A3Com-IPXpolicy-r3-MIB

File: A3Com-IPXpolicy-r3-MIB.mib (43172 bytes)

Imported modules

RFC1155-SMI RFC1286-MIB RFC1213-MIB
RFC-1212

Imported symbols

enterprises MacAddress DisplayString
OBJECT-TYPE

Defined Types

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

IPXNET  
OCTET STRING Size(4)    

A3ipxPolControlEntry  
SEQUENCE    
  a3ipxPCPort INTEGER
  a3ipxPCRteAdvCtl INTEGER
  a3ipxPCRteAdvType INTEGER
  a3ipxPCRteRcvCtl INTEGER
  a3ipxPCRteRcvType INTEGER
  a3ipxPCSvcAdvCtl INTEGER
  a3ipxPCSvcAdvType INTEGER
  a3ipxPCSvcRcvCtl INTEGER
  a3ipxPCSvcRcvType INTEGER
  a3ipxPCNbrAdvCtl INTEGER
  a3ipxPCNbrRcvCtl INTEGER
  a3ipxPCNbrRcvType INTEGER
  a3ipxPCPolicyOverride INTEGER
  a3ipxPCSvrRplyCtl INTEGER
  a3ipxPCRipPolOverride INTEGER
  a3ipxPCSapPolOverride INTEGER

A3ipxPolRteEntry  
SEQUENCE    
  a3ipxPolRtePort INTEGER
  a3ipxPolRteType INTEGER
  a3ipxPolRteNet1 IPXNET
  a3ipxPolRteNet2 IPXNET
  a3ipxPolRteStatus RowStatus

A3ipxPolSvcEntry  
SEQUENCE    
  a3ipxPolSvcPort INTEGER
  a3ipxPolSvcEntryType INTEGER
  a3ipxPolSvcSvrName DisplayString
  a3ipxPolSvcType OCTET STRING Size(2)
  a3ipxPolSvcStatus RowStatus

A3ipxPolNbrEntry  
SEQUENCE    
  a3ipxPolNbrPort INTEGER
  a3ipxPolNbrType INTEGER
  a3ipxPolNbrNet IPXNET
  a3ipxPolNbrAddress MacAddress
  a3ipxPolNbrStatus RowStatus

A3ipxPolRipNbrCtlEntry  
SEQUENCE    
  a3ipxPolRipNbrCtlPort INTEGER
  a3ipxPolRipNbrCtlAdvCtl INTEGER
  a3ipxPolRipNbrCtlRcvCtl INTEGER
  a3ipxPolRipNbrCtlRcvType INTEGER

A3ipxPolRipNbrEntry  
SEQUENCE    
  a3ipxPolRipNbrPort INTEGER
  a3ipxPolRipNbrType INTEGER
  a3ipxPolRipNbrNet IPXNET
  a3ipxPolRipNbrAddress MacAddress
  a3ipxPolRipNbrStatus RowStatus

A3ipxPolSapNbrCtlEntry  
SEQUENCE    
  a3ipxPolSapNbrCtlPort INTEGER
  a3ipxPolSapNbrCtlAdvCtl INTEGER
  a3ipxPolSapNbrCtlRcvCtl INTEGER
  a3ipxPolSapNbrCtlRcvType INTEGER

A3ipxPolSapNbrEntry  
SEQUENCE    
  a3ipxPolSapNbrPort INTEGER
  a3ipxPolSapNbrType INTEGER
  a3ipxPolSapNbrNet IPXNET
  a3ipxPolSapNbrAddress MacAddress
  a3ipxPolSapNbrStatus RowStatus

Defined Values

a3Com 1.3.6.1.4.1.43
OBJECT IDENTIFIER    

brouterMIB 1.3.6.1.4.1.43.2
OBJECT IDENTIFIER    

a3ComIPXpol 1.3.6.1.4.1.43.2.11
OBJECT IDENTIFIER    

a3ipxPolNbr 1.3.6.1.4.1.43.2.11.5
OBJECT IDENTIFIER    

a3ipxPolControlTable 1.3.6.1.4.1.43.2.11.1
This table enables and disables the use of policies, policy attributes and the use of trusted neighbors and their attributes.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolControlEntry

a3ipxPolControlEntry 1.3.6.1.4.1.43.2.11.1.1
A single entry in the Policy Control Table
OBJECT-TYPE    
  A3ipxPolControlEntry  

a3ipxPCPort 1.3.6.1.4.1.43.2.11.1.1.1
The port to which this Policy Control entry applies.
OBJECT-TYPE    
  INTEGER  

a3ipxPCRteAdvCtl 1.3.6.1.4.1.43.2.11.1.1.2
The object enables or disables the use of the 'advertisable' entries in the Route Policy Table.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPCRteAdvType 1.3.6.1.4.1.43.2.11.1.1.3
The object specifies whether only those routes listed as 'advertisable' in the Route Policy Table are advertised from this port (normal), or if only those routes that are not listed as 'advertisable' in the Route Policy Table are advertised (inverse).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

a3ipxPCRteRcvCtl 1.3.6.1.4.1.43.2.11.1.1.4
The object enables or disables the use of the 'receivable' entries in the Route Policy Table.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPCRteRcvType 1.3.6.1.4.1.43.2.11.1.1.5
The object specifies whether only those routes listed as 'receivable' in the Route Policy Table are accepted from this port (normal), or if only those routes that are not listed as 'receivable' in the Route Policy Table are accepted (inverse).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

a3ipxPCSvcAdvCtl 1.3.6.1.4.1.43.2.11.1.1.6
The object enables or disables the use of the 'advertisable' entries in the Service Policy Table.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPCSvcAdvType 1.3.6.1.4.1.43.2.11.1.1.7
The object specifies whether only those routes listed as 'advertisable' in the Service Policy Table are advertised from this port (normal), or if only those routes that are not listed as 'advertisable' in the Service Policy Table are advertised (inverse).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

a3ipxPCSvcRcvCtl 1.3.6.1.4.1.43.2.11.1.1.8
The object enables or disables the use of the 'receivable' entries in the Service Policy Table.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPCSvcRcvType 1.3.6.1.4.1.43.2.11.1.1.9
The object specifies whether only those routes listed as 'receivable' in the Service Policy Table are accepted from this port (normal), or if only those routes that are not listed as 'receivable' in the Service Policy Table are accepted (inverse).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

a3ipxPCNbrAdvCtl 1.3.6.1.4.1.43.2.11.1.1.10
This object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors to which routing and service reachability information is advertised. In other words, this object enables or disables the use of those entries in the Neighbor Policy Table for which a3ipxPolNbrType = advertise(2) or both(3). NOTE: this object is not supported by NETBuilders running sw version 8.0 and greater. Its functionality has been replaced by a3ipxRipPolNbrCtlTable and a3ipxSapPolNbrCtlTable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPCNbrRcvCtl 1.3.6.1.4.1.43.2.11.1.1.11
The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which routing and service reachability information is allowed to be received. In other words, this object enables or disables the use of those entries in the Neighbor Policy Table for which a3ipxPolNbrType = receive(2) or both(3). NOTE: this object is not supported by NETBuilders running sw version 8.0 and greater. Its functionality has been replaced by a3ipxRipPolNbrCtlTable and a3ipxSapPolNbrCtlTable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPCNbrRcvType 1.3.6.1.4.1.43.2.11.1.1.12
If this object is set to normal(1), then route and service reachability information is accepted only from those neighbors listed in the Neighbor Policy Table for which a3ipxPolNbrType = receive(2) or both(3). If this object is set to inverse(2), then route and service reachability information is accepted from any neighbor except those neighbors listed in the Neighbor Policy Table for which a3ipxPolNbrType = receive(2) or both(3). NOTE: this object is not supported by NETBuilders running sw version 8.0 and greater. Its functionality has been replaced by a3ipxRipPolNbrCtlTable and a3ipxSapPolNbrCtlTable.
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

a3ipxPCPolicyOverride 1.3.6.1.4.1.43.2.11.1.1.13
Policy Override is used to override the configured policies when the router issues responses to specific RIP or SAP requests. The configured policies are always applied for regular RIP or SAP updates. NOTE: this object is no longer support by NETBuilders running sw version 8.0 and greater. Its functionality has been replaced by a3ipxPCRipPolOverride and a3ipxPCSapPolOverride.
OBJECT-TYPE    
  INTEGER policyOverride(1), noPolicyOverride(2)  

a3ipxPCSvrRplyCtl 1.3.6.1.4.1.43.2.11.1.1.14
This controls whether or not the router is permitted to respond to 'get nearest server' requests. If this object has the value bestSvrReply(1), then this router is permitted to respond to these requests. If this object has the value noBestSvrReply(2), this this router is not permitted to respond to these requests.
OBJECT-TYPE    
  INTEGER bestSvrReply(1), noBestSvrReply(2)  

a3ipxPCRipPolOverride 1.3.6.1.4.1.43.2.11.1.1.15
RIP Policy Override is used to override the configured RIP policies when the router issues responses to specific RIP requests. The configured policies are always applied for regular RIP updates.
OBJECT-TYPE    
  INTEGER policyOverride(1), noPolicyOverride(2)  

a3ipxPCSapPolOverride 1.3.6.1.4.1.43.2.11.1.1.16
SAP Policy Override is used to override the configured policies when the router issues responses to specific SAP requests. The configured policies are always applied for regular SAP updates.
OBJECT-TYPE    
  INTEGER policyOverride(1), noPolicyOverride(2)  

a3ipxPolRteTable 1.3.6.1.4.1.43.2.11.2
The IPX Route Policy Table controls the acceptance of route reachability information from neighbors and the advertisement of route reachability information to neighbors. If a3ipxPCRteRcvType is configured as normal, a route is accepted if the network number for the route is in the list of 'receivable' networks specified in this table. If a3ipxPCRteRcvType is configure as inverse, a route is not accepted if the network number for the route is in the list of 'receivable' networks specified in this table. If a3ipxPCRteAdvType is configured as normal, a route is advertised if the network number for the route is in the list of 'advertisable' networks specified in this table. If a3ipxPCRteAdvType is configure as inverse, a route is not advertised if the network number for the route is in the list of 'advertisable' networks specified in this table. Note, since this table allows ranges of routes to be specified, all the entries should be examined when determining if a specific route is affected by these policies. It is not sufficient to search for an instance of a3ipxPolRteNet1 that matches the route in question.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolRteEntry

a3ipxPolRteEntry 1.3.6.1.4.1.43.2.11.2.1
A single entry in the Route Policy table
OBJECT-TYPE    
  A3ipxPolRteEntry  

a3ipxPolRtePort 1.3.6.1.4.1.43.2.11.2.1.1
The IPX port to which this Receive Route Policy entry applies.
OBJECT-TYPE    
  INTEGER  

a3ipxPolRteType 1.3.6.1.4.1.43.2.11.2.1.2
This object specifies whether this entry applies to receiving routes, advertising routes, or both.
OBJECT-TYPE    
  INTEGER advertise(1), receive(2), both(3)  

a3ipxPolRteNet1 1.3.6.1.4.1.43.2.11.2.1.3
The IPX Network Number for which route information is accepted or rejected for this port. The value 0xfffffffe is used to represent the default route.
OBJECT-TYPE    
  IPXNET  

a3ipxPolRteNet2 1.3.6.1.4.1.43.2.11.2.1.4
When the value of this object is a valid IPX network and different from a3ipxPolRteNet1, then this table entries specifies a range of IPX networks, with the value of a3ipxPolRteNet1 identifying the lower end of the range. If the value of this object is the same as a3ipxPolRteNet1, then this table entry specifies a single IPX network identified by the value of a3ipxPolRteNet1.
OBJECT-TYPE    
  IPXNET  

a3ipxPolRteStatus 1.3.6.1.4.1.43.2.11.2.1.5
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus  

a3ipxPolSvcTable 1.3.6.1.4.1.43.2.11.3
The IPX Policy Services Table controls the acceptance of service reachability information from neighbors and the advertisement of that information to neighbors. If a3ipxPCSvcRcvType is configured as normal, a service is accepted if its port number, server name, and service type is in the list of tuples specified as 'receivable' by this table. If a3ipxPCSvcRcvType is configured as inverse, a service is not accepted if its port number, server name, and service type is in the list of tuples specified as 'receivable' by this table. If a3ipxPCSvcAdvType is configured as normal, a service is advertised if its network port, server name, and service type is in the list of tuples specified as 'advertisable' by this table. If a3ipxPCSvcAdvType is configured as inverse, a service is not advertised if its port number, server name, and service type is in the list of tuples specified as 'advertisable' by this table.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolSvcEntry

a3ipxPolSvcEntry 1.3.6.1.4.1.43.2.11.3.1
A single entry in the Receive Services Policy table.
OBJECT-TYPE    
  A3ipxPolSvcEntry  

a3ipxPolSvcPort 1.3.6.1.4.1.43.2.11.3.1.1
The IPX port to which this Receive Svc Pol entry applies.
OBJECT-TYPE    
  INTEGER  

a3ipxPolSvcEntryType 1.3.6.1.4.1.43.2.11.3.1.2
This object specifies whether this entry applies to receiving services, advertising services, or both.
OBJECT-TYPE    
  INTEGER advertise(1), receive(2), both(3)  

a3ipxPolSvcSvrName 1.3.6.1.4.1.43.2.11.3.1.3
This object contains the name of a server. A single wildcard (*) is allowed at the end of the name.
OBJECT-TYPE    
  DisplayString Size(0..15)  

a3ipxPolSvcType 1.3.6.1.4.1.43.2.11.3.1.4
The type of service for which information is accepted or rejected by this port. The value 'FFFF' acts as a wildcard for all service types.
OBJECT-TYPE    
  OCTET STRING Size(2)  

a3ipxPolSvcStatus 1.3.6.1.4.1.43.2.11.3.1.5
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus  

a3ipxPolNbrTable 1.3.6.1.4.1.43.2.11.4
This table defines a set of neighbors to which the route and service reachability information is advertised. This table also defines a set of neighbors from which route and service reachability information is accepted. NOTE: this table is not supported by NETBuilders running sw version 8.0 and greater. The functionality provided by this table has been replaced by a3ipxPolRipNbrTable and a3ipxPolSapNbrTable.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolNbrEntry

a3ipxPolNbrEntry 1.3.6.1.4.1.43.2.11.4.1
A single entry in the Policy Neighbor Table
OBJECT-TYPE    
  A3ipxPolNbrEntry  

a3ipxPolNbrPort 1.3.6.1.4.1.43.2.11.4.1.1
The IPX port over which the Trusted Neighbor identified by this table entry can be reached.
OBJECT-TYPE    
  INTEGER  

a3ipxPolNbrType 1.3.6.1.4.1.43.2.11.4.1.2
This object specifies whether this entry applies to receiving information, advertising information, or both.
OBJECT-TYPE    
  INTEGER advertise(1), receive(2), both(3)  

a3ipxPolNbrNet 1.3.6.1.4.1.43.2.11.4.1.3
The IPX Network number identifying the network to which the neighbor identified by this table entry is attached.
OBJECT-TYPE    
  IPXNET  

a3ipxPolNbrAddress 1.3.6.1.4.1.43.2.11.4.1.4
The Mac Address of the Neighbor to whom route and service reachability information is to be advertised and from which route and service reachability information is accepted.
OBJECT-TYPE    
  MacAddress  

a3ipxPolNbrStatus 1.3.6.1.4.1.43.2.11.4.1.5
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus  

a3ipxPolRipNbrCtlTable 1.3.6.1.4.1.43.2.11.5.1
This table enables or disables the use of the entries in a3ipxPolRipNbrTable. If the use of the entries in that table is enabled, this table also controls how they are interpreted. In one case, RIP updates are accepted only from those IPX Neighbors listed in a3ipxPolRipNbrTable. In the other case, RIP updates are accepted only from those IPX Neighbors not listed in a3ipxPolRipNbrTable.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolRipNbrCtlEntry

a3ipxPolRipNbrCtlEntry 1.3.6.1.4.1.43.2.11.5.1.1
Each entry in this table applies to a separate NETBuilder port and controls those entries in a3ipxPolRipNbrTable that correspond to the same port.
OBJECT-TYPE    
  A3ipxPolRipNbrCtlEntry  

a3ipxPolRipNbrCtlPort 1.3.6.1.4.1.43.2.11.5.1.1.1
This NETBuilder port to which this RIP Neighbor Control entry applies.
OBJECT-TYPE    
  INTEGER  

a3ipxPolRipNbrCtlAdvCtl 1.3.6.1.4.1.43.2.11.5.1.1.2
This object enables or disables the use of the entries in the RIP Neighbor Policy Table (a3ipxPolRipNbrTable) that apply to neighbors to which routing information is advertised. In other words, this object enables or disables the use of those entries in the Neighbor Policy Table for which a3ipxPolRipNbrType = advertise(2) or both(3).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPolRipNbrCtlRcvCtl 1.3.6.1.4.1.43.2.11.5.1.1.3
The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which routing information is allowed to be received. In other words, this object enables or disables the use of those entries in the Neighbor Policy Table for which a3ipxPolRipNbrType = receive(2) or both(3).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPolRipNbrCtlRcvType 1.3.6.1.4.1.43.2.11.5.1.1.4
If this object is set to normal(1), then route information is accepted only from those neighbors listed in the Neighbor Policy Table for which a3ipxPolRipNbrType = receive(2) or both(3). If this object is set to inverse(2), then route information is accepted from any neighbor except those neighbors listed in the Neighbor Policy Table for which a3ipxPolRipNbrType = receive(2) or both(3).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

a3ipxPolRipNbrTable 1.3.6.1.4.1.43.2.11.5.2
This table defines a set of neighbors to which the route information is advertised. This table also defines a set of neighbors from which route information is accepted.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolRipNbrEntry

a3ipxPolRipNbrEntry 1.3.6.1.4.1.43.2.11.5.2.1
A single entry in the Policy Neighbor Table
OBJECT-TYPE    
  A3ipxPolRipNbrEntry  

a3ipxPolRipNbrPort 1.3.6.1.4.1.43.2.11.5.2.1.1
The IPX port over which the Trusted Neighbor identified by this table entry can be reached.
OBJECT-TYPE    
  INTEGER  

a3ipxPolRipNbrType 1.3.6.1.4.1.43.2.11.5.2.1.2
This object specifies whether this entry applies to receiving information, advertising information, or both.
OBJECT-TYPE    
  INTEGER advertise(1), receive(2), both(3)  

a3ipxPolRipNbrNet 1.3.6.1.4.1.43.2.11.5.2.1.3
The IPX Network number identifying the network to which the neighbor identified by this table entry is attached.
OBJECT-TYPE    
  IPXNET  

a3ipxPolRipNbrAddress 1.3.6.1.4.1.43.2.11.5.2.1.4
The Mac Address of the Neighbor to whom route information is to be advertised and from which route information is accepted.
OBJECT-TYPE    
  MacAddress  

a3ipxPolRipNbrStatus 1.3.6.1.4.1.43.2.11.5.2.1.5
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus  

a3ipxPolSapNbrCtlTable 1.3.6.1.4.1.43.2.11.5.3
This table enables or disables the use of the entries in a3ipxPolSapNbrTable. If the use of the entries in that table is enabled, this table also controls how they are interpreted. In one case, SAP updates are accepted only from those IPX Neighbors listed in a3ipxPolSapNbrTable. In the case, SAP updates are accepted only from those IPX Neighbors not listed in a3ipxPolSapNbrTable.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolSapNbrCtlEntry

a3ipxPolSapNbrCtlEntry 1.3.6.1.4.1.43.2.11.5.3.1
Each entry in this table applies to a separate NETBuilder port and controls those entries in a3ipxPolSapNbrTable that correspond to the same port.
OBJECT-TYPE    
  A3ipxPolSapNbrCtlEntry  

a3ipxPolSapNbrCtlPort 1.3.6.1.4.1.43.2.11.5.3.1.1
This NETBuilder port to which this SAP Neighbor Control entry applies.
OBJECT-TYPE    
  INTEGER  

a3ipxPolSapNbrCtlAdvCtl 1.3.6.1.4.1.43.2.11.5.3.1.2
This object enables or disables the use of the entries in the SAP Neighbor Policy Table (a3ipxPolSapNbrTable) that apply to neighbors to which service reachability information is advertised. In other words, this object enables or disables the use of those entries in the Neighbor Policy Table for which a3ipxPolSapNbrType = advertise(2) or both(3).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPolSapNbrCtlRcvCtl 1.3.6.1.4.1.43.2.11.5.3.1.3
The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which service reachability information is allowed to be received. In other words, this object enables or disables the use of those entries in the Neighbor Policy Table for which a3ipxPolSapNbrType = receive(2) or both(3).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

a3ipxPolSapNbrCtlRcvType 1.3.6.1.4.1.43.2.11.5.3.1.4
If this object is set to normal(1), then service reachability information is accepted only from those neighbors listed in the Neighbor Policy Table for which a3ipxPolSapNbrType = receive(2) or both(3). If this object is set to inverse(2), then service reachability information is accepted from any neighbor except those neighbors listed in the Neighbor Policy Table for which a3ipxPolSapNbrType = receive(2) or both(3).
OBJECT-TYPE    
  INTEGER normal(1), inverse(2)  

a3ipxPolSapNbrTable 1.3.6.1.4.1.43.2.11.5.4
This table defines a set of neighbors to which the service reachability information is advertised. This table also defines a set of neighbors from which service reachability information is accepted.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ipxPolSapNbrEntry

a3ipxPolSapNbrEntry 1.3.6.1.4.1.43.2.11.5.4.1
A single entry in the Policy Neighbor Table
OBJECT-TYPE    
  A3ipxPolSapNbrEntry  

a3ipxPolSapNbrPort 1.3.6.1.4.1.43.2.11.5.4.1.1
The IPX port over which the Trusted Neighbor identified by this table entry can be reached.
OBJECT-TYPE    
  INTEGER  

a3ipxPolSapNbrType 1.3.6.1.4.1.43.2.11.5.4.1.2
This object specifies whether this entry applies to receiving information, advertising information, or both.
OBJECT-TYPE    
  INTEGER advertise(1), receive(2), both(3)  

a3ipxPolSapNbrNet 1.3.6.1.4.1.43.2.11.5.4.1.3
The IPX Network number identifying the network to which the neighbor identified by this table entry is attached.
OBJECT-TYPE    
  IPXNET  

a3ipxPolSapNbrAddress 1.3.6.1.4.1.43.2.11.5.4.1.4
The Mac Address of the Neighbor to whom service reachability information is to be advertised and from which service reachability information is accepted.
OBJECT-TYPE    
  MacAddress  

a3ipxPolSapNbrStatus 1.3.6.1.4.1.43.2.11.5.4.1.5
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus