A3COM-HUAWEI-TRAP-MIB

File: A3COM-HUAWEI-TRAP-MIB.mib (21925 bytes)

Imported modules

SNMPv2-SMI SNMP-FRAMEWORK-MIB IF-MIB
SNMPv2-TC INET-ADDRESS-MIB A3COM-HUAWEI-OID-MIB

Imported symbols

IpAddress SnmpAdminString ifIndex
ifDescr InterfaceIndex RowStatus
TAddress TruthValue Integer32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
InetAddressType InetAddress h3cCommon

Defined Types

H3cDetailRtTrapEntry  
SEQUENCE    
  h3cDetailRtProType INTEGER
  h3cDetailRtEnable INTEGER

H3cTrapDesInfoEntry  
SEQUENCE    
  h3cTrapDesInfoIndex Integer32
  h3cTrapDesIPAddress IpAddress
  h3cTrapDesPort Integer32
  h3cTrapDesRowStatus RowStatus
  h3cTrapDesAddrTAddress TAddress

H3cTrapConfigEntry  
SEQUENCE    
  h3cTrapConfigIndex Integer32
  h3cTrapConfigName SnmpAdminString
  h3cTrapConfigDescr SnmpAdminString
  h3cTrapConfigSwitch INTEGER

Defined Values

h3cTrap 1.3.6.1.4.1.43.45.1.10.2.38
This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
MODULE-IDENTITY    

h3cTableGroup 1.3.6.1.4.1.43.45.1.10.2.38.1
OBJECT IDENTIFIER    

h3cMacTabStatGroup 1.3.6.1.4.1.43.45.1.10.2.38.1.1
OBJECT IDENTIFIER    

h3cMacTabTrapEnable 1.3.6.1.4.1.43.45.1.10.2.38.1.1.1
Indicates whether h3cMacTabFullTrap and h3cMacTabAlmostFullTrap traps should be generated when the MAC table is filled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cMacTabTrapInterval 1.3.6.1.4.1.43.45.1.10.2.38.1.1.2
Definition of the minimum interval between two traps which occur when the MAC table is full or two traps which occur when the MAC table is almost full.
OBJECT-TYPE    
  Integer32 30..3600  

h3cMacTabTrapInfo 1.3.6.1.4.1.43.45.1.10.2.38.1.1.3
OBJECT IDENTIFIER    

h3cMacTabLen 1.3.6.1.4.1.43.45.1.10.2.38.1.1.3.1
The length of the MAC table.
OBJECT-TYPE    
  Integer32  

h3cMacTabTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.1.4
OBJECT IDENTIFIER    

h3cMacTabFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.1.4.1
Send this trap when the MAC table is filled. The interval between two traps generated should be longer than h3cMacTabTrapInterval.
NOTIFICATION-TYPE    

h3cMacTabAlmostFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.1.4.2
Send this trap when the MAC table is almost full. The interval between two traps generated should be longer than h3cMacTabTrapInterval.
NOTIFICATION-TYPE    

h3cArpTabStatGroup 1.3.6.1.4.1.43.45.1.10.2.38.1.2
OBJECT IDENTIFIER    

h3cArpTabTrapEnable 1.3.6.1.4.1.43.45.1.10.2.38.1.2.1
Indicates whether h3cArpTabFullTrap traps should be generated when the ARP table is filled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cArpTabTrapInterval 1.3.6.1.4.1.43.45.1.10.2.38.1.2.2
Definition of the minimum interval between two traps which occur when the ARP table is filled.
OBJECT-TYPE    
  Integer32 30..3600  

h3cArpTabTrapInfo 1.3.6.1.4.1.43.45.1.10.2.38.1.2.3
OBJECT IDENTIFIER    

h3cArpTabLen 1.3.6.1.4.1.43.45.1.10.2.38.1.2.3.1
The length of the ARP table.
OBJECT-TYPE    
  Integer32  

h3cArpTabTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.2.4
OBJECT IDENTIFIER    

h3cArpTabFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.2.4.1
Send this trap when the ARP table is filled. The interval between two traps generated should be longer than h3cArpTabTrapInterval.
NOTIFICATION-TYPE    

h3cArpPortDynamicEntryFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.2.4.2
Send this trap when the dynamic ARP number of the port exceeds the limitation. The object h3cArpTabLen describes the limitation of the max dynamic ARP number of this port. The interval between two traps should be longer than h3cArpTabTrapInterval.
NOTIFICATION-TYPE    

h3cRtTabStatGroup 1.3.6.1.4.1.43.45.1.10.2.38.1.3
OBJECT IDENTIFIER    

h3cDetailRtTrapTable 1.3.6.1.4.1.43.45.1.10.2.38.1.3.1
This table contains objects to decide what kind of trap should be sent.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDetailRtTrapEntry

h3cDetailRtTrapEntry 1.3.6.1.4.1.43.45.1.10.2.38.1.3.1.1
Entry items
OBJECT-TYPE    
  H3cDetailRtTrapEntry  

