AC-CONTROL-MIB

File: AC-CONTROL-MIB.mib (72385 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI
SNMP-FRAMEWORK-MIB AUDIOCODES-TYPES-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY TAddress
DisplayString DateAndTime TEXTUAL-CONVENTION
RowPointer IpAddress Unsigned32
Integer32 enterprises RowStatus
SnmpAdminString audioCodes acRegistrations
acGeneric acProducts acBoardMibs

Defined Types

AcCPMediaRealmEntry  
SEQUENCE    
  acCPMediaRealmIndex Unsigned32
  acCPMediaRealmRowStatus RowStatus
  acCPMediaRealmAction INTEGER
  acCPMediaRealmActionRes INTEGER
  acCPMediaRealmName SnmpAdminString
  acCPMediaRealmIPv4If SnmpAdminString
  acCPMediaRealmIPv6If SnmpAdminString
  acCPMediaRealmPortRangeStart Integer32
  acCPMediaRealmMediaSessionLeg Integer32
  acCPMediaRealmPortRangeEnd Integer32

AcProvisionedCallAgentEntry  
SEQUENCE    
  acProvisionedCallAgentRowStatus Unsigned32
  acProvisionedCallAgentAction Unsigned32
  acProvisionedCallAgentActionResult Unsigned32
  acProvisionedCallAgentIndex Unsigned32
  acProvisionedCallAgentIp SnmpAdminString
  acProvisionedCallAgentPort Unsigned32

AcCallManagerGroupsEntry  
SEQUENCE    
  acCallManagerGroupsIndex Unsigned32
  acCallManagerGroupsRowStatus RowStatus
  acCallManagerGroupsAction Unsigned32
  acCallManagerGroupsActionResult Unsigned32
  acCallManagerGroupsList SnmpAdminString
  acCallManagerGroupsMGCType INTEGER
  acCallManagerGroupsPrimaryMGCIndx Unsigned32
  acCallManagerGroupsSecondaryMGCIndx Unsigned32

AcLocalSwitchingEntry  
SEQUENCE    
  acLocalSwitchingIndex Unsigned32
  acLocalSwitchingRowStatus RowStatus
  acLocalSwitchingPhoneNumber Unsigned32

AcMCNameNumberPhysicalEndpointEntry  
SEQUENCE    
  acMCNameNumberPhysicalEndpointRowStatus Unsigned32
  acMCNameNumberPhysicalEndpointAction Unsigned32
  acMCNameNumberPhysicalEndpointActionResult Unsigned32
  acMCNameNumberPhysicalEndpointIndex Unsigned32
  acMCNameNumberPhysicalEndpointStart Integer32
  acMCNameNumberPhysicalEndpointMin Unsigned32
  acMCNameNumberPhysicalEndpointMax Unsigned32

AcMCNameNumberStreamEndpointEntry  
SEQUENCE    
  acMCNameNumberStreamEndpointRowStatus Unsigned32
  acMCNameNumberStreamEndpointAction Unsigned32
  acMCNameNumberStreamEndpointActionResult Unsigned32
  acMCNameNumberStreamEndpointIndex Unsigned32
  acMCNameNumberStreamEndpointRTPStart Integer32
  acMCNameNumberStreamEndpointATMStart Integer32

AcCallInfoEntry  
SEQUENCE    
  acCallInfoCallIndex Unsigned32
  acCallInfoCallId SnmpAdminString
  acCallInfoMediaType INTEGER
  acCallInfoControlProtocol INTEGER
  acCallInfoDuration Unsigned32

AcCallHierarchyEntry  
SEQUENCE    
  acCallHierarchyCallIndex Integer32
  acCallHierarchyLegType INTEGER
  acCallHierarchyLegID Integer32
  acCallHierarchyRowPointer RowPointer

Defined Values

acControl 1.3.6.1.4.1.5003.9.10.5
Tok_String
MODULE-IDENTITY    

acControlConfiguration 1.3.6.1.4.1.5003.9.10.5.1
OBJECT IDENTIFIER    

acControlCommonConfig 1.3.6.1.4.1.5003.9.10.5.1.1
OBJECT IDENTIFIER    


acCPKeepAlive 1.3.6.1.4.1.5003.9.10.5.1.1.1.1
OBJECT IDENTIFIER    

acCPKeepAliveEnabled 1.3.6.1.4.1.5003.9.10.5.1.1.1.1.1
Enables a proprietary keep-alive mechanism, in which a serviceChange is send with UNDEFINED as the termination ID and restart method. 0 = disable >0 = enable. Access: Instant. AC INI-Param: KEEPALIVEENABLED
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

acCPKeepAliveInterval 1.3.6.1.4.1.5003.9.10.5.1.1.1.1.2
This parameter is used to define the interval in seconds of a KeepAlive message. Access: Instant. AC INI-Param: KEEPALIVEINTERVAL
OBJECT-TYPE    
  Unsigned32 1..300  

acCPTransport 1.3.6.1.4.1.5003.9.10.5.1.1.1.2
OBJECT IDENTIFIER    

acCPTransportType 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.1
Defines the transport type for the control protocol: 0 = UDP 1 = TCP 2 = SCTP. Access: Offline. AC INI-Param: CPTRANSPORTTYPE
OBJECT-TYPE    
  INTEGER acCPTransport-UDP-IP(0), acCPTransport-TCP-IP(1), acCPTransport-SCTP-IP(2)  

acCPTransportRetransmitionTimeOut 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.2
Controls protocols retransmission timeout. Sets the initial time (in msec) for the first retransmission. The retransmission intervals thereafter increase exponentially. Access: Instant. AC INI-Param: MGCPRETRANSMISSIONTIMEOUT
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

acCPTransportControlDiffServ 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.3
Defines the value of the field 'DiffServ' in the IP header for control traffic. Range: 0 to 63. Access: Offline. AC INI-Param: CONTROLDIFFSERV
OBJECT-TYPE    
  Unsigned32 0..63  

