A3COM-HUAWEI-SNA-DLSW-MIB
File:
A3COM-HUAWEI-SNA-DLSW-MIB.mib (56976 bytes)
Imported modules
Imported symbols
Defined Types
| MacAddressNC |
|
| Represents an 802 MAC address represented in
non-canonical format. That is, the most significant
bit will be transmitted first. If this information
is not available, the value is a zero length string. |
| TEXTUAL-CONVENTION |
|
|
|
| |
OCTET STRING |
Size(0|6) |
|
| EndStationLocation |
|
| Representing the location of an end station related
to the managed DLSw node. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
other(1), internal(2), remote(3), local(4) |
|
| DlcType |
|
| Representing the type of DLC of an end station, if
applicable. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
other(1), na(2), llc(3), sdlc(4), qllc(5) |
|
| LFSize |
|
| The largest size of the INFO field (including DLC header,
not including any MAC-level or framing octets).
64 valid values as defined by the IEEE 802.1D
Addendum are acceptable. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
lfs516(516), lfs1470(1470), lfs1500(1500), lfs2052(2052), lfs4472(4472), lfs8144(8144), lfs11407(11407), lfs11454(11454), lfs17800(17800), unknown(65535) |
|
| CreateLineFlag |
|
| The 'DeleteLine' value means deleting a conceptual row object.
The 'createLine' value means adding a conceptual row object. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
createLine(1), deleteLine(2) |
|
| EntryStatus |
|
| The status of a table entry. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
valid(1), createRequest(2), underCreation(3), invalid(4) |
|
| DlswRemotePeerEntry |
|
| SEQUENCE |
|
|
|
| |
dlswRemotePeerAddr |
IpAddress |
|
| |
dlswRemotePeerVersion |
OCTET STRING |
|
| |
dlswRemotePeerVendorID |
OCTET STRING |
|
| |
dlswRemotePeerPaceWindInit |
Integer32 |
|
| |
dlswRemotePeerNumOfTcpSessions |
Integer32 |
|
| |
dlswRemotePeerVersionString |
DisplayString |
|
| |
dlswRemotePeerIsConfig |
INTEGER |
|
| |
dlswRemotePeerSetStateToConfig |
INTEGER |
|
| |
dlswRemotePeerCost |
Integer32 |
|
| |
dlswRemotePeerKeepAlive |
Integer32 |
|
| |
dlswRemotePeerLf |
LFSize |
|
| |
dlswRemotePeerTcpQueneMax |
Integer32 |
|
| |
dlswRemotePeerHaveBackup |
INTEGER |
|
| |
dlswRemotePeerIsBackup |
INTEGER |
|
| |
dlswRemotePeerBackupAddr |
IpAddress |
|
| |
dlswRemotePeerLinger |
Integer32 |
|
| |
dlswRemotePeerLinkState |
INTEGER |
|
| |
dlswRemotePeerRecvPacks |
Counter32 |
|
| |
dlswRemotePeerSendPacks |
Counter32 |
|
| |
dlswRemotePeerDrops |
Counter32 |
|
| |
dlswRemotePeerUptime |
Counter32 |
|
| |
dlswRemotePeerEntryStatus |
EntryStatus |
|
| DlswBridgeEntry |
|
| SEQUENCE |
|
|
|
| |
dlswBridgeNum |
Integer32 |
|
| |
dlswBridgeStatus |
CreateLineFlag |
|
| DlswBridgeIfEntry |
|
| SEQUENCE |
|
|
|
| |
dlswBridgeIfBriGru |
Integer32 |
|
| |
dlswBridgeIfName |
DisplayString |
|
| |
dlswBridgeIfStatus |