h3cDetailRtProType 1.3.6.1.4.1.43.45.1.10.2.38.1.3.1.1.1
The index value which uniquely identifies an entry in the h3cDetailRtTrapTable.
OBJECT-TYPE    
  INTEGER other(1), local(2), rip(3), isis(4), ospf(5), bgp(6)  

h3cDetailRtEnable 1.3.6.1.4.1.43.45.1.10.2.38.1.3.1.1.2
Indicates whether h3cDetailRtTabFullTrap traps should be generated when a specific routing table is filled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cRtTabTrapEnable 1.3.6.1.4.1.43.45.1.10.2.38.1.3.2
Indicates whether h3cRtTabFullTrap traps should be generated when the routing table is filled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cRtTabTrapInterval 1.3.6.1.4.1.43.45.1.10.2.38.1.3.3
Definition of the minimum interval between two traps which occur when the routing table is filled.
OBJECT-TYPE    
  Integer32 30..3600  

h3cRtTabTrapInfo 1.3.6.1.4.1.43.45.1.10.2.38.1.3.4
OBJECT IDENTIFIER    

h3cRtTabLen 1.3.6.1.4.1.43.45.1.10.2.38.1.3.4.1
The length of the routing table. The detail routing tables also use the same object.
OBJECT-TYPE    
  Integer32  

h3cDefaultRtNextHopType 1.3.6.1.4.1.43.45.1.10.2.38.1.3.4.2
The IP address type of the next hop of the default route. The value must be ipv4 or ipv6
OBJECT-TYPE    
  InetAddressType  

h3cDefaultRtNextHop 1.3.6.1.4.1.43.45.1.10.2.38.1.3.4.3
The IP address of the next hop of the default route.
OBJECT-TYPE    
  InetAddress  

h3cDefaultRtOutIf 1.3.6.1.4.1.43.45.1.10.2.38.1.3.4.4
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

h3cRtTabTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.3.5
OBJECT IDENTIFIER    

h3cRtTabFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.3.5.1
Send this trap when the routing table is filled. The interval between two traps generated should be longer than h3cRtTabTrapInterval.
NOTIFICATION-TYPE    

h3cDetailRtTabFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.3.5.2
Send this trap when the detail routing table is filled. The interval between two traps generated should be longer than h3cRtTabTrapInterval.
NOTIFICATION-TYPE    

h3cDefaultRtDelTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.3.5.3
Send this trap when the default route is deleted.
NOTIFICATION-TYPE    

h3cDefaultRtDelTrapEnable 1.3.6.1.4.1.43.45.1.10.2.38.1.3.6
Indicates whether h3cDefaultRtDelTrap traps should be generated when the default route is deleted.
OBJECT-TYPE    
  TruthValue  

h3cMulticastTabStatGroup 1.3.6.1.4.1.43.45.1.10.2.38.1.4
OBJECT IDENTIFIER    

h3cMulticastTabTrapEnable 1.3.6.1.4.1.43.45.1.10.2.38.1.4.1
Indicates whether h3cMulticastTabFullTrap traps should be generated when the multicast table is filled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cMulticastTabTrapInterval 1.3.6.1.4.1.43.45.1.10.2.38.1.4.2
Definition of the minimum interval between two traps which occur when the multicast table is filled.
OBJECT-TYPE    
  Integer32 30..3600  

h3cMulticastTabTrapInfo 1.3.6.1.4.1.43.45.1.10.2.38.1.4.3
OBJECT IDENTIFIER    

h3cMulticastTabType 1.3.6.1.4.1.43.45.1.10.2.38.1.4.3.1
Defining the type of the multicast table, layer2 or layer3.
OBJECT-TYPE    
  INTEGER lay2(1), lay3(2)  

h3cMulticastTabLen 1.3.6.1.4.1.43.45.1.10.2.38.1.4.3.2
The length of the multicast table.
OBJECT-TYPE    
  Integer32  

h3cMulticastTabTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.4.4
OBJECT IDENTIFIER    

h3cMulticastTabFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.4.4.1
Send this trap when the multicast table is filled. The interval between two traps generated should be longer than h3cMulticastTabTrapInterval.
NOTIFICATION-TYPE    

h3cNdTabStatGroup 1.3.6.1.4.1.43.45.1.10.2.38.1.5
OBJECT IDENTIFIER    

h3cNdTabTrapEnable 1.3.6.1.4.1.43.45.1.10.2.38.1.5.1
Indicates whether h3cNdTabFullTrap traps should be generated when the ND table is filled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cNdTabTrapInterval 1.3.6.1.4.1.43.45.1.10.2.38.1.5.2
Definition of the minimum interval between two traps which occur when the ND table is filled.
OBJECT-TYPE    
  Integer32 30..3600  

h3cNdTabTrapInfo 1.3.6.1.4.1.43.45.1.10.2.38.1.5.3
OBJECT IDENTIFIER    

h3cNdTabLen 1.3.6.1.4.1.43.45.1.10.2.38.1.5.3.1
The length of the ND table.
OBJECT-TYPE    
  Integer32  

h3cNdTabTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.5.4
OBJECT IDENTIFIER    

h3cNdTabFullTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.5.4.1
Send this trap when the ND table is filled. The interval between two traps generated should be longer than h3cNdTabTrapInterval.
NOTIFICATION-TYPE    

h3cPeriodicalTrapGroup 1.3.6.1.4.1.43.45.1.10.2.38.1.6
OBJECT IDENTIFIER    

h3cPeriodicalTrapObjects 1.3.6.1.4.1.43.45.1.10.2.38.1.6.1
OBJECT IDENTIFIER    

h3cPeriodicalTrapInterval 1.3.6.1.4.1.43.45.1.10.2.38.1.6.1.1
Definition of the periodical interval. If no trap occurs during the certain interval, an h3cPeriodicalTrap will be generated. If the interval is set to 0, no h3cPeriodicalTrap will be generated.
OBJECT-TYPE    
  Integer32 0 | 10..3600  

h3cPeriodicalTrapSwitch 1.3.6.1.4.1.43.45.1.10.2.38.1.6.1.2
Definition of the periodical switch. If the value is off,the h3cPeriodicalTrap will not be generated. the h3cPeriodicalTrapInterval will be set to 0.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cPeriodicalTrapInfo 1.3.6.1.4.1.43.45.1.10.2.38.1.6.2
OBJECT IDENTIFIER    

h3cPeriodicalNotification 1.3.6.1.4.1.43.45.1.10.2.38.1.6.3
OBJECT IDENTIFIER    

h3cPeriodicalNotificationPrefix 1.3.6.1.4.1.43.45.1.10.2.38.1.6.3.0
OBJECT IDENTIFIER    

h3cPeriodicalTrap 1.3.6.1.4.1.43.45.1.10.2.38.1.6.3.0.1
If no trap occurs during the interval spicified by h3cPeriodicalTrapInterval, an h3cPeriodicalTrap will be generated. If the interval is set to 0, no h3cPeriodicalTrap will be generated.
NOTIFICATION-TYPE    

h3cTrapDesInfo 1.3.6.1.4.1.43.45.1.10.2.38.1.7
OBJECT IDENTIFIER    

h3cTrapDesInfoTable 1.3.6.1.4.1.43.45.1.10.2.38.1.7.1
A table of trap destination host address and port .
OBJECT-TYPE    
  SEQUENCE OF  
    H3cTrapDesInfoEntry

h3cTrapDesInfoEntry 1.3.6.1.4.1.43.45.1.10.2.38.1.7.1.1
The entry of trap destination host address and port.
OBJECT-TYPE    
  H3cTrapDesInfoEntry  

h3cTrapDesInfoIndex 1.3.6.1.4.1.43.45.1.10.2.38.1.7.1.1.1
The index of this table.
OBJECT-TYPE    
  Integer32 1..20  

h3cTrapDesIPAddress 1.3.6.1.4.1.43.45.1.10.2.38.1.7.1.1.2
The host IP address of the trap destination.
OBJECT-TYPE    
  IpAddress  

h3cTrapDesPort 1.3.6.1.4.1.43.45.1.10.2.38.1.7.1.1.3
The port of the trap destination.
OBJECT-TYPE    
  Integer32 0..65535  

h3cTrapDesRowStatus 1.3.6.1.4.1.43.45.1.10.2.38.1.7.1.1.4
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

h3cTrapDesAddrTAddress 1.3.6.1.4.1.43.45.1.10.2.38.1.7.1.1.5
This object contains a transport address.
OBJECT-TYPE    
  TAddress  

h3cTrapConfig 1.3.6.1.4.1.43.45.1.10.2.38.1.8
OBJECT IDENTIFIER    

h3cTrapConfigTable 1.3.6.1.4.1.43.45.1.10.2.38.1.8.1
A table of trap configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cTrapConfigEntry

h3cTrapConfigEntry 1.3.6.1.4.1.43.45.1.10.2.38.1.8.1.1
The entry of trap configuration.
OBJECT-TYPE    
  H3cTrapConfigEntry  

h3cTrapConfigIndex 1.3.6.1.4.1.43.45.1.10.2.38.1.8.1.1.1
The index of this table.
OBJECT-TYPE    
  Integer32 1..2147483647  

h3cTrapConfigName 1.3.6.1.4.1.43.45.1.10.2.38.1.8.1.1.2
The name of the appointed traps.
OBJECT-TYPE    
  SnmpAdminString Size(0..127)  

h3cTrapConfigDescr 1.3.6.1.4.1.43.45.1.10.2.38.1.8.1.1.3
The description of the appointed traps.
OBJECT-TYPE    
  SnmpAdminString Size(0..127)  

h3cTrapConfigSwitch 1.3.6.1.4.1.43.45.1.10.2.38.1.8.1.1.4
Indicates whether the appointed traps should be generated.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)