AC-LAG-MIB

File: AC-LAG-MIB.mib (49397 bytes)

Imported modules

APPIAN-SMI-MIB SNMPv2-SMI SNMPv2-TC
SNMPv2-CONF

Imported symbols

acPport AcOpStatus AcAdminStatus
AcSlotNumber AcPortNumber AcNodeId
MODULE-IDENTITY OBJECT-TYPE Counter32
TimeTicks DisplayString MacAddress
TEXTUAL-CONVENTION TruthValue MODULE-COMPLIANCE
OBJECT-GROUP

Defined Types

LacpKey  
TEXTUAL-CONVENTION    
  current INTEGER 0..65535

LacpState  
TEXTUAL-CONVENTION    
  current BITS lacpActivity(0), lacpTimeout(1), aggregation(2), synchronization(3), collecting(4), distributing(5), defaulted(6), expired(7)

ChurnState  
TEXTUAL-CONVENTION    
  current INTEGER noChurn(1), churn(2), churnMonitor(3)

PortList  
TEXTUAL-CONVENTION    
  current STRING

AcAggInstanceIndex  
TEXTUAL-CONVENTION    
  current INTEGER 1..64

AcAggInstanceValue  
TEXTUAL-CONVENTION    
  current INTEGER 0..64

AcDot3adAggEntry  
SEQUENCE    
  acDot3adAggNodeIdIndex AcNodeId
  acDot3adAggInstanceIndex AcAggInstanceIndex
  acDot3adAggMACAddress MacAddress
  acDot3adAggActorSystemPriority INTEGER
  acDot3adAggActorSystemID MacAddress
  acDot3adAggAggregateOrIndividual TruthValue
  acDot3adAggActorAdminKey LacpKey
  acDot3adAggActorOperKey LacpKey
  acDot3adAggPartnerSystemID MacAddress
  acDot3adAggPartnerSystemPriority INTEGER
  acDot3adAggPartnerOperKey LacpKey
  acDot3adAggCollectorMaxDelay INTEGER

AcDot3adAggPortListEntry  
SEQUENCE    
  acDot3adAggPortListPorts PortList

AcDot3adAggPortEntry  
SEQUENCE    
  acDot3adAggPortNodeIdIndex AcNodeId
  acDot3adAggPortSlotIndex AcSlotNumber
  acDot3adAggPortPortIndex AcPortNumber
  acDot3adAggPortActorSystemPriority INTEGER
  acDot3adAggPortActorSystemID MacAddress
  acDot3adAggPortActorAdminKey LacpKey
  acDot3adAggPortActorOperKey LacpKey
  acDot3adAggPortPartnerAdminSystemPriority INTEGER
  acDot3adAggPortPartnerOperSystemPriority INTEGER
  acDot3adAggPortPartnerAdminSystemID MacAddress
  acDot3adAggPortPartnerOperSystemID MacAddress
  acDot3adAggPortPartnerAdminKey LacpKey
  acDot3adAggPortPartnerOperKey LacpKey
  acDot3adAggPortSelectedAggID AcAggInstanceValue
  acDot3adAggPortAttachedAggID AcAggInstanceValue
  acDot3adAggPortActorPort INTEGER
  acDot3adAggPortActorPortPriority INTEGER
  acDot3adAggPortPartnerAdminPort INTEGER
  acDot3adAggPortPartnerOperPort INTEGER
  acDot3adAggPortPartnerAdminPortPriority INTEGER
  acDot3adAggPortPartnerOperPortPriority INTEGER
  acDot3adAggPortActorAdminState LacpState
  acDot3adAggPortActorOperState LacpState
  acDot3adAggPortPartnerAdminState LacpState
  acDot3adAggPortPartnerOperState LacpState
  acDot3adAggPortAggregateOrIndividual TruthValue

AcDot3adAggPortStatsEntry  
SEQUENCE    
  acDot3adAggPortStatsLACPDUsRx Counter32
  acDot3adAggPortStatsMarkerPDUsRx Counter32
  acDot3adAggPortStatsMarkerResponsePDUsRx Counter32
  acDot3adAggPortStatsUnknownRx Counter32
  acDot3adAggPortStatsIllegalRx Counter32
  acDot3adAggPortStatsLACPDUsTx Counter32
  acDot3adAggPortStatsMarkerPDUsTx Counter32
  acDot3adAggPortStatsMarkerResponsePDUsTx Counter32