EntryStatus |
|
| DlswLocMacEntry |
|
| SEQUENCE |
|
|
|
| |
dlswLocMacHashIndex |
Integer32 |
|
| |
dlswLocMacHashIndexSeqNum |
Integer32 |
|
| |
dlswLocMacMac |
MacAddressNC |
|
| |
dlswLocMacLocalInterfaceName |
DisplayString |
|
| DlswCircuitEntry |
|
| SEQUENCE |
|
|
|
| |
dlswCircuitS1CircuitId |
Integer32 |
|
| |
dlswCircuitS1Mac |
MacAddressNC |
|
| |
dlswCircuitS1Sap |
OCTET STRING |
|
| |
dlswCircuitS2Mac |
MacAddressNC |
|
| |
dlswCircuitS2Sap |
OCTET STRING |
|
| |
dlswCircuitS1IfIndex |
Integer32 |
|
| |
dlswCircuitS1Ifname |
DisplayString |
|
| |
dlswCircuitS1DlcType |
DlcType |
|
| |
dlswCircuitS2Location |
EndStationLocation |
|
| |
dlswCircuitS2TAddress |
IpAddress |
|
| |
dlswCircuitS2CircuitId |
Integer32 |
|
| |
dlswCircuitOrigin |
INTEGER |
|
| |
dlswCircuitEntryTime |
TimeTicks |
|
| |
dlswCircuitStateTime |
TimeTicks |
|
| |
dlswCircuitState |
INTEGER |
|
| |
dlswCircuitPriority |
INTEGER |
|
| |
dlswCircuitFCSendGrantedUnits |
Integer32 |
|
| |
dlswCircuitFCSendCurrentWndw |
Integer32 |
|
| |
dlswCircuitFCRecvGrantedUnits |
Integer32 |
|
| |
dlswCircuitFCRecvCurrentWndw |
Integer32 |
|
| |
dlswCircuitFCLargestRecvGranted |
Gauge32 |
|
| |
dlswCircuitFCLargestSendGranted |
Gauge32 |
|
| DlswSdlcPortEntry |
|
| SEQUENCE |
|
|
|
| |
dlswSdlcPortSerialName |
DisplayString |
|
| |
dlswSdlcPortEncap |
INTEGER |
|
| |
dlswSdlcPortRole |
INTEGER |
|
| |
dlswSdlcPortVmac |
MacAddressNC |
|
| |
dlswSdlcPortHoldq |
Integer32 |
|
| |
dlswSdlcPortK |
Integer32 |
|
| |
dlswSdlcPortModule |
INTEGER |
|
| |
dlswSdlcPortN1 |
Integer32 |
|
| |
dlswSdlcPortN2 |
Integer32 |
|
| |
dlswSdlcPortPollPauseTimer |
Integer32 |
|
| |
dlswSdlcPortSimultaneousEnable |
INTEGER |
|
| |
dlswSdlcPortT1 |
Integer32 |
|
| |
dlswSdlcPortT2 |
Integer32 |
|
| |
dlswSdlcPortNrziEncoding |
INTEGER |
|
| |
dlswSdlcPortIdleMarkEnable |
INTEGER |
|
| DlswSdlcLsEntry |
|
| SEQUENCE |
|
|
|
| |
dlswSdlcLsAddress |
Integer32 |
|
| |
dlswSdlcLsLocalId |
Integer32 |
|
| |
dlswSdlcLsRemoteMac |
MacAddressNC |
|
| |
dlswSdlcLsSsap |
Integer32 |
|
| |
dlswSdlcLsDsap |
Integer32 |
|
| |
dlswSdlcLsStatus |
EntryStatus |
|
| DlswLlc2PortEntry |
|
| SEQUENCE |
|
|
|
| |
dlswLLC2PortAckDelayTime |
Integer32 |
|
| |
dlswLLC2PortAckMax |
Integer32 |
|
| |
dlswLLC2PortLocalWnd |
Integer32 |
|
| |
dlswLLC2PortModulus |
INTEGER |
|
| |
dlswLLC2PortN2 |
Integer32 |
|
| |
dlswLLC2PortT1 |
Integer32 |
|
| |
dlswLLC2PortTbusyTime |
Integer32 |
|
| |
dlswLLC2PortTpfTime |
Integer32 |
|
| |
dlswLLC2PortTrejTime |
Integer32 |
|
| |
dlswLLC2PortTxqMax |
Integer32 |
|
Defined Values
| dlsw |
1.3.6.1.4.1.43.45.1.2.34 |
| private mib for dlsw |
| MODULE-IDENTITY |
|
|
|
| dlswNode |
1.3.6.1.4.1.43.45.1.2.34.1 |
| OBJECT IDENTIFIER |
|
|
|
| dlswTConn |
1.3.6.1.4.1.43.45.1.2.34.2 |
| OBJECT IDENTIFIER |
|
|
|
| dlswCircuit |
1.3.6.1.4.1.43.45.1.2.34.5 |