acCPTransaction 1.3.6.1.4.1.5003.9.10.5.1.1.1.3
OBJECT IDENTIFIER    

acCPTransactionIDRange 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.1
Defines the range for the transaction ID. Default = 999997999. Access: Instant. AC INI-Param: TRANSACTIONIDRANGE
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acCPTransactionIDBase 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.2
Defines the minimum number for the transaction ID. Default = 2000. Access: Instant. AC INI-Param: TRANSACTIONIDBASE
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acCPTransactionRandomizeID 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.3
Defines if the transactions produced by the board start with a fixed or random number. 1 = Randomize On Refer also to the parameters defining Transaction Id Range and Transaction Id Base. Access: Offline. AC INI-Param: RANDOMIZETRANSACTIONID
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acCPTransactionCommunicationLayerTimeout 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.4
Assumed delay of the communication layer. It is used in retransmission. This parameter defines the maximal time to wait for a response before declaring a disconnection (in seconds). Access: Instant. AC INI-Param: MGCPCOMMUNICATIONLAYERTIMEOUT
OBJECT-TYPE    
  Unsigned32 0..999  

acCPDigitCollect 1.3.6.1.4.1.5003.9.10.5.1.1.2
OBJECT IDENTIFIER    

acCPDigitCollectUseEndOfDTMF 1.3.6.1.4.1.5003.9.10.5.1.1.2.1
Defines if the detection of DTMF events is notified at the end of DTMF or at the start of DTMF. 0 = at start of DTMF 1 = at the end of DTMF. Access: Instant. AC INI-Param: MGCPDTMFDETECTIONPOINT
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

acCPDigitCollectDTMFLength 1.3.6.1.4.1.5003.9.10.5.1.1.2.2
Defines the time to play DTMF (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: DTMFDIGITLENGTH
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

acCPDigitCollectDTMFInterInterval 1.3.6.1.4.1.5003.9.10.5.1.1.2.3
Defines the time between DTMFs played (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: DTMFINTERDIGITINTERVAL
OBJECT-TYPE    
  Unsigned32 0..65535  

acCPDigitCollectMapTimeOutTimer 1.3.6.1.4.1.5003.9.10.5.1.1.2.4
Defines the timeout value (T symbol) in a digit map, in increments of 10. For MEGACO, it's the start timer. For the others, it's the end timer. When the value is -1, it means the hardcoded value (16000). Access: Instant. AC INI-Param: DIGITMAPTIMEOUTTIMER
OBJECT-TYPE    
  Integer32 -1..65535  

acCPDigitCollectMapShortTimer 1.3.6.1.4.1.5003.9.10.5.1.1.2.5
Defines the short timer (S Symbol) value in millisecond, in a digit map.This timer is typically activated when the repetition symbol '.' exists. When the value is -1, it means the hardcoded value (3000). Access: Instant. AC INI-Param: cpDIGITMAPSHORTTIMER
OBJECT-TYPE    
  Integer32 -1..65535  

acCPDigitCollectMapLongTimer 1.3.6.1.4.1.5003.9.10.5.1.1.2.6
Defines the inter-digit long timer (L Symbol) value in millisecond, in a digit map.This timer is typically activated between collected digit when the end of the pattern is not reached yet. When the value is -1, it means the hardcoded value (16000). Access: Instant. AC INI-Param: cpDIGITMAPLONGTIMER
OBJECT-TYPE    
  Integer32 -1..65535  

acCPDigitMap 1.3.6.1.4.1.5003.9.10.5.1.1.3
OBJECT IDENTIFIER    

acCPDigitMapDefaultName 1.3.6.1.4.1.5003.9.10.5.1.1.3.1
Name of the provisioned digit map. Range: String[30]. Access: Offline. AC INI-Param: DIGITMAPNAME
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

acCPDigitMapPatterns 1.3.6.1.4.1.5003.9.10.5.1.1.3.2
The digit map patterns separated by a vertical bar (|), as defined in the MEGACO RFC. Range = String[500]. Access: Offline. AC INI-Param: DIGITMAPPING
OBJECT-TYPE    
  SnmpAdminString Size(0..500)  

acCPDigitMapDialedStringPrefix 1.3.6.1.4.1.5003.9.10.5.1.1.3.3
Defines a prefix to add to the dialed string. Range = String[8]. Access: Instant. AC INI-Param: DialedStringPrefix
OBJECT-TYPE    
  SnmpAdminString Size(0..8)  

acCPNaming 1.3.6.1.4.1.5003.9.10.5.1.1.4
OBJECT IDENTIFIER    

acCPNamingGateWay 1.3.6.1.4.1.5003.9.10.5.1.1.4.1
Defines the media gateway's identification name. MGCP: Gateway's identification name towards the MGCP Call Agent. If undefined, the gateway name holds the IP address of the device. Range: String[63]. Access: Offline. AC INI-Param: GATEWAYNAME
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

acCPNamingEndPoint 1.3.6.1.4.1.5003.9.10.5.1.1.4.2
MGCP: Gateway's endpoint name. This is a prefix used to identify the endpoint, i.e., 'ACgw' in the following example: 'ACgw5@acl.com'. MEGACO: Prefix of the endpoint part of the termination name Range: String[19] Default: MGCP: 'Acgw' MEGACO: 'line' for analog board and '/c' for trunking boards. Access: Offline. AC INI-Param: ENDPOINTNAME
OBJECT-TYPE    
  SnmpAdminString Size(0..19)  

acCPNamingTrunk 1.3.6.1.4.1.5003.9.10.5.1.1.4.3
(MGCP) This parameter generates (together with the parameter defining the Endpoint Prefix) a local endpoint name on trunk-enabled media gateways. (MEGACO) Prefix of the trunk part of the termination name. Range: String[19] Default: MGCP = ' ' (empty string) MEGACO = ' ' for analog boards and 's' for trunking boards. Access: Offline. AC INI-Param: TRUNKNAME
OBJECT-TYPE    
  SnmpAdminString Size(0..19)  

acCPNamingEndpointPrefix 1.3.6.1.4.1.5003.9.10.5.1.1.4.4
(MGCP) This parameter generates (together with parameter Trunk Name) a local endpoint name on trunk-enabled media gateways. Range: String[19]. Access: Offline. AC INI-Param: ENDPOINTPREFIX
OBJECT-TYPE    
  SnmpAdminString Size(0..19)  

acCPNamingCallAgentDomain 1.3.6.1.4.1.5003.9.10.5.1.1.4.5
Defines a domain name to be used to connect with the Call Agent. The parameter takes precedence over the Call Agent IP and the provisioned Call Agent parameters. Range = String[63]. Access: Instant. AC INI-Param: CALLAGENTDOMAINNAME
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

acCPNamingCoderTblFileName 1.3.6.1.4.1.5003.9.10.5.1.1.4.6
This parameter defines the name of an external coders table. In this table, the user can decide which coders will be used in the system. The original file is a text file, and it is converted by DCONVERT to a bynary file. Access: Offline. AC INI-Param: CODERTBLFILENAME
OBJECT-TYPE    
  SnmpAdminString Size(0..47)  

acCPNamingSessionOwner 1.3.6.1.4.1.5003.9.10.5.1.1.4.7
Defines the owner/creator of the session Range = String[31]. Access: Instant. AC INI-Param: CPSDPSESSIONOWNER
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

acCPConference 1.3.6.1.4.1.5003.9.10.5.1.1.5
OBJECT IDENTIFIER    

acCPConferenceMaxUsers 1.3.6.1.4.1.5003.9.10.5.1.1.5.1
Defines the maximal number of users to reserve for a new conference. The actual conference size can be more than this, but never less. Range: 3 to 64. Access: Instant. AC INI-Param: CONFERENCEMAXUSERS
OBJECT-TYPE    
  Unsigned32 3..64  

acCPConferenceMaxSimultaneousSpeakers 1.3.6.1.4.1.5003.9.10.5.1.1.5.2
Defines the maximum number of users that can speak simultaneously in a conference. Range: 1 to 3. Access: Instant. AC INI-Param: CONFERENCEMAXSIMULTANEOUSSPEAKERS
OBJECT-TYPE    
  Unsigned32 1..3  

acCPConferenceSignalGenerationEnable 1.3.6.1.4.1.5003.9.10.5.1.1.5.3
Generates a beep when a participant enters or exits the conference. 0 = Do not generate 1 = Generate. Access: Instant. AC INI-Param: CONFERENCESIGNALGENERATIONENABLE
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

acCPMedia 1.3.6.1.4.1.5003.9.10.5.1.1.6
OBJECT IDENTIFIER    

acCPMediaRTCPInterval 1.3.6.1.4.1.5003.9.10.5.1.1.6.1
Defines the time interval between the adjacent RTCP reports (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: RTCPINTERVAL
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

acCPMediaDefaultCoder 1.3.6.1.4.1.5003.9.10.5.1.1.6.2
This parameter can be used to set a default coder for channel opening. For the legal coder names, refer to the product's User Manual. Default = cpDPT_G711Mulaw_Coder. Access: Instant. AC INI-Param: MGCPDEFAULTCODER
OBJECT-TYPE    
  INTEGER non-Initialized(0), g711Mulaw(1), g711Alaw-64(2), g726-16(3), g726-24(4), g726-32(5), g726-40(6), g727-16(7), g727-24-16(8), g727-24(9), g727-32-16(10), g727-32-24(11), g727-32(12), g727-40-16(13), g727-40-24(14), g727-40-32(15), g723High-(16), g723Low(17), g729(18), g728(19), gSM(20), transparent(21), netCoder-4-8(22), netCoder-5-6(23), netCoder-6-4(24), netCoder-7-2(25), netCoder-8(26), netCoder-8-8(27), netCoder-9-6(28), eVRC0(29), eVRC-TFO(30), eVRC-TTY(31), qCELP-8(32), qCELP-8-TFO(33), qCELP-13(34), qCELP-13-TFO(35), g729E(36), aMR-4-75(37), aMR-5-15(38), aMR-5-9(39), aMR-6-7(40), aMR-7-4(41), aMR-7-95(42), aMR-10-2(43), aMR-12-2(44), gSM-EFR(45), iLBC13(46), iLBC15(47), bV16(48), eVRC(49), telepone-Event-RFC2833(50), redundency-RTP-RFC2198(51), mODEM-Relay(52), comfortNoise-Coder(53), iMAGET38(54), nOOP(55), g722(56), eVRCB(57), eVRC1(58), eVRCB1(59), aMR-WB(60), eVRCB0(61), g7291(62), eg711A(63), eg711U(64), g729B(65), h263(67), h263-1998(68), mP4V-ES(69), h264(70)  

acCPMediaPacketizationPeriod 1.3.6.1.4.1.5003.9.10.5.1.1.6.3
Defines the default packetization period (Frame Size). Default = 20 msec (for G.723 30) Range: 5 to 80. Access: Instant. AC INI-Param: DEFAULTPACKETIZATIONPERIOD
OBJECT-TYPE    
  Unsigned32 5..120  

acCPMediaRecordCoder 1.3.6.1.4.1.5003.9.10.5.1.1.6.4
Determines the coder used for recording to a file. Access: Instant. AC INI-Param: cpRecordCoder
OBJECT-TYPE    
  INTEGER g711Mulaw(1), g711Alaw-64(2)  

acCPMediaPlayCoder 1.3.6.1.4.1.5003.9.10.5.1.1.6.5
Determines the coder type to be used when playing a file of type .raw. Access: Instant. AC INI-Param: cpPlayCoder
OBJECT-TYPE    
  INTEGER g711Mulaw(1), g711Alaw-64(2)  

acCPMediaDefaultRealmName 1.3.6.1.4.1.5003.9.10.5.1.1.6.6
By default, the default CP media realm is the first realm appearing in the CP media realm table. The parameter enables the user to set any of the realms appearing in the table as the default realm. Access: Offline. AC INI-Param: cpDefaultMediaRealmName
OBJECT-TYPE    
  SnmpAdminString Size(0..39)  

acCPMediaDspAllocationMethod 1.3.6.1.4.1.5003.9.10.5.1.1.6.7
determines dsp allocation method in IP to IP call. If this parameter is set to DISABLE_SINGLE_DSP_ALLOCATION (0) , then two IP terminations with the same configuration will not allocate DSPs at all and two terminations with different configuration will cause an allocation of 2 DSPs. If this parameteris set to ENABLE_SINGLE_DSP_ALLOCATION (1), then two IP terminations with the same configuration will not allocate DSPs at all, transcoding with allocation of one DSP will be used if possible, and two terminations with different configuration will cause allocation of 2 DSPs. If this parameter is set to ENFORCE_FULL_DSP_ALLOCATION (2) then two IP terminations with any configuration will cause allocation of two DSPs. Access: Instant. AC INI-Param: CPMEDIARESOURCEOPTIMIZATION
OBJECT-TYPE    
  INTEGER disableSingleDSPAllocation(0), enableSingleDSPAllocation(1), enforceFullDSPAllocation(2)  