AcDot3adAggPortDebugEntry  
SEQUENCE    
  acDot3adAggPortDebugRxState INTEGER
  acDot3adAggPortDebugLastRxTime TimeTicks
  acDot3adAggPortDebugMuxState INTEGER
  acDot3adAggPortDebugMuxReason DisplayString
  acDot3adAggPortDebugActorChurnState ChurnState
  acDot3adAggPortDebugPartnerChurnState ChurnState
  acDot3adAggPortDebugActorChurnCount Counter32
  acDot3adAggPortDebugPartnerChurnCount Counter32
  acDot3adAggPortDebugActorSyncTransitionCount Counter32
  acDot3adAggPortDebugPartnerSyncTransitionCount Counter32
  acDot3adAggPortDebugActorChangeCount Counter32
  acDot3adAggPortDebugPartnerChangeCount Counter32

Defined Values

acLagMIB 1.3.6.1.4.1.2785.2.3.8
The Appian Communications Link Aggregation module for managing IEEE Std 802.3ad.
MODULE-IDENTITY    

lagMIBObjects 1.3.6.1.4.1.2785.2.3.8.1
OBJECT IDENTIFIER    

acDot3adAgg 1.3.6.1.4.1.2785.2.3.8.1.1
OBJECT IDENTIFIER    

acDot3adAggPort 1.3.6.1.4.1.2785.2.3.8.1.2
OBJECT IDENTIFIER    

acDot3adTablesLastChanged 1.3.6.1.4.1.2785.2.3.8.1.3
This object indicates the time of the most recent change to the acDot3adAggTable, acDot3adAggPortListTable, or acDot3adAggPortTable.
OBJECT-TYPE    
  TimeTicks  

acDot3adAggTable 1.3.6.1.4.1.2785.2.3.8.1.1.1
A table that contains information about every Aggregator that is associated with this System.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDot3adAggEntry

acDot3adAggEntry 1.3.6.1.4.1.2785.2.3.8.1.1.1.1
A list of the Aggregator parameters. This is indexed by OSAP node ID - supporting one Aggregator per OSAP.
OBJECT-TYPE    
  AcDot3adAggEntry  

acDot3adAggNodeIdIndex 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDot3adAggInstanceIndex 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.2
The instance of this aggregator within this OSAP.
OBJECT-TYPE    
  AcAggInstanceIndex  

acDot3adAggMACAddress 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.3
A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.
OBJECT-TYPE    
  MacAddress  

acDot3adAggActorSystemPriority 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.4
A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
OBJECT-TYPE    
  INTEGER 0..65535  

acDot3adAggActorSystemID 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.5
A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).
OBJECT-TYPE    
  MacAddress  

acDot3adAggAggregateOrIndividual 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.6
A read-only Boolean value indicating whether the Aggregator represents an Aggregate (`TRUE') or an Individual link (`FALSE').
OBJECT-TYPE    
  TruthValue  

acDot3adAggActorAdminKey 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.7
The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

acDot3adAggActorOperKey 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.8
The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

acDot3adAggPartnerSystemID 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.9
A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System.
OBJECT-TYPE    
  MacAddress  

acDot3adAggPartnerSystemPriority 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.10
A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.
OBJECT-TYPE    
  INTEGER 0..65535  

acDot3adAggPartnerOperKey 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.11
The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.
OBJECT-TYPE    
  LacpKey  

acDot3adAggCollectorMaxDelay 1.3.6.1.4.1.2785.2.3.8.1.1.1.1.12
The value of this 16-bit read-write attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser, and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1).
OBJECT-TYPE    
  INTEGER 0..65535  

acDot3adAggPortListTable 1.3.6.1.4.1.2785.2.3.8.1.1.2
A table that contains a list of all the ports associated with each Aggregator.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDot3adAggPortListEntry

acDot3adAggPortListEntry 1.3.6.1.4.1.2785.2.3.8.1.1.2.1
A list of the ports associated with a given Aggregator. This is indexed by OSAP node ID - supporting one Aggregator per OSAP.
OBJECT-TYPE    
  AcDot3adAggPortListEntry  