| OBJECT IDENTIFIER |
|
|
|
| dlswSdlc |
1.3.6.1.4.1.43.45.1.2.34.6 |
| OBJECT IDENTIFIER |
|
|
|
| dlswLlc2 |
1.3.6.1.4.1.43.45.1.2.34.7 |
| OBJECT IDENTIFIER |
|
|
|
| dlswNodeVersion |
1.3.6.1.4.1.43.45.1.2.34.1.1 |
| This value identifies the particular version of the DLSw
standard supported by this DLSw. The first octet is a
hexadecimal value representing the DLSw standard Version
number of this DLSw, and the second is a hexadecimal value
representing the DLSw standard Release number. This
information is reported in DLSw Capabilities Exchange. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| dlswNodeVendorID |
1.3.6.1.4.1.43.45.1.2.34.1.2 |
| The value identifies the manufacturer's IEEE-assigned
organizationally Unique Identifier (OUI) of this DLSw.
This information is reported in DLSw Capabilities
Exchange. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(3) |
|
| dlswNodeVersionString |
1.3.6.1.4.1.43.45.1.2.34.1.3 |
| This string gives product-specific information about
this DLSw (e.g., product name, code release and fix level).
This flows in Capabilities Exchange messages. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| dlswNodeStdPacingSupport |
1.3.6.1.4.1.43.45.1.2.34.1.4 |
| Circuit pacing, as defined in the DLSw Standard, allows each
of the two DLSw nodes on a circuit to control the amount
of data the other is permitted to send to them. This object
reflects the level of support the DLSw node has for this
protocol. (1) means the node has no support for the standard
circuit pacing flows; it may use RFC 1434+ methods only, or
a proprietary flow control scheme. (2) means the node supports
the standard scheme and can vary the window sizes it grants as
a data receiver. (3) means the node supports the standard
scheme but never varies its receive window size. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), adaptiveRcvWindow(2), fixedRcvWindow(3), unknown(65535) |
|
| dlswNodeStatus |
1.3.6.1.4.1.43.45.1.2.34.1.5 |
| The status of the DLSw part of the system. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), inactive(2) |
|
| dlswNodeUpTime |
1.3.6.1.4.1.43.45.1.2.34.1.6 |
| The amount of time (in hundredths of a second) since
the DLSw portion of the system was last re-initialized.
That is, if dlswState is in the active state,
the time the dlswState entered the active state.
It will remain zero if dlswState is in the
inactive state. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| dlswNodeVirtualSegmentLFSize |
1.3.6.1.4.1.43.45.1.2.34.1.7 |
| The largest frame size (including DLC header and info field
but not any MAC-level or framing octets) this DLSw can forward
on any path through itself. This object can represent any box-
level frame size forwarding restriction (e.g., from the use
of fixed-size buffers). Some DLSw implementations will have
no such restriction.
This value will affect the LF size of circuits during circuit
creation. The LF size of an existing circuit can be found in
the RIF (Routing Information Field). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
LFSize |
|
|
| dlswNodePriority |
1.3.6.1.4.1.43.45.1.2.34.1.9 |
| The priority value of local peer. 65535 expresses the value is unknown |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..5 | 65535 |
|
| dlswNodeInitWindow |
1.3.6.1.4.1.43.45.1.2.34.1.10 |
| The vlaue of init-window. 65535 expresses the value is unknown |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..2000 | 65535 |
|
| dlswNodeKeepAlive |
1.3.6.1.4.1.43.45.1.2.34.1.11 |
| The vlaue of keepalive interval. 65535 expresses the value is unknown |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..2000 | 65535 |
|
| dlswNodeMaxWindow |
1.3.6.1.4.1.43.45.1.2.34.1.12 |
| The value of max-window. 65535 expresses the value is unknown |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..2000 | 65535 |
|
| dlswNodePermitDynamic |
1.3.6.1.4.1.43.45.1.2.34.1.13 |
| To accept connections from non-configured remote peers when
permit-dynamic is setted. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
permitDynamic(1), forbidDynamic(2), unknown(65535) |
|
| dlswNodeConnTimeout |
1.3.6.1.4.1.43.45.1.2.34.1.14 |
| Define connected state timer(The unit is a thousandth of a
second). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..65535 |
|
| dlswNodeLocalPendTimeout |
1.3.6.1.4.1.43.45.1.2.34.1.15 |
| Define connected state timer(The unit is a thousandth of a
second). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..65535 |
|
| dlswNodeRemotePendTimeout |
1.3.6.1.4.1.43.45.1.2.34.1.16 |
| Define connected state timer(The unit is a thousandth of a
second). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..65535 |
|
| dlswNodeSnaCacheTimeout |
1.3.6.1.4.1.43.45.1.2.34.1.17 |
| Define connected state timer(The unit is a thousandth of a
second). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..65535 |
|
| dlswRemotePeerEntry |
1.3.6.1.4.1.43.45.1.2.34.2.1.1 |
| A list of remote peer information |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswRemotePeerEntry |
|
|
| dlswRemotePeerAddr |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.1 |
| The remote peer address for this transport connection. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| dlswRemotePeerVersion |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.2 |
| This value identifies which version (first octet) and release
(second octet) of the DLSw standard is supported by this
partner DLSw. This information is obtained from a DLSw
capabilities exchange message received from the partner DLSw.
A string of zero length is returned before a Capabilities
Exchange message is received, or if one is never received.
A conceptual row with a dlswTConnOperState of `connected' but
a zero length partner version indicates that the partner is
a non-standard DLSw partner.
If an implementation chooses to keep dlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| dlswRemotePeerVendorID |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.3 |
| This value identifies the IEEE-assigned organizationally
Unique Identifier (OUI) of the maker of this partner
DLSw. This information is obtained from a DLSw
capabilities exchange message received from the partner DLSw.
A string of zero length is returned before a Capabilities
Exchange message is received, or if one is never received.
If an implementation chooses to keep dlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(3) |
|
| dlswRemotePeerPaceWindInit |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.4 |
| The value of the partner initial receive pacing window. This
is our initial send pacing window for all new circuits on this
transport connection, as modified and granted by the first flow
control indication the partner sends on each circuit.
This information is obtained from a DLSw capabilities exchange
message received from the partner DLSw.
A value of zero is returned before a Capabilities
Exchange message is received, or if one is never received.
If an implementation chooses to keep dlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| dlswRemotePeerVersionString |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.6 |
| This value identifies the particular product version (e.g.,
product name, code level, fix level) of this partner DLSw.
The format of the actual version string is vendor-specific.
This information is obtained from a DLSw capabilities exchange
message received from the partner DLSw.
A string of zero length is returned before a Capabilities
Exchange message is received, if one is never received, or
if one is received but it does not contain a version string.
If an implementation chooses to keep dlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| dlswRemotePeerIsConfig |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.7 |
| The current remote peer is configrured when the value is 'yes'. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
yes(1), no(2) |
|
| dlswRemotePeerSetStateToConfig |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.8 |
| When the value is set 'yes' from 'no', dlswRemotePeerIsConfig
will change from 'no' to 'yes'. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
yes(1), no(2) |
|
| dlswRemotePeerCost |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.9 |
| The cost for remote peer. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..5 |
|
| dlswRemotePeerLf |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.11 |
| The the largest frame size. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
LFSize |
|
|
| dlswRemotePeerHaveBackup |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.13 |
| There is another remote peer whitch is configrued as the
backup of the current remote peer . |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
yes(1), no(2) |
|
| dlswRemotePeerIsBackup |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.14 |
| The current remote peer is configrued as the
backup of another configured remote peer . |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
yes(1), no(2) |
|
| dlswRemotePeerBackupAddr |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.15 |
| It is the IP ADDRESS of an configured remote peer of whitch
the current remote peer is configrued as the backup |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| dlswRemotePeerLinkState |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.17 |
| The state of this tcp transport connection. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
connecting(1), initCapExchange(2), connected(3), quiescing(4), disconnecting(5), disconnected(6) |
|
| dlswRemotePeerRecvPacks |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.18 |
| The number of Switch-to-Switch Protocol (SSP) messages
received on this tcp transport connection. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| dlswRemotePeerSendPacks |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.19 |
| The number of Switch-to-Switch Protocol (SSP) messages
sent on this tcp transport connection. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| dlswRemotePeerDrops |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.20 |
| The number of Switch-to-Switch Protocol (SSP) messages
dropped on this tcp transport connection. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| dlswRemotePeerUptime |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.21 |
| The amount of time (in seconds ) since this transport
connection last entered the 'connected' state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| dlswRemotePeerEntryStatus |
1.3.6.1.4.1.43.45.1.2.34.2.1.1.22 |
| This object is used by the manager to create
or delete the row entry in the dlswRemotePeerTable
following the EntryStatus textual convention. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EntryStatus |
|
|
| dlswBridgeTable |
1.3.6.1.4.1.43.45.1.2.34.3.1 |
| The list of bridge group whitch has been created. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DlswBridgeEntry |
|
| dlswBridgeEntry |
1.3.6.1.4.1.43.45.1.2.34.3.1.1 |
| The list of bridge information |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswBridgeEntry |
|
|
| dlswBridgeNum |
1.3.6.1.4.1.43.45.1.2.34.3.1.1.1 |
| This value identifies the bridge number . |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..63 |
|
| dlswBridgeStatus |
1.3.6.1.4.1.43.45.1.2.34.3.1.1.2 |
| The 'DeleteLine' value means deleting a conceptual row object.
The 'createLine' value means adding a conceptual row object. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
CreateLineFlag |
|
|
| dlswBridgeIfTable |
1.3.6.1.4.1.43.45.1.2.34.3.2 |
| The list of interfaces on which DLSw is active. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DlswBridgeIfEntry |
|
| dlswBridgeIfEntry |
1.3.6.1.4.1.43.45.1.2.34.3.2.1 |
| The list of bridge interface information |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswBridgeIfEntry |
|
|
| dlswBridgeIfBriGru |
1.3.6.1.4.1.43.45.1.2.34.3.2.1.1 |
| This value identifies the bridge number attached
to the interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..63 |
|
| dlswBridgeIfStatus |
1.3.6.1.4.1.43.45.1.2.34.3.2.1.3 |
| This value whitch is equal to 'invalid' identifies to
delete a conceptual row |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EntryStatus |
|
|
| dlswLocMacTable |
1.3.6.1.4.1.43.45.1.2.34.4.1 |
| This table contains locations of MAC addresses.
They are local and reachable |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DlswLocMacEntry |
|
| dlswLocMacEntry |
1.3.6.1.4.1.43.45.1.2.34.4.1.1 |
| Information of table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswLocMacEntry |
|
|
| dlswCircuitTable |
1.3.6.1.4.1.43.45.1.2.34.5.1 |
| This table is the circuit representation in the DLSw
entity. Virtual data links are used to represent any internal
end stations. There is a conceptual row associated with
each data link. Thus, for circuits without an intervening
transport connection, there are two conceptual rows
for each circuit.
The table consists of the circuits being established,
established, and as an implementation option, circuits that
have been disconnected. For circuits carried over
transport connections, an entry is created after
the CUR_cs was sent or received. For circuits between
two locally attached devices, or internal virtual MAC
addresses, an entry is created when the equivalent of
CUR_cs sent/received status is reached.
