNetworkIPLocalSubnetMask 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.4
Sets the Subnet Mask for the OAM interface, when operating in multiple IPs mode. Range: Legal Subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

acNetworkIPLocalDefGW 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.5
Sets the Default gateway for the OAM interface when operating in multiple IPs mode. Range: Legal IP address in subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

acNetworkIPAdminState 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.6
Determines if a row is currentely active or not. Lock(1) - the row is in configuration (non active) state. UnLock(2) - row is in active state. Access: Online. AC INI-Param: N/A
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER lock(1), unLock(2)  

acSysInterfaceTable 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22
Multiple Interfaces' Interface Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysInterfaceEntry

acSysInterfaceEntry 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysInterfaceEntry  

acSysInterfaceIndex 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.1
Index Field for line. AC INI-Param: InterfaceTable_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..15  

acSysInterfaceRowStatus 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.2
ROWSTATUS Field for line. AC INI-Param: InterfaceTable_RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysInterfaceAction 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.3
Mangement Field for ACTIONS. AC INI-Param: InterfaceTable_Action
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

acSysInterfaceActionRes 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: InterfaceTable_ActionRes
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

acSysInterfaceApplicationTypes 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.5
The type assigned to the interface. Access: Offline. AC INI-Param: InterfaceTable_ApplicationTypes
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER oam(0), media(1), control(2), oamAndMedia(3), oamAndControl(4), mediaAndControl(5), oamAndMediaAndControl(6)  

acSysInterfaceMode 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.6
Interface configuration mode. Access: Offline. AC INI-Param: InterfaceTable_InterfaceMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER iPv6PrefixManual(3), iPv6Manual(4), iPv4Manual(10)  

acSysInterfaceIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.7
IP Address (can be either IPv4 or IPv6) for this interface. Access: Online. AC INI-Param: InterfaceTable_IPAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..45)  

acSysInterfacePrefixLength 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.8
The number of '1' bits in this interface's netmask. Access: Offline. AC INI-Param: InterfaceTable_PrefixLength
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..128  

acSysInterfaceGateway 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.9
Default Gateway. Filled in one row only. 0 in others. Access: Offline. AC INI-Param: InterfaceTable_Gateway
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..45)  

acSysInterfaceVlanID 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.10
VLAN ID of this interface. Access: Offline. AC INI-Param: InterfaceTable_VlanID
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4094  

acSysInterfaceName 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11
a 16 character string of this interface's name. Access: Offline. AC INI-Param: InterfaceTable_InterfaceName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..16)  

acSyslog 1.3.6.1.4.1.5003.9.10.10.1.3.2
OBJECT IDENTIFIER    

acSyslogServerIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.2.1
This parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Instant. AC INI-Param: SYSLOGSERVERIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSyslogEnable 1.3.6.1.4.1.5003.9.10.10.1.3.2.2
Enable SysLog protocol log. Access: Online. AC INI-Param: ENABLESYSLOG
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSyslogAcSyslogServerPortNumber 1.3.6.1.4.1.5003.9.10.10.1.3.2.3
Defines the Port number of the Syslog Server. Range = Legal Port Number. Access: Instant. AC INI-Param: SyslogServerPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysNTP 1.3.6.1.4.1.5003.9.10.10.1.3.3
OBJECT IDENTIFIER    

acSysNTPServerIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.3.1
This parameter is used to define the NTP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: NTPServerIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysNTPUtcOffset 1.3.6.1.4.1.5003.9.10.10.1.3.3.2
This parameter is used to define the NTP time to offset, in seconds. Default = 0 Range = -43200 to +43200 seconds. Access: Instant. AC INI-Param: NTPServerUTCOffset
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -43200..43200  

acSysNTPUpdateInterval 1.3.6.1.4.1.5003.9.10.10.1.3.3.3
This parameter defines the NTP update interval, in seconds. It's inadvisable to set it exceeding 1 month (2592000 seconds). Range = 0 to 2592000 seconds Default = 86400 seconds. Access: Instant. AC INI-Param: NTPUpdateInterval
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2147483647  

acSysDayLightSavingTime 1.3.6.1.4.1.5003.9.10.10.1.3.3.21
OBJECT IDENTIFIER    

acSysDayLightSavingTimeMode 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.1
Determines whether to enable the time ajustment to day light saving time while update time from NTP server. Access: Instant. AC INI-Param: DayLightSavingTimeEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysDayLightSavingTimeOffset 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.2
when DayLightSavingTimeEnable is Enable, this parametes determine the fix size in minutes: 0-120. Access: Instant. AC INI-Param: DayLightSavingTimeOffset
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..120  

acSysDayLightSavingTimeStart 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.3
This parameter defines the date and time of starting day light time in current year. Format mo:dd:hh:mm. Access: Instant. AC INI-Param: DayLightSavingTimeStart
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..11)  

acSysDayLightSavingTimeEnd 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.4
This parameter defines the date and time of ending day light time in current year. Format mo:dd:hh:mm. Access: Instant. AC INI-Param: DayLightSavingTimeEnd
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..11)  

acSysWEB 1.3.6.1.4.1.5003.9.10.10.1.3.4
OBJECT IDENTIFIER    

acSysWEBConfigDisable 1.3.6.1.4.1.5003.9.10.10.1.3.4.1
Enables or disables Web Configuration. 0 = Read & Write mode (default) 1 = Read Only mode. Access: Offline. AC INI-Param: DISABLEWEBCONFIG
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

acSysWEBHTTPSOnly 1.3.6.1.4.1.5003.9.10.10.1.3.4.2
Use this parameter to allow only HTTPS connections (force security). When set to 1, unencrypted HTTP (normally, port 80) is blocked. Access: Offline. AC INI-Param: HTTPSOnly
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysWEBHTTPSPort 1.3.6.1.4.1.5003.9.10.10.1.3.4.3
Determine the local Secure HTTPS port of the device. The default port is 443. Range = 1-65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: HTTPSPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysWEBWebUseRadiusLogin 1.3.6.1.4.1.5003.9.10.10.1.3.4.4
Uses the RADIUS (Remote Authentication Dial-In User Server/Service) for Web interface authentication. Make sure that ENABLERADIUS is on. Use of this parameter without HTTPSONLY = 1 is not recommended. Access: Instant. AC INI-Param: WEBRADIUSLOGIN
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysWEBHTTPSCipherString 1.3.6.1.4.1.5003.9.10.10.1.3.4.5
Requires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Offline. AC INI-Param: HTTPSCipherString
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..200)  

acSysWEBDenyAuthenticationTimer 1.3.6.1.4.1.5003.9.10.10.1.3.4.6
Defines the time the next authentication attempt from the last authentication faild IP should be denied. The range can be any value from 0 - 86400 in seconds. Access: Online. AC INI-Param: DenyAuthenticationTimer
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..86400  

acSysWEBWanHttpPort 1.3.6.1.4.1.5003.9.10.10.1.3.4.7
Determines the WAN HTTP port of the device. If set to 0, WAN HTTP access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysWEBWanHttpsPort 1.3.6.1.4.1.5003.9.10.10.1.3.4.8
Determines the WAN HTTPS port of the device. If set to 0, WAN HTTPS access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpsPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysWEBACLTable 1.3.6.1.4.1.5003.9.10.10.1.3.4.21
Access control list for the WEB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysWEBACLEntry

acSysWEBACLEntry 1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysWEBACLEntry  

acSysWEBACLIndex 1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.1
WEB ACL (Access Control List) index. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..9  

acSysWEBACLIP 1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.2
Allows IP addresses to connect to the Web interface. Set to zeroes to allow all IP addresses. Range: Valid IP address . Access: Instant. AC INI-Param: WEBACCESSLIST
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysWEBAccess 1.3.6.1.4.1.5003.9.10.10.1.3.5
OBJECT IDENTIFIER    

acSysWEBAccessTable 1.3.6.1.4.1.5003.9.10.10.1.3.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysWEBAccessEntry

acSysWEBAccessEntry 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysWEBAccessEntry  

acSysWEBAccessRowStatus 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.1
WEB Basic row-status. AC INI-Param: WEBAccessRowStatus
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1  

acSysWEBAccessAction 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.2
WEB Access action. AC INI-Param: WEBAccessAction
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..0  

acSysWEBAccessActionResult 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.3
WEB Access action result. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..0  

acSysWEBAccessIndex 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.4
WEB Access index. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER administrator(0), monitoringLevel(1)  

acSysWEBAccessUserName 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.5
WEB Basic user name. Range = String[26]. Access: Instant. AC INI-Param: WEBAccessUserName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..60)  

acSysWEBAccessUserCode 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.6
WEB Basic userAccess. Access: Instant. AC INI-Param: WEBAccessUserCode
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..60)  

acSysWEBAccessWebAuthMode 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.7
Selects HTTP basic (clear text) or digest (MD5) authentication for the web interface. When set to 0, basic authentication (clear text) will be used. When set to 1, digest authentication (MD5) will be used. When set to 2, digest authentication (MD5) will be used for HTTP, while basic authentication will be used for HTTPS. Note that turning on RADIUS login forces basic authentication. Access: Instant. AC INI-Param: WebAuthMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER basicMode(0), digestModeWhenPossible(1), digestModeHTTPOnly(2)  

acSysNATTraversal 1.3.6.1.4.1.5003.9.10.10.1.3.6
OBJECT IDENTIFIER    

acSysTelnet 1.3.6.1.4.1.5003.9.10.10.1.3.7
OBJECT IDENTIFIER    

acSysTelnetServerEnable 1.3.6.1.4.1.5003.9.10.10.1.3.7.1
Enables or disables the embedded Telnet server. Telnet is disabled by default for security reasons. 0 = Disable 1= Enable 2 = SSL mode (if available - requires an SSL-aware Telnet client software) SSL mode is not available on the MP-108 / MP-124 media gateways. Access: Instant. AC INI-Param: TelnetServerEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1), ssl(2)  

acSysTelnetServerPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.2
Defines the port number for the embedded Telnet server. Range = Valid port number. Access: Online. AC INI-Param: TELNETSERVERPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysTelnetServerIdleDisconnect 1.3.6.1.4.1.5003.9.10.10.1.3.7.3
This parameter is used to set the timeout for disconnection of an idle Telnet session (minutes). When set to zero, idle sessions are not disconnected. Range: Any number. Access: Offline. AC INI-Param: TelnetServerIdleDisconnect
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysTelnetSSHServerPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.4
Defines the port number for the embedded SSH server. Range = Valid port number. Access: Online. AC INI-Param: SSHServerPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysTelnetSSHServerEnable 1.3.6.1.4.1.5003.9.10.10.1.3.7.5
Enables or disables the embedded SSH server. 0 = Disable 1= Enable . Access: Online. AC INI-Param: SSHServerEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysTelnetSSHAdminKey 1.3.6.1.4.1.5003.9.10.10.1.3.7.6
This parameter holds an RSA public key for strong authentication to the SSH interface (if enabled). The value should be a base64-encoded string see the Security appendix for additional information. Access: Instant. AC INI-Param: SSHAdminKey
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..510)  

acSysTelnetSSHRequirePublicKey 1.3.6.1.4.1.5003.9.10.10.1.3.7.7
Enables or disables RSA public keys in SSH. When set to 0, RSA public keys are optional (if SSHAdminKey is set). When set to 1, RSA public keys are mandatory. Access: Instant. AC INI-Param: SSHRequirePublicKey
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysTelnetServerWanPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.8
Determines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtTelnetPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysTelnetWanSSHServerPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.9
Determines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtSSHPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysHTTPClient 1.3.6.1.4.1.5003.9.10.10.1.3.8
OBJECT IDENTIFIER    