acDot3adAggPortListPorts 1.3.6.1.4.1.2785.2.3.8.1.1.2.1.1
The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.
OBJECT-TYPE    
  PortList  

acDot3adAggPortTable 1.3.6.1.4.1.2785.2.3.8.1.2.1
A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDot3adAggPortEntry

acDot3adAggPortEntry 1.3.6.1.4.1.2785.2.3.8.1.2.1.1
A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
OBJECT-TYPE    
  AcDot3adAggPortEntry  

acDot3adAggPortNodeIdIndex 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDot3adAggPortSlotIndex 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.2
The slot number within the chassis where this module entry resides.
OBJECT-TYPE    
  AcSlotNumber  

acDot3adAggPortPortIndex 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.3
The port number on the module which represents this instance of an Ethernet access port.
OBJECT-TYPE    
  AcPortNumber  

acDot3adAggPortActorSystemPriority 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.4
A 2-octet read-write value used to define the priority value associated with the Actor's System ID.
OBJECT-TYPE    
  INTEGER 0..255  

acDot3adAggPortActorSystemID 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.5
A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.
OBJECT-TYPE    
  MacAddress  

acDot3adAggPortActorAdminKey 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.6
The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

acDot3adAggPortActorOperKey 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.7
The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

acDot3adAggPortPartnerAdminSystemPriority 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.8
A 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  INTEGER 0..255  

acDot3adAggPortPartnerOperSystemPriority 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.9
A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner.
OBJECT-TYPE    
  INTEGER 0..255  

acDot3adAggPortPartnerAdminSystemID 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.10
A 6-octet read-write MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  MacAddress  

acDot3adAggPortPartnerOperSystemID 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.11
A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner.
OBJECT-TYPE    
  MacAddress  

acDot3adAggPortPartnerAdminKey 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.12
The current administrative value of the Key for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  LacpKey  

acDot3adAggPortPartnerOperKey 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.13
The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value.
OBJECT-TYPE    
  LacpKey  

acDot3adAggPortSelectedAggID 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.14
The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.
OBJECT-TYPE    
  AcAggInstanceValue  

acDot3adAggPortAttachedAggID 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.15
The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.
OBJECT-TYPE    
  AcAggInstanceValue  

acDot3adAggPortActorPort 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.16
The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.
OBJECT-TYPE    
  INTEGER 0..65535  

acDot3adAggPortActorPortPriority 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.17
The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
OBJECT-TYPE    
  INTEGER 0..255  

acDot3adAggPortPartnerAdminPort 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.18
The current administrative value of the port number for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  INTEGER 0..65535  

acDot3adAggPortPartnerOperPort 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.19
The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.
OBJECT-TYPE    
  INTEGER 0..65535  

acDot3adAggPortPartnerAdminPortPriority 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.20
The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  INTEGER 0..255  

acDot3adAggPortPartnerOperPortPriority 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.21
The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only.
OBJECT-TYPE    
  INTEGER 0..255  

acDot3adAggPortActorAdminState 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.22
A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-write.
OBJECT-TYPE    
  LacpState  

acDot3adAggPortActorOperState 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.23
A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only.
OBJECT-TYPE    
  LacpState  

acDot3adAggPortPartnerAdminState 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.24
A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-write. The assigned value is used in order to achieve manually configured aggregation.
OBJECT-TYPE    
  LacpState  

acDot3adAggPortPartnerOperState 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.25
A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only.
OBJECT-TYPE    
  LacpState  

acDot3adAggPortAggregateOrIndividual 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.26
A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate (`TRUE') or is only able to operate as an Individual link (`FALSE').
OBJECT-TYPE    
  TruthValue  

acDot3adAggPortStatsTable 1.3.6.1.4.1.2785.2.3.8.1.2.2
A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDot3adAggPortStatsEntry

acDot3adAggPortStatsEntry 1.3.6.1.4.1.2785.2.3.8.1.2.2.1
A list of Link Aggregation Control Protocol statistics for each port on this device.
OBJECT-TYPE    
  AcDot3adAggPortStatsEntry  