End station 1 (S1) and End station 2 (S2) are used to
represent the two end stations of the circuit.
S1 is always an end station which is locally attached.
S2 may be locally attached or remote. If it is locally
attached, the circuit will be represented by two rows indexed
by (A, B) and (B, A) where A & B are the relevant MACs/SAPs.
The table may be used to store the causes of disconnection of
circuits. It is recommended that the oldest disconnected
circuit entry be removed from this table when the memory
space of disconnected circuits is needed. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DlswCircuitEntry |
|
| dlswCircuitEntry |
1.3.6.1.4.1.43.45.1.2.34.5.1.1 |
| the list of circuit information |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswCircuitEntry |
|
|
| dlswCircuitS1CircuitId |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.1 |
| The Circuit ID assigned by this DLSw node to this circuit.
The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw SSP was not used to establish this circuit,
the value will be a string of zero length. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| dlswCircuitS1Mac |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.2 |
| The MAC Address of End Station 1 (S1) used for this circuit. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddressNC |
|
|
| dlswCircuitS1Sap |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.3 |
| The SAP at End Station 1 (S1) used for this circuit. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| dlswCircuitS2Mac |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.4 |
| The MAC Address of End Station 2 (S2) used for this circuit. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddressNC |
|
|
| dlswCircuitS2Sap |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.5 |
| The SAP at End Station 2 (S2) used for this circuit. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| dlswCircuitS1IfIndex |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.6 |
| The ifEntry index of the local interface through which S1
can be reached. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..2147483647 |
|
| dlswCircuitS1Ifname |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.7 |
| The name of the interface whose Ifdex is dlswCircuitS1IfIndex. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| dlswCircuitS1DlcType |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.8 |
| The DLC protocol in use between the DLSw node and S1. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DlcType |
|
|
| dlswCircuitS2Location |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.9 |
| The location of End Station 2 (S2).
If the location of End Station 2 is local, the
interface information will be available in the
conceptual row whose S1 and S2 are the S2 and
the S1 of this conceptual row, respectively. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
EndStationLocation |
|
|
| dlswCircuitS2TAddress |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.10 |
| If the location of End Station 2 is remote,
this object contains the address of the partner
DLSw, else it will be an OCTET STRING of zero length. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| dlswCircuitS2CircuitId |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.11 |
| The Circuit ID assigned to this circuit by the partner
DLSw node. The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw SSP was not used to establish this circuit,
the value will be a string of zero length. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| dlswCircuitOrigin |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.12 |
| This object specifies which of the two end stations
initiated the establishment of this circuit. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
s1(1), s2(2) |
|
| dlswCircuitEntryTime |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.13 |
| The amount of time (in hundredths of a second) since this
circuit table conceptual row was created. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| dlswCircuitStateTime |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.14 |
| The amount of time (in hundredths of a second) since this
circuit entered the current state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| dlswCircuitState |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.15 |
| The current state of this circuit. The agent, implementation
specific, may choose to keep entries for some period of time
after circuit disconnect, so the manager can gather the time
and cause of disconnection.
While all of the specified values may be returned from a GET
operation, the only SETable value is `disconnectPending'.
When this value is set, DLSw should perform the appropriate
action given its previous state (e.g., send HALT_DL if the
state was `connected') to bring the circuit down to the
`disconnected' state. Both the partner DLSw and local end
station(s) should be notified as appropriate.
This MIB provides no facility to re-establish a disconnected
circuit, because in DLSw this should be an end station-driven
function. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disconnected(1), circuitStart(2), resolvePending(3), circuitPending(4), circuitEstablished(5), connectPending(6), contactPending(7), connected(8), disconnectPending(9), haltPending(10), haltPendingNoack(11), circuitRestart(12), restartPending(13) |
|
| dlswCircuitPriority |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.16 |
| The transmission priority of this circuit as understood by
this DLSw node. This value is determined by the two DLSw
nodes at circuit startup time. If this DLSw node does not
support DLSw circuit priority, the value `unsupported' should
be returned. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unsupported(1), low(2), medium(3), high(4), highest(5) |
|
| dlswCircuitFCSendGrantedUnits |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.17 |
| The number of paced SSP messages that this DLSw is currently
authorized to send on this circuit before it must stop and
wait for an additional flow control indication from the
partner DLSw.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| dlswCircuitFCSendCurrentWndw |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.18 |
| The current window size that this DLSw is using in its role
as a data sender. This is the value by which this DLSw would
increase the number of messages it is authorized to send, if
it were to receive a flow control indication with the bits
specifying `repeat window'.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| dlswCircuitFCRecvGrantedUnits |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.19 |
| The current number of paced SSP messages that this DLSw has
authorized the partner DLSw to send on this circuit before
the partner DLSw must stop and wait for an additional flow
control indication from this DLSw.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| dlswCircuitFCRecvCurrentWndw |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.20 |
| The current window size that this DLSw is using in its role
as a data receiver. This is the number of additional paced
SSP messages that this DLSw would be authorizing its DLSw
partner to send, if this DLSw were to send a flow control
indication with the bits specifying `repeat window'.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| dlswCircuitFCLargestRecvGranted |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.21 |
| The largest receive window size granted by this DLSw during
the current activation of this circuit. This is not the
largest number of messages granted at any time, but the
largest window size as represented by FCIND operator bits.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| dlswCircuitFCLargestSendGranted |
1.3.6.1.4.1.43.45.1.2.34.5.1.1.22 |
| The largest send (with respect to this DLSw) window size
granted by the partner DLSw during the current activation of
this circuit.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| dlswSdlcPortTable |
1.3.6.1.4.1.43.45.1.2.34.6.1 |
| The table defines parameters for the interfaces with the
encapunation of SDLC. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DlswSdlcPortEntry |
|
| dlswSdlcPortEntry |
1.3.6.1.4.1.43.45.1.2.34.6.1.1 |
| Information of table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswSdlcPortEntry |
|
|
| dlswSdlcPortEncap |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.2 |
| The encapunation of the interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
sdlc(1), ppp(2), other(3) |
|
| dlswSdlcPortRole |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.3 |
| The SDLC role of interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
primary(1), seconday(2), norole(3) |
|
| dlswSdlcPortHoldq |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.5 |
| Size of hold queue. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
20..255 |
|
| dlswSdlcPortK |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.6 |
| Size of local send window. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..7 |
|
| dlswSdlcPortModule |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.7 |
| Size of modulus. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
m8(8), m128(128) |
|
| dlswSdlcPortN1 |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.8 |
| Max number of bits for incoming frames. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..17680 |
|
| dlswSdlcPortN2 |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.9 |
| Number of timers to retry an operation. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..255 |
|
| dlswSdlcPortPollPauseTimer |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.10 |
| Time between polls for each secondary SDLC station.
The unit is thousandth of a second. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..10000 |
|
| dlswSdlcPortSimultaneousEnable |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.11 |
| Activate SDLC two-way simultaneous mode. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disenable(2) |
|
| dlswSdlcPortT1 |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.12 |
| Time to wait for a reply to a frame. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..60000 |
|
| dlswSdlcPortT2 |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.13 |
| Time to wait for a reply used by secondary station. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..60000 |
|
| dlswSdlcPortNrziEncoding |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.14 |
| Set line code to nrzi encoding mode. |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disenable(2) |
|
| dlswSdlcPortIdleMarkEnable |
1.3.6.1.4.1.43.45.1.2.34.6.1.1.15 |
| Idle in mark mode. |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disenable(2) |
|
| dlswSdlcLsTable |
1.3.6.1.4.1.43.45.1.2.34.6.2 |
| The table defines the virtual MAC addresses for those
SDLC link stations that participate in data link switching. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DlswSdlcLsEntry |
|
| dlswSdlcLsEntry |
1.3.6.1.4.1.43.45.1.2.34.6.2.1 |
| Information of table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswSdlcLsEntry |
|
|
| dlswSdlcLsAddress |
1.3.6.1.4.1.43.45.1.2.34.6.2.1.1 |
| Define SDLC address. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..254 |
|
| dlswSdlcLsLocalId |
1.3.6.1.4.1.43.45.1.2.34.6.2.1.2 |
| The value is XID. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..2147483647 |
|
| dlswSdlcLsRemoteMac |
1.3.6.1.4.1.43.45.1.2.34.6.2.1.3 |
| The MAC address to which DLSw should attempt to connect
this link station. If this information is not available,
a length of zero for this object should be returned |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
MacAddressNC |
|
|
| dlswSdlcLsSsap |
1.3.6.1.4.1.43.45.1.2.34.6.2.1.4 |
| Source SAP of partner. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..254 |
|
| dlswSdlcLsDsap |
1.3.6.1.4.1.43.45.1.2.34.6.2.1.5 |
| Destination SAP of partner. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..254 |
|
| dlswSdlcLsStatus |
1.3.6.1.4.1.43.45.1.2.34.6.2.1.6 |
| This object is used by the manager to create
or delete the row entry in the DlswSdlcLsTable
following the EntryStatus textual convention. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EntryStatus |
|
|
| dlswLlc2PortTable |
1.3.6.1.4.1.43.45.1.2.34.7.1 |
| The table defines parameters for the interfaces with the
encapunation of Llc2. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DlswLlc2PortEntry |
|
| dlswLlc2PortEntry |
1.3.6.1.4.1.43.45.1.2.34.7.1.1 |
| Information of table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DlswLlc2PortEntry |
|
|
| dlswLLC2PortAckDelayTime |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.1 |
| Max time allows I-frames incoming without replay ACK. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..60000 |
|
| dlswLLC2PortAckMax |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.2 |
| Max number of I-frames received before ACK. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..127 |
|
| dlswLLC2PortLocalWnd |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.3 |
| Max number of I-frames to send before received ACK. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..127 |
|
| dlswLLC2PortModulus |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.4 |
| Modulus of LLC2. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
m8(8), m128(128) |
|
| dlswLLC2PortN2 |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.5 |
| Retry times of operations. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..255 |
|
| dlswLLC2PortT1 |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.6 |
| Waiting for ACK time after sent a I-frame. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..60000 |
|
| dlswLLC2PortTbusyTime |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.7 |
| Waiting time while other LLC2 station is in busy state. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..60000 |
|
| dlswLLC2PortTpfTime |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.8 |
| Waiting time after a P frame is sent. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..60000 |
|
| dlswLLC2PortTrejTime |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.9 |
| Waiting time after a REJ frame is sent. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..60000 |
|
| dlswLLC2PortTxqMax |
1.3.6.1.4.1.43.45.1.2.34.7.1.1.10 |
| Queue for sending llc2 I-frames. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
20..200 |
|
| dlswTrapCntlState |
1.3.6.1.4.1.43.45.1.2.34.1.20.1 |
| It is used to indicate whether the DLSw is permitted to emit traps. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| dlswTraps |
1.3.6.1.4.1.43.45.1.2.34.8 |
| OBJECT IDENTIFIER |
|
|
|
| dlswTrapsV2 |
1.3.6.1.4.1.43.45.1.2.34.8.0 |
| OBJECT IDENTIFIER |
|
|
|
| dlswTrapTConnPartnerReject |
1.3.6.1.4.1.43.45.1.2.34.8.0.1 |
| This trap is sent each time a transport connection
is rejected by a partner DLSw during Capabilities
Exchanges. The emission of this trap is controlled
by dlswTrapCntlState. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| dlswTrapTConnChangeState |
1.3.6.1.4.1.43.45.1.2.34.8.0.2 |
| This trap is sent each time a transport connection
changes state. The emission of this trap
is controlled by dlswTrapCntlState. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| dlswTrapCircuitChangeState |
1.3.6.1.4.1.43.45.1.2.34.8.0.3 |
| This trap is sent each time a circuit change
state. The emission of this trap is controlled by
dlswTrapCntlState. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|