acSysHTTPClientAutoUpdatePredefinedTime 1.3.6.1.4.1.5003.9.10.10.1.3.8.1
Schedules an automatic update to a predefined time of the day. The range is 'HH:MM' (24-hour format). For example: 20:18 . Access: Offline. AC INI-Param: AutoUpdatePredefinedTime
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..6)  

acSysHTTPClientAutoUpdateFrequency 1.3.6.1.4.1.5003.9.10.10.1.3.8.2
Determines the number of minutes the gateway waits between automatic updates. The default value is 0 (the update at fixed intervals mechanism is disabled). Range: Any number . Access: Offline. AC INI-Param: AutoUpdateFrequency
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65536  

acSysHTTPClientAutoUpdateCmpFile 1.3.6.1.4.1.5003.9.10.10.1.3.8.3
Enables / disables the automatic update mechanism for the cmp file. 0 = The automatic update mechanism doesn't apply to the cmp file (default). 1 = The automatic update mechanism includes the cmp file. Access: Offline. AC INI-Param: AutoUpdateCmpFile
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysHTTPClientCmpFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.4
This parameter provides a link to a software image (CMP file) to be downloaded from a remote server. . Access: Offline. AC INI-Param: CmpFileURL
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientIniFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.5
This parameter provides a link to an ini file to be downloaded from a remote server. . Access: Offline. AC INI-Param: IniFileURL
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientIniFileTemplateURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.6
Provides a link to an ini file to be downloaded from a remote server, in addition to IniFileUrl. Range = http://server_name/file, https://server_name/file. Access: Offline. AC INI-Param: IniFileTemplateUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientCPTFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.7
Provides a link to a Call Progress Tones (CPT) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: CptFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientVPFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.8
Provides a link to a Voice Prompts file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: VpFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientPRTFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.9
Provides a link to a prerecorded tones dat file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: PrtFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientFXSCoeffFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.10
Provides a link to an FXS coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXSCoeffFileUrl
Status: deprecated Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientFXOCoeffFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.11
Provides a link to an FXO coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXOCoeffFileUrl
Status: deprecated Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientCASFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.12
Provides a link to a Channel Associated Signaling (CAS) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: CasFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientXMLFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.13
Provides a link to an XML segments file, to be downloaded from a remote server. See the chapter 'Automatic Update Facility' for supported URL options. Access: Instant. AC INI-Param: APSSegmentsFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientCoderTableFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.14
Provides a link to a coder table (CTBL) file that is to be downloaded from a remote server. . Access: Instant. AC INI-Param: CoderTableFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientUserInfoFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.15
Provides a link to the user information file, to be downloaded using Automatic Update. Relevant only for H323 or SIP controlled devices. Access: Offline. AC INI-Param: UserInfoFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientDialPlanFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.16
URL for downloading a Dial Plan file using the Automatic Update facility. Access: Instant. AC INI-Param: DialPlanFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientTLSPkeyFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.17
URL for downloading a TLS private key file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSPkeyFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientTLSCertFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.18
URL for downloading a TLS certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSCertFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientTLSRootFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.19
URL for downloading a TLS trusted root certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSRootFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientWebLogoFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.20
URL for downloading a logo file for the web interface using the Automatic Update facility. Access: Offline. AC INI-Param: WebLogoFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientVideoFontFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.21
Indicates the URL for downloading a logo file for the web interface using the Automatic Update facility. Access: Offline. AC INI-Param: VideoFontFileUrl
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientV5PortConfFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.22
Provides a link to a software (V5PortConfiguration file) to be downloaded from a remote server. Access: Instant. AC INI-Param: V5PortConfigurationFileURL
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysHTTPClientDataConfigurationFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.23
Provides a link to a data configuration file to be downloaded from a remote server using the Automatic Update facility. Access: Instant. AC INI-Param: RGCONFFILEURL
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysSNMP 1.3.6.1.4.1.5003.9.10.10.1.3.9
OBJECT IDENTIFIER    

acSysSNMPKeepAliveTrapPort 1.3.6.1.4.1.5003.9.10.10.1.3.9.1
The port to which the keep alive traps are sent to. Access: Instant. AC INI-Param: KeepAliveTrapPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65334  

acSysSNMPEmsColdStrartIndication 1.3.6.1.4.1.5003.9.10.10.1.3.9.2
EMS object to be used as indication to the device's state in the 'eyes' of the EMS. Default - 0. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysSNMPWanPort 1.3.6.1.4.1.5003.9.10.10.1.3.9.3
This parameter specifies the WAN port number for SNMP requests and responses. If set to 0, WAN access to SNMP is disabled. Range = 0 to 65535. Access: Offline. AC INI-Param: WanMgmtSnmpPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65534  

acSysVLAN 1.3.6.1.4.1.5003.9.10.10.1.3.10
OBJECT IDENTIFIER    

acSysVLANOamVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.1
Sets the OAMP (Operation, Administration, Management and Provisioning) VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANOAMVLANID
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4094  

acSysVLANControlVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.2
Sets the control VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANCONTROLVLANID
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4094  

acSysVLANMediaVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.3
Sets the media VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANMEDIAVLANID
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4094  

acSysVLANNetworkServiceClassPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.4
This parameter is used to set the priority for Network service class content. Range = 0 to 7 Default = 7. Access: Online. AC INI-Param: VLANNETWORKSERVICECLASSPRIORITY
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

acSysVLANPremiumServiceClassMediaPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.5
Sets the priority for the Premium service class content and media traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSMEDIAPRIORITY
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

acSysVLANGoldServiceClassPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.6
Sets the priority for the Gold service class content. Range = 0 to 7 Default = 4. Access: Online. AC INI-Param: VLANGOLDSERVICECLASSPRIORITY
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

acSysVLANBronzeServiceClassPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.7
Sets the priority for the Bronze service class content. Range = 0 to 7 Default = 2. Access: Online. AC INI-Param: VLANBRONZESERVICECLASSPRIORITY
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

acSysVLANPremiumServiceClassControlPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.8
Sets the priority for the Premium service class content and control traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSCONTROLPRIORITY
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

acSysVLANNetworkServiceClassDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.9
This parameter is used to set the DiffServ for Network service class content. Range = 0 to 63 Default = 48. Access: Online. AC INI-Param: NETWORKSERVICECLASSDIFFSERV
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

acSysVLANPremiumServiceClassMediaDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.10
This parameter is used to set the DiffServ for Premium service class content and media traffic. Range = 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSMEDIADIFFSERV
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

acSysVLANPremiumServiceClassControlDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.11
Sets the DiffServ for the Premium service class content and control traffic. Range: 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSCONTROLDIFFSERV
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

acSysVLANGoldServiceClassDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.12
Sets the DiffServ for the Gold service class content. Range = 0 to 63 Default = 26. Access: Online. AC INI-Param: GOLDSERVICECLASSDIFFSERV
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

acSysVLANBronzeServiceClassDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.13
Sets the DiffServ for the Bronze service class content. Range = 0 to 63 Default = 10. Access: Online. AC INI-Param: BRONZESERVICECLASSDIFFSERV
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

acSysVLANVlanNativeVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.14
Sets the native VLAN identifier. Access: Online. AC INI-Param: VLANNATIVEVLANID
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4094  

acSysVLANMode 1.3.6.1.4.1.5003.9.10.10.1.3.10.15
Sets the VLAN functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: VLANMODE
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

acSysVlanMapTable 1.3.6.1.4.1.5003.9.10.10.1.3.10.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysVlanMapEntry

acSysVlanMapEntry 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysVlanMapEntry  

acSysVlanMapIndex 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.1
Index Field for line. Internal parameter. AC INI-Param: DiffServToVlanPriority_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..63  

acSysVlanMapRowStatus 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.2
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysVlanMapAction 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.3
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

acSysVlanMapActionRes 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.4
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

acSysVlanMapDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.5
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_DiffServ
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..63  

acSysVlanMapVlanPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.6
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_VlanPriority
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

acSysSCTP 1.3.6.1.4.1.5003.9.10.10.1.3.11
OBJECT IDENTIFIER    

acSysSCTPHeartBeatInterval 1.3.6.1.4.1.5003.9.10.10.1.3.11.1
Defines the SCTP heartbeat interval. Range: 1 to 3600. Access: Offline. AC INI-Param: SCTPHBInterval
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3600  

acSysSCTPT4SACKTimer 1.3.6.1.4.1.5003.9.10.10.1.3.11.2
Defines the SCTP T4 SACK timer interval. Range: 1 to 5. Access: Offline. AC INI-Param: SCTPT4SAckTimer
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..5  

acSysSCTPCheckSumMethod 1.3.6.1.4.1.5003.9.10.10.1.3.11.3
Stream Control Transmission Protocol (SCTP) uses a checksum mechanism in order to authenticate packets on both sides (the receiving side and the transmitting side). Presently, two checksum mechanisms are available: 0 = adler32 checksum mechanism 1 = crc32c checksum mechanism (improved mechanism). Access: Offline. AC INI-Param: SCTPChecksumMethod
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER adler(0), crc(1)  

acSysSCTPHostName 1.3.6.1.4.1.5003.9.10.10.1.3.11.4
When this parameter is set to any value other than an empty string, SCTP (Stream Control Transmission Protocol) uses the value as the value of the FQDN (Fully Qualified Domain Name) parameter attached to the INIT chunk. In this case, the FQDN parameter replaces any IP address parameters in the INIT chunk. This feature enables overcoming NAT problems where the original IP addresses belonging to the endpoint supports are converted into pseudo addresses. When this parameter is not set (default), the INIT chunk is sent without any FQDN parameter. Range = String[42]. Access: Offline. AC INI-Param: SCTPHOSTNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

acSysSCTPAssociationsNum 1.3.6.1.4.1.5003.9.10.10.1.3.11.5
Defines the maximum number of Stream Control Transmission Protocol (SCTP) associations that can be opened. Range: 1 to 8. Access: Offline. AC INI-Param: SCTPAssociationsNum
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8  

acSysEthernetPort 1.3.6.1.4.1.5003.9.10.10.1.3.12
OBJECT IDENTIFIER    

acSysEthernetPortPhyConfiguration 1.3.6.1.4.1.5003.9.10.10.1.3.12.1
Controls the Ethernet connection mode type. Auto-negotiate falls back to Half-Duplex mode (HD) when the opposite port is not in Auto-negotiate mode. The speed (10 Base-T or 100 Base-TX) in this mode is always configured correctly. 0 = 10 Base-T half-duplex 1 = 10 Base-T full-duplex 2 = 100 Base-TX half-duplex 3 = 100 Base-TX full-duplex 4 = Auto-negotiate. Access: Offline. AC INI-Param: EthernetPhyConfiguration
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER halfDuplex10BaseT(0), fullDuplex10BaseT(1), halfDuplex100BaseT(2), fullDuplex100BaseT(3), autoNegotiate(4), fullDuplex1000BaseT(7)  

acSysSTUN 1.3.6.1.4.1.5003.9.10.10.1.3.6.21
OBJECT IDENTIFIER    

acSysSTUNEnable 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.1
This parameter is used to enable the STUN module, used for NAT traversal of UDP packets. Access: Offline. AC INI-Param: ENABLESTUN
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysSTUNPrimaryServerIP 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.2
Defines the primary STUN Server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERPRIMARYIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysSTUNSecondaryServerIP 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.3
Defines the secondary STUN server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERSECONDARYIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysSTUNBindingLifeTime 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.4
This parameter is used to define the NAT binding lifetime, in seconds. STUN refreshes the binding information after this time expires. Range = 0 - 2592000. Access: Offline. AC INI-Param: NATBINDINGDEFAULTTIMEOUT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysMiscConfig 1.3.6.1.4.1.5003.9.10.10.1.4
OBJECT IDENTIFIER    

acSysDiagnostics 1.3.6.1.4.1.5003.9.10.10.1.4.1
OBJECT IDENTIFIER    

acSysDiagnosticsEnable 1.3.6.1.4.1.5003.9.10.10.1.4.1.1
Checks the correct functionality of the different hardware components on the board. On completion of the check, the board sends an EV_END_BIT value, which contains information on the test results of each hardware component. 0 = No diagnostics (default) 1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY and Flash) 2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY, but partial, test of Flash, a quicker mode). Access: Offline. AC INI-Param: ENABLEDIAGNOSTICS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), builtInTest(1), builtInTestwithPartialFlash(2), builtInTestWithSDRAM(3), builtInTestOnUtopiaVxb(4), internalUse(99)  

acSysDiagnosticsEnablePerformanceThresholdAlarms 1.3.6.1.4.1.5003.9.10.10.1.4.1.2
This parameter enables sending SNMP traps and Syslog messages when performance of the device is degraded (according to the configured thresholds). Access: Instant. AC INI-Param: PM_EnableThresholdAlarms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysDiagnosticsListOfActivitiesToLog 1.3.6.1.4.1.5003.9.10.10.1.4.1.3
This parameter defines what activities are to be reported by the device in the form of a log message. Parameter format is x,y,z-... where x,y,z are activity codes to be reported by the device. Supported activity codes: PVC - Parameter Value Changes. AFL - Auxiliary Files Loading. DR - Device Reset. FB - Flash Burning. SWU - SoftWareUpdate. ARD - Access to Restricted Domains. NAA - Non Authorized Access. SPC - Sensitive Parameters Changes. Access: Online. AC INI-Param: ActivityListToLog
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

acSysGenericINI 1.3.6.1.4.1.5003.9.10.10.1.4.2
OBJECT IDENTIFIER    

acSysGenericINILine 1.3.6.1.4.1.5003.9.10.10.1.4.2.1
Flexible INI file line. Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

acSysGenericINISecureStartup 1.3.6.1.4.1.5003.9.10.10.1.4.2.2
Enables or disables secure startup mode. In this mode, downloading of the INI file is restricted to a URL provided in prior configuration (see parameter IniFileURL) or via DHCP. Access: Offline. AC INI-Param: EnableSecureStartup
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysLicenseKey 1.3.6.1.4.1.5003.9.10.10.1.5
OBJECT IDENTIFIER    

acSysLicenseKeyString 1.3.6.1.4.1.5003.9.10.10.1.5.1
Coded Key specific for board and required features. Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..256)  

acSysLicenseKeyActiveList 1.3.6.1.4.1.5003.9.10.10.1.5.2
List of all avtivated features. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..484)  

acSysFile 1.3.6.1.4.1.5003.9.10.10.1.6
OBJECT IDENTIFIER    

acSysFileCpt 1.3.6.1.4.1.5003.9.10.10.1.6.1
Defines Call Progress Tone filenames (downloaded by TFTP). AC INI-Param: CALLPROGRESSTONESFILENAME
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileVp 1.3.6.1.4.1.5003.9.10.10.1.6.2
Defines the name (and path) of the file containing the Voice Prompts. Range = String of ASCII characters. AC INI-Param: VOICEPROMPTSFILENAME
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFilePrerecordedTones 1.3.6.1.4.1.5003.9.10.10.1.6.3
Defines the name (and path) of the file containing the Prerecorded Tones. Range = String of ASCII characters. AC INI-Param: PrerecordedTonesFileName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileXml 1.3.6.1.4.1.5003.9.10.10.1.6.4
This parameter is used to indicate the name of the file containing the XML file. AC INI-Param: XMLFileName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileExternalCoder 1.3.6.1.4.1.5003.9.10.10.1.6.5
Coders table file name. AC INI-Param: CODERTBLFILENAME
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileUserInfo 1.3.6.1.4.1.5003.9.10.10.1.6.6
The file name to be loaded. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileDialPlanFileName 1.3.6.1.4.1.5003.9.10.10.1.6.7
This parameter is used to indicate the name of the file containing the Dial Plan. AC INI-Param: gDialPlanFileName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileTLSPkeyFileName 1.3.6.1.4.1.5003.9.10.10.1.6.8
This parameter defines the name of a private key file (internal). Set to blank to regenerate the key and certificate. AC INI-Param: HTTPSPkeyFileName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileTLSCertFileName 1.3.6.1.4.1.5003.9.10.10.1.6.9
Defines the name of the HTTPS server certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSCertFileName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileTLSRootFileName 1.3.6.1.4.1.5003.9.10.10.1.6.10
Defines the name of the HTTPS trusted root certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSRootFileName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileFirstVideoFontFileName 1.3.6.1.4.1.5003.9.10.10.1.6.11
Indicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileSecondVideoFontFileName 1.3.6.1.4.1.5003.9.10.10.1.6.12
Indicates the name of the second file containing the Video Font file index. AC INI-Param: VideoFontFIleName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileThirdVideoFontFileName 1.3.6.1.4.1.5003.9.10.10.1.6.13
Indicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysFileV5PortConfFileName 1.3.6.1.4.1.5003.9.10.10.1.6.14
Indicates the name and location of the V5 Port Configuration file. AC INI-Param: V5PortConfigurationFileName
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acSysSecurity 1.3.6.1.4.1.5003.9.10.10.1.7
OBJECT IDENTIFIER    

acSysSecurityTLSVersion 1.3.6.1.4.1.5003.9.10.10.1.7.1
This parameter defines the supported versions of SSL/TLS. When set to 0, SSL/TLS handshakes always start with SSL 2.0 and switch to TLS 1.0 if both peers support it. When set to 1, TLS 1.0 is the only version supported clients attempting to contact the device using SSL 2.0 will be rejected. Possible values: 0 = SSL 2.0, SSL 3.0, and TLS 1.0 are supported (default) 1 = TLS 1.0 will always be used. Access: Offline. AC INI-Param: TLSVersion
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

acSysSecurityOcspEnable 1.3.6.1.4.1.5003.9.10.10.1.7.2
Enables or disables certificate checking via OCSP. Access: Instant. AC INI-Param: OcspEnable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

acSysSecurityOcspServerIPType 1.3.6.1.4.1.5003.9.10.10.1.7.3
This parameter defines the OCSP server's IP address Type. Currently - IPv4 only. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

acSysSecurityOcspServerIP 1.3.6.1.4.1.5003.9.10.10.1.7.4
This parameter defines the OCSP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspServerIP
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

acSysSecurityOcspServerPort 1.3.6.1.4.1.5003.9.10.10.1.7.5
This parameter defines the OCSP server's TCP port number. Range = 1 to 32767 . Access: Instant. AC INI-Param: OcspServerPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32767  

acSysSecurityOcspDefaultResponse 1.3.6.1.4.1.5003.9.10.10.1.7.6
Determines default OCSP behavior when the server cannot be contacted. 0 = reject peer certificate. 1 = allow peer certificate. . Access: Instant. AC INI-Param: OcspDefaultResponse
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rejectPeerCertificate(0), allowPeerCertificate(1)  

acSysSecurityTLSFIPS140Mode 1.3.6.1.4.1.5003.9.10.10.1.7.7
Determines whether to enable the FIPS140 mode for TLS. Access: Offline. AC INI-Param: TLS_Fips140_Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

acSysSecurityGenCsrSubjectName 1.3.6.1.4.1.5003.9.10.10.1.7.8
generate CSR Subject Name. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..600)  

acSysSecuritySelfSignedCertificateSubjectName 1.3.6.1.4.1.5003.9.10.10.1.7.9
Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

acSysSecurityOcspSecondaryServerIPType 1.3.6.1.4.1.5003.9.10.10.1.7.10
This parameter defines the OCSP secondary server's IP address Type. Currently - IPv4 only. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

acSysSecurityOcspSecondaryServerIP 1.3.6.1.4.1.5003.9.10.10.1.7.11
This parameter defines the OCSP secondary server IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspSecondaryServerIP
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

acSysSecurityHTTPSRequireClientCertificate 1.3.6.1.4.1.5003.9.10.10.1.7.12
Requires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Offline. AC INI-Param: HTTPSRequireClientCertificate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysSecurityAUPDVerifyCertificates 1.3.6.1.4.1.5003.9.10.10.1.7.13
This parameter configures the AutoUpdate facility to verify server certificates when using HTTPS. Access: Offline. AC INI-Param: AUPDVerifyCertificates
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysIKE 1.3.6.1.4.1.5003.9.10.10.1.7.21
OBJECT IDENTIFIER    

acSysIKEPolicyTable 1.3.6.1.4.1.5003.9.10.10.1.7.21.1
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysIKEPolicyEntry

acSysIKEPolicyEntry 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  AcSysIKEPolicyEntry  

acSysIKEPolicyIndex 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.1
This parameter is used for the Internet Key Encryption (IKE) Index Field for line. Internal parameter. AC INI-Param: IKE_DB_INDEX
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..19  

acSysIKEPolicyRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.2
This parameter is used for the Internet Key Encryption (IKE) ROWSTATUS Field for line. Internal parameter. AC INI-Param: IKE_DB_ROWSTATUS
Status: deprecated Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysIKEPolicyAction 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.3
This parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: IKE_DB_ACTION
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

acSysIKEPolicyActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.4
This parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: IKE_DB_ACTION_RESULT
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

acSysIKEPolicyShardKey 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.5
IKE Policy - Shared Key. Access: Instant. AC INI-Param: IKEPOLICYSHAREDKEY
Status: deprecated Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..80)  

acSysIKEPolicyLifeInSeconds 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.6
IKE Policy - IKE SA LifeTime in seconds. Access: Instant. AC INI-Param: IKEPOLICYLIFEINSEC
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIKEPolicyLifeInKB 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.7
IKE Policy - IKE SA LifeTime in KB. Access: Instant. AC INI-Param: IKEPOLICYLIFEINKB
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIKEPolicyProposal0Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.8
IKE Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIKEPolicyProposal1Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.9
IKE Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIKEPolicyProposal2Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.10
IKE Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIKEPolicyProposal3Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.11
IKE Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIKEPolicyProposal0Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.12
IKE Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIKEPolicyProposal1Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.13
IKE Policy - Proposal 1 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIKEPolicyProposal2Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.14
IKE Policy - Proposal 2 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIKEPolicyProposal3Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.15
IKE Policy - Proposal 3 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIKEPolicyProposal0DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.16
IKE Policy - Proposal 0 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dH-786-BIT(0), dH-1024-BIT(1), not-set(10)  

acSysIKEPolicyProposal1DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.17
IKE Policy - Proposal 1 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dH-786-BIT(0), dH-1024-BIT(1), not-set(10)  

acSysIKEPolicyProposal2DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.18
IKE Policy - Proposal 2 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dH-786-BIT(0), dH-1024-BIT(1), not-set(10)  

acSysIKEPolicyProposal3DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.19
IKE Policy - Proposal 3 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER dH-786-BIT(0), dH-1024-BIT(1), not-set(10)  

acSysIKEPolicyAuthenticationMethod 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.20
This parameter is used for Internet Key Encryption (IKE) Policy - IKE Authentication Method (Preshared key/ RSA). Access: Offline. AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER presharedKey(0), rsaSignature(1)  

acSysIPSec 1.3.6.1.4.1.5003.9.10.10.1.7.22
OBJECT IDENTIFIER    

acSysIPSecEnable 1.3.6.1.4.1.5003.9.10.10.1.7.22.1
IPsec Enable flag. Access: Offline. AC INI-Param: ENABLEIPSEC
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

acSysIPSecDpdMode 1.3.6.1.4.1.5003.9.10.10.1.7.22.2
IPsec Dead Peer Detection (RFC 3706) - Mode of Operation. One of the following values: '0' - Disabled (Default) '1' - Periodic '2' - On demand. Access: Instant. AC INI-Param: IPSECDPDMODE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), periodic(1), ondemand(2)  

acSysIPSecIKECertificateExtValidate 1.3.6.1.4.1.5003.9.10.10.1.7.22.3
Enables or disables certificate extension checking for IKE. Access: Instant. AC INI-Param: IKEcertificateExtValidate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

acSysIPSecSPDTable 1.3.6.1.4.1.5003.9.10.10.1.7.22.21
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysIPSecSPDEntry

acSysIPSecSPDEntry 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  AcSysIPSecSPDEntry  

acSysIPSecSPDIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.1
Security Policy Database (SPD) Index Field for line. Internal parameter. AC INI-Param: SPD_INDEX
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..19  

acSysIPSecSPDRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.2
Security Policy Database (SPD) ROWSTATUS field for line. Internal parameter. AC INI-Param: SPD_ROWSTATUS
Status: deprecated Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysIPSecSPDAction 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.3
Security Policy Database (SPD) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: SPD_ACTION
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

acSysIPSecSPDActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.4
Security Policy Database (SPD) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: SPD_ACTION_RESULT
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

acSysIPSecSPDPolicyRemoteIPAddr 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.5
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Remote IP address as IP or Host Name. Access: Instant. AC INI-Param: IPSECPOLICYREMOTEIPADDRESS
Status: deprecated Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..99)  

acSysIPSecSPDPolicySrcPort 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.6
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Source Port. Access: Instant. AC INI-Param: IPSECPOLICYSRCPORT
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65536  

acSysIPSecSPDPolicyDestPort 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.7
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Destination Port. Access: Instant. AC INI-Param: IPSECPOLICYDSTPORT
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65536  

acSysIPSecSPDPolicyProtocol 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.8
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Protocol. Access: Instant. AC INI-Param: IPSECPOLICYPROTOCOL
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

acSysIPSecSPDKeyExchangeMethodIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.9
This parameter is used for the Secure Internet Protocol (IPsec) Policy - Index into the Key Exchange Method Table (IKE Table). Access: Offline. AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIPSecSPDLifeInSeconds 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.10
IPsec Policy - IPSec SA LifeTime in seconds. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINSEC
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIPSecSPDLifeInKB 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.11
IPsec Policy - IPSec SA LifeTime in KB. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINKB
Status: deprecated Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIPSecSPDProposal0Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.12
IPsec Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIPSecSPDProposal1Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.13
IPsec Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIPSecSPDProposal2Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.14
IPsec Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIPSecSPDProposal3Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.15
IPsec Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER none(0), dES-CBC(1), triple-DES-CBC(2), aES(3), not-set(10)  

acSysIPSecSPDProposal0Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.16
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIPSecSPDProposal1Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.17
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIPSecSPDProposal2Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.18
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIPSecSPDProposal3Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.19
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER hMAC-SHA-1-96(2), hMAC-MD5-96(4), not-set(10)  

acSysIPSecSPDPolicyLocalIPAddrType 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.20
This parameter is used for Secure Internet Protocol (IPsec) Policy - Local IP address type (OAM/Control). Access: Offline. AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER oam(0), control(2)  

acSysIPSecSPDMode 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.21
This parameter is used for Secure Internet Protocol (IPsec) Policy - Mode of Operation (Transport/Tunneling). '0' - Transport '1' - Tunneling. Access: Instant. AC INI-Param: IPSECMODE
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER transport(0), tunneling(1)  

acSysIPSecSPDPolicyRemoteTunnelIPAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.22
This parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS
Status: deprecated Access: read-create
OBJECT-TYPE    
  IpAddress  

acSysIPSecSPDPolicyLocalTunnelIPAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.23
This parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS
Status: deprecated Access: read-create
OBJECT-TYPE    
  IpAddress  

acSysIPSecSPDPolicyRemoteTunnelSubnetMask 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.24
This parameter is used for Secure Internet Protocol (IPsec) Policy - Subnet Mask of the Remote IPSec Address. Access: Instant. AC INI-Param: IPSECPOLICYREMOTESUBNETMASK
Status: deprecated Access: read-create
OBJECT-TYPE    
  IpAddress  

acSysIPsecProposalTable 1.3.6.1.4.1.5003.9.10.10.1.7.22.22
IPsec Proposal table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysIPsecProposalEntry

acSysIPsecProposalEntry 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysIPsecProposalEntry  

acSysIPsecProposalIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.1
Index Field for line. AC INI-Param: IPsecProposalTable_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4  

acSysIPsecProposalRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.2
ROWSTATUS Field for line. AC INI-Param: IPsecProposalTable_RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysIPsecProposalAction 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.3
Mangement Field for ACTIONS. AC INI-Param: IPsecProposalTable_Action
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

acSysIPsecProposalActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: IPsecProposalTable_ActionRes
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

acSysIPsecProposalEncryptionAlgorithm 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.5
Selects the encryption (privacy) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_EncryptionAlgorithm
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), desCbc(1), tripleDesCbc(2), aes(3)  

acSysIPsecProposalAuthenticationAlgorithm 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.6
Selects the message authentication (integrity) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), hmacSha1-96(2), hmacMd5-96(4)  

acSysIPsecProposalDiffieHellmanGroup 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.7
Selects the Diffie-Hellman group to use. Access: Online. AC INI-Param: IPsecProposalTable_DHGroup
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER group1-768Bits(0), group2-1024Bits(1)  

acSysIPsecSATable 1.3.6.1.4.1.5003.9.10.10.1.7.22.23
IPsec SA table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysIPsecSAEntry

acSysIPsecSAEntry 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysIPsecSAEntry  

acSysIPsecSAIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.1
Index Field for line. AC INI-Param: IPsecSATable_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..20  

acSysIPsecSARowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.2
ROWSTATUS Field for line. AC INI-Param: IPsecSATable_RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysIPsecSAAction 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.3
Mangement Field for ACTIONS. AC INI-Param: IPsecSATable_Action
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..0  

acSysIPsecSAActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.4
Mangement Field for ACTIONS RESULT. AC INI-Param: IPsecSATable_ActionRes
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..0  

acSysIPsecSARemoteEndpointAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.5
IP address or DNS host name of the peer. Access: Online. AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..98)  

acSysIPsecSAAuthenticationMethod 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.6
Selects the method used for peer authentication during IKE main mode. Access: Online. AC INI-Param: IPsecSATable_AuthenticationMethod
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER presharedKey(0), rSASignature(1)  

acSysIPsecSASharedKey 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.7
Defines the pre-shared key (in textual format). Access: Online. AC INI-Param: IPsecSATable_SharedKey
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..79)  

acSysIPsecSASourcePort 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.8
Defines the source port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_SourcePort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysIPsecSADestPort 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.9
Defines the destination port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_DestPort
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysIPsecSAProtocol 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.10
Defines the protocol type to which this configuration applies. Standard IP protocol numbers should be used, e.g.: 0 = Any protocol (default) 17 = UDP 6 = TCP . Access: Online. AC INI-Param: IPsecSATable_Protocol
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

acSysIPsecSAPhase1SaLifetimeInSec 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.11
Determines the duration (in seconds) for which the negotiated IKE SA (main mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIPsecSAPhase2SaLifetimeInSec 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.12
Determines the duration (in seconds) for which the negotiated IPSec SA (quick mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIPsecSAPhase2SaLifetimeInKB 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.13
Determines the maximum volume of traffic (in kilobytes) for which the negotiated IPSec SA (quick mode) is valid. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIPsecSADPDmode 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.14
Controls dead peer detection (DPD) as per RFC 3706. Access: Online. AC INI-Param: IPsecSATable_DPDmode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dPDDisabled(0), dPDPeriodic(1), dPDOnDemand(2)  

acSysIPsecSAIPsecMode 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.15
Selects the IPSec mode of operation. 0 = Transport mode (default) 1 = Tunnel mode . Access: Online. AC INI-Param: IPsecSATable_IPsecMode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER transport(0), tunnel(1)  

acSysIPsecSARemoteTunnelAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.16
IP address of the peer router. Access: Online. AC INI-Param: IPsecSATable_RemoteTunnelAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..45)  

acSysIPsecSARemoteSubnetIPAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.17
IP address of the remote subnetwork. Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetIPAddress
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..45)  

acSysIPsecSARemoteSubnetPrefixLength 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.18
Prefix length of the Remote Subnet IP Address parameter (in bits). Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..128  

acFirewall 1.3.6.1.4.1.5003.9.10.10.1.7.23
OBJECT IDENTIFIER    

acSysAccessListTable 1.3.6.1.4.1.5003.9.10.10.1.7.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysAccessListEntry

acSysAccessListEntry 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysAccessListEntry  

acSysAccessListIndex 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.1
Index Field for line. Internal parameter. AC INI-Param: ACCESSLIST_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..50  

acSysAccessListRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.2
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysAccessListAction 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.3
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

acSysAccessListActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.4
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

acSysAccessListSourceIP 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.5
Source IP for access rule. Access: Online. AC INI-Param: ACCESSLIST_Source_IP
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..60)  

acSysAccessListNetMask 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.6
Mask for this access rule (bitwise ANDed with the source IP of the packet). Access: Online. AC INI-Param: ACCESSLIST_Net_Mask
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

acSysAccessListStartPort 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.7
Port range - start. Access: Online. AC INI-Param: ACCESSLIST_Start_Port
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysAccessListEndPort 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.8
Port range - end. Access: Online. AC INI-Param: ACCESSLIST_End_Port
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysAccessListProtocol 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.9
IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP, ANY or numeric value). Access: Online. AC INI-Param: ACCESSLIST_Protocol
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..10)  

acSysAccessListPacketSize 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.10
Maximum packet size (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Packet_Size
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysAccessListByteRate 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.11
Allowed traffic in bytes per second (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Rate
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysAccessListByteBurst 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.12
Allowed traffic burst in bytes (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Burst
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysAccessListAllowType 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.13
Allow or block traffic matching this rule. Access: Online. AC INI-Param: ACCESSLIST_Allow_Type
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notSet(0), allow(1), block(2)  

acSysAccessListMatchCount 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.14
Statistics: number of matched packets. AC INI-Param: ACCESSLIST_MatchCount
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysMediaEncription 1.3.6.1.4.1.5003.9.10.10.1.7.24
OBJECT IDENTIFIER    

acSysMediaEncriptionRTPAuthenticationDisableTx 1.3.6.1.4.1.5003.9.10.10.1.7.24.1
On a secured RTP session, determines whether to enable Authentication on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableTx
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

acSysMediaEncriptionRTPAuthenticationDisableRx 1.3.6.1.4.1.5003.9.10.10.1.7.24.2
On a secured RTP session, determines whether to enable Authentication on received RTP packets 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableRx
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

acSysMediaEncriptionRTPEncryptionDisableTx 1.3.6.1.4.1.5003.9.10.10.1.7.24.3
On a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableTx
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

acSysMediaEncriptionRTPEncryptionDisableRx 1.3.6.1.4.1.5003.9.10.10.1.7.24.4
On a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableRx
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

acSysMediaEncriptionRTCPEncryptionDisableTx 1.3.6.1.4.1.5003.9.10.10.1.7.24.5
On a secured RTP session, determines whether to enable Encryption on transmitted RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableTx
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

acSysMediaEncriptionRTCPEncryptionDisableRx 1.3.6.1.4.1.5003.9.10.10.1.7.24.6
On a secured RTP session, determines whether to enable Encryption on received RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableRx
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

acSys802dot1x 1.3.6.1.4.1.5003.9.10.10.1.7.25
OBJECT IDENTIFIER    

acSys802dot1xMode 1.3.6.1.4.1.5003.9.10.10.1.7.25.1
Enables support for IEEE 802.1x physical port security. 0 = Disabled 1 = EAP-MD5 2 = Protected EAP (PEAP) 3 = EAP-TLS . Access: Instant. AC INI-Param: 802.1xMode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), eapMd5(1), protectedEap(2), eapTls(3)  

acSys802dot1xUsername 1.3.6.1.4.1.5003.9.10.10.1.7.25.2
Username for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xUsername
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

acSys802dot1xPassword 1.3.6.1.4.1.5003.9.10.10.1.7.25.3
Password for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xPassword
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

acSys802dot1xVerifyPeerCertificate 1.3.6.1.4.1.5003.9.10.10.1.7.25.4
Verify Peer Certificate for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xVerifyPeerCertificate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysSRTP 1.3.6.1.4.1.5003.9.10.10.1.7.24.21
OBJECT IDENTIFIER    

acSysSRTPPacketMKISize 1.3.6.1.4.1.5003.9.10.10.1.7.24.21.1
Determines the size of the parameter Master Key Identifier (MKI) in SRTP Tx packets. One of the following values: 0 = MKI Disabled 1 - 4 = size (bytes of MKI). Access: Online. AC INI-Param: SRTPTxPacketMKISize
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4  

acSysSerialIF 1.3.6.1.4.1.5003.9.10.10.1.8
OBJECT IDENTIFIER    

acSysSerialIFBaudRate 1.3.6.1.4.1.5003.9.10.10.1.8.1
Enables changes to the Serial Baud Rate for Simplified Message Desk Interface (SMDI). Range = Any value accepted. Recommended standard values: 1200, 2400, 9600, 14400, 19200, 38400, 57600, 115200. Access: Offline. AC INI-Param: SerialBaudRate
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..115200  

acSysSerialIFData 1.3.6.1.4.1.5003.9.10.10.1.8.2
Changes the serial data bit for the Simplified Message Desk Interface (SMDI). 7 = 7 Bit 8 = 8 Bit. Access: Offline. AC INI-Param: SerialData
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 7..8  

acSysSerialIFParity 1.3.6.1.4.1.5003.9.10.10.1.8.3
Changes the serial parity for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Odd 2 = Even. Access: Offline. AC INI-Param: SerialParity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), odd(1), even(2)  

acSysSerialIFStop 1.3.6.1.4.1.5003.9.10.10.1.8.4
Changes the serial stop for the Simplified Message Desk Interface (SMDI). 1 = 1 Bit 2 = 2 Bit. Access: Offline. AC INI-Param: SerialStop
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2  

acSysSerialIFFlowControl 1.3.6.1.4.1.5003.9.10.10.1.8.5
Changes the serial flow control for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Hardware. Access: Offline. AC INI-Param: SerialFlowControl
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), hardware(1)  

acVoiceStream 1.3.6.1.4.1.5003.9.10.10.1.9
OBJECT IDENTIFIER    

acVoiceStreamStatus 1.3.6.1.4.1.5003.9.10.10.1.9.1
Enables/disables the voice streaming for all voice source types (HTTP, NFS, Local Storage). When enabled, the module requires some system resources, such as tasks and memory allocation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

acVoiceStreamUploadMethod 1.3.6.1.4.1.5003.9.10.10.1.9.2
Defines the HTTP request type for uploading the voice stream to the file server. 0 = POST 1 = PUT. Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER httpPostMethod(0), httpPutMethod(1)  

acVoiceStreamUploadPostUri 1.3.6.1.4.1.5003.9.10.10.1.9.3
Defines the URI used on the POST request, to upload voice data from the media server to a web server. This parameter is used only when using the HTTP POST for recording and the command is not issued by the Lib (tpncp protocol). The path needs to be set to the upload script on the web server. . Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..59)  

acSysAMS 1.3.6.1.4.1.5003.9.10.10.1.10
OBJECT IDENTIFIER    

acSysAMSProfile 1.3.6.1.4.1.5003.9.10.10.1.10.1
Enable/Disable AMS Advanced IVR play functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: AMSProfile
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

acSysAMSApsIpAddress 1.3.6.1.4.1.5003.9.10.10.1.10.2
Sets the destination UDP port to which the Heartbeat Packets are sent. Range = IP address in dotted notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Offline. AC INI-Param: HeartbeatDestIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysAMSApsPort 1.3.6.1.4.1.5003.9.10.10.1.10.3
Sets the destination UDP port to which the heartbeat packets are sent. Access: Offline. AC INI-Param: HeartbeatDestPort
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..64000  

acSysAMSPrimaryLanguage 1.3.6.1.4.1.5003.9.10.10.1.10.4
Defines the Primary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSPrimaryLanguage
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..3)  

acSysAMSSecondaryLanguage 1.3.6.1.4.1.5003.9.10.10.1.10.5
Defines the Secondary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSSecondaryLanguage
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..3)  

acSysAMSAPSProfile 1.3.6.1.4.1.5003.9.10.10.1.10.6
Indicates if the system should expect to use APS bundle (vp.dat and segments.xml files), or if the system should expect the vp.dat file only. A 1 means that an APS bundle should be used. A 0 means that the system should use vp.dat only. The default setting is 1, meaning expect APS bundle. Access: Offline. AC INI-Param: APSEnabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vpDatProvidedAudio(0), apsProvidedAudio(1)  

acSysAMSForceRepositoryEnable 1.3.6.1.4.1.5003.9.10.10.1.10.7
Indicates that a new audio repository (consisting of VP and XML files) should always be uploaded to the board regardless of whether signals are still being played on the old repository. Access: Instant. AC INI-Param: AMSForceRepositoryUpdateEnabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysNetworkFileSystem 1.3.6.1.4.1.5003.9.10.10.1.11
OBJECT IDENTIFIER    

acSysNFSTable 1.3.6.1.4.1.5003.9.10.10.1.11.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysNFSEntry

acSysNFSEntry 1.3.6.1.4.1.5003.9.10.10.1.11.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysNFSEntry  

acSysNFSIndex 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.1
Index Field for line. Internal parameter. AC INI-Param: NFSServers_Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..15  

acSysNFSRowStatus 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.2
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acSysNFSAction 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.3
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0)  

acSysNFSActionRes 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.4
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER succeeded(0)  

acSysNFSHostOrIP 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.5
The domain name or IP address of the NFS server. If a domain name is provided, then a DNS server must be configured. Access: Online. AC INI-Param: NFSServers_HostOrIP
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..40)  

acSysNFSRootPath 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.6
Path to the root of the exported file system. Access: Online. AC INI-Param: NFSServers_RootPath
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..100)  

acSysNFSNfsVersion 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.7
NFS version to use with this remote file system, 2 or 3 (default). Access: Online. AC INI-Param: NFSServers_NfsVersion
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER v2(2), v3(3)  

acSysNFSAuthType 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.8
Identifies the authentication method used with this remote file system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default). Access: Online. AC INI-Param: NFSServers_AuthType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER null(0), unix(1)  

acSysNFSUID 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.9
User ID used in authentication if using AUTH_UNIX. The default is 0. Access: Online. AC INI-Param: NFSServers_UID
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysNFSGID 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.10
Group ID used in authentication if using AUTH_UNIX. The default is 1. Access: Online. AC INI-Param: NFSServers_GID
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysNFSVlanType 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.11
The VLAN, OAM(0) or Media(1), to use when accessing this remote file system. The default is to use the media VLAN. This parameters applies only if multiple IP addresses are configured on this board. Access: Online. AC INI-Param: NFSServers_VlanType
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER oam(0), media(1)  

acSysHA 1.3.6.1.4.1.5003.9.10.10.1.12
OBJECT IDENTIFIER    

acSysHAGlobalIPAddress 1.3.6.1.4.1.5003.9.10.10.1.12.1
Defines the M3K global IP address to be used by the active module in HA system. (Dotted format notation. e.g., 192.10.1.255). Range = Legal IP address. Access: Offline. AC INI-Param: M3KGlobalIpAddr
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysTransmission 1.3.6.1.4.1.5003.9.10.10.1.13
OBJECT IDENTIFIER    

acSysTransmissionType 1.3.6.1.4.1.5003.9.10.10.1.13.1
Sets the PSTN Transmission type for the board: optical SONET / SDH or copper DS3. Access: Offline. AC INI-Param: PSTNTransmissionType
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), opticalSonetSdh(1), copperDs3(2), copperE1Ds1(3)  

acSysTiming 1.3.6.1.4.1.5003.9.10.10.1.14
OBJECT IDENTIFIER    

acSysTimingMode 1.3.6.1.4.1.5003.9.10.10.1.14.1
Determines the PSTN Timing synchonization mode of the Gateway. One of the following values: TM_External_MODE(1) -External Timing mode - use the SAT trunks Centralized Line Timing to synchronize the Gateway with one of the PSTN interfaces. TM_LineSync_MODE(2) -Distributed Line Timing mode (for the 1610 boards)- without using the SAT timing module. TM_Standalone_MODE(0) -Non-synchronized mode - each board or TPM is synchronized internally from one of the PSTN interfaces without using the SAT timing module. Access: Online. AC INI-Param: TMMode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standAlone(0), external(1), lineSync(2)  

acSysTimingValidationTime 1.3.6.1.4.1.5003.9.10.10.1.14.2
Reference validation time. Applicable for External timing and Line timing timing references. Range: 0 - 15 minutes. Resolution: 1 minute. Access: Online. AC INI-Param: TMReferenceValidationTime
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

acSysTimingClockToDeriveA 1.3.6.1.4.1.5003.9.10.10.1.14.3
Which Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_A
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER deriveREFFromLineClock1(0), deriveInternalClock(4), clockFromReceiveSide(7)  

acSysTimingClockToDeriveB 1.3.6.1.4.1.5003.9.10.10.1.14.4
Which Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_B
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER deriveREFFromLineClock1(0), deriveInternalClock(4), clockFromReceiveSide(7)  

acSysTimingExternalIFType 1.3.6.1.4.1.5003.9.10.10.1.14.5
Defines the external line reference (BITS) transmission format. Access: Online. AC INI-Param: TMExternalIFType
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e1CRC4(0), e1CAS(1), e1FAS(2), t1D4(3), t1ESF(4), t12(5)  

acSysTimingLoopBackRef1 1.3.6.1.4.1.5003.9.10.10.1.14.6
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loopDisable(0), loopEnable(1)  

acSysTimingLoopBackRef2 1.3.6.1.4.1.5003.9.10.10.1.14.7
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loopDisable(0), loopEnable(1)  

acSysTimingTransmitControl 1.3.6.1.4.1.5003.9.10.10.1.14.8
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMTransmitControl
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER systemClock(0), aIS(1), disableTransmit(2)  

acSysTimingE1LineBuildOut 1.3.6.1.4.1.5003.9.10.10.1.14.9
Sets the transmission power between the timing module on the SAT and the E1 external reference clock (ohms). This parameter is only relevant for the Mediant 3000.This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following values: E_75_OHM_with_high_return_loss(4),E_120_OHM_with_high_return_loss(5),E_75_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(6),E_120_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(7),E_75_OHM_normal(0),E_120_OHM_normal(1). Access: Online. AC INI-Param: TME1LineBuildOut
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER tm75OhmNormal(0), tm120OhmNormal(1), tm75OhmHighReturnLoss(4), tm120OhmHighReturnLoss(5), tm75OhmNormalGappedClock(6), tm120OhmNormalGappedClock(7)  

acSysTimingT1LineBuildOut 1.3.6.1.4.1.5003.9.10.10.1.14.10
External Reference Transmit Line Build Out. Access: Online. AC INI-Param: TMT1LineBuildOut
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER dSX10to133feet0dBCSU(0), dSX1133to266feet(1), dSX1266to399feet(2), dSX1399to533feet(3), dSX1533to655feet(4), dSX10to133ft0dBgappedclock(7)  

acSysLDAP 1.3.6.1.4.1.5003.9.10.10.1.15
OBJECT IDENTIFIER    

acSysLDAPServerIp 1.3.6.1.4.1.5003.9.10.10.1.15.1
This parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Online. AC INI-Param: LDAPSERVERIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acSysLDAPServerPort 1.3.6.1.4.1.5003.9.10.10.1.15.2
Defines the port number for the LDAP server. Range = Valid port number. Access: Online. AC INI-Param: LDAPSERVERPORT
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

acSysLDAPServerMaxRespondTime 1.3.6.1.4.1.5003.9.10.10.1.15.3
Defines the period of time the module will wait for LDAP server response (seconds). Access: Online. AC INI-Param: LDAPSERVERMAXRESPONDTIME
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..86400  

acSysLDAPServerDomainName 1.3.6.1.4.1.5003.9.10.10.1.15.4
This parameter is used to indicate the name of LDAP server. Access: Online. AC INI-Param: LDAPSERVERDOMAINNAME
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

acSysLDAPSearchDN 1.3.6.1.4.1.5003.9.10.10.1.15.5
This parameter is used to indicate the search DN for LDAP search request. Access: Online. AC INI-Param: LDAPSEARCHDN
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

acSysLDAPPassword 1.3.6.1.4.1.5003.9.10.10.1.15.6
This parameter is used to indicate the user password of LDAP server. Access: Online. AC INI-Param: LDAPPASSWORD
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

acSysLDAPBindDN 1.3.6.1.4.1.5003.9.10.10.1.15.7
This parameter is used to indicate the of LDAP server bind DN. Access: Online. AC INI-Param: LDAPBINDDN
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

acSysLDAPServiceEnable 1.3.6.1.4.1.5003.9.10.10.1.15.8
Used to either enable or disable LDAP service. 0- disable (default) 1 - enable. Access: Offline. AC INI-Param: LDAPSERVICEENABLE
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSystemStatus 1.3.6.1.4.1.5003.9.10.10.2
OBJECT IDENTIFIER    

acSysType 1.3.6.1.4.1.5003.9.10.10.2.1
OBJECT IDENTIFIER    

acSysTypeProduct 1.3.6.1.4.1.5003.9.10.10.2.1.1
The type of the Board. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER acUnknown(0), acTrunkPack-08(1), acMediaPack-108(2), acMediaPack-124(3), acTrunkPack-1600(20), acTPM1100(22), acTrunkPack-260-IpMedia(23), acTrunkPack-1610(24), acMediaPack-104(25), acMediaPack-102(26), acTrunkPack-1610-SB(29), acTrunkPack-1610-IpMedia(30), acTrunkPack-MEDIANT2000(31), acTrunkPack-STRETTO2000(32), acTrunkPack-IPMServer2000(33), acTrunkPack-2810(34), acTrunkPack-260-UN-IpMedia(35), acTrunkPack-260-IpMedia-30Ch(36), acTrunkPack-260-IpMedia-60Ch(37), acTrunkPack-260-IpMedia-120Ch(38), acTrunkPack-260RT-IpMedia-30Ch(39), acTrunkPack-260RT-IpMedia-60Ch(40), acTrunkPack-260RT-IpMedia-120Ch(41), acTrunkPack-260(42), acTrunkPack-260-UN(43), acTPM1100-PCM(44), acTrunkPack-6310(45), acTPM6300(46), acMediant1000(47), acIPMedia3000(48), acMediant3000(49), acStretto3000(50), acTrunkPack-6310-IpMedia(51), acTrunkPack-6310-SB(52), acATP-1610(53), acATP-260(54), acATP-260-UN(55), acMediaPack-118(56), acMediaPack114(57), acMediaPack112(58), acTrunkPack-6310-T3(59), acMediant3000-T3(60), acIPmedia3000-T3(61), acTrunkPack-6310-T3-IpMedia(62), acTrunkPack-8410(63), acTrunkPack-8410-IpMedia(64), acMediant-600(65), acTrunkPack-12610(66), acMediant1000-MSBG(67), acMediant-600-MSBG(68), acMediaPack-500-MSBG(69)  

acSysTypeDSP 1.3.6.1.4.1.5003.9.10.10.2.1.2
Dsp Type. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysTypeModule 1.3.6.1.4.1.5003.9.10.10.2.1.3
AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER soloist(0), second(1), first(2)  

acSysTypeCPUSpeed 1.3.6.1.4.1.5003.9.10.10.2.1.4
CPU Speed. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysVersion 1.3.6.1.4.1.5003.9.10.10.2.2
OBJECT IDENTIFIER    

acSysVersionSoftware 1.3.6.1.4.1.5003.9.10.10.2.2.1
TrunkPack Software Version. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acSysVersionFlash 1.3.6.1.4.1.5003.9.10.10.2.2.2
Flash [BootLoader] Version. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysVersionIniFile 1.3.6.1.4.1.5003.9.10.10.2.2.3
Ini file version. AC INI-Param: INIFileVersion
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysVersionSoftwareDate 1.3.6.1.4.1.5003.9.10.10.2.2.4
TrunkPack Software Date. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..40)  

acSysId 1.3.6.1.4.1.5003.9.10.10.2.3
OBJECT IDENTIFIER    

acSysIdName 1.3.6.1.4.1.5003.9.10.10.2.3.1
The name fo the board. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acSysIdSerialNumber 1.3.6.1.4.1.5003.9.10.10.2.3.2
serial number of board. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIdSlotNumber 1.3.6.1.4.1.5003.9.10.10.2.3.3
Slot number. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysIdFirstSerialNumber 1.3.6.1.4.1.5003.9.10.10.2.3.4
The device's first serial number. When the device is part of a dual module board this is the first module's serial number. When the device is the first module in a dual module or the device is not in a dual module board, the values for asSysIdSerialNumber and acSysIdFirstSerialNumber are the same. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysCount 1.3.6.1.4.1.5003.9.10.10.2.4
OBJECT IDENTIFIER    

acSysCountDSPs 1.3.6.1.4.1.5003.9.10.10.2.4.1
DSP Count. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysCountChannels 1.3.6.1.4.1.5003.9.10.10.2.4.2
Channel Count. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysCountTrunks 1.3.6.1.4.1.5003.9.10.10.2.4.3
Trunks Count. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysState 1.3.6.1.4.1.5003.9.10.10.2.5
OBJECT IDENTIFIER    

acSysStateTemperature 1.3.6.1.4.1.5003.9.10.10.2.5.1
Temperature of the board in degrees Celsius, should not go higher then 60!. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

acSysStateOperational 1.3.6.1.4.1.5003.9.10.10.2.5.2
The operational state of the gateway. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

acSysStateHAupdateInProgress 1.3.6.1.4.1.5003.9.10.10.2.5.3
Indicates during update process, which done between active and redundant boards. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER updateDone(1), updateInProgress(2)  

acSysStateGWSeverity 1.3.6.1.4.1.5003.9.10.10.2.5.4
The highest alarm severity on the device. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(0), indeterminate(1), warning(2), minor(3), major(4), critical(5)  

acSysStateIsPstnManagementEnable 1.3.6.1.4.1.5003.9.10.10.2.5.5
Is Pstn Management Enable 0 - Disable 1 - Enable. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acSysNetwork 1.3.6.1.4.1.5003.9.10.10.2.6
OBJECT IDENTIFIER    

acSysEthernet 1.3.6.1.4.1.5003.9.10.10.2.6.1
OBJECT IDENTIFIER    

acSysEthernetFirstPortDuplexMode 1.3.6.1.4.1.5003.9.10.10.2.6.1.1
full-duplex or half-duplex connection. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)  

acSysEthernetFirstPortSpeed 1.3.6.1.4.1.5003.9.10.10.2.6.1.2
AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000)  

acSysEthernetSecondPortDuplexMode 1.3.6.1.4.1.5003.9.10.10.2.6.1.3
full-duplex or half-duplex connection. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)  

acSysEthernetSecondPortSpeed 1.3.6.1.4.1.5003.9.10.10.2.6.1.4
AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000)  

acSysEthernetActivePortNumber 1.3.6.1.4.1.5003.9.10.10.2.6.1.5
Display the current active ethernet port number. 0 - not relevant. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2  

acSysEthernetStatusTable 1.3.6.1.4.1.5003.9.10.10.2.6.1.21
Ethernet relevant information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysEthernetStatusEntry

acSysEthernetStatusEntry 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysEthernetStatusEntry  

acSysEthernetStatusIndex 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.1
The row's index. On 8410 Systems: Index 1 - related to GBE port no.1 in the TER (Media). Index 2 - related to GBE port no.2 in the TER (Media). Index 3 - related to port 1A in PEM #1 (Control). Index 4 - related to port 1B in PEM #2 (Control). Index 5 - related to port 2A in PEM #1 (OAM). Index 6 - related to port 2B in PEM #2 (OAM). On MSBG only: 0 - WAN interface. 1-12 LAN interfaces. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..12  

acSysEthernetStatusPortDuplexMode 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.2
full-duplex or half-duplex connection. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)  

acSysEthernetStatusPortSpeed 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.3
port speed. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100), ac1000Mbps(1000)  

acSysEthernetStatusActivePortNumber 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.4
Status of ethernet port - active or not active. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notActive(0), active(1)  

acSysEthernetStatusPortState 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.5
Port State. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), blocking(1), learning(2), forwarding(3), notApplicable(10)  

acSysEthernetStatusPowerOverEthernet 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.6
Power over Ethernet interface status. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), active(1), notActive(2)  

acSysNAT 1.3.6.1.4.1.5003.9.10.10.2.6.2
OBJECT IDENTIFIER    

acSysNATType 1.3.6.1.4.1.5003.9.10.10.2.6.2.1
Identified NAT type. -1 - STUN client is disabled 0 - None 1 - FullCone 2 - Restricted 3 - PortRestricted 4 - Symmetric 5 - SymmetricFireWall 6 - Blocked 7 - Unknown 10 - NAT identification in progress. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stunDisabled(-1), none(0), fullCone(1), restricted(2), portRestricted(3), symmetric(4), symmetricFireWall(5), blocked(6), unknown(7), natIdentificationInProgress(10)  

acSysWebStat 1.3.6.1.4.1.5003.9.10.10.2.6.3
OBJECT IDENTIFIER    

acSysWebStatPasswordControlViaSNMP 1.3.6.1.4.1.5003.9.10.10.2.6.3.1
If set to 1 it will allow changing the web interface username and password via SNMP. AC INI-Param: WEBPasswordControlViaSNMP
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

acSysIPStatus 1.3.6.1.4.1.5003.9.10.10.2.6.4
OBJECT IDENTIFIER    

acSysInterfaceStatusTable 1.3.6.1.4.1.5003.9.10.10.2.6.4.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysInterfaceStatusEntry

acSysInterfaceStatusEntry 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysInterfaceStatusEntry  

acSysInterfaceStatusEntryIndex 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.1
Related Interface index in the interface configuration table (in case the table is empty - meaning there is only single IP the index will appear with 0). AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..15  

acSysInterfaceStatusTypeIndex 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.2
1 - IP Address. 2 - IPv6 Link-Local Address. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