acDot3adAggPortStatsLACPDUsRx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.1
The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortStatsMarkerPDUsRx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.2
The number of valid Marker PDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortStatsMarkerResponsePDUsRx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.3
The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortStatsUnknownRx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.4
The number of frames received that either: - carry the Slow Protocols Ethernet Type value (43B.4), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (43B.3), but do not carry the Slow Protocols Ethernet Type. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortStatsIllegalRx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.5
The number of frames received that carry the Slow Protocols Ethernet Type value (43B.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (43B.4). This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortStatsLACPDUsTx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.6
The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortStatsMarkerPDUsTx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.7
The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortStatsMarkerResponsePDUsTx 1.3.6.1.4.1.2785.2.3.8.1.2.2.1.8
The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortDebugTable 1.3.6.1.4.1.2785.2.3.8.1.2.3
A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDot3adAggPortDebugEntry

acDot3adAggPortDebugEntry 1.3.6.1.4.1.2785.2.3.8.1.2.3.1
A list of the debug parameters for a port.
OBJECT-TYPE    
  AcDot3adAggPortDebugEntry  

acDot3adAggPortDebugRxState 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.1
This attribute holds the value `currentRx' if the Receive state machine for the Aggregation Port is in the CURRENT state, `expired' if the Receive state machine is in the EXPIRED state, `defaulted' if the Receive state machine is in the DEFAULTED state, `initialize' if the Receive state machine is in the INITIALIZE state, `lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or `portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only.
OBJECT-TYPE    
  INTEGER currentRx(1), expired(2), defaulted(3), initialize(4), lacpDisabled(5), portDisabled(6)  

acDot3adAggPortDebugLastRxTime 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.2
The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  TimeTicks  

acDot3adAggPortDebugMuxState 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.3
This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
OBJECT-TYPE    
  INTEGER detached(1), waiting(2), attached(3), collecting(4), distributing(5), collectingDistributing(6)  

acDot3adAggPortDebugMuxReason 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.4
A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only.
OBJECT-TYPE    
  DisplayString  

acDot3adAggPortDebugActorChurnState 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.5
The state of the Actor Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and `churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only.
OBJECT-TYPE    
  ChurnState  

acDot3adAggPortDebugPartnerChurnState 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.6
The state of the Partner Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and `churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only.
OBJECT-TYPE    
  ChurnState  

acDot3adAggPortDebugActorChurnCount 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.7
Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortDebugPartnerChurnCount 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.8
Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortDebugActorSyncTransitionCount 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.9
Count of the number of times the Actor's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortDebugPartnerSyncTransitionCount 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.10
Count of the number of times the Partner's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortDebugActorChangeCount 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.11
Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggPortDebugPartnerChangeCount 1.3.6.1.4.1.2785.2.3.8.1.2.3.1.12
Count of the number of times the Partner's perception of the LAG ID (see 43.3.6.1) for this Aggregation Port has changed. This value is read-only.
OBJECT-TYPE    
  Counter32  

acDot3adAggConformance 1.3.6.1.4.1.2785.2.3.8.2
OBJECT IDENTIFIER    

acDot3adAggGroups 1.3.6.1.4.1.2785.2.3.8.2.1
OBJECT IDENTIFIER    

acDot3adAggCompliances 1.3.6.1.4.1.2785.2.3.8.2.2
OBJECT IDENTIFIER    

acDot3adAggGroup 1.3.6.1.4.1.2785.2.3.8.2.1.1
A collection of objects providing information about an aggregation.
OBJECT-GROUP    

acDot3adAggPortListGroup 1.3.6.1.4.1.2785.2.3.8.2.1.2
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

acDot3adAggPortGroup 1.3.6.1.4.1.2785.2.3.8.2.1.3
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

acDot3adAggPortStatsGroup 1.3.6.1.4.1.2785.2.3.8.2.1.4
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

acDot3adAggPortDebugGroup 1.3.6.1.4.1.2785.2.3.8.2.1.5
A collection of objects providing debug information about every aggregated port.
OBJECT-GROUP    

acDot3adTablesLastChangedGroup 1.3.6.1.4.1.2785.2.3.8.2.1.1.6
A collection of objects providing information about the time of changes to the configuration of aggregations and their ports.
OBJECT-GROUP    

acDot3adAggCompliance 1.3.6.1.4.1.2785.2.3.8.2.2.1
This group is optional.
MODULE-COMPLIANCE