acCPMediaRealmTable 1.3.6.1.4.1.5003.9.10.5.1.1.6.21
Control Protocol media realm configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcCPMediaRealmEntry

acCPMediaRealmEntry 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1
Tok_String
OBJECT-TYPE    
  AcCPMediaRealmEntry  

acCPMediaRealmIndex 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.1
Index Field for line. Internal parameter. AC INI-Param: CpMediaRealm_Index
OBJECT-TYPE    
  Unsigned32 0..15  

acCPMediaRealmRowStatus 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.2
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
OBJECT-TYPE    
  RowStatus  

acCPMediaRealmAction 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.3
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
OBJECT-TYPE    
  INTEGER none(0)  

acCPMediaRealmActionRes 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.4
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
OBJECT-TYPE    
  INTEGER succeeded(0)  

acCPMediaRealmName 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.5
A string representing the name of the media realm. Access: Offline. AC INI-Param: CpMediaRealm_MediaRealmName
OBJECT-TYPE    
  SnmpAdminString Size(0..39)  

acCPMediaRealmIPv4If 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.6
The IPv4 interface name corresponding to the one appearing in the interface table. Access: Offline. AC INI-Param: CpMediaRealm_IPv4IF
OBJECT-TYPE    
  SnmpAdminString Size(0..16)  

acCPMediaRealmIPv6If 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.7
The IPv6 interface name corresponding to the one appearing in the interface table. Access: Offline. AC INI-Param: CpMediaRealm_IPv6IF
OBJECT-TYPE    
  SnmpAdminString Size(0..16)  

acCPMediaRealmPortRangeStart 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.8
The starting port for the range of media ports. Access: Offline. AC INI-Param: CpMediaRealm_PortRangeStart
OBJECT-TYPE    
  Integer32 -1..60000  

acCPMediaRealmMediaSessionLeg 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.9
The number of media sessions associated with the range of ports. Access: Offline. AC INI-Param: CpMediaRealm_MediaSessionLeg
OBJECT-TYPE    
  Integer32 -1..6000  

acCPMediaRealmPortRangeEnd 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.10
The ending port for the range of media ports. AC INI-Param: CpMediaRealm_PortRangeEnd
OBJECT-TYPE    
  Integer32 -1..60000  

acCPMisc 1.3.6.1.4.1.5003.9.10.5.1.1.7
OBJECT IDENTIFIER    

acCPMiscDialToneDuration 1.3.6.1.4.1.5003.9.10.5.1.1.7.1
Defines the timeout (in seconds) for the dial tone signal. Range: 1 to 65535. Access: Instant. AC INI-Param: DIALTONEDURATION
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

acCPMiscTrunkIDOffset 1.3.6.1.4.1.5003.9.10.5.1.1.7.2
Sets the offset to the trunk numbering. e.g., Offset = 2 causes the first trunk number to be 2. Note: This parameter was replaced by the parameter 'EP_NUM'. Range: 0 to 4294967295. Access: Offline. AC INI-Param: MEGACOTRUNKIDOFFSET
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acCPMiscCompatibilityProfile 1.3.6.1.4.1.5003.9.10.5.1.1.7.3
ControlS MGCP/MEGACO functioning for vendor-specific compatibility. Refer to the product's User's Manual. Range: Integer > 0 Refer to the product's User's Manual or the enumerator mgTMGCPProfile for possible values. Access: Offline. AC INI-Param: MGCPCOMPATIBILITYPROFILE
OBJECT-TYPE    
  Unsigned32 0..131071  

acCPMiscSDPProfile 1.3.6.1.4.1.5003.9.10.5.1.1.7.4
Controls MGCP/MEGACO functioning for SDP negotiation. The parameter is bitwise. Every new RFC support should be turned on or off with this parameter. Each bit function is described in the control protocol chapter. Access: Instant. AC INI-Param: CPSDPPROFILE
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acCPVxml 1.3.6.1.4.1.5003.9.10.5.1.1.8
OBJECT IDENTIFIER    

acCPVxmlEnableVXML 1.3.6.1.4.1.5003.9.10.5.1.1.8.1
Enables/disables the VXML stack. 0=Disable 1=Enable. Access: Offline. AC INI-Param: EnableVXML
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acProvisionedCallAgent 1.3.6.1.4.1.5003.9.10.5.1.2
OBJECT IDENTIFIER    

acProvisionedCallAgentTable 1.3.6.1.4.1.5003.9.10.5.1.2.1
Magaco Call agents Table.;The table defines the IP and port of each call agent.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values).
OBJECT-TYPE    
  SEQUENCE OF  
    AcProvisionedCallAgentEntry

acProvisionedCallAgentEntry 1.3.6.1.4.1.5003.9.10.5.1.2.1.1
Tok_String
OBJECT-TYPE    
  AcProvisionedCallAgentEntry  

acProvisionedCallAgentRowStatus 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.1
Provisioned call agent table row-status. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 1..1  

acProvisionedCallAgentAction 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.2
Provisioned call agent table action. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..0  

acProvisionedCallAgentActionResult 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.3
Provisioned call agent table result. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..0  

acProvisionedCallAgentIndex 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.4
Megaco Call Agent Id. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..9  

acProvisionedCallAgentIp 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.5
Use this parameter to define a list of up to 10 legal IP addresses separated by ',' or ';' for the ServiceChange command. The gateway starts connecting with the first and in case of failure, attempts the others. Access: Offline. AC INI-Param: PROVISIONEDCALLAGENTS
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acProvisionedCallAgentPort 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.6
Use this parameter to define a list of up to 10 Call Agent UDP ports separated by , or ; for each Call Agent defined by the parameter used to specify the Allowed Call Agent Address. Access: Offline. AC INI-Param: PROVISIONEDCALLAGENTSPORTS
OBJECT-TYPE    
  Unsigned32 0..65535  

acCallManagerGroupsTable 1.3.6.1.4.1.5003.9.10.5.1.2.2
List the trunks in the group. Comma and range can be used
OBJECT-TYPE    
  SEQUENCE OF  
    AcCallManagerGroupsEntry

acCallManagerGroupsEntry 1.3.6.1.4.1.5003.9.10.5.1.2.2.1
Tok_String
OBJECT-TYPE    
  AcCallManagerGroupsEntry  

acCallManagerGroupsIndex 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.1
Call Manager Groups index. AC INI-Param: CPCallManagerGroups_Index
OBJECT-TYPE    
  Unsigned32 1..10  

acCallManagerGroupsRowStatus 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.2
Call Manager Groups table row-status. AC INI-Param: CPCallManagerGroups_RowStatus
OBJECT-TYPE    
  RowStatus  

acCallManagerGroupsAction 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.3
Call Manager Groups table action. AC INI-Param: CPCallManagerGroups_Action
OBJECT-TYPE    
  Unsigned32 0..0  

acCallManagerGroupsActionResult 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.4
Call Manager Groups table result. AC INI-Param: CPCallManagerGroups_ActionRes
OBJECT-TYPE    
  Unsigned32 0..0  

acCallManagerGroupsList 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.5
List the trunks in the group. Comma and range can be used. Access: Offline. AC INI-Param: CPCallManagerGroups_GroupMembersList
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

acCallManagerGroupsMGCType 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.6
0- IP4 CA, 1- DNS (MGCPCallAgentDomainName). Access: Offline. AC INI-Param: CPCallManagerGroups_MGCType
OBJECT-TYPE    
  INTEGER ip4(0), dns(1)  

acCallManagerGroupsPrimaryMGCIndx 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.7
Index of primary MGC in the call agents list. The value 0 means there is no IP. Access: Offline. AC INI-Param: CPCallManagerGroups_PrimaryMGCIndx
OBJECT-TYPE    
  Unsigned32 0..10  

acCallManagerGroupsSecondaryMGCIndx 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.8
Index of secondary MGC in the call agents list. If none - set to 10. Access: Offline. AC INI-Param: CPCallManagerGroups_SecondaryMGCIndx
OBJECT-TYPE    
  Unsigned32 0..10  

acMGCPConfig 1.3.6.1.4.1.5003.9.10.5.1.3
OBJECT IDENTIFIER    

acMGCallAgent 1.3.6.1.4.1.5003.9.10.5.1.3.1
OBJECT IDENTIFIER    

acMGCallAgentIP 1.3.6.1.4.1.5003.9.10.5.1.3.1.1
The Call Agent IP address, in dotted notation, to be used for the initial Restart in Progress (RSIP) message. Set to 0.0.0.0 to avoid sending RSIP. This parameter overrides the BootP server's Call Agent IP address, if provided. Range: Legal IP address. Access: Offline. AC INI-Param: CALLAGENTIP
OBJECT-TYPE    
  IpAddress  

acMGCallAgentPort 1.3.6.1.4.1.5003.9.10.5.1.3.1.2
Defines the Call Agent port number. Defaults to the MGCP default port number of 2427. Range: 0 to 65534. Access: Offline. AC INI-Param: CALLAGENTPORT
OBJECT-TYPE    
  Unsigned32 0..65534  

acMGCallAgentRedundantIP 1.3.6.1.4.1.5003.9.10.5.1.3.1.3
Defines the redundant Call Agent IP address to be used for the initial Restart in Progress message (RSIP). Set to 0.0.0.0 to avoid sending RSIP. Range = IP address in dotted format notation. Access: Offline. AC INI-Param: REDUNDANTAGENTIP
OBJECT-TYPE    
  IpAddress  

acMGCallAgentRedundantPort 1.3.6.1.4.1.5003.9.10.5.1.3.1.4
Defines the redundant Call Agent port number. Defaults to the MGCP default port number of 2427. Access: Offline. AC INI-Param: REDUNDANTAGENTPORT
OBJECT-TYPE    
  Unsigned32 0..65534  

acMGCallAgentRedundantDomainName 1.3.6.1.4.1.5003.9.10.5.1.3.1.5
Defines the redundant MGCP Call Agent domain name. Range = String[63] Default = ' ' (empty string). Access: Instant. AC INI-Param: REDUNDANTCALLAGENTDOMAINNAME
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

acMGCommunication 1.3.6.1.4.1.5003.9.10.5.1.3.2
OBJECT IDENTIFIER    

acMGCommunicationConnectionIDBase 1.3.6.1.4.1.5003.9.10.5.1.3.2.1
Defines the lowest number for the Connection ID values assigned by the media gateway. Access: Offline. AC INI-Param: CONNECTIONIDBASE
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acMGCommunicationConnectionIDRange 1.3.6.1.4.1.5003.9.10.5.1.3.2.2
Defines the range for the Connection ID values assigned by the gateway. Default = 999999999. Access: Offline. AC INI-Param: CONNECTIONIDRANGE
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acMGCommunicationGateWayPort 1.3.6.1.4.1.5003.9.10.5.1.3.2.3
Users can use this parameter to force the media gateway to listen to another UDP port instead of to the original 2427, as defined in RFC 2705. Range = 0 to 65535. Access: Offline. AC INI-Param: GATEWAYMGCPPORT
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

acMGMisc 1.3.6.1.4.1.5003.9.10.5.1.3.3
OBJECT IDENTIFIER    

acMGMiscDigitmapMismatchNotification 1.3.6.1.4.1.5003.9.10.5.1.3.3.1
The MGCP standard defines that if a number does not match the digitmap definition, a notification is not sent. One of the following values: 1 = Send mismatch notification a digital mismatch notification is sent or 0 = Do NOT send mismatch notification a digital mismatch notification is not sent. In the same way, you can enable MGCP to send notifications upon matching digitmap. Access: Instant. AC INI-Param: MGCPSendDigitmapMismatchNotification
OBJECT-TYPE    
  INTEGER doNotSend(0), send(1)  

acMGMiscPiggyBackingEnable 1.3.6.1.4.1.5003.9.10.5.1.3.3.2
This parameter configures the option to send piggy backed commands while RSIPS are sent. For example, if the event is triggered by the board and RSIP was not sent yet, RSIP will be sent and piggy back the event along with it, the call manager will face endpoint restart and than the event. Default = 1 (piggy back on) 0 = commands sent by gateway will not be piggy backed. 1 = commands sent by gateway will be piggy backed. . Access: Offline. AC INI-Param: EnablePiggyBacking
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMGMiscUseWildCardWithRSIP 1.3.6.1.4.1.5003.9.10.5.1.3.3.3
When wildcard is used RSIPs turn in a single message on EndPoint Naming configuration and Single message for each trunk in Trunk Naming configuration. If Off and number of channels is less than 64 RSIP message sent for each Endpoint. 0 = Do not use 1 = Use. Access: Offline. AC INI-Param: UseWildCardWithRSIP
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMGNamePattern 1.3.6.1.4.1.5003.9.10.5.1.3.4
OBJECT IDENTIFIER    

acMGNamePatternEndpoint 1.3.6.1.4.1.5003.9.10.5.1.3.4.1
Defines the endpoint naming pattern for a gateway. The '*' signs will be replaced with an actual endpoint number or with a wild-card sign. The string will contain up to 63 characters. Default value will be 'ACgw*'. . Access: Offline. AC INI-Param: MGCPEndpointNamingPattern
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

acMGNamePatternTrunk 1.3.6.1.4.1.5003.9.10.5.1.3.4.2
Defines the trunk and B-channel naming pattern used by the gateway. The '*' signs will be replaced with a trunk or B-channel number or with a wild-card sign. The string will contain up to 63 characters. Default value will be 'ds*/tr*'. . Access: Offline. AC INI-Param: MGCPTrunkNamingPattern
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

acMegacoConfig 1.3.6.1.4.1.5003.9.10.5.1.4
OBJECT IDENTIFIER    

acLocalSwitching 1.3.6.1.4.1.5003.9.10.5.1.5
OBJECT IDENTIFIER    

acLocalSwitchingTable 1.3.6.1.4.1.5003.9.10.5.1.5.1
Local Switching definitions for analog ports
OBJECT-TYPE    
  SEQUENCE OF  
    AcLocalSwitchingEntry

acLocalSwitchingEntry 1.3.6.1.4.1.5003.9.10.5.1.5.1.1
Tok_String
OBJECT-TYPE    
  AcLocalSwitchingEntry  

acLocalSwitchingIndex 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.1
AC INI-Param: LocalSwitchingPorts_Index
OBJECT-TYPE    
  Unsigned32 0..23  

acLocalSwitchingRowStatus 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.2
AC INI-Param: LocalSwitchingPorts_RowStatus
OBJECT-TYPE    
  RowStatus  

acLocalSwitchingPhoneNumber 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.3
Local Switching definitions for analog ports. Access: Offline. AC INI-Param: LocalSwitchingPorts_PhoneNumber
OBJECT-TYPE    
  Unsigned32  


acMCCommunication 1.3.6.1.4.1.5003.9.10.5.1.4.1.1
OBJECT IDENTIFIER    

acMCCommunicationCheckLegalityOfMGC 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.1
This parameter specifies if MEGACO rejects commands from an MGC not in the provisioned list. 0 = Don't reject unknown MGCs 1 = Reject unknown MGC. Access: Instant. AC INI-Param: MEGACOCHECKLEGALITYOFMGC
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acMCCommunicationGateWayMID 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.2
Defines the media gateway's MID towards the MEGACO Call Agent. If empty or illegal, the MID holds the IP address of the board. Range: String[64]. Access: Offline. AC INI-Param: MEGACO_MID
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

acMCCommunicationServiceChangeProfile 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.3
Specifies the Profile that will be displayed in the MEGACO serviceChange command. At this stage, the profile will not determine the features supported. Range = String[63]. Access: Offline. AC INI-Param: CPSERVICECHANGEPROFILE
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

acMCCommunicationTimer 1.3.6.1.4.1.5003.9.10.5.1.4.1.2
OBJECT IDENTIFIER    

acMCCommunicationTimerMGProvisionalResponse 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.1
Defines the provisional response timer for the media gateway (in msec). Range: 0 to 20000. Access: Instant. AC INI-Param: MGPROVISIONALRESPONSETIME
OBJECT-TYPE    
  Unsigned32 0..20000  

acMCCommunicationTimerMGCProvisionalResponse 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.2
Defines the provisional response timer for the MGC (in msec). Range: 0 to 20000. Access: Instant. AC INI-Param: MGCPROVISIONALRESPONSETIME
OBJECT-TYPE    
  Unsigned32 0..20000  

acMCCommunicationTimerMGExecutionTime 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.3
Defines the estimated execution time of the media gateway (in msec). Range: 0 to 2000. Access: Instant. AC INI-Param: MGEXECUTIONTIME
OBJECT-TYPE    
  Unsigned32 0..2000  

acMCCommunicationTimerMGCExecutionTime 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.4
Defines the estimated execution time of the MGC (in msec). Range: 0 to 2000. Access: Instant. AC INI-Param: MGCEXECUTIONTIME
OBJECT-TYPE    
  Unsigned32 0..2000  

acMCCommunicationTimerHangTermTimeout 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.5
Default timeout (in seconds) for sending Hanging Termination event, when a request for Hanging Termination is sent without parameters. Range - 0 -65535. Access: Instant. AC INI-Param: MEGACOHangTermTimeout
OBJECT-TYPE    
  Unsigned32 0..65535  

acMCCommunicationTimerRestartMaxWaitingDelay 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.6
Defines the Maximum Waiting Delay (in milliseconds) before restart service change when the Media Gateway is powered on. Access: Instant. AC INI-Param: RestartMaximumWaitingDelay
OBJECT-TYPE    
  Unsigned32 0..600000  

acMCCommunicationTimerTargetMgResponseTime 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.7
The response time is defined as the time from the arrival of a call set-up request until the response (in msec). Range = 100-1000 in resolutions of 50 (i.e. 100, 150, 200, 250...). Access: Instant. AC INI-Param: TargetMG_ResponseTime
OBJECT-TYPE    
  Unsigned32 100..1000  

acMCNaming 1.3.6.1.4.1.5003.9.10.5.1.4.2
OBJECT IDENTIFIER    

acMCNamePattern 1.3.6.1.4.1.5003.9.10.5.1.4.2.1
OBJECT IDENTIFIER    

acMCNamePatternPhys 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.1
Defines the name pattern of a physical termination. For Example: 'tgw/t*/c*'. The '*' sign stands for the actual numbers of the trunk and bchannel. Range: String [30]. Access: Offline. AC INI-Param: PHYSTERMNAMEPATTERN
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

acMCNamePatternLogicalRTP 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.2
Defines the name pattern of an RTP termination. For example: 'gw/rtp/*'. The '*' sign stands for the actual number of the RTP termination. Range: String [30]. Access: Offline. AC INI-Param: LOGICALRTPTERMPATTERN
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

acMCNamePatternLogicalATM 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.3
Defines the name pattern of an ATM termination. Range: String [30]. Access: Offline. AC INI-Param: LOGICALATMTERMPATTERN
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

acMCNamePatternConf 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.4
Defines the name pattern of a conference termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: CONFERENCETERMPATTERN
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

acMCNamePatternBCTN 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.5
Defines the name pattern of a BCT termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: BCTTERMPATTERN
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

acMCNamePatternAudio 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.6
Defines the name pattern of an audio termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: AUDIOTERMPATTERN
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

acMCNamePatternTrunkTest 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.7
Defines the name pattern of a trunk test termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: TRUNKTESTTERMPATTERN
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

acMCNameNumber 1.3.6.1.4.1.5003.9.10.5.1.4.2.2
OBJECT IDENTIFIER    

acMCNameNumberEphemeralIDOffset 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.1
Offset for the ephemeral termination IDs in the gateway. e.g., offset = 100 causes the first ephemeral termination ID to be 101. Note: This parameter was replaced by the parameter 'RTP_Num'. Range = 0 to 4294967295. Access: Instant. AC INI-Param: MEGACOTERMINATIONIDOFFSET
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acMCNameNumberPhysicalEndpointTable 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21
Magaco physical endpoint's numbering Table.;The table defines per level (e.g. trunk and channel) the numbering starting point and range.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values).
OBJECT-TYPE    
  SEQUENCE OF  
    AcMCNameNumberPhysicalEndpointEntry

acMCNameNumberPhysicalEndpointEntry 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1
Tok_String
OBJECT-TYPE    
  AcMCNameNumberPhysicalEndpointEntry  

acMCNameNumberPhysicalEndpointRowStatus 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.1
Physical endpoint table row-status. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 1..1  

acMCNameNumberPhysicalEndpointAction 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.2
Physical endpoint table action. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..0  

acMCNameNumberPhysicalEndpointActionResult 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.3
Physical endpoint table result. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..0  

acMCNameNumberPhysicalEndpointIndex 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.4
Index for table use. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..4  

acMCNameNumberPhysicalEndpointStart 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.5
Defines the starting number for each name level (level 0 is the left one when looking at the parameter defining Phys Term Name Pattern). Thus, to start trunk numbering from 1, set EP_NUM_0 to 1. Range: Any positive number. Access: Offline. AC INI-Param: EP_NUM
OBJECT-TYPE    
  Integer32 -1..65535  

acMCNameNumberPhysicalEndpointMin 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.6
Defines the minimum number for each name level (level 0 is the left one, i.e., the trunk number). Access: Offline. AC INI-Param: EP_MIN
OBJECT-TYPE    
  Unsigned32 0..255  

acMCNameNumberPhysicalEndpointMax 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.7
Defines the maximum number for each name level (level 0 is the left one, i.e., the trunk number). Access: Offline. AC INI-Param: EP_MAX
OBJECT-TYPE    
  Unsigned32 0..65535  

acMCNameNumberStreamEndpointTable 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22
Magaco stream endpoint's numbering Table.;The table defines per level the numbering starting point and range.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values).
OBJECT-TYPE    
  SEQUENCE OF  
    AcMCNameNumberStreamEndpointEntry

acMCNameNumberStreamEndpointEntry 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1
Tok_String
OBJECT-TYPE    
  AcMCNameNumberStreamEndpointEntry  

acMCNameNumberStreamEndpointRowStatus 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.1
Stream endpoint table row-status. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 1..1  

acMCNameNumberStreamEndpointAction 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.2
Stream endpoint table action. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..0  

acMCNameNumberStreamEndpointActionResult 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.3
Stream endpoint table result. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..0  

acMCNameNumberStreamEndpointIndex 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.4
Index for table use. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..1  

acMCNameNumberStreamEndpointRTPStart 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.5
Defines the starting number for each name's RTP termination level. Access: Instant. AC INI-Param: RTP_NUM
OBJECT-TYPE    
  Integer32 -1..65535  

acMCNameNumberStreamEndpointATMStart 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.6
Defines the starting number for each ATM termination level name. Range: Any positive number. Access: Instant. AC INI-Param: ATM_NUM
OBJECT-TYPE    
  Integer32 -1..65535  

acMCPoolSize 1.3.6.1.4.1.5003.9.10.5.1.4.3
OBJECT IDENTIFIER    

acMCPoolSizeProvisionedConf 1.3.6.1.4.1.5003.9.10.5.1.4.3.1
Provisioned conference size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. The value is dynamically limited according to the number of DSP channels and the used feature key. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDCONFSIZE
OBJECT-TYPE    
  Unsigned32 0..65535  

acMCPoolSizeProvisionedBCT 1.3.6.1.4.1.5003.9.10.5.1.4.3.2
Provisioned BCT size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDBCTSIZE
OBJECT-TYPE    
  Unsigned32 0..65535  

acMCPoolSizeProvisionedAudio 1.3.6.1.4.1.5003.9.10.5.1.4.3.3
Defines the provisioned audio size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDAUDIOSIZE
OBJECT-TYPE    
  Unsigned32 0..65535  

acMCPoolSizeNumOfTestTrunkPorts 1.3.6.1.4.1.5003.9.10.5.1.4.3.4
Defines the provisioned TT (trunk testing) size indicated by the parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDTRUNKTESTINGSIZE
OBJECT-TYPE    
  Unsigned32 0..65535  

acMCProfile 1.3.6.1.4.1.5003.9.10.5.1.4.4
OBJECT IDENTIFIER    

acMCProfileBinary 1.3.6.1.4.1.5003.9.10.5.1.4.4.1
Used to profile the binary ASN.1 encoding. Range: Integer >0 Refer to the product's User's Manual for possible values. Access: Instant. AC INI-Param: MEGACOASN1PROFILE
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acMCProfileAASPackages 1.3.6.1.4.1.5003.9.10.5.1.4.4.2
Selects the profile for the Advanced Audio Syntax specification. 0 = TD-51 standard 1 = H.248.9 standard 2 = MGCP Packet Cable 3 = SIP MSCML. Access: Offline. AC INI-Param: AASPACKAGESPROFILE
OBJECT-TYPE    
  INTEGER tD-51standard(0), h-248-9standard(1), mGCP-Packet-Cable(2), sIP-MSCML(3)  

acMCProfileTdmHairPinningMode 1.3.6.1.4.1.5003.9.10.5.1.4.4.3
determinewhich Hair-pinning mode is to be used: mode 0 - will create TDM to TDM connection through IP software Loopback mode 1 - will create 'pure' hair-pinning i.e. TDM to TDM connection through PSTN . Access: Offline. AC INI-Param: MegacoTdmHairPinningMode
OBJECT-TYPE    
  INTEGER loopback(0), pstn(1)  

acMCMisc 1.3.6.1.4.1.5003.9.10.5.1.4.5
OBJECT IDENTIFIER    

acMCMiscEncodingMethod 1.3.6.1.4.1.5003.9.10.5.1.4.5.1
Sets the MEGACO coding method. 0 = Text mode. Access: Offline. AC INI-Param: MEGACOENCODING
OBJECT-TYPE    
  INTEGER textEncoding(0)  

acMCMiscContextIDOffset 1.3.6.1.4.1.5003.9.10.5.1.4.5.2
Offset for the context ID generated by the gateway. e.g., offset = 100 causes the first context to be 101. Range = 0 to 4294967295. Access: Instant. AC INI-Param: MEGACOCONTEXTIDOFFSET
OBJECT-TYPE    
  Unsigned32 0..2147483647  

acMCMiscDisconnectBehavior 1.3.6.1.4.1.5003.9.10.5.1.4.5.3
Determines PBX behavior upon losing connectivity with H.248 Call agent or TPNCP. 1 = No Action - keep routing traffic 2 = Disable Trunks - stop routing trafic BUT RTP remains active 3 = Reset Board - Stop all. Access: Offline. AC INI-Param: DisconnectBehavior
OBJECT-TYPE    
  INTEGER noActionOnDisconnect(1), disableTrunksOnDisconnect(2), resetBoardOnDisconnect(3)  

acMCMiscMegacoVersion 1.3.6.1.4.1.5003.9.10.5.1.4.5.4
Determines the maximum Megaco Version number that is supported by the device. Access: Offline. AC INI-Param: MegacoVersion
OBJECT-TYPE    
  SnmpAdminString Size(0..10)  

acMCAMS 1.3.6.1.4.1.5003.9.10.5.1.4.6
OBJECT IDENTIFIER    

acMCAMSNumOfConferencePorts 1.3.6.1.4.1.5003.9.10.5.1.4.6.1
Number Of Conference ports. How many ports on the TPM are allocated to the conferencing service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDCONFSIZE
OBJECT-TYPE    
  Unsigned32 0..5000  

acMCAMSNumOfTestTrunkPorts 1.3.6.1.4.1.5003.9.10.5.1.4.6.2
Number Of Test Trunk ports. How many ports on the TPM are allocated to the Test Trunk service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDTRUNKTESTINGSIZE
OBJECT-TYPE    
  Unsigned32 0..5000  

acMCAMSNumOfLawfulInterceptPorts 1.3.6.1.4.1.5003.9.10.5.1.4.6.3
Number Of Test Trunk ports. How many ports on the TPM are allocated to the Lawful Intercept service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDBCTSIZE
OBJECT-TYPE    
  Unsigned32 0..5000  

acMCAMSNumOfAnnouncementPorts 1.3.6.1.4.1.5003.9.10.5.1.4.6.4
Number Of Test Trunk ports. How many ports on the TPM are allocated to the Announcement service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDAUDIOSIZE
OBJECT-TYPE    
  Unsigned32 0..5000  

acControlStatus 1.3.6.1.4.1.5003.9.10.5.2
OBJECT IDENTIFIER    

acActiveCallAgent 1.3.6.1.4.1.5003.9.10.5.2.1
OBJECT IDENTIFIER    

acActiveCallAgentIp 1.3.6.1.4.1.5003.9.10.5.2.1.1
Megaco Active Call Agent. AC INI-Param: N/A
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

acActiveCallAgentPort 1.3.6.1.4.1.5003.9.10.5.2.1.2
Megaco Active Port. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..32767  

acCurrentCalls 1.3.6.1.4.1.5003.9.10.5.2.2
OBJECT IDENTIFIER    

acCallInfo 1.3.6.1.4.1.5003.9.10.5.2.2.1
OBJECT IDENTIFIER    

acCallInfoTable 1.3.6.1.4.1.5003.9.10.5.2.2.1.1
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    AcCallInfoEntry

acCallInfoEntry 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1
Tok_String
OBJECT-TYPE    
  AcCallInfoEntry  

acCallInfoCallIndex 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.1
The Index of a call. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..5000  

acCallInfoCallId 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.2
Describes the Call ID in the control protocol.For mgcp, string, For megaco asci. AC INI-Param: N/A
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

acCallInfoMediaType 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.3
The type of the media transforming. AC INI-Param: N/A
OBJECT-TYPE    
  INTEGER voice(1), fax(2), modem(3), video(4), transparent(5), conference(6)  

acCallInfoControlProtocol 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.4
The name of the control protocol active now. AC INI-Param: N/A
OBJECT-TYPE    
  INTEGER mgcp(1), megaco(2), sip(3), h323(4)  

acCallInfoDuration 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.5
the duration of a call from the momet it started. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 0..31536000  

acCallHierarchy 1.3.6.1.4.1.5003.9.10.5.2.2.2
OBJECT IDENTIFIER    

acCallHierarchyTable 1.3.6.1.4.1.5003.9.10.5.2.2.2.1
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    AcCallHierarchyEntry

acCallHierarchyEntry 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1
Tok_String
OBJECT-TYPE    
  AcCallHierarchyEntry  

acCallHierarchyCallIndex 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.1
The Index of a call. AC INI-Param: N/A
OBJECT-TYPE    
  Integer32  

acCallHierarchyLegType 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.2
Describes the Type of an end poit. AC INI-Param: N/A
OBJECT-TYPE    
  INTEGER analog(1), digital(2), ip(3), atm(4), h110(5), pci(6)  

acCallHierarchyLegID 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.3
Describes the end point of a call by index. AC INI-Param: N/A
OBJECT-TYPE    
  Integer32 0..20  

acCallHierarchyRowPointer 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.4
A pointer to the right instance in the current Leg table. AC INI-Param: N/A
OBJECT-TYPE    
  RowPointer  

acMegacoStatus 1.3.6.1.4.1.5003.9.10.5.2.3
OBJECT IDENTIFIER    

acMegacoStatusCurrentVersion 1.3.6.1.4.1.5003.9.10.5.2.3.1
The Megaco version currently being used. AC INI-Param: N/A
OBJECT-TYPE    
  Unsigned32 1..3