acSysInterfaceStatusApplicationTypes 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.3
The type assigned to the interface. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER oam(0), media(1), control(2), oamAndMedia(3), oamAndControl(4), mediaAndControl(5), oamAndMediaAndControl(6), data(11)  

acSysInterfaceStatusMode 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.4
Interface configuration mode. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER iPv6PrefixManual(3), iPv6Manual(4), iPv4Manual(10)  

acSysInterfaceStatusIPAddress 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.5
IP Address (can be either IPv4 or IPv6) for this interface. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..45)  

acSysInterfaceStatusPrefixLength 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.6
The number of '1' bits in this interface's netmask. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..128  

acSysInterfaceStatusGateway 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.7
Default Gateway. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..45)  

acSysInterfaceStatusVlanID 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.8
VLAN ID of this interface. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4094  

acSysInterfaceStatusName 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.9
16 character string of this interface's name. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..16)  

acSysTime 1.3.6.1.4.1.5003.9.10.10.2.7
OBJECT IDENTIFIER    

acSysTimeUp 1.3.6.1.4.1.5003.9.10.10.2.7.1
Time (in Seconds) that the board is alive. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysVoicePrompt 1.3.6.1.4.1.5003.9.10.10.2.8
OBJECT IDENTIFIER    

acSysVoicePromptTotalMemorySize 1.3.6.1.4.1.5003.9.10.10.2.8.1
Get the total voice prompt memory size. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysVoicePromptMaxFreeMemorySize 1.3.6.1.4.1.5003.9.10.10.2.8.2
Get the maximu voice prompt memory free size. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysRepositoryAMS 1.3.6.1.4.1.5003.9.10.10.2.9
OBJECT IDENTIFIER    

acSysRepositoryAMSIsReadyForUpdate 1.3.6.1.4.1.5003.9.10.10.2.9.1
Verify if the old repository is free or there are signals still using it. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

acSysHAStatus 1.3.6.1.4.1.5003.9.10.10.2.10
OBJECT IDENTIFIER    

acSysHAStatusReady 1.3.6.1.4.1.5003.9.10.10.2.10.1
Defines whether the M3K system supports HA or not. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(1), yes(2), no(3)  

acSysLDAPStatus 1.3.6.1.4.1.5003.9.10.10.2.11
OBJECT IDENTIFIER    

acSysLDAPStatusServerMode 1.3.6.1.4.1.5003.9.10.10.2.11.1
LDAP server status. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), connectionBroken(1), connecting(2), connected(3)  

acSystemAction 1.3.6.1.4.1.5003.9.10.10.3
OBJECT IDENTIFIER    

acSysAction 1.3.6.1.4.1.5003.9.10.10.3.1
OBJECT IDENTIFIER    

acSysActionSet 1.3.6.1.4.1.5003.9.10.10.3.1.1
OBJECT IDENTIFIER    

acSysActionSetReset 1.3.6.1.4.1.5003.9.10.10.3.1.1.1
remote Reset. To remote reset the board, set the value of this object to 1. Note: Before Reset, The current boardConfiguration parameters will be burned to the board. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

acSysActionSetResetControl 1.3.6.1.4.1.5003.9.10.10.3.1.1.2
Determines the remote reset action. 1 - burn staged load image, if any, and config to flash, perform a reset, and load from flash 2 - perform a reset, and load from flash (staged load image, if any, and config is not burned to flash) 3 - perform a reset, and load from bootp/tftp (staged load image, if any, and config burn is not needed) * - an error is returned for any other value Note: The staged load image is an image of a cmp file that was previously loaded to a area in RAM via an HTTP upload. Access: Instant. AC INI-Param: RemoteResetControl
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER resetFromFlashAfterBurn(1), resetFromFlashNoBurn(2), resetFromBootP(3)  

acSysActionSetDefaults 1.3.6.1.4.1.5003.9.10.10.3.1.1.3
To set the board to default values, set the value of this object to 1. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

acSysActionSetSaveConfig 1.3.6.1.4.1.5003.9.10.10.3.1.1.4
To save all current configuration in the board onto the flash, set the value of this object to 1. NOTE: Do NOT save the configuration while voice is running - this will cause a delay. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

acSysActionSetAutoUpdate 1.3.6.1.4.1.5003.9.10.10.3.1.1.5
To update the system configuration according to the provisioned IniFileUrl, set the value of this object to 1. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

acSysActionSetGetTimeFromNTPServer 1.3.6.1.4.1.5003.9.10.10.3.1.1.6
Initiates an immediate NTP time fetch. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

acSysActionSetSwUpgrade 1.3.6.1.4.1.5003.9.10.10.3.1.1.7
Defines the type of SW upgrade in M3K HA system (Hitless or system reset). Access: Instant. AC INI-Param: M3KHASwUpgradeMode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hitLessUpGrade(1), systemResetUpGrade(2)  

acSysActionSetOnLineChangesApply 1.3.6.1.4.1.5003.9.10.10.3.1.1.8
Applies the board on line changed params. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER defaultValue(0), applyChanges(1)  

acSysActionSetIPSecTLSUpgrade 1.3.6.1.4.1.5003.9.10.10.3.1.1.9
To update the IPSec TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER defaultValue(0), upDateChanges(1)  

acSysActionSetGWAppTLSUpgrade 1.3.6.1.4.1.5003.9.10.10.3.1.1.10
To update the GWApp TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER defaultValue(0), upDateChanges(1)  

acSysActionSetConvertNetworkIFsConfiguration 1.3.6.1.4.1.5003.9.10.10.3.1.1.11
SET to 1 will convert network configuration to advance multiple network Interfaces mode. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER defaultValue(0), convertAction(1)  

acSysActionSetActionId 1.3.6.1.4.1.5003.9.10.10.3.1.1.12
This field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysActionSetAutoUpdateActionResult 1.3.6.1.4.1.5003.9.10.10.3.1.1.13
Indicates the autoupdates operation status in the form of a string: 'acSysActionId ; ; '. The status field can be: 'success'\'failure'\'inProgress'. The infromation is valid only when downloading one file at a time. Note - a second way of following the success of the file downloading is to see the files name being updated in the acSysFile subtree. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..200)  

acSysActionAdmin 1.3.6.1.4.1.5003.9.10.10.3.1.2
OBJECT IDENTIFIER    

acSysActionAdminState 1.3.6.1.4.1.5003.9.10.10.3.1.2.1
Determines the gateway's operational state. 0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl. 1 - shuttingDown: (read only) Graceful Shutdown is being carried out. 2 - unlocked: GW is in service. Access: Online. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER locked(0), shuttingDown(1), unlocked(2)  

acSysActionAdminStateLockTimeout 1.3.6.1.4.1.5003.9.10.10.3.1.2.2
Defines the time remaining (in seconds) for the shutdown to complete. 0 = immediate shutdown -1 = waits until all calls drop (infinite) >0 = the number of seconds to wait. Access: Offline. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..32768  

acSysUpload 1.3.6.1.4.1.5003.9.10.10.3.1.3
OBJECT IDENTIFIER    

acSysUploadActionType 1.3.6.1.4.1.5003.9.10.10.3.1.3.1
Action to be carried out. Setting this field triggers the action. File upload supported for iniFile(1), v5PortFile(16) and DataConfigurationFile(17) only access is instant. File removal supported for all other then iniFile(1), v5PortFile(16) and DataConfigurationFile(17), (v5PortFile removal is done via acV5PortActionType) access is offline. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), upload(1), remove(2), actionDone(10)  

acSysUploadFileType 1.3.6.1.4.1.5003.9.10.10.3.1.3.2
The file type to be uploaded. Note - for file types with more then one instance (like CAS files) use the acSysActionFileInstance to specify which instance you want to upload. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER iniFile(1), cptFile(2), vpFile(3), prerecordedTonesFile(4), fxsCoeffFile(5), fxoCoeffFile(6), casFile(7), xmlFile(8), externalCoderFile(9), userInfoFile(10), dialPlanFile(11), tlsPKeyFile(12), tlsCertFile(13), tlsRootFile(14), videoFontFile(15), v5PortFile(16), dataConfigurationFile(17)  

acSysUploadFileNumber 1.3.6.1.4.1.5003.9.10.10.3.1.3.3
File number for file types that have more then one file instance, such as CAS, VideoFont etc'. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..7  

acSysUploadFileURI 1.3.6.1.4.1.5003.9.10.10.3.1.3.4
URI indicating file location to be downloaded to. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..254)  

acSysUploadActionID 1.3.6.1.4.1.5003.9.10.10.3.1.3.5
This field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acSysUploadActionResult 1.3.6.1.4.1.5003.9.10.10.3.1.3.6
Action result. Includes action status (success, failure or inProgress), action ID. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..40)  

acSystemChassis 1.3.6.1.4.1.5003.9.10.10.4
OBJECT IDENTIFIER    

acSystemChassisDryContactsOutStatus 1.3.6.1.4.1.5003.9.10.10.4.1
Indicates current state of the alarm dry contacts - out signals (3 signals). This is a bit-map of possible conditions. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  BITS noAlarm(0), criticalAlarm(1), majorAlarm(2), minorAlarm(3)  

acSystemChassisDryContactsInStatus 1.3.6.1.4.1.5003.9.10.10.4.2
Indicates current state of the alarm dry contacts - in signals (1 signals). The role of each input signal should be according to the customer's requirements. This is a bit-map of possible conditions. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  BITS noAlarm(0), alarm1(1)  

acSystemChassisLastChanged 1.3.6.1.4.1.5003.9.10.10.4.3
The value of sysUpTime at the time a row is modified in any of the acSystemChassis subtree's objects. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

acSysModuleTable 1.3.6.1.4.1.5003.9.10.10.4.21
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysModuleEntry

acSysModuleEntry 1.3.6.1.4.1.5003.9.10.10.4.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysModuleEntry  

acSysModuleIndex 1.3.6.1.4.1.5003.9.10.10.4.21.1.1
The Module number in the system. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2147483647  

acSysModuleGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.21.1.2
The slot number in the chassis. 1 being the bottom slot and so on. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4  

acSysModuleType 1.3.6.1.4.1.5003.9.10.10.4.21.1.3
The module's type. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER acUnknown(0), acTrunkPack-08(1), acMediaPack-108(2), acMediaPack-124(3), acTrunkPack-1600(20), acTPM1100(22), acTrunkPack-260-IpMedia(23), acTrunkPack-1610(24), acMediaPack-104(25), acMediaPack-102(26), acTrunkPack-1610-SB(29), acTrunkPack-1610-IpMedia(30), acTrunkPack-MEDIANT2000(31), acTrunkPack-STRETTO2000(32), acTrunkPack-IPMServer2000(33), acTrunkPack-2810(34), acTrunkPack-260-UN-IpMedia(35), acTrunkPack-260-IpMedia-30Ch(36), acTrunkPack-260-IpMedia-60Ch(37), acTrunkPack-260-IpMedia-120Ch(38), acTrunkPack-260RT-IpMedia-30Ch(39), acTrunkPack-260RT-IpMedia-60Ch(40), acTrunkPack-260RT-IpMedia-120Ch(41), acTrunkPack-260(42), acTrunkPack-260-UN(43), acTPM1100-PCM(44), acTrunkPack-6310(45), acTPM6300(46), acMediant1000(47), acIPMedia3000(48), acMediant3000(49), acStretto3000(50), acTrunkPack-6310-IpMedia(51), acTrunkPack-6310-SB(52), acATP-1610(53), acATP-260(54), acATP-260-UN(55), acMediaPack-118(56), acMediaPack114(57), acMediaPack112(58), acTrunkPack-6310-T3(59), acMediant3000-T3(60), acIPmedia3000-T3(61), acTrunkPack-6310-T3-IpMedia(62), acTrunkPack-8410(63), acTrunkPack-8410-IpMedia(64), acMediaPack-500-MSBG(69), sA1(250), sA2(251), sA3(252), acMediant1000CPUmodule(253), acMediant1000IFDigitalModule(254), acMediant1000IFAnalogModule(255), acMediant1000IFBRIModule(256), acMediant1000IPMediaModule(257), acMediant600CPUmodule(258), acMediant600IFDigitalModule(259), acMediant600IFAnalogModule(260), acMediant600IFBRIModule(261), acMediant600IPMediaModule(262), acMediaPack500CPUmodule(265), acMediaPack500IFDigitalModule(266), acMediaPack500IFAnalogModule(267), acMediaPack500IFBRIModule(268), acMediaPack500IFWANModule(269), acMediaPack500IFWiFiModule(270), acMediaPack500IPMediaModule(271), acMediaPack500EthernetModule(272), acMediaPack500IFT1WANModule(273), acMediaPack500IFSHDSLModule(274), acMediaPack500IFADSLModule(275), acMediant1000IFWANModule(276), acMediant1000IFT1WANModule(277), acMediant1000IFSHDSLModule(278), acMediant1000IFADSLModule(279)  

acSysModulePresence 1.3.6.1.4.1.5003.9.10.10.4.21.1.4
Is the module present or missing. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER present(1), missing(2)  

acSysModuleLicenseKeyList 1.3.6.1.4.1.5003.9.10.10.4.21.1.5
List of active features as enabled by the license key. SA modules return NULL. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..1400)  

acSysModuleSerialNumber 1.3.6.1.4.1.5003.9.10.10.4.21.1.6
The module's serial number. For 6310 the serial number is the decimal form of the last 5 characters in the MAC Address. SA modules return 0. When the modules in the table are unavailable for audit (no HA) (-1) is returned. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..2147483647  

acSysModuleSWVersion 1.3.6.1.4.1.5003.9.10.10.4.21.1.7
The version of the SW being run in the module placed . SA Modules return NULL. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acSysModuleOperationalState 1.3.6.1.4.1.5003.9.10.10.4.21.1.8
The operational state of the module. Determined internally by the system. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

acSysModuleHAStatus 1.3.6.1.4.1.5003.9.10.10.4.21.1.9
Modules status with in the system. Designed to define the HA state. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER acitveNonHA(1), active(2), redundant(3), standAlone(4), redundantNonHA(5), notApplicable(6)  

acSysModuleLEDs 1.3.6.1.4.1.5003.9.10.10.4.21.1.10
Bit Field for the LEDs on the front of the module. LSB in each nibble (half Byte) is 0 - constant, 1 - blinking. 3 MSB are the color - 0 - none 1- Green 2 - Red 3 - Yellow 4 - Orange 5 - Blue 7 - Gray (unknown). AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..50)  

acSysModuleTemperature 1.3.6.1.4.1.5003.9.10.10.4.21.1.11
Temperature of the board in degrees Celsius. SA Modules return 0. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..100  

acSysModuleActions 1.3.6.1.4.1.5003.9.10.10.4.21.1.12
Actions to be performed by the module. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), switchOver(2), actionDone(3)  

acSysModuleFRUaction 1.3.6.1.4.1.5003.9.10.10.4.21.1.13
Field Replace Unit actions Relevant to IF-Module only. Access: Instant. AC INI-Param: N/A
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fruActionDone(1), fruOutOfServiceAction(2), fruBackToServiceAction(3), fruNotApplicable(4)  

acSysModuleFRUstatus 1.3.6.1.4.1.5003.9.10.10.4.21.1.14
Field Replace Unit module's status. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER moduleNotExist(1), moduleExistOk(2), moduleOutOfService(3), moduleBackToServiceStart(4), moduleMismatch(5), moduleFaulty(6), notApplicable(7)  

acSysModuleNumOfPorts 1.3.6.1.4.1.5003.9.10.10.4.21.1.15
The number of physical interfaces in a module, analog or digital. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4  

acSysModuleFirstPortNum 1.3.6.1.4.1.5003.9.10.10.4.21.1.16
The logical number as seen in the general trunk/analog-channel table of the first port in the module in question. Since analog and digital ports can be operational at once, analog and digital ports may have same logical number. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..19  

acSysFanTrayTable 1.3.6.1.4.1.5003.9.10.10.4.22
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysFanTrayEntry

acSysFanTrayEntry 1.3.6.1.4.1.5003.9.10.10.4.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysFanTrayEntry  

acSysFanTrayIndex 1.3.6.1.4.1.5003.9.10.10.4.22.1.1
Fan-Tray's index in the system. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2147483647  

acSysFanTrayGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.22.1.2
The slot number in the chassis. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

acSysFanTrayExistence 1.3.6.1.4.1.5003.9.10.10.4.22.1.3
Is the Fan-Tray present or missing. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER present(1), missing(2)  

acSysFanTrayType 1.3.6.1.4.1.5003.9.10.10.4.22.1.4
The type of the Fan-Tray . AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..50)  

acSysFanTrayLEDs 1.3.6.1.4.1.5003.9.10.10.4.22.1.5
This object built as a bit-field which represents the Fan-Tray's LEDs status. The first four bites represent the System's LED status and the last four bites represent the Shelf-LED's status. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

acSysFanTraySeverity 1.3.6.1.4.1.5003.9.10.10.4.22.1.6
The Severity of the whole fan tray according to the current active alarm in the alarm table: Critical, Major or cleared. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cleared(0), indeterminate(1), warning(2), minor(3), major(4), critical(5)  

acSysFanTrayFansConfiguredSpeed 1.3.6.1.4.1.5003.9.10.10.4.22.1.7
The fan's configured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

acSysFanTrayFansCurrentSpeed 1.3.6.1.4.1.5003.9.10.10.4.22.1.8
The fan's mesured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

acSysFanTrayFansStatus 1.3.6.1.4.1.5003.9.10.10.4.22.1.9
A bit field which display the working status of each fan in the Fan-Tray. 0 - Working 1 - Faulty. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1)  

acSysPowerSupplyTable 1.3.6.1.4.1.5003.9.10.10.4.23
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysPowerSupplyEntry

acSysPowerSupplyEntry 1.3.6.1.4.1.5003.9.10.10.4.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysPowerSupplyEntry  

acSysPowerSupplyIndex 1.3.6.1.4.1.5003.9.10.10.4.23.1.1
Power-Supply's index in the system. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2147483647  

acSysPowerSupplyGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.23.1.2
The slot number in the chassis. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2  

acSysPowerSupplyExistence 1.3.6.1.4.1.5003.9.10.10.4.23.1.3
Is the Power-Supply present or missing. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER present(1), missing(2)  

acSysPowerSupplyHwversion 1.3.6.1.4.1.5003.9.10.10.4.23.1.4
PS's HW version. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acSysPowerSupplyLEDs 1.3.6.1.4.1.5003.9.10.10.4.23.1.5
A bit-field representation of the Power-Supply LEDs' status. The first four bites represent the Power-Supply LED's status and the last four bites represent the Fault LED's status. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

acSysPowerSupplySeverity 1.3.6.1.4.1.5003.9.10.10.4.23.1.6
The Severity of the power-supply according to the current active alarm in the alarm table. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

acSysPEMTable 1.3.6.1.4.1.5003.9.10.10.4.24
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysPEMEntry

acSysPEMEntry 1.3.6.1.4.1.5003.9.10.10.4.24.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysPEMEntry  

acSysPEMIndex 1.3.6.1.4.1.5003.9.10.10.4.24.1.1
PEM-Module's index in the system. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2147483647  

acSysPEMGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.24.1.2
The slot number in the chassis. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2  

acSysPEMExistence 1.3.6.1.4.1.5003.9.10.10.4.24.1.3
Is the PEM-Module present or missing. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER present(1), missing(2)  

acSysPEMType 1.3.6.1.4.1.5003.9.10.10.4.24.1.4
PEM's Type. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acSysPEMElectricWireConnection 1.3.6.1.4.1.5003.9.10.10.4.24.1.5
Present the status of the electricity connector located on the PEM card. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

acSysSATModule 1.3.6.1.4.1.5003.9.10.10.4.25
OBJECT IDENTIFIER    

acSysSATTable 1.3.6.1.4.1.5003.9.10.10.4.25.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysSATEntry

acSysSATEntry 1.3.6.1.4.1.5003.9.10.10.4.25.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysSATEntry  

acSysSATSatIndex 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.1
SAT-Module's index in the system. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

acSysSATGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.2
The slot number in the chassis. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 2..4  

acSysSATType 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.3
SAT's Type. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acSysSATInitInformation 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.4
Sat's Init Information. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER detected(0), reConfig(1), reConfigTry2(2), reConfigTry3(3), notInitialized(4), initIsMissing(5), initWasReset(6), initFail(7), initInProgress(8), initUpdateREFTable(9), remoteKeepAlive(10), initComplete(11)  

acSysSATTimingUnitExistence 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.5
Is the Timig Unit present or missing. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER exist(1), notExist(2)  

acSysSATTimingRefSelection 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.6
SAT's Timing Reference Selection. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bITSNOREF(0), rEFFromBITSA(1), rEFFromBITSB(2), bITSNOREF1(3), rEFFromLineClock1(4), rEFFromLineClock2(5), rEFFromLineClock3(6), rEFFromLineClock7(7)  

acSysSATFramersTable 1.3.6.1.4.1.5003.9.10.10.4.25.22
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysSATFramersEntry

acSysSATFramersEntry 1.3.6.1.4.1.5003.9.10.10.4.25.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysSATFramersEntry  

acSysSATFramersSatIndex 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.1
SAT-Module's index in the system. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

acSysSATFramersFramerIndex 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.2
Framer's Index. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

acSysSATFramersFramerInterfaceStatus 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.3
Framer Interface Status. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER framerInitialized(0), framerNotInitialized(1)  

acSysSATFramersFramerLoopBackRef 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.4
Frame rLoop Back Reference. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER loopdisable(0), loopenable(1)  

acSysSATFramersFramerInterfaceType 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.5
Framer Interface Type. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER e1CRC4(0), e1CAS(1), e1FAS(2), t1D4(3), t1ESF(4), t12(5)  

acSysSATFramersFramerTransmitControl 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.6
Framer Transmit Control. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER systemClock(0), aIS(1), disableTransmit(2)  

acSysSATFramersRxStatus 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.7
Provides the alarm status of the clock interface. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarmClear(0), lOFAlarm(1), lOSAlarm(2), aISAlarm(3), aISInit(4)  

acSysSATFramersIsUsedAsPLLClock 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.8
Is Used As PLL Clock indication. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notUsed(0), used(1)  

acSysTimingModule 1.3.6.1.4.1.5003.9.10.10.4.26
OBJECT IDENTIFIER    

acSysPLLStatusTable 1.3.6.1.4.1.5003.9.10.10.4.26.21
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSysPLLStatusEntry

acSysPLLStatusEntry 1.3.6.1.4.1.5003.9.10.10.4.26.21.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSysPLLStatusEntry  

acSysPLLStatusIndex 1.3.6.1.4.1.5003.9.10.10.4.26.21.1.1
Table's Index. AC INI-Param: N/A
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..1  

acSysPLLStatusOperatingMode 1.3.6.1.4.1.5003.9.10.10.4.26.21.1.2
PLL's Current Operating Mode. AC INI-Param: N/A
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER freeRun(0), lockToRef1(1), lockToRef2(2), lockToLocal(3), holdOver(4)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor