A3COM-SWITCHING-SYSTEMS-SMT-MIB

File: A3COM-SWITCHING-SYSTEMS-SMT-MIB.mib (14675 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises Counter IpAddress
DisplayString OBJECT-TYPE

Defined Types

A3ComSysSmtFddiMacRateEntry  
SEQUENCE    
  a3ComSysSmtFddiMacRateSmtIndex INTEGER
  a3ComSysSmtFddiMacRateIndex INTEGER
  a3ComSysSmtFddiMacRateByteReceiveRate INTEGER
  a3ComSysSmtFddiMacRatePeakByteReceiveRate INTEGER
  a3ComSysSmtFddiMacRateFrameReceiveRate INTEGER
  a3ComSysSmtFddiMacRatePeakFrameReceiveRate INTEGER
  a3ComSysSmtFddiMacRateByteTransmitRate INTEGER
  a3ComSysSmtFddiMacRatePeakByteTransmitRate INTEGER
  a3ComSysSmtFddiMacRateFrameTransmitRate INTEGER
  a3ComSysSmtFddiMacRatePeakFrameTransmitRate INTEGER

A3ComSysSmtFddiPortEntry  
SEQUENCE    
  a3ComSysSmtFddiPortSmtIndex INTEGER
  a3ComSysSmtFddiPortIndex INTEGER
  a3ComSysSmtFddiPortLocationType INTEGER
  a3ComSysSmtFddiPortLocationTypeIndex INTEGER
  a3ComSysSmtFddiPortLocationLocalIndex INTEGER
  a3ComSysSmtFddiPortLabel DisplayString
  a3ComSysSmtFddiPortSystemPhysicalConnectorId INTEGER

A3ComSysSmtFddiStationModeEntry  
SEQUENCE    
  a3ComSysSmtFddiStationModeIndex INTEGER
  a3ComSysSmtFddiStationModePortIndex INTEGER
  a3ComSysSmtFddiStationModeSelectablePorts INTEGER
  a3ComSysSmtFddiStationModeCurrentMode INTEGER
  a3ComSysSmtFddiStationModeRequestedMode INTEGER

Defined Values

a3Com 1.3.6.1.4.1.43
OBJECT IDENTIFIER    

switchingSystemsMibs 1.3.6.1.4.1.43.29
OBJECT IDENTIFIER    

a3ComSwitchingSystemsMib 1.3.6.1.4.1.43.29.4
OBJECT IDENTIFIER    

a3ComSysSmt 1.3.6.1.4.1.43.29.4.9
OBJECT IDENTIFIER    

a3ComSysSmtCount 1.3.6.1.4.1.43.29.4.9.1
The count of SMTs managed by this agent.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRateTable 1.3.6.1.4.1.43.29.4.9.5
A list of FDDI MAC rate entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports rate statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComSysSmtFddiMacRateEntry

a3ComSysSmtFddiMacRateEntry 1.3.6.1.4.1.43.29.4.9.5.1
An FDDI MAC rate entry contains rate statistics for a particular FDDI MAC managed by this agent. Rate statistics are calculated based on a one second sampling interval.
OBJECT-TYPE    
  A3ComSysSmtFddiMacRateEntry  

a3ComSysSmtFddiMacRateSmtIndex 1.3.6.1.4.1.43.29.4.9.5.1.1
The index of the SMT instance identified by this entry, relative to this agent.
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComSysSmtFddiMacRateIndex 1.3.6.1.4.1.43.29.4.9.5.1.2
The index of the FDDI MAC identified by this entry, within the SMT identified by this entry.
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComSysSmtFddiMacRateByteReceiveRate 1.3.6.1.4.1.43.29.4.9.5.1.3
The average number of bytes received per second by the FDDI MAC identified by this entry during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRatePeakByteReceiveRate 1.3.6.1.4.1.43.29.4.9.5.1.4
The peak value of a3ComSysSmtFddiMacByteReceiveRate since the system was last initialized for the FDDI MAC identified by this entry.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRateFrameReceiveRate 1.3.6.1.4.1.43.29.4.9.5.1.5
The average number of frames received per second by the FDDI MAC identified by this entry during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRatePeakFrameReceiveRate 1.3.6.1.4.1.43.29.4.9.5.1.6
The peak value of a3ComSysSmtFddiMacRateFrameReceiveRate since the system was last initialized for the FDDI MAC identified by this entry.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRateByteTransmitRate 1.3.6.1.4.1.43.29.4.9.5.1.7
The average number of bytes transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRatePeakByteTransmitRate 1.3.6.1.4.1.43.29.4.9.5.1.8
The peak value of a3ComSysSmtFddiMacByteTransmitRate since the system was last initialized for the FDDI MAC identified by this entry.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRateFrameTransmitRate 1.3.6.1.4.1.43.29.4.9.5.1.9
The average number of frames transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiMacRatePeakFrameTransmitRate 1.3.6.1.4.1.43.29.4.9.5.1.10
The peak value of a3ComSysSmtFddiMacFrameTransmitRate since the system was last initialized for the FDDI MAC identified by this entry.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiPortTable 1.3.6.1.4.1.43.29.4.9.6
A list of FDDI port entries. A single entry exists in this list for each FDDI port managed by this agent.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComSysSmtFddiPortEntry

a3ComSysSmtFddiPortEntry 1.3.6.1.4.1.43.29.4.9.6.1
An FDDI port entry contains information about a particular FDDI port managed by this agent.
OBJECT-TYPE    
  A3ComSysSmtFddiPortEntry  

a3ComSysSmtFddiPortSmtIndex 1.3.6.1.4.1.43.29.4.9.6.1.1
The index of the SMT instance identified by this entry, relative to this agent.
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComSysSmtFddiPortIndex 1.3.6.1.4.1.43.29.4.9.6.1.2
The index of the FDDI port identified by this entry, within the SMT identified by this entry.
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComSysSmtFddiPortLocationType 1.3.6.1.4.1.43.29.4.9.6.1.3
The type of location where the FDDI port identified by this entry is physically located.
OBJECT-TYPE    
  INTEGER other(1), modularSlot(2), chassis(3), modularCard(4)  

a3ComSysSmtFddiPortLocationTypeIndex 1.3.6.1.4.1.43.29.4.9.6.1.4
The index of the location identified by the corresponding instance of a3ComSysSmtFddiPortLocationType where the FDDI port identified by this entry is physically located.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiPortLocationLocalIndex 1.3.6.1.4.1.43.29.4.9.6.1.5
The local index of the FDDI port identified by this entry relative to the location specified by the corresponding values of a3ComSysSmtFddiPortLocationType and a3ComSysSmtFddiPortLocationTypeIndex.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiPortLabel 1.3.6.1.4.1.43.29.4.9.6.1.6
An ASCII text string describing the FDDI port identified by this entry.
OBJECT-TYPE    
  DisplayString Size(0..31)  

a3ComSysSmtFddiPortSystemPhysicalConnectorId 1.3.6.1.4.1.43.29.4.9.6.1.7
The actual physical connector that corresponds to the values of a3ComSysSmtFddiPortLocationType a3ComSysSmtFddiPortLocationTypeIndex a3ComSysSmtFddiPortLocationLocalIndex.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiStationModeTable 1.3.6.1.4.1.43.29.4.9.10
An FDDI station Mode table contains information to assign an FDDI Station to DAS(dual attached) or SAS(single attached) mode. The system must be rebooted after all changes to this table are completed in order that the changes take effect.
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComSysSmtFddiStationModeEntry

a3ComSysSmtFddiStationModeEntry 1.3.6.1.4.1.43.29.4.9.10.1
An FDDI Port entry contains information to assign an FDDI Port to an FDDI Station
OBJECT-TYPE    
  A3ComSysSmtFddiStationModeEntry  

a3ComSysSmtFddiStationModeIndex 1.3.6.1.4.1.43.29.4.9.10.1.1
The index of the SMT instance identified by this entry, relative to this agent
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiStationModePortIndex 1.3.6.1.4.1.43.29.4.9.10.1.2
The index of the Port instance identified by this entry, relative to the SMT indentified by this entry.
OBJECT-TYPE    
  INTEGER  

a3ComSysSmtFddiStationModeSelectablePorts 1.3.6.1.4.1.43.29.4.9.10.1.3
An implementation specific entry that corresponds to a port pair, based on the hardware implementation. Only ports with a value of 1 are configurable, those with a value of 0 are not.
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComSysSmtFddiStationModeCurrentMode 1.3.6.1.4.1.43.29.4.9.10.1.4
Indicates the current SAS or DAS mode of the port(s) instance relative to the SMT instance. A value of 1 indicates SAS(M). A value of 2 indicates SAS(S) and a value of 3 indicates DAS.
OBJECT-TYPE    
  INTEGER sas-m(1), sas-s(2), das(3)  

a3ComSysSmtFddiStationModeRequestedMode 1.3.6.1.4.1.43.29.4.9.10.1.5
Indicates the requested mode for a given port pair. A value of 1 indicates a request for SAS(M) for the corresponding pair. A value of 2 indicates SAS(S) and a value of 3 indicates DAS. It should be noted that if requested mode is different than current mode a reboot is required to enable the requested mode. NOTE: reboot can be accomplished using a3ComSysSystemAction.
OBJECT-TYPE    
  INTEGER sas-m(1), sas-s(2), das(3)